URBAN CONVENTION HOTEL DESIGN CRITERIA AND

A DESIGN PROPOSAL FOR ANKARA CASE

A THESIS SUBMITTED TO
THE GRADUATE SCHOOL OF NATURAL AND
APPLIED SICENCES
OF
MIDDLE EAST TECHNICAL UNIVERSITY

BY

GZEM BALIKCIOLU

IN PARTIAL FULFILLMENT OF THE REQUIREMENTS

FOR THE DEGREE OF MASTER OF SCIENCE,
IN ARCHITECTURE

SEPTEMBER 2004

Approval of the Graduate School of Natural and Applied Sciences

Prof. Dr. Canan zgen

Director

I certify that this thesis satisfies all the requirements as a thesis for the degree of
Master of Architecture.

Prof. Dr. Selahattin nr

Head of Department

This is to certify that we have read this thesis and that in our opinion it is fully
adequate, in scope and quality, as a thesis for the degree of Master of Architecture.

Part-time Inst. lhan Kural

Supervisor
Examining Committee Members
Assoc. Prof. Dr. Ali Cengizkan

(Chairman)

Part-time Inst. lhan Kural

(M.E.T.U.)

Assoc. Prof. Dr. Abdi Gzer

(M.E.T.U.)

Assoc. Prof. Dr. Gven A. Sargn

(M.E.T.U.)

Cumhur Keskinok

(Architect)

I hereby declare that all information in this document has been obtained and
presented in accordance with academic rules and ethical conduct. I also declare that,
as required by these rules and conduct, I have fully cited and referenced all material
and results that are not original to this work.

Name, Last name : Gizem Balkcolu

Signature

iii

ABSTRACT

URBAN CONVENTION HOTEL DESIGN

CRITERIA AND A DESIGN PROPOSAL FOR
ANKARA CASE

Gizem, Balkolu

M.Arch.; Department of Architecture

Supervisor: Part-time Inst. lhan Kural
September, 2004 154 Pages

The aim of this study is to define the design criteria for urban convention
hotels based on national and international market trends. The second aim is to design
an efficient, flexible, and valid convention hotel program for Ankara case based on
this research. The existing hotel structures in Ankara are assumed to be insufficient
to meet the convention requirements of international and national market needs.
In the study, the space requirements of different markets and their program
matrix reflected on major convention hotels in different continents are analyzed. The
basic design criteria in terms of architectural space requirements and functional
needs of the venues are defined. The economical, social and cultural impacts of the
iv

convention hotels in urban scale are listed in order to define a sustainable and
efficient program in city scale.
A feasibility study is done based on the space requirements, user groups and
use frequencies of the convention venues in capital city. The second assumption of
this study was that Ankara needed a 500 room convention hotel in order to
accommodate the existing and future tourism stock of the city. A program based on
the requirements of prior research is prepared and a design proposal is given for a
site located in Ankara.

Keywords: Convention Hotel, Convention Tourism, National and International

Markets, Design Criteria.

KONGRE OTELLER TASARIM KRTERLER VE ANKARA

LENDE BR KONGRE OTEL NERS

Gizem, Balkolu

Yksek Lisans; Mimarlk Fakltesi

Tez Yneticisi: r. Gr. lhan Kural
Eyll 2004, 154 Sayfa

Bu tezin birinci amac uluslararas ve ulusal ticari ynelimlere bal kalarak

kongre otellerinin tasarm kriterlerinin belirlenmesidir. Tezin ikinci amac ise bu
kriterlere bal kalarak, Ankara leinde gnn artlarna uyum salayabilen,
verimli ve kullanm asndan srndrlebilir bir kongre oteli programnn
oluturulmasdr.
Farkl

kongre

amalarnn

ve

kullanm

tipolojilerinin

aratrlmas

erevesinde, farkl ktalarda sregelen kullanm emalar ve bu emalara bal

olarak ekillenen otel rnekleri incelenmitir. Aratrma kapsamnda, kongre
vi

otellerinin kullanm ihtiyalarndan doan mimari standartlar ve mekan ihtiyalar

irdelenmitir. Bu balamda kongre otelinin ekonomik, sosyal ve kltrel etkileri ve
bu etkilerin ehir hayatna yansmalar aratrlmtr.
Bir bakent olarak Ankarann kongre oteline olan ihtiyacnn belirlenmesi
amac ile fizibilite aratrmas yaplm ve Ankara ehrinin turist profili
tanmlanmtr. Ankarada bir kongre otelinin yaplmas durumunda gerekli mekan
ihtiyac, ehre zg kullanm emalar aratrlm ve aratrmalar erevesinde 500
odal bir kongre otelinin gereklilii ortaya kmtr.

Anahtar Kelimeler: Kongre Oteli, Kongre Turizmi, Ulusal ve Uluslararas Turizm

Ynelimleri, Tasarm Kriterleri.

vii

To My Family,

viii

ACKNOWLEDGEMENTS

I wish to express my sincere gratitude to lhan Kural, the supervisor of this

thesis, for his continual encouragement and valuable criticism, suggestions all
throughout the work.
I would like to express my grateful thanks to Mualla Erkl, Cana Bilsel for
their expert advice, encouragement and valuable information they have provided. I
wish to thank to the jury members for their valuable criticisms and contributions to
my thesis.
I would like to express my deepest appreciation to Mr. Enis ncolu, Engin
ncolu, Cem Altnz and nder Kaya for their support and valuable time they
have provided.

ix

TABLE OF CONTENTS

PLAGIARISM.....iii
ABSTRACT....iv
Z....vi
ACKNOWLEDGEMENTS.............ix
TABLE OF CONTENTS.........x
LIST OF FIGURES........xii

CHAPTER
1.INTRODUCTION.........1

2. CASE STUDY WITH RESPECT TO DIFFERENT TRENDS IN

CONVENTION INDUSTRY....8
2.1 Introduction.........8
2.2 Evolution of Convention Hotel in America..........10
2.3 Convention Trends in Europe.......22
2.4 Convention Trends in Asia.......23
2.5 Convention Trends in Turkey ......29
2.6 Selected Convention Centres .......35

3. THE IMPACT OF CONVENTION ACTIVITY IN URBAN SCALE.40

3.1 The Economical Impact ...........40
3.2 The Social Impact ....40
3.3 The Cultural Impact .........41

4. DESIGN CRITERIA FOR CONVENTION HOTELS..........43

4.1 Site Characteristics .......43

4.2 The Guest Floors ..........51
4.3 Public Space Design .....68
4.4 Convention Hall Design .......74

5. FEASIBILITY STUDY FOR CONSTRUCTION OF A CONVENTION

HOTEL IN ANKARA...82
5.1 Market Research ..................82
5.2 Existing Facilities ....84
5.3 Meeting Trends With Respect to Continents and Space
Requirements of International Convention Market .........86
5.4 Meeting Trends With Respect to Continents and Space
Requirements of National Convention Market .........93
5.5 Existing Situation and The Venue Need in Ankara .....94
5.6 Local Factors and Analysis of Potential Sites ..97
5.7 Competition for Convention Market ....97
5.8 Catchment Areas of Ankara .....97

6. A CONVENTION HOTEL PROPOSAL FOR ANKARA CASE....99

6.1 The Site Analysis of the Selected Location Based On
Feasibility Study .... 99
6.2 Detailed Description of the Facility Program ........101
6.3 Design Decisions............102

APPENDICES
A. LIST OF HOTEL, MEETING ROOM AND EXHIBITION HALL
CAPACITIES IN ANKARA..........126
B. CONVENTION DENSITY DISTRIBUTION GRAPHICS WITH
RESPECT TO CONTINENTS AND COUNTRIES......127
C. BUILDING PROGRAM FOR A 500 ROOM CONVENTION HOTEL
IN ANKARA..130

BIBLIOGRAPHY...137

xi

LIST OF FIGURES

1. Hyatt Regency Hotel; Ohare, Rosemont...12

2. Marriott Marquis Hotel, Atlanta.15
3. Hyatt Regency Dallas, Reunion.....16
4. Hyatt Regency Dallas, Forth Worth .........19
5. Hyatt Regency Chicago, Illinois.....20
6. San Diego Convention Hotel, San Diego.......21
7. Hotel Rey Huan Carlos, Barcelona.....24
8. The Raffles City Master Plan Axonometric View......26
9. Raffles City Stamford Hotel, Singapore.....27
10. Hyatt Regency, Osaka.....28
11. Hilton Convention Hotel, Istanbul......31
12. The Diamond of Istanbul Convention Centre and Hotel, Istanbul..31
13. Conrad Hotel, Istanbul.....32
14. Swiss Hotel, Istanbul.......32
15. Sheraton Convention Centre and Hotel, Ankara.........34
16. Vancouver Convention Centre, Vancouver.....38
17. Sun-tec Convention Centre, Singapore.......38
18. Ltfi Krdar Convention Centre, Istanbul.......39
19. Hyatt Regency San Antonio, River Centre.........46
20. Hyatt Regency Washington D.C.....47
21. Marriott Marquis Philadelphia, Pennsylvania.........55
22. Guest Room plans of Westin Chain of Raffles Hotel Complex......57
23. Hyatt San Francisco, Atlanta ..........59
24. The Guest Rooms Plans (Bellagio Hotel-Las Vegas, Hyatt........64
Washington, Sheraton-Toronto, Hyatt-San Francisco)
25. Framework of International Transport Lanes....106
xii

26. Framework of Transport Lanes in Ankara.....107

27. Framework of Ankara Subway and Light-rail Transport System......108
28. Zones of Settlement ..............109
29. Main Points of Attraction.......110
30. Design Strategy.......111
31. Reference Sheet for Site Images.....112
32. Site Photos..........113
33. Site Plan 1/500........114
34. Ground Floor Plan 1/500....115
35. First Floor Plan 1/500.....116
36. Second Floor Plan 1/500....117
37. Third Floor Plan 1/500...118
38. Fourth Floor Plan 1/500.....119
39. Typical Guest Room Floors 1/500.....120
40. Section 1/500......121
41. South Elevation 1/500............122
42. West Elevation 1/500 ............123
43. East Elevation 1/500 .........124
44. Views From 1/500 Site Model.......125

xiii

CHAPTER 1

INTRODUCTION
In the beginning of the twentieth century the emergence of international air
transport system changed the face of the world economy. From this moment on,
business was no longer limited within the borders of a single continent. This
innovation effected major sectors of commerce. The definition of territories were redefined not only in mass production but in education and tourisms as well. The share
of know-how, knowledge and cultures have found a new way to be spread.
This new vision expressed itself first in the construction of production lines in
different continents. Then product launches and strategic company meetings started
to be held in order to keep the organizational unity all over the world. These
meetings found their architectural medium in convention centres where this demand
shifted into business hotels where the meeting and lodging facilities were unified
under one roof.
Continent wise share of information not only showed itself in company
meetings but also in educational, political and commercial fields as well. These
meetings reached large numbers when international and national meetings were
calculated in total. Being located in a geographical key location, Turkey is named as
the political and economical gateway to the Middle East. As the capital of a strategic
country, Ankara can not make use of its full potential to attract the desired number of
conventions. The main reason for this problem is that the necessary investments for
the infrastructural and super structural investments havent been made for years. The
existing hotel stock in Ankara is not sufficient to serve the needs of a mid-scale
international convention.
Depending on the International Congress and Convention Organizers
Association 2003 Survey, the destinations have to first supply the necessary venue
conditions in order to attract mid and large scale conventions. This thesis was proven
by a local tourism plan that has been launched in stanbul. The private investors have
been giving emphasis to business and meeting tourism in the last fifteen years where
1

the lodging capacity of stanbul is increasing ten to fifteen percent each year. By the
help of programmed development and promotion, stanbul has increased its shared
of convention tourism by twelve percent. 1
Therefore, the aim of this thesis is to define the national and international
convention market trends in order to maintain a flexible, sustainable and efficient
program that fits the needs of twentieth century downtown convention hotels.
In this respect, the existing and expected market trends in convention sector
are searched via the analysis of the reflection of the different functions on existing
convention hotels. The course of problems that have been faced along construction,
improvement and management periods are evaluated within a series of case studies.
By this way, the space requirements of different convention needs and how they
found shape within different continents have been analyzed.
Since the beginning of the nineteenth century convention centres and
convention hotels have been the closest competitors of each other. In scope of the
market research, the drive forces of these two facilities are compared. As a result of
the comparison, it is seen that the convention hotel reflects itself as an economically
more sustainable building type with a variety of mix of uses. The economical
survival of hotels are more common where the convention centres suffer the problem
of being abandoned in out of season periods. On the other hand, the convention
centres give a more flexible and function specific structure which are meeting
oriented. The means of unification of positive sides of each facility is searched
through a design proposal in the end of the thesis.
During the research process, architectural standards of design components of
a convention hotel are examined. The site specifications, necessary area
requirements, definitions of public and private spaces and their location within a
hotel are analyzed depending on the scale of the project. The organizational structure
of companies and the hierarchy of different levels of management are reflected on
the facades, dimensions and different levels of the hotel. Unlike other business hotels
the convention hotel has a rather communal life in space organisations and
dimensions. If this can not be seen in the private spaces, the reflection of this can be
viewed in hospitality suites that are scattered at sub-levels that separate the public
spaces from the private guest rooms.
1

Republic of Turkey, Prime Ministry State Institute of Statistics (DIE), February 2004 Tourism
Report; Tourism Statistics Bulletins (DIE: 2004)

In order to make a statement on the future trends and expectations on the

national convention industry in Ankara, the statistical values of Prime Ministry State
Institute of Statistics and personal interviews with the banquet and meeting
organisers of the forthcoming business hotels have been utilized. Firsthand
information from the convention organizers in Ankara showed that a total of 35 midscale conventions are held in Ankara each year which are national. An average of
sixty percent of the rooms are fully occupied in season which lasts from September
to August. In summer seasons the venues are occupied by weddings and graduation
parties. As banquet organization bureaus of Sheraton and Hilton hotels state, the
convention organizers have a high demand of exhibit space and a banquet hall of
1200 m2.2 Feasibility studies on Ankara have showed that the capital city does not
have the necessary venue capacity to fulfil these needs. The largest meeting room in
Ankara belongs to Head Office of Highways and M.T.A. head office with 600
people. These halls are not divisible and are not accompanied by any exhibit halls.
On the other hand, the largest exhibit halls in capital city is Altnpark Expo Centre
which is six kilometres away from the city centre and is not accompanied by any
hotels in close distance. Being isolated from city centre, these venues are far away
from being sustainable in terms of management.
Yet, the investments in business tourism and meeting venues in Ankara prove
that the convention tourism is expected to gain vivacity. Within the year 2003, three
major hotel in Ankara have gone into renovations. The managements of Stad Hotel
and Grand Ankara Hotel have changed into international chains. Following the
architectural competition for the expansion of the Atatrk Culture and Convention
Centre with a 1400 seat conference centre and 800 theatre hall, Sheraton Ankara
Hotel has increased its venue area by a 1200 m2 convention hall and added a total of
100 rooms to its existing site. The Grand Ankara Hotel and The Stad Hotel could
only upgrade the guestrooms due to lack of space.
In the light of these investigations and future predictions, a 500 room
convention hotel proposal is designed in the last chapter of the thesis. The hotel is

Author, interview with zaygen Asl, Conference and Banquet Sales Executive, Ankara HiltonSA,
(ankaya:Ankara) 05.03.2004.
Author, interview with Ugur Grer, Sales Manager for Banquet and Meeting Facilities, Sheraton
Ankara, (ankaya: Ankara), 05.03.2004
For detailed information please refer to Appendix A, List of Hotel and Meeting Room Capacities in
Ankara.

supposed to house the most essential need of the capital city which is a 1500m2
exhibit hall and a 1200 m2 column free banquet hall.
The ease of access from the transportation means, closeness to major focal
points and centres of the city and potential growth of the site as a focal point is taken
to be major considerations in the choice of the site. Ulus, Kzlay and Tunal Hilmi
Districts have been examined as the potential sites for a convention hotel where as
the restricted site conditions and high density settlement was not appropriate for
future growth of a new function. The investments done for the second phase of the
subway and light railway systems have given clues on the growth pattern of the city.
The intersection points of these two transport systems cerate their second largest hub
point at the junction of Eshiehir and Konya Roads. The junction brings together a
mix of uses like Armada shopping mall, Bayndr Hospital, buildings of political
buildings and governmental settlements. The location is surrounded by commercial
and residential zones at two sides of the road.
The basic requirements of convention centres which are ease of
transportation, access to focal points of the city and closeness to meeting venues are
met on this site. The hospital, government and commercial functions with close
settlements of university campuses create a wide user profile both for the guest floors
and meeting rooms of the hotel.
The site characteristics show that the growth pattern of the location is in
favour of fulfilling the entertainment needs of the city with temporary music halls
and newly constructed entertainment centres. A wide range of user groups and
functions utilize the site which is an advantage for the economical sustainability of
the hotel.
The basic handicap of the district is the separation of the two sides of the
district by a highway. Thus the unification of the functions on the both sides of the
road is obscured. This problem is expected to be resolved as the use patterns and
density of the site becomes clear.
Ankara can be named as an artificially constructed capital city. After the
declaration of foundation of the Republic of Turkey, Ankara became the
representative of a modern, improved city that had the iconography of the ideals of a
completely new nation. Within the first twenty years all the social, cultural and
economical formations were re-constructed within the framework of this ideology.

The Jansen master plan built the backbone of this reconstruction imposing a new
lifestyle into the city.
Within eighty years, Ankara has gone into different stages of modernization.
The Jansen Plan and the North-South axis of the system has physically fulfilled its
lifetime where the city begins to transform the west axis. The urban cores that are
connected along North-South axis are losing its strength due to segregation of user
groups. It is not possible to talk about a strong urban core today which is the result of
the linear growth of the city through government buildings. The west axis will suffer
the same problems in the future creating a fourth self standing urban core. Each
building on the axis experiences a significant isolation from the Eskisehir Road
which ends up with an urban corridor. As a result, the west corridor can not generate
an integrated urban fabric with the city. The clear span, uncut highway system
connected to Central Kzlay Core is one of the basic reasons of this problem. The
highway creates a higher scale of transportation route within the urban structure
which leads the designers to isolate the entrances in safer secondary entrances rather
than the main axis itself. The west axis brings an access solution that does not fit the
required use pattern of the city. Unfortunately, this urban growth system becomes a
solution schema that generates an automatic growth pattern for Ankara. The highway
axis must be broken down into smaller networks along Eskiehir Road within a
master plan otherwise this problem will be the inevitable destiny of the west axis.
A possible solution of this problem is to expand existing break points on
Eskiehir Road. In this manner, the Armada junction holds a strong potential with its
mixed use fabric, transportation means and its connections to the rest of the city.
Possibilities of access, variety, choice of functions and availability of green spaces
like A.O. (Atatrk Forest Farm) and parks of M.T.A. (General Directorate of
Mineral Research and Exploration) brings out this site as an urban junction that has
the potential to convert not only the west axis but the city as well.
The second problem is the idea of bringing the Eskiehir Road down to a
more manageable and adoptable scale in terms of urban access. Within twenty to
thirty years the west corridor will become the second largest boulevard that
dominates the city. But evaluating this axis merely as an extension of Jansen plan is a
wrong idea. The basic concepts that form the daily life today are totally different
when compared to 1920s. The construction of the city has become more dependent
on private entrepreneurs rather than the government itself. Moreover, the foreign
5

companies that were once situated in Ankara moved their offices to stanbul. The
driving economy of

Ankara became dependent on education and scientific

background. Today, the iconography of Modern Turkey represents itself in the

education and scientific institutions of capital. Each year thousands of people migrate
to capital due to education purposes. On the other hand, many educated people leave
the city to work in rather industrialized cities like stanbul and zmir. It is a common
youth that for better growth and regain of investments, this educated population must
be kept with in the city.
Education can be a generative force for Ankara on west axis. Instead of the
strict, closed order governmental buildings, education buildings must be preferred.
The reflection of republic requires a fresh, modern approach that takes feedback from
the requirements of the 21st century. The social structure in Ankara already gives us
the clues on the future requirements of the city. Ankara is known as the city of white
collared people. Although many attempts have been made to attract the industries
and entrepreneurs, the basis of economy remains to be universities, scientific
institutes and government based cycles.
Scientific research facilities and hospitals are known as the clean production
facilities of 21st century. They dont have transportation, export and import problems
since IT technologies, medical researches are material free and knowledge based.
The production facilities, laboratories and software companies require office like
environments and silicon valleys that are a new kind of typology. They can be
integrated into the city and located close to residential buildings.
Inspired by the inherit social structure of Ankara, I strongly believe that the
potential of west axis must be evaluated under a topic of education and science axis.
The number and type of education facilites is a must. Means of share of information
between scientific institutions and investors is necessary in this respect in order to
attract private organisations to the city.
The junction of Eskiehir Road and Konya Road is the ideal location as the
core of this master plan that spans towards The Middle East Technical University.
The newly constructed Ankara Chamber of Commerce Convention Centre and the
existing green park, A.O.. farm build a solid background for the healthy growth of
the centre with green spaces.
These potentials of the site are evaluated for the choice of a site for a
convention centre. The hotel plays a vital role within a conceptual master plan of an
6

education axis or a cyber park that grows along the west axis. The hotel was
proposed as a landmark representing the share of ideas and invitations of different
perspectives into the site.
As a conclusion of the research it can be stated that simple construction of a
convention centre is not enough to change the character of west axis for Ankara. The
proposal in this thesis is given as a complementary part of a large scale master plan
that is derived from the future expectations on urban scale.
The construction site of the project is chosen as the Sotzu-Balgat Road
junction which is located opposite to Ankara Chamber of Commerce. The site is
14.000 m2 in base and chosen because of its optimum access conditions.
The design proposal of convention hotel aimed to solve the conceptual
problem of unification of delegates under one roof. The hotel is not merely
considered as commercial complex but as a remedy to serve the meeting space need
of Ankara. The convention tourism named as the tourism of highest the income, is
expected to support the economical condition of the city providing extra surplus that
is necessary for the future investments of infrastructure.
It is accepted that simple construction convention hotels are not sufficient for
attraction of international conventions but it is proposed as a means and most
important part of the whole project. The aim here is to prepare health and efficient
superstructure that will serve the existing and future needs of the market with its
flexible layout.

CHAPTER 2

CASE STUDY WITH RESPECT TO DIFFERENT TRENDS IN

CONVENTION INDUSTRY

2.1 Introduction

Definition of Components of Convention and Convention Hotel

Convention

Convention is the name given to a general or formal meeting of a legislative

body, social or economical group in order to provide information on a particular
economic situation and in order to deliberate and consequently, establish consent on
policies among the participants. Usually of limited duration with set objectives but
no determined frequency.3
Conventions are usually general sessions, mostly information giving, often
formed around a particular theme or subject matter of topic interest and increasingly
accompanied by exhibits.

In addition to need for large halls and auditoriums

required for the plenary sessions, most conventions break down into smaller groups
to deliberate on particular matters of issue.

Incentive Travel
Incentive travel is a global management tool that uses an exceptional travel
experience to motivate and recognize participants for increased level of performance
in support of organizational goals. The aim of such activities is to motivate and
3

Lawson F.,Congress, Convention and Exhibition Facilites: Planning Design and Management
(Architectural Press: London), p.9

reward high performing employees and sales representatives. An environment for

team building is provided for sharing of ideas and experiences. By this way the
loyalty of participants to company is strengthened.
The activities often include a highly organized programme, visits, elaborate
presentation ceremonies, opportunities to meet top management and short
conferences, including announcements of the companys plans, programs and future
targets.4

Exhibition and Trade Fairs

In its broadest sense, an exhibition is a display, show or demonstration of
something of beauty, value or particular interest to a targeted audience.
The scope of a commercial exhibit is made-up of trade shows and fairs which
bring sellers and buyers of products, goods and services together in particular
industrial sectors. The consumer shows are open to the general public. On the other
hand, the private exhibitions and product launches are specific to individual
companies or to a selected or invited audience.
The main advantage of trade and commercial exhibitions are that they provide a
forum for sales leads, contact withinfluencers like press dealers and distributors.

The main drawing factor which generates a continuing demand for meetings
is the need for the communication at a personalized level. The importance of a
convention or a meeting lies not only in what is said from the platform but in the
total atmosphere of the event and the stimulation provided as a result.5
In global management terms, the information needs to be shared for many
reasons- education, training, team building, strategic planning, problem solving, sale
promotion, new product introduction and reorganisation and these goals are most
effectively achieved by group participation.

4
5

Obcid, Lawson F.,p.6

Ibid,p 4

The Downtown Convention Hotel

Convention Hotels are facilities serving the meeting industry with
extensive ballrooms and banquet facilities that are specifically designed for this
purpose. The downtown convention hotel is the specialized typology within this
range that allows the maximum profit through one on one experimentation of the
city.
Unlike convention centres, the downtown convention hotels are better
integrated with the core locations of the city and play an important role for maximum
use of the attraction points within the city atmosphere. The shopping malls, cafes
and business districts that are in walking distance to the hotel are the most
advantageous properties of an urban business hotel when compared to a convention
centre. The resort facilities that play a challenging role in spring and summer periods,
the downtown convention hotel is seen as the most affordable type to assure
sustainable tourism income. It is season free and continuous.

2.2 Evolution of Convention Hotel in America

The American convention industry differs from the rest of the world in terms
of number of conventions and attendee number. Unlike other convention
destinations, United States of America hosts for large number of international
conventions with attendee capacity of 250-500 people meeting range.6
The United States company profiles are known with the importance given to
corporate structure strengthened organizational meetings. Both in terms of
coordination of international marketing, sales and management issues convention
hotels are mostly desired when compared with convention centres in United States of
America. Since the accommodation duration is between 3 to 4 days, the delegates
prefer a city centre hotel located in downtown location.
The best known examples of convention hotels in U.S. are known to be
atrium structures of John Portman. These 600 room high-rise constructions were
integrated with the city by spacious atrium spaces. The plaza in front of the hotel was
continued inside by a second interior plaza which is the lobby. Early examples of
6

The Statistics of the International Meetings Market in 1995 2004, July 2003 (Amsterdam: ICCA
Data Group) pp, 9-23

10

these structures were seen under the development of Hyatt Regency Hotel. The Hyatt
Regency Rosemont and Hyatt Texas are the first and small scale examples of these
typologies. Later as the project scale increased, the atrium space became the driving
theme in the convention hotels of John Portman.
When considered in terms of functional means, the atrium lobby holds the
possibility for the differentiation and separation of function rooms by placing public
buffer zones in between. All the functions sharing the same pre-function space not
only creates economy but also adds vivacity to the environment.
Although claimed to be 20 percent more inefficient due to loss of space, the
atrium hotel can attract 8 percent more delegates than other hotels.

In Hyatt

Regency Ohare, the atrium differs functions by locating meeting, ballrooms and
restaurants at different bays. The rectangular bays come together to form an
independent convention centre that functions within itself where as the hotel rooms
are located at the towers at four corners where the guest room floors are connected
by pedestrian bridges. Each delegate becomes the part of the stage where they see
and be seen. (Fig 2.1)
The site of the hotel is located at cross roads of main roads. The lot is
surrounded by car parks at 3 sides allowing access for the separate functions at
different bays.
Portmans convention hotels are milestones in hotel history especially with
their contribution given both to interior and urban spaces. Marriott Marquis Atlanta
Convention Hotel is a mile stone when its connection with the urban fabric is
considered. The site of Marriott Atlanta is in the downtown district surrounded by
important business districts, shopping malls and Atlanta Convention Centre. The
hotels integration with the site is defined by a second pedestrian level on the first
floor. The 53 storey gigantic atrium lobby is connected to nearby facilities by 3
pedestrian bridges. Marriott Atlanta defines two pedestrian path ways one defined at
street level and second at first floor level with bridges connected to nearby office and
retail facilities.(Fig 2.2)

Alp Vefik A., Bir Mekan Anlay, Bir Otel Zinciri, Mimar, 1979-3, Issue : 160 (Mimarlar Odas:
Ankara),p 96

11

Fig 2.1 Hyatt Regency OHare Hotel. Convention functions located around a cross axis
separated by an atrium pre-function lobby.8

Dou Orhan, Oteller (Birsen Yaynevi: stanbul)p. 122

12

The site of the hotel is located at cross roads of main roads. The lot is
surrounded by car parks at 3 sides allowing access for the separate functions at
different bays.
Portmans convention hotels are milestones in hotel history especially with
their contribution given both to interior and urban spaces. Marriott Marquis Atlanta
Convention Hotel is a mile stone when its connection with the urban fabric is
considered. The site of Marriott Atlanta is in the downtown district surrounded by
important business districts, shopping malls and Atlanta Convention Centre. The
hotels integration with the site is defined by a second pedestrian level on the first
floor. The 53 storey gigantic atrium lobby is connected to nearby facilities by 3
pedestrian bridges. Marriott Atlanta defines two pedestrian path ways one defined at
street level and second at first floor level with bridges connected to nearby office and
retail facilities.(Fig 2.2)
In downtown Boston, one of the largest convention cities of U.S., the
marketing needs urge different hotels to make collaborations to work together. The
Boston Convention Centre assures the group accommodations of delegates by the
help of this collaboration which helps attracts events.
Atrium convention hotels that are constructed in small downtown sites,
locate atrium in between function rooms to create buffer zones. This is a favoured
flexibility which allows for both ease of access of delegates and separation of event
spaces. The basic space matrix in convention centres are arranged with respect to
unparallel events. Each space is designed to serve for a single event while the
delegates have the feeling that the space is occupied only for their use, where as the
restrictions of convention hotel requires a multi-use layout and solutions to keep
events apart.
The New York Marriott Marquis Hotel reflects the impact of convention
hotels on a site that require revitalisation. The hotel is situated on a restricted theatre
district. Portman states that the 2002 room hotel played a significant role in the
revitalisation of the theatre district. This hotel shows the changing face of hotel
where the iconography of the convention centre starts to display the commercial face
of the 21st Century in its faade. Although the building is closed to the exterior, the
street plaza continues in the atrium with trees, plants, retail shops and restaurants.
When the floor layout of hotel is analyzed, the localization of convention
halls and theatre on top of each other not only helps structural ease but creates a
13

frontal buffer before the visitors enter the hotel. The atrium elevates the guest rooms
on two sides, as two towers are connected together by bridges and elevator halls.
Considering the site, The New York Marriott is in close proximity central business
districts, offices, trade fairs, shopping malls and city landmarks.
The New York and Atlanta Marriott hotels can be seen as the reflectors of the
convention market if the function layouts are analyzed. Specific to America where
both convention and corporate meetings and exhibit meetings are high, the meeting
and convention function rooms are preferred to be located at the same floor for use of
same pre-function space and to decrease the circulation. The basic problem in
convention hotels is the achievement of maximum flexibility in space configuration.
By this way, optimum efficiency is achieved. The spaces are converted by the
changing needs of the event organizer. (Fig 2.3)
Hyatt Regency Dallas at Reunion is constructed in a linear plan formation.
The guest floors follow the podium with a double loaded plan. The linear plan is the
mostly favoured plan type by convention centres since it allows for a continuous
concourse. The subsidiary spaces of ballrooms in this layout are designed to serve
each modular unit by itself even when the rooms are divided into two or more subspaces. The Hyatt Dallas houses two column free ball rooms at first floor and the
exhibition hall and the meeting rooms at the basement floor. The meeting rooms can
be used as a continuous exhibit hall when unified with the foyer and the main exhibit
hall. The front desk and the atrium spaces are designed to be added to exhibit areas.
The corporate meeting rooms are located at second floor. All the function rooms are
gathered around a central concourse that allows the visual contact and navigation of
delegates. The linear plan layout increases the faced of the exhibit hall allowing for 3
different docks for the loading trucks. The loading docks placed at two ends of the
halls decreases the changing time of the event which is favoured both by the hotel
management and the event organizers, for it is the frequency of the exhibits that
makes money. The decrease in the exchange duration means more events that are to
be held in halls. The Hyatt Dallas yet lacks in two main points. In convention
activities direct food courts and table restaurants are necessary in exhibit levels. This
problem is solved by allowing a brand coffee shop or restaurant under hotel structure
near exhibit halls. The V.I.P. entrances to ballrooms and banquet halls are another
lacking factor. The noise problem of central concourse is solved by location of
organizers executive suites in front of ballrooms and banquet facilities.
14

Fig 2.2 Marriott Marquis Atlanta. The 53 storey atrium hotel by John Portman.9

Womersley, Steve. ed., Portman John. The Master Architect Series VI, John Portman & Associates
Selected and Current Works.( Images Publishing, Australia), pp,

15

Fig 2.3 Hyatt Regency Dallas at Reunion.10

10

http://dallasregency.hyatt.com/property/meetingsevents/meetings/floor_plan.jhtml?fpnav=1 The
floor plans are from archive of Hyatt Regency Hotels, source being official web site of Hyatt
Corporation (21.06.2003).

16

The Hotel is constructed on a landscaped site where the landscape is

integrated with the recreation facilities at the basement floor. The spa and the pool
also makes use of a second roof garden that is located over the ballroom. Hyatt
Osaka intends to keep the guests in a isolated yet self sufficient convention facility.
Hyatt Regency Dallas, Front Worth displays a better circulation schema with
a linear flow diagram where the function rooms are located at two sides. Although
this plan formation lacks flexibility, different alternatives of usage are considered
under a strict plan formation. The solution is rather compact when compared to other
hotel layouts. Different use groups are clusters arranged in prior without giving any
need for further flexibility. Each meeting group is accompanied by an exhibit hall.
The groups are arranged to serve as a single space and has an independent entrance
and exit. This way each event has its own entrance and exit.
The double loaded linear room configuration increases the efficiency of guest
room floors yet restricting the plan flexibility allowing merely to circulation area at
the convention level.
The basic handicap in convention hotels is the separation of vehicle and pedestrian
traffics while allowing for efficient use of the circulation scheme. This becomes
rather difficult when the restricted site specifications of downtown convention hotel
is considered. The periphery of the exhibit floor must be maximized in this case to
allow entries for load in and load out docks.(Fig 2.4)
Being one of the pioneers of convention hotels, 2000 room Chicago Hyatt is
constructed over a two piece podium. This division of the podium not only allows for
a central circulation diagram but also separates certain functions specific to hotel and
convention hall. This separated plan formation expresses out the transparent,
commercial impression of the centre while hotel tower remains to be residential and
private. The banquet and exhibition blocks are designed in a transparent manner
carrying the exterior to interior with visual and physical flow maintained by the
transparency at all facades.
Hyatt Chicago places main convention facilities at the basement floor. The
exhibit floor and ballrooms are located at first and second basement floors within two
different blocks. The entrances to these levels are maintained at different levels for

17

each, giving 9 loading docks for exhibit and separate service access for each block
Separation of blocks assure transparent low-rise, glass convention concourse lobby at
ground floor which allows the visual transition from street level to high rise city
blocks moreover it helps with the graded transition from public to private space. The
fully glazed, luminous exhibit block has the iconography of the Crystal Palace of
Paris which was the first large scale exhibit hall in modern era. The image of the
convention halls today are yet taking the iconographic shape of the commercial,
retail image behind the exhibit look. The business hotels on the other hand are
becoming more work and office oriented at skin although they prefer to be cosy and
residential at interior.(Fig 2.5)
Hyatt Regency is an important model among convention hotels with its
emphasis given to the use of levels on site and the fragmented structure that gives the
ease of control between hotel and convention users. The lobbies of the convention
hotel are also at different floors.
Hyatt McCormick Place Convention Campus and Hotel Complex in Chicago
defines the growing nature of convention market. Although designed as a permanent
exhibit hall and fair hall in 1948, due to increasing convention space needs the south
convention hall was erected in 1971. Within time a new hall is added to the structure
in every ten years. Today the McCormick Campus holds 112 meeting rooms 19800
m2 of exhibit space and a hotel of 800 rooms.
The open ended plan formation of McCormick Place gives clues about the
future expectations of a convention site where the structure needs to be ready for
future growth. The phased construction is one of the inevitable features of a
convention hotel. Within the life cycle of the building as the capacity of the hotel and
the complex increases, growth and flexibility will be the basic networks that will
structure a convention complex. In this manner to sort out the circulation structure
and the layout matrix of the building would help to define an open ended design
structure that is controlled by a central backbone.
The convention centre is constructed around a main concourse located at the
centre of the complex. Each building is designed to host different events of different
sizes. The main market profile of the campus is mid and small scale convention
events. The buildings are designed to hold exhibits, convention facilities, small scale
conventions and meetings. The accommodation needs are supplied by the 800 room
convention hotel. The main circulation axis coordinates and links different blocks
18

Fig 2.4 Hyatt Regency Dallas at Forth Worth. The preset floor layout where all
venues are accommodated with an exhibit hall of its own.11
obstructed. By increasing the venue number the move in and move out frequency of
convention events are assured which is more profitable when compared to one single
large scale event San Diego Convention Hotel is a 1625 room large scale convention
hotel. The site is located at the cross roads of the main shore lane and Kether
Boulevard. By this way 3 entrances are maintained to the complex with a 4 lane bus
stop port cochere at the convention hall entrance. The car park need is supplied with
by the help of closed car parks near the district and an open car park on the site. The
hotel is situated at a downtown site near the San Diego Bay. The hotel towers are
placed at the two corners podium base having separated reception and lobbies. The
function room layout is made of 3 ballrooms where the ground floor ballroom is used
as an exhibit hall with its own entrance at the Marina faced. At the second floor the
ballrooms and the meeting rooms are set back from the sea side to allow view of the
harbour in linear pre-function area. The mass of the hotel is designed in a cascaded
way where the level differences allow for the location of tennis courts, swimming
pools maximizing the terrace area. The levelled arrangement of the functions bring
together different functions without visual connections. The pool and the ballroom
can be located on the same block. (Fig 2.6)
11

http://dfwairport.hyatt.com/property/meetingsevents/meetings/rooms.jhtml The floor plans are from

archive of Hyatt Regency Hotels, source being official web site of Hyatt Corporation (21.06.2003).

19

Fig 2.5 Hyatt Regency Chicago on the Riverwalk12

12

http://chicagoregency.hyatt.com/property/meetingsevents/meetings The floor plans are from

archive of Hyatt Regency Hotels, source being official web site of Hyatt Corporation (19.06.2003).

20

Fig 2.6 San Diego Convention Hotel designed by Skidmore Owings and Merrill
Architects.13
13

Francone Marcello, ed., S.O.M.: Selected Works, Master Architects Series (Peleus Press:

Australia),pp, 332-335

21

2.2 Convention Trends in Europe

Europe has a different convention structure when compared to America. The
conventions held in Europe are not as frequent as in the U.S.A. but the meetings are
rather large. The frequent meetings are generally mid-scale where meeting rooms are
on high demand. When European market trend is observed, the meeting planners
prefer to hold the events in convention centres rather than hotels. The convention
hotels hold the second largest event space after convention centres. The halls are
generally referred as public event spaces in out of season periods. In order to
understand the nature of convention space in Europe, it is much more appropriate to
analyze the space matrix of major convention centres in Europe. which will be done
in the following chapter.
The function rooms of European Convention Hotels basically consist of
meeting rooms. The rooms are preferred to be still flexible but designed for rather
mid-scale events (50-250) participants and a large share of big scale convention
facilities are held in convention centres. The hotels are generally in close proximity
with the convention centres and share venues of convention centres. Differing from
American layout matrix the convention centres of hotels are of Europe hold
auditoriums within their structure.
In Hotel Intercontinental Berlin the ground floor plan is totally dedicated for
convention. The meeting rooms are completely separated from the banquet room.
The exhibit facilities are held in exposition centres so the convention hotels do not
hold exhibit spaces. Europe attracts the market with its historic landscapes. The
architecture of convention hotels are generally restored palaces. Being in the cultural
centre of European politics, convention hotels house political assemblies, scientific
conventions and conferences.
Hotel Rey Huancarlos one of Barcelonas most prestigious hotels, defines the
meeting program in European market where the atrium floor plan consists of an open
plan formation. This hotel is in close proximity with the Barcelona convention
Centre located in a green landscape in downtown Barcelona.(Fig 2.7)
Free standing cubicles of meeting spaces are placed at the centre. The
meeting rooms are made up of 150-200 m2 of divisible spaces. The brand and unique

22

design is rather outstanding in Europe where each hotel identifies its quality
understanding within a unique manner. The aim is to give the most sophisticated
environment in an intimate, original and sophisticated environment.
The atrium lobby of five star Barcelona hotel is designed with a free plan
layout. All meeting and convention rooms are solved within the ground floor yet the
banquet hall is separated from the main lobby by a series of meeting rooms. Within
lobby the reception and the back of house areas are separated from function rooms
on a wedge shaped plan. The corporate meeting sector shapes the floor matrix in
convention hotel. Unlike convention centres , the meeting rooms are preferred to be
separated from the banquet halls. The meeting rooms are generally referred as the
syndicate rooms in United Kingdom. They are either used by political parties for
meeting or by families for receptions.

2.3 Convention Trends in Asia

Japan holds the growing market of convention. According to ICCA 19952004 research Asian countries hold the same space requirements with America.
Around 57 percent or corporate meetings are designed by meeting planners in Asia
who prefer their convention destinations to be their neighbour countries. The
convention, exhibit and meeting venues of Asia and United States show the same
characteristics where the meeting is rather improved. Hong Kong, Singapore and
Taiwan are named as the growing travel destinations in the 21st century. To
overcome high demand of events brand names choose to build two or three hotels of
different brands together. The convention hotel becomes a mixed use facility where a
shopping mall, convention venues and accommodation needs are brought together
under one roof. Walter Rutes defines such complexes as the Ultra-tel. The ultra-tel is
the high-rise tower plan hotel that works within itself and requires high investments.
Such buildings generally become a landmark as it represents the modern face of the
construction industry and the capital of the country. The Raffles City and the Marina
Mandarin Bay Complex in Singapore Malaysia are two examples of such complexes

23

Fig 2.7 Hotel Rey Huan Carlos Convention Hotel, Barcelona is situated in the
convention campus adjacent to Barcelona Convention Centre, Spain14

14

Obcid, Rutes W., p 256

24

Although infrastructure needs are high convention hotels started to diffuse

into the city fabric by producing symbiotic relations with nearby facilities. In the
U.S.A. due to high urban land costs many hotels started to collaborate with small
scale convention halls where the functions of hotel facilities were linked to
convention centres, shopping malls and entertainment halls. In Asian downtown
centres, convention hotels of different brands share a common podium in order to
make maximum use of site. Thus; the car park, entrance hall problems are solved
with optimization. Maximum number of facilities are brought together assuring the
variety of functions in a mixed-use development. Atrium solutions in this case not
only enhances the space but also separates the attendees of different function groups.
In this manner, the Raffles City Complex in Singapore is comprised of a high-rise
office block and two hotel towers of two distinct brands coming together over the
same base. Within this complex, although they have their own meeting and banquet
halls, the gathered venues of the convention halls act as marketing advantages. The
capacity of a city to attract large convention activities are measured with respect to
number of four star hotels in the city and their proximity to large scale meeting
venues. Hotels of different income groups brought together keeps a high percentage
of the attendees within the complex increasing the profit.(Fig 2.)
Hyatt Regency Osaka defines the convention hotel as a self sufficient
construction. The building is designed in an eclectic manner with hotel tower,
convention building and the car park each being housed in a different building block.
The convention block and the car park are built side by side allowing load in access
at both two floors of banquet and exhibit halls. Increasing the use range of function
rooms, the column free ballroom and banquet rooms can be used as exhibit halls as
well. The load in and out services are supplied by the garage block adjacent to the
hall.15
The basic handicap of Hyatt Osaka is that the meting rooms and banquet halls
are physically separated. The meeting rooms are gathered under the hotel tower
which is isolated from the convention hall. The meeting room floors also continue on
upper floors of square form hotel block. The hotel blocks are solved in blocks where
each block hold only a single function. These different functions are connected

15

Hotel Facilities: New Concepts in Architecture and Design (Meisei Publications: Tokyo),pp70-75

25

together at basement floor where a network of recreational functions tie different

groups of spaces. The hotel is constructed as a self sufficient complex where the site
organization with the restaurants, shopping mall is designed to overcome the needs
of the delegates in an amusement floor. The convention hotel also holds a spa and
pool at roof floor. (Fig 2.10)

Fig 2.8 The Ultra-tel Hotel complex in Singapore Malaysia. The Hotels are part of a
master plan designed to reflect the modern and technological face of Malaysia.
Raffles City is referred as 4-5-12 and Marina Mandarin complex is referred as 3-6-7
in axonometric view.16

16

For Floor Plans: Rutes W., Penner R., Adams L; Hotel Design Planning and Development
(Architectural Press: London),p 127

26

Fig 2.9 The Raffles City Convention Hotel Complex by Pei, Cobb, Freed and
Partners. The Complex Maximizes the function room space by minimizing
circulation area of 2 hotel towers and office buildings under one podium.17

17

http://www.pcfandp.com/a/p/7314/s.html. Images are taken from official web site of Pei Cobb
Freed and Partners web page., 29/03/2004
For Floor Plans: Rutes W., Penner R., Adams L; Hotel Design Planning and Development
(Architectural Press: London),p 127

27

Fig 2.10 Hyatt Regency Osaka.18

18

Hotel Facilities: New Concepts in Architecture and Design (Meisei Publications: Tokyo),pp70-75

28

2.4 Convention Market Trends in Turkey

The convention market in Turkey shows two different properties in terms of
meeting. Within the international platform, the number of conventions held in
Turkey is increasing each year where the international conventions are usually high
in density requiring ballrooms of minimum 500 people. The local requirements of
Turkey is generally exhibition oriented. Exhibition halls require meeting rooms as
well.
The number of convention hotels in Turkey is limited. The requirements of
meetings, conventions and exhibits are hardly met by the hotels. The convention
tourism finds itself location in southern shores where incentive travel is unified with
the recreational tourism. The basic handicap of recreational tourism is that it is
limited with the spring and summer season, whereas the advantage of downtown
tourism is that it lasts whole year. This property of convention tourism is first utilised
by stanbul. The tourism strategy needed investment which meant that the hotels and
meeting facilities had to be built in order to attract delegates.19
The first hotel in this respect was the Hilton Convention Hotel which today
has expanded its venues by an addition of 1300 m2. The hotel is in close proximity
to Cemal Reit Rey and Ltfi Krdar Convention Centre which is the first downtown
Convention Centre built in Turkey. This hotel is the first example of a modern hotel
facility that will allow all the comfort that the costumer may expect from his home
environment. The hotel is simply designed in a self sufficient manner where the
customers needs may be met without leaving the building. The rooms are designed
flexible enough to accommodate different requirements. The layout may be changed
to fit a bedroom or a hotel office if necessary. Most important of all stanbul Hilton
Hotel is designed to be the first convention hotel in Turkey. It houses a 600 people
banquet hall with a 250 people dining hall which can be divide in to smaller parts if
necessary (Fig 2.11a).20
The investments in the hotel industry is growing each day. The Hattat
Tourism and Construction Company started the construction of a 50 floor convention
hotel in stanbul. The hotel will house a convention centre, botanical gardens and an
19

Tavit Kletavitolu, Trkiye Turizm Yatrmclar Dernegi Baskan, Siyaset Meydan, Atv
(stanbul: Atv Studios) , 21.05.2003, 23.30
20
Arkitekt, Turistik Otel, No.3-4, Yl.1952, pp.56-63

29

aquarium, cinemas and concert halls. The world trade centre for stanbul will be
located in this building and the tower will stand as a landmark being the highest
building in stanbul. The function scheme of Diamond Of stanbul states that the
location of recreational elements within the convention centre is the basic notion to
integrate the hotel within the city. The city will be drown to the hotel increasing the
user groups of the hotel. It will work as a city within itself. The form of the hotel will
represent a diamond referring to the worlds fourth biggest diamond kept in Topkapi
Palace (Fig 2.11b).21
The Conrad Hotel houses 592 guest rooms and is located on the Bosphorus.
The site is located near Yldz Palace and Park of Bosphorus. Hotel houses two
ballrooms of 900 m2 and 450 m2. The banquet and hotel structures are separated due
to structural reasons and the meeting rooms are located under the curvilinear hotel
block. The block also surrounds the banquet and ballroom spaces. The hotel has 30
function rooms of which the meeting rooms are 30 to 80 m2 and can be joined if
necessary (Fig 2.12a).
Conrad Hotel makes maximum use of the view of Bosphorus. The cascading
block formation maximizes the number of terraces while the periphery of the hotel
increases to increase the number of rooms with hotel view.
The Swiss Hotel Bosphorus is the Third ring of the convention hotels located
in downtown Taksim stanbul. It is important that with respect to its massive block
formation the elevation is lowered by the levelled facade organisation and the
breakdown of blocks. The hotel blocks make maximum use of level differences in
the favour of location of loading docks and function entrances. The hotel blocks are
kept low and divided at two sides to allow space for the spacious lobby and the
banquet halls at the centre and sides. As a master plan decision, the historical city
axis that exists between the Dolmabahce Palace and the nn Square is
emphasized. The hotel makes maximum use of the historical sites of stanbul by its
vistas and restaurants viewing landscaped sites. The function rooms of Swiss Hotel
Bosphorus constitute of two ballrooms one being 1100 m2 and the other 765 m2.
There are 23 function rooms within the hotel. A spa and wellness centre are also
located in the hotel accompanied by inside and outside pools (fig 2.12b).
21

Benmayor Gila,, Hattat: Benim kuleler elik prlanta olacak, Hurriyet Economy, Hrriyet,
24.02.2004, p. 14. For detailed information refer to;
http://www.arkitera.com/haberler/2001/12/10/dubai.htm, Maslak'a Dubai modeli ikiz kule,
10.12.2004

30

Fig 2.11a Hilton Convention Hotel stanbul.22

Fig 2.11b The Diamond of stanbul Hotel.constituted of botanical gardens,

aquarium, shopping centre and convention facilities.23
22

Kumral Blent, Yapdan Semeler 2, Turizm Yaplar (Yap Publications: Istanbul), pp, 24-30
Benmayor Gila,, Hattat: Benim kuleler elik prlanta olacak, Hurriyet Economy, Hrriyet,
24.02.2004, p. 14. For detailed information refer to;
http://www.arkitera.com/haberler/2001/12/10/dubai.htm, Maslak'a Dubai modeli ikiz kule,
10.12.2003
23

31

Fig 2.12a Conrad Hotel stanbul makes maximum use of the site and view by its plan
formation enclosing the elliptical ballroom.24

Fig 2.12b Swiss Hotel Bosphorus25

24

http://conradhotels.hilton.com/en/ch/hotels/index.jhtml;jsessionid=GEMU1PFK0MRN2CSGBIWM
VCQKIYFC5UUC?ctyhocn=ISTHCCI, 12.10.2003. The images and floor plans are official courtesy
of Hilton Tourism Inc.

32

The three hotels in European section are oriented with respect to Ltfi Krdar
Convention Centre, while holding maximum use of the view. Close proximity to the
convention centre is defined as an extra facility by all hotels.
The analysis of convention hotels in stanbul shows that a minimum of 600
rooms are required as a must for small scale convention hotels. This is a factor driven
from the occupancy of the banquet halls. The convention hotels within convention
market of Turkey need to have a minimum of two banquet halls and accompanying
meeting rooms. The ballrooms need to be minimum of 1200 people capacity and
available to be used as an exhibition hall as well. The second ball room may be
smaller in dimension. The necessary meeting rooms have to be designed in close
proximity to the meeting and exhibit spaces. The requirements for meeting rooms are
minimum of 40 m2 (50 people in theatre layout). Larger groups of meetings, like
groups of 80 people, are among the meeting range. In this respect the rooms have to
be combined. At least three meeting rooms are used by the same group in one
session, these are either for meeting, luncheons or banquets.
The best example of downtown convention hotel can be named as the
Sheraton Ankara as it fulfils all the needs of a meeting facility. When considered in
city scale, The Sheraton Ankara Hotel stands out with its consideration given to
urban space. The Hotel is built as a mixed use complex, constructed within a dense
central lot. This hotel is the first downtown hotel built after Hilton Hotel-Ankara,
which is aimed to overcome the meeting and convention requirements of the city.
Menhard Von Gerkan from GMP Architects explains the design approach as an
attempt made to define an urban space to attract the attention and to make a
transition between the housing settlement of Gazi Osman Paa and the green, free
landscape of Kuulu Park. For Von Gerkan; the basic handicap of Ankara is that
through design stage very small consideration is given to design of outdoor public
space. This approach not only reduces the life quality of the city but also decreases
the value of the buildings. In this respect, The Sheraton Hotel and Karum Shopping
mall are deliberately recessed from the Tunal Hilmi Street leaving a landscaped
hotel garden in front. By the help of cascading stairs and landscaped lot the
emphasize is given to the facility leaving a breathing space for the city centre. When

25

Obcid, Yapdan Secmeler 2, pp 56,65

33

Fig 2.13 Sheraton Ankara Hotel26

26

Kumral Blent, Turizm yaplar: tatil ve turizm tesisleri, kent otelleri, ulam

tesisleri (YEM :stanbul),pp 21-24

34

considered in terms of distribution of facilities, the Sheraton Hotel uses a fragmented

function scheme where the public and private sections of the hotel are separated in
different building blocks connected by a single lobby. The convention hall with the
pool section located over the meeting rooms are connected to the cylindrical hotel
block by through the same lobby. This approach creates problem in terms of access
to public facilities when the non-hotel customers are considered. Generally, the
ballroom is rented for weddings and private organizations at nights and direct access
to ballroom can not be maintained through a separate entrance (Fig. 2.13).27

2.4 Selected Convention Centres

The convention hotel is a multi-use facility where space needs of a
convention centre is unified with the necessary accommodation needs of a hotel. The
success of a hotel facility is in the ability to fill the local needs of the market. When
the existing convention market is considered basic backdrop of convention hotel is
the restrictions in the flexibility of the venues due to structural needs. Secondly,
although they require collaborations in time, the basic challenge of convention hotels
are the convention centres.
In order to compare and adopt the space matrix of a convention centre into a
convention hotel, top convention centres in mostly favoured cities are analyzed. The
choice of location, means of flexibility, structural considerations, functional schemas
are analyzed and compared with the convention hotels and their changing space
needs with respect to changing local and international market are analyzed. The
inventory of different trends and lacking aspects of convention hotels compared to
convention centres will be analyzed in terms of flexibility which is the basic driving
force in this sector.
The Vancouver convention centre is designed at the Pacific shore of Canada.
The centre is designed in the form of a ship welcoming the harbour visitors. The roof
structure is constructed from sail formed tensile structures that express the
iconography. The hotel and the convention centre form a unified complex that
emphasise the importance of the harbour in the economy of the city (Fig 2.14).

27

enyapl Burcu, Sheraton Ankara Oteli, Karum, Arkitekt,1991, no. 8, pp,30-43

35

The complex is situated on an infill island projecting from the mainland. The
island hosts a convention hotel where the entrances are maintained either directly via
the mainland or by the decks that surround the centre at three sides. The lobby of the
hotel is elevated from centre by a podium and the access is maintained by escalators
that rise two floors from the podium. The basic distinction of Vancouver Convention
Centre from its resembles is its compact solution and ease of navigation. The
circulation routes are clear and allows for variations in pre-function spaces. The
exhibit hall at the far end of the centre can be divided into three halls where each hall
can make use of truck access, pre-function space and the magnificent view of the
harbour.
The concept of the Vancouver Convention Centre is treated like a culture centre
rather than a convention centre. The front deck of the centre houses IMAX Cinema
Hall which means that the structure is used both by cultural and conventional means.
The cinemas are also rented by the managing firm for the use of conference
activities.
The front deck all in all becomes a public terrace as it houses the food courts,
cinema foyer and with its cinema used for the public needs. This plan formation
plays an active role for the continuous use of the centre. The cinema at the far end of
the centre draws the community within the centre and gathers at the end of it. This
time the movement and the traffic at the harbour becomes and the users of the centre
becomes the mutual spectacles. Until now the hotels have been places where the
tourists became residents and enjoyed the city by going out of their accommodations,
but the Vancouver Centre brings the city and its inhabitants into the hotel. The nondelegate and convention users are separated in circulation by exterior and interior
decks at periphery.
The flexibility of Vancouver convention centre is that the exhibit hall is
constructed over a landfill that allows the free use of the site that is open on three
sides. A multifunction facility; cinema is allowed within the centre that can serve
both for the public and the delegation needs. The centre makes maximum use of the
site and the view of it. The public flow is continuously attracted from downtown to
the dock restaurants. This is known to be the directed flow in convention centre
design. Apart from conventional design rule, the difference here is the attraction of
the community rather than the delegate itself. The user group of the building is

36

versatile as it includes the tourists, the meeting attendees, the community and the
users of the harbour. This assures the vivacity of the centre.
The Sun-tec convention is designed as part of a master plan that holds,
office, retail and entertainment halls. The floor plan layout becomes free from the
necessity to locate exhibit floor at ground floor or basement. Each floor has a loading
dock that is connected to the ramp nearby. The exhibit halls are located on the fourth
and sixth floors with the loading docks that allow for direct access for vehicles and
trucks. The ground floor is directed into two function zones where a retail mall and a
concourse take place. The retail space gives the opportunity to be used as an exhibit
hall for future use. The structural framework constitutes of two systems one being a
major and other being a minor system. The minor frame system is rather dense and
continues up to the exhibit floors where the major system continues at upper floors
and carries the roof space frame system. By this way the simple rectangular plan
formation is left free by the service cores that are solved at four corners.
The convention hall and the meeting room are solved at first floor which is
favourable for such kind of venues. The two functions are linked together by a bridge
that assures controlled passage(Fig 2.15).
Ltfi Krdar Convention Centre in stanbul is important to define the exhibit
need and necessary space configuration that is used for local and international space
configurations that are valid in Turkey. The Lutfi Krdar Convention Centre is made
up of two building blocks that are constructed on a sloped site. The downtown
convention centre is in walking distance to The Cemal Reit Rey Concert Hall,
Atatrk Culture Centre. and four convention hotels. The Taksim and Maka Region
is designed as a Convention Valley within the large scale. So, the location of a
convention hotel has to be designed with respect to side facilities of the site for the
sustainability of the project. Although these hotels are not designed around a master
plan, the over all outcome becomes a success for the handling of international
conventions.
The two blocks of Lutfi Krdar Convention Centre are designed to make
maximum use of the site. The exhibit hall is designed to be combined with foyer
space at three sides maximizing the used space. The second building holds the
auditorium and the meeting rooms for large events. The meeting rooms are located at
the front and back sections of the auditorium above foyer. The auditorium is also
used for conference activities (Fig 2.16).
37

Fig 2.14 Vancouver Convention Centre.28

Fig 2.15 Sun-tec Convention Centre.29

28

The images and floor plans are taken from the official web page of Vancouver Convention &
Exhibition Centre. http://www.vanconex.com/home.html, 07.07.2003

38

The vehicle access is viable both at ground and first basement floors. The
basement floor access at auditorium block gives direct access to local restaurants
which have direct view of the Bosphorus due to the sloped site of the facility. The
main kitchen is located right behind the restaurants at ground floor taking service
from the garage level. Banquet service at different function rooms, to foyer and to
exhibit hall is maintained by the main kitchen.
Lutfi Krdar Convention Centre can be analyzed in two terms. Being a mid
scale convention centre located in downtown, its relation with other hotel and
convention facilities gives us clues on the design criteria for site location of a
meeting activity. Secondly, its harmonious silhouette and utilization of the level
differences contributes to the flexibility of the site. The flexibility added to the
facility becomes site specific.

Fig 2.16 Ltfi Krdar Convention Centre, stanbul.30

29

Lawson Fred ,Congress,Convention and Exhibition Facilities: Planning, Design and

Refurbishment (Architectural Press Publications: London), pp: 3-4

30

For more information refer to offical web page of Lutfi Krdar Convention Centre. All images

and floor plans are offical cortesy of L.F.C.C. , http://www.icec.org/inhousetech.htm,

27.05.2004

39

CHAPTER 3

IMPACT OF CONVENTION ACTIVITY IN URBAN SCALE.

3.1 The Economical Impact

Town centres still possess economical strengths such as accessibility and an
ability to draw upon a large pool of labour. Equally, large centres are becoming
major nodes for exchange of electronic information and knowledge and are likely to
be situated on information superhighways such as fibre optic routes because of the
number of local businesses and the frequent presence of higher educational
institutions.
Growth in tourism, especially business and conference packages, and a
growing interest in urban heritage have also opened up new opportunities for many
town centres.31 As a result, many town centres have witnessed a growth in tourism
information bureaus, interpretative facilities, visitor accommodation and leisure and
niche retailing attractions. Town centres continue to be the focus of arts and cultural
activity.

3.2 The Social Impact

Despite commercial pressures, town and city centres have the potential to
perform a vital social and psychological role. They remain the focus of public events,
festivals, street markets and meetings and contain the most important civic spaces
and buildings as points of arrival and departure, reunion and farewell, they evoke
powerful memories. Despite the privatization of public space, town centres remain
the most important public domain for sharing communal and cosmopolitan values.

31

Ibid,p. 11

40

They are places for promenading fashion, meeting, sharing personal

experiences and broadening horizons with a central role in promoting social
cohesion.32

3.3 The Cultural Impact

Town and city centres are sustained by past commitments. Many retail,
commercial, property owners and other interests have invested considerable capital
in urban centres and can not withdraw this capital immediately for legal and financial
reasons. Thus, to use existing urban assets in which society has already heavily
invested makes more sense than creating new infrastructure on green field sites.33

The Diversity of Modern Town and City Centres

Each town centre has different strengths, legacies, challenges and difficulties.
What are the strengths and difficulties for the town centre of Ankara? What use can
we make of a convention centre to help overcome those difficulties?
The relative prosperity and social well-being of the citizens are determined by
a combination of size, the flow of the local and sub regional economy, spending
power and behaviour of catchment population, degree of competition from
neighbouring centres, quality of attractions, amenities and built environment, relative
accessibility, levels of public safety, property ownership, land development control
and land allocation policies, land availability and the condition and degree of publicprivate co-operation, commitment and entrepreneurialism.
As Richard Evens states referring to The Urban and Economic Development
Group et. al., town centres are grouped under five groups considering three basic
criteria; location, history and population.
Free Standing Market Town: Between 10 to 75 thousand population with
above average levels of affluence and car ownership, which serve a hinterland that
have developed incrementally.

32
33

Ibid.,p. 12
Ibid,p.13

41

 Industrial Towns: 20 to 200 thousand population which are prone to

decline due to economical restructuring, loss of population and trade to neighbouring
centres.
Sub-Urban Centres: Located within large metropolitan centres with
catchments population ranging from very poor to very wealthy, depending upon the
character of neighbouring residential areas.
Metropolitan Cities: have distinct populations ranging from 0.25 to 1
million and contain a wide range of functions, specialized quarters and important
civic, cultural, social and commercial uses.
Resorts and Historic Towns: With population of 20.000 upwards whose
economy is considerably dependent upon their tourism and heritage attractions and
which contain a mixture of affluent, the retired and people on low incomes.34
As a conclusion, town centres are a barometer of what is important to society
as a whole rather than to collection of individuals because they are a crucial part of
the public realm.35 So for Ankara, the centre must be where these entire criterions are
most densely concentrated.

34
35

Ibid, p. 14
Ibid, p.14

42

CHAPTER 4

DESIGN CRITERIA FOR CONVENTION HOTELS

4.1 SITE CHARACTERISTICS

Regional Market Characteristics

Convention hotel is the largest accommodation property among other hotel
types. The smallest convention hotel is to hold at least a guest room capacity of 500
to 800 guest rooms where the larger ones hold between 800 to 3000 rooms. During
design of public spaces the peak occupancy of the hotel is taken as the guide line. In
other words the hotel is assumed to be working with full capacity.
Since the guestroom capacity is high the marketing peak and low points of the
seasons and the local demands of the convention hotel must be carefully considered.
As Walter Rutes states, certain continents have different marketing approaches to
convention activity. In United States and Canada the group business activity is at top
priority. So, hotels in major cities like Orlando and Chicago keep their meeting room
numbers flexible and high in number.36 In addition to large exhibition halls located in
ground floors, hotels utilize large ballrooms that are divided for meetings at second
and third floors. Unlike United States, the European conventions are exhibition and
trade fair oriented. The meeting halls in convention hotels are generally mid-scale
and the exhibition halls of a nearby convention hall is utilised for the necessary
exhibition space. Smaller cities of up to 250.000 people population may have a
convention oriented hotel in 300 to 400 room range small convention hotel with a
ballroom for 800 to 1000 people. Major cities define a convention hotel having a

36

Rutes W., Penner R., Adams L; Hotel Design Planning and Development (Architectural Press:
London),p 127

43

minimum of 500 rooms for regional and small national meeting. This number may
reach up to 1500 or more rooms at major cities.

The Site Plan

Careful consideration has to be given to the number of guestrooms that are to
be hosted in a convention hotel. Large scale convention hotels today require a
minimum of 1000 guestrooms generally; a 200 to 400 additional room is added to
this room not to refuse the usual guests at peak seasons. However, the secondary
cities in convention require a room capacity around 500 rooms. This capacity is the
generally preferred capacity that serves for regional conventions and local fairs.
While deciding on the room capacity, the growth of the market must be
carefully considered. As an immensely growing market the convention sector
requires more and more space each year. The Sheraton Ankara Hotel constructed in
1991 with a 311, room capacity, is going under an expansion with an apart-hotel and
convention hall today. In this respect the future expansion sites of the hotel must be
carefully considered and planned in prior to development. The location of the
swimming pool, tennis courts and recreational areas should be located in order not to
avoid future growth.

Municipal Regulations and Minimum Site Area Requirements

In convention hotel design, in order to calculate the total construction area of
the hotel, 85 m2 of space is assumed per each room. Thus, for a 1000 room hotel
around 80.000 m2 of space is required in total. Considering these facts and municipal
regulations the construction site must be carefully evaluated.
Investors of large scale convention hotels prefer to open their convention
hotel headquarters close to city centres. Yet, due to the difficulties in acquiring the
necessary site and future expansion problems; they either move their hotels to suburban sites or use exhibition spaces of local convention centres. According to Walter
Rutes, if developers would have the opportunity, they would build a second
ballroom, extra breakout rooms and a major exhibition hall to their existing hotel in
44

downtown.37 As a rule of thumb, hotels devote 40 percent of its function area to

exhibition space, 40 percent for grand and junior ball rooms and 20 percent to small
meeting rooms.
Marriott San Antonio River Centre is considered to be a successful model for
distribution of meeting rooms and layout of convention hotel in a small site. Located
in a busy location, this hotel features a grand ballroom of 3860 m2 and holds 915
guest rooms of which 86 of them are suites (Fig 4.1).
Due to scale of the project the required public space and back of house space needed
for convention hotels are three times of a small scale downtown hotel. Especially
when the exhibition halls are considered the location of the freight elevators must be
close to loading docks. Through development stages, as a rule of thumb the
minimum required ballroom space for a 1000 guestroom hotel is 36x76 meters which
makes an area of about 3500m2. The minimum required urban site is assumed to be 2
to 2.5 times of the major ballroom. Generally for a meeting activity to function
efficiently the ballrooms and function rooms are situated at ground floor for ease of
access and distribution.
Generally in restricted sites, developers prefer to solve the exhibition floors at
basement to gain an additional two floors at guest floors. Hyatt Regency Washington
D.C., one of the largest convention hotels in Washington, utilises an exhibition hall
at basement floor and ballrooms at top stories. With the main ballroom located at the
centre, an atrium space is created at upper levels of the hotel where the guestrooms
are located at the periphery. The pre-function and meeting rooms are solved under
the guest room floors (Fig 4.2).38
If site constraints allow it is ideal to keep the site area to be 4.5 times of the
major ballroom keeping all the ballrooms, pre-function and especially the meeting
rooms at the same floor. This is generally preferred at sub-urban renewal sites and
airport hotels. The smaller meeting rooms, food and beverage outlets and back of
house areas can be placed on another floor.

37
38

Ibid,p 124
Obcid,Rutes W.p 132.

45

Fig. 4 1 The ballroom and meeting room layout of the Hyatt Regency San Antonio, River
Centre is considered as a successful solution of the function rooms at the same floor.39

39

http://marriott.com/property/meetingsAndEvents. The floor plans are from archive of Marriott

Hotels and Resorts, source being official web site of Marriott International Inc. (12.12.2003).

46

Presidential Suite Plan

Capitol Suite

Entrance Facade
Fig 4.2. Hyatt Regency Washington D.C. This layout is the most preferred plan type in convention
hotels that allow efficient structural solution both for the construction of the exhibition hall and the
ballroom. 40

The Regulations
40

http://washingtonregency.hyatt.com/property/meetingevents. The floor plans are from archive of

Hyatt Regency Hotels, source being official web site of Hyatt Corporation (15.12.2003).

47

The regulations serve the owner from inappropriate development on adjoining

properties in the future and establish a baseline for a quality project. Typical
regulations concerning convention hotel design are as follows,
1. Zoning and land use codes.
2. Building Planning and health standards.
3. Historic prevention laws.
4. Environmental Conservation requirements.
5. Community Interests.
6. Zoning which establishes the overriding parameters of what and how
much can be constructed is based on the desire of the community to control the
type of development and to separate incompatible uses from each other.
7. Fire Codes.
The city is divided into use zones (residential, commercial and industrial)
with specific regulations for each. The several commercial zones define on the map,
for instance will have different requirements for set backs (distance between the
building and property line), height (number of floors), density (number of units),
parking and loading and so forth. These regulations are the basic criteria that have to
be defined at the site analysis stage depending on the location of the lot. In cases
where the lot requirements are necessary, parcels may be combined and air rights
may be purchased to enable larger development than would be permitted on one site
alone.41

The Traffic and Access

The public spaces in convention hotels are especially designed considering
peak points of convention attendance. Likewise, the parking places and arrival of
shuttles and necessary road dimensions are designed with respect to peak mass
arrivals. Thus, at least 4 lanes should be left at porte cochere.
The traffic generated by the hotel must be properly managed. Traffic is a
concern of the hotels neighbours, especially when the hotel is on the edge of the
district. Generally, home owners are concerned by the noise and population of the

41

Ibid, p 248

48

guests cars and delivery trucks. These are strong arguments often used to stop a
hotel project. For this reason, the isolation of the car parks, traffic access and noise
buffers relative to car access routes must be carefully considered. Trees are
considered to be perfect buffers, in terms of absorbing sound and hiding unwanted
view of car parks. Yet, the texture and kind of landscape must be carefully chosen, to
allow background and foreground relation of the hotel and not to completely block
the view of hotel.42
Parking in cities is increasingly restricted to limit traffic congestion,
especially in central business cores.43 Not only the incoming and outgoing vehicle
traffic but also the necessary space for guestroom itself is a problem. For downtown
convention hotels, valet parking using a nearby parking garage is a generally
preferred option. Parking beneath the facility requires a heavy capital investment, 510 times of surface parking for a roadside or suburban hotel. But the garage provides
safety and convenience for guests.
Loading docks are a necessary component of hotels and should be located
well away from public entrance, ideally on a different street where delivery and other
trucks are well separated from guest vehicles. Especially for exhibit halls close
correlation to docks and direct landing of exhibit material close to the hall must be
considered.

Accessibility and Circulation

For convention hotels, separate hotel entrances for main lobby, ballroom and
exhibit hall, restaurants, hotel receiving, employees and exhibit, unloading should be
considered. VIP and celebrity guests, including the heads of state and their entourage
enter a hotel by a back entrance. Therefore, where this may occur they should be well
protected from view and designed for secondary access to the public areas.
Regardless of type of the hotel all lodging facilities need to plan access to
service areas (Loading, trash and employee entrance) for maximum efficiency while
avoiding cross-circulation or inconvenience to guests.
Once the guest has arrived on the site, the major objectives are to separate
vehicular and pedestrian routes and to conceal service circulation. Since convention
42
43

Ibid, pp 241-243
Ibid, p. 251

49

hotels are to welcome high number of traffic access at convention period, careful
study and design is needed to protect the site from being overwhelmed by vehicles.44
Surface parking is the largest site component of a hotel development. Tight
urban sites may have no on-site parking, yet alternative arrangements must be
considered, including valet service and expensive on-site underground parking. The
basic area requirement per each car is 18.5 m2 for valet parking whereas this number
is taken to be 32.5 m2 for guest self-parking (including aisles and ramps).
The location and proximity of car park to the lobby and guest rooms is of
prior importance. The number of car park requirement per hotel room is 1.4 for
convention hotels. If a regional convention hotel is of consideration this number
requires higher provision.
In the convention and conference hotel, the maximum demand in car park
space is created not by the guestrooms but by meeting rooms and banquet halls. The
space need for parking reaches its top level at midnight due to full occupancy by the
guestrooms, but this demand can easily be supplied by nearby parking spaces. Since
access to halls and banquet facilities are at top priority enough space should be left
for those facilities.45

Security
The architecturally utilized security systems are emergency command stations
placed near entrances and loading dock connected with security office. By defining
check posts for security guard staff, utilizing fire annunciation system that is
activated by floors and controlled by telephone switch board. Roadways with
clearance for emergency vehicles should be designed for emergency fire access.

4.2 THE GUEST FLOORS

The planning of the typical guestroom floor presents one of the greatest
challenges in convention hotel design. The major planning goal in convention hotel

44
45

Ibid,p 249
Ibid,p 307

50

project should be to maximize the amount of rentable guestroom space and minimize
the horizontal and vertical support areas.
The optimum plan configuration and building orientation should be in
guestroom blocks, to enhance the appearance and accommodate future expansion. As
a rule of thumb, the plan of the guestrooms should occupy around 70 percent of gross
floor area.46 As lodging demand increases the owner may want to add rooms so to
the design should foresee future expansion either in terms of additional guest floors
or as a new guest tower. So, if possible phased design should be considered by the
architect. By this way each part of the hotel may function efficiently until other
sections are built.
Most of the time the elevators and stairs should be placed at the interior
locations to make maximum use of the outside walls. To minimize the circulation
area the elevator lobby is placed in the middle one third of the structure. For efficient
use of housekeeping space the linen storage, service elevators and vending are also
placed in a central location.
In guest floors the walking distance should be minimized as much as possible both
for guests and housekeeping staff. The corridors in convention hotels are generally
assumed to be 2.2 meters.
Ease of access should be considered for the invalid both in terms of entrance
to hotel and access to the guest floors. The handicapped rooms should be placed on
the lower floors and near elevators.
In downtown convention hotels, the site may be relatively small. The ideal
arrangement of public and service elevators and the column free ballroom often
dictate the form of the guestroom floor and its form in convention structures.47 The
choice of a plan type is the result of a balanced consideration of site, environment
and program requirements, and the architect must realize that a particular shape will
realize the economics of the project.

Alternative Plan Formations for Guest floors

For the operator to realize the profits, the design team must maximize the
percentage of floor area devoted to guestrooms and keep to a minimum the amount
46
47

Ibid,p 257
Ibid,p 258

51

of circulation and service space (service elevator lobby, linen storage, vending and
other minor support spaces).
An analysis of the plans of hundreds of different guestroom floors shows that
some patterns yield more cost effective solutions than others. The choice of one
configuration over another can mean a saving of 20 percent in gross floor area of the
of the guestroom structure and of nearly 15 percent in the total building. For
example, the three principal plan alternatives- the double loaded slab, the rectangular
tower and the atrium- when designed with identical guestrooms of 32.5 m2, yield
final design that vary from about 470 to 850 gross (44 to 54 m2) per room.48
The relative efficiency of typical hotel floors can be compared most directly
by calculating the percentage of the total floor area devoted to guest rooms. This
varies from below 60 percent in an inefficient atrium plan to more than 75 percent in
the most tightly designed double loaded slab. Clearly, the higher this percentage the
lower the construction cost per room, which, in turn, offers the developer a range of
options, build additional guestrooms, improve quality of the finishing or a particular
building systems. This is a very useful approach the extra space requirement of the
convention hotel is considered. The excess space can be utilized in terms of meeting
rooms, recreational areas and as function spaces to serve these utilities.
In general the most efficient configuration in to construct and to operate are
those where circulation space is kept to a minimum -either the double-loaded
corridor slab or the compact centre core tower.

Slab Configuration
The slab configuration includes those plans that are primarily horizontal,
including both single and double loaded corridor schemes.
The high degree of efficiency of the slab plan is based primarily on the
double loading of the corridor, single loaded schemes require 5-8 percent more floor
area for the same number of rooms. The only disadvantage of the double loaded
corridor is the deficiency of the service corridors. Insufficiencies in terms of service
access and long travel distances may be major problems.

Therefore, only where

external factors are present-narrow site dimension or spectacular views in one

48

Ibid, p 258

52

direction- should single loading be considered. Because of its efficiency the slab plan
type is the most favoured layout in convention hotels.
Most of the time the large span ballrooms are solved at the centre with the
meeting rooms located at the periphery. The solution of the guest room floors with
the structure free meeting rooms allows maximum use of site and exterior surfaces
(Fig 4.3).
While slab plans as a category are the most efficient, various approaches can
tighten the layout of typical floor. Configurations that bury the elevator and service
cores in interior corners have several advantages: they reduce the non-guestroom
area, reduce the amount of building perimeter, and increase the opportunities for
creating architecturally interesting buildings. The offset slab plan, for example, is
especially economical because the public and service elevator cores share one area
and in additions they do not displace any guestrooms from the building perimeter.
The knuckle configuration which bends at angles creates the potential for
interestingly shaped elevator lobbies provides compact service areas and breaks up
the slabs long corridors.
The core design is complicated by the need to connect the public elevators to
the lobby and the service elevators to the housekeeping and other back-of-house
areas. This often necessitates two distinct core areas at some distance from each
other, although in many hotels they are located side by side. One common objective
is to position the elevator core in the middle one third of a floor in order to reduce the
walking distances to the farthest rooms. Most of the time the vertical core is fully
integrated to the body of the tower but occasionally, the designer may , for planning
reasons, add the core to the end of a compact room block or extend it out from the
face of the facade.
The actual layout of the core is another determining factor of efficiency in the
typical plan. In most slab plan hotels, the vertical cores require space equivalent to
two to four guest room bays. The comparison of many projects shows that the
vertical core displaces fewer guest room bays when the service areas are located
behind the public elevators rather than beside them or at some distance. Many of the
more efficient configurations also feature a distinct elevator lobby. Such a foyer
space helps to isolate the noise and the congestion of waiting people from nearby
guestrooms. Those plans which incorporate an elevator lobby tend to have fewer
awkwardly shaped rooms, providing a more uniform guestroom layout.
53

Building codes generally require egress stairs at opposite ends of the building.
Careful placement of the stairs provide one more opportunity to create a more
efficient overall plan by reducing gross floor area, compared with simply attaching
the stair tower to the need of the building.
One limiting factor to the number of rooms on the guestroom floor is the
typical building code requirement for hotels with automatic sprinkles that there be no
more than, 91 meters between repetitive guestroom floor is to create a layout that
does not require a third fire stair. The number of guestrooms per floor can be
increased by careful placement of the staircases

Tower Configuration
A second major category of guestroom floor plans are tower plans,
generally organized with a central core surrounded by a single-loaded corridor and
guestrooms. The exterior architectural treatment of the tower can vary widely as the
geometric shape of the plan changes from square to cross shaped, circular to
triangular. The tower plan exhibits very different characteristics than the slab, but
raises a similar series of questions like how many rooms can be fitted and which plan
formation is the most efficient.
Selection of the tower shape creates specific limitations on the number of rooms per
floor in tower configurations. Tower structure contains between 16 and 24 rooms,
depending on the guestroom dimensions, the number of floors, and the optimum core
size. With only 16 rooms, the core is barely large enough for the two or three
elevators, two egress stairs, and a minimum amount of storage. On the other hand,
designs with more than 24 rooms become so inflated and the core so large that the
layout becomes highly inefficient.
For most guest room configurations, the efficiency is improved by increasing
the number of rooms on a floor, with little or no increase in the core or the building
services. With the tower plan, the opposite is true. The analysis of a large sample of
hotel designs shows that, surprisingly, the fewer rooms per floor the more efficient
the layout becomes because the core by necessity, must be extremely compact and,
as a result, the amount of corridor area is kept to the bare minimum. The more
inefficient layouts often result from adding rooms and from extending single- loaded
corridors into each of the building corners.
54

Fig 4.3 The double loaded slab configuration makes maximum use of the exterior wall while
leaving a column free space in the centre in Philadelphia Marriott, Pennsylvania.49

49

http://marriott.com/property/meetingsAndEvents/PHLDT The floor plans are from archive of

Marriott Hotels and Resorts, source being official web site of Marriott International Inc. (21.12.2003).

55

In downtown convention hotels the tower structure is the most preferred plan layout
with its compact structure. The compact solution of the guest room floors in a tower
structure gives enough space for the function rooms. On the other hand, the increase
in the number of the guest room directly effects the height of the building where the
introverted plan type does not allow for phased construction. Since the service core
and elevators are located at the centre the future expansion of the tower type
convention hotel is either done by the increase in building height or by the
construction of a second tower nearby as it is in Swiss Hotel Stamford, Singapore
(Fig 4.4).
The shape of the tower has a direct effect on the appearance of the structure
and on its perceived scale. Those plans that minimize the amount of circulation and,
in addition create unusual corner rooms exemplify the best in both architectural
planning and interior layout.
For circular tower plans, the measures of efficiency are judged by the layout of the
guest room as well as the core design. Typically, the perimeter of the wedge shaped
guestroom is about 4.9 meters, whereas the corridor dimension may be less than 2.4
meters, thus the design of the bathroom, the vestibule and the entrance to the
guestroom becomes a challenge. 50
Generally, the core is centrally located and the vertical elements are tightly
grouped. The smaller hotels those with only 16 rooms per floor, usually do not
feature an elevator lobby. And the guests in rooms opposite the elevators must
tolerate noise from waiting guests.
In the larger tower plans, with 24 or more rooms per floor, the central core becomes
excessively large. Sometimes multi-storey sky lobbies to make this space a positive
feature is used. The efficient design of hotel floors requires simultaneous study of the
core and the imaginative layout of guestrooms to meet the demand for ultra high-rise
mixed use structures around the world

Atrium Configuration
A third major category of guestroom floor plans is the atrium design, which
was reintroduced by architect John Portman for The Hyatt Regency San Francisco

50

Ibid,p.261

56

Fig 4.4. (1a) The compact 1400 room convention hotel Swiss Hotel Stamford solves the guest room
floors within three towers in Raffles City Hotels51

51

http://www.rafflescityhotels.com/swissotel/index.html The floor plans are from archive of Swissotel

The Stamford, Singapore, , source being official web site of Swissotel Hotels and Resorts.

57

hotel in 1967. The atrium prototype had been used successfully late in the nineteenth
century in both Denvers Brown Palace which is still in operation.
Practically all atrium hotels feature glass enclosed elevators that provide the
guest with an ever changing perspective of the lobby activity as well as add
animation to the space itself. In some cases, scenic elevators are placed opposite
conventional ones, creating two very different experiences for the guest. The location
of the service elevator, housekeeping support functions, and egress stair, while
needing to be integrated into the plan and the lower service level, are not particularly
critical to the efficiency of the guest floors (Fig 4.1.3).
In addition to the open lobby volume, each atrium hotel is distinguished by
the plan of the guestroom floors. While the basic prototype is square many of the
most recent atrium configurations are irregularly shaped to respond to the site
constraints. This sculpting of the building contributes to creating a unique for the
hotel, a primary goal in selecting the atrium configuration yet the most inefficient
layout. Recently, architects have sought ways to gain the prestige benefits of the
atrium while increasing its efficiency. One technique that has been successful in
many hotels is to combine a central atrium with extended double loaded wings as
was done in Hyatt Regency hotels in Cambridge, Massachusetts, and Dallas, Texas.52
This effectively draws together the architectural excitement of the atrium
space on a smaller and more personal scale than in the larger atrium volumes with
the desirable economies of the double loaded plan.
However, many developers and architects believe that the atrium design has
become a clich- and also recognize its tremendous cost premium- and seek other
means to create a memorable building and guest experience. Nonetheless, the most
famous atrium convention hotel Hyatt Regency Atlanta is the busiest convention
hotel in the world today.
In spite of the high construction costs the atrium floor plan creates solutions for
many problems that arise in with the high guest room number in hotels. The atrium
space not only creates a spacious lobby and a public space but also produces a
second periphery that the guest rooms overlook. Especially when the compact
downtown site is considered the function space and the guest room combination i

52

Ibid,p 262

58

Fig 4.1.3 Atlanta San Francisco defines the astonishing beauty of the atrium space designed by
architect John Portman in 1967.53

53

Riani Paolo, John Portman (Amer Institute of Architects: Portland),pp 119-121

59

best viewed in these type of hotels. The atrium is placed over the banquet hall or
ballroom for structural solutions.

GUESTROOM AND SUITE DESIGN

Design Criteria for Guestrooms

Designers recognize that the specific needs of the target markets and identity
features and amenities that these groups most want and expect. In general terms, the
transient business person looks for single accommodations, the convention and group
markets need double rooms, and the leisure market requires rooms to sleep two or
more guests. The management of the worlds busiest convention and entertainment
centres, Walt Disney World and Universal Space in Orlando, design their rooms both
to serve the single business men and the attendants who come with their families.
The management requires two queen beds in rooms and a convertible sofa to
accommodate a vacation family of four to six. Because each of these market groups
use hotel rooms differently, the designer must consider work and meeting functions
in one case and family activities in another. The basic room layouts are shown in.

Room Dimensions and Configurations

The business related meetings that last for 1 day generally require 90 percent
of the hotels to be of single occupancy rooms. Hotels that serve for different use
groups prefer to occupy one double (or king size bed in majority of the rooms. The
free left space can be used in the form of a workstation with a desk, TV screen and
terminals for use with desktop computers (Fig 4.4a).54
The room in European convention hotels are smaller due to higher land costs.
Thus when compared with the American room dimensions the total guest room floor
turns out to be smaller. The total floor area of a convention hotel guest room in
Europe is 62 m2 of which 44 m2 is left for guest room and 18 m2 for public and
support areas.55 The gross area thus in American hotels are 65 m2 in guestroom total
area where 47 m2 is only for bedroom (Fig 4.4.b).
54
55

Obcid, Lawson, p. 131.

Obcid. Rutes, p 269

60

The guest room design decision which most influences the room layouts and
much of the guest reaction to hotel is the choice of three critical room dimensions the
inside or net width, the length of the room from exterior wall to the bath room wall
and the size of the bathroom. The net width establishes the structural module
throughout the building (equal either to the width of one room or two rooms) which
carries through to the public and service areas on the lower floors. The most common
width for the last several decades has been 3.7 meters which was first adopted in mid
1950s by the Holiday Inn chain for all their roadside facilities. Until then, even the
newest and largest convention hotels built in the post-World War II period
incorporated a variety of room sizes, including a large percentage were narrower than
the 3.7 meter wide standard. These hotels, many of them still operating and
competing with properties 30-50 years newer, are limited by the smallness of their
guestrooms. In the US and Canada, no first class or chain- affiliated hotels are built
today with rooms less than 3.7m wide.
Companies which are selling a more luxurious room have experimented with
larger guestroom spaces and, especially, have created innovative bathroom layouts.
Increasing, the width of the room module to 4.0-4.1 m. permits one major change in
the room layout a king-size bed can be positioned against the bathroom wall instead
of the side of the wall allowing for a variety of furnishing arrangements (Fig.4.4.a).
The wedge shaped rooms and the characteristics of circular towers present
their own design problem in the layout of the guest bathroom. The smaller towers
have a corridor frontage of only 1.8-2.4 m., the larger diameter tower a more
reasonable 3 m. Although, many of these room plans show such positive features as
compartmentalized bathrooms (out of necessity), compact foyer space, a large lounge
area, and expensive window wall, todays increasing competition in room size and
upscale furnishings has made the similar cylindrical towers virtually obsolete.
As a general approach, the upscale convention hotels prefer their rooms to be
around 35.2 m2 where as the luxurious hotel chains keep this value at 41.8 m2.56

56

Obcid,Rutes p 270.

61

Guest Room Functions

The full list of furnishings can be determined by analyzing the guestroom
functions- sleeping, relaxing, working, entertaining, dressing- and their space
requirements. The plan of the typical hotel room clearly shows these several zone,
the bathroom and areas for dressing and clothes storage are grouped next to the
entrance vestibule; the sleeping area is in the centre of the guestroom space; and the
seating and work areas are located near the window. New layouts combine the
several functions in different ways or find different ways of separating them more
fully.
With the counting increase in construction and furnishing costs, it becomes
more important to develop innovative layouts for guest rooms- designs that combine
function and comfort within realistic budgets. The designer may increase the comfort
of the room by using a queen or king size bed where as beds smaller than (2 m) king
creates more open space. Convertible sofas or wall beds provide more open space
and flexibility, either as the second bed in a queen or a king room. Adequate luggage
and cloth spaces should be provided by sufficient drawers, luggage rack and closet
space. In order to reduce loss of space by different furnitures different functions can
be combined in one item. The TV cabinet can be combined with a pullout writing
ledge. In this manner wheeled computer stand that rolls under the make-up table can
be useful. While mirrors are used to enlarge the space the wall mounted bedside
lamps would permit smaller night table.
The most important property of the convention guest room layout is the
flexibility it provides. Most of the convention delegates prefer an office layout in
guestrooms in day time to make their private business meetings. Where as, at night
time the bedroom layout is favoured. So in convention hotels like Hyatt San
Francisco folding wall beds are preferred to achieve the flexibility. Suites are
preferred for executives. A suite is simply defined as a living room connected to one
or more bedrooms. Larger hotels frequently provide a hierarchy of suites, from single
bay living rooms with a sleeping alcove to multiple bay living rooms with connecting
rooms, including dining, conference rooms and one or two bed rooms. The living
room and bedroom are completely separated where the living room accommodates
spaces for formal and informal meeting environments. These suites generally house a
conference table with a lounge area. Upgraded suites like presidential and
62

congressional suites hold a parlour space of 3 to 8 bays Fig 4.1.4.c, d). These spaces
are generally used for receptions and large scale private meetings. The bedroom bays
of these units generally hold double twin beds. Generally a wet bar and kitchen is
also housed in these rooms. The operators found that these small suites held great
appeal to the travelling businessperson and family, both of whom appreciated the
separate bedroom and the living room and the provision of a small kitchen.57.Within
the last decade, the convention hotel has started offer different incentive
environments of informal spaces. The concierge or hospitality being one of these;
have become the stages where incentive attendees either relax or give receptions.
Being a buffer zone generally these rooms are located between the guest rooms and
the function rooms (Fig 4.1.4.e)
Convention hotels provide up to 10 percent of the total guest room count on
suites. These most likely to are positioned on the upper floors of the tower where the
rooms have better views, but may be stacked vertically where 8 unusual conditions
occur. Suites may be used to fill any larger structural bays on the typical floor, grow
into additional area behind stairs or elevators, or are located where the building form
provides uniquely shaped rooms.
Many hotels now offer concierge or club floor levels to offer a higher quality room
and additional amenities at a premium price. Usually representing 10-20 percent of
the total room count, the club floor rooms are identical in size to the other rooms but
they are with better finishes, furnishings and bathrooms amenities. More important,
to more guests are the additional services available in the club floor lounge,
including express check in and checkout, complimentary breakfast, tea, cocktails and
evening snacks, and the more personal service of a concierge of the gust floors. The
lounge space usually is equal in size to at least three guestrooms and, in major
convention hotels, with private conference rooms and additional business services,
may displace as many as six to eight rooms

57

Obcid, Rutes, p 275

63

(1a)

(1b)

(2a)

(2b)

(3a)

(3b)

(4a)

(4b)

64

(5)

Fig 4.4. Specific room plans of convention hotels. The room properties are basically defined with
respect to the hierarchy within the company or association. .(1a) Standart room of Ballagio
Convention Hotel, Las Vegas. b). Double queen bed layout for Ballagio. (2a) Layout with wall bed,
used as office in day time. b) The upscale executive completely separates the work and bedroom
areas; Hyatt Regency Washington D.C. (3) The presidential suites include 2 bay bedroom units with a
large parlour area of 3 to 8 bays, including lounge, meeting and workstation and living rooms Hyatt
San Francisco Convention Hotel. b) Smaller version wall bed.4) Hospitality suites and congressional
suites are used for the private receptions and include a wet bar and a kitchen that is used at the
luncheons and afternoon meetings. 5) The concierge floor is the semi private meeting space of the top
priority meeting attendees where they carry their meetings in an informal reception atmosphere;
Sheraton Hotel, Toronto.

Barrier free Guestroom Design

One area where accessible design is most evident is the handicapped
guestrooms; a small number of rooms which feature larger bathrooms with different
fixtures like roll in shower stall must be provided. A number of features intended to
make the room better accommodate a person with specific disabilities is at prior
importance.
According to a survey done by Microtel Inns and Suites among 20 million
people with disabilities; primarily accessible showers, and large bathrooms are
among the first request that are favoured by disabled. Secondly, enough space for
easy manoeuvrability and easy access to guestroom controls are wanted.58

58

Ibid, p 275

65

Guest Bathrooms
Nowhere in the room is planning and design more important than bathroom. The
optimum comfort today is supplied within the dimensions of 1.5 by 2.4 meters.
These dimensions are to accommodate three standard fixtures of hotel bathrooms, the
bathtub, wash basin and the toilet. But competitive pressure, and marketing, and
guests eagerness for something better than they have at home, has pressured the first
class and luxury hotel operators to add fixtures and other amenities. By 2000 it was
common for the downtown convention hotels, catering to a single business traveller,
to offer a bathroom with a large sink/counter bathtub, separate shower stall and
compartmentalized toilet.

Guest Room Equipment and Technology

The end of the twentieth century was a period of incredible innovation in
hotel technology, much of it appearing in the guest rooms. Because nationwide
nearly 60 percent of

all room nights were generated by business travellers ,

companies such as Marriott announced that they would install high speed internet
access in all their guestrooms, in addition to the meeting rooms and business centres.
These Ethernet based systems offered connection speeds of 50 times faster than
normal phone lines and further do not interfere with normal telephone lines.59
.At the Peninsula in Hong Kong a bedside panel controls lighting, heat and
air-conditioning, television and radio, and the draperies. The peninsula is studying
how to install ultra-thin televisions, which would eliminate the need for the armoire,
thereby changing the whole appearance of the room. Such as high-tech television
might become integrated with the video telephone offering a larger than life-size
visual link to home or office. Additional innovation is likely in guestroom door
locks, which can be programmed to recognize a guests voice or thumbnail.

59

Ibid,p 276

66

Conclusion
Flexibility has become the term to define the guestroom for convention hotel.
The rooms are designed to be combined in different ways to answer the different
needs of the convention attendees. Within the terms of this flexibility hotel
developers are trying to give the most of home environments in the newly growing
convention destinations. The remainder of the room will not increase in size.
Developers will attempt to hold down overall increase in floor area and construct
costs by maintaining overall room dimensions close to the current size.
Innovation in the guestroom and guest bathroom may be obvious because the
spaces are so personal. We are all aware of how design, weather texture or
technology, affects our satisfaction with the environment. Also, we are sure to
measure our overnight accommodation against our own home, whether it is to be
heated towel bars or unusual lighting or some idiosyncratic feature that each one of
us cares about. Communication systems will evolve an incredible rate and hotels
must develop a flexible infrastructure based, most likely on the TV-cable distribution
system. High standard internet access has become a standard amenity.60
Although the entertainment systems will exist in business oriented hotels, it
will be less dominant. Flat screen TVS should become standard freeing their
dimension from the dimensions of the armoire. Eventually, entertainment and
computer will become fully integrated, allowing guests to interweave sports
programming with movies with office work. Designers will continue to explore
alternatives to the traditional desk offering more work surface, computer cart, better
lighting, and ergonomic seating.
Exercise equipment may find its way into rooms in business oriented hotels.
Hilton has started the in-room fitness program where each guest may have his
personal trainer.
Guest bathrooms will increase in size as guests demand more spa-like
features including whirlpool bath, multi-head shower and exercise equipment. The
bathroom will become more physical and visually integrated with the hotel room
with privacy provided by polarized glass partitions or sliding panels.
60

Hotel International Guidelines for Hotels: Typical Guest room Areas (Hilton Hospitality
Inc.,:2002), pp 201-211

67

4.3 PUBLIC SPACE DESIGN

While the hotel guestrooms make up the majority of the floor area in virtually
all hotels, it is the public space that defines the differences among various types.
Because the lobby, restaurants and lounges, meeting and banquet space, and
recreation facilities vary so greatly, understanding the distinctions among the
different hotel types is crucial to programming a successful hotel. In this manner
convention hotels and conference centres need extensive meeting and banquet space.
In addition to providing the appropriate mix of facilities for each hotel type,
architect must create a plan that meets the functional requirements and market
objectives as defined by the developer and the management company. The first class
and deluxe operators look for efficient plan layout while they are more concerned
with the visual qualities of the building and providing a level of amenity; these
companies will accept a less economical layout in order to accommodate a more
appealing and leasible architectural and interior design features.
The planning and design objectives of the public spaces are that they are
designed around the lobby. This arrangement assures that the hotel guests can find
the various facilities with a minimum of difficulty and provides the opportunity for
the functions to overlap. Hotel atrium lobbies, especially, exhibit such
characteristics, where the guest registration area, multiple restaurants and lounges,
meeting pre-function space, guest elevators, and upper floor corridors, all occupy the
same volume.
A second major objective in high rise convention hotel projects is to organize
the public areas with an understanding of their location in relation to their location in
relation to guestroom structure.
This is important for two reasons: one, the architect needs to plan the lobby
floor so that the major guest circulation from the entrance to the elevators is
convenient and logical. Two, the designer must position any long span spaces,
primarily the bathrooms, so that they are not directly under the guestroom tower, in
order to simplify the structural design of the hotel and reduce construction costs.

68

Arrival
Larger hotels may develop a number of different entrances to help separate
overnight guests and visitors, to reduce the amount of unnecessary traffic through the
lobby, to establish a distinct identity for a restaurant or other facility, or to provide
increased security. So, the relative need for the main entrance, ball room or banquet
entrance, restaurant-bar-casino entrance, tour bus and airport drop-off entrances and
condominium entrances should be evaluated.
Each entrance needs to be clearly identified according to its function with a
canopy, signage, special illumination or other architectural treatment. Some
entrances require space for waiting taxis or buses, others require temporary luggage
storage. Orlando or Las Vegas that have heavy volume of arrivals due to convention
events requires six lanes of porte cochere for hotel entrances.
The design requirements of the hotel entrances can be summarized under the
headlines of design of the canopy, driveways, parking, sidewalks, doors and
vestibules. A porte cochere or a covered drop-off at the main entrance and principal
secondary entrances for the ball room or restaurant to protect guests from inclement
weather should be provided.
Sufficient height for busses and emergency vehicles should be supplied. In
many countries a service road around the facility is kept necessary to allow the
passage of fire vehicles in case of emergency. The amount of traffic should be
predicted before and number of aisles and queuing space for waiting taxis, loading
and unloading of passengers and luggage and short term standing including valetdelivered cars, tour or airport busses should be provided.
The garage access should be made convenient to and from the main hotel
entrance; if there is valet parking, a location for the valet office near the main
entrance should be provided. For the doors and vestibule, a weather vestibule should
be provided with revolving or automatic doors to limit temperature differences.
Access into luggage storage room should be provided for curb. Ramps must be
provided both for the disabled guests and luggage. Pedestrian areas must be designed
wide enough for handling baggage, storing baggage carts, and providing doorman or
bellman station. Especially when bus locations are considered extra space should be
provided for the groups to assemble.

69

Lobby
The most successful designs carefully balance two features that are visual
impact and function. For the most of the past century, until the Hyatt Regency Hotel
opened in Atlanta Georgia, in 1967, most Hotel lobbies were relatively small,
designed along the same economical principles as the rest of the hotel. However, in
the 1970s emphasis shifted toward larger lobbies by the mergence of the convention
hotels. . Larger hotels, such as convention properties and those located with-in
mixed-use projects, require a great amount of space to accommodate the number of
guests and visitors drawn to the variety of facilities.
In convention hotels, for lobby space 2.1 m2 of space must be evaluated for
each room. The restaurant capacities must be designed as oversized since the
customer attendance will reach peak levels in late afternoon sessions and at evening.
10 percent of the lobby space is reserved for lobby lounge area.
For management control and security, the circulation for non-resident visitors
(to shops, restaurants, meeting rooms and function guestrooms). The minimum width
of those routes must be 2.20 m which is two people passing together with luggage.61
The front desk length for a 150 room hotel is 4.5 metres at minimum. For
each additional 50 rooms extra 3m front desk is added to the lobby. 2.5 meters of
queue space must be left in front of the front desk not to obscure the circulation
routes. The reception desk must broadly cover the cash, registration and operator
rooms and in direct contact with the mail and key banks. Appropriate connections
and access must be provided to the front office, safe deposit, executive offices and
sales and catering offices from the lobby.
For convention hotels at least 6.1 meter of clear distance should be left in
front of the reception for clear circulation. If required a desk and seating should be
provided near the front desk for the managers assistant. House phones close to the
front desk and public phones convenient to the lobby should be provided. Generally
1 phone per100 room is preferred.
Locating bars, restaurants and retail kiosks within the lobby is one way to
increase the apparent size of the lobby space without adding additional gross area.
John Portman states that, additional lobby functions create variety not only in scale

61

Obcid, Lawson. F.,p 125

70

but relative level of activity, with relative usage through out the day. In order to
accomplish this diversity successfully, the best plans provide clear definition of the
several functions that occur within the lobby and make their organization obvious to
the guest.62
The planning requirements of most hotel lobbies are same regardless of the
type of the hotel. In addition to establishing the image of the hotel, the lobby serves
as the main circulation space, directing guests to the front desk, elevators, food and
beverage outlets, meeting and banquet facilities, health club, and other public areas;
as guests linger, it serves as an information gathering space. It also functions as a
security control point, where the staffs are able to visually supervise access to the
building.
Additional exterior entrances should be designed for the main lobby, banquet
facilities, restaurants or other high traffic areas. The front desk should be located so
that it is immediately visible to the entering hotel guest and so that desk personnel
can visually over see access to the passenger elevators.

Lifts
Considering the high mass of passenger traffic different lifts are requires for
passenger and freight circulation. Separate lifts for hotel guestroom flats and
ballroom-meeting room base floors. The forced flow between ballroom, exhibit
hall and meeting rooms must be maintained via escalators. Special freight elevators
of car size must be chosen to carry loads of ballroom and exhibit spaces. Separate
elevators are necessary to serve roof top restaurants and bars that are used by outside
visitors. For security means special elevators that travel between garage and lobby
level must be designed in order to control check-in and check-out flow. For special
suites a second reception desk is located at roof floors to ease access of privileged
guests. A special elevator is utilized between the garage floors and these floors.
Apart from these elevators for staff, luggage and service must also be provided.
The guest elevators are at prior importance for the lobby. In order to provide
ease of control, the elevators should be located near front desk and main entrance.
Enough lobby space must be left for the handling of the luggage. Bellman station

62

Riani Paolo, John Portman (Amer Institute of Architects: Portland),p 120

71

should be located near the front desk, elevators and the main entrance and the
luggage storage should be located nearby.
A seating area near the desk and entrance including some private seating
groups and additional seating contiguous with the lobby bar is essential. Clear paths
to the front desk, elevators, restaurants and bars, meeting and banquet halls are
essential. If possible convention oriented guest traffic must be separated from the
hotel guests.
In places convenient to the guest traffic lease spaces should be provided. The
support functions such as toilets, house phones, public telephones and assistant
mangers desk conveniently in relation to other areas.
Some design issues concerning the design of the lobby are related to the back
of house (the front desk), others to food and beverage (lobby bar), and others to
organizing the public flow.

4.3.1 Food and Beverage Outlets

Food services in convention hotels cover a wide range of requirements. The
outlets include, restaurants, coffee shops, function rooms and banquet services,
individual service to guest rooms, employee meals and serviced shops and site
outlets.
Each type of production and distribution arrangement has different
characteristics but, to a large extent, several of the preliminary stages (bulk storage,
preparation and initial cooking) can be rationalized and combined in a central
production facility.63For better service and management the distribution and routes of
meals and services should be decided. The use of lifts and integration with other
service roads must be evaluated.

63

Obcid, Lawson, p 144

72

Lounge and Bar Design

The lobby bar was developed in 1970 in order to create activity and
excitement in open atrium spaces in large hotels. After it proved itself as a popular
meeting space and revenue generator, the lobby bar became standard in most types of
hotels and locations Fully open to the lobby space, separated only by planters,
railings, a water feature or a level change the lobby bar provides additional public
seating when it is not used as a beverage outlet. Nowadays these spaces are also used
for continental breakfast or late evening snacks.
The achieve success in operation the lobby bar has to be located in an area
that obviously visible to hotel guests. Lounge seating should be preferred for the
lobby bar and furnished with sofas, chairs and a few seats at the service bar. A place
for the piano or other entertainment facilities must be provided. For food service,
continental breakfast and snack service a back of house access must be considered.
Completely different than the lobby bar the entertainment bar is enclosed to reduce
high noise levels and more closely spaced seating. These type of bars generally
feature a sports or entertainment theme. In order to maintain acoustic isolation a
sequence of entrance must be designed. By this way the sound and visual isolation
between the bar and the hotel circulation area could be provided. Distinct zones for
the bar, video games, entertainment and dancing is essential. About 10-25 percent of
the bar is generally used for the lounge area. An integrated section to accommodate
at least half of the guests- multiple video screens and display of sports- is essential.
The entertainment area occupies around 50-65 percent of the total bar area. A
separate lounge space is used to make the guests sit outside the active zone. But this
lounge should be in visual contact with the service bar and the entertainment zone.
The central kitchen has to be in relation to food and beverage outlets. Noise
and disturbance due to discharge of fumes and engineering plants must be avoided.
The necessary space for staff facilities must be thought in prior.
The delivery of the goods to restaurants must be supplied by means of
elevators or a debarked area. The loading docks of kitchen area must be in direct
connection with the control offices, passages to stores and security. Since large scale
banquet meetings are of concern; storage of food waste, chilling equipment,
recycling and waste containers must be supplied in relation with the kitchen. Vehicle
areas must directly reach the waste containers for loading means.
73

House Keeping and Laundry Services

Hotel house keeping services cover two main areas, the guestrooms (cleaning,
linen replacement and removal of waste) and public areas (cleaning, removal of
waste and removal of consumable items).

Administration Offices and Staff Facilities

Large number of personnel is employed in convention hotels. Administration
services must be located in adequate locations for the control and management of the
hotel personnel. The main administrative offices located in convention hotels are,
front office, personnel office, engineering office, food and beverage sales office and
the general coordination office. The front office services include operators, paging
and communication services. In most convention hotels these are extended to provide
business services facilities to guest and this type of facilities are also available in
convention and exhibition function rooms.
Hotel guestrooms also offer an increasing range of work related and
information facilities, including two or more ISDN lines for telephone, computer and
facsimile transmissions and interactive television screen systems.64

4.4 CONVENTION HALL DESIGN

Ballroom design

Pre-function spaces and Foyers

Separate foyers are required for each of the main halls and for each group of
meeting rooms. The foyer provides circulation and assembly space leading to
different parts of the hall, including each floor level and any area that may be
separated by divisions. Foyers in convention events provide refreshing sessions
between working periods. The required area for foyers is 0.3 to 0.5 m2 per person
64

Hotel International Guidelines for Hotels: 201 Typical Guest room areas(Hilton Hospitality Inc.,
2002) p, 201

74

based on capacity of hall. The foyer for the main convention hall is generally 0.3
to0.4 times of the ballroom area. A separate entrance to the backstage area is
necessary for speakers, entertainers and technical services (television and projection).
Vestibule should control sound and light penetration and insulation and
screening. In vestibules video monitors and viewing panels are utilised to show
information on activities and performances inside. The door width of auditoriums
must be minimum 2.2 meters.
The main theme, convention facilities of hotels must be carefully considered.
The flow of attendees must be very efficiently designed between the ballroom,
exhibition room, meeting room and the break-out rooms. Due to site regulations
some facilities may be required to be located on different floors, if so; visual
coordinating and assistance should be supplied via escalators, grandiose stairs or
visible panoramic elevators.65

Ballroom Dimensions
Although large spaces are necessary for big convention organizations
generally rather small conventions take place in meeting rooms and ballrooms.
Within periods different organizations overlap and they require independent
entrances and exits.
The meeting rooms of different dimensions are utilised for different meeting
types with different requirements. Large group meetings that require full attendance
are named as Plenary sessions. These sessions generally take place at the main
ballroom. When alternative choices of lecture and symposia occur parallel sessions
are arranged at meeting room that are small in size yet close to each other. The
workshops that take place with group participation are called Break-out Sessions.
Formal dinning generally take place in main ballrooms and are used for gathering
and introductions. For display of related products and information exhibitions are
preferred. 66
The capacity of the main meeting room is important to attract large
conventions. But, the greatest demand comes for the medium size meeting and
65

Ibid, p. 133
Lawson F.,Congress, Convention and Exhibition Facilites: Planning Design and Management
(Architectural Press: London), p.64

66

75

breakout rooms and smaller meeting and function rooms. Within whole hotel facility
6.6 m2 of public space is required per delegate including Ballrooms, meeting rooms,
exhibition areas, reception and existing pre-function rooms in the hotel.
Unlike any other hotel facility the convention hotel requires large service corridors.
The minimum width is taken to be 2.7 meters. Due to special technical audio visual
requirements and storage of partitions of meeting rooms the usable width of the
corridors would be less at finishing. The minimum corridors with for non-service
paths are 2.2 meters.
For each group of meeting facility, ballroom and group meeting break-out
rooms, enough number of toilets, cloak rooms, meeting-planners office, and business
centre must be supplied. The meeting registration desk must be visible from the
appropriately located escalators and grand stairs.
The technical space requirements of the ballrooms must be taken into
consideration in sections. The projection rooms, control, audio and lighting rooms
need overlook ball room. A mezzanine floor should be designed over the prefunction space. The minimum height for a ballroom is 4.9 meters. Yet, a ballroom
over 1400m2 requires a ceiling height of 6.1meters. <the central areas of the
ballroom are generally kept higher to feature lighting fixtures, air grills and other
systems.
Especially for exhibits, direct accesses of loading trucks are essential. Usually
convention hotels prefer to use the ballrooms as an exhibit space as well. So if
possible the docks should be in direct relation with those spaces. For freight and
passenger elevators, these elevators must be separated from the actual elevators of
the guest room floors. Otherwise the waiting time of the elevators would increase up
to uncomfortable durations.

The Seating
Among the seating possibilities, the layouts that provide comfortable work
spaces are preferred. Classroom and conference layout type are among these
possibilities. These layouts are generally preferred by small group executive
meetings in high quality hotels.67

67

Ibid, p 137

76

Public Facilities and Services

For large halls 2 water closets must be supplied for the first 500 and an
additional wc must be supplied per additional 500 attendees in mens toilets. On the
other hand 1 urinal per 2 attendees is essential. One washbasin per each wc and one
wc for each of five urinals must be maintained. For womens wcs 1waterclosets is
necessary per each 75 delegates and 1 washbasin is supplied for each water closet.
In pre-function spaces of large meeting rooms, cloakrooms must be placed
with 0.1 m2 space for each delegate. In order not to obscure the circulation routes, the
counter is set back 1.2 m.

Meeting Room Design

93 m2 is considered to be the most flexible room dimension for a typical
meeting room that permits flexibility for large and small break-out sessions with
either conference or theatre style seating.
The general height for meeting room is taken to be 3.3 meters at minimum.
Meeting rooms require 0.9 m2 area per seat in conference seating whereas
they require 1.1 m2 per seat in banquet layout.
One or more large halls with column free structure are essential in convention
hotels. Each room must have its own access and lighting, sound, audio visual
properties. Large numbers of meeting or breakout rooms are also called as syndicate
rooms which are to be used with parallel sessions of meetings. These meeting rooms
must be accommodate different sizes of meeting groups with sizes 20,50 to 100
people in theatre and classroom arrangements.
Kept in two types, small meeting rooms are generally furnished under theme
of meeting rooms. There are also rooms that can be adopted for dual use. Dual rooms
are generally attached together within the connecting doors having an extra storage
space. When not used these spaces are utilised as family rooms or suites. In contrary

77

to normal suites these rooms have higher comfort level with extra air-conditioning
and services.68

Technical Constraints for Meeting and Ballrooms

Adaptability of meeting space is usually a critical factor in marketing and
achieving high utilization. On the other hand, partitioning of rooms adds significantly
to the duplication of services and costs and is not normally practical for rooms of less
than 80m2. In planning room division, consideration must be given to resulting room
dimensions (in relation to furniture layouts, height) optimum ratios of length: width
is 3:2 for division into 2 and 2:1 for division into 3. The division into 3 is preferable
in larger halls since it allows for 3 separate rooms with 2/3 and 1/3 areas. Both the
main hall and each divided area must have individually controlled technical spaces
(air conditioning, lighting, communication and audio-visual equipment.). High noise
insulation standards must be specified, including, including the flanking of paths
through the ceiling. A balance of sound absorbing surfaces is required to the noise
due to reverberation in high ceiling areas.
The partitions in large halls must be placed in coordination with the structural
framework, for the panel rollers are fixed to the beams. Moreover, enough space
must be left at the edges of the halls to hide the panels when not used.

Banquet Organisations
Banquet layouts are usually specific to the occasion. The necessary space is
often taken as 1.2 m2/seat to allow for different setups. The necessary banquet space
for whole hotel is calculated by assuming 100 percent occupancy of hotel. For formal
occasions, tables may be arranged in rows at right angels, social events and
conventions usually require clustering into separate groups, often using round tables
rating 8, 10 or 12. Ten is normally the optimum group number to give the highest
seating density.69
For dance activities an area of carpet may be covered by dance square and the
tables may be arranged readily around to maximize the view, often with minimal
68
69

Ibid,p 138
Ibid,p. 140

78

space between seats. Performers usually require changing/restrooms, separate stage

entrance. Storage areas required for furniture and equipment can add up to 5-10
percent of the hall area and its preferred to be located on the same level with
ballroom.
Typical row spacing used for seating in conventions is generally1meters
between seating. At least two separate independent means of egress is necessary,
with the exits sufficiently remote from each other to allow alternative directions of
escape must be provided for up to 500 occupancy. An additional exit is required for
every 250 occupants above the capacity.
The stage height preferred for convention facilities should be more than 0.3
m. not to screen the stage from the front rows.
For convention meetings minimum depth of stage is 2.3 meters and the
minimum width is 4.5m allowing a range of activities such as discussion panels and
supporting displays. For clear sight the height of the screen should be places
minimum 1.8 m. above the stage.
The function space must be located close to the hotel lobby and it should be
easily accessible from this area. Other function rooms such as exhibition halls and
audio visual room s need to be placed near the convention hall but within some
distance to support sound insulation. Adjacent to the function areas toilets,
coatrooms, telephones, and convention service offices must be located. As one of the
most distinct property of the banquet halls and ball rooms, direct food service should
be supplied to these facilities. The banquet pantry must be located at the same level
with the ball room. The necessary storage spaces must be designed adjacent to these
halls.
In convention hotels the guest room hotel is preferred to be constructed
independent from the convention hall so as to simplify the building structure.
Convention hotels especially those that serve as the headquarters for a major
meeting may attract one major group or four or five smaller groups at one time. For
the occasions when a single major convention is in the hotel, it is convenient to have
the ball room, junior ballroom and several meeting rooms immediately adjacent to
each other, perhaps sharing a foyer or pre-function area. This is the usual and
preferred arrangement in midsize 250-400 room hotels.70
70

Rutes W., Penner R., Lawrence A., Hotel Design Planning and Development (Architectural Press:
London), pp 297-298

79

The coordination among the design team is especially important in the

evaluation of the details for the function space. The architectural aspects the
proportions, the divisibility, access and the interior design coordination for the
finishing, furnishings and lighting have critical importance. Moreover, the
engineering projects, the ventilation, the lighting system and the fire protection
system need to be designed and coordinated parallel to the architectural and interior
decoration projects.
The seat number of a convention hotel ball room is calculated by doubling the
guest room number. Different than ballroom the banquet spaces need natural light.
The banquet room capacity of a hotel may vary between three times to a quarter of
the ballroom of the hotel. The meeting rooms which are built with limited divisions
happen to serve with audio visual equipment and are 0.4-0.6 times of the ballroom.
The Board rooms which are used for high level meetings are located separate from
other meeting rooms and are furnished with superior finishes and audio-visual
equipment.
The exhibit halls that are the most profitable spaces of the convention hotels
are designed with display access and floor loading and high ceiling. They require
high lighting level and the number of booths depend on the size of the convention
hotel.71
Many designers and hotel operators have found that one critical element in the
function room is the design of the ballroom ceiling. When a hotel ballroom is set up
for a banquet or meeting, the tables and attendees obscure most of the floor and the
lower part of the walls. The ceiling though is totally visible and contains downright,
chandeliers, and track lighting s well as mechanical diffusers and return grills,
sprinklers and sound system speaker, smoke detectors, and movable wall trucks all
must be integrated into a single cohesive, organized and attractive pattern. Not only
the electrical outlets but telephone television, and microphone jacks, controls for
various projectors projection screen, and lights and in some cases a wet utility panel
must be provided. Exhibit halls should contain electrical outlets every 3m in floor,
ceiling mounted spotlight tracks every 9m on centres and convenient water and drain
connections for exhibitors.72
71

Lawson Fred, Congress,Convention and Exhibiton Facilites (Architectural Press: London), pp.138140
72
Obcid, Rutes W.,Penner H..,Hotel Design Planningand Development ,p 300

80

Leisure Activities
Leisure attractions are important in marketing hotels to business groups. In
city centre locations facilities are normally enclosed, as health, fitness or lifestyle
suites, to ensure all year round availability. Exceptions may apply, as in tropical
climates, where outdoor landscaped pool may also provide attractive vista for
surrounding bedrooms and restaurants.

81

CHAPTER 5

FEASIBILITY STUDY FOR CONSTRUCTION OF A CONVENTION

HOTEL IN ANKARA

5.1 The Market Research

In 1970s when the convention and exhibition facilities were introduced it
was seen that the trade fairs demanded a lot larger exhibition spaces than existed.
This is also seen today in Ankara that although there is enough space for conference
activities there is a lack of exhibit area in many cases that should support the meeting
activity.
So we can simply state that;
Trade shows and exhibit groups began to find that educational activities are
also needed to be served for their industries and what had been pure exhibit events
added meeting components to their schedules.,
The meeting activity serves for three basic needs.
1. Information based meeting
2. Exhibition (run separate or simultaneous with meeting activity)
3. Educational Activity (As a commercial, company or political meeting activity)
The key concept for exhibition facility is flexibility. For one thing, flexibility
means that individual spaces should have the capacity of being reconfigured to make
smaller spaces and even to serve swing space which can be a an exhibit hall for one
group and meeting room for the next.73
Another aspect of flexibility is to create facilities which can accommodate
multiple user groups simultaneously. For example, you need more than one front
door to the facility. Every group wants to be made to feel they are the only meeting
in town. In most of the convention hotels in city centres, due to lack of space this
73

Spickard Steven, Economic Impact of Convention Centers (presented to 2nd Annual Conference of
the National Council for Urban Economic Development), www.hotelonline.com in link with
Economic research Associates (ERA) , 22.01.2003

82

becomes an invalid approach. Through design phase, different traffic approaches

should be considered in site selection. The basic handicap seen in downtown hotels
like Sheraton Ankara, Grand Hotel Ankara and The Marmara Hotel is that they are
stuck in small site areas with limited traffic access.
This problem can be solved in site analysis solutions by allowing multiple car
park facilities and approaches at ground floor level. A second problem can be
considered that, in a single convention or trade show event a boom of four or five
day activity is followed by four or five day of move in and move out, during which
there are no guests in the hotels.
Generally when two incentive groups are accommodated the schedule is
interleaved or moved so that while a group is in the middle of a meeting the other is
moving in or out. So the hotel or facility has a continuous density of business.
It is always stated that a new destination or development is harder since the
meeting community does not know what to face. In virtually every community there
is a demand for people to get together for seminars, parties and weddings. Those
users will pay to rent meetings facilities for a few hours, but they do not contribute
much to overnight visitation. It is the overnight visitors that create most of the
economical impact for convention centres.
One day meetings do not tend to draw people from great distances and even when
they do those people have little opportunity to spend significant amounts of money.
Only the best facility of a single hotel is not enough. There must be a sufficient
quality in hotel; there must be quantity of rooms, personnel that can be booked for
use by a single group in advance at a certain discount.

There must be additional

hotels in good quality nearby to support side market conventions, fairs or other
delegates that will stay in advance. Those facilities must be close to meeting spaces,
transportation and airport facilities.
For the overnight stays air traffic is chosen where the day use market for short
meetings is often composed of drive in traffic. A major meeting location requires
convention access.
Other attractions besides the meeting facilities are also necessary to create
interest in the specific location. Cities such as San Francisco and New Orleans have
become known as great places for adult delegates, with the urban cultures and
entertainment and shopping facilities. Other groups may be attracted by the
commercial attractions. Disney theme parks have been great for the convention draw
83

in Anaheim and Orlando. As meeting groups get more resort oriented, golf and other
recreational facilities become more important.
The meeting planners rate cost of food and lodging as the first criteria for
choice of site selection. Travel connections and costs are close behind in importance.
The inventory of hotel rooms is also very important, and is based on the number of
rooms that can be blocked for convention business, not on the gross number of hotel
rooms in the area. Meeting planners are also looking for a large block in as few
individual hotel properties as possible. The hotels built in major metropolitan cities
are situated close to each other on the other hand increasing the competitive
environment while increasing the possibility to attract a large group of delegates for a
large convention activity.
Meeting planners are also looking for a large block in as individual hotel
properties as possible, with at least one hotel being sufficiently large to serve as the
headquarters for their event. With 50 percent attributes of the city comes next.
According to latest trends increasing concern is given to security and crime rates in
site selection but general friendliness and attractiveness of the destination is also
important. Way down in 32 percent comes the attractiveness of the convention
centre.
The conclusion is that the facility alone will not create sufficient attraction for
the site. You must have whole package of tourism infra structure to pursue the
economical aspect of tourism convention.
The profits from a convention or conference complex come from renting
hotel sleeping rooms. According to the survey done by Economics Research
Associates, the operational costs of convention centres by themselves are very high.
The only profit for a convention hotel can be gained via the rental of hotel rooms and
the rental of exhibition areas.
Thus the only way to improve the management would be to operate the
facility so as to maximize facility revenues. The way to do is by booking consumer
shows and events which cater to the local market. Promoters of those shows pay
great rent, often in the percentage of the gate. The problem with this strategy is that
there is little or no expansion in the local economy created.

84

5.2 Existing Facilities

Most of the prestigious hotels in Ankara; like Grand Hotel Ankara, Dedeman
and Sheraton date back to 1960s in terms of construction date. The general ballroom
and meeting room configuration of the Hotels here constitute of a large ballroom of
500 to 700 m2 and side meeting rooms varying from 50 to 250 m2. The meeting
rooms generally consist of two meeting rooms of 130-150m2 and generally 4 small
meeting rooms of 50 to 60 m2.
Today The Stad Hotel, The Grand Ankara Hotel and Sheraton Ankara are
going under certain changes to renovate themselves for the convention needs of the
21st Century. The basic lacking property in these hotels is that none of the facilities
contain enough exhibition space for a simultaneous meeting and convention activity.
Most of the educational and medical convention activities require a large exhibition
space, a meeting hall and side meeting rooms to hold simultaneous meeting
activities.
The only large scale convention facilities in Ankara can be listed as the
M.E.T.U. Culture and Convention Centre and The Atatrk Culture and Convention
Centres. These facilities not only stand by themselves but are situated in distance
from the lodging facilities. The Convention activity requires close interrelation with
side meeting activities that are to feed the side facilities of convention activities.
When a convention takes places it brings other sectoral conventions with itself. Thus
side convention facilities are required for a meeting to take place. Normally these
meetings are housed at the ballrooms of the nearby hotel facilities. In this manner the
location of the convention centre is important not only in terms of close access to the
rooms but for close access to the side conventions as well.
The convention market requires the meeting space and the exhibition space to
be located at the same place. Within Ankara case, the only exhibition spaces are in
Atatrk Culture Centre with 3555 m2 and in M.T.A. Association Hall 595 m2 the
other exhibition halls are 300 m2. All the exhibition spaces are only for use of
government activities, which increases the exhibition space demand of the market.
Nowadays, the only functional exhibition space in Ankara can be named as
the Altnpark Expo Centre. This facility which is constructed solely for exhibition
facilities is a long distance from the city centre and quite away from hotels and
commercial activities.
85

5.3 Meeting Trends With Respect to Continents and Space Requirements

of the Convention Market
According to a research held by International Convention Centres Association
(ICCA) in 2003, Turkey hosted 35 large scale international meetings. The research
showed that between the years 1993 and 2004 the total number of meetings that took
palace in the world showed declination. Within these years the most outstanding
factor about Turkey was that the number of attendees per meeting showed
inclination. According to ICCA report, speaking for international meetings, the
number of meetings that were organized in Turkey decreased from 38 to 35 within
the last two years but the number of delegates attending these meetings has
increased. From these statements we can state that; the meeting type and scale of the
conventions are changing from small scale meetings to larger scale ones. The
average attendance number for international meetings is 1412 in 2001.74
ICCA ranks top cities and countries in convention with respect to two main criteria.
One of these criteria is the total number of delegates hosted through the year, and the
total number of international meetings held in that country. So not only the scale but
the intensity of the meetings are important in convention sector. The effect of these
two categorisations over architectural formation must be evaluated to define the
space requirement of convention hotel. The density of the event defines the function
scheme of the meeting rooms. If the conventions are not sufficient in certain periods,
then the meeting rooms and ballrooms are generally preferred to serve for more local
meetings and shows. On the other hand, the market demands for meeting rooms
differ in certain continents with respect to commercial and marketing trends in
certain continents. Depending on the scale of meetings the dimensions and the
number of meeting rooms are considered.
Depending on ICCA 2002 report, it can be stated that America, Europe and
Asia show different characteristics in terms of their meeting scales and attendee
numbers. Turkey can be classified as a dense convention country. Although the
numbers of large scale international meetings are small the attendee number is high.
74

nl Sunay Y., Trkiyenin Kongre ve Toplantlardan Aldg Pay Artyor. (Trkiye Seyahat
Acenteleri Birlii, AR-GE: 2002), Based on National Statistics Institute (DIE) and International
Convention Centres Association 2002 Reports.

86

Among 40 top travel destinations, Turkey is 15th in attendee number and 27th with
respect to total number of meetings.
As a convention location Ankara must be classified under the definition of a
downtown convention location. It remains to be the second largest destination with
its venue capacity and convention hotel capacity. stanbul has 68.652 seating
capacity with 45 halls where as Ankara has only 10 halls with 23549 seating. When
accommodation facilities are compared Ankara has 23 five star hotels and 17 four
star hotels with 5638 and 3070 beds consecutively. The number of 5 star hotels in
stanbul is 262 and four star hotels are 1681.
Unlike Europe, in Turkey 5 star hotels serve 54 percent of the convention
sector where the 4 star hotels share only 18 percent of the total. The advantage of low
cost accommodation is the basic standing point in Turkey. With less accommodation
cost, better incentive venues and services can be supplied.75

Conventions in the World

Convention trends in 2003 show that 57 percent of total convention events
take place in Europe where 17 percent of it takes place in Asia and 10 percent of it
takes place in America. The organizers of these events are generally located in
Europe as well. The major convention organizers are the official convention bureaus
of each city. So in order to attract meetings and association meetings in a
systematically and organized way, the destination city should have an official
convention bureau. In this respect Ankara should organize its own convention
Bureau to reach the meeting potential that it has been loosing for many years as a
capital.
Being the base of the corporate industries America holds the first place for the
association meetings. But after the 11th of September when the Terrorist attacks hit
USA, it lost most of its market share in international market. The European
convention customers started to travel either in their own continent or in Asia.
When the numbers are considered within the European continent, West European
countries have a higher share of the association meetings in Europe. In these
countries both the density of the meetings and the attendee numbers are high. Since
75

Republic of Turkey, Prime Ministry State Institute of Statistics (DIE), February 2004 Tourism
Report; Tourism Statistics Bulletins (DIE: 2004)

87

they hold their meetings in neighbouring countries the travel distance is short and the
accommodation duration is limited to 1 to 2 days. Generally meetings are preferred
to be held in convention centres and hotels are in collaboration with convention
venues. As the lodging duration is short, convention hotels are small scale and
function as integrated parts of the convention halls, being connected with either
bridges or constructed together.
In East European Convention Cities like Denmark, Sweden, Finland and
Portugal the meeting numbers are small but the convention attendance is high. The
convention halls and hotels require large event venues. The meeting rooms in these
countries are generally located at the periphery of the banquet rooms. The meeting
rooms and the corridors in between are separated by removable panels and meeting
spaces and the corridors can be added to the banquet space by removing partitions.
In high meeting number locations like Kopenhagen, Seul, Vienna and Berlin.
the convention halls and meeting rooms are generally separated since the ballroom is
specially reserved for large scale meetings all the time.

Scale of Meetings
According to ICCA 2003 Convention Report the majority of the international
meetings are 250-500 delegate. The percentage of 2000 people conventions are 8
percent. In international meetings the convention hotels are preferred rather than
convention centres. University halls rank third in this list.76
International Conventions last four days if held out of country.

Type of Conventions
When the rate of conventions held from 1993 to 2004 is considered, the
largest ratio is shared by medical conventions. The second rank belongs to scientific
conventions with a ratio of 10 percent. The technology conventions hold the third
place with a ratio of 9 percent. The technological conventions are expected to
decrease in the coming years where as the medical conventions are about to make a
great leap.

76

Obcid, nl Sunay Y.,TURSAB AR-GE 2002

88

In terms of association meetings Ankara has the advantage of being a city of

universities. It holds the forthcoming medical universities and hospitals of Turkey.
Considering the figures of medical meetings, Ankara can accommodate important
meetings in healthcare sector. Apart from these, education and political meetings are
among other meetings categories that the capital holds great potential.
For a projection that is to be made for the coming years an investment that is
done over healthcare meetings would serve other sectors as well. Science and
healthcare meetings require large banquet halls with cine-vision facilities. These
halls can be arranged as ballroom or banquet style if necessary. Unlike conference
halls and auditoriums, the halls have the advantage to be used as an additional exhibit
space and can be used as banquet halls.

The European and American Trends.

When the scale of meetings in Europe are considered; 29 percent of all
meetings took place with 50-249 delegates, 27 percent of it is for 500-999 delegates
and the association meetings that are over 3000 people are only 3 percent of the
whole market.
We can state that Europe equally shares different meeting types, giving
venues for different scales of meetings. So the architectural space configuration of
halls in convention halls and convention hotels are formed with respect to these
needs. In convention hotels the meeting rooms located at sides. In certain occasions
the corridors in between are eliminated where the corridor and the meeting room are
included into the hall.
In Europe convention halls are the most favoured type of venues for large
scale meetings. Moreover, the convention hotels take the second place in convention
meetings.

International Association Meetings

The association meetings are the meetings that are organized by large scale
companies. Mainly the sales department, the human resources and general
management quarters of large companies organize such meetings. According to April
2001 and 2002 recodes mainly Asian market associations tend to organize these
89

kinds of meetings. 73 percent of these meetings are sales oriented which require
exhibit space for product launches and 50-250 people meeting spaces. The space
configurations of sales meetings should be appropriate for parallel meetings where
the meetings are held in certain periods and exhibit space is visited in break-out
periods. The meeting spaces are generally located in different but consecutive floors
if the circulation space is included to the exhibit space. The main idea is to maintain
the visual continuation of the convention facility and supply the forced flow between
the concourse, exhibit, pre-function and meeting spaces.
The second place in company meetings are education and meeting based.
Although small in percentage, this number is expected to increase in the coming
years by ICCA. The space requirements of these meetings are generally in the form
of conference centre or auditoriums. In Europe, due to increasing trends most
convention centres provide an auditorium or conference centre as well as large span
column free ballrooms.
Hong Kong takes the first place in company meetings where Germany,
England and Holland follow it consecutively.
Speaking locally, within each country 51 percent of companies prefer venues
that are located in their own countries. According to ICCA research 52.75 percent of
all meetings were shared among first 10 countries in 1999. But in 2000 this number
dropped to 15.95 percent. After the 11th September Terrorist attacks U.S.A. lost most
of the international conventions. The European conventions that were to be arranged
in U.S.A are shared by local European countries.

Future Trends
With respect to surveys most of meetings are under 1000 people meetings.
But ICCA indicates that the meetings for 1000 delegates are showing increase. In the
past two years the numbers of total meetings have decreased.77 Among these
conventions teleconferencing is becoming more and more popular. This means that
in the future, the amount of international conventions will be limited to local,
continental conventions. The meeting durations will be shorter but will be done with
a larger attendance due to usage of video conferencing techniques.

77

Ibid, nl Sunay Y.,TURSAB AR-GE 2002

90

Convention Trends in Turkey

In out of season activities; incentive meetings and wellness are among the
most favoured facilities in Turkey. The tourist profiles that visit Turkey have an
income level of min 2500 dollar/month for 25.3

percent of visitors. The 27.3

percent of visitors have an income level between 1000-2500 dollar/month. This

means that either in convention or other venues; the tourist profile in Turkey has the
potential to afford five and four star accommodation facilities. Due to the corporate
image of conventions a convention hotel may have at least four stars. According to a
survey done among convention organizers by ICCA in 2002; most of the visitors
show low cost accommodation as a top priority in their destination choice list.
Turkey has the capacity to offer high quality service and venues with lowest price
available.
Research of Ministry State Institute of Statistics (DIE) show that 25 percent
of visitors come to Turkey due to low prices-high quality service, 10 percent visit to
understand and learn more about Turkish culture and 15 percent come for shopping
with low prices.78

Economical Affect of Convention Investments

Each year 75 billion people travel around the world for convention activities.
Turkey takes 2 percent of this share having a tourism income of 300 billion dollar. A
convention delegate can spend 4.5 times more than a recreation oriented tourist.
Moreover the planning and organisation period of a convention is longer than any
other tourist activity. The conventions in this respect are harder to be cancelled. For
this reason convention activities have a more rooted and strong impact on
economy.79
Turkey has built its tourism profile over holiday season tourism activities.
Yet, for tourism organizations; to increase our share and create new income sources
number of venues for other tourism sectors must be increased as well. Simply
78

Republic of Turkey, Prime Ministry State Institute of Statistics (DIE), February 2004 Tourism
Report; Tourism Statistics Bulletins (DIE: 2004)
79
Boyce Handan Gen. Man., stanbul Conevtnion Visitors Bureau (Torism Gazeteci ve Yazarlar
Dernegi Blteni), 12.01.2004

91

summer tourism wouldnt be enough to supply the necessary surplus and job
opportunities if the tourism is to be improved.. Sustainable tourism activities such as
convention, golf and spa tourism ensure a back-up for economical crisiss that take
place in summer tourism.
According to Municipality of Culture and Tourism, each year 750 000 people
visit Turkey in order to attend convention facilities. Around 70 percent of this group
is accommodated in Aegean and Southern shores. The basic handicap of these resorts
is the seasonal potential is limited to 3 to 4 months. A more sustainable and
permanent tourist potential can only held by downtown or suburban activities that
will last a larger seasonal duration.

Future Trends in Convention Hotels

In 2003, The benchmark Resorts, Hotels and Conference Centres Company
was chosen to be the pioneer of convention industry by ICCA. The research prepared
by this group defines the future of the convention facility as technology and
strategy. The convention customer requires more technology oriented convention
venues and strategically more oriented convention destinations. In other words,
simply the construction of a convention hotel is not enough. There must be a
government policy to support the investments for meeting venues. stanbul
Convention and Culture Centre can be defined as an example for a meeting oriented
strategy. The Stlce Renovation Project has begun a renovation project that
changed the face of golden horn. The historic quarters in Stlce are now being
renovated. Apart from these Ko and stanbul City municipality has initialized a
series of museum projects like Miniaturk and Ko Museum to attract more tourists
around stanbul. Not only the convention event but also the surrounding fabric has
become an attraction show case.
The company strategies become more important than the subjects that are
discussed in company meetings. The meetings have moved to more virtual
environments withinternet connections and video conferencing techniques.
High cost conventions are not favourable.

92

5.4 Meeting Trends With Respect to Continents and Space Requirements

of National Convention Market
The convention market in world requests at least four star hotels for
accommodation. The basic advantage of Ankara is the low cost and fine service
quality of its hotels. Five star service can be given within a lower cost range. The
biggest competition in convention industry is the organisation of unification of hotel
facilities and venues bringing meeting and convention potentials together. The
downtown hotel facilities need to be organised to hold a big convention
simultaneously at the different hotels.
Among the conventions; half of the delegates attend from outside the city.
The convention demand reaches 30-40 meetings per year for Ankara. Ankara has 30
percent of Turkeys total convention needs. The event organizers of these events are
medical meetings, governmental and political meetings that constitute of around 800
people. The demand for meetings are caused due to location of universities, health
organisations, foundations, chambers, community organisations and political
parties.80
As Sheraton and Hilton Banquet managers state, although there is a market
need for 1500 people, there is no such space in Ankara city centre to overcome this
demand.
The existing hotel facilities are 60 percent full normally this number increases
in meeting and convention periods. The convention season lasts for 9 moths. The
season starts in September and continues until mid June. 81
The demand for small scale meeting rooms is high, the rooms are used by
weddings, political organisations, company and private sector meetings. The
banquets are full 70-80 percent throughout the year serving for different sectors in
different periods. The use groups for small meeting rooms of 40-80 m2 are family
meals, company organisations, rotary meetings, community organisations and
foundations. The banquets are fully used through spring and summer for weddings.

80

Interview with Ugur Grer, Sales Manager for Banquet and Meeting Facilities, Sheraton Ankara,
(ankaya: Ankara), 05.03.2004
81
Ibid

93

While the density of graduation meals and parties increase along summer period as
well.82
The basic gap in recreational sector is the variety of entertainment spaces and
organisations. There is no variety in the function range while an increase in the
number of show cases an brand pubs are increasing. The common approach in hotel
investors is that unification of shopping malls, sports centres and cinemas under the
roof of business hotels. The space properties of the convention hotel allows for
hosting of showcases, mid scale concerts and parties moreover, casino floors can be
added to the function schema. The space requirement of the city for show cases and
entertainment events will be supplied by the help of convention venues.

5.5 Existing Situation and the Venue Need in Ankara

The research for the convention need in Ankara showed that the convention
capacity of Ankara can hold a convention of maximum 700 people at once. The
majority of the conventions are turned down due to lack of necessary meeting spaces
in convention hotels. Convention Hotels are preferred when compared to convention
centres since the meetings generally take place 3 to 4 days in continuous sessions and
delegates have the chance to pay a visit to downtown attraction sites at the end of the
conventions. This gives the ease to quick access to hotel rooms after meetings. 83
The conventions held in Ankara. are medical, educational, military and
political respectively. When exhibit needs are considered educational, medical and
trade shows require the most venues. These are international meetings. The demand
on small scale rooms like 40.60 and 80 m2 is high, in other words the they are fully
occupied throughout the season. The banquet halls are used by the universities and
schools for graduate ceremonies in summer and for company meals in Ramadan
Month for a month. The family meals and wedding meals are organized at weekends
which occupies the banquet halls in the weekends.

82

Obcid, interview with zaygen Asl, HiltonSA

Author, interview with zaygen Asl, Conference and Banquet Sales Executive, Ankara HiltonSA,
(ankaya:Ankara) 05.03.2004.
Author, interview with Ugur Grer, Sales Manager for Banquet and Meeting Facilities, Sheraton
Ankara, (ankaya: Ankara), 05.03.2004
For detailed information please refer to Appendix A, List of Hotel and Meeting Room Capacities in
Ankara.
83

94

The area requirements of organizers generally constitute of a minimum of 400

people banquet hall and 500 m2 meeting space (theatre style). A meeting session
requires side facilities, meeting rooms and readily furnished banquet hall of 600 m2
including the stage configuration. All in all, a banquet hall divided into two can serve
for a single meeting group due to noise problems. Half of the room is used for the
meeting while the other half is kept ready for the next session which is generally the
banquet event. In company organizations, side meetings as plenary sessions are held
in 40 m2 rooms for high priority meetings. These are simultaneous meetings held by
top executive managers.
For trade shows a hall of 700 people is required making up a hall of 1850 m2
column free space. The exhibitors require foyer and ballroom space and combination
of these are favourable if possible.
The conventions in Ankara take place in 3-4 day continuous sessions. The
first day starts with arrival in the evening and the sessions continue through all day
long. The lunches are eaten in foyer space as luncheons and snacks. There is not a
specific space definition done for this activity yet.
The conventions turned down due to lack of space require halls for 10001500 people which makes a space for 1500 m2.84 The problem is that a system is not
set in Ankara in terms of situation and location of hotels and convention facilities to
house a convention of 1000 people. The convention hotel must house a hall of
minimum 1500 people and its subsidiary spaces. The hotels must be located in close
proximity to assure parallel conventions that take place in side hotels.
The customer profile of convention delegates of Ankara have high income
level. They prefer to stay in five star hotels by 80 percent and prefer business room
layout.
The convention season in Ankara lasts for ten months. The season starts in
September and ends in June. The conventions generally move to southern season in
summer period.

Ibid, Ugur Grer, Sheraton Ankara and zaygen Asl from HiltonSA Ankara

95

Facility Needs in Ankara

Many meeting planners state that the convention hotel has to be a one stand
shop in itself that will serve both the city and itself. The basic decision in design is
the organisation of recreational facilities in Ankara.
Within the year 2003 and 2004 many entertainment centres have opened in
the city which are today held in temporary shelters. This shows an emerging sector in
Ankara that hasnt found its location due to the growing nature of the city. These
facilities are concentrated along the northern band of the Ankara- Eskisehir Road.
Located on a disorganized structure, these facilities will get more concentrated and
planned as the new infrastructure developments are finished and the development
pattern of city becomes legitimate.
Concentrating many activities within and having the necessary venues for any
public event, the convention hotel will define the organization of these functions.
The hotel has common use groups with entertainment centres and combination of
these functions will give successful results both for the needs of the hotel and the
long term demands of Ankara.
Locating a casino floor and entertainment halls in hotel will enhance the
recreation palette of the city.

The Eskiehir Road and the New-Third Axis of The City

The potential site for a convention hotel is the northern border of Eskiehir
Road. The hub of Konya and Eskiehir Roads is the third junction point that connects
the main transport axiss. The proximity of three main university campuses, Military
and Governmental buildings requires the need for a convention facility. The hotel
will be accompanies by the convention halls of universities. In a city where around
60 percent of the conventions are arranged in these markets, the hotel will be easily
fed. The entertainment centres of the city are growing on these sites which are
situated in a disorganized way at the moment. The construction of the subway system
will connect the hotel to the city. The major problem of this site is that there will be
no hotel facilities to support the hotel if a large convention is to be held.

96

As a fast growing district the site will be managed easily while the hotel is
being formed by the site references, it will be able to modify the surrounding
environment.

5.7 Competition for Convention Market in Ankara

Within the convention market needs of Ankara, the convention and exhibit
organizers require minimum of 1500 m2 of exhibit hall and 700m2 of banquet space
that can be organized for meeting events. The customer profile of events request five
star accommodation and quality service. The prestigious location is the third most
favoured factor in hotel choice.
The Sheraton, Hilton and Ankara Dedeman Hotels are the most favoured
hotels of this group respectively. These hotels hold the convention market of stanbul
in hand. The venue sizes and proximity other five star brand hotels give the
possibility to overcome the needs of the organisations.
No single facility in Ankara can house an event that requires 1500 m2 of
exhibit space and 1000m2 of column free meeting space.

5.8 Catchment Areas of Ankara

Ankara first appears in historical records in 1200 B.C. when it was captured
by the Hittites. Since then the city has been in the centre of different trade routes.
Once connecting the trade routes, Ankara is now connecting networks of information
and commercial and political activities of Turkey.
From the early periods of construction of republican History until today
Ankara has housed the events that caused the construction of a new civilization.
Atatrks Mausoleum, Ethnographical Museum, State Opera House and
Ballet House are among the important sites of the city. Bosgazkoy (Hittite Capital),
Gordion (Phyrigian Capital) and Capadocia are among the historical landmarks that
define the history of different nations in the lifetime of the city.
Spa is among the recreational facilities of Ankara. Daily trips are organised to
Kzlcahamam, Beypazar region.

97

Ankara has a variety of Amenities that can serve the recreational needs of
meeting organisations. These are utilized within daily trips organized during
convention periods.
The Historical site of Ulus, citadel, Roman Bath, Middle East Technical University
and Bilkent Cyber parks, the government associations, educational and military
maintain the meeting potential and serve for the convention requirements of the
commercial and business industry.

98

CHAPTER 6

A CONVENTION HOTEL PROPOSAL FOR ANKARA CASE

6.1 The Site Analysis of the Selected Location Based on Feasibility Study
According to the feasibility research it can be stated that Ankara requires a
convention hotel of 500 keys and a venue capacity of 1200 m2 of banquet space and
1500 m2 exhibit space. A hotel facility of this size requires a minimum of 12000 m2
floor area at ground floor.
Due to nature of convention hotels, the basic criteria for the location of the facility
are fulfilment of the space need of the program, close proximity to city centre, ease
of access to transport means, proximity to means of convention sources and
closeness to historic and recreational sites of the city.
The possible sites that fulfil these qualities are namely the central locations in
Ankara which are Kzlay, Ulus, Tunal Hilmi and ankaya Districts. Although these
locations are perfect in local means, the necessary site area requirements cant be met
due to high density settlement and lack of space.
The structural growth of Ankara is basically guided through a cross axis system. The
ankaya- Ulus highway forms the vertical axis while the longitudinal axis mitkyKzlay cuts this arm on a horizontal axis. The end points and the intersection of each
axis creates a focal point. The formation of Ankara city structure resembles the
connection of nodes and webs. The different central locations of different characters
are woven around certain nodal points. As the nodes have filled their potential and
can no longer carry the load , the web is supposed to grow along the west axis which
is in mitky direction.
The fourth node that is about to be formed is the Konya-Samsun Highway
and mitky axis. This junction has become the second dominant transportation hub
since the light rail system and Ankara subway system have carried their second
transfer station to this site. Not only the subway but the main bus terminal of Ankara
is situated on this hub. These transportation networks not only connect this site to
other focal points of the city but also to suburban recreational and historic sites like
99

Glba and Ulus and mitky. Since there is not enough space in existing centres,
the convention hotel has to be located in an emerging centre where it can find space
for the future growth and help the shaping of the settlement.
The possible location for the site is between two main junction points on
Eskisehir Road. The site bounded by Sogutozu- Balgat Road and Konya-Samsun
Highway is evaluated to be the possible location for a convention Hotel.
Two alternative sites are analyzed through research process in this location.
One being opposite to the Ankara chamber of Commerce on the south side of the
Eskisehir axis. The second site is again on the south side of the same road where as
located adjacent to the Traffic Hospital. The prior is 8500 m2 in base area and is
eliminated due to restricted traffic access conditions.

Site Characteristics
The chosen site is 14.000 m2 in base area and is located at the junction of
two major lanes connecting Balgat District to the newly growing Sogutozu
Commercial zone. The lot is mainly triangular in form and has direct borders to
Eskisehir and Balgat Roads. The third border of the site is facing a secondary road
which by-passes into Eskisehir road in front of Armada Shopping mall.
The access conditions of site is in optimum condition where the major bus terminal
of Capital City is two kilometres in distance. Moreover other bus stations of private
entrepreneurs Varan and Ulusoy Bus Stations are right across the street.
The second phase of subway and light railway system Ankaray have
located their transit station ob the highway border of the site. These stations will
connect the site to Ankara and minimize the travel distance to twenty minutes. Direct
connections to Ulus, Kzlay, Yznc Yl and Eryaman districts will be available
where the commercial, governmental and office districts are accessible.
The second advantage of the site is that it is located in close proximity to
Armada Shopping Mall and the newly forming entertainment and recreational sites
around Atatrk Forestry and Farming Site (A.O..). The convention hotel is
expected to serve for the venue needs of the location by its banquet halls and exhibit
spaces.
In Ankara Case, the convention hotel does not simply stand serve business
men but also for other visitors as well. The Armada site houses a group of hospitals
100

of different specializations. The Private Bayndr Hospital, Womens Diseases

Hospital, Traffic Hospital and Gazi University Hospital are among the occupants of
the site. Thus, the user profile of the hotel

will also include patients, their

accompanies and the foreign visitors of those hospitals. Hotel , in this respect, will
serve as the residential section of a hospital campus.
The physical location of the site sets the hotel in equal distance to all the
activity centres in Ankara including the major sources of convention organizers. The
main lanes which are connected directly to Ulus Culture and Convention Centre, the
historic site of Ulus and Glba recreational sites. On the other hand, Eskisehir lane
gives direct connection to ankaya and Kzlay locations.
When the basic venue sources are considered in scope of Ankara case;
medical sectors, military and governmental sectors share the first place. The political
parties and engineering conventions as well as product launches and commercial
exhibitions follow the second place in meeting industry. In terms of local proximity,
the governmental buildings situated along the Kzlay direction and political party
buildings that are constructed along the Konya Highway

give ease of access.

Moreover, the Middle East Technical University, Hacettepe University, ankaya

University and Bilkent Universities will be able to use the hotel for educational and
engineering conventions. The hotel in this respect

is expected to create a

technological exhibit platform where these universities can share scientific

background with Turkey.

6.2 Detailed Description of The Facility Program

According to the feasibility study based on the national and International
trends in Convention industry the following markets requirements are evaluated for a
convention hotel that is to be constructed in Ankara.
The hotel is expected to be a self sufficient entity even when merely the
national market is considered. The venues are designed to fulfil the needs of not
only the convention industry but of the city as well. The building is expected to be a
remedy for the secluded lifestyle of

Ankara and hence the entertainment and

recreational life within the city. In these terms, the lacking space needs and functions
like casinos and event spaces for exhibits, show events and banquet spaces are
integrated into the hotel. The construction base area of
101

the facility is kept in

minimum increasing the floor levels. The spared site is designed as a botanical
garden as the fauna of Anatolia, Middle East are brought together.85

Design Decisions
Located on the main highway of Ankara the site needs to be isolated on the
northern and western borders. The botanical garden that is designed linearly around
those borders assure both the visual and sound insulation that is required.
Due to structural restrictions of large span convention venues the hotel masses
and banquet halls are separated from each other. The convention podium extends into
the botanical garden where it represents itself visually to the trespassing viewers. The
floors of the convention block makes maximum use of the exterior terraces where
different levels of botanical garden can be used as exhibit terraces and exterior
meeting rooms.
The massive formation of the hotel is designed to break the sequence of
vertical buildings that are aligned along the Eskisehir Road. The building creates a
triangular silhouette which decreases in elevation in 3 directions. These directions
are Kzlay- mitkoy axis, Soutz Balgat axis and Armada-Balgat axiss. By this
way the visual links created by open spaces in those axiss are emphasized by the
hotel located at junction point.

The Sun
The triangular massive formation makes maximum use of the sun. Horizontal
shadings are utilized at the southern facade where as the harsh effect of west and east
light is filtered by vertical shadings.

The View
The building is basically dominated by the three roads that surround the site.
The massing of the block is directed towards the green landscape of A.O. and

85

For detailed information on building program refer to Appendix C.

102

cityscape at Kzlay direction. On the other hand, the southern and western facades
make use of the ankaya district and M.T.A and M.E.T.U gardens.

Site Access and Orientation

The priority of the Balgat-Stz road is emphasized by the construction
of A.T.O. Convention Centre. The A.T.O junction increases its value and emphasis
on city infrastructure when compared to Konya and Eskiehir junction. In order to
vitalize this generation and maintain the connection with the convention centre the
hotel complex is set back on the western border. The major access to convention
facilities are maintained via the western border of the site.
The location of the A.T.O. Convention Centre, Armada Shopping Mall and
metro station on the southern section of Eskiehir Road are the major influencing
factors in the orientation of the hotel and determination of major entrances. The
pedestrian access is maintained on the eastern faade where direct visual connection
is possible with Armada Shopping Mall. The pedestrians connection with the metro
station is also maintained by this way. The hotel entrance is given on the southern
border of the site where a safer traffic access would be possible.
The customer access on different directions not only serve for different user
groups but makes maximum use of the level differences on site. The entrances are by
level differences which assures easy control and direction of the user.

Design Concept
The basic approach in the design of the hotel was to search through the
possibilities of variations within a restricted urban site. The variations of public
private use are experienced in design phase. The aim of the design was to reflect the
variations of public and private spaces in sections as well as plans.

Site Characteristics
The site utilizes a sloped character that ascend from east to west directions.
In order to make maximum use of the slope two entrances are supplied into the
building at 0.00 and +8.00 levels. The first entrance is directly connected to Balgat
103

road and used for public access to convention and exhibit halls at ground floor. The
+8.00 level entrance is utilized as the main entrance for hotel visitors.
The public spaces and meeting rooms are designed to make maximum use of
the sunlight. Horizontal shadings are utilised at southern facades where as vertical
shadings are preferred to block the harsh effect of eastern and western light. A third
entrance at 16.00 level is visually linked to subway station and allows the pedestrian
entrance.
The spatial structure of the building is constructed on the idea that the
building has to perform both the identity of a public building and private residential
identity of the guest floors. The degradation of privacy is expressed both in public
floors and guestroom floors. The building is vertically divided in to secondary and
thirtiary atriums. As the level increases the user groups of the elevated atriums are
also separated in the mean time grouped among each other. The secondary atrium
houses an executive meeting room and the third and highest atrium serves as the
express reception for the V.I.P. visitors which are accessed by a private elevator from
the garage level.
The convention activity literally means the sharing and marketing of ideas
under one roof. This basic idea is taken to be the main concept within the building.
Therefore the exhibit halls, banquet halls and the meeting rooms are gathered around
an atrium space where both the integration of delegates are assured and the prefunction spaces are overlapped.
The main venue rooms are located in layers sharing the same service cores
that are solved at the corners of the block. The access to each floor is supplied by
escalators. The aim of locating meeting venues in different layers is to separate
different user groups if different organisations are to take place in the hotel. The
flexibility is also maintained within the building

by vertical connections both

visually and physically.

The hotel is accompanied by 4 different restaurants that make use of the
views in 4 different directions and levels. The public restaurants are located on
eastern and western sides of the building. The hotel guestroom mass is finished by a
roof top restaurant and bar which makes maximum use of the view of Ankara, the
gardens of M.T.A. and M.E.T.U.
The podium and the guest floors of the hotel are separated from each other
by a hospitality floor. These rooms are specially designed four bay suites that serve
104

the executive managers during luncheon sessions. The suites are equipped by a
bedroom, two living bays and a cocktail bay where meetings and private meals can
be given. Since these rooms are specialized rooms to serve just for convention
facility they have the risk of being free on out of season terms. The division of these
suites are supplied in order to convert these four bay suites to two bay suites so that
they can be used as guest rooms.

Expectations on Future Growth of The Site

It can be said that the settlement zones in Eskisehir road are defined and
limited by junction points. When the characteristic sequence of

the zones are

analyzed through West East direction, it is seen that the housing stock is blocked by
a line of governmental settlements. This segregation is broken in Armada junction
where the governmental buildings are replaced with healthcare and commercial
functions. On the other hand, the southern section of the site is part of a new
residential stock that has gained velocity in the last few years. A hotel building is
expected to bring diversity in terms of mix of uses. It is by the help of this diversity
that different user groups are expected to be involved within the site.
The future growth of the site is expected to be an entertainment centre in
character which Ankara as a capital has been striving for a long time to gain its
vivacity. Increasing night life and investments on entertainment centres prove the
direction of growth in Ankara.
The major handicap of the site is that the continuity of the pedestrian flow is
blocked by the rapid transition of the highway. Although the subway passages and
pedestrian bridges try to connect two sides of the road, the necessary connection is
not supplied for continuity.
Although the existing identity of the site represents a residential character,
this is expected to be transformed into commercial and office zones in a near time.
The hotel mass with its surrounding structure is expected to be read as the modern
and changing face of capital as it is perceived from the entrance of the city.

105

Fig 6.1 National and international airtransport routes.

106

Fig 6.2 Framework of transport lanes for Ankara.

107

108
Fig 6.3 Framework of subway and lightrail systems in Ankara.

Fig 6.4 Zones of settlement for Konya-Eskiehir junction (West Corridor).

109

Fig 6.5 Main attraction points of site.

110

Fig 6.6 Design strategy; design decisions on access, orientation and connection .

111

Fig 6.7 Reference sheet for site photos.

112

Fig 6.8 View from Eskisehir Road (Pic 1)

Fig 6.9 View from Balgat Road (Pic 2)

Fig 6.10 View of Site From ATO (Ankara Chamber of Commerce) (Pic 3-4)

113

Fig 6.11 Site Plan

114

Fig 6.12. 0.00 level floor plan.

115

Fig 6.13. +4.00 level floor plan.

116

Fig 6.14. +8.00 level floor plan.

117

Fig 6.15. +16.00 level floor plan.

118

Fig 6.16. +20.00 level floor plan.

119

Fig 6.18. Guest floors

120

Fig 6.19. Section A-A

121

Fig 6.20. North elevation.

122

Fig 6.21. South elevation.

123

Fig 6.22. South elevation.

124

Fig 6.23. Views from 1/500 Model

125

APPENDIX A: EXISTING HOTEL CAPACITY OF ANKARA

HOTEL CAPACITY
CONGRESS HALL
ROOM
CAPACITY(lodging) NUMBER CAPACITY

HOTEL ADDRESS

KENT HOTEL
Cad 4.Yeniehir

171

256

SEASON

TECHNICAL FACILITIES

300
30

150
25

Whole Year

Slide machine, overhead

projector, Video,TV,sound
system

350
50

100
15

Whole Year

Slide machine, overhead

projector, Video,TV,sound
system,tape player

60
20

60
20

Whole Year

all technical facilities

Slide machine, overhead
projector, Video,TV,Flip
Chart

Mithatpaa

MERIT ALTINEL HOTEL

Tandoan Blv 151

EXHIBITION HALL
NUMBER CAPACITY

600
SHERATON HOTEL
St. Kavakl dere

Noktal

stiklal

STAD HOTEL
St. 20 Ulus

225

401

ANKARA BEST HOTEL

Atatrk Blvd.195

60

ANKARA DEDEMAN HOTEL

Akay- Bklm st. 1

BEST APART HOTEL

Mumcu st. 71 G.O.P

291

436

20

Whole Year

Whole Year

300
850
500
450
300

75

Whole Year

all technical facilities

Slide Machine, overhead
projector, video,TV,sound
system,simulataneous
translation system

500
500

Whole Year

set sound system, projection

machine

10
(3)
20

200

all technical facilities Slide

machine, TV, sound system,
projection curtain
Slide machine ,TV, sound
system, projection curtain,
overhead projector, sine
Whole Year
vision

Film and slide machine ,TV,

sound system, projection
curtain, overhead projector,
Whole Year
sinevision system

Uur

BLKENT HOTEL
Lodumlu Bilkent

100

200

10-20
1020
35-40
(6 adet)
150

GRAND HOTEL ANKARA Atatrk

Blvd.183

193

396

600
80

750
450
90

GRAND SRMEL HOTEL

Cihan st 6 Shhiye

205

310

350
45
25

600
250
170
150
130
HILTON HOTEL
st. 12 Kavakldere

KALE HOTEL
Blvd 89 Maltepe

Tahran

60
323

486

50

500-450
250-200
150

G.M.K

BYKHANLI PARK HOTEL

110

165

60

Whole Year

Slide machine, overhead

projector, video,TV,sound
system,flipchart, projection
system, projector, spotlight ,
Whole Year
tape player
sound system,
curtain,T.V.,video, slide
machine, overhead
Whole Year
projector

Whole Year

APPENDIX B: CONTINENTAL CONVENTION TRENDS

African trends 1997-2001

600

Meetings

500
400
300
200
100
0
1997

1998

1999

2000

2001

Benin
Burkina Faso
Uganda
Algeria
Ghana
Cte d'Ivoire
Tunisia
Nigeria
Senegal
Cameroon
Kenya
Tanzania
Morocco
Egypt
South Africa
Others

American trends 1997-2001

El Salvador
Dominican Rep
Bolivia
Trinidad-Tobago
Venezuela
Puerto Rico
Peru
Panama
Guatemala
Costa Rica
Ecuador
Uruguay
Colombia
Chile
Cuba
Mexico
Argentina
Brazil
Canada
USA
Others

2500

Meetings

2000

1500

1000

500

0
1997

1998

1999

2000

2001

Asian trends 1997-2001

1400

Nepal
Vietnam
Syria
Jordan
Saudi Arabia
UAE
Lebanon
Philippines
Indonesia
Taiwan
Israel
Malaysia
Thailand
India
Singapore
Korea Rep
China & HK
Japan
Others

1200

1000

Meetings

800

600

400

200

0
1997

1998

1999

2000

2001

APPENDIX B: CONTINENTAL CONVENTION TRENDS

Australasia / Pacific trends 1997-2001

500

Meetings

400
300
200

New Zealand

100

Australia
Others

0
1997

1998

1999

2000

2001

European trends 1997-2001

6000
Bulgaria
Slovenia
Croatia
Ireland
Turkey
Czech Rep
Russia
Hungary
Poland
Norway
Greece
Portugal
Denmark
Finland
Sweden
Austria
Switzerland
Netherlands
Belgium
Spain
Italy
Germany
France
UK
Other

5000

Meetings

4000

3000

2000

1000

1997

1998

1999

2000

2001

Continental trends 1997-2001

100%
Africa
Percentage of world

80%
America
Australasia/
Pacific
Asia

60%

40%

Europe

20%

0%
1997

1998

Union of International Associations [email protected]

1999

2000

2001

APPENDIX C: BUILDING PROGRAM FOR 500 ROOM

CONVENTION HOTEL

Guest Room Distribution In Total

King Room =

220

Double Double=

280

Junior Suite=

10

Hospitality Suite=

Conference Suite=

Executive Suite=

Presidential Suite

Total=

500 Keys

Guest Rooms

477 Guest Rooms

1 Bay

32 M2...................................15264 M2

3 Guest Room For

1 Bay

32 M2.........................................96 M2

10 Junior Suite

2 Bay

48 M2.......................................480 M2

4 Hospitality Suite

4 Bay

128 M2.......................................512 M2

4 Conference Suite

3 Bay

96 M2.......................................384 M2

1 Executive Suite

5 Bay

160M2.......................................160 M2

1 Presidential Suite

6 Bay

192m2........................................192 M2

Handicapped

Total

17088 M2

130

Public Areas
Lobby....................................................................................................... 600 M2
Bellman Station And Luggage Storage........................................................80 M2

Food And Beverage................................................................................1560 M2

Coffee Shop ...............................................................................................350 M2
Main Restaurant.........................................................................................600 M2
Specialty Restaurant...................................................................................220 M2
Cocktail Lounge.........................................................................................220 M2
Lobby Bar..................................................................................................170 M2

Retail Area................................................................................................455 M2
Newstand/BookStore....................................................................................50M2
Giftshop........................................................................................................75 M2
Travel Agent............................................................................................... 35 M2
Car Rental....................................................................................................25 M2
Barber /Beauty Shop....................................................................................50 M2
Florist...........................................................................................................20 M2
Bank

......................................................................................................25 M2

Specialty Shops............................................................................................75 M2
Mens And Womens Wear.......................................................................100 M2

Convention Facilities.............................................................................4180 M2
Ballroom.....................................................................................................800 M2
Ballroom Foyer..........................................................................................320 M2
Banquet Hall............................................................................................1200 M2
Banquet Hall Foyer....................................................................................480 M2
Exhibit Hall..............................................................................................1500 M2
Meeting Rooms (6 Rooms )...................................................................... 420 M2
Business Centre..........................................................................................200 M2
Storage.......................................................................................................180 M2
Subsidiary Rooms (Cloak Room, Toilets ).................................................80 M2
131

Administration........................................................................................847 M2

Front Desk And Front Office..................................................................250 M2

Reception....................................................................................................25 M2
Security Office.............................................................................................20 M2
Asst. Manager............................................................................................. 20 M2
Director Of Rooms......................................................................................20 M2
Reservation Manager...................................................................................25 M2
Phone Operator............................................................................................20 M2
Fire Control Room.......................................................................................12 M2
Safe Deposit Area........................................................................................10 M2
Counting Room............................................................................................20 M2
Work Area And Mail...................................................................................15 M2
Subsidiary Rooms S (Toilet, Storage).........................................................20 M2
Ups Room....................................................................................................15 M2

Executive ..................................................................................................135 M2
Reception.....................................................................................................15 M2
General Manager..........................................................................................15 M2
Executive Assistant Manager.......................................................................15 M2
Food And Beverage Manager .....................................................................15 M2
Secretary.......................................................................................................10 M2
Conference Room....................................................................................... 25 M2
Subsidiary Rooms (Toilet ,Storage, Copying).............................................40 M2
Ups...............................................................................................................20 M2

Accounting Office....................................................................................210 M2
Reception.....................................................................................................20 M2
Controller.....................................................................................................20 M2
Assistant Controller......................................................................................20 M2
Casher...........................................................................................................20 M2
132

Payroll Manager ..........................................................................................20 M2

Accounting Work Area................................................................................25 M2
Computer Room ..........................................................................................15 M2
Secretary.......................................................................................................15 M2
Subsidiary Rooms /Toilet ,Storage, Copying)...........................................40 M2
Ups...............................................................................................................15 M2

Sales And Catering Offices....................................................................225 M2

Reception.................................................................................................... 15 M2
Director Of Sales..........................................................................................15 M2
Sales Representatives.................................................................................. 20 M2
Director Of Public Relation.........................................................................15 M2
Catering Manager.........................................................................................15 M2
Banquet Manager.........................................................................................20 M2
Banquet Reprsentatives.............................................................................20 M2
Convention Service Manager.......................................................................20 M2
Function Book Room...................................................................................15 M2
Secretary.......................................................................................................15 M2
Subsidiary Rooms (Toilets , Storage, Copying)........................................40 M2
Ups...............................................................................................................15 M2

Service.....................................................................................................4500 M2

Food Preparation...................................................................................1150 M2
Main Kitchen..............................................................................................950 M2
Preparation Area........................................................................................270 M2
Butcher Shop................................................................................................30 M2
Bake Shop................................................................................................... 65 M2
Vegetable Preparation Area.........................................................................75 M2
Meat Preparation..........................................................................................50 M2
Salad And Desert Preparation Area.............................................................50 M2
Cooking Area.............................................................................................150 M2
Main Cooking............................................................................................100 M2
Short Order Cooking...................................................................................50 M2
133

Sanitation..................................................................................................250 M2
Dish Washing.............................................................................................100 M2
Pot washing................................................................................................100 M2
Garbage And Trash Removal.......................................................................50 M2

Serving Area.............................................................................................180 M2
Restaurant Pickup........................................................................................75 M2
Banquet Pick Up..........................................................................................75 M2
Room Service Area.....................................................................................30 M2

Subsidiary Rooms....................................................................................100 M2
Chefs Room...............................................................................................10 M2
Service Bar...................................................................................................30 M2
Staff Toilets..................................................................................................60 M2

Food And Beverage Storage....................................................................660 M2

Dry Food Storage........................................................................................60 M2
Refrigerated Food Storage...........................................................................50 M2
Frozen Food Storage...................................................................................20 M2
Beverage Storage.........................................................................................30 M2
Refrigerated Beverage Storage....................................................................10 M2
Non-food Storage.........................................................................................30 M2
Receiving Storage......................................................................................80 M2
Receiving-Trash.........................................................................................200 M2
General Storage..........................................................................................180 M2

Employee Area ........................................................................................515 M2

Personnel Offices.........................................................................................90 M2
Security........................................................................................................15 M2
Employee Lockers..................................................................................... 300 M2
Employee Dining.......................................................................................110 M2
Employee Manager......................................................................................20 M2
134

Laundry And House Keeping.................................................................550 M2

Laundry....................................................................................................350 M2
Valet............................................................................................................40 M2
Laundry Manager.........................................................................................10 M2
Supply Storage............................................................................................ 50 M2
Laundry..................................................................................................... 200 M2
Linen Storage.............................................................................................. 50 M2

House Keeping..........................................................................................200 M2
Lost and Found.............................................................................................10 M2
Asst. House Keeper...................................................................................100 M2
Equipment Storage......................................................................................30 M2
Linen Storage...............................................................................................50 M2

Engineering And Mechanical...............................................................1050 M2

Mechanical And H.V.A.C........................................................................775 M2

Mechanical.................................................................................................350 M2
Boiler..........................................................................................................100 M2
Pump............................................................................................................75 M2
Transformer................................................................................................100 M2
Emergency Generator............................................................................... 150 M2
Engineering Offices And Repair Shops.................................................275 M2

Recreation.................................................................................................730 M2
Closed Swimming Pool And Deck............................................................300 M2
Health Club................................................................................................200 M2
Exercise Room.......................................................................................... 100 M2
Sauna..........................................................................................................100 M2
Racquetball (2)............................................................................................ 60 M2
Shower And Toilets.................................................................................... 40 M2
135

Healthcare (Doctor And Nurse)...................................................................30 M2

Billiard And Game Facilities.................................................................... 150 M2
Carpark..................................................................................................700 Cars

Total Construction Area:

39075

M2
(With 25 percent Circulation Area)
Minimum Site Area Requirement:

12.000

M2

3 Convention hall elevators

2 Escalators between meeting and exhibit floors
6 Guest elevators two of which connect garage and lobby floors
3 Service elevators one being freight
2 Truck elevators to serve the exhibit and banquet floors
6 Truck dock (for exhibit hall)
1 Housekeeping room for each 15 guestroom at floor with necessary evacuation
stairs.

136

BIBLOGRAPHY

1. Abraben E., Resort Hotels (Reinhold Publishing Corporation: New York),

1965
2. Arkitera, Maslak'a Dubai Modeli kiz Kule,
http://www.arkitera.com/haberler/2001/12/10/dubai.htm, 10.12.2003
3. Banerjee and Southworth, City sense and city design: Projects of Kevin
Lynch (The MIT Press :Cambridge), 1990
4. etiner Ayten, ehircilik almalarnda Donatm lkekeri (I.T.U Press:
Gmsuyu), 1972
5.

Dou Orhan, Oteller (Birsen Yaynevi : stanbul)

6.

Egel Hande, An Alternative Tourism Policy Proposal, Convention Tourism

and Design Criteria for A Convention Center in Antalya, Unpublished Thesis
submitted to Middle East Technical University (M.E.T.U: Ankara), 1995

7. Evans Richard, Regenerating Town Centres (Manchester University Press:

Manchester), 1997
8. Forsyth Patric, Maximizing Hospitality Sales; How To Sell Hotels, Venues
And Conferences (Casell : Newyork), 1999
9. Francone Marcello, ed., S.O.M.: Selected Works, Master Architects Series
(Peleus Press: Sydney), 1995
10. Gker Mehmet ,Evaluation Of Tourism Investment Projects And A
Systematization Proposal, Unpublshed thesis Submitted to Middle East
Technical University (M.E.T.U: Ankara), 1991
137

11. Holmes-Siedle, James, Barrier-Free Design: A Manual For Building

Designers And Managers (Butterwoth Architecture: Oxford), 1996
12. Hotel Facilities: New Concepts In Architecture And Design Journal (Meisei
Publications: Tokyo), 1997
13. Hilton Hospitality Inc., Design Guide for Hilton Hotels (Hilton Hotels Inc.:
Washington), 2002
14. Hilton Hospitality Inc., Meeting Facilites and Venues,
http://conradhotels.hilton.com/en/ch/hotels/index.jhtml;jsessionid=GEMU1P
FK0MRN2CSGBIWMVCQKIYFC5UUC?ctyhocn=ISTHCCI, 12.10.2003
15. Hyatt Regency Hotel Groups, Hyatt Regency Dallas: Meeting Facilities
http://dallasregency.hyatt.com/property/meetingsevents/meetings/floor_plan.j
html?fpnav=1, (Official Web Site Of Hyatt Corporation Inc. , 21.06.2003)
16. Hyatt Regency Hotel Groups, Hyatt Regency Dallas at Forth Worth,
http://dfwairport.hyatt.com/property/meetingsevents/meetings/rooms.jhtml,
(Official Web Site Of Hyatt Corporation Inc. , 21.06.2003
17. Hyatt Regency Hotel Groups, Hyatt Regency Chicago at Riverwalk
http://chicagoregency.hyatt.com/property/meetingsevents/meetings
(Official Web Site Of Hyatt Corporation Inc. , 19.06.2003)
18. Hyatt Regency Hotel Groups, Hyatt Regency Washington D.C.
http://washingtonregency.hyatt.com/property/meetingevents
(Official Web Site Of Hyatt Corporation Inc., 15.12.2003)
19. Inskeep, Edward, Tourism planning: an integrated and sustainable
development approach (Van Nostrand Reinhold.: New York), 1991

138

20. Katz Peter, The new urbanism: Toward an Architecture of Community ( Mc

Graw Hill: New York), 1994
21. Kalkan Orhan ,Turizm Mevzuatmz (T.H.K. Basmevi , Ankara), 1995
22. Kumral Blent, Turizm yaplar: Tatil Ve Turizm Tesisleri, Kent Otelleri,
Ulam Tesisleri (YEM :stnabul) 1994
23. Lawson Fred, Hotels and Resorts: Planning Design and Refurbishment
(Butterworth Architectures: New York )1995
24. Lawson Fred ,Hotels, Motels and Condominiums (Architectural Press
Publications: London), 1990
25. Lawson Fred ,Congress,Convention and Exhibition Facilities: Planning,
Design and Refurbishment (Architectural Press Publications: London), 2000
26. Marriott Hotels and Resorts, Floor Plans: Marriott Pennsylvania
http://marriott.com/property/meetingsAndEvents/PHLDT, 21.12.2003
27. Marriott Hotels and Resorts, Floor Plans and Venue Capacities: Marriott San
Antonio, http://marriott.com/property/meetingsAndEvents 12.12.2003
28. Mc Intyre, George, Sustainable tourism development: guide for local planners
(World Tourism Organization: Spain), 1993
29. Penner Richard, Conference Centre Planning And Design: A Guide For
Architects,

Designers,

Meeting

Planners,

And

Facility

Managers

(Architectural Design and Technology Press: London), 1991

30. Paulhans Peter, Kongre Merkezleri ve oteller (Yaprak: Ankara), 1979

139

31. Pei Cobb Freed and Partners LLP, Raffles City Convention Hotel,
http://www.pcfandp.com/a/p/7314/s.html. (Official Web Page of Pei Cobb
Freed and Partners LLP, 29.03.2004)
32. Riewold Otto, Hotel Design (Laurance King :London), 1998
33. Rushmore Stephen, Hotel Investment Handbook (West Group : New York),
1997
34. Rutes A. Walter, Hotel Planning and Design (Watson-Guptill: New York)
1991
35. Rutes Walter,Penner Ricahrd h., Adams Lawrence, Hotel Design, Planning
and Development (Architectural Press, London), 2001
36. Womersley, Steve. ed., Portman John. The Master Architect Series VI, John
Portman & Associates Selected and Current Works.( Images Publishing,
Australia), 2002
37. Schutz Christian Norberg, Bruce Graham of S.O.M. (Rizzoli: New York),
1989
38. Salam Hakan, A Hotel Design n Pamukkale (Hierapolis),Unpublished
Thesis submitted to Mddle East Technical University (M.E.T.U: Ankara),
1990
39. Stipanuk M. David, Hospitality Facilities: Management and Design
(Michigan : U.S.A), 1992
40. TMMOB Mimarlar Odas , mar Ynetmelii; Fikir ve Sanat Eserleri Kanunu
(Chamber of Architects:Ankara), 2003
41. Tourism Policy for Urban Hotels, (Ministry of Tourism:Ankara), 2000

140

42. Vancouver Convention & Exhibition Centre, Exhibition venues and

Facilities, http://www.vanconex.com/home.html, 07.07.2003
43. Yacolu Smer, Otellerin Mimari ,Teknik, letme Ve Organizasyon
zellikleri, Unpublished Master Thesis (.T.: stanbul), 2000
44. Weisskamp Herbert, Hotels (Frederick A Prager Publishers: New York),
1968

141