Computer Science and Engineering

VI SEM CSE

CS1351

Artificial Intelligence

UNIT-III Question and Answers

(1) How Knowledge is represented?
A variety of ways of knowledge(facts) have been exploited in AI programs.
Facts : truths in some relevant world. These are things we want to represent.
(2) What is propositional logic?
It is a way of representing knowledge.
In logic and mathematics, a propositional calculus or logic is a formal system in which
formulae representing propositions can be formed by combining atomic propositions
using logical connectives
Sentences considered in propositional logic are not arbitrary sentences but are the ones
that are either true or false, but not both. This kind of sentences are called propositions.
Example
Some facts in propositional logic:
It is raning.
- RAINING
It is sunny
- SUNNY
It is windy
- WINDY
If it is raining ,then it is not sunny

RAINING ->

SUNNY

(3) What are the elements of propositional logic?

Simple sentences which are true or false are basic propositions. Larger and more complex
sentences are constructed from basic propositions by combining them with connectives.
Thus propositions and connectives are the basic elements of propositional logic. Though
there are many connectives, we are going to use the following five basic connectives
here:
NOT, AND, OR, IF_THEN (or IMPLY), IF_AND_ONLY_IF.
They are also denoted by the symbols:
,

, respectively.

(4) What is inference?

Inference is deriving new sentences from old.

(5) What are modus ponens?

There are standard patterns of inference that can be applied to derive chains of
conclusions that lead to the desired goal. These patterns of inference are called inference
rules. The best-known rule is called Modus Ponens and is written as follows:

(6) What is entailment?

Propositions tell about the notion of truth and it can be applied to logical reasoning.
We can have logical entailment between sentences. This is known as entailment where a
sentence follows logically from another sentence. In mathematical notation we write :

(7) What are knowledge based agents?

The central component of a knowledge-based agent is its knowledge base, or KB. Informally,
a knowledge base is a set of sentences. Each
sentence is expressed in a language called a knowledge representation language and
represents some assertion about the world.

Figure 7.1 shows the outline of a knowledge-based agent program. Like all our agents,
it takes a percept as input and returns an action. The agent maintains a knowledge base, KB,
which may initially contain some background knowledge. Each time the agent program is
called, it does three things. First, it TELLS the knowledge base what it perceives. Second, it
ASKS the knowledge base what action it should perform. In the process of answering this
query, extensive reasoning may be done about the current state of the world, about the
outcomes of possible action sequences, and so on.

(8) Explain in detail the connectives used in propositional logic.

The syntax of propositional logic defines the allowable sentences. The atomic sentencesthe indivisible syntactic elements-consist of a single proposition symbol. Each such symbol

stands for a proposition that can be true or false. We will use uppercase names for
symbols: P, Q, R, and so on.
Complex sentences are constructed from simpler sentences using logical connectives.
There are five connectives in common use:

Figure 7.7 gives a formal grammar of propositional logic;

(9) Define First order Logic?

Whereas propositional logic assumes the world contains facts,
first-order logic (like natural language) assumes the world contains
Objects: people, houses, numbers, colors, baseball games, wars,
Relations: red, round, prime, brother of, bigger than, part of, comes between,

Functions: father of, best friend, one more than, plus,

(10)

Specify the syntax of First-order logic in BNF form.

(11)

Compare different knowledge representation languages.

(12)

What are the syntactic elements of First Order Logic?

The basic syntactic elements of first-order logic are the symbols that stand for
objects,
relations, and functions. The symbols,come in three kinds:
a) constant symbols, which stand for objects;
b) predicate symbols, which stand for relations;
c) and function symbols, which stand for functions.
We adopt the convention that these symbols will begin with uppercase letters.
Example:
Constant symbols :
Richard and John;
predicate symbols :
Brother, OnHead, Person, King, and Crown;
function symbol :
LeftLeg.
(13)
What are quantifiers?
There is need to express properties of entire collections of objects,instead of
enumerating the objects by name. Quantifiers let us do this.
FOL contains two standard quantifiers called
a) Universal () and
b) Existential ()
Universal quantification
(x) P(x) :
means that P holds for all values of x in the domain associated
with that variable
E.g., (x) dolphin(x) => mammal(x)
Existential quantification
( x)P(x) means that P holds for some value of x in the domain associated
with that variable
E.g., ( x) mammal(x) ^ lays-eggs(x)
Permits one to make a statement about some object without naming it
(14)
Explain Universal Quantifiers with an example.
Rules such as "All kings are persons,'' is written in first-order logic as
x King(x) => Person(x)
where is pronounced as For all ..
Thus, the sentence says, "For all x, if x is a king, then z is a person."
The symbol x is called a variable(lower case letters)
The sentence x P,where P is a logical expression says that P is true for every
object x.
(15)

Explain Existential quantifiers with an example.

Universal quantification makes statements about every object.

It is possible to make a statement about some object in the universe without

naming it,by using an existential quantifier.
Example
King John has a crown on his head
x Crown(x) ^ OnHead(x,John)
x is pronounced There exists an x such that .. or For some x ..
(16)

What are nested quantifiers?

Example-2
Everybody loves somebody means that
for every person,there is someone that person loves
x y Loves(x,y)
(17)
Explain the connection between
and
Everyone likes icecream is equivalent
there is no one who does not like ice cream
This can be expressed as :
x Likes(x,IceCream) is equivalent to
Likes(x,IceCream)
(18)
What are the steps associated with the knowledge Engineering
process?
Discuss them by applying the steps to any real world application of your choice.
Knowledge Engineering
The general process of knowledge base constructiona process is called knowledge
engineering.
A knowledge engineer is someone who investigates a particular domain, learns what
concepts are important in that domain, and creates a formal representation of the objects
and relations in the domain. We will illustrate the knowledge engineering process in an
electronic circuit domain that should already be fairly familiar,

The steps associated with the knowledge engineering process are :

1. Identfy the task.
. The task will determine what knowledge must be represented in order to connect problem
instances to answers. This step is analogous to the PEAS process for designing agents.

2. Assemble the relevant knowledge. The knowledge engineer might already be an expert
in the domain, ormight need to work with real experts to extract what they know-a
process called knowledge acquisition.
3. Decide on a vocabulary of predicates, functions, and constants. That is, translate the
important domain-level concepts into logic-level names.
Once the choices have been made. the result is a vocabulary that is known as the ontology of
the domain. The word ontology means a particular theory of the nature of being or
existence.
4. Encode general /cnowledge about the domain. The knowledge engineer writes down
the axioms for all the vocabulary terms. This pins down (to the extent possible) the
meaning of the terms, enabling the expert to check the content. Often, this step reveals
misconceptions or gaps in the vocabulary that must be fixed by returning to step 3 and
iterating through the process.
5. Encode a description of the specijic problem insttznce.
For a logical agent, problem instances are supplied by the sensors, whereas a "disembodied"
knowledge base is supplied with additional sentences in the same way that traditional programs
are supplied with input data.
6. Pose queries to the inference procedure and get answers. This is where the reward is:
we can let the inference procedure operate on the axioms and problem-specific facts to
derive the facts we are interested in knowing.
7. Debug the knowledge base.
x NumOfLegs(x,4) => Mammal(x)
Is false for reptiles ,amphibians.
To understand this seven-step process better, we now apply it to an extended example-the
domain of electronic circuits.

The electronic circuits domain

We will develop an ontology and knowledge base that allow us to reason about digital circuits
of the kind shown in Figure 8.4. We follow the seven-step process for knowledge engineering.

Identify the task

There are many reasoning tasks associated with digital circuits. At the highest level, one
analyzes the circuit's functionality. For example, what are all the gates connected to the
first input terminal? Does the circuit contain feedback loops? These will be our tasks in this
section.
Assemble the relevant knowledge
What do we know about digital circuits? For our purposes, they are composed of wires and
gates. Signals flow along wires to the input terminalls of gates, and each gate produces a
signal on the output terminal that flows along another wire.
Decide on a vocabulary
We now know that we want to talk about circuits, terminals, signals, and gates. The next
step is to choose functions, predicates, and constants to represent them. We will start from
individual gates and move up to circuits.
First, we need to be able to distinguish a gate from other gates. This is handled by
naming gates with constants: X I , X2, and so on
Encode general knowledge of the domain
One sign that we have a good ontology is that there are very few general rules which need
to be specified. A sign that we have a good vocabulary is that each rule can be stated clearly
and concisely. With our example, we need only seven simple rules to describe everything we
need to know about circuits:
1. If two terminals are connected, then they have the same signal:
2. The signal at every terminal is either 1 or 0 (but not both):
3. Connected is a commutative predicate:
4. An OR gate's output is 1 if and only if any of its inputs is 1:
5. An A.ND gate's output is 0 if and only if any of its inputs is 0:
6. An XOR gate's output is 1 if and only if its inputs are different:
7. A NOT gate's output is different from its input:
Encode the specific problem instance
The circuit shown in Figure 8.4 is encoded as circuit C1 with the following description. First,
we categorize the gates:
Type(X1)= XOR Type(X2)= XOR
Pose queries to the inference procedure
What combinations of inputs would cause the first output of Cl (the sum bit) to be 0 and the
second output of C1 (the carry bit) to be l?
Debug the knowledge base
We can perturb the knowledge base in various ways to see what kinds of erroneous behaviors
emerge.

(19)

Give examples on usage of First Order Logic.

The best way to find usage of First order logic is through examples. The examples can be taken
from some simple domains. In knowledge representation, a domain is just some part of
the world about which we wish to express some knowledge.

Assertions and queries in first-order logic

Sentences are added to a knowledge base using TELL, exactly as in propositional logic. Such
sentences are called assertions.
For example, we can assert that John is a king and that kings are persons:

TELL(KB, King (John)) .

Where KB is knowledge base.

TELL(KB, x King(x) => Person(x)).
We can ask questions of the knowledge base using ASK. For example,
returns true.
Questions asked using ASK are called queries or goals
ASK(KB,Person(John))
Will return true.
(ASK KBto find whther Jon is a king)

ASK(KB, x person(x))

The kinship domain

The first example we consider is the domain of family relationships, or kinship.
This domain includes facts such as
"Elizabeth is the mother of Charles" and
"Charles is the father of William7' and rules such as
"One's grandmother is the mother of one's parent."
Clearly, the objects in our domain are people.
We will have two unary predicates, Male and Female.
Kinship relations-parenthood, brotherhood, marriage, and so on-will be represented by binary
predicates: Parent, Sibling, Brother, Sister, Child, Daughter,Son, Spouse, Husband,
Grandparent, Grandchild, Cousin, Aunt, and Uncle.
We will use functions for Mother and Father.

(20)

What is universal instantiation?

Universal instantiation (UI)

Existential instantiation (EI)

(21)

What is forward chaining? Explain with an example.

Using a deduction to reach a conclusion from a set of antecedents is called forward

chaining. In other words,the system starts from a set of facts,and a set of rules,and tries to
find the way of using these rules and facts to deduce a conclusion or come up with a
suitable couse of action. This is known as data driven reasoning.
EXAMPLE

The proof tree generated by forward chaining.

Example knowledge base
The law says that it is a crime for an American to sell weapons to hostile nations.
The country Nono, an enemy of America, has some missiles, and all of its
missiles were sold to it by Colonel West, who is American.

Note:

Prove that Col. West is a criminal

(a) The initial facts appear in the bottom level

(b) Facts inferred on the first iteration is in the middle level
(c) The facts inferered on the 2nd iteration is at the top level
Forward chaining algorithm

(22)
What is backward chaining ? Explain with an example.
Forward chaining applies a set of rules and facts to deduce whatever conclusions can
be derived.
In backward chaining ,we start from a conclusion,which is the hypothesis we wish
to prove,and we aim to show how that conclusion can be reached from the rules and
facts in the data base.
The conclusion we are aiming to prove is called a goal ,and the reasoning in this way
is known as goal-driven.
Backward chaining example

Fig : Proof tree constructed by backward chaining to prove that West is criminal.

Note:
(a) To prove Criminal(West) ,we have to prove four conjuncts below it.
(b) Some of which are in knowledge base,and others require further backward
chaining.
(23)

Explain conjunctive normal form for first-order logic with an example.

Every sentence of first-order logic can be converted into an inferentially equivalent CNF
sentence. In particular, the CNF sentence will be unsatisfiable just when the original sentence
is unsatisfiable, so we have a basis for doing proofs by contradiction on the CNF sentences.
Here we have to eliminate existential quantifiers. We will illustrate the procedure by translating
the sentence "Everyone who loves all animals is loved by someone," or

(24)

What is Ontological Engineering?

Ontology refers to organizing every thing in the world into hierarch of categories.
Representing the abastract concepts such as Actions,Time,Physical Objects,and Beliefs is
called Ontological Engineering.

(25)
How categories are useful in Knowledge representation?
CATEGORIES AND OBJECTS
The organization of objects into categories is a vital part of knowledge representation. Although
interaction with the world takes place at the level of individual objects, much reasoning
takes place at the level of categories.

(26)

What is taxonomy?

Subclass relations organize categories into a taxonomy, or taxonomic hierarchy. Taxonomies

have been used explicitly for centuries in technical fields. For example, systematic
biology aims to provide a taxonomy of all living and extinct species; library science has
developed a taxonomy of all fields of knowledge, encoded as the Dewey Decimal system;
and
tax authorities and other government departments have developed extensive taxoriornies of
occupations and commercial products. Taxonomies are also an important aspect of general
commonsense knowledge.
First-order logic makes it easy to state facts about categories, either by relating objects
to categories or by quantifying over their members:

(27)

What is physical composition?

(28)
Explain the Ontology of Situation calculus.
Situations are logical terms consisting of the initial situation (usually called So) and
all situations that are generated by applying an action to a situation. The function
Result(a, s) (sometimes called Do) names the situation that results when action a is
executed in situation s. Figure 10.2 illustrates this idea.
Fluents are functions and predicates that vary from one situation to the next, such as
the location of the agent or the aliveness of the wumpus. The dictionary says a fluent
is something that fllows, like a liquid. In this use, it means flowing or changing across
situations. By convention, the situation is always the last argument of a fluent. For
example, lHoldzng(G1, So) says that the agent is not holding the gold GI in the initial
situation So. Age( Wumpus, So) refers to the wumpus's age in So.
Atemporal or eternal predicates and functions are also allowed. Examples include the
predicate Gold (GI) and the function LeftLeg Of ( Wumpus).

(29)
What is event calculus?
Time and event calculus
Situation calculus works well when there is a single agent performing instantaneous, discrete
actions. When actions have duration and can overlap with each other, situation calculus
becomes somewhat awkward. Therefore, we will cover those topics with an alternative forEVENTCALCULUS malism known as event calculus, which is based on points in time rather than
on situations.
(The terms "event ' and "action" may be used interchangeably. Informally, "event" connotes
a wider class of actions, including ones with no explicit agent. These are easier to handle in
event calculus than in situation calculus.)
In event calculus, fluents hold at points in time rather than at situations, and the calculus
is designed to allow reasoning over intervals of time. The event calculus axiom says that a
fluent is true at a point in time if the fluent was initiated by an event at some time in the past
and was not terminated by an intervening event. The Initiates and Terminates relations
play a role similar to the Result relation in situation calculus; Initiates(e, f , t) means that
the occurrence of event e at time t causes fluent f to become true, while Terminates (w , f, t)
means that f ceases to be true. We use Happens(e, t) to mean that event e happens at time t,
7

(30)
What are semantic networks?
(31)
Semantic networks are capable of representing individual
objects,categories of objects,and relation among objects. Objects or Ctegory
names are represented in ovals and are connected by labeled arcs.
Semantic network example