GenSet Eng Part I

THE COMPANY
Gen Set S.p.a. was founded in 1974, with the objective of designing and
manufacturing portable generators. Since then the Company has primelly
developed its production capacity, broadened its range of products and
increased its market share in Italy and abroad.
In 1997 Gen Set has been acquired by Thermadyne Company.
The Companys headquarters are located in Villanova dArdenghi (Pavia), about
30 km south of Milan, close to the Milan-Genoa motorway. On a total area of
35,000 m 2, more than two thirds are occupied by the factory and office
buildings.
All phases of product development are done internally: concept, design,
implementation, manufacturing.
The products range composes of:
- DC engine driven welders from 170 A to 1000 A,
special versions available with two, three or four independent welding units
- AC power generators from 1 kVA to 550 kVA for manual or auto start
operation.
INNOVATION
Since the very beginning of our activity,
we have been focusing on innovation.
This is demonstrated in concrete terms
by the amount of financial and human
resources involved in the development
of new products and new technical
solutions. Both the various international
patents held and the use ot the latest
software for computer-assisted design
and engineering (CAD/CAE - 3D), are
proof of our company trend.
QUALITY
In line with his policy of
constant innovation Gen Set
has achieved, in the month of
November 2002, the Quality
System
Certification
according to the latest BS EN
ISO 9001:2000 standards
whose guidelines involve
every single Company action:
from design to manufacturing, from purchasing to
sales.
CUSTOMER ORIENTED POLICY

It is not just a slogan, this policy is a
reality at all levels of our organization.
This focus on customer is prooved
by:
- the wide range of products;
- the numerous optionals and
special configurations available
for each model;
- the variety of special solutions
engineered.
DESIGN AND MANUFACTURING

The Company develops the complete
design of its products, by studying
their electrical part, their electronics,
their thermodynamics and soundproofing.
A final test is carried out on
every single model.
All asynchronous alternators
mounted on the entire engine
driven welders range and on the
power generators from 5 kVA to 18
k VA , a r e b u i l t o n a m o d e r n s e m i automated production-line.
Structural components are produced on the

steel-work department, equipped with a stateof-the-art sheet metal working equipment,
including automatic punch presses, CNCs, laser
sheet-cutting machines and automatic welding
carousels.
An environmentally friendly dry powder painting
process is used. Each metal part is chemically
treated with a two-stage phosphatizing process,
which removes all impurities ensuring the
adherence of the polyurethane powder paint.
The final result is a homogeneous finish with
high mechanical resistance to corrosion and
scratches.
MARKET
Our products are distributed in Italy through over 1,200 dealers. In the past
twenty-five years we have increased our international and domestic market
shares: Gen Set products have been sold in over 60 Countries.
Technology, competence, experience, quality: these are the ingredients
that make Gen Set Engine Driven Welders and Generating Sets highly
professional and reliable products.
CUSTOMER SERVICE
At our main offices a fully dedicated team of technicians is available to respond to
customers questions. These technicians
ensure that a machine appropriate to
customers application needs is
choosen, and they are also to
provide after sale service.
In addition there are authorized
technical assistance workshops
located throughout Italy.
In all other countries, where
we operate, service is provided
by local organizations, whose
technicians are regularly updated
and trained.
Gen Set offers one year warranty
on all of its products.
INDEX
Some hints about noise
ENGINE DRIVEN WELDERS (MPM
RANGE)
Page
Page
10
MPM 5/170 I-AC/H
- 170 A AC - Petrol Engine
Page
11
MPM 5/170 I-CX/H
- 170 A DC - Petrol Engine
Page
12
MPM 5/180 I-EL/H
Page
13
MPM 5/180 I-D/AE-Y - 170 A DC - Diesel Engine 3000 rpm
Page
14
MPM 5/180 I-D/AE
Page
15
MPM 5/180 SS-DY/EL - 180 A DC - Super Silenced - Diesel Engine 3000 rpm
Page
16
MPM 5/180 SS-DL/EL - 180 A DC - Super Silenced - Diesel Engine 3000 rpm
Page
17
MPM 5/190 I-EB/H
Page
18
MPM 5/225 SS-DR/EL - 225 A DC - Super Silenced - Diesel Engine 3000 rpm
Page
19
MPM 7/265 I-DR/EL
- 260 A DC - Diesel Engine 3000 rpm
Page
20
MPM 8/270 I-EL/H
Page
21
MPM 8/300 IC-EL
- 300 A DC - Soundproof - Diesel Engine 3000 rpm
Page
22
MPM 8/300 I-KA
Page
23
MPM 8/300 SS-KA
- 300 A DC - Super Silenced - Diesel Engine 3000 rpm
Page
24
MPM 8/320 S-LW
Page
25
MPM 15/400 I-KA
Page
26
MPM 15/400 SS-KA
- 400 A DC - Super Silenced - Diesel Engine 3000 rpm
Page
27
MPM 15/400 IC-L
Page
28
MPM 16/400 I-VM
Page
29
MPM 15/420 S-LW
Page
30
MPM 20/500 DZ
Page
31
MPM 20/500 PS
MPM 20/500 I-PS
Page
32
MPM 20/600 DZ
Page
33
MPM 20/600 PS
MPM 20/600 I-PS
Page
34
SPECIAL MACHINES SERIES
Page
35
TERMINOLOGY
Page
37
GENERATING SETS (MG
RANGE)
Page
43
MG 1000 SS-H
- 230 V single phase (1 kVA) - Super Silenced - Petrol Engine
Page
44
MG 2200 I-H
- 230 V single phase (2 kVA) - Petrol Engine
Page
45
MG 3000 I-H
MG 3000 I-H/AE
- 230 V single phase (3 kVA) - Petrol Engine - Electric Start
Page
46
MG 3000 I-HE
Page
47
MG 5000 I-HE
Page
48
MG 5000 I-H
MG 5000 I-H/AE
Page
49
MG 5000 I-Y/E
- 230 V single phase (4 kVA) - Diesel Engine 3000 rpm
Page
50
MG 6000 I-H
MG 6000 I-H/AE
Page
51
MG 6000 I-D/AE-Y
Page
52
MG 6000 I-D/AE
Page
53
MG 6000 SS-Y
- 230 V single phase (6 kVA) - Super Silenced - Diesel Engine 3000 rpm
Page
54
MG 6000 SS-L
Page
55
MG 6000 SS-K
Page
56
MG 8000 SS-DR
Page
57
INDEX
MG 10000 I-H/AE
Page
58
MG 10000 SS-K
Page
59
MG 5/4 I-HE
- 400 V three phase (5,5 kVA) - 230 V single phase (4 kVA) - Petrol Engine
Page
60
MG 5/4 I-H
- 400 V three phase (5,5 kVA) - 230 V single phase (4 kVA) - Petrol Engine
MG 5/4 I-H/AE
- Electric Start model
Page
61
MG 6/5 I-D/AE-Y
- 400 V three phase (6 kVA) - 230 V single phase (5 kVA) - Diesel Engine 3000 rpm
Page
62
MG 6/5 I-D/AE
Page
63
MG 6/5 SS-Y
- 400 V three phase (6 kVA) - 230 V single phase (5 kVA) - Super Silenced
Page
64
Page
65
Page
66
Page
67
Page
68
Page
69
Page
70
Page
71
Page
72
Page
73
Page
74
Page
75
Page
76
Page
77
Page
78
Page
79
Page
80
Page
81
MG 30 kVA - 150 kVA - Soundproof and Super Silenced Range - Perkins Diesel Engines 1500 rpm
Page
82
MG 200 kVA - 550 kVA - Soundproof and Super Silenced Range MG 13 to 550 KVA SKID MOUNTED Range
Page
87
MG US
- Generating Sets from 10 kVA to 70 kVA - Ultra Silenced
Page
88
MG SS-A
- Motor Vehicles Power Generators
Page
89
MG AA
- Auto Start Generating Sets
Page
90
LIGHTING TOWERS
Page
91
GEN SET TRAILERS
Page
92
Diesel Engine 3000 rpm

MG 6/5 SS-L
MG 8 SS-DR
MG 9/6 S-LW
- 400 V three phase (9 kVA) - 230 V single phase (6 kVA) - Silenced

MG 10 I-H/AE
- 400 V three phase (10 kVA) - 230 V single phase (4 kVA) - Petrol Engine
MG 10/8 I
- 400 V three phase (10 kVA) - 230 V single phase (8 kVA) - Soundproof
MG 10/8 SS-K
MG 15/8 S-LW

MG 15/10 I-L
MG 15/10 SS-K

MG 16 SS-L
MG 18/10 S-LW

MG 20 SS-K
MG 22 SS-L

MG 22 SS-Y
MG 30 PS
MG 30 I-PS
- Soundproof version
MG 50 PS
- 400 V three phase (50 kVA) - 230 V single phase (16,5 kVA) - Diesel Engine 1500 rpm
MG 50 I-PS
- Soundproof version
MG 70 I-PS
SOME HINTS ABOUT NOISE

Noise Level (LWA)
i.e.: machine with LWA = 90 dB:

Lp
Lp
Lp
Lp
Lp
Represents the acoustic energy emission from

a source in the unit time, indipendently
from the distance. The LWA is the measure of
the machine noise level as per European Regulations. It is measured in dB(A).
at 1 metre = 90 dB 8 dB = 82 dB
at 4 metres = 90 dB 20 dB = 70 dB
Acoustic Pressure (Lp)

Represents the pressure caused by acoustic
waves emission measured at a certain distance from the source. Its value changes
according to the different distances from
the source. It is measured in dB(A).
The new EC Regulations, according to the

2000/14/EC Directive, provide the following homologated Noise Levels:
ENGINE DRIVEN WELDERS
Note
Sometimes there is a certain misunderstanding between LWA and Lp. The following table
shows the mathematical relation between LWA
and Lp values at different distances from the
source:
Lp
Lp
Lp
Lp
Lp
at 1 metre = LWA 8 dB
at 4 metres = LWA 20 dB
Maximum Welding
Output
up to 400 A
above 400 A
EC Allowed
Noise Level (LWA)
99
98
GENERATING SETS
Maximum output
up to 2 kW
from 2 to 10 kW
from 10 to 30 kW
above 50 kW
EC Allowed Noise Level (LWA)
97
99
98
99
ENGINE DRIVEN WELDERS

(MPM Range)
DC engine driven welders
from 170 A to 1000 A
Special versions available with two, three
or four independent welding units
ENGINE DRIVEN WELDERS (MPM RANGE)

The Gen Sets Engine Driven Welders range (MPM) has been designed to meet
requirements of customers needing highly professional welding equipment.
This result has been achieved through the
unique features of the G e n S e t s
asynchronous brushless alternator:
versatility, reliability and efficiency.
Versatility:
stepless current regulation, also
remotely controlled;
"Down-Hill" vertical welding facility;
MIG/MAG welding;
Lift TIG welding facility;
Carbon Arc Gouging;
Auxiliary AC power available also while
welding.
Reliability:
No alternator brushes or rotating diodes; only a single bearing squirrel
cage rotor: no maintenance required.
Efficiency:
The MPM asynchronous brushless alternator is more efficient than
conventional synchronous alternators, which results in:
more welding capacity;
better quality current with a smooth waveform and a very low harmonic
distortion: suitable for powering sensitive equipments
more auxiliary power available
in single-phase
lower fuel consumption;
longer engine life.
Wheter you need to weld a pipeline
in Siberia or in Saudi Arabia, operate
in a strict sound regulation area,
carry out industrial maintenance jobs
or steel structures, we can provide
you the right welding equipment in
terms of:
several makes of air and
water cooled engines;
highly effective soundproofing;
different welding processes;
number of available options.
10
- ENGINE DRIVEN WELDERS -
www.genset.it
MPM 5/170 I-AC/H
Petrol Engine Driven Welder/Generator Delivers 170 A of AC weld output

Single phase auxiliary power available
Gen Set Options
Gen Set Features
(available as factory options)
Processes: STICK
Low oil level cut out device
1 x 230 V - 50 Hz single phase outlet protected by circuit
breaker
Voltmeter
Versions with different voltages

60 Hz version
Noise Level
Gen Set Accessories
LWA 95
Trolley: two-wheels and handles

Welding cables 25 mm2 (5+3 m) with accessories
AC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%
Output Range
PETROL ENGINE - 3000

Type
Honda GX 270 OHV - 1 cyl. - 9 HP - 270 cm3
150 A - 25 V
Fuel
petrol
40 A 170 A
60 V
3,25 mm
AC GENERATOR - 50 HZ
Type
Single Phase Power
www.genset.it
RPM
170 A - 25 V
Open Circuit Voltage

Max welding rod
(75 dB(A) at 4m)
Gen Set asynchronous

brushless
4 kVA - 230 V
Cooling system
air
Starting system
manual recoil
Fuel tank capacity
6,5 l
Specific consumption
DIMENSIONS
LxWxH
Net Weight
313 g/KWh
AND
WEIGHT
720 x 480 x 515 mm
85 kg
11
MPM 5/170 I-CX/H
Petrol Engine Driven Welder/Generator Delivers 170 A of DC weld output

Three phase and Single phase auxiliary power available
Gen Set Options
Gen Set Features
Processes: STICK
1 x 400 V - 50 Hz three phase outlet
1 x 230 V - 50 Hz single phase outlet protected by
circuit breaker
Earth Leakage Circuit Breaker (ELCB)
Voltmeter

60 Hz version
Noise Level
Gen Set Accessories
LWA 95

Parallel Welding Box with ammeter and voltmeter (P-BOX)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%
Output Range

Type
140 A - 26 V
Fuel
petrol
40 A 170 A
90 V
Max welding rod
4 mm
brushless
Three Phase Power
4,5 kVA - 400 V
Single Phase Power
3 kVA - 230 V
12
RPM
170 A - 27 V
Type
(75 dB(A) at 4m)
Cooling system
air
Starting system
manual recoil
Fuel tank capacity
6,5 l
DIMENSIONS
LxWxH
Net Weight
313 g/KWh
AND
WEIGHT
720 x 480 x 515 mm
94 kg
www.genset.it
MPM 5/180 I-EL/H

less ol
p
e
t
S
ontr
C
t
n
urre

Gen Set Options
Gen Set Features

Processes: STICK - SCRATCH TIG
1 x 230 V - 50 Hz single phase outlet protected by circuit breaker
Voltmeter
ARC FORCE CONTROL switch
Remote control socket

60 Hz version
Noise Level
Gen Set Accessories
LWA 96

Remote control unit complete with 20m cable and plug
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%
Stepless current adjustment

Type
150 A - 26 V
Fuel
petrol
30 A 180 A
70 V
Max welding rod
4 mm
brushless
Three Phase Power
4,5 kVA - 400 V
Single Phase Power
3 kVA - 230 V
www.genset.it
RPM
180 A - 27 V
Type
(76 dB(A) at 4m)
Cooling system
air
Starting system
manual recoil
Fuel tank capacity
6,5 l
DIMENSIONS
LxWxH
Net Weight
313 g/KWh
AND
WEIGHT
720 x 480 x 515 mm
96 kg
13
MPM 5/180 I-D/AE-Y
Diesel Engine Driven Welder/Generator Delivers 170 A of DC weld output

Gen Set Options
Gen Set Features

Processes: STICK
Low oil pressure and battery charger warning lights
Built-in battery
1 x 48 V - 50 Hz single outlet (low safety voltage)
Voltmeter

Hourmeter
60 Hz version
Noise Level
Gen Set Accessories
LWA 99

DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%
Output Range
DIESEL ENGINE - 3000

Type
Yanmar L100 AE - 1 cyl. - 10 HP - 406 cm3
140 A - 26 V
Fuel
diesel
40 A 170 A
90 V
Max welding rod
4 mm
Cooling system
air
Starting system
electric (and manual)
Fuel tank capacity
5,5 l
DIMENSIONS
Gen Set asynchronous - brushless
Three Phase Power
5 kVA - 400 V
LxWxH
Single Phase Power
4 kVA - 230 V
Net Weight
Single Phase Power
1,5 kVA - 48 V
14
RPM
170 A - 27 V
Type
(79 dB(A) at 4m)
260 g/KWh
AND
WEIGHT
920 x 460 x 570 mm
148 kg
www.genset.it
MPM 5/180 I-D/AE

Gen Set Options
Gen Set Features

Processes: STICK
Built-in battery
1 x 48 V - 50 Hz single outlet (safety low voltage)
Voltmeter

Hourmeter
60 Hz version
Noise Level
Gen Set Accessories
LWA 99

DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%
Output Range

Type
Lombardini 15LD 400 - 1 cyl. - 10 HP - 401 cm3
140 A - 26 V
Fuel
diesel
40 A 170 A
90 V
Max welding rod
4 mm
Cooling system
air
Starting system
electric
Fuel tank capacity
5l
DIMENSIONS
Three Phase Power
5 kVA - 400 V
LxWxH
Single Phase Power
4 kVA - 230 V
Net Weight
Single Phase Power
1,5 kVA - 48 V
www.genset.it
RPM
170 A - 27 V
Type
(79 dB(A) at 4m)
220 g/KWh
AND
WEIGHT
920 x 460 x 570 mm
143 kg
15
MPM 5/180 SS-DY/EL

less ol
p
e
t
S
ontr
C
t
n
urre
New

Three phase and Single phase auxiliary power available Super Silenced model
Gen Set Options
Gen Set Features

Processes: STICK / SCRATCH TIG
DAS, auto engine protection shutdown system with warning
lights in case of:
- low oil pressure
- battery charger failure
- low fuel level
Built-in battery
Hourmeter
circuit breaker
1 x 48 V - 50 Hz single phase outlet (safety low voltage)
Generator voltage warning light
Side lifting eyes

60 Hz version
Gen Set Accessories
Noise Level
LWA 96

(76 dB(A) at 4m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

180 A - 27 V
Type
Yanmar L100 AE - 1 cyl. - 10 HP - 406 cm3
150 A - 26 V
Fuel
diesel
30 A 180 A
65 V
Max welding rod
4 mm
Type
Cooling system
air
Starting system
electric
Fuel tank capacity
21 l
DIMENSIONS
Three Phase Power
5 kVA - 400 V
LxWxH
Single Phase Power
4 kVA - 230 V
Net Weight
Single Phase Power
1,5 kVA - 48 V
16
RPM
260 g/KWh
AND
WEIGHT
1070 x 570 x 700 mm
208 kg
www.genset.it
MPM 5/180 SS-DL/EL

less ol
p
e
t
S
ontr
C
t
n
urre
New

Gen Set Options
Gen Set Features

Low oil pressure, low fuel level and battery charger
warning lights
Built-in battery
Hourmeter
circuit breaker
Side lifting eyes

60 Hz version
Gen Set Accessories

Noise Level
LWA 94
(74 dB(A) at 4m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

180 A - 27 V
Type
Lombardini 15LD 400 - 1 cyl. - 10 HP - 401 cm3
150 A - 26 V
Fuel
diesel
30 A 180 A
65 V
Max welding rod
4 mm
Type
Cooling system
air
Starting system
electric
Fuel tank capacity
21 l
DIMENSIONS
Three Phase Power
5 kVA - 400 V
LxWxH
Single Phase Power
4 kVA - 230 V
Net Weight
Single Phase Power
1,5 kVA - 48 V
www.genset.it
RPM
220 g/KWh
AND
WEIGHT
1070 x 570 x 700 mm
203 kg
17
MPM 5/190 I-EB/H

Gen Set Options
Gen Set Features
Processes: STICK
circuit breaker
Voltmeter
Booster version:
DC - 400 A engine electric starter
adjustable from 10 A to 400 A,
complete with ammeter
60 Hz version
Gen Set Accessories

Noise Level
LWA 96
(76 dB(A) at 4m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%
Output Range

190 A - 28 V
Type
170 A - 27 V
Fuel
petrol
40 A 190 A
90 V
Max welding rod
4 mm
Type

brushless
Three Phase Power
5 kVA - 400 V
Single Phase Power
4 kVA - 230 V
18
RPM
Cooling system
air
Starting system
manual recoil
Fuel tank capacity
6,5 l
DIMENSIONS
LxWxH
Net Weight
313 g/KWh
AND
WEIGHT
720 x 480 x 515 mm
96 kg
www.genset.it
MPM 5/225 SS-DR/EL

less ol
p
e
t
S
ontr
C
t
n
urre
New
Gen Set Options
Gen Set Features

lights in case of:
- low oil pressure
- low fuel level
Built-in battery
Hourmeter
circuit breaker
Side lifting eyes
Noise Level
LWA 96

Gen Set Accessories

(76 dB(A) at 4m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

225 A - 29 V
Type
Ruggerini ECO MD190 - 2 cyl. - 13 HP - 851 cm3
175 A - 27 V
Fuel
diesel
30 A 225 A
65 V
Max welding rod
6 mm
Type
Cooling system
air
Starting system
electric
Fuel tank capacity
21 l
DIMENSIONS
Three Phase Power
5 kVA - 400 V
LxWxH
Single Phase Power
4 kVA - 230 V
Net Weight
Single Phase Power
1,5 kVA - 48 V
www.genset.it
RPM
260 g/KWh
AND
WEIGHT
1240 x 570 x 700 mm
270 kg
19
MPM 7/265 I-DR/EL

Gen Set Options
Gen Set Features

Built-in battery
Hourmeter
circuit breaker
Voltmeter
Central lifting eye

LIFT START TIG facility
Gen Set Accessories

Reverse polarity switch kit
Noise Level
LWA 99
(79 dB(A) at 4m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

260 A - 30 V
Type
Ruggerini RD 210 - 2 cyl. - 20 HP - 954 cm3
230 A - 29 V
Fuel
diesel
30 A 260 A
70 V
Max welding rod
6 mm
Type
Cooling system
air
Starting system
electric
Fuel tank capacity
16 l
DIMENSIONS
Three Phase Power
7 kVA - 400 V
LxWxH
Single Phase Power
5 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
20
RPM
250 g/KWh
AND
WEIGHT
985 x 470 x 820 mm
280 kg
www.genset.it
MPM 8/270 I-EL/H

Gen Set Options
Gen Set Features

Low fuel level warning light
Automatic idle device when no load is connected
Built-in battery
Fuel level gauge
Hourmeter
circuit breaker
Central lifting eye

CC/CV control for MIG/MAG welding
60 Hz version
Gen Set Accessories

MIG/MAG wire feeder
Spark arrestor muffler (Honda)
Noise Level
LWA 98
(78 dB(A) at 4m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%
PETROL ENGINE 3000

270 A - 31 V
Type
Honda GX 620 K1 - 2 cyl. - 20 HP - 614 cm3
250 A - 30 V
Fuel
petrol
15 A 270 A
70 V
Max welding rod
6 mm
Type

brushless
Three Phase Power
8 kVA - 400 V
Single Phase Power
6 kVA - 230 V
www.genset.it
RPM
Cooling system
air
Starting system
electric
Fuel tank capacity
37,5 l
DIMENSIONS
LxWxH
Net Weight
313 g/KWh
AND
WEIGHT
1080 x 530 x 710 mm
250 kg
21
MPM 8/300 IC-EL

Three phase and Single phase auxiliary power available Soundproof model
Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
Built-in battery
Hourmeter
Voltmeter
Fuel level gauge
Central lifting eye
Two-wheels site tow undercarriage (GRT2W)

Certified spark arrestor muffler
Gen Set Accessories
Noise Level
LWA 99
(79 dB(A) at 4m)

MIG/MAG wire feeder
Skid base for use directly on the ground
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

300 A - 32 V
Type
Ruggerini RD210 - 2 cyl. - 20 HP - 954 cm3
250 A - 30 V
Fuel
diesel
30 A 300 A
70 V
Max welding rod
6 mm
Type
Cooling system
air
Starting system
electric
Fuel tank capacity
38 l
DIMENSIONS
Three Phase Power
8 kVA - 400 V
L x W x H (trailer not included)
Single Phase Power
7 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
22
RPM
250 g/KWh
AND
WEIGHT
1300 x 620 x 810 mm
325 kg
www.genset.it
MPM 8/300 I-KA

Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
- high coolant temperature
Built-in battery
Hourmeter
Voltmeter.
Fuel level gauge
Central lifting eye

60 Hz version
Gen Set Accessories
Noise Level
LWA 99
(79 dB(A) at 4m)

MIG/MAG wire feeder
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

300 A - 32 V
Type
270 A - 31 V
Fuel
30 A 300 A
70 V
Max welding rod
6 mm
Type

brushless
Three Phase Power
8 kVA - 400 V
Single Phase Power
7 kVA - 230 V
www.genset.it
RPM
Kubota D722 - 3 cyl. - 17 HP - 719 cm3

diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
37,5 l.
DIMENSIONS
LxWxH
Net Weight
265 g/KWh
AND
WEIGHT
1330 x 530 x 870 mm
345 kg
23
MPM 8/300 SS-KA

Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
Built-in battery
Hourmeter - Voltmeter - Fuel level gauge
Central lifting eye

60 Hz version
Gen Set Accessories
Noise Level
LWA 94
(74 dB(A) at 4m)

MIG/MAG wire feeder
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

300 A - 32 V
Type
270 A - 31 V
Fuel
30 A 300 A
70 V
Max welding rod
6 mm
Type
Kubota D722 - 3 cyl. - 17 HP - 719 cm3

diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
42 l.
DIMENSIONS
Three Phase Power
8 kVA - 400 V
LxWxH
Single Phase Power
7 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
24
RPM
265 g/KWh
AND
WEIGHT
1385 x 660 x 915 mm
400 kg
www.genset.it
MPM 8/320 S-LW
New

Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
Built-in battery
Hourmeter - Voltmeter
Fuel level gauge
Central lifting eye

60 Hz version
Gen Set Accessories
Noise Level
LWA 96

MIG/MAG wire feeder
(68 dB(A) at 10m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

320 A - 32 V
Type
270 A - 30 V
Fuel
30 A 320 A
70 V
Max welding rod
6 mm
Type
Lombardini LDW1003 FOCS - 3 cyl. - 25 HP - 1028 cm3

diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
40 l
DIMENSIONS
Three Phase Power
8 kVA - 400 V
Single Phase Power
7 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
www.genset.it
RPM
260 g/KWh
AND
WEIGHT
1510 x 730 x 860 mm
425 kg
25
MPM 15/400 I-KA
New

Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
Built-in battery
Fuel level gauge
2 x 230 V - 50 Hz single phase outlets protected by circuit breakers
ARC FORCE CONTROL with changeover switch
basic / cellulosic welding rods
Central lifting eye
Noise Level
LWA 98
(70 dB(A) at 10m)

Remote control for Amperage and Arc Force
60 Hz version
(only available with KUBOTA D1005-E)
Gen Set Accessories

MIG/MAG wire feeder
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

370 A - 35 V
Type
350 A - 34 V
Fuel
30 A 400 A
70 V
Max welding rod
6 mm
Type
15 kVA - 400 V
Single Phase Power
10 kVA - 230 V
Single Phase Power
5 kVA - 48 V
26
diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
38 l
DIMENSIONS
Three Phase Power
RPM
Kubota D1105-E - 3 cyl. - 28 HP - 1123 cm3
LxWxH
Net Weight
265 g/KWh
AND
WEIGHT
1590 x 730 x 920 mm
450 kg
www.genset.it
MPM 15/400 SS-KA
New

Gen Set Options
Gen Set Features

lights in case of:
- battery charger failure - low fuel level
- low oil pressure
Built-in battery
Fuel level gauge - Hourmeter - Voltmeter
Low-High amps switch for a more accurate arc control
selection (30A 200A / 30A 400A)
Bunded tank to avoid polluting leakages on the ground
Central lifting eye

60 Hz version
(only available with KUBOTA D1005-E)
Gen Set Accessories
Noise Level
LWA 94

MIG/MAG wire feeder
(66 dB(A) at 10m)
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

370 A - 35 V
Type
350 A - 34 V
Fuel
30 A 400 A
70 V
Max welding rod
6 mm
Type
Kubota D1105-E - 3 cyl. - 28 HP - 1123 cm3

diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
60 l
DIMENSIONS
Three Phase Power
15 kVA - 400 V
LxWxH
Single Phase Power
10 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
www.genset.it
RPM
265 g/KWh
AND
WEIGHT
1600 x 840 x 1000 mm
565 kg
27
MPM 15/400 IC-L
New

Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
Built-in battery
Central lifting eye
Noise Level
LWA 99
(79 dB(A) at 4m)

60 Hz version
Gen Set Accessories

MIG/MAG wire feeder
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

400 A - 36 V
Type
Lombardini 9LD625-2 - 2 cyl. - 28,5 HP - 1248 cm3
350 A - 34 V
Fuel
diesel
30 A 400 A
70 V
Max welding rod
6 mm
Type
Cooling system
air
Starting system
electric
Fuel tank capacity
38 l
DIMENSIONS
Gen Set asynchronous brushless
Three Phase Power
15 kVA - 400 V
Single Phase Power
10 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
28
RPM
250 g/KWh
AND
WEIGHT
1400 x 630 x 1023 mm
434 kg
www.genset.it
MPM 16/400 I-VM

Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
Built-in battery
Emergency stop button
Low-High amps switch for a more accurate arc control
selection (30A 200A / 30 400A)
Central lifting eye

60 Hz version
Gen Set Accessories
Noise Level
LWA 98
(70 dB(A) at 10m)

MIG/MAG wire feeder
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

400 A - 36 V
Type
VM SUN 2105 - 2 cyl. - 29 HP - 1991 cm3
350 A - 34 V
Fuel
diesel
30 A 400 A
70 V
Max welding rod
8 mm
Type
Cooling system
air
Starting system
electric
Fuel tank capacity
48 l
DIMENSIONS
Three Phase Power
16 kVA - 400 V
Single Phase Power
12 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
www.genset.it
RPM
235 g/KWh
AND
WEIGHT
1780 x 860 x 900 mm
720 kg
29
MPM 15/420 S-LW
New

Gen Set Options
Gen Set Features

lights in case of:
- low fuel level
- low oil pressure
Built-in battery
Central lifting eye
Noise Level
LWA 98
(70 dB(A) at 10m)

60 Hz version
Gen Set Accessories

MIG/MAG wire feeder
DC WELDING
Duty Cycle @ 35%
Duty Cycle @ 60%

420 A - 36 V
Type
380 A - 35 V
Fuel
30 A 420 A
70 V
Max welding rod
6 mm
Type
Lombardini LDW1404 FOCS - 4 cyl. - 31,5 HP - 1372 cm3

diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
40 l
DIMENSIONS
Three Phase Power
15 kVA - 400 V
Single Phase Power
10 kVA - 230 V
Net Weight
Single Phase Power
5 kVA - 48 V
30
RPM
290 g/KWh
AND
WEIGHT
1510 x 730 x 860 mm
470 kg
www.genset.it
MPM 20/500 DZ

Gen Set Options
Gen Set Features
Processes: STICK / SCRATCH TIG / CAG

Oil pressure, head temperature, engine fan belt, fuel level
and battery charger warning lights
Built-in battery
circuit breaker
CARBON ARC GOUGING socket
Central lifting eye

20 kVA, 400VAC - 50Hz three phase output with ELCB
DAS, auto engine protection shutdown system with
warning lights in case of:
- low fuel level
- low oil pressure
- head temperature
- engine fan belt failure
Weld Voltmeter and Ammeter
60 Hz version
Gen Set Accessories

Four-wheels site tow undercarriage (GRT4W)
Four-wheels trailer with leaf springs and towing bar (GRT4WLB)
MIG/MAG wire feeder
Noise Level
LWA 103
DC WELDING
Duty Cycle @ 60%
Duty Cycle @ 100%

Type
Deutz F3L914 - 3 cyl. - 39 HP - 3236 cm3
400 A - 36 V
Fuel
diesel
30 A 500 A
70 V
Max welding rod
10 mm
Single Phase Power
www.genset.it
RPM
500 A - 40 V
Type
(75 dB(A) at 10m)

brushless
12 kVA - 230 V
Cooling system
air
Starting system
electric
Fuel tank capacity
70 l
DIMENSIONS
LxWxH
Net Weight
245 g/KWh
AND
WEIGHT
1590 x 800 x 1150 mm
920 kg
31
MPM 20/500 PS - MPM 20/500 I-PS

Single phase auxiliary power available Soundproof model (I-PS)
Gen Set Options
Gen Set Features

Processes: STICK / Scratch Start TIG / CAG
Oil pressure, coolant temperature, overspeed, fuel level
Built-in battery
Fuel level gauge
Central lifting eye
Gen Set Accessories

MIG/MAG wire feeder

- low fuel level
- low oil pressure
- overspeed
Cold weather starting aid
60 Hz version
Noise Level
PS version
I-PS version
DC WELDING
Duty Cycle @ 60%
Duty Cycle @ 100%
500 A - 40 V
Type
400 A - 36 V
Fuel
30 A 500 A
70 V
Max welding rod
10 mm
Single Phase Power
32
(73 dB(A) at 10m)

(70 dB(A) at 10m)
Type
LWA 101
LWA 98

brushless
12 kVA - 230 V
RPM
Perkins 3.152.4 - 3 cyl. - 36 HP - 2500 cm3

diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
76 l
DIMENSIONS
LxWxH
Net Weight:
230 g/KWh
AND
WEIGHT
2015 x 800 x 1150 mm
PS version
950 kg
I-PS version
970 kg
www.genset.it
MPM 20/600 DZ

Gen Set Options
Gen Set Features
Processes: STICK / SCRATCH TIG / CAG

Oil pressure, head temperature, engine fan belt, fuel level
Built-in battery
circuit breaker
Central lifting eye

- low fuel level
- low oil pressure
- head temperature
- engine fan belt failure
60 Hz version
Gen Set Accessories

MIG/MAG wire feeder
Noise Level
LWA 103
DC WELDING
Duty Cycle @ 40%
Duty Cycle @ 100%

Type
Deutz F4L914 - 4 cyl. - 53 HP - 3770 cm3
500 A - 40 V
Fuel
diesel
30 A 600 A
70 V
Max welding rod
10 mm
Single Phase Power
www.genset.it
RPM
600 A - 40 V
Type
(75 dB(A) at 10m)

brushless
12 kVA - 230 V
Cooling system
air
Starting system
electric
Fuel tank capacity
70 l
DIMENSIONS
LxWxH
Net Weight
215 g/KWh
AND
WEIGHT
1787 x 800 x 1150 mm
1055 kg
33
MPM 20/600 PS - MPM 20/600 I-PS

Single phase auxiliary power available Soundproof model (I-PS)
Gen Set Options
Gen Set Features

Processes: STICK / Scratch Start TIG / CAG
Oil pressure, coolant temperature, overspeed, fuel level
Built-in battery
Fuel level gauge
Central lifting eye
Gen Set Accessories

MIG/MAG wire feeder

- low fuel level
- low oil pressure
- overspeed
Cold weather starting aid
60 Hz version
Noise Level
PS version
I-PS version
DC WELDING
Duty Cycle @ 60%
Duty Cycle @ 100%
600 A - 40 V
Type
500 A - 40 V
Fuel
30 A 600 A
70 V
Max welding rod
10 mm
Single Phase Power

brushless
12 kVA - 230 V
RPM
Perkins 1004G NFE - 4 cyl. - 59 HP - 3937 cm3

diesel
Cooling system
water
Starting system
electric
Fuel tank capacity
76 l
DIMENSIONS
LxWxH
230 g/KWh
AND
WEIGHT
2015 x 800 x 1150 mm
Net Weight: PS version

I-PS version
34
(73 dB(A) at 10m)

(70 dB(A) at 10m)
Type
LWA 101
LWA 98
1090 kg
1110 kg
www.genset.it
SPECIAL MACHINES SERIES

Upon request Gen Set produces a
series of engine driven welders
specifically designed for tailor-made
applications.
Machines engineered and equipped
for pipelines construction, refinery
works, repairs on shipyards and offshores.
The range includes soundproofed and
non-soundproofed models in accordance with enforceable EC standards.
Our engine driven welders are fitted

with two, three or four standalone welding stations featuring
power ratings between 250A and
400A which are suitable to virtually
weld any kind of electrode.
Upon request, MIG/MAG and TIG
Lift Arc processes can be arranged.
The implementation of a three-phase
output (400V) and a single-phase
(230V), provided as standard equipment on all models, meets a wide
range of power supply requirements
on the workplace.
Perkins water-cooled engines and
Deutz air cooled engines, both running at 1500 rpm, have been supplied.
To complete our range of tailor-made

applications, Gen Set is proud to
introduce a welding generator,
fitted with two 400A stand-alone
stations, coupled to a 4WD tractor
to follow pipelines works in particularly rough areas.
For further information on our

products, please contact Gen
Sets sales offices directly
www.genset.it
35
TERMINOLOGY
ARC FORCE CONTROL
This device allows to get an adjustable additional
welding current during low voltage conditions
(short arc length) which helps to avoid electrode
sticking when short arc length is used.

Enables welding with MIG/MAG process and provides the connection between the machine and
the wire feed unit.
MIG/MAG wire feeder

Portable wire feeder unit for
MIG/MAG welding process.
The unit does not include:
connecting cables between the
welder and the wire feeder
gun
pressure reducer.
MIG/MAG wire feeder
DAS (auto engine shutdown system)

Its a special protection system which immediately stops the engine, avoiding any major failure,
in the following cases:
battery charger failure
high coolant temperature
low oil pressure
low fuel level.
A signal lamp indicates the specific failure.

Safety protection device which cuts off the current supply in dangerous situations (i.e. electrical insulation loss of a unit connected to the
generator).
www.genset.it
37
TERMINOLOGY
P-BOX
This portable unit (6,5 kg) permits paralleling of
two equal power engine driven welders doubling
the welding current output.
Equipped with welding voltmeter and ammeter
and connecting cables.
P-BOX
Remote control kit

Remote hand amperage control, supplied with 20
m cable and plug.
Remote control kit

Electrically operated device to
reverse polarity, suitable for
electronic control welders up to
500 Amps, including:
polarity switch box;
connecting cables between
the welder and the polarity
switch box;
remote control, with 20 m
cable and plug, composed of:
welding current potentiometer;
polarity selector switch with warning light.
Certified Spark Arrestor Muffler

Safety device which stops sparks emission from
the muffler. Recommended for use in particular
areas such as refineries or petrol-chemical storage areas.
38
www.genset.it
TERMINOLOGY
Trolley, wheelbarrow type
Different models of trolleys, with two wheels and
handles are available.
Welding cables with accessories

Trolley
The kit includes:
one dark screen;

one transparent glass;
one chipping hammer;
one steel brush;
one electrode holder with 5 m cable, sect. 25
mm2, and one ground clamp with 3 m cable,
sect. 25 mm2 (type ST 25) and/or
sect. 35 mm2 (type ST 35) and/or
sect. 50 mm2 (type ST
50).
Welding cables with accessories
www.genset.it
39
TERMINOLOGY
Gen Set site tow undercarriages
(max 10-12 km/h)
Three types of Gen Set trailers are available for
off road use only:
1)
GRT 2W: two-wheels site tow undercarriage
Either factory assembled or supplied in kit
includes:
heavy duty axle with ball bearing hubs
with 2 pneumatic wheels;
towing bar with lunette eye;
levelling jack stand or steering jack wheel;
mounting hardware.
2)
GRT 4W: four-wheels site tow undercarriage
includes:
rear heavy duty axle with ball bearing hubs
with drum brake and 2 pneumatic wheels;
front heavy duty axle with ball bearing
hubs with 2 pneumatic wheels, steering
parking brake assembly with cables (to be
mounted on machine's frame);
mounting hardware.
3)
GRT 4WLB, four-wheels site tow
undercarriage with leaf springs and
towing bar
includes:
rear heavy duty axle with ball bearing
hubs, 2 pneumatic wheels, 2 leaf springs
and drum brake;
front heavy duty axle with ball bearing
hubs, steering towing bar on ball steering
joints, 2 pneumatic wheels and 2 leaf
springs;
parking brake assembly;
mounting hardware.
40
GRT 2W
GRT 4W
GRT 4WLB
www.genset.it

GenSet Eng Part I

Uploaded by

Copyright:

Available Formats

GenSet Eng Part I

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GenSet Eng Part I

Uploaded by

Copyright:

Available Formats

What is the company's area of expertise?

What is the company's area of expertise?

What certifications has the company achieved?

What certifications has the company achieved?

THE COMPANY

CUSTOMER ORIENTED POLICY

DESIGN AND MANUFACTURING

Structural components are produced on the

MPM 5/170 I-AC/H

- 170 A AC - Petrol Engine

MPM 5/170 I-CX/H

- 170 A DC - Petrol Engine

MPM 5/180 I-EL/H

- 180 A DC - Petrol Engine

MPM 5/180 I-D/AE-Y - 170 A DC - Diesel Engine 3000 rpm

MPM 5/180 I-D/AE

MPM 5/190 I-EB/H

MPM 7/265 I-DR/EL

- 260 A DC - Diesel Engine 3000 rpm

MPM 8/270 I-EL/H

- 270 A DC - Petrol Engine

MPM 8/300 IC-EL

- 300 A DC - Soundproof - Diesel Engine 3000 rpm

MPM 8/300 I-KA

- 300 A DC - Soundproof - Diesel Engine 3000 rpm

MPM 8/300 SS-KA

- 300 A DC - Super Silenced - Diesel Engine 3000 rpm

MPM 8/320 S-LW

- 320 A DC - Soundproof - Diesel Engine 3000 rpm

MPM 15/400 I-KA

- 400 A DC - Soundproof - Diesel Engine 3000 rpm

MPM 15/400 SS-KA

- 400 A DC - Super Silenced - Diesel Engine 3000 rpm

MPM 15/400 IC-L

- 400 A DC - Soundproof - Diesel Engine 3000 rpm

MPM 16/400 I-VM

- 400 A DC - Soundproof - Diesel Engine 1500 rpm

MPM 15/420 S-LW

- 420 A DC - Soundproof - Diesel Engine 3000 rpm

- 500 A DC - Diesel Engine 1500 rpm

- 170 A DC - Diesel Engine 3000 rpm

- 190 A DC - Petrol Engine

- 500 A DC - Diesel Engine 1500 rpm

MPM 20/500 I-PS

- 500 A DC - Soundproof - Diesel Engine 1500 rpm

- 600 A DC - Diesel Engine 1500 rpm

- 600 A DC - Diesel Engine 1500 rpm

MPM 20/600 I-PS

- 600 A DC - Soundproof - Diesel Engine 1500 rpm

SPECIAL MACHINES SERIES

GENERATING SETS (MG

- 230 V single phase (1 kVA) - Super Silenced - Petrol Engine

- 230 V single phase (2 kVA) - Petrol Engine

- 230 V single phase (3 kVA) - Petrol Engine

- 230 V single phase (3 kVA) - Petrol Engine - Electric Start

- 230 V single phase (3 kVA) - Petrol Engine

- 230 V single phase (5 kVA) - Petrol Engine

- 230 V single phase (5 kVA) - Petrol Engine

- 230 V single phase (5 kVA) - Petrol Engine - Electric Start