Sharp Is A Pioneer in Photovoltaics Sharp Solar Modules Have Set Standards For Over 50 Years

NA-ExxxL5
xxx = 140|135|130|125 W
Frameless thin film modules
Sharp is a pioneer in photovoltaics /This is Why Sharp solar

modules have set standards for over 50 years.
Product warranty and performance guarantee

Each product has been carefully manufactured and subjected to
operating tests during final inspection. Each product is backed
up with a:
5-year product guarantee
10-year performance guarantee on 90% of the
minimum power output
Up to 25-year performance guarantee on 80% of the
minimum power output
For more detailed information, please refer to the terms and
condition of the guarantee. End users are required to r egister
their modules in order for the product and power output
guarantee to be valid.
Certificates and approvals

All modules are tested and certified according to
IEC/EN 61646 and IEC/EN 61730, Application class A
Safety class II / CE, Class E in accordance with EN13501-1
IEC61701 ed2.0 severity 6 salt mist corrosion testing
The manufacturing facility is certified based on
ISO 9001:2008, ISO 14001:2004 and OHSAS18001:2007
As at: May 2014
Innovations from a photovoltaic pioneer

As a solar specialist with more than 50 years experience in
photovoltaics (PV), Sharp makes significant contributions to
groundbreaking progress in solar technology. The NAE series
of thin-film photovoltaic modules consists of an amorphous
and a microcrystalline silicon layer. This microamorphous
tandem structure not only absorbs visible light but also the
invisible portion of the solar spectrum. This makes especially
efficient use of solar energy. All module types of the Sharp
NA Series offer optimum system integration, in terms of both
technology and economy, and are suitable for installations in
grid-connected PV systems.
Product features
Tandem structure with an amorphous and a
microcrystalline silicon layer offering a stabilised
module efficiency of up to 10%
Two glass layers laminated with a high-performance
vapour barrier encapsulant
Attractive design allowing wide range of applications
Low temperature coefficients enabling higher energy
yields per watt at high temperatures
Less dirt accumulation due to frameless design
Installation in landscape or portrait mode
One bypass diode integrated in the junction box
No Cadmium RoHS compliant
Made in Italy
Nominal values
Maximum power
Initial values
NA-E140L5
NA-E135L5
NA-E130L5
NA-E125L5
NA-E140L5
NA-E135L5
NA-E130L5
NA-E125L5
140
135
130
125
160.9
155.2
149.5
143.7
Pmax
Wp
Open-circuit voltage
Voc
61.8
61.3
60.4
59.7
62.5
61.8
61.1
60.4
Short-circuit current
Isc
3.45
3.41
3.41
3.37
3.53
3.51
3.47
3.43
Voltage at point of maximum power
Vmpp
48.5
47.0
46.1
45.5
50.8
49.3
48.7
48.3
Current at point of maximum power
Impp
2.89
2.88
2.82
2.75
3.17
3.15
3.07
2.98
Module efficiency
10.0
9.6
9.3
8.9
A
%
STC = Standard Test Conditions: irradiance 1,000 W/m, AM 1.5, cell temperature 25C. Rated electrical characteristics of Isc and Voc are within 10% of the indicated values and +7/2% of Pmax. The initial values
are approx. 15% higher than the nominal (stabilised) values and will decline within the first weeks of operation. Afterwards the power output will stabilize around the nominal value according to the seasonal changes.
ELECTRICAL DATA (AT NOCT)
Maximum power
Pmax
NA-E140L5
NA-E135L5
NA-E130L5
NA-E125L5
106.7
102.4
98.6
94.8
Wp
Open-circuit voltage
Voc
57.2
56.8
55.9
55.3
Short-circuit current
Isc
2.84
2.76
2.76
2.73
Voltage at point of maximum power
Vmpp
46.0
44.0
43.2
42.6
Current at point of maximum power
Impp
2.32
2.33
2.29
2.23
Nominal operating cell temperature
NOCT
46
46
46
46
NOCT: Module operating temperature at 800 W/m irradiance, air temperature of 20C, wind speed of 1 m/s.
LIMIT VALUES
MECHANICAL DATA
TEMPERATURE COEFFICIENT
Maximum system voltage
1,000 V DC
Length
1,402 mm
Pmax
0.24%/C
Over-current protection
6A
Width
1,001 mm
Voc
0.30%/C
Temperature range
40 to +90C
Depth (including junction box = 23.3 mm)
Isc
+0.07%/C
Maximum mechanical load
2,400 N/m
Weight
CHARACTERISTIC CURVES NA-E135L5
6.7 mm
24 kg
REAR VIEW
Characteristic curves: current/power vs. voltage (cell temperature: 25C)
2.0
100
1.5
1.0
600 (W/m)
80
400 (W/m)
60
30
+4.0
120
800 (W/m)
2.5
1,001 2.0

Current (A)
3.0
140
1,000 (W/m)
Power (W)
3.5
695
40
200 (W/m)
20
0.5
0
0
0 10
20
30
40
50
60
Current vs. voltage

Power vs. voltage
+4.0
1,402 2.0
GENERAL DATA
NOTE
Cells
Tandem cell of amorphous (-Si) and microcrystalline (c-Si) silicon
Front glass | rear glass
low iron non tempered glass | tempered glass
Connection box
PPE/PPO resin, IP65 rating, 1 bypass diode included
Cable
2.5 mm, length 950 mm
The content of this document is a short product

description and does not contain all important
information for the user. Please refer to the full
specification for each module, follow the instructions
on using thin-film PV modules to avoid white spots
and follow all instructions in the installation manual
(e.g. minus pole grounding, protection with blocking
diodes/fuses). Before installing the photovoltaic
modules, please make sure you have received all
documents.
Connector
Modules per palette
SMK (Type CCT9901-2352F/2452F), IP67 rating

To extend the module connection leads, only use SMK connector under the same series
or MultiContactAG MC4 connector (PV-KST/KBT4)
40pcs
The reference image on the front page shows a 340 kWp system in Eastern Germany.Note: Technical data is subject to change without prior notice. Before using Sharp products, please request the latest data sheets from Sharp. Sharp accepts no
responsibility for damage to devices which have been equipped with Sharp products on the basis of unverified information. The specifications may deviate slightly and are not guaranteed. This module should not be directly connected to a load.
ELECTRICAL DATA (AT STC)
www.sharp.eu/solar
Local responsibility:
Benelux [email protected]
France [email protected]
Germany [email protected]
Spain & Portugal [email protected]
United Kingdom [email protected]
Other countries [email protected]
SolarNAE_L5_E0514
Sharp Energy Solutions Europe a division of Sharp Electronics (Europe) Ltd. Sonninstrasse 3, 20097 Hamburg, Germany Tel: +49(0)40/2376-0 Fax: +49(0)40/2376-2193

Sharp Is A Pioneer in Photovoltaics Sharp Solar Modules Have Set Standards For Over 50 Years

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Sharp Is A Pioneer in Photovoltaics Sharp Solar Modules Have Set Standards For Over 50 Years

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sharp Is A Pioneer in Photovoltaics Sharp Solar Modules Have Set Standards For Over 50 Years

Uploaded by

Copyright:

Available Formats

NA-ExxxL5

Sharp is a pioneer in photovoltaics /This is Why Sharp solar

Product warranty and performance guarantee

Certificates and approvals

As at: May 2014

Innovations from a photovoltaic pioneer

Voltage at point of maximum power

Current at point of maximum power

ELECTRICAL DATA (AT NOCT)

Voltage at point of maximum power

Current at point of maximum power

Nominal operating cell temperature

Maximum system voltage

Depth (including junction box = 23.3 mm)

Maximum mechanical load

CHARACTERISTIC CURVES NA-E135L5

Characteristic curves: current/power vs. voltage (cell temperature: 25C)

Current vs. voltage

Tandem cell of amorphous (-Si) and microcrystalline (c-Si) silicon

Front glass | rear glass

low iron non tempered glass | tempered glass

PPE/PPO resin, IP65 rating, 1 bypass diode included

2.5 mm, length 950 mm

The content of this document is a short product

SMK (Type CCT9901-2352F/2452F), IP67 rating

ELECTRICAL DATA (AT STC)

You might also like