Scribd
Upload
23 views

Problem Set 2: Deliverables

Complete CATIA tutorials on sketch work modes and advanced commands, and create a 3D model of an exhaust cam with at least 8 reference points to define a cam lift of 0.4 inches. Save screenshots of the tutorials and an isometric image of the cam in a Word document, along with answers to questions about the cam creation method and the function of Project 3D Elements.

Uploaded by

Md.tanvir Ibny Gias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views

Problem Set 2: Deliverables

Complete CATIA tutorials on sketch work modes and advanced commands, and create a 3D model of an exhaust cam with at least 8 reference points to define a cam lift of 0.4 inches. Save screenshots of the tutorials and an isometric image of the cam in a Word document, along with answers to questions about the cam creation method and the function of Project 3D Elements.

Uploaded by

Md.tanvir Ibny Gias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Problem Set 2

ME 421
Advanced CAD

Complete the following tutorials: (PDFs can be found at


S:\engineering\senior design\CATIA Course\Class Materials\PS2\Post
Class, they can also be found in the classroom textbooks)
o Tutorial 2.2: Sketch Work Modes
o Tutorial 3.4: Advanced Commands
Using the Exhaust Cam image from the website, sketch and pad out a
cam
o Use a base circle of .4 inches in diameter to reference the lift of
the cam
o Use at least 8 reference points; make sure everything is fully
defined
o Finished product will look somewhat like this:

o Save isometric image in Word


o For help, see Tutorial 2.7 fromIntroduction to CATIA V5.

Deliverables:
Save a single word document in your personal folder under
Submitted Problem Sets with the following:

Screen captures of the final products of the following tutorials


o Tutorial 2.2: Sketch Work Modes
o Tutorial 3.4: Advanced Commands
Answer the following questions
o Describe your method of creating the exhaust cam.
o What does the function Project 3D Elements allow the user to
do?

You might also like