Gep22 4

GEP22-4
Diesel Generator Set

Exclusively from your Caterpillar dealer
Output Ratings
Generating Set Model
380-415V,50Hz
220/127V, 60 Hz
Prime*
Standby*
20.0 kVA
22.0 kVA
16.0 kW
17.6 kW
22.5 kVA
25.0 kVA
18.0 kW
20.0 kW
* Refer to ratings definitions on page 4.

Ratings at 0.8 power factor.
Technical Data
Engine Make & Model:
Perkins 404D-22G
Alternator Model:
LL1014N
Base Frame Type:
Heavy Duty Fabricated Steel
Circuit Breaker Type:
3 Pole MCB
Frequency:
50 Hz
60 Hz
Engine Speed: RPM
1500
1800
Fuel Tank Capacity: litres (US gal)
45 (11.9)
Fuel Consumption, Prime: l/hr (US gal/hr)
5.3 (1.4)
5.8 (1.5)
Fuel Consumption, Standby : l/hr (US gal/hr)
5.9 (1.6)
6.5 (1.7)
Engine Techncial Data

Physical Data
Lubrication system
Perkins
Manufacturer:
Oil Filter Type:
Spin-On, Full Flow
Model:
404D-22G
Total Oil Capacity l (US gal):
No. of Cylinders/Alignment:
4 / In Line
Oil Pan l (US gal):
4 Stroke
Cycle:
Induction:
Naturally Aspirated
Cooling Method:
10.6 (2.8)
8.9 (2.4)
Oil Type:
AP1CH4 15W-40
Cooling Method:
N/A
Water
Governing Type:
Mechanical
Governing Class:
ISO 8528 G2
23.3:1
Compression Ratio:
Displacement: l (cu.in)
2.2 (135.2)
Bore/Stroke: mm (in)
84.0 (3.3)/100.0 (3.9)
Moment of Inertia: kg m (lb. in)
2.72 (9308)
-Battery Charger Amps:
65
Weight: kg (lb) - Dry:
242 (534)
- Wet:
251 (554)
50 Hz
60 Hz
Air Filter Type:
Replaceable Element
-Prime:
Regenerative Power: kW
-Standby:
1.5 (51)
1.7 (61)
-Prime:
1.5 (51)
1.7 (61)
Max. Combustion Air Intake

Restriction: kPa (in H2O)
3.0 (12.0)
3.0 (12.0)
33.0 (1165)
41.4 (1462)
Radiator Cooling Air Flow:

m/min (cfm)
External Restriction to
Cooling Air Flow: Pa (in H2O)
Cooling System
125 (0.5)
125 (0.5)
Water Pump Type:
24.3 (33.0)
18.7 (25.0)
22.0 (30.0)
743.0 (107.8)
731.0 (106.0)
675.0 (97.9)
662.0 (96.0)
5.6
7.2
Replaceable Element
Recommended Fuel:
Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr)
110%
Load
100%
Load
75%
Load
50%
Load
50 Hz
5.9 (1.6)
5.3 (1.4)
3.9 (1.0)
2.9 (0.8)
60 Hz
6.5 (1.7)
5.8 (1.5)
4.5 (1.2)
3.3 (0.9)
50 Hz
5.9 (1.6)
4.3 (1.1)
3.0 (0.8)
60 Hz
6.5 (1.7)
4.9 (1.3)
3.6 (1.0)
Prime
Standby
(based on diesel fuel with a specific gravity of 0.85 and conforming to

BS2869, Class A2)
50 Hz
60 Hz
6.5 (1.7)
6.5 (1.7)
50 Hz
Exhaust System
Centrifugal
Silencer Noise Reduction
263-0765 (1)
Pressure Drop Across

Silencer System: kPa (in Hg)
Heat Rejected to Water &

Lube Oil: kW (Btu/min)
60 Hz
Level 1
Silencer Type:
Cooling System Capacity:

l (US gal)
20.6 (28.0)
Fuel System
Combustion Air Flow:

m/min (cfm)
1800
BMEP: kPa (psi)
Fuel Filter Type:
Air System
1500
-Prime:
-Standby:
12/Negative
60 Hz
Engine Speed: RPM

Gross Engine Power: kW (hp)
-Standby:
Engine Electrical System:

-Voltage/Ground:
50 Hz
Performance
0.70 (0.207) 1.60 (0.472)
Silencer Noise Reduction

Level: dB
-Standby:
21.6 (1228)
24.2 (1376)
-Prime:
19.6 (1115)
22.2 (1262)
Heat Radiation to Room:

kW (Btu/min)
-Standby:
4.4 (250)
4.6 (262)
Exhaust Gas Flow:
-Prime:
3.5 (199)
3.8 (216)
m/min (cfm)
0.2 (0.3)
0.4 (0.5)
Radiator Fan Load: kW (hp)
28
21
10.0 (3.0)
10.0 (3.0)
-Standby:
4.5 (159)
4.8 (168)
-Prime:
4.1 (145)
4.3 (153)
-Standby:
481 (898)
510 (950)
-Prime:
437 (819)
440 (824)
Max. Allowable Back

Pressure: kPa (in. Hg)
Exhaust Gas Temperature: C (F)

m/min (cfm)
Cooling system designed to operate in ambient conditions up to 50C
(122F). Contact your local Olympian dealer for power ratings at specific
site conditions.
Consult your Olympian representative for more information
Alternator Performance Data

50 Hz
Data Item
60 Hz
415/240V
400/230V
380/220V
46
43
39
43
300
300
300
300
300
300
300
300
300
Xd
1.740
1.880
2.080
2.090
X'd
0.110
0.120
0.130
0.130
X''d
0.053
0.058
0.064
0.064
Motor Starting
Capability* kVA
Short Circuit
Capacity** %
220/127V
Reactances:
Per Unit
Reactances shown are applicable to standby ratings.

* Based on 30% voltage dip.
** With optional Permanent Magnet generator or AREP excitation.
Alternator Technical Data

Physical Data
Manufacturer:
Model:
Operating Data
OLYMPIAN
LL1014N
Overspeed: RPM
2250
Voltage Regulation (steady state) (%):
+/- 0.5
No. of Bearings:
Wave Form NEMA = TIF:
Insulation Class:
Wave Form IEC = THF:
2.0%
Total Harmonic Content LL/LN:
4.0%
Winding Pitch - Code:

Wires:
Ingress Protection Rating:
Excitation System:
AVR Model:
2/3 - 6
12
IP23
SHUNT
R250
Radio Interference:
50
Supression is in line with European

Standard EN61000-6
Radiant Heat: kW (Btu/min)

-50 Hz:
2.7 (154)
-60 Hz:
2.9 (165)
Consult your Olympian representative for more information
Technical Data
3 Phase Ratings and Performance at 50 Hz, 1500 RPM
Voltage
3 Phase Ratings and Performance at 60 Hz, 1800 RPM
Voltage
Standby
Prime
kVA
kW
kVA
kW
415/240V
20.0
16.0
22.0
17.6
400/230V
20.0
16.0
22.0
17.6
380/220V
20.0
16.0
22.0
17.6
220/127V
Prime
Standby
kVA
kW
kVA
kW
22.5
18.0
25.0
20.0
Weights & Dimensions

Weights: kg (lb)
Dimensions: mm (in)
Net (+ lube oil)
460 (1014)
Length
1320 (52.0)
Wet (+ lube oil & coolant)
467 (1030)
Width
552 (21.7)
Fuel, lube oil & coolant
505 (1113)
Height
1179 (46.4)
Note: General configuration not to be used

for installation.
See general dimension
drawings for detail.
Definitions
General Data
Standby Rating
Documents
These ratings are applicable for supplying continuous electrical

power (at variable load) in the event of a utility power failure. No
overload is permitted on these ratings. The alternator on this model
is peak continuous rated (as defined in ISO 8528-3).
A full set of operation and maintenance manuals and circuit wiring

diagrams.
Prime Rating
BS4999, BS5000, BSEN60034, BSEN61000, IEC60034.
These ratings are applicable for supplying continuous electrical

power (at variable load) in lieu of commercially purchased power.
There is no limitation to the annual hours of operation and this
model can supply 10% overload power for 1 hour in 12 hours.
Warranty
Quality Standards
All equipment carries full manufacturer's warranty.
Standard Reference Conditions

Note: Standard reference conditions 25C (77F) air inlet temp,
100m (328ft) A.S.L. 30% relative humidity. Fuel consumption data
at full load with diesel fuel with specific gravity of 0.85 and
conforming to BS2869: 1998, Class A2.
Market: International
LEHF3044-08 (04/09)
Information contained in this publication may be considered confidential.

Discretion is recommended when distributing.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos and ''Caterpillar Yellow'', as well as corporate and product
identity used herein, are trademarks of Caterpillar and may not be used without permission.
www.CAT-ElectricPower.com
2009 Caterpillar
All rights reserved.
Printed in U.S.A.

Gep22 4

Uploaded by

Copyright:

Available Formats

Gep22 4

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gep22 4

Uploaded by

Copyright:

Available Formats

GEP22-4

Diesel Generator Set

* Refer to ratings definitions on page 4.

Base Frame Type:

Heavy Duty Fabricated Steel

Circuit Breaker Type:

Engine Speed: RPM

Fuel Tank Capacity: litres (US gal)

Fuel Consumption, Prime: l/hr (US gal/hr)

Fuel Consumption, Standby : l/hr (US gal/hr)

Engine Techncial Data

Oil Filter Type:

Spin-On, Full Flow

Total Oil Capacity l (US gal):

Oil Pan l (US gal):

84.0 (3.3)/100.0 (3.9)

Moment of Inertia: kg m (lb. in)

-Battery Charger Amps:

Weight: kg (lb) - Dry:

Air Filter Type:

Max. Combustion Air Intake

Radiator Cooling Air Flow:

Water Pump Type:

(based on diesel fuel with a specific gravity of 0.85 and conforming to

Silencer Noise Reduction

Pressure Drop Across

Heat Rejected to Water &

Cooling System Capacity:

Combustion Air Flow:

BMEP: kPa (psi)

Fuel Filter Type:

Engine Speed: RPM

Engine Electrical System:

0.70 (0.207) 1.60 (0.472)

Silencer Noise Reduction

Heat Radiation to Room:

Exhaust Gas Flow:

Radiator Fan Load: kW (hp)

Max. Allowable Back

Exhaust Gas Temperature: C (F)

Consult your Olympian representative for more information

Alternator Performance Data

Reactances shown are applicable to standby ratings.

Alternator Technical Data

Voltage Regulation (steady state) (%):

Wave Form NEMA = TIF:

Wave Form IEC = THF:

Total Harmonic Content LL/LN:

Winding Pitch - Code:

Supression is in line with European

Radiant Heat: kW (Btu/min)

Consult your Olympian representative for more information

3 Phase Ratings and Performance at 50 Hz, 1500 RPM

3 Phase Ratings and Performance at 60 Hz, 1800 RPM

Weights & Dimensions

Net (+ lube oil)

Wet (+ lube oil & coolant)

Fuel, lube oil & coolant

Note: General configuration not to be used