Eas - Signed (Ibu TW)
Eas - Signed (Ibu TW)
Eas - Signed (Ibu TW)
Model EAS-2C_.
Standards
Compliance
Filtration
Electrical Safety
* Please refer to the specifications table on page 4,6 & 8 for the model listing.
Main Features
High velocity shower jets in excess of 20 m/s ensure efficient scrubbing action to
remove particulate matter.
Operating modes can be programmed in the field.
Microprocessor controller supervises all functions.
Mini-pleated HEPA filtration achieves > 99.99% typical efficiency at 0.3 micron
particles.
A disposable pre-filter with 85% arrestance extends the life of the main filter.
An emergency stop button is mounted on both sides of the shower.
Indicator lights mounted on both sides of the air shower exterior regulate traffic
flow in and out of the cleanroom.
Permanently lubricated direct drive centrifugal blowers are used in conjunction
with stainless steel air nozzles.
Airflow
Door
EAS (A-Series)
Single Sided
Single Leaf
EAS (B-Series)
Double Sided
Single Leaf
EAS (C-Series)
Double Sided
Double Leaf
Introduction
Air Showers are self contained chambers
installed at entrances to cleanrooms and
other controlled environments. They
minimize particulate matter entering
or exiting the clean space. Personnel
and materials entering or exiting the
controlled environment are scrubbed
by high velocity HEPA-filtered air jets with
velocities of 20-22m/s (4000-4300fpm).
Contaminated air is then drawn through
the base within the unit, filtered and
recirculated.
Esco is a leader in air showers for demanding
applications in the micro-electronics,
semiconductors, pharmaceutical, spray-
15000
Air Showers
Efficiency (%)
100
80
10000
60
10
15
20
25
30
35
Air Showers
Efficiency (%)
40
0.5
m
5000
ab
ov
ab
0.
1.4
ab
ab
ab
ove
20
ov
ov
ove
Particles (m)
20
0.3
Esco EAS-1B1
0.5
Competitor H
1.0
3.0
5.0
10.0
ULPA-filtered air
HEPA Filter
er
Grey Room
Air Show
Air Show
Clean Room
Grey Room
er
er
Air Show
Clean Room
Grey Room
er
No Show
it
Direct Ex
Clean Room
er
Air Show
One-Way
Two-Way One-Way
Two-Way
HEPA Filtration
System
Door
Key Features
Esco Air Shower filters meet the IESTRP-CC001.3 recommended practice for
HEPA performance (USA), and EN 1822
for H13 performance (EU).
Light Diffuser
EAS-1A_
EAS-2A_
EAS-3A_
356/ Hr
351/ Hr
Air Change
371/ Hr
Number of Nozzles
12
2-3
4-6
8-12
15-23
Filtration Efficiency
Filtration Elements
Fluorescent Lamp
17 W x 2
Electrical
During Standby
EAS-1A1
EAS-2A1
EAS-3A1
EAS-1A2
EAS-2A2
EAS-3A2
EAS-1A3
EAS-2A3
EAS-3A3
N/A
Pallet A
N/A
Pallet B
N/A
Pallet C
N/A
N/A
Pallet A
Pallet B
N/A
N/A
Module Form
N/A
Unassembled
Assembled (W x D x H)
Module Form
(W x D x H)
Unassembled
(W x D x H)
Assembled
Shipping Volume,
Maximum
17 W x 6
During Operation
Net Weight
Shipping
Dimensions,
Maximum
(W x D x H)*
17 W x 4
1.5 mm/ 0.06"/18 electro-galvanised steel / White oven-baked epoxy powder-coated finish
Gross Weight
18
Module Form
Unassembled
Unit B
Top Frame A
Cable Connector
Top Frame B
Stainless Steel Floor
Unit A
Base Frame B
Base Frame A
Door
Pallet B
Pallet A
Module B1
Module A1
Pallet A
Module B2
Module A2
Pallet B
EAS-2A_
EAS-3A_
1
2
6
7
8
4
9
5
1. Fluorescent lamp
2. Esco microprocessor system
3. Nozzles
4. Door
5. Pre-filter
6. Indicator light
7. Emergency switch
8. HEPA filter
9. Blower
2.
3.
4.
5.
6.
7.
8.
EAS-1B_
EAS-2B_
EAS-3B_
712/ Hr
702/ Hr
Air Change
743/ Hr
Number of Nozzles
12
24
2-3
4-6
8-12
15-23
Filtration Efficiency
Filtration Elements
Fluorescent Lamp
17 W x 2
17 W x 4
17 W x 6
1.5 mm/ 0.06"/18 electro-galvanised steel / White oven-baked epoxy powder-coated finish
During Operation
During Standby
EAS-1B1
EAS-2B1
EAS-3B1
EAS-1B2
EAS-2B2
EAS-3B2
EAS-1B3
EAS-2B3
EAS-3B3
Gross Weight
Net Weight
N/A
Pallet A
N/A
Pallet B
N/A
Pallet C
N/A
N/A
Pallet A
Pallet B
N/A
N/A
Module Form
N/A
Unassembled
Max. Power
Consumption,
Current, BTU/Hr
Electrical
10
36
Assembled (W x D x H)
Shipping
Dimensions,
Maximum
(W x D x H)**
Module Form
(W x D x H)
Unassembled
(W x D x H)
Assembled
Shipping Volume,
Maximum
Module Form
Unassembled
Unit B
Top Frame B
Stainless Steel Floor
Cable Connector
Top Frame A
Base Frame B
Base Frame A
Module B2
Unit A
Pallet B
Pallet B
Pallet A
Module B1
Module A2
Module A1
Pallet A
EAS-2B_
EAS-3B_
1
2
6
11
8
4
9
5
1. Fluorescent lamp
2. Esco microprocessor system
3. Nozzles
4. Door
5. Pre-filter
6. Indicator light
7. Emergency switch
8. HEPA filter
9. Blower
2.
3.
4.
EAS-2C_
EAS-3C_
External Dimensions (W x D x H)
Air Change
354/ Hr
349/ Hr
Number of Nozzles
24
36
4-6
8-12
15-23
Filtration Efficiency
Filtration Elements
Fluorescent Lamp
17 W x 8
Electrical
17 W x 12
1.5 mm/ 0.06"/18 electro-galvanised steel / White oven-baked epoxy powder-coated finish
During Operation
EAS-2C1
EAS-3C1
EAS-2C2
EAS-3C2
During Standby
12
2-3
EAS-2C3
EAS-3C3
Gross Weight
Net Weight
N/A
Pallet A
Pallet B
Pallet C
N/A
Pallet A
Pallet B
Assembled (W x D x H)
Shipping
Dimensions,
Maximum
(W x D x H)**
Module Form
(W x D x H)
Unassembled
(W x D x H)
Shipping Volume,
Maximum
Assembled
N/A
Module Form
Unassembled
Module Form
Unassembled
Unit B
Top Frame B
Stainless Steel Floor
Cable Connector
Top Frame A
Base Frame B
Base Frame A
Module B2
Unit A
Pallet B
Pallet B
Pallet A
Module B1
Module A2
Module A1
Pallet A
8
4
9
5
EAS-3C_
1
1. Fluorescent lamp
2. Esco microprocessor system
3. Nozzles
4. Door
5. Pre-filter
6. Indicator light
7. Emergency switch
8. HEPA filter
9. Blower
2.
13
ART Equipment
Biological Safety Cabinets
CO2 Incubators
Compounding Pharmacy Equipment
Containment / Pharma Products
Ductless Fume Hoods
Freeze Dryer
Lab Animal Research Products
Laboratory Fume Hoods
Laboratory Ovens and Incubators
Laminar Flow Clean Benches
PCR Cabinets
PCR Thermal Cyclers
Powder Weighing Balance Enclosures
Ultra-low Freezers
The Esco Group of Companies is a global life sciences tools provider with sales in over 100 countries. The group is active in
lab equipment, pharma equipment and medical devices. Manufacturing facilities are located in Asia and Europe. R&D is
conducted worldwide spanning the US, Europe and Asia. Sales, service and marketing subsidiaries are located in 12 major
markets including the US, UK, Singapore, Japan, China and India. Regional distribution centers are located in the US, UK,
and Singapore.
9010053_Cleanroom_EAS_Brochure_A4_vC_Apr-2013
Esco can accept no responsibility for possible errors in catalogues, brochures and other printed materials. Esco reserves the right to alter its
products and specifications without notice. All trademarks and logotypes in this material are the property of Esco and the respective companies.
escoglobal com
LIVE SUPPORT