Scribd Logo
Upload

Welcome to Scribd!

  • 80 views

    Civl 2120 Ch3 Qs

    Uploaded by

    Tina Chen
    This document contains 8 homework problems related to mechanics of materials and determining stresses in shafts: 1) Calculate maximum shear stresses in 3 shafts (AB, BC, CD) from a torque of 2.8 kN-m. 2) Determine the largest allowable torque on a motor shaft given shear stress limits and shaft dimensions. 3) Derive an equation to calculate maximum shear stress in a rod given an applied force and displacement. 4) Calculate shear stresses in a composite shaft under a 600 N-m torque load. 5) Determine shear stresses and rotation angles in 2 shafts under an 80 N-m torque. 6) Derive an equation for angle of twist in a taper

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Civl 2120 Ch3 Qs

    Uploaded by

    Tina Chen
    80 views2 pages
    This document contains 8 homework problems related to mechanics of materials and determining stresses in shafts: 1) Calculate maximum shear stresses in 3 shafts (AB, BC, CD) from a torque of 2.8 kN-m. 2) Determine the largest allowable torque on a motor shaft given shear stress limits and shaft dimensions. 3) Derive an equation to calculate maximum shear stress in a rod given an applied force and displacement. 4) Calculate shear stresses in a composite shaft under a 600 N-m torque load. 5) Determine shear stresses and rotation angles in 2 shafts under an 80 N-m torque. 6) Derive an equation for angle of twist in a taper

    Original Description:

    HKUST CIVL 2120

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 8 homework problems related to mechanics of materials and determining stresses in shafts: 1) Calculate maximum shear stresses in 3 shafts (AB, BC, CD) from a torque of 2.8 kN-m. 2) Determine the largest allowable torque on a motor shaft given shear stress limits and shaft dimensions. 3) Derive an equation to calculate maximum shear stress in a rod given an applied force and displacement. 4) Calculate shear stresses in a composite shaft under a 600 N-m torque load. 5) Determine shear stresses and rotation angles in 2 shafts under an 80 N-m torque. 6) Derive an equation for angle of twist in a taper

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    80 views2 pages

    Civl 2120 Ch3 Qs

    Uploaded by

    Tina Chen
    This document contains 8 homework problems related to mechanics of materials and determining stresses in shafts: 1) Calculate maximum shear stresses in 3 shafts (AB, BC, CD) from a torque of 2.8 kN-m. 2) Determine the largest allowable torque on a motor shaft given shear stress limits and shaft dimensions. 3) Derive an equation to calculate maximum shear stress in a rod given an applied force and displacement. 4) Calculate shear stresses in a composite shaft under a 600 N-m torque load. 5) Determine shear stresses and rotation angles in 2 shafts under an 80 N-m torque. 6) Derive an equation for angle of twist in a taper

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CIVL 2120

    Mechanics of Materials

    Ch. 3 Homework Problems

    1. The electric motor exerts a torque


    of 2.8 kNm on shaft AB. All shafts
    are solid. Determine the maximum
    sharing stress in shaft (a) AB, (b) BC,
    (c) CD.

    2. A motor exerts a torque of magnitude TF


    at F. The shafts are made of steel
    (allowable shear stress = 85 MPa) with
    diameters dCDE = 22 mm and dFGH = 20
    mm. If rD = 150 mm and rG = 100 mm,
    determine the largest allowable value of TF.

    3. Solid cylindrical rod BC is attached to rigid


    lever AB and to a fixed support at C. The
    vertical force P applied at A causes a small
    displacement there. Show that the
    corresponding maximum shearing stress in

    the rod is = 2 , where d is the rod


    diameter and G its modulus of rigidity.

    4. The composite shaft shown consists of a 5mm-thick brass jacket (Gbrass= 39 GPa) bonded
    to a 40-mm-diameter steel core (Gbrass= 77.2
    GPa). Knowing that the shaft is subjected to a
    600 Nm torque, determine (a) the maximum
    shearing stress in the brass jacket, (b) the
    maximum shearing stress in the steel core, (c)
    the angle of twist of B relative to A.

    5. At a time when rotation is prevented at the


    lower end of each shaft, a 80-Nm torque is
    applied to end A of shaft AB. Given G = 77.2
    GPa for both shafts, determine (a) the
    maximum shearing stress in shaft CD, (b) the
    angle of rotation at A.

    6. A torque T is applied to the solid tapered shaft AB


    shown. Show that the angle of twist at A is
    =

    7
    12 4

    7. A steel pipe of 72-mm outer diameter is to be used to


    transmit a torque of 2500 Nm without exceeding an
    allowable shearing stress of 55 MPa. A series of 72-mmouter-diameter pipes is available for use. Knowing the wall
    thickness of the available pipes varies from 4 mm to 10 mm in
    2-mm increments, choose the lightest pipe that can be used.

    8. The design of a machine element calls for a 40mm-outer-diameter shaft to transmit 45 kW. (a) If
    the speed of rotation is 720 rpm, determine the
    maximum shearing stress in shaft a. (b) If the
    speed of rotation can be increased 50% to 1080
    rpm, determine the largest inner diameter of shaft
    b for which the maximum shearing stress will be
    the same in each shaft.

    You might also like