GYPROCK 500 Red - Book 2011 PDF

The Red Book
FIRE & ACOUSTIC DESIGN GUIDE
Including Green Building Systems

November 2011
You can be sure with CSR

CSR is a leading diversified manufacturing company with operations throughout
Australia as well as Asia and New Zealand. For more than 150 years, CSR has
been famous for the certainty built in to the companys range of leading products
and services.
Gyprock plasterboard and Cemintel fibre cement sheet products are proudly
made in Australia.
Sustainability
CSR produces a range of energy efficient building products and systems which
have the potential to reduce heating and cooling costs of homes and buildings,
essentially saving tonnes of greenhouse gases each year. Many of these
products are also produced from recycled materials thus:
Reducing the demand for raw materials
Lowering emissions and pollution during manufacturing
Saving land-fill space.
CSR Guarantee
CSR Building Products guarantees its Gyprock products to be free of defects
in materials and manufacture.
If a CSR product does not meet our standard, we will, at our option, replace or
repair it, supply an equivalent product, or pay for doing one of these.
CSR recommends that only products, components and systems recommended
by it be used. If this is not done, CSR will need to be satisfied that any defect
in its product is attributable to our failure to meet our standard (and not another
cause) before this guarantee applies.
This guarantee excludes all other guarantees and liability for damage or loss
in connection with defects in CSR's product, other than those imposed by
legislation.
A2
The Red Book
Introduction
Steel Stud Wall Systems
Timber Stud Wall Systems
Masonry Wall Systems
Ceiling Systems
Services Systems
Flanking Path Systems
Junctions & Penetrations
Index
The Red Book
IN
A3
How to Use The Red Book
System Index
Inside back cover
Section Index Page A3

A section index is provided
on page A3. The Red
Book is divided into
9 sections with colour
coded stripes at the side
and bottom of each page.
The section letter and
section page number is
provided at the bottom of
each page.
Introduction
Ceiling Systems
Service Systems
Index to Systems
System
N
005
010
015
025
032
035
039
040
043
044
045
046
050
055
060
061
062
075
080
089
090
091
092
093
110
121
122
123
125
126
127
128
129
131
135
150
152
155
165
167
168
170
171
175
178
179
180
185
186
192
193
194
195
196
197
198
206
207
208
212
216
217
218
222
223
225
An index of all systems

is provided on the inside
back cover and adjacent
page. Here all systems
are listed in numerical
order with a page number
reference.
IN
Index
A3
The Red Book
Page
N
B10
B10
B10
B10
B10
B10
B11
B12
B14
B14
B14
B14
B12
B12
B27
B27
B27
B12
B12
B29
B29
B29
B29
B29
B22
B33
B33
B33
B22
B34
B34
B34
B34
B22
B22
B23
B23
B23
B36
B36
B36
B37
B37
B23
B37
B37
B23
B35
B35
B38
B38
B38
B38
B38
B38
B38
B15
B15
B15
B16
B16
B15
B15
B17
B17
B17
System
N
226
230
231
235
240
241
243
244
248
249
250
255
275
280
290
291
292
293
294
295
296
297
298
305
310
315
320
325
330
335
350
352
354
355
375
380
390
391
392
393
403
410
411
415
419
425
430
450
455
475
480
493
494
495
496
497
498
500
501
502
503
506
507
508
509
510
Page
N
B17
B18
B18
B18
B19
B19
B19
B19
B31
B31
B15
B16
B16
B16
B24
B24
B24
B24
B25
B25
B26
B25
B26
C6
C6
C6
C6
C6
C6
C7
C7
C7
C7
C7
C8
C8
C16
C16
C16
C16
C15
C15
C15
C15
C15
C13
C13
C13
C13
C13
C13
C23
C23
C23
C23
C23
C23
C11
C11
C11
C11
C12
C12
C12
C12
B20
System
N
512
513
515
516
520
521
522
523
526
527
528
530
531
532
533
534
535
540
541
542
543
544
545
548
549
550
551
555
575
580
582
600
601
605
606
610
611
613
614
630
631
632
652
653
654
660
661
662
663
664
665
670
671
672
674
675
677
678
680
681
682
690
693
694
695
696
Page
N
B20
B20
B20
B20
B21
B21
B21
B21
D12
D12
D12
D12
D12
D12
D12
D12
D12
D10
D10
D10
D10
D11
D11
D10
D11
C9
D11
C9
C9
C9
C9
B11
B11
B11
B11
B13
B13
B13
B13
B23
B22
B22
C7
C8
C8
C8
C14
C14
C14
C14
C8
C14
C14
C14
C10
C10
C9
C9
C10
C10
C10
C21
C21
C22
C22
C21
System
N
697
698
722
723
724
730
731
732
737
738
739
760
761
762
763
764
765
766
767
768
769
774
775
776
777
778
779
780
781
783
784
787
788
795
796
797
798
801
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
829
831
832
Page
N
C22
C22
D16
D16
D16
D16
D16
D16
D6
D7
D7
D6
D6
D6
D6
D6
D6
D6
D7
D7
D7
D8
D8
D8
D8
D9
D9
D8
D8
D8
D8
D9
D9
D17
D17
D17
D17
E6
E6
E6
E6
E6
E6
E6
E6
E7
E7
E7
E7
E7
E7
E7
E7
E7
E7
E6
E8
E8
E8
E8
E8
E8
E8
E8
E9
E9
System
Page
N
N
833
E9
834
E9
835
E9
836
E9
837
E9
838
E9
839
E9
841
E10
845
E10
846
E10
847
E10
848
E10
849
E10
851
E14
852
E14
853
E14
856
E14
857
E14
858
E14
859
E14
860
E15
862
E13
863
E13
864
E13
865
E16
866
E16
867
E13
868
E13
870
E12
871
E12
874
E13
875
E13
876
E13
877
E16
878
E16
890
E19
891
E15
892
E15
893
E15
894
E15
900
C17
901
C17
902
C17
903
C17
911
C18
912
C18
915
C18
916
C18
920
C20
921
C20
923
C20
924
C20
925
C20
927
C20
928
C20
940
B32
940+
B32
ExpressWall
941
B32
942
B32
945
B28
946
B28
947
B28
950
E12
951
E12
952
E12
System
N
953
955
958
959
967
968
969
970
971
972
981
982
983
985
986
987
992
993
994
995
997
75PP
75PP-DC
75SS
75SS-DC
Hebel
Powerwall
001
Hebel
Powerwall
Hebel
Powerwall
PF-001
SS01
SS02
SS04
SS08
SS09
SS10
SS11
SS12
SS13
SS17
SS18
SS19
SS20
SS21
SS22
SS23
SS24
SS26
SS30
SS31
SS32
SS33
SS34
SS38
SS39
SS40
SS41
SS42
SS44
SS45
SS46
IN1
System Tables Sections B, C, d, e & F
Page
N
E12
E12
E11
E11
B31
B31
B31
B30
B30
B30
E17
E17
E17
E17
E17
E18
E18
E18
E18
E18
E18
D13
D13
D14
D14
D15
B35
C19
E11
F4
F4
F4
F5
F5
F5
F5
F5
F5
F5
F6
F6
F6
F6
F6
F6
F6
F6
F7
F7
F7
F7
F7
F7
F7
F8
F8
F8
F4
F4
F4
The Red Book
Steel Frame Internal Wall Systems Single Stud

SYSTEM SPECIFICATION
System number and icon illustration.
ACOUSTIC
OPINION
TYPICAL LAYOUT (CSR 010a shown)
PKA-052
Lining material as per system table.

Steel Studs at 600mm maximum centres.
Check for appropriate fire rating (FRL) if required.
NOTES:
Acoustic performance valid for studs 0.50 BMT.
Check for appropriate acoustic performance (Rw/Rw+Ctr) if required.

Acoustic performance values are provided via a matrix of options.
FRL
STUD DEPTH mm
SYSTEM
N
Report/Opinion
WALL LININGS
51
BOTH SIDES
//
1 x 10mm GYPROCK
Plasterboard CD.
CSR 010
Check System Specifications for elements common to the systems.
BOTH SIDES
//
1 x 13mm GYPROCK
Plasterboard CD.
SIDE ONE
1 x 13mm GYPROCK
AQUACHEK Plasterboard.
//
Check the typical layout illustration for the basic system format.
CSR 015
Acoustic Opinion or Test references information.
//
(c) 75 GW Partition 11kg
(d) TSB3/ASB3 Polyester
Check for alternative systems on the same and adjacent pages.
Relevant selection and design information is provided at the beginning of each

section. Installation layouts are shown at the back of sections (where applicable).
200mm minimum cavity.
90
102
118
176
35/27 37/30 37/30 38/31 41/34
(b) 50 GW Partition 11kg
39/29 41/32 42/33 43/34 45/36
44/35 44/35 45/36 47/38
39/31 40/33 41/34 42/35 44/37
WALL THICKNESS mm
42/32 43/33 44/34 46/36
77
90
102
118
176
(a) Nil
38/30 39/32 40/33 42/35 45/38
43/33 44/35 45/36 47/38 49/40
2 x 13mm GYPROCK
Plasterboard CD.
(e) 60 Soundscreen 1.6
46/37 46/37 48/39 50/41
43/35 43/36 44/37 46/39 48/41
WALL THICKNESS mm
45/35 46/36 48/38 50/40
90
103
115
131
189
(a) Nil
35/28 37/30 38/31 40/33 43/37
40/31 42/33 43/34 45/36 47/39
(c) 75
GW Partition
11kg
TYPICAL
LAYOUT
44/35 44/35 ACOUSTIC

46/37 48/40
OPINION
40/33 41/34 42/35 44/37
46/40
43/33 44/34 46/36 48/39

PKAA031
WALL THICKNESS mm
84
96
112
170
Rondo71
DUO Two-way
Steel angle to
Steel Grid Ceiling
support ceiling grid
(a) Nil
37/30 38/31 40/33 41/34 44/38
System
100mm
min 11kg
42/33insulation
43/34 45/36 46/37 48/40
System insulation (b) 50 GW Partition
System
1x 13mm GYPROCK
50mm
/ / Bradford Glasswool Partition batts
SOUNDCHEK
11kg/m3 to extent specified in table.
plasterboard.
Wall with required sound rating.
The Red
41/31 42/32 43/33 45/35
77
(a) Nil
Ceiling lining as per system table.
170
42/33 42/33 43/34 45/36
39/31 39/32 40/33 41/34 43/36
SIDE TWO
BOTH SIDES
112
39/29 40/31 41/32 42/33 44/35
CSR 032
Floor or roof structure.
96
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
84
34/26 35/28 36/29 37/30 40/33
1 x 13mm GYPROCK
Plasterboard CD.
BOTH SIDES
38/27 39/29 41/31 43/33
71
(a) Nil
1 x 13mm GYPROCK
Plasterboard CD.
CSR 025
39/29 39/30 41/32 43/34
36/28 36/28 37/30 39/32 41/34
Flanking Paths via Ceiling
150
36/26 37/27 38/29 40/31 42/33
SIDE TWO
SIDE ONE
92
31/23 32/24 33/26 35/28 38/31
WALL THICKNESS mm
CSR 011
76
Rw / Rw+Ctr
(a) Nil
WALL THICKNESS mm
Check System Lining details.
64
CAVITY INFILL
(Refer to Section A)
CSR 005
45/36 46/37 47/38 49/41
42/35 42/35 44/37 45/38 47/41
GYPROCK
Panel
Ceiling
System
WALL THICKNESS mm
44/34 46/36 47/37 49/40
77
90
102
118
176
B9
Book
EXTENT OF INSULATION
SYSTEM N
CEILING LININGS
1200mm each side

of the wall
Nil
Entire Ceiling
Rw
CSR FP01
Flanking Path Systems Section G
(a) Gyprock plasterboard panel 10mm
38
44
(b) Ecophon 20mm Focus A, Ds or E 20mm
21
24
25
(c) Ecophon 20mm Focus Glasswool Panels + plasterboard

panels 10mm
42
48
49
(d) Ecophon Master A 40mm
30
31
31
(ef) USG Radar, Impressions, Olympia Micro 15mm

(f) USG Mars, Millenia 19mm
System number details.
45
30-35
30-36
30-36
35
35-36
35-36
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Check the typical layout illustration for the appropriate system format.
System insulation

100mm
min
System insulation
Ceiling Framing
50mm Bradford Glasswool Partition batts

Check for appropriate acoustic performance (Rw/Rw+Ctr if required).

Acoustic performance values are provided via a matrix of options.
Check System Lining details.
Acoustic Opinion or Test references information.
NOTE: Junction may be

finished square, with
stopping bead or with
cornice. Do not rigidly
fix cornice to walls
where friction joints are
used
Refer to typical wall and ceiling junction details.

Refer to typical penetration details.
Fix track at each

main runner
(b) 1 x 13mm GYPROCK Plasterboard panel.
43/34
(c) 1 x 13mm GYPROCK FYRCHECK Plasterboard
46/38
1500mm max.
Entire Ceiling
48/39
53/45
55/47
59/51
60/52
Promaseal IBS backing58/50

54/46
59/51
55/47
60/52
rod 20% larger diameter

than gap (gap 15-30mm)
59/51
G3
J-Track
10mm dia. MS rod

fixed to slab and
support angle
1400mm max.
Stud
50/41
52/44
(e) 2 x 13mm GYPROCK FYRCHECK Plasterboard
RONDO P50 or P60

Shadowline Stopping
Bead (finish as
required)
Fix wall sheets at 10
to15mm below head
track flanges
(f) 2 x 16mm GYPROCK FYRCHECK Plasterboard
Mechanical fire
damper tested and
approved for
AS1530.4
Track section with

32mm flange fastened
to soffit at 600mm
centres max.
47/38
49/40
J-Track fixed to studs
(d) 1 x 13mm + 1 x 16mm

GYPROCK FYRCHECK Plasterboard
The Red Book
Main Runner
6 10mm
clearance to
GYPROCK
plasterboard
Damper seal angles

75mm x 50mm x
1.2mm MS
NOTE: This method of

construction is not
recommended for studs
adjacent to windows or
doors or studs carrying
loads greater than
0.25kPa.
Support angle 50mm

x 50mm x 5mm MS
1 or 2 layers GYPROCK
FYRCHEK Plasterboard
as per FRL
GYPROCK Shaft
Liner Panel
FIG Z002: DEFLECTION HEAD
FIG Z005: HEAD FOR SUSPENDED CEILING

Additional Furring Channel
where wall runs parallel to
setout
Suspended Ceiling
Top Cross Rail
FIG Z028: TYPICAL INTUMESCENT FIRE DAMPER

Refer to manufacturer for assessment number and installation details.
20mm gap
100mm max.
(do not fix
through track)
NOTE: Stopping bead
or cornice finish as
required. Do not rigidly
used
Fix cornice to
ceiling only with
Gyprock Cornice
Cement
Furring
Channel
Stud
Fix Head Track to Furring

Channel at 600mm max.
centres

to15mm below head
track flanges
Deflection Head Track

fastened at 600mm
centres max.
Stud
Where wall runs

perpendicular to furring
channel fix track to furring
at each intersection
Steel studs at
600mm centres
FIG Z006: WALL BASE DETAIL

STEEL STUD WALL SYSTEM
Fix track at 600mm max.

centres. With 150mm width
track, use 2 fixings
approximately 20mm in
from each side of track
Fill gap with CSR Gyprock
Sealant for acoustic
integrity
Stud
Rondo angles
mechanically
fixed to studs
GYPROCK
FYRCHEK
plasterboard
Proprietary
intumescent
damper
Spigot to terminate
with break joint
Proprietary extruded
aluminium track
Stud
Steel studs
at 600mm
centres
Finish as required
Fix extruded track at

each furring channel
GYPROCK plasterboard
ceiling fixed to furring
channel at appropriate
centres
Z2
Furring Channel in
normal setout position
Flexible Mastic
FIG Z003: HEAD USING ALUMINIUM HEAD TRACK
A4
CSR FP02
Fill gap with CSR

Gyprock Sealant for
acoustic integrity
1200mm each side

of the wall
Rw / Rw+Ctr
FIG Z004: HEAD FOR

SUSPENDED TEE-LOCK CEILING
Stud
6mm
clear
of
soffit
Nil
41/32
FIG Z027: INSTALLATION DETAIL FOR FIRE DAMPER IN SHAFT WALL SYSTEM APPRAISAL: CSIRO FCO 2109
Note: Wall/ceiling intersection details require engineers approval where seismic loads are expected.
100mm max.
to first fastener
(Do not fix
through track)
CEILING LININGS
(a) 1 x 10mm GYPROCK Plasterboard panel.
Non-Fire Rated Applications
Check System Specifications for elements common to the systems.
Junctions & Penetrations Section Z
EXTENT OF BUILDING BLANKET

SYSTEM N
Head & Base Details

FIG Z001: FRICTION FIT HEAD
Tape and set or

cornice finish
GYPROCK
plasterboard
ceiling
GYPROCK
plasterboard
Perimeter gaps sealed
Studs bottomed
in track
Steel studs
at 600mm
centres
10mm max. gap

at bottom of sheet
The Red Book
Z22
The Red Book
The Red Book
Section A
Introduction
Contents
The Red Book
An Introduction to The Red Book
A6
Components
A6 A15
Product Properties
A15 A16
Material & Construction Standards
A16
Fire Testing
A17
Lining Design
A18 A20
Building Acoustics
A21
Building Acoustics in Practice
A22 A23
Definitions
A24
A5
Introduction to
The Red Book
The Red Book Fire & Acoustic Design Guide provides a

ready reference to the performance of an extensive range of
CSR Gyprock and Cemintel fire and acoustic systems.
Over the last 60 years, CSR has developed effective,
practical and cost effective fire and acoustic systems for
most applications. Fire, acoustic and structural testing
has been carried out for all plasterboard and fibre cement
products, as well as those of CSR Bradford Insulation,
CSR Hebel and Rondo Building Products. To complement
this extensive testing program, CSR has obtained certified
assessments from appropriate authorities on the likely
performance of some systems. These assessments are
based on test results and expert opinion.
CSR Gyprock and Cemintel fire rated systems have been
tested or assessed to AS1530.4 : 1997 or 2005 at approved
testing laboratories.
CSR has developed systems with Fire Resistance
Levels (FRL) up to /180/180 (3 hours). The systems and
performance specifications detailed in this manual are
guaranteed only for the construction specified. Any variation
or substitution of materials or assembly requirements, or
any compromise in assembly may result in failure under
critical conditions. It is recommended that only accredited
plasterboard fixers install fire rated systems.
CSR Gyprock and Cemintel are continuously developing
products, which may result in changes to product
specifications, range and performance. The systems and
products in this Fire and Acoustic Design Guide are current
at the publication date.
Gyprock plasterboard lining products are manufactured
to AS2588 - Gypsum Plasterboard, and Cemintel fibre
cement products are made to AS2908.2 - Cellulose Cement
Products.
Components
CSR manufactures and supplies a diverse range of
plasterboard and fibre cement sheets, acoustic panels
and accessories to suit a multitude of wall, ceiling and
encasement applications.
Gyprock Plasterboard Cd is composed of a gypsum
core encased in a heavy duty linerboard. Available with long
edges recessed (RE) to assist in producing a smooth, even
and continuous surface once jointed, in square edge (SE),
and in combination RE/SE. Gyprock Plasterboard CD
incorporates Controlled Density (CD) technology. Gyprock
Plasterboard CD is suitable for internal walls and ceilings.
Gyprock Supaceil is a 10mm thick sheet designed
to span up to 600mm in ceiling applications. Gyprock
Supaceil is composed of a gypsum core encased in a
heavy duty linerboard. Long edges are recessed for flush
jointing. Gyprock Supaceil incorporates CD (Controlled
Density) technology.
Gyprock Soundchek has been designed to provide
increased acoustic resistance in wall and ceiling systems.
Gyprock Soundchek is composed of a high density
gypsum core encased in a heavy duty linerboard. Long
edges are recessed to assist in producing a smooth, even
and continuous surface once jointed. Gyprock Soundchek
is suitable for internal walls and ceilings.
Gyprock Impactchek is high strength plasterboard
designed for impact areas. It is composed of a glass fibre
reinforced gypsum core plus a fibreglass mesh bonded to
the inside of the back face. 13mm IMPACTCHEK is encased
in a violet linerboard and has equivalent fire and acoustic
performance to 13mm Fyrchek. The long edges of both
are recessed for flush jointing.
Gyprock Aquachek is designed for use in lining the
walls of wet areas of residential and commercial buildings.
It is a gypsum plasterboard with a core treated to make it
resistant to moisture and humidity. It is manufactured to
satisfy the requirements of AS2588 Gypsum Plasterboard.
It is encased with light blue linerboard and the long edges
are recessed.
Gyprock Fyrchek can be used in wall and ceiling
systems where an FRL is to be achieved, or where acoustic
performance is required. Gyprock Fyrchek is composed
of a specially processed glass fibre reinforced gypsum core
encased in a heavy duty pink liner board.
Gyprock FyrchekMR is primarily intended for walls and
ceilings in wet area rooms and for soffits and external walls
that must achieve fire resistance. Gyprock Fyrchek MR is
composed of a specially processed glass fibre reinforced
gypsum core which is treated in manufacture to withstand
the effects of moisture, and encased in a heavy duty light
blue liner board.
A6
The Red Book
Superchek
Gyprock Superchek is 10mm plasterboard with a very
dense core and heavy duty facing. It has an impact resistance
designed to withstand the knocks typical of residential
buildings, and has excellent sound resistance. It spans
600mm on ceilings and has a white paper face to assist
paint coverage.
Gyprock Plasterboard Panels

Gyprock Plasterboard Panels have a gypsum core and
various face treatments. Gyprock Panels are produced
to fit metric grid specifications of (600 x 1200mm nominal).
Perforated Panel has a white vinyl face finish, and a regular
grid of 6mm full depth holes. Perforations are approximately
10% of the panel area, and combined with suitable insulation,
provide a medium level of acoustic absorption.
FIG A2: GYPRoCk PeRFoRATed PANeL dIMeNSIoNS.
EC08 Partition is an economical, non-fire rated board for

general areas where acoustic requirements are not high.
EC08 Fire is the original GECA certified EC08 board with
fire and acoustic rating for party walls and meeting rooms.
EC08 Impact is fire and acoustic rated with impact resistance
for high traffic areas such as hallways and stairs in education
and health facilities. All products in the range have been
certified by GECA as meeting the requirements of their
environmental standard for Panel Boards.
Gyprock Flexible Plasterboard has been designed
for curved wall and ceiling systems and has an enhanced
core to enable bending to a small radius. It is composed of
a gypsum core encased in a heavy duty linerboard. Long
edges are recessed to assist in producing a smooth, even
and continuous surface once jointed. Gyprock Flexible
Plasterboard is 6.5mm thick and is installed in two layers.
CeminSeal Wallboard is an autoclaved, cellulose fibre
reinforced cement sheet that is immune to permanent
water damage and has high impact resistance. Ceminseal
Wallboard is suitable for internal walls as well as internal
and external ceiling applications. It has a recess on both
long edges so that sheets may be flush jointed, using CSR
jointing materials.
Gyprock Perforated Plasterboard has been designed for
use on walls and ceilings where additional sound absorption
is required. It is composed of a gypsum core encased in a
heavy duty linerboard and incorporates CD technology. Long
edges are recessed for flush jointing. Perforations total 8.2%
of the sheet area. For detailed pattern information, refer to
Section E.
530mm
eC08 Range
590mm
Gyprock Shaft Liner Panel is a 25mm thick sheet

composed of a glass fibre reinforced gypsum core encased
in a heavy duty linerboard. Gyprock Shaft Liner Panel is
used to enclose lift shafts, stairwells and service shafts in
multistorey construction. Gyprock Shaft Liner Panel can be
used to achieve fire resistance in wall and ceiling systems.
1130mm
1191mm
Supatone is a paper faced white ceiling tile suited to basic

commercial ceilings. A low maintenance bright white panel,
it can be wiped clean with a damp cloth.
Freshtone diamond White has a lightly textured vinyl
surface which resists fading and mould growth. With a white
finish, it is suitable for shopping centres, factories and offices.
Acoustic Wall and Ceiling Panels
CSR provides a range of acoustic ceiling and wall products
through the Fricker Comprador division. The range includes
mineral fibre and glasswool ceiling panels, metal pan ceiling
panels, and glasswool wall panels. Brands include Ecophon,
USG, Daiken, Fricker and Comprador.
The products have a variety of physical properties to assist
in their specification, including Noise Reduction Coefficient
(NRC), Ceiling Attenuation Class (CAC), Light Reflectance
(LR), colour and edge profile. These and other properties
are listed in Section E.
CSR Fricker Comprador supplies fully integrated ceiling
solutions including suspension systems, ceiling tiles, lights,
diffusers and perimeter trims.
For more information call 1300 374 253.
1200mm
FIG A1: PeRFoRATIoN PATTeRN
3600mm
The Red Book
A7
Gyprock Cornice
CSR Gyprock manufactures six popular machine made
cornice profiles to cater for many styles and applications.
Please refer to Table A1 in this section for general product
information.
eclipse ClimaPlus
19mm thick mineral
fibre panels with three
edge options.
GYPRoCk
CoVe CoRNICe
GYPRoCk
JAZZ CoRNICe
GYPRoCk
SYMPhoNY CoRNICe
GYPRoCk
CoNCeRTo CoRNICe
GYPRoCk
TeMPo CoRNICe
GYPRoCk
CLASSIC CoRNICe
Impressions
ClimaPlus
15mm thick mineral
edge options.
Mars ClimaPlus
19mm thick mineral
fibre/glasswool
panels with three
edge options.
olympia Micro
ClimaPlus
15mm thick mineral
edge options.
GYPRoCk ShAdoWSeT
A8
The Red Book
Gyprock Plasterboard Range
CeminSeal Wallboard Range
TABLe A1: GYPRoCk PRoduCT WeIGhTS
TABLe A2: CeMINSeAL WALLBoARd PRoduCTIoN

SIZeS ANd ToLeRANCeS
Colour shading behind each product approximates the

colour of the product face liner sheets. For detailed sheet
sizes and availability, contact the CSR Gyprock Sales Centre
in your region.
Thickness
Mass
mm
kg/m2
10
13
10
13
10
10
13
10
13
13
10
13
13
13
6.5
13
16
13
6.5
8.5
6.5
8.5
6.5
7.2
13.0
8.0
10.4
10.3
10.4
9.3
10.5
12.1
4.25
10.5
12.5
10.7
16
13.5
PERFORATED SHEET
13
10.0
SHAFT LINER PANEL
25
19.8
Gyprock Cornice Products
Size
Gyprock Lining Products

CD RECESSED EDGE
CD SQUARE EDGE
CD RECESSED EDGE/SQUARE EDGE
SUPACEIL
SOUNDCHEK
AQUACHEK
IMPACTCHEK
SUPERCHEK
EC08 PARTITION
EC08 FIRE
EC08 IMPACT
FLEXIBLE
FYRCHEK
FYRCHEK MR
COVE CORNICE
CLASSIC CORNICE
TEMPO
CORNICE
CeminSeal Wallboard has two long edges recessed to

allow seamless jointing.
Thickness
(6mm RE = ) (9mm RE = ) (12mm RE = )
Length
(mm)
Width (mm)
900
1800
2400
1350
2700
3000
1200
3600
4200
Mass 6mm thickness (nominal)
9.7kg/m2
14.3kg/m2
18.8kg/m2
Length
+0 to -4mm
Width
+0 to -3mm
Thickness
+0.25 to -0.25mm
Diagonals Difference (max)
3mm
Mass
kg/m2
55
0.7kg/m
70
0.9kg/m
90
1.3kg/m
90
1.2kg/m
90
1.8kg/m
SYMPHONY CORNICE
75
0.9kg/m
CONCERTO CORNICE
90
1.6kg/m
JAZZ CORNICE
75
1.8kg/m
SHADOWSET
105
1.0kg/m
The Red Book
CeminSeal Wallboard is manufactured in the following sizes

and available in all states.
A9
Steel Components
Stud Adhesive
CSR recommends steel building elements manufactured by

Rondo Building Services Pty Ltd, for our systems.
Gyprock Acrylic Stud Adhesive is coloured blue for easy

identification. It can be used on both timber and steel in
temperatures not less than 5C.
General information on Rondo steel building components is

provided throughout this manual. Additional information can
be obtained from the Rondo Building Services Pty Ltd office
in your state, or telephone 1300 367 663.
CSR Gyprock Resilient Mount

The CSR Gyprock Resilient Mount is a proprietary
component used in conjunction with Rondo steel sections for
fastening Gyprock
plasterboard
to a supporting
structure while
simultaneously
i s o l a t i n g i t f ro m
structure bor ne
vibration.
This significantly reduces the amount of impact noise, speech
and low frequency sound filtering through to rooms above,
below or alongside the noise generating room. The resilient
mount has been design for use on ceilings and can be
used on walls provided plasterboard with minimum mass of
12.5kg/m2 is fixed on the resilient mount side of the wall. The
mount can be used in fire rated and non-fire rated systems.
A10
Contact surfaces must be free of oil, grease or other foreign

materials before application. The adhesive is applied with a
broad knife to form 25mm diameter by 15mm high walnuts.
T h i s p ro d u c t
is suitable for
use with prepainted metal
battens and
some treated
t i m b e r s .
Always follow
directions on
packaging
when using
CSR stud
adhesive.
Masonry Adhesive
Gyprock Masonry Adhesive is used to adhere Gyprock
plasterboards to concrete and all masonry substrates.
The Red Book
Jointing Accessories & Compounds
Mastics & Sealants
CSR has a wide range of compounds, cements and

accessories for finishing plasterboard installations.
Gyprock Fire Mastic must be used in fire rated systems

where caulking is indicated and is recommended for caulking
acoustic systems.
Refer to the Gyprock Residential Installation Guide,

NGYP547 for detailed jointing and finishing information.
Gyprock Wet Area Acrylic Sealant is recommended for

sealing non-fire rated wet area systems.
Fasteners
CSR Gyprock distributes a comprehensive range of ring
shank nails, hot-dip galvanised clouts, and screws for
use with timber and steel framing to accommodate most
installation applications. For exterior applications, refer to the
appropriate installation guide.
The Red Book
A11
TABLe A3: FIxING PLASTeRBoARd To SoFTWood

Plasterboard
Thickness
1st Layer
2nd Layer
3rd Layer
6.5mm
Plasterboard
2.8x40mm Gal Clout or

2.8x25mm Ring Shank Nail or
Type S #6-18 x 25mm NP Screw

Type S #6-18 x 32mm NP
Screw
10mm
Plasterboard

Type S #6-18 x 25mm NP Screw (on wall)
Type S #6-18 x 30mm NP Screw (on ceiling)

Screw
13mm
Plasterboard


Screw

Type S #8-15 x 65mm NP Screw or
#10x40mm Laminating Screw
16mm
Plasterboard


Screw

13mm + 16mm
Plasterboard


Screw
TABLe A4: FIxING PLASTeRBoARd To hARdWood

Plasterboard
Thickness
1st Layer
2nd Layer
3rd Layer
6.5mm
Plasterboard


Screw
10mm
Plasterboard

Type S #6-18 x 25mm NP Screw (on wall)
Type S #6-18 x 30mm NP Screw (on ceiling)

Screw
13mm
Plasterboard


Screw

16mm
Plasterboard


Screw

13mm + 16mm
Plasterboard


Screw
TABLe A5: FIxING FIBRe CeMeNT ANd PLASTeRBoARd To TIMBeR

Lining Thickness
1st Layer
6mm Wallboard

2nd Layer
9mm Wallboard

13mm Plasterboard +
6/9mm Wallboard over


16mm Plasterboard +


6mm Wallboard +
13/16mm Plasterboard over


9mm Wallboard +


NOTES:
Type 'W' screws of equivalent length may be used as an alternative to Type S NP when fixing to timber only.
Predrill 9mm and 12mm Wallboard for easier fixing.
Fixings are suitable for internal applications only.
NP
= Needle Point Screws.
DP
= Drill Point Screws.
GAL = Galvanised.
A12
The Red Book
TABLe A6: FIxING PLASTeRBoARd To STeeL 0.5 0.8mm BMT

Plasterboard Thickness
1st Layer
2nd Layer
6.5mm Plasterboard
3rd Layer
10mm Plasterboard
13mm Plasterboard

16mm Plasterboard

13mm + 16mm
Plasterboard
TABLe A7: FIxING PLASTeRBoARd To STeeL 0.8 2.4mm BMT

Plasterboard Thickness
1st Layer
2nd Layer
3rd Layer
6.5mm Plasterboard
Type S #6-18 x 25mm DP Screw
10mm Plasterboard
13mm Plasterboard
16mm Plasterboard
13mm + 16mm
Plasterboard
TABLe A8: FIxING FIBRe CeMeNT ANd PLASTeRBoARd To STeeL 0.5 0.8mm BMT
Lining Thickness
1st Layer
6mm Wallboard

FibreZIPS M5-18 x 20mm
2nd Layer
9mm Wallboard

6mm Wallboard +

9mm Wallboard +

13mm Plasterboard +
16mm Plasterboard +
TABLe A9: FIxING FIBRe CeMeNT ANd PLASTeRBoARd To STeeL 0.8 2.4mm BMT
Lining Thickness
1st Layer
2nd Layer
6mm Wallboard
9mm Wallboard
6mm Wallboard +
9mm Wallboard +
13mm Plasterboard +
16mm Plasterboard +
NOTES:
Predrill 9mm and 12mm Wallboard for easier fixing.
Fixings are suitable for internal applications only.
NP
= Needle Point Screws.
DP
= Drill Point Screws.
GAL = Hot-Dip Galvanised.
The Red Book
A13
Insulation Materials
Wall System Thermal Performance
CSR Fire and Acoustic Systems incorporate CSR Bradford

glasswool and rockwool insulation. These products
have undergone significant acoustic testing and have
a proven track record of performance and durability in
service. Additional information on CSR Bradford Insulation
materials is available by telephoning CSR Bradford on
1300 850 305.
Timber and steel stud external walls in this manual include

thermal ratings expressed as Rt(win) and Rt(sum), to represent
Total R-values for the Winter and Summer design conditions
as required by the BCA.
Although insulation materials are often specified for

thermal resistance, they can contribute significantly to the
acoustic performance of wall and ceiling systems. CSR
only recommends materials that have been tested for fire
and acoustic applications, have proven durability, and are
supported by their manufacturer for these applications.
Should other insulation materials be used, the manufacturer
of those materials must verify the performance of the
complete system, CSR will not support the performance of
substitute materials.
Acoustic Polyester insulation manufactured by Tontine and
Autex have been tested in acoustic applications by the
manufacturer and are specifically made for that purpose. CSR
accepts the use of Tontine and Autex Polyester insulation.
The Total R-values presented are based on assessments

c a r r i e d o u t i n a c c o rd a n c e w i t h t h e m e t h o d s o f
AS/NZS4859.1 amdt 1:2006 (Materials for thermal
insulation of buildings - Part 1: General criteria and technical
provisions). Any included bulk insulation is a CSR Bradford
product that has a material R-Value compliant with the
standard, and building elements have thermal values sourced
from the AIRAH handbook. No allowance has been made
for thermal bridging from the structural members. Thermal
performances quoted are based on an assessment through
the insulation path.
The contribution to Total R-values depends on installation,
workmanship and environmental conditions and it is
assumed that cavities that are ventilated.
TABLe A10: SPeCIFIed INSuLATIoN ANd ABBReVIATIoNS

(Abbreviated names have been used in system tables).
Product
Abbreviation
25mm Bradford Fibertex 450 80kg/m3
25 Fibertex 450
45mm Bradford Rockwool Partition batts 38kg/m3

60mm Bradford
Soundscreen
45 Rockwool Partition batts
R1.6 wall batts (Rockwool)
35kg/m3
75mm Bradford Soundscreen R2.0 wall batts (Rockwool) 32.5kg/m3

88mm Bradford
Soundscreen
R2.5 wall batts (Rockwool)
40kg/m3
60 Soundscreen 1.6
75 Soundscreen 2.0
88 Soundscreen 2.5
120mm Bradford Soundscreen R3.0 floor / ceiling batts (Rockwool) 30kg/m3
120 Soundscreen 3.0
50mm Bradford Glasswool Partition batts 11kg/m3
50 GW Partition 11kg
11kg/m3
14kg/m3
75mm Bradford Gold Batt R1.5 wall batts (Glasswool) 8.8kg/m3
75 Gold Batts 1.5
75mm Bradford Gold Batt R2.0 wall batts (Glasswool) 18.0kg/m3
75 Gold Batts 2.0
90mm Bradford Gold Batt R2.0 wall batts (Glasswool 10.5kg/m3
90 Gold Batts 2.0
34.0kg/m3
90 Gold Batts 2.7
90mm Bradford Gold
Batt
R2.7 wall batts (Glasswool)
140mm Bradford ceiling Gold Batt R2.5 (Glasswool) 6.4kg/m3
140 Gold Batts 2.5
Batt
6.7kg/m3
165 Gold Batts 3.0
215mm Bradford ceiling Gold Batt R4.0 (Glasswool) 6.9kg/m3
215 Gold Batts 4.0
Tontine TSB 2 (50mm) / Autex ASB 2 (50mm) Polyester Insulation
TSB2/ASB2 Polyester
TSB3/ASB3 Polyester
TSB4/ASB4 Polyester
Tontine TSB 5 (85mm) Polyester Insulation
TSB5 Polyester
Tontine Blanket (25mm) 10kg/m3 Polyester Insulation
TBL/1025 Polyester
38mm Bradford Masonry Wall Blanket (HP Glasswool)
Masonry Wall Blanket R1.2
165mm Bradford ceiling Gold
A14
R3.0 (Glasswool)
The Red Book
TYPICAL BRAdFoRd INSuLATIoN PRoduCTS
For wet area walls and external ceilings subject to intermittent

high humidity where plasterboard is specified, Gyprock
Aquachek or Gyprock FyrchekMR or CeminSeal
Wallboard are recommended. In all cases follow product
installation brochures.
Thermal Performance
Gyprock and Cemintel products have been tested to
ASTM C518 for thermal performance.
The R values for Gyprock plasterboards are:
10mm plasterboard = 0.04 0.05 m2K/W.
The R values for Cemintel products are:
6mm fibre cement = 0.02 m2K/W.
7.5mm fibre cement = 0.03 m2K/W.
9mm fibre cement = 0.03 m2K/W.
Product
Properties
Thermal & Moisture Stability
Gyprock plasterboard and Cemintel fibre cement
products are stable building materials when subjected to the
normal range of interior temperature and humidity conditions.
Thermal coefficient of Linear Expansion ().
Plasterboard: =16.2 x 10 -6 mm (mm/C) in the
temperature range 4C to 38C.
Fibre cement: = 7.5 x 10-6/C.
Final length is calculated as follows:
Lf = Li (1 + T).
The hygrometric coefficient of expansion ().
P l a s t e r b o a rd : = 7 . 2 x 1 0 -6 m m / m m / % R . H .
(5% 90% R.H.). Final length is calculated as follows:
Lf = Li (1 + RH).
Fibre cement: = 0.18% (expansion from equilibrium to
saturated). Final length is calculated Lf = Li x x (% of
saturation).
Internal Moisture
Gyprock plasterboard must not be used where it will be
in contact with liquid water or an atmosphere of constant
relative humidity above 90%.
Gyprock Plasterboard CD, Gyprock Supaceil and
Gyprock Soundchek are designed for use in dry areas only.
The Red Book
A15
Fire hazard Properties
Combustibility
The BCA limits the materials used in Class 2 to 9 buildings

by controlling the Fire Hazard properties of linings. These
properties are assessed using AS/NZS3837 cone calorimeter
test.
In accordance with BCA Clause C1.12, plasterboard and

fibre cement sheet may be used wherever a non-combustible
material is required by the Code.
Please refer to Table A11 for Gyprock plasterboard and

Cemintel product performance details. Contact Fricker
Comprador for properties of other acoustic wall and ceiling
products.
TABLe A11: FIRe hAZARd PRoPeRTIeS
Material &
Construction
Standards
CSR Product
ASEA
m2/kg
Group
Number
Report
10 13mm Plasterboard CD
<250
10mm SUPACEIL
<250
All materials and procedures shall comply with the following

standards where applicable, and all additional details
contained in Gyprock and Cemintel Technical Literature.
10 13mm SOUNDCHEK
<250
Plasterboard Manufacture:
10 13mm AQUACHEK
<250
AS/NZS2588 : Gypsum plasterboard.
6.5mm FLEXIBLE
<250
Plasterboard Installation:
13mm Perforated Sheet
<250
13 16mm FYRCHEK
<250
MR
<250
25mm SHAFT LINER PANEL
<250
10mm SUPERCHEK
<250
13mm
IMPACTCHEK
<250
13mm
ECO8
<250
13mm ECO8 Fire
<250
13mm ECO8 Impact
<250
CeminSeal Wallboard
<250
13mm Perforated Panels
<250
10mm
Diamond White
<250
10mm SUPATONE
<250
10 13mm Unpainted Panel
<250
Ecophon ADVANTAGE
<250
Ecophon FOCUS
<250
Mars
<250
Eclipse
<250
Impressions
<250
Olympia Micro
<250
13 16mm FYRCHEK
Partition
FRESHTONE
AS/NZS2589 : Gypsum linings in residential and light

commercial construction Application and Finishing.
Plasterboard and Fibre Cement in Wet Areas:
AS3740 : Waterproofing of Wet Areas Within Residential
Buildings.
NOTES:
ASEA = Average Specific Extinction Area
WFRA 45759
FAR 2781
FH 3619
FH 3621
FH 3623
A16
The Red Book
Fire Testing
Fire resistance testing is conducted to the Australian
Standard AS1530 part 4 Fire Resistance Tests of Elements
of Building Construction.
This standard gives the test method and criteria of failure for
the various elements of construction such as partition walls,
floor/ceilings and roof/ceilings.
The common regulatory FRL requirements are:

Non-Loadbearing
Loadbearing
/30/30
30/30/30
/60/60
60/60/60
/90/90
90/90/90
/120/120
120/120/120
/180/180
180/180/180
For Example: /120/120.
The specimen assemblies are built into the test furnace

and subjected to furnace temperatures in accordance with
AS1530.4 Standard Time vs Temperature Curve.
The dash indicates no requirement for Structural

Adequacy, which applies to all non-loadbearing systems.
FIG A3: STANdARd TIMe vs TeMPeRATuRe CuRVe
The second 120 indicates Insulation for 120 minutes.

For any specified FRL, a system having equal or higher
respective criteria may be used. Some systems have
multiple FRLs stated. FRLs expressed as /y/z relate to
non-loadbearing walls; FRLs expressed as x/y/z relate to
loadbearing walls; or FRLs expressed as x/y/z* relate to walls
with additional design limits.
1200
1100
TEMPERATURE (C)
The first 120 indicates Integrity for 120 minutes.
1000
900
800
What is Resistance to the Incipient

Spread of Fire?
700
600
Ceiling systems may be required to achieve a Resistance to

the Incipient Spread of Fire.
500
0
30
60
90
120 150 180 210 240 270 300 330 360

TIME (minutes)
how the Specimen is Assessed

The test specimen is heated in the prescribed manner until
the failure criteria has been reached, or is terminated by
agreement between parties.
Assessment criteria are represented by three performance
measurements known as Fire Resistance Levels (FRL).
This requires the ceiling to provide adequate thermal

insulation to prevent combustibles in a roof/ceiling or floor/
ceiling cavity from igniting for the specified time.
The Building Code of Australia requirement for some ceiling
systems is to provide Resistance to the Incipient Spread of
Fire (RISF), into the space above itself, for not less than 60
minutes. Systems that meet this requirement are indicated
in the system tables.
Structural Adequacy
Fire hazard Properties
Failure occurs when the specimen collapses under load.
Fire hazard properties of wall and ceiling linings in some

classes of building are specified by the BCA. Refer to Table
A11 for fire hazard properties of CSR products.
Integrity
Failure occurs when the specimen develops cracks or
openings through which flames or hot gases can pass.
Insulation
Smoke Proof Walls
Failure occurs when the average temperature of the

unexposed surface of the specimen increases by more than
140C above the initial temperature, or the temperature at
any point of the unexposed surface increases by more than
180C above the initial temperature.
Smoke proof walls are required in some Class 9a

buildings, and they must be built from non-combustible
materials where they do not require an FRL. Steel framed
wall systems clad with Gyprock Plasterboard CD
(eg. CSR 010) may be used.
The test performance of the specimen is expressed as a Fire

Resistance Level, which indicates the number of minutes for
which the specimen fulfils the requirements of the three fire
test criteria. These numbers are then rounded down to the
nearest regulatory requirement.
Fire rated smoke proof walls should be selected from the

steel framed systems (refer to Section B) with an appropriate
FRL.
All systems in this guide with a stated FRL have been

assessed by Registered Testing Authorities, including CSIRO,
BRANZ and Exova Warrington Fire.
The Red Book
Smoke proof walls required for Class 9c buildings may use

steel or timber framing with linings of 13mm Gyprock
Plasterboard CD or CeminSeal Wallboard. Refer to systems
CSR 010, 654 and 310.
A17
Lining Design
There are a number of methods for ensuring that plasterboard
linings meet end user expectations. For best results, these
should be considered in the planning stages of a project and
be clearly set out in specifications and contract documents.
It is noted in the plasterboard standard AS/NZS2589.1
Gypsum linings Application and Finishing that it is good
practice to construct a reference area of decorated work
to aid in judging quality of walls and ceilings throughout a
project.
Levels of Finish
A Level of Finish sets out the minimum specifications for
installation processes from framing preparation to lining
decoration. The levels are defined in AS/NZS 2589.1, and are
intended to provide builders, installers and their customers
with defined methods and practices necessary to meet the
customers expectations in terms of the Level of Finish.
It is essential to determine the level of finish required before
the frame construction begins, as specific tolerances are
required for frame alignment as well as for plasterboard fixing
and finishing for each of the levels of finish. Unless these
requirements are met throughout construction, it may not be
possible to attain the desired finish level without extensive
corrective measures.
In general, walls and ceilings should be specified to Level

4 Finish unless a higher or lower level of finish is required.
Complete details for a Level 4 Finish are set out in Gyprock
Residential Installation Guide No. GYP 547.
A Level 5 Finish should be used wherever gloss or semi-gloss
paints are to be used, where paint is mid or dark coloured, or
where critical light conditions occur such as from windows,
skylights, or silhouette and spot lighting.
Installation is similar to Level 4 Finish with the addition of
a skim coat which is used to remove differential surface
textures and porosity. Skim coating refers to a thin finish
coat, rolled, trowelled or airless sprayed and then possibly
sanded, to achieve a smooth and even finish. It is normally
less than 1mm in thickness and is applied over the entire
surface to fill imperfections in the joint work, smooth the
paper texture and provide a uniform surface for decorating.
Critical Light
The impression of flatness of plasterboard is influenced by
factors such as the accuracy of the substrate, the fixing
methods, joint formation and finishing textures. A surface
that appears perfectly flat in one lighting condition can
seem uneven in another. Any imperfection or undulation in
a completed lining installation can become obvious under
critical or glancing light, where the incident light from an
artificial or natural source is nearly parallel to the surface.
FIG A4: PRoCeSS FoR deTeRMINING APPRoPRIATe LeVeL oF FINISh
DECORATION
Finish Not Important

or Undecorated
Wall covering,
Wallpaper or Texture
Paint
Flat/Matt/Satin/
Low Sheen
Pastel/
Mid-tones
Critical & Non-critical

Lighting
Level 3 Finish
A18
Level 4 Finish
Non-critical
Lighting
Semi-gloss/Gloss
Dark tones
Critical
Lighting
Critical & Non-critical

Lighting
Level 5 Finish
The Red Book
To minimise the effect of critical lighting from artificial lighting

sources:
Locate fluorescent lights about 450mm below the ceiling
to give a more even distribution of light.
Use more lights at regular spacings to give an even,
diffused light.
Recess light fittings into a ceiling.
Allow a generous angle of incidence to the surface for
feature lighting, such as spotlights, to minimise the
highlighting of imperfections.
Do not use up-lights or unshaded light sources close to a
wall or ceiling.
To minimise natural lighting problems, particularly from direct
sunlight:
Avoid placing windows immediately adjacent to the end
of a wall.
Do not take window glazing up to ceiling level.
Provide sun shades over windows.
FIG A5: TYPICAL GLANCING LIGhT SITuATIoNS
Applied Finish Specification

Finishes applied to plasterboard surfaces can have a
significant effect on the perceived quality of the installation,
particularly where critical lighting conditions exist. The
difference in texture and absorption characteristics between
the body of the sheet and joints may show through thin and
low quality paint coatings. Recommended paint systems
consist of one coat of a plasterboard sealer followed by two
coats of finishing paint.
Always follow the manufacturers instructions for application
and recoating. For best results, specify that coatings are
applied with a roller to achieve a full even coat and a light,
uniform texture over the entire surface.
General rules when specifying an applied finish are:
Textured or heavy patterned finishes tend to hide
imperfections.
Matt finishes minimise imperfection visibility.
Semi-gloss and gloss finishes highlight imperfections.
Light colours are less likely to show imperfections and
impact damage. They are also more effective at diffusing
light and reducing shadow effects, particularly in smaller
rooms.
Gloss paints tend to highlight paint application variations
(e.g. where a good wet edge has not been maintained
when painting).
Paint applied with a longer pile roller tends to mask
imperfections better than those applied with a short pile
roller.
Glancing light
Jointing
Shadow zone
Shadow zone
Jointing
Glancing light
Wall mounted light
The Red Book
A19
Resistance to Impact
Curved Walls and Ceilings
Wall lining materials may be selected for properties relating

to resistance to damage. These properties include bending
strength (resistance to static load), soft body impact
resistance (resistance to damage from people impact,
measured with a swung sand bag), and surface damage
resistance (resistance to indent from small, solid objects).
Refer to Table A12 for a selection of linings and relative
performance for the various properties.
Gyprock plasterboard can be curved for installation

on walls and ceilings that have appropriately designed
framing. Maximum frame spacing for curved walls is reduced
compared to straight walls, and can be found in the relevant
installation manuals.
TABLe A12: STReNGTh ANd IMPACT PRoPeRTIeS
TABLe A13: MINIMuM RAdIuS FoR CuRVed WALLS
Lining
Bending
Strength
Soft Body
Impact
Resistance
Surface
Damage
Resistance
10mm Superchek
13mm Impactchek
10mm Gyprock
plasterboard CD
13mm EC08
Impact
6mm CeminSeal
Wallboard
Note: More s indicates higher performance.
Gyprock plasterboard of 10mm and 13mm thickness

provide adequate resistance to soft body impacts likely in
domestic or light commercial use respectively.
Walls lined with Gyprock Fyrchek , Impactchek and
CeminSeal Wallboard can meet various requirements of
Specification C1.8 of the Building Code of Australia 2004.
This clause specifies resistance to Uniform Distributed Loads
(UDLs), surface indentation and impact from a weighted
sand bag that is dropped from a specified height.
The minimum curvatures for a range of products are listed

in Table A13. Note that Gyprock Flexible plasterboard is
6.5mm thick and is always used in two layers.
Plasterboard Lining
Minimum Radius
(Concave)
Minimum Radius
(Convex)
6.5mm Flexible
Plasterboard
450 mm
250 mm
10mm plasterboard
CD
900 mm
900 mm
13mm plasterboard
CD and 10mm
Supaceil
1000 mm
1000 mm
13 & 16mm Fyrchek
3m
3m
13mm Perforated
Plasterboard sheet
20m
20m
FIG A6: FRAMING PRePARATIoN FoR CuRVed WALL

uSING RoNdo FLexI-TRACk
Refer to GYP544, Gyprock Steel Frame Wall Systems Installation Guide for
maximum stud spacings.
Rondo Flexi-Track
Minimum curving radius for

Rondo Flexi-Track.
Track
Minimum
Depth
Radius
51mm
180mm
64mm
200mm
76mm
230mm
92mm
285mm
150mm
475mm
FIG A7: CuRVed CeILING FRAMING

Curved Furring Channel
Ceiling Framing
Curved Gyprock plasterboard
A20
The Red Book
Building
Acoustics
Building acoustics can be separated into sound absorption
and sound transmission.
Sound absorption relates to control of sound that is generated
within a room and how it affects people in that room.
Sound transmission relates to sound that passes through a
dividing element (direct sound, controlled by the elements
sound insulation), and through the surrounding structure
(indirect or flanking transmission).
Methods of controlling noise in buildings can be based on
systems, structure and lining materials and their absorption
and transmission properties.
CSR recommends that an acoustic engineer be consulted
for all projects where acoustics are important.
Flanking Transmission
Sound Impact Ratings

The BCA has performance requirements relating to sound
impact for floors and some walls.
For floors, this is specified as a maximum value such as:
Lnw+CI = 62. Note that lower values of Lnw+CI indicates
better acoustic impact performance. Queensland and
Northern Territory have no requirements for impact rating
of floors.
Walls may be required to meet the definition of Discontinuous
Construction. This means that wall leaves must be separated
by at least 20mm and no mechanical connection is permitted,
except that masonry may have resilient ties.
Systems that meet this specification are noted in the
appropriate system specifications.
FIG A8: CoMMoN FLANkING TRANSMISSIoN PAThS
1. Ceiling plenums, floors, walls.
2. Poor seals between structural
elements and around service
penetrations.
3. External air-borne paths.
Flanking sounds reach adjoining areas by indirect paths,

rather than through the dividing element. The perimeter
junction of walls, floors and ceilings that surround the
dividing element are the main paths for flanking transmission.
Other paths include open windows, ducts, doorways and
suspended ceilings.
Noise sources that have a high degree of low frequency
noise such as traffic, aircraft and DVD sound systems have
potential for transmission through the building structure.
Transmission of this type of noise follows structural load
paths and can be controlled by breaking these load paths
or providing complete separation of the structure.
4. Heating and ventilation ducting.

5. Rigid plumbing connections and
penetrations.
6. Back-to-back cabinets and
switches/power outlets.
1
1
4
2
2
3
6
4
2
3
6
5
1
Noise sources that generate a high amount of mid and

high frequency noise, such as services and speech, tend to
transmit via air paths and direct transmission in lightweight
construction.
Typical problem areas for this type of transmission include
doors and door frames, glazing, suspended ceiling cavities
and ductwork. Practical methods for addressing common
situations within buildings can be seen in Section Z.
The Red Book
A21
Building
Acoustics in
Practice
System Performance
The Rw, Rw + Ctr and Ln,w + CI values in this manual refer to
expected results of a laboratory test on an element.
Extensive testing over many years has been carried out
by CSR at laboratories including the Commonwealth
Experimental Building Station (later CSIRO) at North Ryde
NSW, National Acoustic Laboratory at Lindfield NSW, CSIRO
Laboratories at Highett, Victoria and even, up to 1978, at
our own NATA registered laboratory. Extensive development
testing has been carried out at Rintoul Laboratories, Seven
Hills NSW since 1995, and some of the systems subsequently
validated at other laboratories.
Performance values provided by PKA Acoustic Consulting
use a prediction system based on these tests, and the
system has been updated to include the most current CSR
sponsored testing. The prediction system has been calibrated
against the round robin European test of a standard
plasterboard wall in 24 European acoustic laboratories, and
has successfully predicted the performance of a calibration
wall for an acoustic laboratory in Brisbane.
As testing from different laboratories can vary (the European
24 laboratory test of the standard plasterboard wall was
Rw47 to Rw52), it is possible that laboratory tests may be 1
to 2 Rw points above a prediction.
All care has been taken with preparation of these predictions
and it is assumed that construction is strictly in accordance
with this manual and relevant Gyprock and Cemintel
installation guides.
Acoustic Integrity
The acoustic integrity of a system can be influenced by the
combination of elements that make up the system. Single
leaf and uninsulated systems are more dependant on high
quality installation, as relatively minor defects can cause
major degradation of the system performance.
Building systems that allow defects to be hidden from view
have a higher chance of gaps being left unsealed, making
them more vulnerable to performance degradation.
The likelihood and effect of defects occurring with typical
systems is shown in Table A14.
TABLe A14: ACouSTIC INTeGRITY
Wall System
The BCA specifies deemed to satisfy acoustic values that

are laboratory results, and in some cases allows lower values
when site tested. For example, in a Class 2 building the
separating wall can have Rw + Ctr = 50 (a laboratory result),
or DnT,w + Ctr = 45 (tested on site). The difference of 5 is that
expected between site and laboratory, although it might not
always be the case. CSR recommends that where designers
are selecting systems based on expected site performance,
an acoustic engineer be consulted.
A22
Effect of
Defects on
Performance
High
High Degradation
High
High Degradation
Low
High Degradation
Low
Moderate
Degradation
Low
Low Degradation
Single skin masonry wall
Masonry with stud,

uninsulated
Single stud, uninsulated
Site Performance vs. Laboratory

Performance
As houses are not built like laboratories, it is unlikely that
performance measured in ideal test conditions will be
achieved in a building. Designers should take care to select
systems compatible with the support structure to provide the
desired level of insulation.
Chance of
Gaps Being Left
Unsealed
Single stud, insulated
Double stud, insulated
The Red Book
Background Noise
Low levels of noise transmitted from other areas can be
partially obscured by background noise.
Where the background noise level is low, such as in remote
areas, consideration should be given to providing a higher
than standard level of sound insulation.
Variation in occupant Perception of

Noise
Tolerance for noise varies greatly between people, and
variations of up to 15dB can be considered acceptable.
This means consideration should be given to the occupants
expectation of the internal acoustic environment. Users of
concert halls and practice rooms may have higher acoustic
expectations than guests of inner city hotels.
Minimum Performance Levels for

Internal Walls and Ceilings
The BCA sets out minimum performance levels for internal
walls and ceilings based on acceptable standards for
affordable housing. The performance requirements are in
terms of Rw, Rw+Ctr and Ln,w+CI.
These levels may need to be increased for:
Va r i a t i o n i n o c c u p a n t p e r c e p t i o n s o f n o i s e ,
e.g. high, medium or low cost housing.
Background noise levels may be very low.
The lack of simplicity in construction could reduce actual
performance.
Minimum Performance Levels

for external Walls
The BCA does not set minimum performance levels of
transmission for external walls. Guidance should be sought
from an acoustic consultant or local authority for setting
the design requirements of these elements, as they may be
affected by road or aircraft noise.
Issues that may affect the design levels for external walls are:
Background noise levels are low.
Flanking transmission of the surrounding structure,
particularly at windows and doors.
performance.
Gaps, Crack and holes
Background noise levels are low.
Small openings allow airborne sound to pass through

an element and can significantly reduce sound insulation
performance. For optimum sound insulation, the element
must be airtight.
Flanking transmission of the surrounding structure.

Lightweight structures can be more prone to low frequency
flanking.
Perimeters and penetrations for services must be sealed with

an acoustic sealant that is capable of accommodating the
expected building movement.
The presence of services will vary which BCA provisions

are applicable, and could mean separate construction is
required.
For systems that are multi-layered, such as masonry

composite systems, each layer must be air tight, as services
such as power points and switches can act as airborne
flanking paths. To remedy this, consider using acoustic rated
power boxes, the Gyprock Silencer, and insulation in the
cavity. Refer to flanking details, Section Z.
Local authorities have higher or additional requirements.

performance.
Minimum Performance Levels

for Services
The BCA sets out minimum performance levels for isolation
of noise from services based on acceptable standards for
affordable housing. The performance levels are in terms of
Rw and Rw+Ctr.
These levels may need to be increased for:
The nature of the noise source and adjacent occupant
activity. Some noises are particularly annoying to
occupants.
Systems that meet the new BCA minimum Rw+Ctr
requirements may have lower performance than systems
that meet the corresponding Rw requirements.
The Red Book
A23
Definitions
Rw Weighted Sound Reduction Index. A measure of
the sound insulation performance of a building element. Rw
is a laboratory measurement similar to STC.
Rw is measured and calculated using the procedures from
AS1276 and AS1191. The related field measurement is
abbreviated as DnT,w.
The higher the number the better the insulation
performance.
dnT,w Weighted Standardised Field Level difference.
A measurement of the sound insulation performance of a
building element. It describes the difference in noise level on
each side of a wall or floor, and indicates the level of speech
privacy between spaces. It is measured in the field and is
therefore subject to the inherent inaccuracies involved in
such a measurement.
The higher the number the better the insulation
performance.
Ctr A spectrum adaptation value used to modify the sound
insulation performance of a wall or floor. Sound insulation
performance can be described by Rw or the DnT,w but these
are not accurate for all noises, especially for low frequency
bass noise from modern stereo systems. Ctr values are
negative value which is added to either the Rw or DnT,w.
AS/NZS1276 - sets out testing methodologies for the sound
insulation properties of building elements and incorporates
these factors and explains their use.
Smaller negative Ctr values are more favourable than large
negative values.
dB(A) The A-scale and dB(A) noise level are used to
degrade the performance of a sound level meter to simulate
what humans hear. The human ear is not a perfect listening
device, it is poor at hearing low frequency noise. dB(A) is
used to compare measured sound with perceived sound.
A number of noise criteria refer to, and are measured in
dB(A). The larger the dB(A) level the louder the noise.
Ln,w Weighted Normalised Impact Sound Pressure
Level. A measure of the noise impact performance of a
floor/ceiling. It is measured in very controlled conditions
in a laboratory and is characterised by how much impact
sound reaches the receiving room via the ceiling/floor from
a standard tapping machine test.
LnT,w Weighted Standardised Field Impact Sound

Pressure Level. A measure of the noise impact performance
of a floor/ceiling. It is similar to Ln,w except it is measured in
the field and is therefore subject to the inherent inaccuracies
involved in such a measurement.
The lower the number the better the performance.
C I A spectrum adaptation term used to modify the
measured impact sound pressure level, Ln,w or LnT,w.
Impact sound is generated by a laboratory grade tapping
machine placed on the floor to be tested. This tapping machine
does not accurately simulate the noise of a persons foot steps
on the floor above, so the CI term was developed to more
closely simulate foot step noise.
The term is defined in ISO717-2. The Ln,w or LnT,w alone
is sufficient to characterise concrete floors covered with
carpet. Other types of floors such as timber joist floors, bare
concrete floors or polished timber or tiles laid on concrete
floors require the CI term to properly characterise footstep
noise.
Timber joist floors can have a CI value slightly positive.
Concrete floors with an effective covering such as carpet
have CI terms approximately equal to 0dB. Concrete floors
with a hard, or less effective covering, can have CI terms
varying between 15dB and 0dB.
NRC Noise Reduction Coefficient. A measure of the
ability of a material to absorb sound.
NRC is generally a number between 0 and 1. A material with
an NRC rating of 1 absorbs 100 % of incoming sound, that
is, no sound is reflected back from the material.
STC Sound Transmission Class. A measure of the
sound insulation performance of a building element used
in the BCA prior to 2000. It is measured in very controlled
conditions in a laboratory.
CAC Ceiling Attenuation Class A single number rating
from a laboratory test to measure sound reduction between
rooms via the ceiling.
dnc,w Weighted Suspended Ceiling Normalised Level
difference. Similar to CAC.
Source: Building Code of Australia, Sound Insulation
Guideline.
The lower the number the better the performance.
A24
The Red Book
Section B
Contents
The Red Book
Stud Selection Tables

Introduction
Design Considerations
Installation
Components
B2 B4
B4
B4 B6
B6 B7
B7 B8
Internal Wall System Specifications

Single Stud
Rondo Quiet Stud
Staggered Stud
Double Stud
StrataWall
Party Wall
SecurityWall
Resilient Mount
Cinema Wall
Studs Lined One Side
Shaft Wall
Laminated Services
B9 B12
B13
B14 B16
B17 B19
B20 B22
B23 B24
B25 B27
B28
B29
B30 B31
B32
B33 B36
External Wall System Specifications

Steel Cladding
ExpressWall
RendaLine
Cladding On Battens
Texture Base Sheet For Houses
Concrete
Hebel Powerpanel
Masonry
B37
B38 B39
B39 B41
B42
B43
B44
B44
B45
Columns & Beams
B46
ECO8 Internal Wall System Specifications
B47 B52
System Installation Details
B53 B65
B1

Tables B1 to B8 provide stud selection information suitable for all CSR Gyprock & Cemintel non-fire rated and fire rated
non-loadbearing internal wall systems that are to be designed for a Uniform Distributed Load (UDL) of 0.25kPa, 0.35kPa or
0.50kPa as detailed in each table.
Refer to Rondo for other design pressures and for loadbearing walls.
TABLE B1: MAXIMUM WALL HEIGHT WITH RONDO LIPPED STEEL STUDS NON-LOADBEARING WALLS
WALLS GENERALLY (LOAD = 0.25kPa)
Wall Frame and
Lining Configuration
600mm max. cts
600mm max. cts
300mm 300mm
max. cts max. cts
300mm 300mm
max. cts max. cts
Boxed
Studs
Stud Size
BMT
Linings (mm)
10
13
16
CSR 080(-/180/180)
10
13
0.5
51
0.75
0.5
64
0.75
1.15
2.77
3.20
3.38
2.60
2.32
2.32
2.91
3.32
3.52
2.60
2.60
2.60
3.33
3.72
3.91
3.30
2.72
2.72
3.93
4.22
4.35
3.60
3.13
3.25
4.17
4.43
4.52
4.30
3.53
3.58
16
2.32
2.60
2.75
3.28
3.59
10
2.37
2.83
3.51
10
2.93
3.61
76
0.55 0.75 1.15
Maximum Wall Height (m)
3.70 4.43 4.65
4.13 5.02 5.22
4.30 5.25 5.42
3.80 4.10 5.00
3.20 3.58 4.05
3.24 3.82 4.05
3.25
3.87
4.05
0.55
92
0.75
1.15
150
0.75 1.15
4.54
4.94
5.18
4.40
3.61
3.61
4.83
5.50
5.71
4.80
4.13
4.18
5.11
5.75
5.92
5.00
4.69
4.69
6.55
6.99
7.19
7.00
5.33
5.37
7.22
7.54
7.65
7.65
6.81
6.81
3.61
4.20
4.69
5.37
6.81
TABLE B2: MAXIMUM WALL HEIGHT WITH RONDO LIPPED STEEL STUDS NON-LOADBEARING WALLS
WALLS OF SHAFTS AND FIRE ISOLATED EXITS (LOAD = 0.35kPa)
Wall Frame and
600mm max. cts
600mm max. cts
300mm 300mm
max. cts max. cts
300mm 300mm
max. cts max. cts
Boxed
Studs
Stud Size
BMT
Linings (mm)
0.5
51
0.75
0.5
64
0.75
1.15
10
2.42
2.55
2.93
3.49
3.70
3.25
3.81
3.81
13
2.81
2.92
3.29
3.75
3.94
3.65
4.43
16
3.00
3.12
3.45
3.84
3.99
3.78
4.62
92
0.75
1.15
150
0.75 1.15
3.81
3.81
3.81
3.81
3.81
4.60
4.39
4.84
5.06
5.71
5.71
4.77
4.60
5.01
5.20
6.37
6.89
CSR 080(-/180/180)
2.60
2.60
3.30
3.60
4.30
3.78
4.10
4.77
4.40
4.80
5.00
6.37
6.89
10
2.07
2.34
2.34
2.80
3.15
2.76
3.20
3.62
3.06
3.70
3.81
3.81
3.81
13
2.07
2.34
2.34
2.80
3.17
2.76
3.37
3.62
3.06
3.70
4.20
4.83
5.53
16
2.07
2.34
2.34
2.90
3.18
2.76
3.41
3.62
3.06
3.70
4.20
4.83
5.53
10
2.14
2.59
3.15
10
2.65
3.26
NOTES:
Deflection Limit is span/240 to a maximum of 30mm, in accordance
with BCA Specification C1.8.
Tabulated heights do not include axial loads (except self weight) or
shelf loading.
Loadings: Table B1 Pultimate = 0.375 kPa, Pservice = 0.25 kPa.
Loadings: Table B2 Pultimate = 0.525 kPa, Pservice = 0.35 kPa.
Walls are not for external applications.
All loadings in accordance with AS1170:2002.
Walls analysed in accordance with AS4600:1996.
Noggings in accordance with Table B3.
Staggered stud walls use 64mm lipped studs in 92mm track with
Gyprock Staggered Stud Clip.
Tables have been prepared by Rondo Building Services Pty Ltd.
B2
76
0.55 0.75 1.15 0.55
TABLE B3: MINIMUM NUMBER OF NOGGINGS

Lined Both Sides
Lined One Side*

Staggered Studs
Wall Height (m)

0 - 4.4
4.4 - 8.8
0.0 - 3.0
3.0 - 6.0
6.0 - 8.0
All
Number of Noggings
(equally spaced)
0
1
1
2
3
0
NOTE: * Plus noggings at head. Refer to details in Section Z.
The Red Book
TABLE B4: MAXIMUM WALL HEIGHT FOR RONDO QUIET STUD WALLS GENERALLY (UDL = 0.25kPa)
Wall Frame and Lining Configuration
Stud Spacing (m)
Minimum Plasterboard
Thickness (mm)
600
450
10
3.70
4.02
13
4.13
4.41
16
4.30
4.58
Spacing
TABLE B5: MAXIMUM WALL HEIGHT FOR GYPROCK SECURITYWALL SYSTEMS (UDL = 0.25kPa)
Wall Frame and Lining Configuration
Security Panel
Minimum Lining Thickness (mm)
13mm GYPROCK Plasterboard CD
3.0
13mm GYPROCK FYRCHEK or EC08 FIRE / IMPACT
4.0
3.0
13mm GYPROCK FYRCHEK or EC08 FIRE / IMPACT
5.2
27
50
TABLE B6: MAXIMUM WALL HEIGHT FOR GYPROCK STRATAWALL WITH H-STUDS AT 600mm CENTRES
Wall Type
or
Wind Loading
Pservice
kPa

25H55 H-Studs at 600mm ctrs
50H55 H-Studs at 600mm ctrs
0.25
3.0
0.25
3.0
or
TABLE B7: MAXIMUM WALL HEIGHT FOR GYPROCK STRATAWALL WITH C-STUDS AT 600mm CENTRES WALL
SYSTEM FRL /60/60
Wall Type
FRL/60/60
Wind
Loading
Pservice
kPa
0.25
0.35
0.50
Maximum Wall Height (m with Rondo C-Studs at 600mm centres

Wall Lining
(both sides)
Stud C64
Stud C76
Stud C92
0.50
0.75
1.15
0.55
0.75
0.55
0.75
13mm GYPROCK
plasterboards
2.72
3.13
3.53
3.20
3.30*
3.30*
3.30*
13mm FYRCHEK
2.72
3.13
3.53
3.20
3.58
3.60*
3.60*
6 or 9mm
CeminSeal
Wallboard
2.72
3.00*
3.00*
3.00*
3.00*
3.00*
3.00*
13mm GYPROCK
plasterboards
2.34
2.80
3.15
2.76
3.20
3.06
3.30*
13mm FYRCHEK
2.34
2.80
3.15
2.76
3.20
3.06
3.60*
6 or 9mm
CeminSeal
Wallboard
2.34
2.80
3.00*
2.76
3.00*
3.00*
3.00*
13mm GYPROCK
plasterboards
1.95
2.47
2.80
2.32
2.73
2.56
2.96
13mm FYRCHEK
1.95
2.47
2.80
2.32
2.73
2.56
2.96
6 or 9mm
CeminSeal
Wallboard
1.95
2.47
2.80
2.32
2.73
2.56
2.96
NOTE: * Height limits apply for FRL /90/90 and FRL 120/120. Refer to N GYP949 Gyprock StrataWall Installation Guide.
The Red Book
B3
TABLE B8:
MAXIMUM PERMITTED WALL HEIGHT/WIDTH FOR
LAMINATED SERVICES SYSTEMS (0.35 kPa)
Wall Height (maximum)
System N
2400
3000
3600
7200
Wall Width (maximum)

CSR967-S
Structural Design
1200
1200
1200
NA
1200
1200
1200
1200
2200
2100
2000
NA
CSR968-SA
3100
2700
2600
1200
CSR969-SA
4200
3200
3000
NA
CSREC 031-S
CSR968-S
CSR967-SA
CSREC 031-SA
Design
Considerations
-S = Screw Only Plasterboard Fixing

-SA = Screw and Adhesive Plasterboard Fixing
NA = Not Applicable
All walls must be designed for the applied loads. Guidance

is given for the selection of Rondo studs for non-loadbearing
internal walls only.
Loadbearing walls and walls subject to wind pressures shall
be appropriately designed to meet the relevant Australian
Standards or construction manuals.
Non-Loadbearing Walls
Maximum wall heights are shown in Tables B1 to B8. These
walls are designed for lateral loads only, using the composite
action of the frame and sheeting.
Non-loadbearing walls in this manual have been designed
as follows:
Introduction
CSR Gyprock and Cemintel steel frame wall systems
use zinc coated steel components with one or more layers
of Gyprock plasterboard and/or Cemintel fibre cement
linings fixed to one or both sides. A wide choice of systems
is available for both fire rated and non-fire rated applications
in non-loadbearing and loadbearing situations.
These wall systems are most often used in internal nonloadbearing applications, including commercial, industrial,
institutional, residential and high-rise residential construction.
Systems are also available for external walls.
Minimum design pressure of 0.25kPa and a maximum

deflection of (height 240) or 30mm maximum. (Based
on BCA Specification C1.8, 3.4 (b))
Fire rated walls have been designed to meet the
requirements of BCA Specification C1.8 Clause 3.4
Walls generally.
Internal wall studs are friction fitted into tracks with no
clearance at the bottom and a minimum allowance for
vertical expansion of 15mm at the top. Where vertical building
movement is expected an additional gap is required. In this
case deflection head tracks must be used.
Staggered stud walls using Rondo C studs must use the
CSR staggered stud clip to restrain the stud from twisting.
Insulation may need to be cut to fit between studs at 300mm
centres.
Wall tracks must be fixed to floors and ceilings at 600mm
maximum centres. Each plate fixing is required to withstand
a shear load of 0.75kN for a UDL of 0.25kPa and 1.1kN for
UDL of 0.35kPa.
Tall residential buildings often have exterior operable doors
and windows, resulting in internal walls being subject to
wind pressure. In these cases, walls must be designed for
the appropriate loads.
B4
The Red Book
Loadbearing Walls
Framing must be made from steel of up to 2.4mm BMT.
Walls designed as loadbearing and lined with GYPROCK

FYRCHEK meet the requirements of BCA Specification C1.8
Clause 3.4 Walls generally.
Wall plates must be fixed to the fire rated support structure

with steel fasteners such as expansion anchors, easy drive
masonry anchors and power driven fasteners.
The building designer must ensure loadbearing walls have

been designed:
Fyrchek and Cemintel fibre cement products must be

screw fixed only, adhesive is not permitted. Linings that
do not contribute to the system FRL may use adhesive.
To resist all applied loads.

To be in accordance with AS4600.
Assuming no contribution to axial strength is required of
the wall linings.
To meet the stated Fire Resistance Level (FRL), the axial load
capacity of some wall systems is reduced. This is a result of
the steel weakening at high temperature during a fire test.
The systems are noted with an Axial Capacity Reduction
percentage (ACR%). For these systems, the designer must
increase the applied loads before selecting stud size to
compensate for the axial capacity reduction percentage, as
shown in the system specification.
The capacity of head and base tracks for walls subject to
wind loads must be checked. Typically, studs are cleated
at head and base with a Rondo angle bracket. Contact
Rondo for more information on designing walls subject to
wind loads.
Fire Resistance
The steel frame wall systems in this manual are suitable
for the stated FRL when designed in accordance with the
structural considerations above. Wall system ratings apply
in either direction, unless noted otherwise.
CSR fire rated steel stud wall systems have been designed
with fire protection that limits the temperature of the
steel framing to a maximum of 450C at the FRL stated.
Therefore the structural design of the framing need only
provide for normal temperature conditions, and no additional
consideration of fire rating is required. In some systems this
temperature is exceeded and the axial capacity of the stud
must be reduced to compensate for the loss of strength. The
percentage reduction is noted for each affected systems.
To protect structural steel beams and columns that are
entirely within a wall, the FRL of the wall system must be at
least equivalent to that required by the structural member.
For example, a wall system with FRL 90/90/90 provides FRL
90// for a steel column within the wall.
Framing & Lining
Steel framed walls required to have an FRL must comply
with the following:
In wet areas, Gyprock Fyrchek MR must be used in lieu

of Gyprock Fyrchek.
For single layer systems and the first layer of multi-layer
systems, butt joints must be backed by either a stud or
nogging.
For multi-layer vertically sheeted applications, outer layer
butt joints may be reinforced using laminating screws
without the need for framing support.
Joints in the outer layer of all systems lined with
plasterboard or Wallboard must be set with Gyprock
paper tape. As a minimum, a single coat finish may be
used.
All joints in Texture Base Sheets must be formed on
framing.
Joints in external systems lined with Cemintel Texture
Base Sheet must be set with the tape and compound
recommended for the texture coating system.
For additional information on frame design and detailing,
including treatment at junctions, sub floor and roof areas,
cavity barriers and penetrations, refer to brochure NGYP544,
Gyprock Steel Frame Wall Systems.
The Fire Resistance Level (FRL) of the systems detailed in
this section will not be detrimentally affected by:
Increasing the thickness of the wall.
Increasing the cross-sectional dimensions of the framing
elements.
Decreasing the stud spacing.
Decreasing the fixing centres of wall sheet materials.
The inclusion of bulk cavity insulation materials such as
Glasswool, Rockwool and Polyester.
The use of Fyrchek MR, Impactchek, EC08 Fire or
EC08 Impact plasterboard in lieu of Fyrchek plasterboard
of the same thickness.
Additional layers of plasterboard or Cemintel fibre cement.
Wall curved in plan with a radius of curvature no less than
3m.
The attachment of light weight fixtures through to the framing.
The addition of an exterior cladding.
The Red Book
B5
Caulking
To attain the specified FRL, all perimeter gaps and
penetrations must be carefully and completely filled with
appropriate caulking material. CSR Gyprock Fire Mastic or
other tested fire and acoustic rated material of equivalent or
better performance must be used.
Vermiculite plaster has no capacity to accommodate building
movement and may not be suitable for use as a general purpose
fire rated caulking. Its use is specified in some wall/ceiling
junctions, refer to brochure NGYP570, Gyprock Ceiling
Systems Installation Guide.
Acoustic Performance
The acoustic performance of wall systems is expressed in
terms of Rw and Rw+Ctr where appropriate. The performance
of the as-built system may be affected by sound flanking, the
effectiveness of workmanship and caulking, the presence
and treatment of penetrations, and the inclusion of structural
elements and bridging items. Refer to Section A for detailed
information on addressing these issues.
General Notes.
The acoustic performance of systems may be adversely
affected by the use of studs with higher BMT or closer
spacings than those specified, or by the use of additional
linings fixed with battens.
In non-fire rated systems, to attain the stated acoustic
performance, use Gyprock Wet Area Acrylic Sealant,
Gyprock Fire Mastic or other tested acoustic rated material
of equivalent or better performance.
The acoustic performance of CSR wall systems is not
adversely affected by:
The order of lining sheets that are fixed direct to framing.
The substitution of Aquachek for Gyprock Plasterboard
CD of the same thickness.
The substitution of Gyprock Fyrchek MR for Fyrchek of
the same thickness.
Installation
Framing
CSR recommends steel components manufactured by
Rondo Building Services Pty Ltd. Additional information
on the steel components can be obtained from the Rondo
Building Services Pty Ltd, telephone 1300 367 663. Other
steel components of equivalent performance may be used,
however, it is the responsibility of the manufacturer of the
component to substantiate equivalent performance with the
recommended component.
For detailed information on wall junctions, intersections, frame
attachments and penetrations, refer to guide NGYP544,
Gyprock Steel Frame Wall Systems.
Shaftwall , SecurityWall , Party Wall, Cinema Wall,
Laminated systems and StrataWall systems have additional
installation details. Refer to the relevant installation guide.
Walls curved in plan may be built with steel stud frames.
Selection information on stud centres and plasterboard
thickness for various curvatures can be found in brochure
NGYP544, Gyprock Steel Frame Wall Systems.
Wallboard & Plasterboard Fixing

Walls may be built to achieve a particular Level of Finish
as defined in AS/NZS2589.1. The Level of Finish specified
can have requirements for frame alignment, jointing and
back blocking methods, and sheet orientation. CeminSeal
and Gyprock plasterboard may be installed vertically or
horizontally, although for some Levels of Finish horizontal
sheeting must be used.
Walls lined with Gyprock plasterboard or CeminSeal
Wallboard may be finished with tiles. For tiles greater than
32kg/m 2 or over 6.5mm thickness, specific installation
details apply. Refer to the appropriate installation manual.
Plasterboard Jointing & Finishing

NGYP547 and Cemintel Wet Area Lining Systems,
NFC101 for detailed jointing and finishing information.
It should be noted that:
Multi-layered systems only require jointing and finishing of
the outer layer.
It is recommended that a water resistant taping
compound, such as Gyprock Wet Area Base Coat be
used at horizontal and vertical joints within wet areas such
as showers.
B6
The Red Book
Control Joints
Control joints must be installed to allow for structural
movement. Allowance for movement must be made through
the frame, lining and any tiles.
Components
Lining & Fixing Materials
Control joints must be installed at all construction joints in

the building and at the following locations:
Refer to Section A for detailed information on CSR lining

products, fixings, adhesive and accessories.
Non-tiled internal walls with fibre cement outer layer at

7.2m maximum centres.
For details on Cemintel Texture Base Sheet, refer to

brochure NFC122, Cemintel Texture Base Sheet & Texture
Coating System.
Tiled internal walls with fibre cement outer layer at 4.2m

maximum centres.
Walls with plasterboard outer layer at 12m maximum
centres.
External walls refer to the appropriate installation
manual.
At junctions with other building elements.
At changes of lining material.
At changes of structural support systems.
At each storey or rise of studs.
Framing
Building Services Pty Ltd.
Other steel components of equivalent performance may be
used, however, it is the responsibility of the manufacturer of
the component to substantiate equivalent performance with
the recommended component.
External Walls
CSR external wall systems rely on a range of cladding
systems to provide weather resistance. There is a range of
effectiveness of these systems, and CSR recommends the
cladding be installed with a drained cavity. Cavity systems
allow drainage and drying of any water that penetrates, and
are known to have good long-term performance.
Sarking is also recommended to provide additional weather
protection to framing and lining.
External walls require specific design for condensation
control and energy efficiency, depending on the climate and
internal environment. Contact CSR Bradford for information
on thermal insulation systems and products.
TABLE B9: RONDO STEEL STUD AVAILABILITY

Stud Depth (mm)
Stud
BMT (mm)
51
64
76
92
150
0.50*
0.55*
0.75
1.15
NOTE: * Rondo Hemmed Stud
TABLE B10: QUIET STUD

Stud Depth 92mm
Stud
BMT (mm)
0.55
Length (mm)
2700
3000
3600
Stud BMT
Stud Depth
Length
TABLE B11: RONDO C-H STUD

Component
The Red Book
(mm)
(mm)
(mm)
64CH55
0.55
64
3000 / 3600
64CH90
0.90
64
4500
102CH90
0.55
102
3600 / 4300
102CH90
0.90
102
5500
B7
RONDO LIPPED STUD PROFILES
RONDO 501 CONTINUOUS

NOGGING BRACKET
35.0
35.5
Supplied in 2400mm lengths for

on-site cutting to length
8.15
8.0
30
37
Depth
Depth
30
BMT
0.75
BMT
1.15
18
8.0
6.35
35.0
33.5
RONDO STUD CLIP 126
RONDO QUIET STUD

45mm
6mm
GYPROCK STAGGERED STUD CLIP
92mm
Rondo
64mm
Lipped
Steel
Stud
Rondo
92mm
Track
6mm
43mm
CSR Gyprock
Staggered Stud Clip
RONDO HEMMED STUD

32.8
5.0
Depth
BMT
0.50/0.55
5.0
35.4
RONDO C-H STUD

35mm
64 or 102mm
25mm
35mm
B8
The Red Book

ACOUSTIC
OPINION
PKA-052

NOTES:
FRL
Report/Opinion
SYSTEM
N
STUD DEPTH mm
WALL LININGS
BOTH SIDES
1 x 10mm GYPROCK
Plasterboard CD.
BOTH SIDES
1 x 13mm GYPROCK
Plasterboard CD.
//
SIDE ONE
1 x 13mm GYPROCK
AQUACHEK Plasterboard.
//
CSR 015
36/26 37/27 38/29 40/31 42/33

//

WALL THICKNESS mm
42/33 42/33 43/34 45/36
39/31 39/32 40/33 41/34 43/36
77
41/31 42/32 43/33 45/35

90
102
118
176
44/35 44/35 45/36 47/38
39/31 40/33 41/34 42/35 44/37
77
42/32 43/33 44/34 46/36

90
102
118
176
(a) Nil
38/30 39/32 40/33 42/35 45/38
43/33 44/35 45/36 47/38 49/40
WALL THICKNESS mm
46/37 46/37 48/39 50/41
43/35 43/36 44/37 46/39 48/41
90
45/35 46/36 48/38 50/40

103
115
131
189
(a) Nil
35/28 37/30 38/31 40/33 43/37
40/31 42/33 43/34 45/36 47/39

44/35 44/35 46/37 48/40
40/33 41/34 42/35 44/37 46/40
71
43/33 44/34 46/36 48/39

84
96
112
170
(a) Nil
37/30 38/31 40/33 41/34 44/38
42/33 43/34 45/36 46/37 48/40

WALL THICKNESS mm
The Red Book
170
39/29 41/32 42/33 43/34 45/36
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
112
WALL THICKNESS mm
//
96
35/27 37/30 37/30 38/31 41/34
2 x 13mm GYPROCK
Plasterboard CD.
BOTH SIDES
84
(a) Nil
CSR 032
71
38/27 39/29 41/31 43/33
39/29 40/31 41/32 42/33 44/35
SIDE TWO
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
34/26 35/28 36/29 37/30 40/33
BOTH SIDES
39/29 39/30 41/32 43/34
CSR 025
36/28 36/28 37/30 39/32 41/34
(a) Nil
1 x 13mm GYPROCK
Plasterboard CD.
1 x 13mm GYPROCK
Plasterboard CD.
150
31/23 32/24 33/26 35/28 38/31
SIDE TWO
SIDE ONE
92
WALL THICKNESS mm
CSR 011
76
(a) Nil
WALL THICKNESS mm
CSR 010
64
Rw / Rw+Ctr
CSR 005
//
51
CAVITY INFILL
45/36 46/37 47/38 49/41
42/35 42/35 44/37 45/38 47/41
77
44/34 46/36 47/37 49/40

90
102
118
176
B9

ACOUSTIC
OPINION
PKA-052

NOTES:
FRL
Report/Opinion
SYSTEM
N
STUD DEPTH mm
WALL LININGS
BOTH SIDES
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 039
43/36 44/37 46/40 47/41 49/43
48/39 49/40 51/43 52/44 53/45

91
50/40 52/43 53/44 54/45

104
116
132
190
46/37 48/39 49/40 50/41 52/44
SIDE TWO
2 x 13mm GYPROCK
SOUNDCHEK
Plasterboard.
SIDE ONE
WALL THICKNESS mm
WALL THICKNESS mm
90
49/39 50/40 51/41 53/44

103
115
131
189
44/35 43/34 44/35 46/37
39/31 41/34 41/34 42/35 44/37
77
43/33 43/33 44/34 46/36

90
102
118
176
(a) Nil
34/27 36/29 37/30 38/31 41/34
39/30 41/32 42/33 43/34 45/36

44/35 44/35 45/36 47/38
39/32 40/33 41/34 42/35 44/37
63
42/32 43/33 44/34 46/36

76
88
104
162
(a) Nil
39/32 40/33 41/34 42/35 45/39
44/35 45/36 46/37 47/38 49/41

WALL THICKNESS mm
1 x 6mm CeminSeal
Wallboard.
39/29 42/33 42/33 43/34 45/36

SIDE ONE
46/39 47/40 48/41 49/42 51/45

1 x 9mm CeminSeal
Wallboard.
50/41 50/41 51/42 53/45
34/26 37/30 37/30 38/31 41/34
1 x 13mm GYPROCK
Plasterboard CD.
BOTH SIDES
(a) Nil
SIDE TWO
CSR 601
B10
WALL THICKNESS mm
//
51/42 52/44 53/45 54/46
41/34 43/36 44/37 45/38 48/42
1 x 6mm CeminSeal
Wallboard.
CSR 605
48/41 48/41 50/44 51/45 52/46
(a) Nil
BOTH SIDES
//
150
1 x 13mm GYPROCK
SOUNDCHEK
Plasterboard.
CSR 600
//
92
SIDE ONE
1 x 13mm GYPROCK
IMPACTCHEK.
//
76
(a) Nil
WALL THICKNESS mm
CSR 033
64
Rw / Rw+Ctr
CSR 035
//
51
CAVITY INFILL
47/38 47/38 48/39 50/42
44/37 44/37 45/38 46/39 48/42
69
46/36 47/37 48/38 50/41

82
94
110
168
(a) Nil
34/26 35/28 37/30 37/30 41/34
39/29 40/31 42/33 42/33 45/36
SIDE TWO
1 x 13mm GYPROCK
Plasterboard CD.

WALL THICKNESS mm
43/34 44/35 44/35 47/38
39/31 39/32 41/34 41/34 44/37
70
41/31 43/33 43/33 46/36

83
95
111
169
The Red Book

ACOUSTIC
OPINION
PKA-052

NOTES:
Acoustic performance valid for studs of 0.50 BMT.
*ACR = Axial Capacity Reduction
FRL
Report/Opinion
SYSTEM
N
CSR 606
STUD DEPTH mm
WALL LININGS
SIDE ONE
/60/60
30/30/30
60/60/60*
41/31 43/34 44/35 45/36 48/39

FAR2357
WALL THICKNESS mm
/90/90
60/60/60
FAR2357
114
172
36/29 38/31 38/31 40/33 43/37

42/33 44/35 44/35 46/37 48/40

45/36 44/35 46/37 48/40
41/34 42/35 42/35 44/37 46/40
77
44/34 44/34 46/36 48/39

90
102
118
176
45/36 47/38 47/38 48/39 50/42
SIDE TWO
1 x 16mm GYPROCK
FYRCHEK plasterboard
(against studs).

WALL THICKNESS mm
SIDE ONE
45/38 46/39 46/39 47/40 49/43
89
48/38 48/38 49/39 51/42

102
114
130
188
41/32 42/33 44/35 45/36 47/39

45/36 46/37 47/38 49/41
41/34 41/34 43/36 44/37 46/40
83
43/33 45/35 46/36 48/39

96
108
124
182
(a) Nil
40/33 42/35 43/36 44/37 47/41
45/36 47/38 48/39 49/40 51/43
SIDE TWO
FAR2357
2 x 13mm GYPROCK
FYRCHEK Plasterboard.
1 x 16mm GYPROCK
49/40 48/39 49/40 51/43
36/29 37/30 39/32 40/33 43/37
1 x 13mm GYPROCK
SIDE ONE
(a) Nil
/90/90
and
30/30/30
The Red Book
98
WALL THICKNESS mm
*ACR 5%
From Fyrchek
lined side ONLY
86
1 x 16mm GYPROCK
FYRCHEK plasterboard.
CSR 038
73
44/34 45/35 46/36 49/39
1 x 16mm GYPROCK
FAR2357
/60/60
30/30/30
60/60/60*
40/33 42/35 42/35 43/36 46/40
BOTH SIDES
CSR 040
41/33 42/35 43/36 44/37 47/40
(a) Nil
CSR 055
*ACR15%
45/36 45/36 46/37 49/40
SIDE ONE
1 x 6mm CeminSeal
Wallboard.
/90/90
60/60/60
90/90/90*
(a) Nil
WALL THICKNESS mm
CSR 615
150

1 x 13mm GYPROCK
*ACR15%
92
36/28 38/31 39/32 40/33 44/37
1 x 13mm GYPROCK
Plasterboard CD.
BOTH SIDES
76
(a) Nil
SIDE TWO
CSR 050
64
Rw / Rw+Ctr
1 x 9mm CeminSeal
Wallboard.
//
51
CAVITY INFILL
WALL THICKNESS mm
50/41 50/41 51/42 53/45
45/38 46/39 47/40 48/41 50/44
90
48/38 49/39 50/40 52/43

103
115
131
189
(a) Nil
35/27 37/30 37/30 39/32 42/35
40/30 42/33 42/33 44/35 46/37
SIDE TWO
1 x 13mm GYPROCK
Plasterboard CD.

WALL THICKNESS mm
44/35 43/34 45/36 47/38
40/32 41/34 41/34 43/36 45/38
80
43/33 43/33 45/35 47/37

93
105
121
179
B11

ACOUSTIC
OPINION
PKA-052

NOTES:
FRL
Report/Opinion
SYSTEM
N
STUD DEPTH mm
WALL LININGS
*ACR15%
FAR2357
CAVITY INFILL
CSR 614
43/36 44/37 46/40 46/40 49/43

48/39 49/40 51/43 51/43 53/45
1 x 6mm CeminSeal
Wallboard.
1 x 13mm GYPROCK
BOTH SIDES
FAR2357
1 x 6mm CeminSeal
Wallboard.
CSR 611
BOTH SIDES
CeminSeal
1 x 6mm
Wallboard (against studs).
1 x 16mm GYPROCK
FAR2357
CSR 075
*ACR10%

WALL THICKNESS mm
130
188
52/43 52/44 53/45 54/46
49/42 49/42 50/44 51/45 52/46
95
51/41 52/43 53/44 54/45

108
120
136
194
44/37 45/38 46/40 47/41 49/43

49/40 50/41 51/43 52/44 53/45

52/43 52/44 53/45 54/46
49/42 49/42 50/44 51/45 52/46
95
51/41 52/43 53/44 54/45

108
120
136
194
(a) Nil
44/37 45/38 46/40 47/41 49/43
49/40 50/41 51/43 52/44 53/45

52/43 52/44 53/45 54/46
49/42 49/42 50/44 51/45 52/46
103
51/41 52/43 53/44 54/45

116
128
144
202
(a) Nil
45/38 47/41 48/42 49/43 51/45
BOTH SIDES (ANY ORDER)
50/41 52/44 53/45 54/46 55/47
1 x 9mm CeminSeal
Wallboard.
1 x 16mm GYPROCK

54/46 54/46 55/47 56/48
50/43 51/45 52/46 53/47 54/48
101
53/44 54/45 55/46 56/47

114
126
142
200
(a) Nil
43/36 45/39 46/40 47/41 49/43
48/39 50/42 51/43 52/44 53/45
BOTH SIDES
2 x 16mm GYPROCK

WALL THICKNESS mm
B12
114
2 x 13mm GYPROCK
CSR 080
FAR2357
102
(a) Nil
WALL THICKNESS mm
/180/180
and
120/120/120
89
50/40 52/43 52/43 54/45
49/40 50/41 51/43 52/44 53/45
CSR 613
FAR2357
44/37 45/38 46/40 47/41 49/43
WALL THICKNESS mm
/120/120
90/90/90
51/42 52/44 52/44 54/46
BOTH SIDES
FAR2357
48/41 48/41 50/44 50/44 52/46
(a) Nil
WALL THICKNESS mm
/120/120
90/90/90
120/120/120*
150
*ACR15%
*ACR15%
92
(a) Nil
1 x 16mm GYPROCK
(against studs).
/120/120
60/60/60
90/90/90*
76
WALL THICKNESS mm
/90/90
60/60/60
90/90/90*
64
Rw / Rw+Ctr
CSR 610
/90/90
30/30/30
60/60/60*
51
52/44 52/44 53/45 54/46
48/41 49/43 50/44 51/45 52/46
115
51/42 52/43 53/44 54/45

128
140
156
214
The Red Book
Steel Frame Internal Wall Systems Rondo Quiet Stud

ACOUSTIC
OPINION
PKA-052

Rondo Quiet Studs at 600mm maximum centres.
NOTES:
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CSR 043
BOTH SIDES
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
STUD DEPTH mm
CAVITY INFILL (Refer to Section A)
(a) Nil
42/35
50/41
51/42
49/42
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
CSR 048
BOTH SIDES
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
CSR 044
/60/60
30/30/30
60/60/60*
BOTH SIDES
1 x 13mm GYPROCK
*ACR15%
FAR2357
CSR 045
/90/90
and
30/30/30
SIDE ONE (ANY ORDER)

1 x 13mm GYPROCK
1 x 13mm GYPROCK
Plasterboard CD.
SIDE TWO
FAR2357
49/43
57/49
58/50
56/50
(e) 60
Soundscreen
2.0 batts
58/49
WALL THICKNESS mm
144
(a) Nil
41/34
49/40
51/42
48/41
(e) 60
Soundscreen
2.0 batts
51/41
WALL THICKNESS mm
118
(a) Nil
48/42
56/48
58/50
(d) TSB4/ASB4 Polyester batts
56/50
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
/90/90
60/60/60
FAR2357
The Red Book
144
48/42
59/48
1 x 16mm GYPROCK
58/50
56/50
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
CSR 049
57/48
(a) Nil
1 x 6mm CeminSeal
Wallboard.
FAR2357
118
CSR 046
*ACR15%
51/41
(a) Nil
2 x 13mm GYPROCK
/90/90
60/60/60
90/90/90*
92
Rw / Rw+Ctr
57/48
136
(a) Nil
45/38
53/44
54/45
SIDE TWO
52/45
2 x 16mm GYPROCK
54/44
SIDE ONE
1 x 16mm GYPROCK
WALL THICKNESS mm
140
B13
Steel Frame Internal Wall Systems Staggered Stud

ACOUSTIC
OPINION
PKA-052
NOT
Deemed
Discontinuous
Construction

Staggered Steel Studs at 600mm maximum centres
each side. Studs restrained in track or angle at top and
bottom with minimum 22mm clearance between stud and
opposing lining.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CSR 110
BOTH SIDES
1 x 13mm GYPROCK
Plasterboard CD.
//
CAVITY WIDTH mm
BOTH SIDES
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
BOTH SIDES
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
38/31
41/34
46/37
48/39
47/38
49/40
45/38
47/40
47/37
49/39
(e) 60
Soundscreen
1.6
118
176
(a) Nil
41/34
44/38
49/40
51/43
50/41
52/44
48/41
50/44
50/40
52/43
112
170
(a) Nil
42/35
45/39
50/41
52/44
51/42
53/45
49/42
51/45
51/41
53/44
118
176
WALL THICKNESS mm
CSR 135
//
SIDE ONE
(a) Nil
44/37
47/40
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
52/43
54/45
53/44
55/46
51/44
53/46
1.6
53/43
55/45
WALL THICKNESS mm
118
176
(a) Nil
38/31
42/35
46/37
49/40
47/38
50/41
SIDE TWO
45/38
48/41
1 x 6mm CeminSeal
Wallboard.
47/37
50/40
111
169
(a) Nil
39/32
42/35
47/38
49/40
48/39
50/41
46/39
48/41
1.6
48/38
50/40
WALL THICKNESS mm
118
176
SIDE TWO
1 x 6mm CeminSeal
Wallboard.
CSR 631
CSR 632
//
SIDE ONE
1 x 13mm GYPROCK
Plasterboard CD.
//
SIDE ONE
1 x 13mm GYPROCK
Plasterboard CD.
SIDE TWO
1 x 13mm GYPROCK
IMPACTCHEK.
B14
Rw / Rw+Ctr
WALL THICKNESS mm
CSR 131
150
(a) Nil
WALL THICKNESS mm
CSR 125
92
(e) 60
Soundscreen
WALL THICKNESS mm
(e) 60
Soundscreen
The Red Book

ACOUSTIC
OPINION
PKA-052
NOT
Deemed
Discontinuous
Construction

opposing lining.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CSR 132
BOTH SIDES
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
CAVITY WIDTH mm
/60/60
30/30/30
60/60/60*
BOTH SIDES
1 x 13mm GYPROCK
*ACR15%
FAR2357
CSR 153
49/43
51/45
58/50
59/51
58/50
59/51
56/50
57/51
58/49
59/50
(e) 60
Soundscreen
1.6
144
202
(a) Nil
41/34
44/38
49/40
51/43
50/41
52/44
48/41
50/44
50/40
52/43
118
176
(a) Nil
50/44
52/46
58/50
59/51
59/51
60/52
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
57/51
58/52
59/50
60/51
150
208
SIDE ONE
(a) Nil
45/38
48/42
2 x 13mm GYPROCK
53/44
55/47
54/45
56/48
52/45
54/48
1.6
54/44
56/47
WALL THICKNESS mm
131
189
(a) Nil
41/34
44/38
49/40
51/43
50/41
52/44
48/41
50/44
50/40
52/43
124
182
BOTH SIDES
1 x 16mm GYPROCK
*ACR15%
FAR2357
CSR 152
/90/90
30/30/30
SIDE TWO
1 x 13mm GYPROCK
FAR2357
CSR 155
/90/90
60/60/60
90/90/90*
BOTH SIDES
1 x 16mm GYPROCK
*ACR15%
FAR2357
WALL THICKNESS mm
(e) 60
Soundscreen
WALL THICKNESS mm
(a) Nil
47/41
50/44
55/47
57/49
1 x 6mm CeminSeal
Wallboard.
56/48
58/50
54/48
56/50
1.6
56/47
58/49
WALL THICKNESS mm
130
188
CSR 630
/90/90
30/30/30
60/60/60*
*ACR15%
FAR2357
The Red Book
Rw / Rw+Ctr
WALL THICKNESS mm
/90/90
60/60/60
90/90/90*
150
(a) Nil
WALL THICKNESS mm
CSR 150
92
1 x 13mm GYPROCK
(e) 60
Soundscreen
B15

ACOUSTIC
OPINION
PKA-052
TEST
TL461

opposing lining.
NOT
Deemed
Discontinuous
Construction

NOTES:
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CSR 175
/120/120
90/90/90
120/120/120*
BOTH SIDES
2 x 13mm GYPROCK
*ACR10%
FAR2357
CAVITY WIDTH mm
/180/180
120/120/120
FAR2357
B16
BOTH SIDES
2 x 16mm GYPROCK
150
Rw / Rw+Ctr
(a) Nil
48/42
50/44
56/48
57/49
58/50
59/51
56/50
57/51
58/50
58/49
144
202
(a) Nil
48/42
50/44
56/48
57/49
58/50
59/51
56/50
57/51
1.6
57/48
58/49
WALL THICKNESS mm
156
214
WALL THICKNESS mm
CSR 180
92
(e) 60
Soundscreen
The Red Book
Steel Frame Internal Wall Systems Double Stud

ACOUSTIC
OPINION
PKA-052
2 Rows of Steel Studs at 600mm maximum centres with

20mm minimum gap.
Discontinuous
Construction

NOTES:
Unless otherwise specified cavity infill is required in one
stud row only.
FRL
Report/Opinion
SYSTEM
N
CAVITY WIDTH mm
WALL LININGS
CAVITY INFILL
BOTH SIDES
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
CSR 250
BOTH SIDES
1 x 13mm GYPROCK
*ACR15%
FAR2357
*ACR15%
46/40
47/41
48/42
53/45
54/46
55/47
56/48
55/47
55/47
56/48
57/49
52/46
53/47
54/48
55/49
54/45
55/46
56/47
57/48
174
226
276
326
(a) Nil
44/38
45/39
46/40
47/41
52/44
53/45
54/46
55/47
54/46
54/46
55/47
56/48
51/45
52/46
53/47
54/48
53/44
54/45
55/46
56/47
174
226
276
326
(a) Nil
50/44
51/45
52/46
53/47
58/50
59/51
60/52
61/53
1 x 13mm GYPROCK
60/52
60/52
61/53
62/54
57/51
58/52
59/53
60/54
59/50
60/51
61/52
62/53
186
238
288
338
1 x 6mm CeminSeal
Wallboard.
FAR2357
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
CSR 204
/90/90
30/30/30
FAR2357
SIDE ONE
(a) Nil
50/44
51/45
52/46
53/47
2 x 13mm GYPROCK
58/50
59/51
60/52
61/53
60/52
60/52
61/53
62/54
57/51
58/52
59/53
60/54
59/50
60/51
61/52
62/53
193
245
295
345
SIDE TWO (ANY ORDER)

1 x 13mm GYPROCK
1 x 6mm CeminSeal
Wallboard.
The Red Book
300
45/39
WALL THICKNESS mm
CSR 207
/90/90
30/30/30
60/60/60*
250
(a) Nil
WALL THICKNESS mm
/60/60
30/30/30
60/60/60*
200
Rw / Rw+Ctr
CSR 208
//
148
WALL THICKNESS mm
B17

ACOUSTIC
OPINION
PKA-052

20mm minimum gap.
Discontinuous
Construction

NOTES:
stud row only.
CSR 217 and 218 require batts in each stud row.
FRL
Report/Opinion
SYSTEM
N
CSR 217
CAVITY WIDTH mm
WALL LININGS
SIDE ONE
FAR2357
(a) Nil
48/42
49/43
50/44
51/45
(b) 2 x 50 GW Partition 11kg
60/52
60/52
61/53
62/54
61/53
62/54
63/55
63/55
(d) 2 x TSB3/ASB3 Polyester
59/53
60/54
60/54
61/55
1 x 13mm GYPROCK
(e) 2 x 60 Soundscreen 1.6
61/52
62/53
62/53
63/54
187
239
289
339
(a) Nil
44/38
45/39
46/40
47/41
(b) 2 x 50 GW Partition 11kg
56/48
56/48
57/49
58/50
(c) 2 x 75 GW Partition 11kg
57/49
58/50
59/51
59/51
55/49
56/50
57/51
57/51
57/48
58/49
58/49
59/50
180
232
282
332
49/43
51/45
52/46
52/46
1 x 16mm GYPROCK
FAR2357
WALL THICKNESS mm
(e) 2 x 60
Soundscreen
1.6
WALL THICKNESS mm
(a) Nil
CSR 206
/90/90
60/60/60
90/90/90*
*ACR15%
FAR2357
57/49
59/51
60/52
60/52
1 x 10mm GYPROCK
Plasterboard CD.
59/51
60/52
61/53
61/53
1 x 16mm GYPROCK
56/50
58/52
59/53
59/53
58/49
60/51
61/52
61/52
200
252
302
352
(a) Nil
44/38
45/39
46/40
47/41
52/44
53/45
54/46
55/47
54/46
54/46
55/47
56/48
51/45
52/46
53/47
54/48
53/44
54/45
55/46
56/47
180
232
282
332
WALL THICKNESS mm
CSR 255
/90/90
60/60/60
90/90/90*
*ACR15%
FAR2357
BOTH SIDES
1 x 16mm GYPROCK
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
B18
300
(c) 2 x 75 GW Partition 11kg
BOTH SIDES
*ACR15%
250
SIDE TWO
CSR 218
/90/90
60/60/60
90/90/90*
200
Rw / Rw+Ctr
2 x 13mm GYPROCK
/90/90
30/30/30
148
CAVITY INFILL
The Red Book

ACOUSTIC
OPINION
PKA-052

20mm minimum gap.
TEST
ATF 1740
Discontinuous
Construction
NOTES:
stud row only.
CSR 216 requires batts in each stud row.
FRL
Report/Opinion
SYSTEM
N
CAVITY WIDTH mm
WALL LININGS
BOTH SIDES
2 x 13mm GYPROCK
*ACR10%
FAR2357
FAR2357
50/44
51/45
52/46
53/47
58/50
59/51
60/52
61/53
60/52
60/52
61/53
62/54
57/51
58/52
59/53
60/54
1.6
59/50
60/51
61/52
62/53
(e) 60
Soundscreen
200
252
302
352
50/44
52/46
53/47
53/47
BOTH SIDES
58/50
60/52
61/53
61/53
1 x 6mm CeminSeal
60/52
61/53
62/54
62/54
1 x 16mm GYPROCK
57/51
59/53
60/54
60/54
59/50
61/52
62/53
62/53
192
244
294
344
(a) Nil
50/44
51/45
52/46
53/47
58/50
59/51
60/52
61/53
60/52
60/52
61/53
62/54
57/51
58/52
59/53
60/54
59/50
60/51
61/52
62/53
212
264
314
364
WALL THICKNESS mm
CSR 280
/180/180
120/120/120
BOTH SIDES
2 x 16mm GYPROCK
FAR2357
WALL THICKNESS mm
FRL
Report/Opinion
SYSTEM
N
CSR 216
/60/60
30/30/30
60/60/60*
CAVITY WIDTH mm
WALL LININGS
CAVITY INFILL
SIDE ONE
1 x 13mm GYPROCK
(*ACR15%)
SIDE TWO
FAR 2357
1 x 16mm GYPROCK
The Red Book
300
(a) Nil
WALL THICKNESS mm
*ACR15%
250
(a) Nil
CSR 212
/120/120
60/60/60
90/90/90*
200
Rw / Rw+Ctr
CSR 275
/120/120
90/90/90
120/120/120*
148
CAVITY INFILL
2x64 studs + 44 gap = 172

Rw / Rw+Ctr
(a) 165 GW Partition 11kg

+
55/50
WALL THICKNESS mm
201
B19
Steel Frame Internal Wall Systems StrataWall Single Cavity

ACOUSTIC
OPINION
or
TEST
Test
ATF 1912
Lining material as per system table laminated to Shaft

Liner Panel.
Test
ATF 19322
2 x 25mm GYPROCK Shaft Liner Panel in H-Studs at

600mm maximum centres.
Minimum 12mm gap.
Opinion
RP 02267S
Steel studs at 600mm maximum centres.

Cavity insulation as per system table.
Discontinuous
Construction
Lining material as per system table, fixed to studs.
FRL
Report/Opinion
SYSTEM
N
CSR 222
/120/120
WFRA
21241
WALL LININGS
WFRA
21241
(a) Nil
52/44
53/45
56/48
59/51
56/48
153
177
54/46
WALL THICKNESS mm
(a) Nil
53/45
1 x 13mm GYPROCK
plasterboard CD.
58/50
59/51
58/50
153
177
(a) Nil
53/45
53/45
SHAFT LINER PANEL SIDE

1 x 13mm GYPROCK
plasterboard CD.
WFRA
21241
(d) TSB5 Polyester batts
1 x 13mm GYPROCK
SOUNDCHEK.
/120/90

WALL THICKNESS mm
58/50
STUD SIDE
58/50
1 x 6mm CeminSeal
Wallboard.
58/50
146
170
WALL THICKNESS mm
CSR 226
/120/90
WFRA
21241
B20
Rw / Rw+Ctr
1 x 13mm GYPROCK
plasterboard CD.
STUD SIDE
CSR 225
100
1 x 13mm GYPROCK
plasterboard CD.
/120/120
76
STUD SIDE
CSR 223
GAP + STUD DEPTH mm
(a) Nil
54/46
55/47
1 x 13mm GYPROCK
plasterboard CD.
59/51
STUD SIDE
1 x 9mm CeminSeal
Wallboard.

WALL THICKNESS mm
60/52
59/51
149
173
The Red Book
Steel Frame Internal Wall Systems StrataWall Services Cavity

TYPICAL LAYOUT (CSR 230 shown)
Lining material as per system table fixed to furring

channels.
ACOUSTIC
OPINION
or
TEST
Opinion
RP 02267S
Discontinuous
Construction
Furring channel fixed to all H-studs with Rondo Beta Fix

Clips at 600mm max.vertical centres, in 50mm cavity.
20mm gap.
Lining material as per system table, fixed to studs.
FRL
Report/Opinion
SYSTEM
N
CSR 230
/120/120
WFRA
21241
WFRA
21241
WFRA
21241
Rw / Rw+Ctr
60/50
60/50
1 x 13mm GYPROCK
plasterboard CD.
(b) 100 GW Partition 14kg 50 GW Partition 11kg
61/51
61/51
(c) TSB5 Polyester batts
60/50
60/50
211
239
TSB2 Polyester batts
MINIMUM WALL THICKNESS mm
STUD SIDE
62/53
62/53
1 x 13mm GYPROCK
SOUNDCHEK.
62/53
62/53
(c) TSB5 Polyester batts
61/52
62/53
211
239
60/50
60/50
61/51
61/51
(c) TSB5 Tontine Polyester TSB2 Tontine Polyester 60/50
60/50
1 x 13mm GYPROCK
SOUNDCHEK.
STUD SIDE
1 x 13mm GYPROCK
AQUACHEK.
TSB2 Polyester batts

FURRING CHANNEL SIDE

1 x 13mm GYPROCK
AQUACHEK.
The Red Book
92
CSR 235
64
1 x 13mm GYPROCK
plasterboard CD.
/120/120

STUD CAVITY
FURRING CAVITY
STUD SIDE
CSR 231
/120/120
STUD DEPTH mm
WALL LININGS
211
239
B21
Steel Frame Internal Wall Systems StrataWall Double Cavity

ACOUSTIC
OPINION
or
TEST
Lining material as per system table fixed to studs - Side 1.
Opinion
RP 02267S

Discontinuous
Construction
20mm gap.
20mm gap.
Steel studs at 600mm maximum centres
Lining material as per system table fixed to studs - Side 2.
FRL
Report/Opinion
SYSTEM
N
CSR 240
/120/120
SIDE 1 AND 2
64
76
Rw / Rw+Ctr
(a) Nil
58/47
58/47
(b) 75 GW Partition 11kg - both sides
62/53
62/53
63/54
62/53
62/53
245
269
(a) Nil
59/48
60/49
SIDE 1 AND 2
64/55
65/56
1 x 13mm GYPROCK
SOUNDCHEK.
(d) TSB5 Polyester - both sides
63/54
63/54
245
269
1 x 13mm GYPROCK
plasterboard CD.
WFRA
21241
STUD DEPTH mm
WALL LININGS
(c) 100 GW Partition 14kg - both sides

CSR 241
/120/120
WFRA
21241
CSR 243
/120/120
SIDE 1 AND 2
1 x 13mm GYPROCK
AQUACHEK.
WFRA
21241
(a) Nil
58/47
58/47
62/53
63/54
63/54
62/53
63/54
245
269
62/53
62/53
63/54
237
261

CSR 244
/60/60
SIDE 1 AND 2
SF 45743
1 x 9mm CeminSeal
Wallboard.
B22
The Red Book
Steel Frame Internal Wall Systems Party Wall 25mm Fire Barrier
ACOUSTIC
OPINION
PKA-052

Discontinuous
Construction

20-40mm separation between frame and GYPROCK
SHAFT LINER PANEL.
25mm GYPROCK SHAFT LINER PANEL between steel HStuds at 600mm maximum centres.
SHAFT LINER PANEL.
FRL
Report/Opinion
SYSTEM
N
STUD DEPTH mm
WALL LININGS
CAVITY INFILL (Both Sides)

64
76
Rw / Rw+Ctr
CSR 100
60/48
61/49
60/60/60
BOTH SIDES
62/50
62/50
EWFA 45743
2 x 10mm GYPROCK
Plasterboard CD.
(c) 88 RW Soundscreen R2.5
61/49
62/50
257
289
CSR 101
62/50
62/51
60/60/60
BOTH SIDES
63/52
63/52
EWFA 45743
2 x 13mm GYPROCK
Plasterboard CD.
63/51
63/52
269
301
CSR 102
60/48
61/49
60/60/60
BOTH SIDES
62/50
62/50
EWFA 45743
1 x 13mm GYPROCK
SOUNDCHEK.
61/49
62/50
243
275
CSR 103
60/60/60
EWFA 45743
BOTH SIDES
61/49
61/50
1 x 6mm CeminSeal
Wallboard.
62/50
62/51
63/51
63/52
249
281
1 x 10mm GYPROCK
AQUACHEK.
The Red Book
B23
Steel Frame Internal Wall Systems Party Wall 41mm Fire Barrier
ACOUSTIC
OPINION
PKA-052
Discontinuous
Construction

SHAFT LINER PANEL.
25mm GYPROCK SHAFT LINER PANEL between steel Hstuds at 600mm maximum centres.
16mm GYPROCK FYRCHEK screw laminated to SHAFT
LINER
FYRCHEK.
FRL
Report/Opinion
SYSTEM
N
STUD DEPTH mm
WALL LININGS
64
CAVITY INFILL (Both Sides)
76
92
Rw / Rw+Ctr
CSR 111
61/48
61/48
62/50
90/90/90
BOTH SIDES
63/50
63/50
64/52
EWFA 45743
1 x 13mm GYPROCK
Plasterboard CD.
62/48
62/48
63/50
235
259
291
61/48
61/48
62/50
63/50
63/50
64/52
64/51
64/51
65/53
228
252
284
CSR 113
SIDE ONE
1 x 6mm CeminSeal
Wallboard.
90/90/90
SIDE TWO
EWFA 45743
1 x 13mm GYPROCK
Plasterboard CD.
CSR 114
61/48
61/49
62/50
90/90/90
BOTH SIDES
63/50
63/51
64/52
EWFA 45743
1 x 6mm CeminSeal
Wallboard.
62/48
62/49
63/50
221
245
277
CSR 115
62/50
62/50
63/51
90/90/90
BOTH SIDES
63/51
63/51
64/52
EWFA 45743
1 x 13mm GYPROCK
AQUACHEK.
63/50
63/50
64/51
235
259
291
B24
The Red Book
Steel Frame Internal Wall Systems SecurityWall

ACOUSTIC
OPINION
PKA-054
Discontinuous
Construction

Gyprock SecurityWall Panel 27.
Cavity determined by track width.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CSR 290
BOTH SIDES
1 x 13mm GYPROCK
Plasterboard CD.
//
TRACK WIDTH mm
51

(a) Nil
46/37
47/39
53/44
54/46
54/45
55/47
53/44
54/46
131
144
(a) Nil
47/39
48/40
54/46
55/47
55/47
56/48
54/46
55/47
131
144
WALL THICKNESS mm
CSR 291
BOTH SIDES
/60/60
1 x 13mm GYPROCK
FAR2039
WALL THICKNESS mm
CSR 292
BOTH SIDES
1 x 16mm GYPROCK
/90/90
FAR2039
1 x 10mm GYPROCK
plasterboard CD.
(a) Nil
51/43
53/45
58/50
60/52
59/51
61/53
58/50
60/52
157
170
WALL THICKNESS mm
64
Rw / Rw+Ctr
ACOUSTIC
OPINION
PKA-054
Discontinuous
Construction

Cavity width as per system table.
Steel Studs at 600mm maximum centres with minimum
20mm gap to Security Wall Panel.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CAVITY WIDTH mm
84
96
Rw / Rw+Ctr
CSR 293
/90/90
FAR2039
The Red Book
BOTH SIDES
(a) Nil
50/42
51/43
1 x 16mm GYPROCK
57/49
58/50
(c) TSB4/ASB4 Polyester
57/49
58/50
163
175
1 x 10mm GYPROCK
plasterboard CD.
WALL THICKNESS mm
B25

ACOUSTIC
OPINION
PKA-054

Discontinuous
Construction

NOTES:
^ SecurityWall Panel ribs offset to enable insulation to fit.
FRL
Report/Opinion
SYSTEM
N
TRACK WIDTH mm
WALL LININGS
/60/60
BOTH SIDES
FCO 2039
1 x 13mm GYPROCK
BOTH SIDES
/90/90
1 x 16mm GYPROCK
FCO 2039
1 x 10mm GYPROCK
plasterboard CD.
48/40
50/42
51/43
55/47^
57/49
58/50
58/50^
59/51
53/45^
55/47
56/48
154
177
190
(a) Nil
52/45
54/47
55/48
59/52^
61/54
62/55
62/55^
63/56
57/50^
59/52
60/53
180
203
216
(a) Nil
49/41
51/43
52/44
56/48^
58/50
59/51
59/51^
60/52
54/46^
56/48
57/49
160
183
196
WALL THICKNESS mm
CSR 297
/90/90
BOTH SIDES
FCO 2039
1 x 16mm GYPROCK
64
(a) Nil
WALL THICKNESS mm
CSR 295
51
Rw / Rw+Ctr
CSR 294
WALL THICKNESS mm
B26
28
CAVITY INFILL
The Red Book

ACOUSTIC
OPINION
PKA-054
Discontinuous
Construction

Cavity width as per system table.
Steel Studs at 600mm maximum centres with minimum
20mm gap to Security Wall Panel.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CAVITY WIDTH mm
84
96
112
Rw / Rw+Ctr
CSR 296
/90/90
FCO 2039
BOTH SIDES
(a) Nil
52/44
53/46
54/47
1 x 16mm GYPROCK
60/52
61/54
62/55
59/51
60/53
61/54
186
198
214
1 x 10mm GYPROCK
plasterboard CD.
WALL THICKNESS mm
CSR 298
(a) Nil
48/40
49/41
50/42
/90/90
BOTH SIDES
56/48
57/49
58/50
FCO 2039
1 x 16mm GYPROCK
55/47
56/48
57/49
166
178
194
WALL THICKNESS mm
ACOUSTIC
OPINION

Gyprock SecurityWall Panel 27 or
SecurityWall Panel 50.
Gyprock SecurityWall Panel 27 or
SecurityWall Panel 50.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
TRACK/PANEL
27
50
Rw / Rw+Ctr
CSR 284
BOTH SIDES
FRL
//
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
(a) Nil
WALL THICKNESS mm
49
71
55
77
CSR 285
FRL
//
BOTH SIDES
(a) Nil
1 x 13mm GYPROCK
Plasterboard CD.
WALL THICKNESS mm
The Red Book
B27
Steel Frame Internal Wall Systems Resilient Mount

ACOUSTIC
OPINION

PKA-052

Continuous nogging aligned with every Gyprock Resilient
Mount.
NOT
Deemed
Discontinuous
Construction
Gyprock Resilient Mounts screw fixed to one side of

stud
RONDO N308 or N129 Furring Channel clipped to
resilient mounts.
NOTES:
*ACR = Axial Capacity Reduction.
FRL
Report/Opinion
SYSTEM
N
CSR 060
STUD DEPTH mm
WALL LININGS
SIDE ONE (MOUNT SIDE)

2 x 13mm GYPROCK
FAR2357
1 x 13mm GYPROCK
SIDE TWO
CSR 061
BOTH SIDES
2 x 13mm GYPROCK
*ACR10%
CAVITY INFILL
FAR2357
/180/180
and
120/120/120
FAR2357
BOTH SIDES
2 x 16mm GYPROCK
150
45/38
45/38
47/40
48/42
53/44
52/43
54/45
55/47
54/45
54/45
56/47
56/48
52/45
52/45
53/46
54/48
54/44
54/45
55/45
56/47
131
143
159
217
(a) Nil
48/42
49/43
49/43
51/45
56/48
56/48
56/48
58/50
57/49
58/50
58/50
59/51
55/49
56/50
55/49
57/51
57/48
58/49
57/48
59/50
144
156
172
230
(a) Nil
48/42
48/42
49/43
50/44
56/48
55/47
56/48
57/49
57/49
57/49
58/50
58/50
55/49
55/49
55/49
56/50
57/48
57/48
57/48
58/49
156
168
184
242
(e) 60
Soundscreen
1.6
MIN. WALL THICKNESS mm
(e) 60
Soundscreen
1.6
(e) 60
Soundscreen
1.6
B28
92
(a) Nil
CSR 062
76
Rw / Rw+Ctr
/90/90
and
30/30/30
/120/120
90/90/90
120/120/120*
64
The Red Book
Steel Frame Internal Wall Systems Cinema Wall

ACOUSTIC
OPINION
PKA-201001

Steel columns, to engineers design.
NOT
Deemed
Discontinuous
Construction
Girts fixed to columns with GYPROCK CINEMA WALL

MOUNTS.
Top hat sections at 900mm maximum centres to
engineers design.
2 x layers glasswool or polyester insulation. Refer to
insulation specification.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
Rw
CSR 945
120/120/120
FAR2357
(a) 2 x Tontine Acoustisorb-1
77
BOTH SIDES
(b) 2 x 110 Bradford Glasswool Building Blanket
77
3 x 16mm GYPROCK
(c) 2 x Autex AAB32-100
77
CSR 946
SIDE ONE
3 x 16mm GYPROCK
120/120/120
SIDE TWO
FAR2357
4 x 16mm GYPROCK
471
79
79
79
487
CSR 947
120/120/120
FAR2357
81
BOTH SIDES
81
4 x 16mm GYPROCK
81
The Red Book
503
B29
Steel Frame Internal Wall Systems Lined One Side

ACOUSTIC
OPINION
PKA-052

FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CAVITY INFILL
Rw / Rw+Ctr
CSR 085
//
1 x 13mm GYPROCK CD
plasterboard.
(a) Nil
24/22
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
(a) Nil
25/22
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
(a) Nil
31/28
2 x 13mm GYPROCK
(a) Nil
33/30
2 x 16mm GYPROCK
(a) Nil
33/30
CSR 086
//
CSR 089
//
Fire rated from

lined side only
CSR 090
/30/30
and
30/30/30
FAR2357
Fire rated from

lined side only
/60/60
and
60/60/60
CSR 091
FAR2357
B30
The Red Book
Steel Frame Internal Wall Systems Lined One Side

ACOUSTIC
OPINION
PKA-052

FRL
Report/Opinion
Fire rated from
lined side only
SYSTEM
N
STUD DEPTH mm
WALL LININGS
CAVITY INFILL
ALL
Rw / Rw+Ctr
CSR 092
/90/90
and
90/90/90
3 x 13mm GYPROCK
(a) Nil
36/33
3 x 16mm GYPROCK
(a) Nil
36/33
FAR2357
Fire rated from
lined side only
/120/120
and
120/120/120
CSR 093
FAR2357
The Red Book
B31
Steel Frame Internal Wall Systems Shaft Wall

ACOUSTIC
OPINION
PKA-052

64 or 102mm C-H Metal Studs at 600mm maximum
centres.
NOTE:
Acoustic performance valid for studs of 0.5mm BMT
FRL
Report/Opinion
SYSTEM
N
CSR 970
BRANZ
LOP 493
CSR 971
Test SI 1517
B32
38/31
42/35
43/34
47/38
49/40
42/35
46/39
48/38
80
118
(a) Nil
41/34
46/40
46/37
51/43
53/45
SIDE ONE
45/38
50/44
2 x 13mm GYPROCK
52/43
90
128
(a) Nil
41/34
46/40
46/37
51/43
53/45
SIDE ONE
45/38
50/44
2 x 16mm GYPROCK
52/43
96
134
BETWEEN STUDS
1 x 25mm GYPROCK
SHAFT LINER PANEL.
FAR3637
Rw / Rw+Ctr
1 x 16mm GYPROCK
/90/90
CAVITY INFILL
102
(a) Nil
BETWEEN STUDS
SIDE ONE
CSR 977
64
1 x 25mm GYPROCK
SHAFT LINER PANEL.
/60/60
/120/120
STUD DEPTH mm
WALL LININGS
BETWEEN STUDS
1 x 25mm GYPROCK
SHAFT LINER PANEL.
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
WALL THICKNESS mm
WALL THICKNESS mm
The Red Book
Steel Frame Internal Wall Systems Laminated Services

ACOUSTIC
OPINION
PKA-052
Perimeter framing 25/50 x 50 x 0.7 BMT steel angle.

3 x GYPROCK FYRCHEK/SHAFT LINER PANEL
laminated with screws (S), or screws and full cover
adhesive (SA).
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CAVITY INFILL
Rw
CSR 967S
/90/90
WFRA 21898
3 x 13mm GYPROCK
(screw fixing).
(a) Nil
35
3 x 13mm GYPROCK
(screw & adhesive fixing).
(a) Nil
35
3 x 16mm GYPROCK
(screw fixing).
(a) Nil
36
3 x 16mm GYPROCK
(a) Nil
36
(a) Nil
37
CSR 967SA
/90/90
WFRA 21898
CSR 968S
/120/120
WFRA 21898
CSR 968SA
/120/120
WFRA 21898
CSR 969SA
1 x 16mm GYPROCK
/120/120
1 x 25mm GYPROCK
SHAFT LINER PANEL.
WFRA 21898
1 x 16mm GYPROCK
The Red Book
B33

ACOUSTIC
OPINION
PKA-052

Shaft lining as per system table, laminated with screws or
screws and full cover adhesive.
12mm gap.
Wall lining material as per system table.
FRL
Report/Opinion
SYSTEM
N
CSR 136
STUD SIZE mm
WALL LININGS
SHAFT SIDE
WALL SIDE
WFRA 21898
CSR 137
/90/90
/90/90
WFRA 21898
54/45
55/46
55/46
56/47
53/46
53/46
54/47
55/45
55/45
56/46
128
140
156
47/40
48/41
49/42
55/46
56/47
56/47
56/47
57/48
58/49
54/47
55/48
56/49
1.6
56/46
57/47
58/48
128
140
156
(a) Nil
46/39
47/40
49/42
54/45
55/46
56/47
55/46
56/47
58/49
53/46
54/47
56/49
55/45
56/46
58/48
128
140
156
(a) Nil
46/39
47/40
47/40
54/45
55/46
54/45
55/46
56/47
56/47
53/46
54/47
54/47
55/45
56/46
56/46
121
133
149
SHAFT SIDE
SHAFT SIDE
3 x 13mm GYPROCK
WALL SIDE
1 x 6mm CeminSeal
Wallboard.
B34
47/40
54/45
(a) Nil
1 x 13mm GYPROCK
AQUACHEK.
CSR 139
46/39
54/45
3 x 13mm GYPROCK
WALL SIDE
WFRA 21898
46/39
SHAFT SIDE
3 x 13mm GYPROCK
/90/90
(a) Nil
(e) 60
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
CSR 138
92
1 x 13mm GYPROCK
plasterboard CD.
WALL SIDE
WFRA 21898
76
Rw / Rw+Ctr
3 x 13mm GYPROCK
/90/90
64
CAVITY INFILL
Soundscreen
1.6
WALL THICKNESS mm
(e) 60
Soundscreen
WALL THICKNESS mm
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
The Red Book

ACOUSTIC
OPINION
PKA 052

Shaft lining as per system table, laminated with screws or
screws and full cover adhesive.
12mm gap.
Wall lining material as per system table.
FRL
Report/Opinion
SYSTEM
N
CSR 140
STUD SIZE mm
WALL LININGS
SHAFT SIDE
WALL SIDE
WFRA 21898
CSR 141
/120/120
/120/120
WFRA 21898
The Red Book
47/40
55/46
54/45
55/46
56/47
56/47
53/46
54/47
54/47
55/45
56/46
56/46
137
149
165
(a) Nil
47/40
49/42
49/42
55/46
57/48
56/47
56/47
58/49
58/49
54/47
56/49
56/49
1.6
56/46
58/48
58/48
137
149
165
(a) Nil
46/39
47/40
49/42
54/45
55/46
56/47
55/46
56/47
58/49
53/46
54/47
56/49
55/45
56/46
58/48
137
149
165
(a) Nil
46/39
47/40
49/42
54/45
55/46
56/47
55/46
56/47
58/49
53/46
54/47
56/49
1.6
55/45
56/46
58/48
130
142
158
SHAFT SIDE
1 x 13mm GYPROCK
AQUACHEK.
CSR 143
47/40
54/45
3 x 16mm GYPROCK
WALL SIDE
WFRA 21898
46/39
SHAFT SIDE
3 x 16mm GYPROCK
/120/120
(a) Nil
(e) 60
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
CSR 142
92
1 x 13mm GYPROCK
plasterboard CD.
WALL SIDE
WFRA 21898
76
Rw / Rw+Ctr
3 x 16mm GYPROCK
/120/120
64
CAVITY INFILL
SHAFT SIDE
3 x 16mm GYPROCK
WALL SIDE
1 x 6mm CeminSeal
Wallboard.
Soundscreen
1.6
WALL THICKNESS mm
(e) 60
Soundscreen
WALL THICKNESS mm
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
(e) 60
Soundscreen
WALL THICKNESS mm
B35
Steel Frame Internal Wall Systems StrataWall Services

ACOUSTIC
OPINION
or
TEST
RP 02267S
2 x 25mm GYPROCK SHAFT LINER PANEL between

steel H-Studs at 600mm maximum centres.
Lining material as per system table laminated to Shaft
Liner Panel.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CAVITY INFILL
Rw / Rw + Ctr
CSR 248
FACE SIDE
/90/30
(a) Nil
36/33
1 x 13mm GYPROCK
Plasterboard CD.
WFRA 21241
WALL THICKNESS mm
64
CSR 249
/120/90
WFRA 21241
FACE SIDE
(a) Nil
36/33
1 x 13mm GYPROCK
FYRCHEK.
WALL THICKNESS mm
B36
64
The Red Book
Steel Frame External Wall Systems Steel Cladding

TYPICAL LAYOUT (CSR 940 Shown)
ACOUSTIC
OPINION
PKA-055
Structural steel girts to engineers detail. Maximum

spacing as per system table.
GYPROCK FYRCHEK MR plasterboard, as per system
table.
Sarking
Galvanised steel battens (20mm min.) fixed through
plasterboard to steel girts.
External cladding.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
MAXIMUM GIRT
SPACING (mm)
CAVITY INFILL
600
(a) Nil
33
900
(a) Nil
34
1200
(c) Nil
36
Rw
CSR 940
EXTERNAL SIDE
60/60/60
2 x 16mm GYPROCK
FYRCHEK MR
plasterboard
(from outside only)

FAR2357
CSR 941
EXTERNAL SIDE
90/90/90
3 x 13mm GYPROCK
FYRCHEK MR
plasterboard
(from outside only)

FAR2357
CSR 942
120/120/120
(from outside only)
FAR2357
The Red Book
EXTERNAL SIDE
3 x 16mm GYPROCK
FYRCHEK MR
plasterboard
B37
Steel Frame External Wall Systems ExpressWall

ACOUSTIC
OPINION
PKA-055
Cemintel Commercial ExpressWall facade system.

Sarking
Lining material to external side of structural frame, as per
system table.
Structural steel girts to engineers detail. Maximum
spacing as per system table.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
MAXIMUM GIRT
SPACING (mm)
CAVITY INFILL
Rw
CSR 933
EXTERNAL SIDE
//
Nil
(a) Nil
35
600
(a) Nil
38
CSR 934
60/60/60
(from outside only)
FAR2357
B38
EXTERNAL SIDE
2 x 16mm GYPROCK
FYRCHEK MR
plasterboard
The Red Book
Steel Frame External Wall Systems ExpressWall

ACOUSTIC
OPINION
PKA-055
Cemintel Commercial ExpressWall facade system.

Sarking.
Lining material to external side of structural frame, as per
system table.
Lining Material to internal side as per system table.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
STUD DEPTH mm
92
150
Rw / Rw + Ctr
EXTERNAL SIDE
(a) Nil
43/36
Nil
(b) 75 Gold Batts 1.5

(c) 75 Soundscreen 2.0
CSR 932
THERMAL
Rt(WIN)
Rt(SUM)
44/38
1.8
1.5
50/43
51/45
2.5
2.3
51/43
52/45
3.1
2.8
149
207
(a) Nil
43/30
43/32
1.3
1.2
50/37
51/39
2.7
2.4
51/37
52/39
3.2
2.9
168
226
INTERNAL SIDE
//
1 x 13 GYPROCK
Plasterboard CD.
TYPICAL WALL THICKNESS mm
CSR 935
EXTERNAL SIDE
1 x 16mm GYPROCK
FYRCHEK MR
plasterboard
/90/90
60/60/60
INTERNAL SIDE
FAR2357
1 x 16mm GYPROCK
Steel Frame External Wall Systems RendaLine

ACOUSTIC
OPINION
PKA-055
External lining as per system table on 35mm top hats at

600mm max. centres.
Sarking
Structural steel girts to engineers detail.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
GIRT DEPTH mm
150
Rw / Rw + Ctr
CSR 166
EXTERNAL SIDE
//
(a) Nil
The Red Book
27/24
1 x 8mm Cemintel
RendaLine.
193
B39

ACOUSTIC
OPINION
PKA-055
Cemintel RendaLine sheet on timber or steel battens.

Sarking.
Lining material to internal side as per system table.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
STUD DEPTH mm
76
THERMAL
Rw / Rw+Ctr
Rt(WIN)
Rt(SUM)
(a) Nil
38/31
1.7
1.5
INTERNAL WALL SIDE
46/37
3.1
2.8
1 x 10mm GYPROCK
Plasterboard CD.
45/35
2.6
2.4
CSR 165
//
WALL THICKNESS mm
129
ACOUSTIC
OPINION
PKA-055

Sarking.
Lining material to external side as per system table.
FRL
Report/Opinion
SYSTEM
N
CSR 167
WALL LININGS
EXTERNAL SIDE
1 x 13mm GYPROCK
FYRCHEK MR
plasterboard.
60/60/60
(from outside only)
INTERNAL SIDE
FAR2357
STUD DEPTH mm
76
Rw
Rt(WIN)
Rt(SUM)
(a) Nil
40
1.2
1.1
46
2.6
2.4
47
2.7
2.5
1 x 10mm GYPROCK
Plasterboard CD.
CSR 168
60/60/60
FAR2357
EXTERNAL SIDE
1 x 13mm GYPROCK
FYRCHEK MR
plasterboard.
INTERNAL SIDE
1 x 16mm GYPROCK
B40
WALL THICKNESS mm
THERMAL
142
(a) Nil
42
1.2
1.1
48
2.6
2.4
49
2.7
2.5
WALL THICKNESS mm
148
The Red Book

ACOUSTIC
OPINION
PKA-055

25mm Bradford Fibertex Rockwool.
Wire mesh.
Sarking
FRL
Report/Opinion
SYSTEM
N
CSR 170
60/60/60
(from outside only)
FAR2357
WALL LININGS
STUD DEPTH mm
60/60/60
FAR2357
THERMAL
Rw / Rw+Ctr
Rt(WIN)
Rt(SUM)
EXTERNAL SIDE
(a) Nil
40/32
1.8
1.5
As per system
specification
45/36
2.6
2.3
INTERNAL SIDE
45/35
3.1
2.8
1 x 10mm GYPROCK
Plasterboard CD.
CSR 171
76
WALL THICKNESS mm
129
EXTERNAL SIDE
(a) Nil
43/35
1.8
1.6
As per system
specification
47/38
2.6
2.4
INTERNAL SIDE
48/38
3.1
2.9
1 x 16mm GYPROCK
WALL THICKNESS mm
135
ACOUSTIC
OPINION
PKA-055
Cemintel RendaLine sheet fixed to tophats.

25mm Bradford Fibertex 450 Rockwool.
Sarking.
1 x 6mm CeminSeal Wallboard.
FRL
Report/Opinion
SYSTEM
N
CSR 179
90/90/90
FAR2357
STUD DEPTH mm
76
Rw
Rt(WIN)
Rt(SUM)
EXTERNAL SIDE
(a) Nil
45
1.3
1.2
As per system
specification
51
2.7
2.5
INTERNAL WALL SIDE
52
3.2
2.9
WALL LININGS
2 x 13mm GYPROCK
CSR 178
90/90/90
FAR2357
151
EXTERNAL SIDE
As per system
specification
INTERNAL WALL SIDE
1 x 6mm CeminSeal
Wallboard (to stud).
1 x 16mm GYPROCK
The Red Book
WALL THICKNESS mm
THERMAL
(a) Nil
45
1.2
1.2
51
2.6
2.4
52
2.7
2.5
WALL THICKNESS mm
147
B41
Steel Frame External Wall Systems Cladding On Battens

ACOUSTIC
OPINION
External cladding material on timber or steel battens.
PKA-055
Sarking.
NOTES:
FRL
Report/Opinion
SYSTEM
N
CSR 118
WALL LININGS
EXTERNAL SIDE OF STUD
1 x 13mm GYPROCK
FYRCHEK MR
plasterboard.
30/30/30
(from outside only)
FAR2357
INTERNAL SIDE
1 x 10mm GYPROCK
Plasterboard CD.
CSR 121

1 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
60/60/60*
(from outside only)
*ACR 5%
FAR2357
INTERNAL SIDE
1 x 10mm GYPROCK
Plasterboard CD.
CSR 119

2 x 13mm GYPROCK
FYRCHEK MR
plasterboard.
90/90/90
(from outside only)
FAR2357
INTERNAL SIDE
1 x 10mm GYPROCK
Plasterboard CD.
CSR 122

1 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
60/60/60
90/90/90*
*ACR 15%
INTERNAL SIDE
FAR2357
1 x 16mm GYPROCK
CSR 123

2 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
120/120/120
(from outside only)
INTERNAL SIDE
FAR2357
1 x 10mm GYPROCK
Plasterboard CD.
CSR 120
120/120/120
/180/180
FAR2357

2 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
INTERNAL SIDE
2 x 16mm GYPROCK
B42
STUD DEPTH mm
76
THERMAL
Rw
Rt(WIN)
Rt(SUM)
(a) Nil
33 37
1.0
1.0
39 43
2.4
2.2
40 44
2.9
2.7
36 40
1.0
1.0
39 43
2.4
2.2
40 44
3.0
2.7
37 41
1.1
1.0
43 47
2.4
2.2
44 48
2.9
2.7
38 42
1.1
1.0
41 45
2.5
2.3
42 46
3.0
2.8

(a) Nil
(b) 75 Gold
Batts
1.5

(a) Nil
(b) 75 Gold
Batts
1.5

(a) Nil
(b) 75 Gold
Batts
1.5

129
132
142
138
(a) Nil
37 41
1.1
1.1
43 47
2.4
2.2
44 48
3.0
2.7
148
(a) Nil
42 46
1.3
1.2
48 52
2.6
2.4
49 53
3.1
2.8
140
The Red Book
Steel Frame External Wall Systems Texture Base Sheet For Houses
ACOUSTIC
OPINION
PKA-052
1 x 7.5mm Cemintel Texture Base Sheet to exterior face.

Sarking.
Lining material to internal side of steel studs as per system
table.
NOTES:
FRL
Report/Opinion
SYSTEM
N
CSR 127
WALL LININGS
1 x 13mm GYPROCK
FYRCHEK MR
plasterboard.
60/60/60
(from outside only)
INTERNAL SIDE
FAR2357
STUD DEPTH mm

1 x 13mm GYPROCK
FYRCHEK MR
plasterboard.
60/60/60*
*ACR 15%
FAR2357
INTERNAL SIDE
(a) Nil
40/33


1 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
60/60/60
(from outside only)
INTERNAL SIDE
FAR2357
Rt(SUM)
42/35
0.5
0.5
46/37
48/39
1.9
1.8
47/37
49/39
2.4
2.2
107
123
41/34
42/35
0.5
0.5
47/38
48/39
1.9
1.8
48/38
49/39
2.5
2.3
113
129
(a) Nil
41/34
42/35
0.5
0.5
47/38
48/39
1.9
1.8
48/38
49/39
2.4
2.2
110
126
(a) Nil
42/35
44/37
0.6
0.5
48/39
50/41
2.0
1.8
49/39
51/41
2.5
2.3
116
132
WALL THICKNESS mm
(a) Nil
(c) 75
60/60/60
90/90/90*
*ACR 15%
FAR2357

1 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
INTERNAL SIDE
1 x 16mm GYPROCK
The Red Book
Soundscreen
2.0
WALL THICKNESS mm
1 x 10mm GYPROCK CD
plasterboard.
CSR 129
THERMAL
Rt(WIN)
1 x 16mm GYPROCK
CSR 126
92
Rw / Rw + Ctr
1 x 10mm GYPROCK
Plasterboard CD.
CSR 128
76
WALL THICKNESS mm
WALL THICKNESS mm
B43
Steel Frame External Wall Systems Concrete

ACOUSTIC
OPINION
TYPICAL LAYOUT (CSR 937a Shown)
PKA-055
150mm concrete wall min 2400kg/m3.

Rondo furring channel No.129
66mm cavity.
Cavity infill as per system table.
Lining as per system table.
Notes:
Foil side to plasterboard.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
Rw / Rw + Ctr
THERMAL
Rt(WIN)
Rt(SUM)
CSR 937
(a) Nil
60/51
(b) Bradford Masonry Wall Blanket R1.2
65/56
2.5
2.3
INTERNAL SIDE
1 x 13mm GYPROCK
Plasterboard CD.
//
WALL THICKNESS mm
229
Steel Frame External Wall Systems Hebel Powerpanel

ACOUSTIC
OPINION
TYPICAL LAYOUT
2010675.1/
2401A/R1/JH
CSR Hebel Powerpanel AAC (75mm) screw fixed to

battens spaced at 900mm maximum.
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
STUD DEPTH mm
70
90
THERMAL
Rw / Rw+Ctr
(a) Nil
46/40
Rt(WIN)
Rt(SUM)
46/40
0.9
0.9
53/44
53/45
2.8
2.6
177
197
HEBEL 1401
240/180/180
(from outside only)
FSV0356
INTERNAL SIDE
1 x 10mm GYPROCK
Plasterboard CD.
WALL THICKNESS mm
B44
The Red Book
Steel Frame External Wall Systems Masonry

ACOUSTIC
OPINION
PKA-055
Fire rated masonry veneer wall.

Steel studs at 600mm maximum centres with 40mm
minimum gap to masonry.
Notes:
Masonry to be minimum 90mm thick and 170kg/m2
FRL
Report/Opinion
SYSTEM
N
CSR 184
FRL
60/60/60
from outside only
refer to
Masonry
Manufacturer
FAR 2357
and refer to
Masonry
Manufacturer
CSR 186
FAR 2357
and refer to
Masonry
Manufacturer
The Red Book

(c) 88
Soundscreen
2.5
92
THERMAL
Rw / Rw+Ctr
Rt(WIN)
Rt(SUM)
52/44
0.5
0.5
59/51
2.1
2.0
59/50
3.2
2.9
252
EXTERNAL WALL SIDE
(a) Nil
55/48
0.6
0.6
Masonry veneer wall with

FRL 60/60/60.
62/55
2.2
2.0
INTERNAL WALL SIDE
62/54
3.2
2.9
258
EXTERNAL WALL SIDE
(a) Nil
55/48
0.6
0.6

FRL 90/90/90.
62/55
2.2
2.0
INTERNAL WALL SIDE
62/54
3.3
3.0
58/51
0.7
0.7
65/58
2.2
2.1
65/57
3.3
3.0
2 x 13mm GYPROCK
CSR 187
FAR 2357
and refer to
Masonry
Manufacturer
(a) Nil
1 x 16mm GYPROCK
FRL
90/90/90

FRL 60/60/60.
1 x 10mm GYPROCK
plasterboard CD.
CSR 185
STUD DEPTH mm
EXTERNAL WALL SIDE
INTERNAL WALL SIDE
FRL
60/60/60
FRL
120/120/120
WALL LININGS
EXTERNAL WALL SIDE

(a) Nil

FRL 90/90/90.
(b) 75 Gold
INTERNAL WALL SIDE
2 x 16mm GYPROCK
Batts
1.5
268
274
B45
Column or Beam Systems
FIG B1: TYPICAL CONSTRUCTION DETAILS

(CSR 195 SHOWN)
Metal Angle fixed to soffit at
600mm maximum centres and
100mm maximum from each end
Steel angle fixed to the soffit or wall junction.

CSR Gyprock Universal Encasement Clips friction fitted
to the remaining column/beam flanges.
Wall Furring Track (Rondo N140/142) is held in the back
tongue of the clip.
6-20mm gap
Noggings at each end of the column/beam and behind

plasterboard butt joints in single layer systems.
Caulk all gaps

with Gyprock Fire
Mastic/FB1

FRL
Report/Opinion
SYSTEM
N
CSR Gyprock
Universal
Encasement Clips
PLASTERBOARD
LINING
Rondo Wall Furring

Track clipped along
flanges of beam
CSR 192
30//
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
CSIRO
FCO 1494
Each layer of
GYPROCK
FYRCHEK
plasterboard fixed at
200mm maximum
centres to all
framing
CSR 193
60//
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
CSIRO
FCO 1494
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
CSIRO
FCO 1494
Apply External
Corner Bead and
set all corners
Rondo Track
fixed to column
at ends and
800mm max.
centres
CSR 195
90//
FIXING TO STEEL HOLLOW SECTION
RHS/SHS
Steel Column
18mm
Each layer of
GYPROCK FYRCHEK
plasterboard fixed at
200mm maximum
centres to all tracks
CSR 196
120//
CSIRO
FCO 1494
3 x 13mm GYPROCK
FYRCHEK
plasterboard.
FIXING TO STEEL UNIVERSAL BEAM

CSR Gyprock Universal
Encasement Clips at
800mm maximum centres
along column flanges and
150mm maximum from
each end of column
Rondo Wall Furring

Track held in back
tongue of CSR
Gyprock Universal
Encasement Clips
Screw fix each

layer at 200mm
maximum centres
to all steel framing
Offset Butt Joints in

consecutive layers by
300mm minimum
Fasten at butt joints
with laminating screws
at 200mm max centres
200mm max.
Apply External Angle

Bead to all corners and
set
B46
The Red Book
EC08 Plasterboard Systems

The growth in recent years of more sustainable development,
the Green Building Council Australia and Green Star ratings
for buildings has fuelled the demand for more environmentally
responsible building materials.
In the plasterboard market, Gyprock has led the way
with reCore technology and the Gyprock EC08 range
of Good Environmental Choice Australia (GECA) certified
plasterboards.
CSR Lightweight Systems manufactures and supplies a
diverse range of plasterboard and fibre cement sheets,
acoustic panels and accessories to suit a multitude of wall,

ceiling and encasement applications.
The Gyprock EC08 range of plasterboard has been
developed using Gyprocks reCore technology which
enables the use of higher levels of recycled content over
20% for EC08 Impact.
All products in the range have been certified by GECA as
meeting the requirements of their environmental standard
for Panel Boards.
EC08 Partition
EC08 Fire
EC08 Impact
An economical, non-fire rated

board for general requirements
where fire and acoustics
are not required.
The original, GECA certified

EC08 board with fire and
acoustic rating for party walls
and meeting rooms.
Fire and acoustic rated with

impact resistance for high traffic
areas such as in education
and health facilities.
The Red Book
B47
Steel Frame Internal Wall Systems Single Stud ECO8

ACOUSTIC
OPINION
TYPICAL LAYOUT (CSR EC105a shown)
PKA-056

NOTES:
Acoustic performance valid for 0.5 BMT.
FRL
Report/Opinion
SYSTEM
N
STUD DEPTH mm
WALL LININGS
BOTH SIDES
1 x 13mm GYPROCK
ECO8 Partition.
SIDE ONE
1 x 6mm CeminSeal
Wallboard.
//
CSR EC110
//
39/30 41/32 42/33 43/34 45/36

CSR EC620
//
B48
90
102
118
176
39/30 41/32 42/33 43/34 45/36
WALL THICKNESS mm
43/34 43/34 44/35 46/37
38/31 40/33 41/34 42/35 44/37
70
42/32 43/33 44/34 46/36

83
95
111
169
(a) Nil
39/32 40/33 42/35 43/36 46/39
44/35 45/36 47/38 48/39 50/41
SIDE TWO

47/38 48/39 49/40 51/42
44/37 44/37 46/39 47/40 49/42
46/36 48/38 49/39 51/41
WALL THICKNESS mm
(a) Nil
42/35 43/36 44/37 46/40 48/42
47/38 48/39 49/40 51/43 52/44

50/41 50/41 52/44 53/45
46/39 47/40 48/41 50/44 51/45
103
49/39 50/40 52/43 53/44

116
128
144
202
(a) Nil
37/27 37/30 38/31 40/33 43/36
40/30 42/33 43/34 45/36 47/38
SIDE TWO
40/32 41/34 42/35 44/37 46/39
1 x 13mm GYPROCK
ECO8 Impact
SIDE ONE
1 x 13mm GYPROCK
Plasterboard CD.
//
77
42/32 43/33 44/34 46/36
34/27 36/29 37/30 38/31 41/34
WALL THICKNESS mm
CSR EC305
2 x 13mm GYPROCK
ECO8 Partition
2 x 13mm GYPROCK
ECO8 Partition
//
43/34 43/34 44/35 46/37
(a) Nil
BOTH SIDES
38/31 40/33 41/34 42/35 44/37
1 x 13mm GYPROCK
ECO8 Partition.
CSR EC115
150
34/27 36/29 37/30 38/31 41/34
1 x 13mm GYPROCK
ECO8 Partition
92
SIDE TWO
SIDE ONE
76
(a) Nil
WALL THICKNESS mm
CSR EC605
64
Rw / Rw+Ctr
CSR EC105
//
51
CAVITY INFILL
WALL THICKNESS mm
77
44/35 44/35 46/37 48/39

43/33 44/34 46/36 48/38
90
102
118
176
(a) Nil
36/29 38/31 38/31 40/33 43/36
41/32 43/34 43/34 45/36 47/38
SIDE TWO
40/33 42/35 42/35 44/37 46/39
1 x 13mm GYPROCK
ECO8 Impact
SIDE ONE
1 x 6mm CeminSeal
Wallboard.
WALL THICKNESS mm
70
46/37 45/36 47/38 49/40

44/34 44/34 46/36 48/38
83
95
111
169
The Red Book
Steel Frame Internal Wall Systems Single Stud ECO8

ACOUSTIC
OPINION
PKA-056

NOTES:
Acoustic performance valid for 0.5 BMT.
FRL
Report/Opinion
SYSTEM
N
STUD DEPTH mm
WALL LININGS
BOTH SIDES
1 x 13mm GYPROCK
ECO8 Impact.
FAR 2357
&
EWFA 24040
- /60/60
BOTH SIDES
1 x 13mm GYPROCK
ECO8 Fire.
FAR 2357
&
BWA 23035
CSR EC615
- /60/60
FAR 2357
&
BWA 23035
1 x 13mm GYPROCK
ECO8 Fire.
CSR EC210
43/34 44/35 45/36 46/37 48/40

- /90/90
FAR 2357
&
BWA 23035
- /120/120

FAR 2357
&
BWA 23035
2 x 13mm GYPROCK
ECO8 Fire.
WALL THICKNESS mm
176
45/36 44/35 46/37 48/40
41/34 42/35 42/35 44/37 46/40
77
44/34 44/34 46/36 48/39

90
102
118
176
48/39 48/39 49/40 51/43
44/37 45/38 46/39 47/40 49/43
83
47/37 48/38 49/39 51/42

96
108
124
182
(a) Nil
40/33 42/35 43/36 44/37 47/41
45/36 47/38 48/39 49/40 51/43
WALL THICKNESS mm
50/41 50/41 51/42 53/45
44/37 46/39 47/40 48/41 50/44
90
48/38 49/39 50/40 52/43

103
115
131
189
(a) Nil
45/38 47/41 48/42 48/42 50/44
50/41 52/44 53/45 53/45 54/46

54/46 54/46 54/46 55/47
49/42 51/45 52/46 52/46 53/47
103
53/44 54/45 54/45 55/46

116
128
144
202
(a) Nil
44/37 45/38 46/40 47/41 49/43
49/40 50/41 51/43 52/44 53/45

WALL THICKNESS mm
The Red Book
118
45/36 46/37 47/38 48/39 50/42
BOTH SIDES
102
WALL THICKNESS mm
- /120/120
90
40/33 41/34 42/35 43/36 46/40
CSR EC215
77
45/35 46/36 47/37 49/40
(a) Nil
SIDE TWO
2 x 13mm GYPROCK
ECO8 Impact.
FAR 2357
&
EWFA 24040
42/33 44/35 44/35 46/37 48/40
2 x 13mm GYPROCK
ECO8 Fire.
BOTH SIDES
42/35 43/36 44/37 45/38 47/41
36/29 38/31 38/31 40/33 43/37
CSR EC315
46/37 46/37 47/38 49/41
SIDE TWO
1 x 13mm GYPROCK
ECO8 Fire.
(a) Nil
1 x 6mm CeminSeal
Wallboard.
SIDE ONE
150
1 x 13mm GYPROCK
ECO8 Fire.
92
38/31 39/32 40/33 41/34 44/38
WALL THICKNESS mm
SIDE ONE
76
(a) Nil
WALL THICKNESS mm
CSR EC205
64
Rw / Rw+Ctr
CSR EC310
- /60/60
51
CAVITY INFILL
52/43 52/44 53/45 54/46
48/41 49/42 50/44 51/45 52/46
103
51/41 52/43 53/44 54/45

116
128
144
202
B49
Steel Frame Internal Wall Systems Staggered Stud ECO8

ACOUSTIC
OPINION
PKA-056

Staggered Steel Studs at 600mm max. centres each side.
64mm Rondo lipped steel stud, located in 92mm track
top and bottom, using the Gyprock Staggered Stud Clip.
FRL
Report/Opinion
SYSTEM
N
CAVITY WIDTH mm
WALL LININGS
FAR 2357
&
BWA 23035
39/32
41/34
44/38
47/38
49/40
51/43
BOTH SIDES
48/39
50/41
52/44
1 x 13mm GYPROCK
ECO8 Fire
46/39
48/41
50/44
48/38
50/40
52/43
102
118
176
(a) Nil
41/34
42/35
45/39
49/40
50/41
52/44
BOTH SIDES
50/41
51/42
53/45
1 x 13mm GYPROCK
ECO8 Impact
48/41
49/42
51/45
1.6
50/40
51/41
53/44
102
118
176
CSR EC320
FAR 2357
&
EWFA 24040
(e) 60
Soundscreen
WALL THICKNESS mm
B50
150
(a) Nil
WALL THICKNESS mm
- /60/60
92
Rw / Rw+Ctr
CSR EC220
- /60/60
76
CAVITY INFILL
The Red Book
Steel Frame Internal Wall Systems Double Stud ECO8

ACOUSTIC
OPINION
PKA-056

Discontinuous
Construction

20mm minimum gap.
NOTES:
Unless otherwise specified, cavity infill is required in one
stud row only.
FRL
Report/Opinion
SYSTEM
N
CAVITY WIDTH mm
WALL LININGS
BOTH SIDES
2 x 13mm GYPROCK
ECO8 Impact.
FAR 2357
&
EWFA 24040
CAVITY INFILL
CSR EC225
BOTH SIDES
FAR 2357
&
BWA 23035
2 x 13mm GYPROCK
ECO8 Fire.
250
300
Rw / Rw+Ctr
(a) Nil
51/45
53/47
54/48
54/48
59/51
61/53
62/54
62/54
61/53
62/54
63/55
63/55
58/52
60/54
61/55
61/55
60/51
62/53
63/54
63/54
200
252
302
352
(a) Nil
50/44
51/45
52/46
53/47
58/50
59/51
60/52
61/53
60/52
60/52
61/53
62/54
57/51
58/52
59/53
60/54
59/50
60/51
61/52
62/53
200
252
302
352
(e) 60
Soundscreen
1.6
WALL THICKNESS mm
/120/120
200
CSR EC325
/120/120
148
WALL THICKNESS mm
Steel Frame Internal Wall Systems SecurityWall ECO8

ACOUSTIC
OPINION
PKA-054
Discontinuous
Construction

NOTES:
^ SecurityWall Panel ribs offset to enable insulation to fit.
FRL
Report/Opinion
SYSTEM
N
TRACK WIDTH mm
WALL LININGS
FAR 2039
&
BWA 23035
BOTH SIDES
1 x 13mm GYPROCK
ECO8 Fire.
64
(a) Nil
48/40
50/42
51/43
55/47^
57/49
58/50
58/50^
59/51
53/45^
55/47
56/48
WALL THICKNESS mm
The Red Book
51
Rw / Rw+Ctr
CSR EC230
- /60/60
28
CAVITY INFILL
154
177
190
B51
Steel Frame Internal Wall Systems Laminated Services ECO8

SYSTEM SPECIFICATION EC08 Systems
ACOUSTIC
OPINION
TYPICAL LAYOUT (CSR EC031 shown)
PKA-056
Perimeter Framing 25/50 x 50 x 0.8 BMT steel angle.

3 x Gyprock EC08 Fire laminated with screws(S) or
screws and full cover adhesive (SA)
FRL
Report/Opinion
SYSTEM
N
WALL LININGS
CAVITY INFILL
Rw
(a) Nil
35
CSR EC031
- /90/90
FC0 1786
&
BWA 23035
B52
LINING
3 x 13mm GYPROCK
ECO8 Fire.
The Red Book
FIG B2: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS

HORIZONTAL SHEETING ADHESIVE/FASTENER FIXING
For additional information, refer to GYP544, Gyprock Steel Frame Wall Systems Installation Guide.
NON-FIRE RATED
Fixing Specifications
For Level 4 finish, form butt

joints between framing
Screw
along sheet
centreline
at every
second
stud
200mm
min.
One layer of Gyprock

plasterboard to each side
of wall
Daubs of CSR Gyprock

Acrylic Stud Adhesive
300mm
max.
Screws
Adhesive
Refer to Section A
Location
Fixing & Spacing
Field
Sheet
Width
900mm
1200mm
1350mm
Adhesive Daubs at
300mm max. centres
and 200mm min.
from fastener points
3 daubs
4 daubs
5 daubs
Screw at every
second stud along
sheet centreline
Recessed
Edges
Screw at each stud
Butt joints
Screws at 200mm
centres
Corners &
Openings
Screws at 300mm
max. centres
SUITABLE FOR:
200mm
max.
300mm
max.
300mm
max.
CSR Bradford Acoustic

Insulation if required
200mm
min.
Refer to perimeter details
Noggings may not be permitted

in staggered stud systems
FIG B3: FASTENER FIXING SINGLE LAYER HORIZONTAL SHEETING NON-TILED AREAS
NON-FIRE RATED
For Level 4 finish, form butt
joints between framing
400mm
max.
300mm
max.

of wall
Screws
Refer to Section A
Location
Fixing & Spacing
Field
Screws at 400mm
max. centres
Sheet
Width
900mm
1200mm
1350mm
4 Screws
4 Screws
5 Screws
Recessed
Edges
Screw at each stud
Butt joints
Screws at 200mm
max. centres
Corners &
Openings
Screws at 300mm
max. centres
SUITABLE FOR:
200mm
max.

Refer to perimeter
details

The Red Book
B53

VERTICAL SHEETING ADHESIVE/FASTENER FIXING
NON-FIRE RATED
Screws
Adhesive
Refer to Section A
Location
Fixing & Spacing
Field
Adhesive Daubs at
300mm max. centres
and 200mm min.
Screw at top and
bottom and 1200mm
max. cts
Recessed
Edges
Screw at top and

bottom and 400mm
max. cts
Corners &
Openings
Screws at
300mm max. centres
300mm
max.
400mm
max.
300mm
max.
200mm
min.

Screw at
1200mm
max.
vertical
centres


of wall
SUITABLE FOR:
300mm
max.
200mm
min.

VERTICAL SHEETING ADHESIVE/FASTENER FIXING
NON-FIRE RATED
200mm
max.
Two layers of Gyprock

of wall
300mm
max.
400mm
max.

400mm
max.
200mm
min.
Screw at
1200mm
max.
vertical
centres
Screws
Adhesive
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges &
Field
Screws at top and

bottom and at
400mm max. centres
2nd Layer
Fixing & Spacing
Field
Adhesive Daubs at
300mm max. centres
and 200mm min.
from fastener points.
Screw at top and
bottom and 1200mm
max.cts
Recessed
Edges
Screw at top and

bottom and 400mm
max. cts
Corners &
Openings
Screws at 300mm
max. centres
SUITABLE FOR:
300mm
max.
400mm
max.

B54
The Red Book
FIG B6: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS CEMINSEAL WALLBOARD NON-TILED AREAS
HORIZONTAL SHEETING ADHESIVE/FASTENER FIXING
For additional information, refer to FC101, Cemintel Wet Area Systems.

Temporary fastener through
block at every second stud
until adhesive sets
One layer of CeminSeal

wallboard to each side of
wall
200mm
max.
NON-FIRE RATED
Screws
Adhesive
Refer to Section A
Location
Fixing & Spacing
Field
Sheet
Width
900mm
1200mm
1350mm
Adhesive Daubs at
230mm max. centres
and 200mm min.
3 daubs
4 daubs
5 daubs
Screw through
temporary block
at every second
stud along sheet
centreline
Recessed
Edges
Screw at each stud
Butt joints
Screws at 200mm
centres
Corners &
Openings
Screws at 200mm
max. centres
Daubs of GYPROCK
200mm
max.
230mm
max.
SUITABLE FOR:
230mm
max.

200mm
min.
Fasteners at 12mm min. from

sheet edges and 50mm min.
from sheet corners

FIG B7: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS CEMINSEAL WALLBOARD NON-TILED AREAS
HORIZONTAL SHEETING FASTENER FIXING
For additional information, refer to FC101, Cemintel Wet Area Systems.

NON-FIRE RATED
One layer of CeminSeal

wallboard to each side of
wall
200mm
max.
300mm
max.
Screws
Refer to Section A
Location
Fixing & Spacing
Field
Screws at 300mm
max. centres
Sheet
Width
900mm
1200mm
1350mm
4 Screws
5 Screws
6 Screws
Recessed
Edges
Screw at each stud
Butt joints
Screws at 200mm
max. centres
Corners &
Openings
Screws at 300mm
max. centres
SUITABLE FOR:
200mm
max.


from sheet corners
The Red Book
B55
FIG B8: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS SINGLE LAYER VERTICAL SHEETING
FIRE RATED
200mm max.
Noggings behind but joints

staggered 600mm min.
Screws

300mm
max.
600mm
min.
Refer to Section A
Location
Fixing & Spacing
Field
Screws at 300mm
max. centres
Recessed
Edges
Screws at
300mm max. centres
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
SUITABLE FOR:
300mm
max.
300mm
max.
One layer of GYPROCK

to each side of wall in
accordance with system
specifications

Refer to perimeter
details
FIG B9: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS SINGLE LAYER HORIZONTAL SHEETING
FIRE RATED
Screws
300mm
max.
300mm
max.
Recessed joints to be
offset a minimum 300mm
in opposing sides when not
backed by nogging

FYRCHEK plasterboard to
each side of wall
Refer to Section A
Location
Fixing & Spacing
Field
Screws at 300mm
max. centres
Recessed
Edges
Screw at
each stud
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
SUITABLE FOR:
200mm
max.
200mm
max.

Refer to perimeter
details
B56

The Red Book
FIG B10: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS TWO LAYER VERTICAL SHEETING
FIRE RATED
300mm
max.
600mm
max.
200mm max.
laminating screws
Two layers of GYPROCK

specifications
Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges
& Field
Screws at 600mm
max. centres
2nd Layer
Fixing & Spacing
Field
Screws at 300mm
max. centres
Recessed
Edges
Screws at
300mm max. centres
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
SUITABLE FOR:
200mm
max.
300mm
max.
300mm
max.
Noggings behind but joints

staggered 600mm min.
Refer to perimeter
details
FIG B11: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS TWO LAYER VERTICAL+HORIZONTAL SHEETING
FIRE RATED
200mm
max.

300mm
max.
300mm
max.
600mm
max.
600mm
max.
The Red Book
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges
& Field
Screws at 600mm
max. centres
2nd Layer
Fixing & Spacing
Field
Screws at 300mm
max. centres
Recessed
Edges
Screw at
each stud
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
SUITABLE FOR:

specifications
Refer to perimeter
details
Screws
Where butt
joints are
formed off
studs, laminate
to first layer
with laminating
screws at
200mm max.

B57
FIG B12: INSTALLATION DETAIL FOR INTERNAL WALL SYSTEMS TWO LAYER HORIZONTAL SHEETING
Stagger fasteners
at butt joints
FIRE RATED
Stagger horizontal joints

300mm minimum between
1st and 2nd layer
200mm
max.
300mm
max.
300mm min.

Studs at 600mm maximum

centres
300mm
max.
600mm
max.
specifications
Stagger butt joints in

adjacent sheets and
between 1st and 2nd
layers by one stud
minimum
Refer to perimeter
details
B58
Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges &
Field
Screws at 600mm
max. centres
2nd Layer
Fixing & Spacing
Field
Screws at 300mm
max. centres
Recessed
Edges
Screw at
each stud
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
SUITABLE FOR:
Where butt
joints are
formed off
studs,
laminate to
first layer
with
laminating
screws at
200mm
max.
The Red Book

THREE LAYER VERTICAL OR HORIZONTAL SHEETING
FIRE RATED
Fixing Specifications for
Vertical Sheeting (shown)
600mm
Offset all joints 300mm

min. from previous
layer
300mm
600mm
300mm
Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges,
Field,
Corners &
Openings
Screws at 600mm
max. centres on
studs
2nd Layer
Fixing & Spacing
Recessed
Edges
Field
Screws at 300mm
max. centres on
studs
Butt Joints
Laminating Screws at
200mm max. centres
Corners &
Openings
Screws at 300mm
max. centres
3rd Layer
Fixing & Spacing
Recessed
Edges,
Field, Butt
Joints
Corners &
Openings
Laminating screws
at 400x400mm max.
grid
FIRE RATED
400mm
400mm
Refer to perimeter
details
400mm

Horizontal Sheeting
Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges,
Field,
Butt Joints,
Corners &
Openings
Screws at 600mm
max. centres on
studs
2nd Layer
Fixing & Spacing
Recessed
Edges
Screws at 600mm
max. centres on
studs
Field
Screws at 300mm
max. centres on
studs
Corners &
Openings
Screws at 300mm
max. centres
Butt Joints
Screws at 200mm
max. centres on
studs
3rd Layer
Fixing & Spacing
Recessed
Edges,
Field, Butt
Joints
Corners &
Openings
Laminating screws
at 400x400mm max.
grid
SUITABLE FOR:
The Red Book
B59
FIG B14: INSTALLATION DETAIL FOR STEEL FRAME EXTERNAL WALL SYSTEM
TWO OR THREE LAYER VERTICAL SHEETING
200mm
400mm
200mm
Refer to
system table
for girt spacing
200mm
Offset all joints by

300mm minimum
200mm
400mm
200mm
FIRE RATED
Screws
B60
SUITABLE FOR:
Refer to Section A
1st Layer
Fixing & Spacing
Field &
Butt Joints
Screws at 200mm
max. centres to all
girts
2nd & 3rd

Layers
Fixing & Spacing
Recessed
Edges &
Butt Joints
200mm max. centres
Field
400 x 400mm max.
grid
The Red Book

ONE, TWO OR THREE LAYER VERTICAL OR HORIZONTAL SHEETING
For additional information, refer to GYP546, Gyprock Shaft Systems.

FIRE RATED
Set Joints in at
least one layer
Lost
studs

35 x 35 x 0.8mm
angle screw fixed at
400mm centres to
each stud
First layer
600mm
Nogging as required
600mm
Fix first side as for

second side
300mm
Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges,
Field,
Corners &
Openings
Screws at 600mm
max. centres on
studs
2nd Layer
Fixing & Spacing
Recessed
Edges
Field
Screws at 300mm
max. centres on
studs
Butt Joints
200mm max. centres
Corners &
Openings
Screws at 300mm
max. centres
3rd Layer
Fixing & Spacing
Recessed
Edges,
Field, Butt
Joints
Corners &
Openings
Laminating screws
at 400x400mm max.
grid
300mm
FIRE RATED
Horizontal Sheeting
400mm
Refer to
perimeter
details
400mm
400mm
Offset all joints

300mm min. from
previous layer
SUITABLE FOR:
Set outer
layer joints
from
accessible
side
Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges,
Field,
Butt Joints,
Corners &
Openings
Screws at 600mm
max. centres on
studs
2nd Layer
Fixing & Spacing
Recessed
Edges
Screws at 600mm
max. centres on
studs
Field
Screws at 300mm
max. centres on
studs
Corners &
Openings
Screws at 300mm
max. centres
Butt Joints
Screws at 200mm
max. centres on
studs
3rd Layer
Fixing & Spacing
Recessed
Edges,
Field, Butt
Joints
Corners &
Openings
Laminating screws
at 400x400mm max.
grid
NOTE: Fix single layer systems as

shown for 2nd layer
Alternative stud
type for in-line
stud framing
The Red Book
B61
FIG B16: INSTALLATION DETAIL FOR SHAFTWALL SYSTEMS

Staggered Joints
FIRE RATED
J Track
C-H Studs
300mm
max.
25mm GYPROCK
Shaft Liner Panels
600mm
max.
300mm
max.
Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges, &
Field
Screws at 600mm
max. centres on
studs
2nd Layer
Fixing & Spacing
Field
Screws at 300mm
max. centres
Recessed
Edges
Screws at
300mm max. centres
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
IMPORTANT
300mm
max.
1st layer of
GYPROCK FYRCHECK
plasterboard
Walls enclosing lift shafts MUST

have both layers of GYPROCK
FYRCHEK separately fastened to the
top and bottom J tracks with screws
at 300mm maximum spacings.
600mm
max.
2nd layer of GYPROCK

FYRCHECK plasterboard
J Track
FIG B17: INSTALLATION DETAIL FOR LAMINATED SERVICE SYSTEMS

CSR Gyprock Fire Mastic at
head of 2nd layer
FIRE RATED
75mm
IBS Backing
Rod at head
of 1st layer
Steel Angle
internal
framing
400mm
max.
Fix 1st layer to vertical

steel angles only
NOTE: * Adhesive required for
systems CSR967-SA, CSR968-SA
and CSR969-SA only.
75mm
600mm max.
400mm
max.
Apply adhesive*
and screw fix
2nd layer to
vertical steel
angles with
25/45mm
Gyprock screws.
Fix body with
laminating
screws at
600mm max.
horizontal x
400mm max.
vertical centres
Apply adhesive*
and screw fix
body of 3rd
layer with
laminating
screws only at
600mm max.
horizontal x
400mm max.
vertical centres
CSR Gyprock Fire Mastic

at base of 3rd layer
Steel angle frame installed over
first layer of plasterboard at floor,
soffit and vertical corners
B62
The Red Book
FIG B18: INSTALLATION DETAIL STEEL FRAME SECURITYWALL SYSTEM
For additional information, refer to GYP560, Gyprock SecurityWall Systems.
SecurityWall
Track 27
FIRE RATED
300mm
max.
Gyprock
SecurityWall
Panel 27
1x 13mm
GYPROCK
FYRCHEK
plasterboard

Screws
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges, &
Field
Screws at 600mm
max. vertical centres
x 300mm max.
horizontal centres
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
600mm
max.
Cavity
Insulation
Blanket
Base Track
300mm
max.
Caulk all perimeter gaps

with Gyprock Fire Mastic
FIRE RATED
Security Wall
Track 27

Steel Stud Profiles as

per system table at
600mm centres or
Gyprock SecurityWall
Panel 50
Screws
Adhesive
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges, &
Field
Screws at 600mm
to all stud profiles
OR
Screws at 600mm
and 300mm max.
horizontal centres to
steel sheeting
200mm
min.
2nd Layer
Fixing & Spacing
Recessed
Edges
Screws at corners
and 600mm max. cts
300mm
max.
Field
Rows of Adhesive
Daubs at 600mm
max. horizontal cts x
300mm max. vertical
cts and 200mm min.
Screw along
centreline at 1200mm
max. cts
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
300mm
max.
Gyprock
SecurityWall
Panel 27
200mm
max.
1x 10mm
GYPROCK
plasterboard CD
1x 16mm
GYPROCK
FYRCHEK
plasterboard
600mm
max.
Cavity
Insulation
Blanket
Base Track
300mm
max.

The Red Book
600mm
max.
Screw along sheet

centreline at
1200mm max. cts
B63
FIRE RATED
Security Wall
Track 50

Refer to Section A
1st Layer
Fixing & Spacing
Top, Bottom Screws at 600mm

& Field
x 300mm max.
all steel ribs
Gyprock
SecurityWall
Panel 50
216mm
typical.
1x 13mm
GYPROCK
FYRCHEK
plasterboard
Screws
Butt
Joints
Screws at
216mm max. centres
Corners &
Openings
Screws at
300mm max. centres
600mm
max.
Cavity
Insulation
Blanket
300mm
max.
Base Track


Head Angle
FIRE RATED
Security Wall
Track 50

Steel Stud Profiles as

per system table at
600mm centres or
Gyprock SecurityWall
Panel 50
200mm
max.
Gyprock
SecurityWall
Panel 50
1x 10mm
GYPROCK
plasterboard CD
1x 16mm
GYPROCK
FYRCHEK
plasterboard
200mm min.
600mm
max.
300mm max.
600mm
max.
433mm
typical

B64
Refer to Section A
1st Layer
Fixing & Spacing
Recessed
Edges
& Field
Screws at 600mm
to all stud profiles
OR
Screws at 600mm
x 300mm max.
all steel ribs
2nd Layer
Fixing & Spacing
Recessed
Edges
Screws at 450mm
max. cts
Field
Rows of Adhesive
Daubs at 600mm
max. horizontal cts x
300mm max. vertical
cts and 200mm min.
Screw along
centreline at 1300mm
max.cts
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
216mm
typical
Cavity
Insulation
Batts
Base Angles
Screws
Adhesive
300mm
max.
433mm
typical
Screw along sheet
centreline at
1200mm max. cts
The Red Book
FIG B22: INSTALLATION DETAIL FOR CINEMA WALL FOUR LAYER

HORIZONTAL SHEETING FRL 120/120/120 ONLY
For additional information, refer to GYP512, Gyprock Cinema Wall Systems.
Studs at 600mm max. cts. for 2 layers x 16mm GYPROCK Fyrchek

Stud centres
400mm
max. ctrs
450mm
max. ctrs
400mm
max. ctrs
450mm
max. ctrs
Fix 1st layer

to all studs
at 400mm
max. centres
Butt Joints
in 3rd/4th
layers offset
600mm min.
Stagger joints
300mm min.
400mm
max. ctrs
Stagger joints
300mm min.
450mm
max. ctrs
Install outer layer with 10mm

max. gap around wall perimeter
and fill with Gyprock Fire Mastic
Install all covered layers in

contact with the floor
1st layer position fasteners 10

to 16mm from sheet edges
Butt joints in 3rd and 4th

layers offset from
previous layer 300mm
minimum, offset from
adjacent sheets in same
layer 600mm minimum,
and fixed with
laminating screws
FIRE RATED
Screws
The Red Book
SUITABLE FOR:
Refer to Section A
1st Layer
Fixing & Spacing
At all studs
Screws at 400mm
max. centres
2nd, 3rd &

4th Layers
Fixing & Spacing
Recessed
Edges,
Field &
Butt Joints
Laminating screws at
450mm max.
horizontal centres
and 400mm max.
vertical centres
B65
Notes
B66
The Red Book
Section C
Contents
Timber Stud Height Tables
C2
Introduction
C3
C3 C4
Installation
C5
Components
C5
System Specifications Internal Walls

Single Stud
C6 C9
Double Stud
C10 C12
Party Wall
C13 C14
Staggered Stud
C15 C17
Resilient Mount
C18 C19
Studs Lined One Side
C20 C21
System Specifications External Walls

Cladding on Battens
C22 C23
Texture Base Sheet for Houses
C24
Hebel Powerpanel
C25
Masonry
C26 C27
Rendaline
C28 C29
Commercial ExpressWall
C30
Column & Beam
C31
The Red Book
C32 C37
C1
TABLE C1: mAximum TimBER sTud hEighT

NoN-LoAdBEARiNg WALLs shEETEd WiTh gYPRoCK NoN-FiRE gRAdE PLAsTERBoARd
uNiFoRm disTRiBuTEd LoAd (udL) = 0.25kPa.
Wall Frame
Timber Grade
and Sheeting
Stud Thickness (mm)
Configuration
Stud Depth (mm)
600mm cts.
450mm
cts.
70
F5
35
F8
45
35
F11
45
35
MGP 10
45
35
45
MGP 12
MGP 15
35
45
35
45
3.5
3.9
3.8
4.1
Maximum Stud Height (m)

2.9
3.1
3.2
3.3
3.3
3.6
3.0
3.6
90
3.7
4.0
4.1
4.4
4.3
4.7
4.2
4.6
4.6
5.0
4.9
5.3
120
5.0
5.4
5.5
5.9
5.7
6.0
5.6
6.0
6.0
6.0
6.0
6.0
70
3.2
3.5
3.5
3.8
3.7
4.0
3.6
3.9
3.9
4.3
4.1
4.5
90
4.1
4.5
4.5
4.9
4.7
5.1
4.6
5.1
5.0
5.5
5.3
5.8
120
5.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
70
2.7
2.9
2.9
3.2
3.1
3.3
3.0
3.3
3.3
3.6
3.5
3.8
90
3.4
3.7
3.8
4.1
4.0
4.3
3.9
4.2
4.2
4.6
4.5
4.9
120
4.6
5.0
5.0
5.5
5.3
5.8
5.2
5.7
5.6
6.0
6.0
6.0
600mm cts.
600mm max. cts
300mm 300mm
cts.
cts.
TABLE C2: mAximum TimBER sTud hEighT

NoN-LoAdBEARiNg WALLs shEETEd WiTh gYPRoCK FiRE gRAdE PLAsTERBoARd
uNiFoRm disTRiBuTEd LoAd (udL) = 0.25kPa
Wall Frame
Timber Grade
and Sheeting
Stud Thickness (mm)
Configuration
Stud Depth (mm)
600mm cts.
450mm
cts.
F5
35
F8
45
35
F11
45
35
MGP 10
45
35
45
MGP 12
35
MGP 15
45
35
45
70
3.1
3.4
3.4
3.7
3.6
3.9
3.5
3.8
3.8
4.2
4.1
4.4
90
4.0
4.4
4.4
4.8
4.6
4.8
4.5
5.0
4.9
5.4
5.2
5.7
120
5.4
5.8
5.9
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
70
3.4
3.7
3.8
4.1
3.9
4.3
3.9
4.2
4.2
4.6
4.5
4.9
90
4.4
4.8
4.9
5.3
5.1
5.5
5.0
5.5
5.4
5.9
5.8
6.0
120
5.9
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
70
2.9
3.1
3.2
3.3
3.6
3.9
3.0
3.6
3.5
3.9
3.8
4.1
90
3.7
4.0
4.1
4.4
4.3
4.7
4.2
4.6
4.6
5.0
4.9
5.3
120
5.0
5.4
5.5
5.9
5.7
6.0
5.6
6.0
6.0
6.0
6.0
6.0
600mm cts.
600mm max. cts
300mm 300mm
cts.
cts.
NOTES FOR TABLE C1 AND C2.

Stud heights have been determined based on a maximum deflection of H240 or 30mm maximum.
Noggings at 1350mm maximum centres, measured vertically. No noggings in staggered stud walls. No connection between wall frames in double
stud walls.
C2
The Red Book
Introduction
CSR Gyprock & Cemintel timber frame wall systems are
assemblies constructed from timber components with one
or more layers of Gyprock plasterboard and/or Cemintel
linings fixed to one or both sides.
A wide range of systems is available including fire rated walls,
internal and external walls, and for loadbearing applications.
Timber frame wall systems are typically used in multiresidential applications.
Design
Considerations
structural design
All walls must be designed for the applied loads. Guidance
is given for the selection of studs in non-loadbearing internal
walls only. For loadbearing walls and walls subject to wind
pressures, walls shall be designed to the appropriate
Australian Standards or construction manuals.
Non-Loadbearing Walls
Maximum wall height and the required stud size may be
selected from Table C1 or C2 appropriate for the selected
system. These walls are designed for lateral loads only, using
the composite action of the frame and sheeting.
Non-loadbearing walls in this manual have been designed
as follows for a minimum design pressure of 0.25kPa and a
maximum deflection of (height 240) or 30mm maximum.
(Based on BCA Specification C1.8, 3.4 (b)).
Wall plates must be fixed to floors and ceilings at 600mm
maximum centres. Each plate fixing is required to withstand
a shear load of 0.75kN for a UDL of 0.25kPa
Tall multi-residential buildings often have exterior operable
doors and windows, resulting in internal walls being subject
to wind pressure. In these cases, walls must be designed
for the appropriate loads.
The Red Book
Loadbearing Walls
Walls designed as loadbearing, with studs at 600mm
maximum centres and lined with GYPROCK FYRCHEK,
meet the requirements of BCA Specification C1.8 Clause
3.4 Walls generally.
The building designer must ensure loadbearing walls have
been designed:
To resist all applied loads.
To be in accordance with AS1720.1 or AS1684.
Assuming no contribution to axial strength is required of
the wall linings.
To meet the stated Fire Resistance Level (FRL), the axial load
capacity of some wall systems is reduced. This is a result
of loss of stud section from charring during a fire test. The
systems are noted with an Axial Capacity Reduction (ACR)
Group number. In these systems, the designer must increase
the applied loads to compensate for the axial capacity
reduction percentage, as shown in Table C3.
TABLE C3: AxiAL CAPACiTY REduCTioN (%) duE To
ThE EFFECT oF TimBER ChAR
Timber Size
Group 1
Group 2
Group 3
90x45
0%
0%
25%
90x35
0%
10%
30%
70x45
3%
25%
40%
70x35
8%
35%
45%
Fire Resistance
The timber frame wall systems in this manual are suitable
for the stated FRL when designed in accordance with the
structural considerations above. Wall system ratings apply
in either direction unless noted otherwise.
The fire design of timber framing is based on the principle that
a particular level of char is acceptable without compromising
the performance of the wall. CSR has carried out testing to
verify the char limit, and where it is exceeded, the allowable
axial capacity of the stud is reduced to account for the loss
of section.
To protect structural timber and steel beams and columns
within a wall, the FRL of the wall system must be at least
equivalent to that required by the structural member. For
example, a wall system with FRL 90/90/90 provides FRL
90// for a steel column within the wall.
C3
Framing & Lining

Timber stud walls required to have an FRL must comply with
the following:
Studs must be minimum 70 x 35mm and spaced at
Wall plates must be fixed to the fire rated support structure
with steel fasteners such as expansion anchors, easy drive
masonry anchors and power driven fasteners.
Curved walls (in plan) with a radius of curvature no less

than 3m.
The addition of any cladding.
The attachment of light weight fixtures through to the
framing.
Caulking
Fyrchek plasterboard and Cemintel fibre cement

products must be screw or nail fixed only, adhesive is not
permitted.
To attain the specified FRL, all perimeter gaps and

appropriate caulking material. CSR Gyprock Fire Mastic
or other tested fire and acoustic rated material of equivalent
or better performance must be used.
In wet areas, Gyprock Fyrchek MR should be used in

lieu of Gyprock Fyrchek.
Details for fire sealing of penetrations are shown later in this

section.
For single layer systems and first layer of multi-layer

systems, butt joints must be backed by either a stud or
nogging. Horizontal recessed joints must be backed by a
nogging or offset at least 300mm on opposite sides of the
wall.

movement, and may not be suitable for use as a general
purpose fire rated caulking. Its use is specified in some
wall/ceiling junctions; refer to Gyprock Ceiling Systems
Installation Guide, NGYP 570.
For multi-layer vertically sheeted applications, Fyrchek

outer layer butt joints may be reinforced using laminating
screws without the need for framing support.
Joints in the outer layer of all systems lined with

plasterboard or Wallboard must be set with Gyprock
paper tape. As a minimum, a single coat finish may be
used.
Joints in external systems lined with Cemintel Texture
Base Sheet must be set with the tape and compound
recommended for the texture coating system.
All joints in Cemintel Texture Base Sheet must be formed
on framing.
For additional information on frame design and detailing,
including treatment at junctions, sub floor and roof areas,
cavity barriers and penetrations, refer to Forest and Wood
Products publication Timber Framed Construction for MultiResidential Buildings.
The acoustic performance of wall systems is expressed in

terms of Rw and Rw+Ctr where appropriate. The performance
of the as-built system may be affected by: sound flanking,
the effectiveness of workmanship and caulking, the presence
and treatment of penetrations, and the inclusion of structural
elements and bridging items. Refer to Section A for detailed
information on addressing these issues.
general Notes
The acoustic performance of systems may be adversely
affected by the use of wider studs or closer spacings than
that specified.
In non-fire rated systems, to attain the stated acoustic
performance, use Gyprock Wet Area Acrylic Sealant,
Gyprock Fire Mastic or other tested acoustic rated
material of equivalent or better performance.
The Fire Resistance Level (FRL) of the systems detailed in

this section will not be detrimentally affected by;
The acoustic performance of CSR wall systems is not

adversely affected by:
Increasing the thickness of the wall.
the order of lining sheets that are fixed direct to framing.
Increasing the cross-sectional dimensions of the framing

elements.
the substitution of Aquachek for Gyprock Plasterboard

CD of the same thickness.
Decreasing the stud spacing.
the substitution of Gyprock Fyrchek MR for Fyrchek of

the same thickness.
Decreasing the fixing centres of wall sheet materials.

The inclusion of bulk cavity insulation materials such as
Glasswool, Rockwool and Polyester.
The use of Fyrchek MR, Impactchek, EC08 Fire or
EC08 Impact plasterboard in lieu of Fyrchek plasterboard
of the same thickness.
Additional layers of plasterboard or fibre cement.
C4
The Red Book
Installation
Framing
For detailed information on wall junctions, intersections,
frame attachments and penetrations, refer to Section Z of
this guide and Woods & Forests publication, Timber Framed
Construction for Mult-Residential Buildings.
Walls curved in plan may be built with timber stud frames.
Table for stud centres and plasterboard thickness for various
curvatures can be found in CSR Gyprock Residential
Installation, Guide NGYP547.
Gyprock Party Wall systems have additional installation
requirements. Refer to brochure NGYP513 Gyprock Party
Wall Systems.
Wallboard & Plasterboard Fixing

Interior walls may be built to achieve a particular Level of
Finish as defined in AS/NZS2589.1. The Level of Finish
specified can have requirements for frame alignment,
jointing and back blocking methods, and sheet orientation.
CeminSeal Wallboard and Gyprock plasterboard may be
installed vertically or horizontally, although for some Levels of
Finish horizontal sheeting must be used.
Walls with plasterboard outer layer: 12m maximum

centres.
External walls: Refer to the appropriate installation
manual.
At junctions with other building elements.
At junctions with different lining materials.
At change of structural support system.
At each storey or rise of studs.
External Walls
Gyprock timber frame external wall systems rely on a
range of cladding systems to provide weather resistance.
There is a range of effectiveness of these systems, and
CSR Gyprock recommends the cladding be installed with
a drained cavity. Cavity systems allow drainage and drying
of any water that penetrates, and are known to have good
long-term performance.
Sarking is also recommended to provide additional weather
protection to framing and lining.
External walls require specific design for condensation
control and energy efficiency, depending on the climate and
internal environment. Contact CSR Bradford for information
on thermal insulation systems and products.
Interior walls lined with Gyprock plasterboard or

CeminSeal Wallboard may be finished with tiles. Refer to
the relevant installation manual for details.
Components
Plasterboard Jointing & Finishing
Lining & Fixing materials

Refer to Section A for detailed information on CSR

Gyprock and Cemintel lining products, fixings, adhesive
and accessories.

the outer layer.
For details on Cemintel Texture Base Sheet, refer to manual

NFC122, Cemintel Texture Base Sheet for Applied Finish
Systems.
It is recommended that a water resistant taping compound,

such as Gyprock Wet Area Base Coat be used at vertical
wall junctions and horizontal and vertical joints within wet
areas such as showers.
For details on Cemintel RendaLine Faades, refer to CSR

guides FC945, Commercial RendaLine (using steel top
hat framing), and FC133, Residential RendaLine (using
timber battens
Control Joints
Framing

the frame, lining and any tiles.
Timber sizes indicated are nominal. For kiln-dried timber,

protect frames from wetting prior to and during construction
by wrapping exposed sections as soon as practicable
after erection. The timber should have a maximum of 16%
moisture content at the time of lining.

the building and at the following locations:
Non-tiled internal walls with fibre cement outer layer: 7.2m
maximum centres.
Tiled internal walls with fibre cement outer layer: 4.2m
maximum centres.
The Red Book
Accurate setting-out is required where 35mm wide framing

is used as the narrower member width is less able to
accommodate poor alignment.
C5
Timber Frame internal Wall systems single stud

sYsTEm sPECiFiCATioN
ACousTiC
oPiNioN
TYPiCAL LAYouT (CsR 305a shown)
PKA-051

Timber studs at 600mm maximum centres.
NOTES:
Acoustic performance valid for 35mm wide studs at
600mm centres.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
(a) Nil
Both SideS
1 x 10mm GYPROCK
Plasterboard CD.
Both SideS
//
1 x 13mm GYPROCK
Plasterboard CD.
Side one
1 x 13mm GYPROCK
Plasterboard CD.
//
Side two
1 x 13mm GYPROCK
AQUACHEK plasterboard.
CsR 315
Both SideS
//
2 x 10mm GYPROCK
Plasterboard CD.
33/26
35/28
34/25
36/27
37/28
39/30
2.0
35/25
37/27
38/28
40/30
32/25
34/27
34/27
36/29
90
110
140
160
(a) Nil
33/26
34/27
36/29
37/30
37/28
38/29
40/31
41/32
38/28
39/29
41/31
42/32
35/28
36/29
37/30
38/31
96
116
146
166
(a) Nil
34/27
35/28
37/30
38/31
38/29
39/30
41/32
42/33
39/29
40/30
42/32
43/33
36/29
37/30
38/31
39/32
96
116
146
166
(a) Nil
38/31
39/32
41/35
42/36
42/33
43/34
45/37
46/38
43/33
44/34
46/37
47/38
40/33
41/34
42/36
43/37
110
130
160
180
(a) Nil
40/33
42/36
43/37
44/38
44/35
46/38
47/39
48/40
45/35
47/38
48/39
49/40
42/35
44/38
44/38
45/39
122
142
172
192

(c) 75
Soundscreen
WALL THICKNESS mm
WALL THICKNESS mm
CsR 320
Both SideS
//
2 x 13mm GYPROCK
Plasterboard CD.
WALL THICKNESS mm
CsR 322
//
C6
140
32/25
WALL THICKNESS mm
CsR 311
120
30/23
WALL THICKNESS mm
CsR 310
90
Rw / Rw+Ctr
CsR 305
//
70
CAViTY iNFiLL
Side one
(a) Nil
34/27
35/28
37/30
38/31
1 x 13mm GYPROCK
Plasterboard CD.
38/29
39/30
41/32
42/33
Side two
39/29
40/30
42/32
43/33
1 x 13mm GYPROCK
IMPACTCHEK
plasterboard.
36/29
37/30
38/31
39/32
96
116
146
166
WALL THICKNESS mm
The Red Book

ACousTiC
oPiNioN
PKA-051

NOTES:
600mm centres.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
(a) Nil
Both SideS
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
37/30
38/31
39/32
39/30
41/32
42/33
43/34
2.0
40/30
42/32
43/33
44/34
37/30
39/32
39/32
40/33
90
110
140
160

(c) 75
Soundscreen
(a) Nil
34/27
35/28
38/30
38/31
1 x 10mm GYPROCK
38/29
39/30
41/32
42/33
Side two
39/26
40/30
42/32
43/33
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
36/29
37/30
38/31
39/32
90
110
140
160
(a) Nil
37/30
38/31
40/34
41/35
Both SideS
41/32
42/33
44/36
45/37
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
42/32
43/33
45/36
46/37
39/32
40/33
41/35
42/36
96
116
146
166
(a) Nil
42/35
44/38
45/39
46/40
Both SideS
46/37
48/40
49/41
50/42
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
47/37
49/40
50/41
51/42
44/37
46/40
46/40
47/41
110
130
160
180
(a) Nil
33/26
34/27
37/30
37/30
37/28
38/29
41/32
41/32
38/28
39/29
42/32
42/32
35/28
36/29
39/32
38/31
89
119
139
159
(a) Nil
35/28
37/30
39/32
39/32
39/30
41/32
43/34
43/34
40/30
42/32
44/34
44/34
37/30
39/32
41/34
40/33
92
112
142
162
WALL THICKNESS mm
WALL THICKNESS mm
CsR 335
//
WALL THICKNESS mm
CsR 326
Side one
1 x 13mm GYPROCK
Plasterboard CD.
//
Side two
1 x 6mm CeminSeal
Wallboard.
CsR 327
//
Side one
1 x 13mm GYPROCK
Plasterboard CD.
Side two
1 x 9mm CeminSeal
Wallboard.
The Red Book
140
Side one
CsR 354
//
120
35/28
WALL THICKNESS mm
CsR 330
90
Rw / Rw+Ctr
CsR 325
//
70
CAViTY iNFiLL
WALL THICKNESS mm
WALL THICKNESS mm
C7

ACousTiC
oPiNioN
PKA-051

NOTES:
600mm centres.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
(a) Nil
37/30
38/31
38/29
39/30
41/32
42/33
2.0
39/29
40/30
42/32
43/33
36/29
37/30
38/31
39/32
82
102
132
152
(a) Nil
41/34
43/37
45/39
45/39
45/36
47/39
49/41
49/41
46/36
48/39
50/41
50/41
1 x 6mm CeminSeal
Wallboard.
43/36
45/39
46/40
46/40
102
122
152
172

(c) 75
Soundscreen
WALL THICKNESS mm
Both SideS (Any order)
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
CsR 352
/60/60
and
30/30/30
FAR 2303
WALL THICKNESS mm
Side one (Any order)
(a) Nil
38/31
39/32
42/35
42/36
1 x 10mm GYPROCK
Plasterboard CD.
42/33
43/34
46/37
46/38
1 x 13mm GYPROCK
43/33
44/34
47/37
47/38
Side two
40/33
41/34
43/36
43/37
106
126
156
176
(a) Nil
35/28
37/30
38/31
39/33
39/30
41/32
42/33
43/35
40/30
42/32
43/33
44/35
37/30
39/32
39/32
40/34
96
116
146
166
(a) Nil
34/27
36/29
39/33
39/33
38/29
40/31
43/35
43/35
39/29
41/31
44/35
44/35
36/29
39/32
40/34
40/34
102
122
152
172
(a) Nil
41/34
43/37
45/39
45/39
45/36
47/39
49/41
49/41
46/36
48/39
50/41
50/41
43/36
45/39
46/40
46/40
108
128
158
178
1 x 13mm GYPROCK
CsR 350
/60/60
and
30/30/30
Both SideS
1 x 13mm GYPROCK
FAR 2303
WALL THICKNESS mm
WALL THICKNESS mm
CsR 355
/60/60
and
60/60/60
Both SideS
1 x 16mm GYPROCK
FAR 2303
WALL THICKNESS mm
CsR 660
/60/60
and
60/60/60
FAR 2303
Both SideS
1 x 6mm CeminSeal
1 x 13mm GYPROCK
WALL THICKNESS mm
C8
140
35/28
1 x 6mm CeminSeal
Wallboard.
//
120
34/27
Both SideS
CsR 653
90
Rw / Rw+Ctr
CsR 654
//
70
CAViTY iNFiLL
The Red Book

ACousTiC
oPiNioN
PKA-051

NOTES:
*ACR = Axial Capacity Reduction. (Refer to Table C3)
600mm centres.
FRL
Report/Opinion
sYsTEm
N
CsR 652
/90/90
and
60/60/60
Side one
Side Two
2 x 16mm GYPROCK
CsR 665
Both SideS
1 x 6mm CeminSeal
1 x 16mm GYPROCK
* ACR Group 3
FAR 2303
/90/90
and
60/60/60
FAR 2303
(a) Nil
39/32
41/34
42/36
43/37
43/34
45/36
46/38
47/39
2.0
44/34
46/36
47/38
48/39
41/34
43/36
43/37
44/38
118
138
168
188
(a) Nil
43/37
44/38
45/39
46/40
47/39
48/40
49/41
50/42
48/39
49/40
50/41
51/42
45/39
46/40
46/40
47/41
114
134
164
184

(c) 75
Soundscreen
WALL THICKNESS mm
(a) Nil
43/37
44/38
45/39
46/40
47/39
48/40
49/41
50/42
1 x 16mm GYPROCK
48/39
49/40
50/41
51/42
Side two
45/39
46/40
46/40
47/41
124
144
174
194
42/36
44/38
45/39
46/40
46/38
48/40
49/41
50/42
47/38
49/40
50/41
51/42
44/38
46/40
46/40
47/41
122
142
172
192
42/36
44/39
45/39
45/39
46/38
48/40
49/41
49/41
2.0
47/38
49/40
50/41
50/41
44/38
46/40
46/40
46/40
134
154
184
204
WALL THICKNESS mm
(a) Nil
Both SideS
2 x 13mm GYPROCK
FAR 2303
(b) 75 Gold
Batts
1.5
WALL THICKNESS mm
CsR 380
FAR 2303
(a) Nil
Both SideS
2 x 16mm GYPROCK

(c) 75
Soundscreen
WALL THICKNESS mm
The Red Book
140
Side one (Any order)
CsR 375
/120/120
and
120/120/120
120
1 x 6mm CeminSeal
Wallboard.
2 x 16mm GYPROCK
/120/120
and
90/90/90
90
Rw / Rw+Ctr
WALL THICKNESS mm
CsR 667
70
CAViTY iNFiLL
1 x 16mm GYPROCK
FAR 2303
/90/90
60/60/60
90/90/90*
sTud dEPTh mm
WALL LiNiNgs
C9
Timber Frame internal Wall systems double stud

ACousTiC
oPiNioN
PKA-051
2 rows Timber studs at 600mm maximum centres

in each row.
Discontinuous
Construction

20mm minimum gap between wall frames.
No connection between wall frames.
NOTES:
Unless otherwise specified, cavity infill is required in one stud row
only.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
CAViTY iNFiLL
48/42
49/43
50/44
Both SideS
55/47
57/49
58/50
59/51
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
56/47
58/49
59/50
60/51
54/48
56/50
57/51
58/52
186
226
286
326
(a) Nil
44/37
45/39
48/42
49/43
53/44
54/46
57/49
58/50
54/44
55/46
58/49
59/50
52/45
53/47
56/50
57/51
172
212
272
312
(a) Nil
48/42
49/43
50/44
51/45
57/49
58/50
59/51
60/52
58/49
59/50
60/51
61/52
56/50
57/51
58/52
59/53
178
213
278
318
(a) Nil
45/39
47/41
49/43
50/44
54/46
56/48
58/50
59/51
55/46
57/48
59/50
60/51
53/47
55/49
57/51
58/52
186
226
286
326
(a) Nil
50/44
52/46
53/47
54/48
59/51
61/53
62/54
63/55
60/51
62/53
63/54
64/55
58/52
60/54
61/55
62/56
212
252
312
352
(a) Nil
45/39
46/40
48/42
49/43
54/46
55/47
47/49
58/50
55/46
56/47
58/49
59/50
53/47
54/48
56/50
57/51
192
232
292
332
Both SideS
1 x 6mm CeminSeal
Wallboard .
WALL THICKNESS mm
CsR 675
Both SideS
1 x 9mm CeminSeal
Wallboard.
WALL THICKNESS mm
CsR 550
/60/60
and
30/30/30
Both SideS
1 x 13mm GYPROCK
FAR 2303
WALL THICKNESS mm
CsR 677
/60/60
and
30/30/30
1 x 13mm GYPROCK
Plasterboard CD.
1 x 13mm GYPROCK
FAR 2303
WALL THICKNESS mm
CsR 555
/60/60
and
60/60/60
FAR 2303
Both SideS
1 x 16mm GYPROCK
WALL THICKNESS mm
C10
140
46/40
CsR 674
//
120
(a) Nil
WALL THICKNESS mm
//
90
Rw / Rw+Ctr
CsR 553
//
70
The Red Book

ACousTiC
oPiNioN
PKA-051

in each row.
Discontinuous
Construction

20mm minimum gap and no connection between wall frames.
NOTES:
*ACR = Axial Capacity Reduction. (Refer to Table C3)
Unless otherwise specified, cavity infill is required in one stud row
only.
CSR 556 requires one row of batts in each stud row.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
CAViTY iNFiLL
Both SideS
1 x 16mm GYPROCK
FAR 2303
Both SideS
/60/60
and
60/60/60
1 x 10mm GYPROCK
Plasterboard CD.
1 x 16mm GYPROCK
FAR 2303
/60/60
and
60/60/60
46/40
48/42
49/43
(b) 2 x 75 Gold Batts 1.5
58/50
59/51
61/53
61/53
(c) 2 x 75 Soundscreen 2.0
59/50
60/51
62/53
62/53
57/51
58/52
59/53
60/54
192
232
292
332
(a) Nil
50/44
52/46
53/47
54/48
59/51
61/53
62/54
63/55
60/51
62/53
63/54
64/55
58/52
60/54
61/55
62/56
212
252
312
352
Side one
(a) Nil
48/42
50/44
51/45
52/46
1 x 16mm GYPROCK
57/49
59/51
60/52
61/53
58/49
60/51
61/52
62/53
56/50
58/52
59/53
60/54
198
238
298
338
(a) Nil
51/45
52/46
53/47
54/48
60/52
61/53
62/54
63/55
61/52
62/53
63/54
64/55
59/53
60/54
61/55
62/56
198
238
298
338
(a) Nil
51/45
52/46
54/48
55/49
60/52
61/53
63/55
64/56
61/52
62/53
64/55
65/56
59/53
60/54
62/56
63/57
204
244
304
344
(a) Nil
51/45
52/46
54/48
55/49
60/52
61/53
63/55
64/56
61/52
62/53
64/55
65/56
59/53
60/54
62/56
63/57
204
244
304
344
Side Two (Any order)

1 x 16mm GYPROCK
FAR 2303
1 x 6mm CeminSeal
Wallboard
CsR 680
Both SideS
/60/60
and
60/60/60
1 x 6mm CeminSeal
1 x 13mm GYPROCK
FAR 2303
WALL THICKNESS mm
WALL THICKNESS mm
CsR 681
/60/60
and
60/60/60
Both SideS
1 x 16mm GYPROCK
(against studs).
1 x 6mm CeminSeal
Wallboard.
FAR 2303
CsR 682
/90/90
60/60/60
90/90/90*
* ACR Group 3
FAR 2303
Both SideS
1 x 6mm CeminSeal
1 x 16mm GYPROCK
WALL THICKNESS mm
WALL THICKNESS mm
The Red Book
140
45/39
WALL THICKNESS mm
CsR 579
120
(a) Nil
WALL THICKNESS mm
CsR 678
90
Rw / Rw+Ctr
CsR 556
/60/60
and
60/60/60
70
C11

ACousTiC
oPiNioN
PKA-051

in each row.
Discontinuous
Construction

20mm minimum gap between wall frames.
No connection between wall frames.
NOTES:
Unless otherwise specified, cavity infill is required in one
stud row only.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
CAViTY iNFiLL
Both SideS
2 x 13mm GYPROCK
FAR 2303
/120/120
and
120/120/120
Both SideS
2 x 16mm GYPROCK
FAR 2303
/120/120
and
120/120/120
FAR 2303
Both SideS
3 x 16mm GYPROCK
52/46
54/48
54/48
60/52
61/53
63/55
63/55
61/52
62/53
64/55
64/55
59/53
60/54
62/56
62/56
212
252
312
352
(a) Nil
51/45
52/46
53/47
54/48
60/52
61/53
62/54
63/55
61/52
62/53
63/54
64/55
59/53
60/54
61/55
62/56
224
264
324
364
(a) Nil
54/48
55/49
56/50
57/51
63/55
64/56
65/57
66/58
64/55
65/56
66/57
67/58
62/56
63/57
64/58
65/59
256
296
356
396
WALL THICKNESS mm
C12
140
51/45
WALL THICKNESS mm
CsR 582
120
(a) Nil
WALL THICKNESS mm
CsR 580
90
Rw / Rw+Ctr
CsR 575
/120/120
and
90/90/90
70
The Red Book
Timber Frame internal Wall systems Party Wall with 25mm Fire Barrier
ACousTiC
oPiNioN
PKA-018
Discontinuous
Construction

SHAFT LINER PANEL.
25mm GYPROCK SHAFT LINER PANEL between steel HStuds at 600mm maximum centres.
SHAFT LINER PANEL.
NOTES: Refer to GYP513 Gyprock Party Wall System for
design considerations.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
CsR 360
CAViTY iNFiLL
Both sides (Refer to section A)
70
90
Rw / Rw+Ctr
(a) 75 Gold Batts 2.0
60/47
61/49
60/60/60
Both SideS
61/48
62/50
EWFA 45743
1 x 10mm GYPROCK
SUPERCHEK.
61/48
62/50
225
265
61/49
62/50
WALL THICKNESS mm
CsR 361
60/60/60
Both SideS
62/50
63/51
EWFA 45743
2 x 10mm GYPROCK
Plasterboard CD.
62/50
63/51
245
285
61/49
62/50
WALL THICKNESS mm
CsR 362
60/60/60
Both SideS
62/50
63/51
EWFA 45743
1 x 13mm GYPROCK
SOUNDCHEK.
62/50
63/51
231
271
62/50
63/51
WALL THICKNESS mm
CsR 363
60/60/60
1 x 6mm CeminSeal
Wallboard.
62/50
63/51
EWFA 45743
1 x 10mm GYPROCK
63/51
64/52
237
277
WALL THICKNESS mm
CsR 364
60/60/60
EWFA 45743
The Red Book
61/49
62/50
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
62/50
63/51
63/51
64/52
245
285
1 x 10mm GYPROCK
plasterboard CD.
WALL THICKNESS mm
C13
Timber Frame internal Wall systems Party Wall with 41mm Fire Barrier
ACousTiC
oPiNioN
PKA-018
Discontinuous
Construction

SHAFT LINER PANEL.
25mm GYPROCK SHAFT LINER PANEL between steel Hstuds at 600mm maximum centres.
16mm GYPROCK FYRCHEK screw laminated to SHAFT
LINER
FYRCHEK.
NOTES: Refer to GYP513 Gyprock Party Wall System for
design considerations.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
CAViTY iNFiLL
Both sides (Refer to Section A)
CsR 368
70
90
Rw / Rw+Ctr
63/51
64/52
90/90/90
Both SideS
64/52
65/53
EWFA 45743
1 x 10mm GYPROCK
SUPERCHEK
63/50
64/51
241
281
64/52
65/53
WALL THICKNESS mm
CsR 369
90/90/90
Both SideS
65/53
66/54
EWFA 45743
2 x 10mm GYPROCK
Plasterboard CD
64/51
65/52
261
301
64/52
65/53
WALL THICKNESS mm
CsR 370
90/90/90
Both SideS
65/53
66/54
EWFA 45743
1 x 13mm GYPROCK
SOUNDCHEK
64/51
65/52
247
287
63/50
64/52
WALL THICKNESS mm
CsR 371
90/90/90
Both SideS
64/51
65/53
EWFA 45743
1 x 6mm CeminSeal
Wallboard
64/50
65/52
233
273
63/51
64/52
WALL THICKNESS mm
CsR 372
90/90/90
Both SideS
64/52
65/53
EWFA 45743
1 x 13mm GYPROCK
AQUACHEK Plasterboard
63/50
64/51
247
287
WALL THICKNESS mm
C14
The Red Book
Timber Frame internal Wall systems staggered stud

ACousTiC
oPiNioN
PKA-051

Staggered timber studs at 600mm maximum centres each
side.
NOT
Deemed
Discontinuous
Construction
Minimum 20mm clearance between stud and opposing

lining.
No noggings or any connection between studs.
Cavity insulation as per system table. (Insulation may need
to be cut and placed between studs).
FRL
Report/Opinion
sYsTEm
N
WALL LiNiNgs
CsR 425
(a) Nil
Both SideS
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
PLATE WidTh mm
Both SideS
//
1 x 13mm GYPROCK
Plasterboard CD.
Side one
1 x 10mm GYPROCK
Plasterboard CD.
//
Side two
1 x 6mm CeminSeal
Wallboard.
CsR 662
//
Side one
1 x 10mm GYPROCK
SUPERCHEK.
Side two
1 x 6mm CeminSeal
Wallboard.
The Red Book
140
43/36
44/37
50/41
52/43
53/44
2.0
51/41
53/43
54/44
48/41
49/42
50/43
110
140
160
(a) Nil
40/33
41/34
43/36
49/40
50/41
52/43
50/40
51/41
53/43
47/40
47/40
49/42
116
146
166
(a) Nil
38/31
40/33
41/34
47/38
49/40
50/41
48/38
50/40
51/41
45/38
46/39
47/40
106
136
156
(a) Nil
41/34
43/36
44/37
50/41
52/43
53/44
51/41
53/43
54/44
48/41
49/42
50/43
106
136
156

(c) 75
Soundscreen
WALL THICKNESS mm
CsR 661
120
Rw / Rw+Ctr
41/34
WALL THICKNESS mm
CsR 422
90
CAViTY iNFiLL (Refer to Section A)
WALL THICKNESS mm
WALL THICKNESS mm
C15

ACousTiC
oPiNioN
PKA-051

Staggered timber studs at 600mm maximum centres each
side.
NOT
Deemed
Discontinuous
Construction
Minimum 20mm clearance between stud and opposing

lining.
Cavity insulation as per system table. (Insulation may need
to be cut and placed between studs).
FRL
Report/Opinion
sYsTEm
N
PLATE WidTh mm
WALL LiNiNgs
CAViTY iNFiLL
40/33
42/35
43/36
49/40
51/42
52/43
50/40
52/42
53/43
47/40
48/41
49/42
102
132
152
(a) Nil
44/37
45/39
47/41
53/44
54/46
56/48
54/44
55/46
57/48
51/44
51/45
53/47
108
138
158
(a) Nil
40/33
41/34
43/36
49/40
50/41
52/43
50/40
51/41
53/43
47/40
47/40
49/42
109
139
159
(a) Nil
49/43
50/44
51/45
Both SideS
58/50
59/51
60/52
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
59/50
60/51
61/52
56/50
56/50
57/51
130
160
180
(a) Nil
41/34
44/37
44/38
50/41
53/44
53/45
51/41
54/44
54/45
48/41
50/43
50/44
116
146
166
(a) Nil
42/35
43/37
44/38
51/42
52/44
53/45
52/42
53/44
54/45
49/42
49/43
50/44
122
152
172
1 x 6mm CeminSeal
Wallboard.
WALL THICKNESS mm
CsR 664
Both SideS
1 x 9mm CeminSeal
Wallboard.
WALL THICKNESS mm
CsR 666
Side one
1 x 13mm GYPROCK
Plasterboard CD.
//
Side two
1 x 6mm CeminSeal
Wallboard.
CsR 430
//
WALL THICKNESS mm
WALL THICKNESS mm
CsR 450
/60/60
and
30/30/30
Both SideS
1 x 13mm GYPROCK
FAR 2303
WALL THICKNESS mm
CsR 455
/60/60
and
60/60/60
FAR 2303
Both SideS
1 x 16mm GYPROCK
WALL THICKNESS mm
C16
140
(a) Nil
Both SideS
//
120
Rw / Rw+Ctr
CsR 663
//
90
The Red Book

ACousTiC
oPiNioN
PKA-051

Staggered timber studs at 600mm maximum centres each side.
NOT
Deemed
Discontinuous
Construction
Minimum 20mm clearance between stud and opposing lining.

Cavity insulation as per system table. (Insulation may need to be
cut and placed between studs).
NOTES: *ACR = Axial Capacity Reduction. (Refer to Table C3).
FRL
Report/Opinion
sYsTEm
N
PLATE WidTh mm
WALL LiNiNgs
Both SideS
1 x 6mm CeminSeal
Wallboard.(against studs).
1 x 13mm GYPROCK
FAR 2303
CAViTY iNFiLL
/60/60
and
60/60/60
Both SideS
1 x 16mm GYPROCK
(against studs).
1 x 6mm CeminSeal
Wallboard.
FAR 2303
CsR 672
/90/90
and
90/90/90*
Both SideS
1 x 6mm CeminSeal
* ACR Group 3
1 x 16mm GYPROCK
FAR 2303
48/42
49/43
50/44
57/49
58/50
59/51
58/49
59/50
60/51
55/49
55/49
56/50
128
158
178
(a) Nil
49/43
50/44
51/45
58/50
59/51
60/52
59/50
60/51
61/52
59/50
56/50
57/51
134
164
184
(a) Nil
49/43
50/44
51/45
58/50
59/51
60/52
59/50
60/51
61/52
59/50
56/50
57/51
134
164
184
(a) Nil
49/43
50/44
51/45
58/50
59/51
60/52
59/50
60/51
61/52
56/50
56/50
57/51
142
172
192
(a) Nil
48/42
49/43
50/44
57/49
58/50
59/51
58/49
59/50
60/51
55/49
55/49
56/50
154
184
204
WALL THICKNESS mm
WALL THICKNESS mm
CsR 475
/120/120
and
90/90/90
Both SideS
2 x 13mm GYPROCK
FAR 2303
WALL THICKNESS mm
CsR 480
/120/120
and
120 /120/120
FAR 2303
Both SideS
2 x 16mm GYPROCK
WALL THICKNESS mm
The Red Book
140
(a) Nil
WALL THICKNESS mm
CsR 671
120
Rw / Rw+Ctr
CsR 670
/60/60
and
60/60/60
90
C17
Timber Frame internal Wall systems Resilient mount

ACousTiC
oPiNioN
PKA-051
NOT
Deemed
Discontinuous
Construction

Gyprock Resilient Mounts and RONDO N308 or 129
Furring Channel clipped to resilient mounts.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
CAViTY iNFiLL
44/38
45/39
46/40
Both SideS
50/41
52/44
53/45
53/45
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
51/41
53/44
54/45
54/45
48/41
50/44
50/44
51/45
124
144
174
194
42/35
43/36
45/38
45/39
50/41
51/42
53/44
52/44
2.0
51/41
52/42
54/44
53/44
48/41
49/42
50/43
50/44
117
137
167
187
Side one (Mount Side)
Side two
1 x 6mm CeminSeal
Wallboard.
CsR 403
//
47/40
48/42
48/42
53/44
55/46
56/48
55/47
54/44
56/46
57/48
56/47
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
51/44
53/46
53/47
53/47
128
148
178
198
(a) Nil
44/37
45/38
47/40
47/40
52/43
53/44
55/46
54/45
53/43
54/44
56/46
55/45
50/43
51/44
52/45
52/45
128
148
178
198
44/37
46/39
47/40
48/42
52/43
54/45
55/46
55/47
53/43
55/45
56/46
56/47
50/43
52/45
52/45
53/47
124
144
174
194

2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
Side two
1 x 6mm CeminSeal
Wallboard.
C18
45/38
1 x 10mm GYPROCK
//
(c) 75
Soundscreen
(a) Nil
Side two
CsR 411
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
(a) Nil
Side One (Mount Side)
Side Two
CsR 410
140
42/35
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
120
(a) Nil
CsR 407
90
Rw / Rw+Ctr
CsR 406
//
70

(a) Nil
(b) 75 Gold
Batts
1.5
The Red Book
Timber Frame internal Wall systems Resilient mount

ACousTiC
oPiNioN
PKA-051
NOT
Deemed
Discontinuous
Construction

Gyprock Resilient Mounts and RONDO N308 or 129
Furring Channel clipped to resilient mounts.
FRL
Report/Opinion
sYsTEm
N
sTud dEPTh mm
WALL LiNiNgs
CAViTY iNFiLL
Both SideS
1 x 16mm GYPROCK
FAR 2303
/120/120
and
90/90/90
2 x 13mm GYPROCK
FAR 2303
43/37
44/38
44/38
49/40
51/43
52/44
51/43
50/40
52/43
53/44
52/43
47/40
49/43
49/43
49/43
130
150
180
200
48/42
49/43
50/44
51/45
56/48
57/49
58/50
58/50
2.0
57/48
58/49
59/50
59/50
54/48
55/49
55/49
56/50
150
170
200
220
(a) Nil
48/42
49/43
50/44
50/44
56/48
57/49
58/50
57/49
57/48
58/49
59/50
58/49
54/48
55/49
55/49
55/49
162
182
212
232

(c) 75
Soundscreen
CsR 419
/120/120
and
120/120/120
FAR 2303
Both SideS
2 x 16mm GYPROCK
The Red Book
140
41/34
(a) Nil
Both SideS
120
(a) Nil
CsR 415
90
Rw / Rw+Ctr
CsR 414
/60/60
and
60/60/60
70
C19
Timber Frame internal Wall systems Lined one side

ACousTiC
oPiNioN
PKA-051

FRL
Report/Opinion
sYsTEm
N
WALL LiNiNgs
sTud dEPTh mm
70
Rw / Rw+Ctr
CsR 386
one Side only
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
(a) Nil
26/24
WALL THICKNESS mm
80
CsR 387
one Side only
//
(a) Nil
26/24
1 x 13mm GYPROCK
Plasterboard CD.
WALL THICKNESS mm
83
CsR 388
one Side only
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
(a) Nil
30/28
WALL THICKNESS mm
83
CsR 389
one Side only
//
(a) Nil
29/27
1 x 16mm GYPROCK
WALL THICKNESS mm
C20
86
The Red Book
Timber Frame internal Wall systems Lined one side

ACousTiC
oPiNioN
PKA-051

FRL
Report/Opinion
/30/30
and
30/30/30
sYsTEm
N
one Side only
Fire rated from

lined side only
FAR 2303
The Red Book
(a) Nil
Rw / Rw+Ctr
35/32
WALL THICKNESS mm
96
CsR 391
one Side only
(a) Nil
35/32
2 x 16mm GYPROCK
WALL THICKNESS mm
102
CsR 392
one Side only
(a) Nil
38/35
3 x 13mm GYPROCK
Fire rated from

lined side only
FAR 2303
/120/120
and
120/120/120
70
2 x 13mm GYPROCK
Fire rated from

lined side only
FAR 2303
/90/90
and
90/90/90
sTud dEPTh mm
CsR 390
Fire rated from

lined side only
FAR 2303
/60/60
and
60/60/60
WALL LiNiNgs
WALL THICKNESS mm
109
CsR 393
one Side only
(a) Nil
38/35
3 x 16mm GYPROCK
WALL THICKNESS mm
118
C21
Timber Frame External Wall systems Cladding on Battens

ACousTiC
oPiNioN
External cladding material on battens.
PKA-055
Sarking.
Lining material as per system table to external side.
Lining material as per system table to internal side.
NOTES:
*ACR = Axial Capacity Reduction. (Refer to Table C3).
600mm centres.
FRL
Report/Opinion
sYsTEm
N
CsR 906
WALL LiNiNgs
from outside only
Rt(sum)
(a) Nil
35
1.0
0.9
38
2.4
2.2
39
2.9
2.7
154
externAl wAll Side
(a) Nil
36
1.0
1.0
1 x 16mm GYPROCK
FYRCHEK MR plasterboard.
39
2.4
2.2
40
3.0
2.7
157
externAl wAll Side
(a) Nil
38
1.1
1.0
1 x 16mm GYPROCK
41
2.5
2.3
42
3.0
2.8
163
externAl wAll Side
(a) Nil
38
1.1
1.0
2 x 13mm GYPROCK
41
2.4
2.2
42
2.9
2.7
167
(a) Nil
40
1.1
1.1
43
2.4
2.2
44
3.0
2.7
173
(a) Nil
44
1.3
1.2
47
2.6
2.4
48
3.1
2.8
195
externAl wAll Side
1 x 6mm CSR CeminSeal

Wallboard.
CsR 900
60/60/60*
from outside only
* ACR Group 2
internAl wAll Side

1 x 10mm GYPROCK
Plasterboard CD.
FAR 2303
CsR 901
60/60/60
internAl wAll Side
FAR 2303
1 x 16mm GYPROCK
CsR 907
90/90/90
from outside only
internAl wAll Side
FAR 2303
1 x 10mm GYPROCK
Plasterboard CD.
CsR 908
internAl wAll Side
FAR 2303
1 x 10mm GYPROCK
Plasterboard CD.
CsR 909
120/120/120
FAR 2303
externAl wAll Side

2 x 16mm GYPROCK
120/120/120
from outside only
externAl wAll Side

2 x 16mm GYPROCK
internAl wAll Side
2 x 16mm GYPROCK
C22
ThERmAL
Rt(win)
internAl wAll Side
FAR 2303
90
Rw
1 x 16mm GYPROCK
30/30/30
sTud dEPTh mm
The Red Book
Timber Frame External Wall systems Cladding on Battens

ACousTiC
oPiNioN
External cladding material on battens.

PKA-055
Sarking.
NOTES:
600mm centres.
FRL
Report/Opinion
sYsTEm
N
WALL LiNiNgs
externAl wAll Side
60/60/60
and
(90/90/90*
CsR 911
1 x 6mm
CSR CeminSeal
Wallboard (against studs)
1 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
from outside only)

* ACR Group 3
1 x 16mm GYPROCK
externAl wAll Side
CsR 912
* ACR Group 3
FAR 2303
90
ThERmAL
Rw
Rt(win)
Rt(sum)
(a) Nil
40
1.1
1.0
43
2.5
2.3
44
3.0
2.8
internAl wAll Side
FAR 2303
90/90/90*
sTud dEPTh mm
1 x 6mm
CSR CeminSeal
Wallboard (against studs)
1 x 16mm GYPROCK
FYRCHEK MR
plasterboard.
169
(a) Nil
44
1.2
1.1
48
2.5
2.3
49
3.0
2.8
internAl wAll Side

2 x 13mm GYPROCK
The Red Book
179
C23
Timber Frame External Wall systems Texture Base sheet for houses
ACousTiC
oPiNioN
External cladding of 1 x 7.5mm CSR Cemintel Texture Base Sheet.

PKA-051
Sarking.
NOTES:
Acoustic performance valid for 35mm wide studs at 600mm
centres.
FRL
Report/Opinion
sYsTEm
N
CsR 902
60/60/60*
from outside only
60/60/60*
* ACR Group 1
FAR 2303
60/60/60
and
90/90/90*
* ACR Group 3
FAR 2303
C24
0.5
1 x 13mm GYPROCK
46/37
3.2
2.9
45/35
2.4
2.2
120
(a) Nil
40/33
0.5
0.5
1 x 13mm GYPROCK
46/37
3.2
2.9
45/35
2.5
2.3
WALL THICKNESS mm
126
externAl wAll Side
(a) Nil
45/39
0.6
0.6
1 x 16mm GYPROCK
51/43
3.3
3.0
50/41
2.5
2.3
2 x 13mm GYPROCK
CsR 916
WALL THICKNESS mm
externAl wAll Side
internAl wAll Side
FAR 2303
Rt(sum)
0.5
1 x 16mm GYPROCK
* ACR Group 3
ThERmAL
Rt(win)
40/33
internAl wAll Side
CsR 915
90
Rw / Rw+Ctr
(a) Nil
1 x 10mm GYPROCK
Plasterboard CD.
CsR 903
sTud dEPTh mm
externAl wAll Side
internAl wAll Side
* ACR Group 1
FAR 2303
60/60/60
and
90/90/90*
WALL LiNiNgs
externAl wAll Side

1 x 16mm GYPROCK
internAl wAll Side
1 x 6mm CSR CeminSeal
1 x 16mm GYPROCK
WALL THICKNESS mm
139
(a) Nil
45/39
0.6
0.6
51/43
3.2
3.0
50/41
2.5
2.3
WALL THICKNESS mm
135
The Red Book
Timber Frame External Wall systems hebel Powerpanel

ACousTiC
oPiNioN
TYPiCAL LAYouT (hEBEL 1400)
2010675.1/
2401A/R1/Jh
CSR Hebel Powerpanel AAC (75mm) screw fixed to

22mm battens installed at 1200mm maximum vertical
centres.
NOTES:
Refer to CSR Hebel for design considerations and panel
installation details.
FRL
Report/Opinion
sYsTEm
N
WALL LiNiNgs
hEBEL 1400
240/180/180
from outside only
FSV 0536
sTud dEPTh mm
90
Rw / Rw+Ctr
(a) Nil
46/40
ThERmAL
Rt(win)
Rt(sum)
46/40
0.9
0.9
53/44
53/45
2.8
2.6
177
197
internAl wAll Side

1 x 10mm GYPROCK
Plasterboard CD.
The Red Book
70
C25
Timber Frame External Wall systems masonry

ACousTiC
oPiNioN
PKA-055
Timber studs at 600mm maximum centres with 40mm

NOTES:
To achieve stated acoustic performance masonry must be
a minimum of 90mm thick and 170kg/m2.
FRL
Report/Opinion
sYsTEm
N
CsR 923
60/60/60
from outside only
WALL LiNiNgs
60/60/60
from outside only
CsR 925
60/60/60
from outside only
CsR 920
60/60/60
FAR 2303
60/60/60*

FRL 60/60/60.
59/50
2.1
2.0
60/51
3.2
2.9
* ACR Group 1
FAR 2303
Refer to masonry
manufacturer
C26
WALL THICKNESS mm
250
externAl Side
(a) Nil
53/46
0.5
0.5

FRL 60/60/60.
60/53
2.1
2.0
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
61/54
3.2
2.9
externAl Side
(a) Nil
56/49
0.6
0.6

FRL 60/60/60.
63/56
2.2
2.0
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
64/57
3.2
3.0
externAl Side
(a) Nil
54/46
0.6
0.6

FRL 60/60/60.
61/53
2.2
2.0
62/54
3.2
2.9
1 x 16mm GYPROCK
CsR 927
Rt(sum)
0.5
internAl Side
Refer to masonry
manufacturer
Rt(win)
0.5
internAl Side
Refer to masonry
manufacturer
Rw / Rw+Ctr
52/44
internAl Side
Refer to masonry
manufacturer
ThERmAL
(a) Nil
1 x 10mm GYPROCK
Plasterboard CD.
CsR 924
90
externAl Side
internAl Side
Refer to masonry
manufacturer
sTud dEPTh mm
externAl Side
FRL 60/60/60.
internAl Side
1 x 6mm CeminSeal
1 x 13mm GYPROCK
WALL THICKNESS mm
WALL THICKNESS mm
WALL THICKNESS mm
250
260
256
(a) Nil
54/46
0.6
0.6
61/53
2.2
2.0
62/54
3.2
2.9
WALL THICKNESS mm
259
The Red Book
Timber Frame External Wall systems masonry

ACousTiC
oPiNioN
PKA-055

NOTES:
a minimum of 90mm thick and 170kg/m2.
FRL
Report/Opinion
sYsTEm
N
CsR 921
90/90/90
internAl Side
Refer to masonry
manufacturer
* ACR Group 3
FAR 2303
Refer to masonry
manufacturer
The Red Book
externAl Side
FRL 90/90/90.
FAR 2303
90/90/90*
WALL LiNiNgs
2 x 13mm GYPROCK
CsR 928
externAl Side
FRL 90/90/90.
internAl Side
1 x 6mm CeminSeal
1 x 16mm GYPROCK
sTud dEPTh mm
90
ThERmAL
Rw / Rw+Ctr
Rt(win)
Rt(sum)
(a) Nil
56/49
0.6
0.6
63/56
2.2
2.0
64/57
3.3
3.0
WALL THICKNESS mm
266
(a) Nil
56/49
0.6
0.6
63/56
2.2
2.0
64/57
3.2
3.0
WALL THICKNESS mm
262
C27
Timber Frame External Wall systems RendaLine

1 x Cemintel RendaLine sheet on timber battens.
ACousTiC
oPiNioN
PKA-051
Sarking.
NOTES:
centres.
FRL
Report/Opinion
sTud dEPTh mm
90
Rw
Rt(win)
Rt(sum)
(a) Nil
39
1.7
1.5
internAl Side
45
2.5
2.3
1 x 10mm GYPROCK
Plasterboard CD.
45
3.6
3.3
sYsTEm
N
WALL LiNiNgs
CsR 690
//
WALL THICKNESS mm
ThERmAL
143
ACousTiC
oPiNioN

PKA-055
Sarking.
1 x 13mm GYPROCK FYRCHEK MR plasterboard.
NOTES:
centres.
FRL
Report/Opinion
sYsTEm
N
CsR 693
60/60/60
sTud dEPTh mm
90
Rw
Rt(win)
Rt(sum)
externAl Side
(a) Nil
45
1.2
1.1
As per system
specification.
51
2.6
2.4
53
3.7
3.4
WALL LiNiNgs
internAl Side
FAR 2303
1 x 16mm GYPROCK
CsR 696
60/60/60*
From outside only
* ACR Group 2
FAR 2303
C28
WALL THICKNESS mm
ThERmAL
162
externAl Side
(a) Nil
43
1.2
1.1
As per system
specification.
49
2.6
2.4
51
3.7
3.3
internAl Side
1 x 10mm GYPROCK
Plasterboard CD.
WALL THICKNESS mm
156
The Red Book
Timber Frame External Wall systems RendaLine

ACousTiC
oPiNioN
PKA-051
25mm Bradford Fibertex 450 Rockwool (80kg/m3) between battens.

Wire mesh and sarking.
NOTES:
Acoustic performance valid for 35mm wide studs at 600mm centres.
FRL
Report/Opinion
sTud dEPTh mm
90
Rw
Rt(win)
Rt(sum)
externAl Side
(a) Nil
48
1.8
1.6
As per system
specification.
50
2.6
2.4
50
3.6
3.3
sYsTEm
N
CsR 694
60/60/60
WALL LiNiNgs
internAl Side
FAR 2303
1 x 16mm GYPROCK
CsR 697
60/60/60
From outside only
149
externAl Side
(a) Nil
45
1.8
1.5
As per system
specification.
47
2.6
2.3
47
3.6
3.3
internAl Side
FAR 2303
WALL THICKNESS mm
ThERmAL
1 x 10mm GYPROCK
Plasterboard CD.
WALL THICKNESS mm
143
ACousTiC
oPiNioN
PKA-055
25mm Bradford Fibertex 450 Rockwool (80kg/m3) between battens

1 x 6mm CeminSeal Wallboard.
NOTES:
Acoustic performance valid for 35mm wide studs at 600mm centres.
FRL
Report/Opinion
sYsTEm
N
CsR 695
internAl Side
* ACR Group 3
1 x 6mm CeminSeal
FAR 2303
90
Rw
Rt(win)
Rt(sum)
(a) Nil
51
1.2
1.2
54
2.6
2.4
55
3.7
3.4
WALL THICKNESS mm
ThERmAL
161
externAl Side
(a) Nil
50
1.3
1.2
As per system
specification.
53
2.7
2.5
54
3.7
3.4
internAl Side
2 x 13mm GYPROCK
The Red Book
sTud dEPTh mm
1 x 16mm GYPROCK
CsR 698
FAR 2303
externAl Side
As per system specification.
90/90/90*
90/90/90
WALL LiNiNgs
WALL THICKNESS mm
165
C29
Timber Frame External Wall systems Commercial ExpressWall

ACousTiC
oPiNioN
PKA-055
Cemintel Commercial ExpressWall system.

Sarking.
1 x 16mm GYPROCK FYRCHEK MR plasterboard fixed to
framing.
Timber stud framing as required.
1 layer x 10mm GYPROCK plasterboard CD fixed to framing.
NOTES: *ACR = Axial Capacity Reduction. (Refer to Table C3).
FRL
Report/Opinion
sYsTEm
N
WALL LiNiNgs
CsR 905
sTud dEPTh mm
90
Rw
Rt(win)
ThERmAL
Rt(sum)
(a) Nil
41
1.2
1.1
46
2.6
2.4
45
externAl Side of frAMing

1 layer x 16mm
GYPROCK FYRCHEK MR
plasterboard.
60/60/60*
from outside only
* ACR Group 2
internAl Side of frAMing

1 layer x 10mm
CD fixed to framing.
FAR 2303
WALL THICKNESS mm
160
ACousTiC
oPiNioN
Cemintel Commercial ExpressWall system.
PKA-055
150mm thick hollow block masonry wall.

minimum gap and no ties to masonry.
NOTES:
a minimum of 140mm thick and 180kg/m2 laid.
FRL
Report/Opinion
sYsTEm
N
WALL LiNiNgs
CsR 936
externAl Side
//
Masonry veneer
block wall with 1 x
9mm. CSR Cemintel
ExpressWall cladding
system.
internAl Side
1 x 13mm GYPROCK
Plasterboard CD.
C30
sTud dEPTh mm
90
ThERmAL
Rw / Rw+Ctr
Rt(win)
Rt(sum)
(a) Nil
53/39
0.8
0.8
59/45
2.4
2.2
59/45
2.9
2.7
WALL THICKNESS mm
345
The Red Book
Column and Beam systems

Fig C1: TimBER BEAm ENCAsEmENT sYsTEm
(Third layer must be fixed to second layer specifications)
The CSR Gyprock Timber Column and Beam Encasement

Systems provide up to 120 minutes structural fire resistance
to timber column and beam sections.
Fix ceiling layer

before applying
layer to beam
All nails must have a minimum penetration into the timber

of 20mm minimum for FRL up to 90// and a minimum
penetration of 30mm for FRL 120//.
Tape and set

external angle
Fix External Angle

Bead and set corners
FRL
Report/Opinion
sYsTEm
N
75mm
max.
WALL LiNiNgs
CsR 493
1 x 13mm
GYPROCK
FYRCHEK
plasterboard.
30/ /
CSIRO
FCO 1494
CsR 494
2 x 13mm
GYPROCK
FYRCHEK
plasterboard.
60/ /
CSIRO
FCO 1494
75mm
max.
CsR 496
2 x 16mm
GYPROCK
FYRCHEK
plasterboard.
90/ /
CSIRO
FCO 1494
CsR 498
120/ /
CSIRO
FCO 1494
3 x 13mm
GYPROCK
FYRCHEK
plasterboard.
Nail fix each layer

at 200mm max.
horizontal and
vertical centres
200mm max.
300mm max.
Offset Butt Joints in

consecutive layers
by 300mm min.
Nail fix butt

joints at 200mm
max. centres
200mm max.
Apply External
Angle Bead to all
corners and set
The Red Book
200mm
max.
C31
Fig C2: iNsTALLATioN dETAiL gYPRoCK PLAsTERBoARd

TimBER sTud hoRiZoNTAL shEETiNg AdhEsiVE/FAsTENER FixiNg
For additional information, refer to GYP547, Gyprock Residential Installation Guide
NoN-FiRE RATEd
Form butt joints on or

between studs as required by
level of finish (back-block butt
joints formed between studs)
Stagger butt joints on
adjacent sheets and on
opposite sides of wall by
one stud space minimum
200mm
min. from fastener
Nails 150mm max.
Screws 200mm max.
300mm
max.
Stagger fasteners at butt

joints
300mm
max.
200mm
min. from
fastener
CSR Gyprock Acrylic
Stud Adhesive
Fixing specifications
Nails,
Screws &
Adhesive
Refer to Section A
Location
Fixing & spacing
Field
Sheet
Width
900mm
1200mm
1350mm
Adhesive Daubs at
300mm max. centres
and 200mm min. from
fastener points
Adhesive
Daubs across board
3 daubs
4 daubs
5 daubs
Recessed
Edges
Nail or screw
at each stud
Butt
Joints on
studs
Nails at 150mm max. or

Screws at 200mm max.
Corners &
Openings
Nails or screws at
300mm max. centres
SUITABLE FOR:
300mm
max.

Plasterboard to each side
of wall
CSR Bradford Insulation
where applicable
Refer to Section Z for
perimeter details
Fasteners at 10 to 16mm
from sheet edges
Fig C3: iNsTALLATioN dETAiL gYPRoCK PLAsTERBoARd

TimBER sTud hoRiZoNTAL shEETiNg FAsTENER FixiNg
Form butt joints on or

between studs as required by
level of finish (back-block butt
joints formed between studs)
Stagger butt joints on
one stud space minimum
NoN-FiRE RATEd
Double Nails
50mm apart
at 300mm
max.
centres
OR
Screws
at
400mm
max.
centres
300mm
max.

Plasterboard to each side of wall
Nails or
Screws
Refer to Section A
Location
Fixing & spacing
Field
2 Nails 50mm apart at

300mm max. centres
or
1 screw at 400mm
max. centres
Recessed
Edges
1 Nail or 1 Screw
at each stud
Butt
Joints on
studs
Nails at 150mm max. or

Butt joints
between
studs
Back-block and fix with

adhesive only
Corners &
Openings
Nails or screws at
300mm max. centres
SUITABLE FOR:

where applicable

perimeter details
C32
from sheet edges
The Red Book
Fig C4: iNsTALLATioN dETAiL gYPRoCK FYRChEK siNgLE LAYER

TimBER sTud hoRiZoNTAL FAsTENER FixiNg
Nails at 150mm max.

to each side of wall
Nails at 150mm max.

FiRE RATEd
Fixing specifications for
horizontal sheeting
Fasteners
Refer to Section A
Location
Fixing & spacing
Field

300mm max. centres
or
1 Screw at
300mm max. centres
Recessed
Edges
Fasten at each stud
Butt
Joints
Nails at
150mm max. centres
or
Screws at
200mm max. centres.
Corners,
Openings,
Top &
Bottom
Nails at
150mm max. centres
or
Screws at
300mm max. centres
Where horizontal joints are

not backed by noggings,
stagger all horizontal joints
300mm minimum
300mm min.
300mm
max.
2 Nails
50mm
apart or
1 Screw

centres
SUITABLE FOR:

where applicable
adjacent sheets one stud
minimum
Nails at 150mm max.


perimeter details
from sheet edges
Fig C5: iNsTALLATioN dETAiL gYPRoCK FYRChEK siNgLE LAYER

TimBER sTud VERTiCAL shEETiNg FAsTENER FixiNg
Nails at 150mm max.
FiRE RATEd
Nails at 150mm max.
300mm
max.
2 Nails
50mm
apart or
1 Screw

centres
where applicable
300mm
max.

Vertical sheeting
Fasteners
Refer to Section A
Location
Fixing & spacing
Field
2 Nails 50mm apart

or 1 Screw at 300mm
max. centres
Recessed
Edges
Nails or Screws at
300mm max. centres
Butt
Joints on
noggings
Nails at
150mm max. centres
or
Screws at
200mm max. centres
Corners,
Openings,
Top &
Bottom
Nails at
150mm max. centres
or
Screws at
300mm max. centres
SUITABLE FOR:

perimeter details
from sheet edges
The Red Book
C33
Fig C6: iNsTALLATioN dETAiL gYPRoCK FYRChEK TWo LAYER

Stagger fasteners
at butt joints
FiRE RATEd
Nails at 150mm max.

1st and 2nd layer
Nails at 150mm max.

300mm
max.

centres
300mm min.
One or two layers of

GYPROCK FYRCHEK
of wall
2 Nails
50mm
apart or
1 Screw
Fasteners
Refer to Section A
1st Layer
Fixing & spacing
Edges &
Field
Nails or Screws at
600mm max. centres
2nd Layer Fixing & spacing

Field

300mm max. centres
or
1 Screw at
300mm max. centres
Recessed
Edges
Fasten at each stud
Butt
Joints
Nails at
150mm max. centres
or
Screws at
200mm max. centres.
Corners &
Openings
Nails at
150mm max. centres
or
Screws at
300mm max. centres
NOTE:
Second layer butt joints may
be formed between studs with
laminating screws at 200mm max.
centres each side of joint.
600mm
max.

where applicable
Nails at 150mm max.

adjacent sheets and
between 1st and 2nd
layers by one stud
minimum
SUITABLE FOR:

perimeter details
from sheet edges
Fig C7: iNsTALLATioN dETAiL TimBER sTud WiTh REsiLiENT mouNTEd FuRRiNg ChANNEL
gYPRoCK FYRChEK TWo LAYER hoRiZoNTAL shEETiNg sCREW FixiNg
Rondo Track or Angle
fixed to ceiling frame
FiRE RATEd
Rondo Furring Channel at

One or two layers of

GYPROCK FYRCHEK
of wall
300mm
max.

1st and 2nd layer
300mm min.
600mm
max.
Stagger butt joints by

one stud minimum
300mm
max.

where applicable

perimeter details
Refer to Section A
1st Layer
Fixing & spacing
Edges &
Field

centres
CSR Gyprock Resilient

Mounts to each stud at
1200mm max. from tracks
and 1200mm max. centres

centres
Fasteners
Field

centres
Recessed
Edges
Screw at each stud
Butt
Joints
Screws at
200mm max. centres
Corners &
Openings
Screws at
300mm max. centres
NOTE:
Single layer systems are fixed to the
same specifications as detailed for
the 2nd layer.
Second layer butt joints may
be formed between studs with
laminating screws at 200mm max.
centres each side of joint.
200mm
max.
SUITABLE FOR:
Rondo Track or
Angle fixed to floor
C34
from sheet edges
The Red Book
Fig C8: iNsTALLATioN dETAiL gYPRoCK FYRChEK ThREE LAYER

TimBER sTud hoRiZoNTAL oR VERTiCAL shEETiNg FAsTENER FixiNg
FiRE RATEd
Vertical sheeting (shown)
600mm
600mm
Fasteners
Nails or Screws
Refer to Section A
1st Layer
Fixing & spacing
Recessed
Edges,
Field,
Corners &
Openings
Screws or Nails at
600mm max. centres
on studs
300mm
300mm
Recessed
Edges
Screws or Nails at
300mm max. centres
on studs
Field
1 Screw or 2 Nails at
300mm max. centres
on studs
Butt Joints Laminating Screws at

200mm max. centres
Corners &
Openings

centres
400mm
Offset all joints 300mm

min. from previous layer
400mm

centres
or
Nails at 150mm max.
centres
3rd Layer
Fixing & spacing
Recessed
Edges,
Field,
Corners &
Openings
400x400mm max. grid
Butt Joints Laminating screws at

200mm max. centres
400mm
perimeter details
FiRE RATEd
horizontal sheeting
SUITABLE FOR:
Fasteners
Nails or Screws
Refer to Section A
1st Layer
Fixing & spacing
Recessed
Edges,
Field,
Corners &
Openings
Screws or Nails at
600mm max. centres
on studs

Recessed
Edges
Screws or Nails at
600mm max. centres
on studs
Field
1 Screw or 2 Nails at
300mm max. centres
on studs
Butt Joints Laminating Screws at

200mm max. centres
Corners &
Openings

centres
or
Nails at 150mm max.
centres
3rd Layer
Fixing & spacing
Recessed
Edges,
Field,
Corners &
Openings
400x400mm max. grid

200mm max. centres
The Red Book
C35
Fig C9: iNsTALLATioN dETAiL CEmiNsEAl WALLBoARd

TimBER sTud hoRiZoNTAL shEETiNg AdhEsiVE/FAsTENER FixiNg
For additional information, refer to FC101, Cemintel Wet Area Systems guide
until adhesive sets
NoN-FiRE RATEd

one stud minimum
200mm
max.
200mm
max.
200mm
max.

Nails &
Adhesive
Refer to Section A
Location
Fixing & spacing
Field
Adhesive Daubs at
230mm max. centres
and 200mm min. from
fastener points
3 daubs
4 daubs
5 daubs
Sheet
Width
900mm
1200mm
1350mm
Top &
Bottom
Plates
Nails at 200mm
maximum centres
Recessed
Edges
Nails at
each stud
Butt
Joints
Nails at
200mm max. centres.
Corners &
Openings
Nails at
200mm max. centres

centres
SUITABLE FOR:
One layer of CSR Fibre

Cement Wallboard to
each side of wall
230mm
max.

where applicable
200mm
min.

perimeter details
Fasteners at 12mm min.

from sheet edges and
50mm min. from sheet
corners
Fig C10: iNsTALLATioN dETAiL gYPRoCK FYRChEK + CEmiNsEAL WALLBoARd

For additional information, refer to FC101, Cemintel Wet Area Systems guide
FiRE RATEd
centres
200mm
max.

1st and 2nd layer
300mm
max.
Fasten GYPROCK
at 600mm maximum
centres and 10 to 16mm
from sheet edges
where applicable
and one layer of CSR
Fibre Cement Wallboard
Refer to Section A
1st Layer
Fixing & spacing
Edges &
Field
Nails or Screws at
600mm max. centres

Field
Nails at 300mm max.

centres
For tiled areas Nails
at 200mm max. centres
Top &
Bottom
Plates
Nails at
200mm max. centres
Recessed
Edges
Nails at
each stud
Butt
Joints
Nails at
200mm max. centres
Corners &
Openings
Nails at
200mm max. centres
200mm
max.
600mm max.
300mm min.

adjacent sheets and
between 1st and 2nd layer
by one stud minimum
Fasteners
SUITABLE FOR:
200mm
max.

perimeter details
from sheet corners
C36
The Red Book
Fig C11: iNsTALLATioN dETAiL. CsR CEmiNsEAL TExTuRE BAsE shEET

ExTERNAL sidE oF WALL TimBER sTud
For additional information, refer to FC122, Cemintel Texture Base Sheet & Texture Coating System guide
200mm max.
Fasteners 50mm
min. from sheet
corners

FYRCHEK MR
Plasterboard fixed to
studs
FiRE RATEd
Joint and finish outer

layer only (refer to
Jointing specification).
All joints to be formed on
framing
200mm
max.
200mm
max.
Noggings at 1350mm max

where applicable
Refer to Section A
1st Layer
Fixing & spacing
Edges &
Field
Nails or Screws at
600mm max. centres
Sarking

centres
Fasteners
Recessed
Joints,
Field,
Top &
Bottom
Plates
Nails to framing at
200mm max. centres
Corners &
Openings
Nails at
200mm max. centres
SUITABLE FOR:
600mm
max.
200mm
max.
One layer of CSR Fibre

Cement Texture Base
Sheet
Fasteners 12mm min.

from sheet edges
Fasteners 50mm min.

from sheet corners
NOTE: Fixing spacings for Cemintel Texture Base Sheet may need to be reduced to meet wind loadings. Refer to
publication NFC122, Cemintel Texture Base Sheet & Texture Coating System guide.
The Red Book
C37
Notes
C38
The Red Book
Section D
Contents
D2 D3
Introduction
D3
D3 D4
Installation
D5
Components
D5
System Specifications
Stud One Side
D6 D8
Stud Both Sides
D9 D11
Stud and Furring Channel
D12 D13
Resilient Mount/Furring Channel
D14 D15
CSR Hebel Systems
D16 D18
FRL Upgrade
D19 D20
Concrete Column Encasement
D21
The Red Book
D22 D23
D1

Table D1 and D5 provide stud selection information suitable for Gyprock non-fire rated and fire rated non-loadbearing internal
wall systems that are to be designed for a Uniform Distributed Load (UDL) of 0.25kPa.
Table D2 provides stud selection information suitable for specialised fire rated non-loadbearing wall systems that are required
to be designed for a UDL of 0.35kPa. Refer to Rondo for other design pressures and for loadbearing walls.
TABLE D1: mAximum WALL hEighT WiTh RONDO LiPPED STEEL STuDS NON-LOADBEARiNg WALLS
WALLS gENERALLy (LOAD uDL = 0.25kPa)
Stud Size
Wall Frame and
BMT
51
0.5
64
0.75
0.5
0.75
76
1.15
Linings (mm)
600mm max. cts
0.55
0.75
92
1.15
150
0.55
0.75
1.15
0.75
1.15
10
2.32
2.60
2.72
3.13
3.53
3.20
3.58
4.05
3.61
4.13
4.69
5.33
6.81
13
2.32
2.60
2.72
3.25
3.58
3.24
3.82
4.05
3.61
4.18
4.69
5.37
6.81
16
2.32
2.60
2.75
3.28
3.59
3.25
3.87
4.05
3.61
4.20
4.69
5.37
6.81
TABLE D2: mAximum WALL hEighT WiTh RONDO LiPPED STEEL STuDS NON-LOADBEARiNg WALLS
WALLS Of ShAfTS AND fiRE iSOLATED ExiTS (LOAD uDL = 0.35kPa)
Stud Size
Wall Frame and
51
BMT
0.5
64
0.75
0.5
0.75
76
1.15
Linings (mm)
600mm max. cts
0.55
0.75
92
1.15
150
0.55
0.75
1.15
0.75
1.15
10
2.07
2.34
2.34
2.80
3.15
2.76
3.20
3.62
3.06
3.70
3.81
3.81
3.81
13
2.07
2.34
2.34
2.80
3.17
2.76
3.37
3.62
3.06
3.70
4.20
4.83
5.53
16
2.07
2.34
2.34
2.90
3.18
2.76
3.41
3.62
3.06
3.70
4.20
4.83
5.53
NOTES:
Deflection Limit is span/240 to a maximum of 30mm, in accordance with BCA Specification C1.8.
Tabulated heights do not include axial loads (except self weight) or shelf loading.
Loadings: Table D1 Pultimate = 0.375 kPa, Pservice = 0.25 kPa.
Loadings: Table D2 Pultimate = 0.525 kPa, Pservice = 0.35 kPa.
Walls are not for external applications.
All loadings in accordance with AS1170:2002.
Walls analysed in accordance with AS4600:1996.
Noggings in accordance with Table D3.
Tables have been prepared by Rondo Building Services Pty Ltd.
TABLE D3: NOggiNgS fOR STEEL fRAmiNg

Lined One Side*
Wall Height (m)
Number of Noggings
(equally spaced)
0.0 - 3.0
3.0 - 6.0
6.0 - 8.0
NOTES: * Plus noggings at head. Refer to details.
D2
TABLE D4. mAximum SPAciNg Of WALL SuPPORT

cLiPS fOR fuRRiNg chANNELS.
(LOAD uDL = 0.35kPa)
Rondo Furring Channel Part N
Maximum Spacing of Clips (mm)
308 (16mm)
900
129 (28mm)
NOTES: Support clips include
direct fixing clips.
1200
Gyprock
Resilient Mounts and Rondo
The Red Book
TABLE D5: mAximum TimBER STuD hEighT

NON-LOADBEARiNg WALLS ShEETED WiTh gyPROcK PLASTERBOARD OR cEmiNSEAL WALLBOARD
uNifORm DiSTRiBuTED LOAD (uDL) = 0.25kPa
Wall Frame
Timber Grade
and Sheeting
Stud Thickness (mm)
Configuration
Stud Depth (mm)
600mm cts.
F5
35
F8
45
35
F11
45
35
MGP 10
45
35
45
MGP 12
MGP 15
35
45
35
45
70
2.7
2.9
2.9
3.2
3.1
3.3
3.0
3.3
3.3
3.6
3.5
3.8
90
3.4
3.7
3.8
4.1
4.0
4.3
3.9
4.2
4.2
4.6
4.5
4.9
120
4.6
5.0
5.0
5.5
5.3
5.8
5.2
5.7
5.6
6.0
6.0
6.0
NOTES:
Stud heights have been determined based on a maximum deflection of H240 or 30mm maximum.
Noggings at 1350mm maximum centres, measured vertically.
Introduction
Gyprock plasterboard and CeminSeal Wallboard can
be used with masonry walls for effective fire and acoustic
solutions. These linings can eliminate the need for render,
increase the fire rating of the masonry, or provide an acoustic
performance to meet sound transmission and sound impact
ratings.
Systems incorporating masonry and an insulated cavity are
generally used where there is a requirement for excellent
acoustic performance and discontinuous construction. The
provision of a cavity also allows the inclusion of services.
Gyprock plasterboard may be directly applied to the
masonry substrate, screw fixed to metal furring channels
that are fixed to the masonry, or may be fixed to separate
stud framing. CeminSeal Wallboard may be fixed to furring
channels or studs.
Systems in this section are suitable for a wide range of
masonry products. These are typically clay and concrete
blocks, autoclaved aerated concrete blocks and panels, and
may include cast concrete elements. Minimum performance
conditions apply to the substrates to achieve the system
performance values, and these are stated in the system
specifications. Specific fixing details apply to each type of
substrate.
These wall systems are generally used in internal applications
in commercial, industrial, institutional, domestic and high-rise
domestic construction, or in the renovation of older buildings.
A number of systems for external masonry veneer walls can
be found in Section B and Section C.
The Red Book
Design
Considerations
Structural Performance
All wall elements must be designed for the applied loads.
Vertical loads may be supported by the masonry element
of the wall, or for non-fire rated walls, by the stud framing.
Lateral loads should be considered separately for framed
and masonry parts of a wall. To achieve the specified sound
performance, ties from masonry to the stud framing must
not be used.
framed Wall Elements
Guidance is given in Tables D1, D2, & D5 for the selection of
Rondo studs and for timber studs in non-loadbearing internal
walls only for 0.25kPa and 0.35kPa. For other brands of
studs, studs that are required to be loadbearing, and studs
subject to higher lateral pressures, contact the manufacturer
for design information. Maximum spans for Rondo furring
channels are given in Table D4.
Tall multi-residential buildings often have exterior operable
doors and windows, resulting in internal walls being subject
to wind pressure. In these cases, walls must be designed
for the appropriate loads.
Stud frames that are part of a masonry wall system may be
loadbearing. A qualified person must complete the structural
design of loadbearing wall systems. Walls with shelving
attached are considered loadbearing.
D3
Further information on the design of stud walls is given in

Sections B and C.
Walls lined with GYPROCK plasterboard designed as
loadbearing, and non-loadbearing walls selected from Tables
D1, D2 and D5, meet the requirements of BCA Specification
C1.8 Clause 3.4 Walls generally.
masonry Wall Elements
All brick and block wall elements are to be designed in
accordance with AS3700 Masonry Structures. Concrete
walls must be designed to AS3600: Concrete Structures, and
CSR Hebel Powerpanel must be designed in accordance
with CSR Hebel literature.
fire Resistance
For systems without a stated Fire Resistance Level (FRL),
the system FRL is equal to the FRL of the masonry wall
element. The FRL of masonry walls is dependant on the
height and width of the wall; contact the manufacturer for
more information.
To achieve the required fire performance of a wall, it is
essential that installation is in accordance with the masonry
manufacturers details and relevant installation standards. This
should include fire sealing at the wall head and perimeters,
and filling of mortar joints. All gaps and penetrations should
be effectively fire sealed.
movement and may not be suitable for use as a general
purpose fire rated caulking. Its use is specified in some wall/
ceiling junctions. Refer to the Gyprock Ceiling Systems
Installation Guide, NGYP570.
In systems with Gyprock Fyrchek plasterboard fixed to
furring channels, fixing, jointing and fire sealing must be
in accordance with Section B of this manual. FYRCHEK
plasterboard must be fully screw fixed, and Gyprock Acrylic
Stud Adhesive must not be relied on.
Systems that use only resilient mounts with furring

channels to create a cavity do not meet the requirements
of discontinuous construction, although may be used in the
Northern Territory where an impact rating is required. The
installation of services in these systems is not recommended
as they can bridge the gap between the masonry and the
linings.
The acoustic performance of wall systems may be affected
by:
Sound flanking.
The effectiveness of workmanship and caulking.
The presence and treatment of penetrations.
The inclusion of structural elements and bridging items
such as ties.
Reducing the stated or implied cavity sizes.
The acoustic performance of wall systems will not be reduced
by:
The addition of Gyprock plasterboard or Cemintel
linings.
The use of deeper studs or larger cavities.
The use of timber studs of at least equal depth in lieu of
steel studs.
Omitting the lining direct fixed to masonry (except in Hebel
systems).
Refer to Section A for detailed acoustic information.
Perimeter Sealing
To attain the stated R w in systems that do not rely on
plasterboard for the fire rating, use Gyprock Wet Area
Acrylic Sealant, Gyprock Fire Mastic or other tested
acoustic rated material of equivalent or better performance.
The acoustic performance of some systems is dependant
on a minimum Rw of the masonry wall element. This is to
be the tested performance of the masonry without render
or sheet linings, and must be verified by the masonry unit
manufacturer.
Installation of the masonry element of the wall must be in
accordance with the manufacturers details for the tested
product.
Systems that meet the BCA requirements for discontinuous
construction are noted in the system specifications. These
have studs that are separated from the masonry by at least
12mm. The plasterboard lining on the studs (the wall leaf)
therefore has a separation of at least 12mm plus the depth
of the stud, which exceeds the BCA minimum of 20mm.
Ties between masonry and stud framing must not be used.
D4
The Red Book
Installation
masonry
For masonry with any direct fixed lining or lining fixed to

furring channels:
At control joints in masonry (Refer to masonry
manufacturer.)
All brick and block walls are to be installed in accordance

with AS3700 Masonry Structures. CSR Hebel Powerpanel
must be installed in accordance with CSR Hebel literature.
At 12m maximum centres.
framing
Non-tiled internal walls with fibre cement outer layer: at

7.2m maximum centres.
For detailed information on wall junctions, intersections,

frame attachments and penetrations, refer to relevant
installation manuals.
At change of substrate material.

For stud framed wall elements:
Tiled internal walls with fibre cement outer layer: at 4.2m

maximum centres.
Manual NGYP544, Gyprock Steel Frame Wall Systems

Installation Guide has detailed information on the installation
of steel stud framing.
Walls with plasterboard outer layer: at 12m maximum

centres.
Wallboard & Plasterboard fixing
At changes of lining material.
Walls may be built to achieve a particular Level of Finish

can have requirements for frame alignment, jointing, back
blocking methods and sheet orientation. CeminSeal
Wallboard and Gyprock plasterboard may be installed
vertically or horizontally, although for some Levels of Finish
horizontal sheeting must be used.
At junctions with other wall elements.
Components
Lining & fixing materials
Refer to Section A of this manual for detailed information
on Gyprock and Cemintel lining products, masonry
adhesive, and for fastener specifications for fixing GYPROCK
plasterboard to steel studs and furring channel.
Except for fire grade plasterboard, fixing to framing may be

fastener only or combination fastener/adhesive. Plasterboard
fixed direct to masonry may be adhesive daub fixed, full bed
adhesive fixed, or mechanically fixed. A nominal 5mm has
been allowed for adhesive thickness.
Gyprock Masonry Adhesive is a fast and convenient

method of fixing GYPROCK plasterboard systems to
masonry substrates. Gyprock Acrylic Stud Adhesive is
used for fixing non-fire grade linings to framing.
Jointing & finishing
framing


Building Services Pty Ltd, telephone 1300 367 663.

the outer layer.
It is recommended that a water resistant taping
compound, such as Gyprock Wet Area Base Coat be
used at horizontal and vertical joints within wet areas such
as showers.
control Joints
the masonry and any direct fixed lining, and through framed
wall elements.
Fixing clips include CSR Resilient Mount, Rondo direct fixing

clips N237, Beta-Fix and STSC clips. Furring channels part
N308 or N129 are to be fitted into wall track part N142 or
N140 respectively at top and bottom.
masonry
For systems in this section, masonry may include clay or
concrete blocks, autoclaved aerated concrete blocks and
panels, and reinforced concrete. Brick and block substrates
shall comply with AS3700.

the building, and at the following locations:
The Red Book
D5
masonry Wall Systems - Stud One Side

SySTEm SPEcificATiON
AcOuSTic
OPiNiON
TyPicAL LAyOuT (cSR 760 shown)
PKA-053
Discontinuous
Construction
Lining as per table, fixed to studs.

Steel stud framing, as per table, at 600mm max. centres.
Cavity infill as per table.
12mm minimum cavity between masonry and framing.
Single Brick, Block or Concrete wall with Rw as stated.
Plasterboard as per system table, direct fixed to masonry.
masonry
Wall
Requirements
SySTEm
N
cSR 737
STuD DEPTh (mm)

WALL LiNiNgS
56/46
57/47
1 x 13mm GYPROCK
plasterboard CD
57/47
58/48
55/45
56/46
100
128
56/48
58/50
1 x 13mm GYPROCK
plasterboard CD
57/49
59/51
55/47
57/49
107
135
1 x 13mm GYPROCK
plasterboard CD.
Refer to Masonry
Wall Manufacturer
for FRL Details
58/50
59/52
1 x 13mm GYPROCK
plasterboard CD
59/51
60/53
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
57/49
58/51
107
135
Masonry side
61/54
62/55
1 x 13mm GYPROCK
plasterboard CD
62/55
63/56
60/53
61/54
120
148
stud side
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
D6
ADDITIONAL WALL THICKNESS mm
Masonry side
stud side
cSR 762
Masonry side
stud side
cSR 761
Rw / Rw+ctr
1 x 6mm CeminSeal
Wallboard.
Tested
Brick,
Block or
concrete
Wall with Rw
> 41
92
Masonry side
stud side
cSR 760
cAViTy iNfiLL (Refer to Section A)
64
The Red Book

AcOuSTic
OPiNiON
PKA-053
Discontinuous
Construction

masonry
Wall
Requirements
SySTEm
N
cSR 763
STuD DEPTh (mm)

WALL LiNiNgS
59/49
60/50
1 x 13mm GYPROCK
plasterboard CD
60/50
61/51
58/48
59/49
100
128
59/51
61/53
1 x 13mm GYPROCK
plasterboard CD
60/52
62/54
58/50
60/52
107
135
1 x 13mm GYPROCK
plasterboard CD.
Refer to Masonry
Wall Manufacturer
for FRL Details
61/53
62/55
1 x 13mm GYPROCK
plasterboard CD
62/54
63/56
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
60/52
61/54
107
135
Masonry side
64/57
65/58
1 x 13mm GYPROCK
plasterboard CD
65/58
66/59
63/56
64/57
120
148
stud side
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
The Red Book
Masonry side
stud side
cSR 766
Masonry side
stud side
cSR 765
Rw / Rw+ctr
1 x 6mm CeminSeal
Wallboard.
Tested
Brick,
Block or
concrete
Wall with Rw
> 44
92
Masonry side
stud side
cSR 764
64
D7

AcOuSTic
OPiNiON
PKA-053
Discontinuous
Construction

masonry
Wall
Requirements
SySTEm
N
cSR 738
STuD DEPTh (mm)

WALL LiNiNgS
61/51
62/53
1 x 13mm GYPROCK
plasterboard CD
62/52
63/54
60/50
61/52
100
128
60/51
62/54
1 x 13mm GYPROCK
plasterboard CD
61/52
63/55
59/50
61/53
104
132
1 x 10mm GYPROCK
plasterboard CD.
Refer to Masonry
Wall Manufacturer
for FRL Details
61/53
63/55
1 x 13mm GYPROCK
plasterboard CD
62/54
64/56
60/52
62/54
107
135
1 x 13mm GYPROCK
plasterboard CD.
63/55
64/57
1 x 13mm GYPROCK
plasterboard CD
64/56
65/58
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
62/54
63/56
107
135
Masonry side
66/59
67/60
1 x 13mm GYPROCK
plasterboard CD
67/60
68/61
65/58
66/59
120
148
stud side
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
D8
Masonry side
stud side
cSR 769
Masonry side
stud side
cSR 768
Masonry side
stud side
cSR 767
Rw / Rw+ctr
1 x 6mm CeminSeal
Wallboard.
Tested
Brick,
Block or
concrete
Wall with Rw
> 46
92
Masonry side
stud side
cSR 739
64
The Red Book
masonry Wall Systems - Stud Both Sides

AcOuSTic
OPiNiON
PKA-053
Discontinuous
Construction

Cavity infill, as per table.
masonry
Wall
Requirements
SySTEm
N
STuD DEPTh (mm)

WALL LiNiNgS
cAViTy iNfiLL (both sides)

cSR 774
61/46
Both sides
61/46
62/47
1 x 6mm CeminSeal
Wallboard.
58/43
59/44
164
220
59/45
60/47
Both sides
60/46
61/48
1 x 10mm GYPROCK
plasterboard CD.
57/43
58/45
172
228
60/47
62/49
Both sides
61/48
63/50
1 x 13mm GYPROCK
plasterboard CD.
58/45
60/47
178
234
62/49
63/50
63/50
64/51
60/47
61/48
178
234
cSR 780
cSR 781
Both sides
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
The Red Book
Rw / Rw+ctr
60/45
cSR 775
Refer to Masonry
Wall Manufacturer
for FRL Details
92
Tested
Brick,
Block or
concrete
Wall with Rw
> 41
64
D9

AcOuSTic
OPiNiON
PKA-053
Discontinuous
Construction

masonry
Wall
Requirements
SySTEm
N
STuD DEPTh (mm)

WALL LiNiNgS

cSR 776
63/48
Both sides
63/48
64/49
1 x 6mm CeminSeal
Wallboard.
60/45
61/46
164
220
62/48
63/50
Both sides
63/49
64/51
1 x 10mm GYPROCK
plasterboard CD.
60/46
61/48
172
228
63/50
64/51
Both sides
64/51
65/52
1 x 13mm GYPROCK
plasterboard CD.
61/48
62/49
178
234
64/51
66/53
65/52
67/54
62/49
64/51
178
234
cSR 783
cSR 784
Both sides
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
D10
Rw / Rw+ctr
62/47
cSR 777
Refer to Masonry
Wall Manufacturer
for FRL Details
92
Tested
Brick,
Block or
concrete
Wall with Rw
> 44
64
The Red Book

AcOuSTic
OPiNiON
PKA-053
Discontinuous
Construction

masonry
Wall
Requirements
SySTEm
N
STuD DEPTh (mm)

WALL LiNiNgS

cSR 778
66/51
Both sides
66/51
67/52
1 x 6mm CeminSeal
Wallboard.
63/48
64/49
164
220
64/50
66/53
Both sides
65/51
67/54
1 x 10mm GYPROCK
plasterboard CD.
62/48
64/51
172
228
65/52
67/54
Both sides
66/53
68/55
1 x 13mm GYPROCK
plasterboard CD.
63/50
65/52
178
234
67/54
68/55
68/55
69/56
65/52
66/53
178
234
cSR 787
cSR 788
Both sides
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
The Red Book
Rw / Rw+ctr
65/50
cSR 779
Refer to Masonry
Wall Manufacturer
for FRL Details
92
Tested
Brick,
Block or
concrete
Wall with Rw
> 46
64
D11
masonry Wall Systems - Stud and furring channel

AcOuSTic
OPiNiON
PKA-053
Discontinuous
Construction

28mm furring channel, fixed to masonry with 40mm
cavity.
Furring cavity infill, as per table.
Lining as per table, fixed to furring.
masonry
Wall
Requirements
STuD DEPTh (mm)

SySTEm
N
WALL LiNiNgS
cSR 540
Both sides
Tested
Brick,
Block or
concrete
Wall with
Rw > 41
1 x 13mm
GYPROCK
plasterboard CD.
cSR 541
57/45
59/47
58/46
60/48
(c) TBL1025
55/43
57/45
142
170
59/47
60/49
60/48
61/50
(c) TBL1025
57/45
58/47
142
170
Both sides
1 x 13mm
GYPROCK
SOUNDCHEK
plasterboard.
cSR 542
Both sides
1 x 13mm
GYPROCK
plasterboard CD.
60/48
62/50
62/50
64/52
(c) TBL1025
58/46
60/48
142
170
Refer to
Masonry Wall
Manufacturer
for FRL Details
cSR 543
62/50
63/52
63/51
64/53
(c) TBL1025
60/48
61/50
142
170
Both sides
1 x 13mm
GYPROCK
SOUNDCHEK
plasterboard.
cSR 548
stud side
1 x 13mm
GYPROCK
plasterboard CD.
Furring side
1 x 6mm
CeminSeal
Wallboard.
D12
Rw / Rw+ctr
Tested
Brick,
Block or
concrete
Wall with
Rw > 44
92
STuD cAViTy iNfiLL
Refer to
Masonry Wall
Manufacturer
for FRL Details
64
fuRRiNg cAViTy
iNfiLL
60/48
62/50
62/50
64/52
(c) TBL1025
58/46
60/48
135
163
The Red Book
masonry Wall Systems - Stud and furring channel

AcOuSTic
OPiNiON
PKA-053
Discontinuous
Construction

28mm furring channel, fixed to masonry with 40mm
cavity.
Furring cavity infill, as per table.
Lining as per table, fixed to furring.
masonry
Wall
Requirements
STuD DEPTh (mm)

SySTEm
N
WALL LiNiNgS
cSR 549
Both sides
1 x 10mm
GYPROCK
plasterboard CD.
Both sides
Tested
Brick,
Block or
concrete
Wall with
Rw > 46
1 x 13mm
GYPROCK
plasterboard CD.
61/48
63/51
63/50
65/53
(c) TBL1025
59/46
61/49
136
164
62/50
64/52
63/51
65/53
(c) TBL1025
60/48
62/50
142
170
64/52
65/54
65/53
66/55
(c) TBL1025
62/50
63/52
142
170
Both sides
Refer to
Masonry Wall
Manufacturer
for FRL Details
1 x 13mm
GYPROCK
SOUNDCHEK
plasterboard.
cSR 551
stud side
1 x 13mm
GYPROCK
plasterboard CD.
Furring side
1 x 6mm
CeminSeal
Wallboard.
The Red Book
Rw / Rw+ctr
cSR 545
92
STuD cAViTy iNfiLL
cSR 544
64
fuRRiNg cAViTy
iNfiLL
62/50
64/52
63/51
65/53
(c) TBL1025
60/48
62/50
135
163
D13
masonry Wall Systems - Resilient mount/furring channel

TyPicAL LAyOuT (cSR 530/532 shown)
AcOuSTic
OPiNiON
PKA-053
NOT
Deemed
Discontinuous
Construction
Lining as per table, direct fixed to furring.

28mm furring channel at 600mm max. centres, fixed to
masonry with CSR Gyprock Resilient Mounts.
masonry
Wall
Requirements
SySTEm
N
cSR 530
WALL LiNiNgS
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
Tested
Brick,
Block or
concrete
Wall with Rw
> 41
Refer to Masonry
Wall Manufacturer
for FRL Details
cSR 531
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
cSR 526
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
1 x 9mm CeminSeal
Wallboard.
cSR 532
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
Tested
Brick,
Block or
concrete
Wall with Rw
> 44
Refer to Masonry
Wall Manufacturer
for FRL Details
cSR 533
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
cSR 527
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
1 x 9mm CeminSeal
Wallboard.
D14
Rw / Rw+ctr
55/42
(b) TSB2/ASB2 Polyester
53/40
71
58/45
56/43
84
55/42
53/40
67
58/45
56/43
71
61/48
59/46
84
58/45
56/43
67
The Red Book
masonry Wall Systems - Resilient mount/furring channel

AcOuSTic
OPiNiON
PKA-053
NOT
Deemed
Discontinuous
Construction
Lining as per table, direct fixed to furring.

28mm furring channel at 600mm max. centres, fixed to
masonry with CSR Gyprock Resilient Mounts.
masonry
Wall
Requirements
SySTEm
N
cSR 534
WALL LiNiNgS
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
Tested
Brick,
Block or
concrete
Wall with Rw
> 46
Refer to Masonry
Wall Manufacturer
for FRL Details
cSR 535
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
2 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
cSR 528
Masonry side
1 x 13mm GYPROCK
plasterboard CD
Furring side
1 x 9mm CeminSeal
Wallboard.
The Red Book
Rw / Rw+ctr
60/47
58/45
71
63/50
61/48
84
60/47
58/45
67
D15
masonry Wall Systems - cSR hebel Powerpanel

TyPicAL LAyOuT (hEBEL 1030/1031 shown)
AcOuSTic
TEST
OR
OPiNiON
ATf-1023
Discontinuous
Construction
Plasterboard as per table, fixed to panels.

75mm CSR Hebel Powerpanel.
30mm minimum gap with cavity infill, as per table.
75mm Hebel Powerpanel.
Plasterboard as per table, fixed to panels.
fRL
Report/Opinion
SySTEm
N
WALL LiNiNgS
cAViTy iNfiLL
Rw / Rw+ctr
hEBEL 1030/1031
up to
/240/240
Both sides
64/59
1 x 10mm GYPROCK
plasterboard CD.
FCO 2073
WALL THICKNESS mm
200
AcOuSTic
TEST
OR
OPiNiON
2010861.1/
0505A/
R2/Vf
Plasterboard as per table, fixed to studs.

64mm steel studs at 600mm max. centres.
Discontinuous
Construction

35mm minimum gap.
75mm CSR Hebel Powerpanel.
Plasterboard as per table, fixed to panel.
fRL
Report/Opinion
SySTEm
N
WALL LiNiNgS
Rw / Rw+ctr
hEBEL 1000/1001
up to
/180/180
FCO 2073
Both sides
1 x 13mm GYPROCK
WALL THICKNESS mm
D16
62/54
200
The Red Book
masonry Wall Systems - cSR hebel Powerpanel

AcOuSTic
TEST
OR
OPiNiON
2010861.1/
0505A/
R2/Vf
Plasterboard as per table, fixed to furring.

Rondo N129 furring channel at 600mm max. centres
with 50mm Glasswool Partition batts 11kg.
75mm CSR Hebel Powerpanel
Discontinuous
Construction
35mm minimum gap.

64mm steel studs at 600mm max. centres with 50mm
Glasswool Partition batts 11kg.
Plasterboard as per table, fixed to studs.
fRL
Report/Opinion
SySTEm
N
WALL LiNiNgS
Rw / Rw+ctr
hEBEL 1006/1007
up to
/180/180
Both sides
(a) Insulation as per system specification
62/51
1 x 13mm GYPROCK
FCO 2073
WALL THICKNESS mm
228
AcOuSTic
TEST
OR
OPiNiON

2010861.1/
0505A/
R2/Vf

Discontinuous
Construction
30mm minimum gap with 50mm Glasswool Partition

batts 11kg.
fRL
Report/Opinion
SySTEm
N
WALL LiNiNgS
cAViTy iNfiLL
Rw / Rw+ctr
hEBEL 1032/1033
up to
/240/240
FCO 2073
Both sides
(a) Insulation as per system specification
1 x 10mm GYPROCK
plasterboard CD.
WALL THICKNESS mm
The Red Book
64/59
256
D17
cSR hebel Low-Rise multi-Residential intertenancy Party Walls

AcOuSTic
OPiNiON
TyPicAL LAyOuT (hEBEL 1302)
PKA-A073
Timber studs at 450mm max. centres (10mm GYPROCK

plasterboard CD) or 600mm max. centres.
Discontinuous
Construction

10-20mm minimum cavity between Powerpanel and
framing.
75mm thick Hebel Powerpanel.
10-20mm minimum cavity between Powerpanel and
framing.
Timber studs at 450mm max. centres (10mm GYPROCK
plasterboard CD) or 600mm max. centres.
fRL
Report/Opinion
SySTEm
N
STuD DEPTh (mm)

WALL LiNiNgS

hEBEL 1302
Both sides
1 x 10mm GYPROCK
plasterboard CD.
Both sides
1 x 13mm GYPROCK
plasterboard CD.
Both sides
/90/90
90/90/90
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
WFRA 45771-3
49/38
(b) 90 Gold Batts 2.0 both sides
61/48
63/51
(c) TSB4 Polyester both sides
56/43
(d) TSB5 Polyester both sides
59/47
255
295
(a) Nil
49/38
50/39
63/51
64/52
58/46
60/48
261
301
(a) Nil
52/41
53/42
66/54
67/56
61/49
63/52
261
301
(a) Nil
48/37
50/39
62/49
63/51
57/44
59/47
255
295
(a) Nil
50/39
51/40
65/52
66/55
60/47
62/51
253
293
hEBEL 1305
Both sides
1 x 10mm GYPROCK
AQUACHEK
plasterboard.
hEBEL 1306
Both sides
1 x 9mm CeminSeal
Wallboard.
D18
Rw / Rw+ctr
47/36
hEBEL 1304
90
(a) Nil
hEBEL 1303
70
The Red Book
masonry Wall Systems - fRL upgrade

AcOuSTic
TEST
OR
OPiNiON
N/A
Plasterboard lining as per table, fixed to furring channels.

Rondo furring channels or studs at 600mm maximum
centres.
Masonry wall with FRL X/Y/Z.
Rondo furring channel or studs at 600mm maximum
centres.
fRL
Report/Opinion
SySTEm
N
WALL LiNiNgS
ADDiTiONAL fRL
cSR 730
Both sides
1 x 16mm GYPROCK
X+30 / Y+60 / Z+60
cSR 731
masonry
Wall
Both sides
2 x 13mm GYPROCK
x/y/Z
X+60 / Y+120 / Z+120
FCO 382
cSR 732
Both sides
2 x 16mm GYPROCK
The Red Book
X+90 / Y+180 / Z+180
D19
masonry Wall Systems - fRL upgrade

AcOuSTic
TEST
OR
OPiNiON
N/A

Rondo furring channels or studs at 600mm maximum
centres.
Masonry wall with FRL X/Y/Z.
fRL
Report/Opinion
SySTEm
N
WALL LiNiNgS
ADDiTiONAL fRL
Lining on fire side
Lining on non-fire side
X+30 / Y+30 / Z+30
X+0 / Y+20 / Z+30
X+60 / Y+60 / Z+60
X+0 / Y+40 / Z+60
X+90 / Y+90 / Z+90
X+0 / Y+60 / Z+90
cSR 722
one side
1 x 16mm GYPROCK
cSR 723
masonry
Wall
one side
2 x 13mm GYPROCK
x/y/Z
FCO 382
cSR 724
one side
2 x 16mm GYPROCK
D20
The Red Book
concrete column Encasement Systems

Reinforced concrete column with FRL X/-/-.
fig D2: cONcRETE cOLumN ENcASEmENT SySTEm

fiRE RATED PLASTERBOARD fixED TO fuRRiNg
Plasterboard lining as per table fixed direct to column.

OR
Rondo furring channel at 600mm maximum centres with
plasterboard lining as per table fixed to Rondo furring
channel.
fRL
SySTEm
N
FCO 1356
Fix External Angle

Bead and set all
external angles
PLASTERBOARD
LiNiNg
Steel reinforced
concrete column
cSR 795
1 x 16mm
GYPROCK
FYRCHEK
plasterboard.
x+30/ /
cSR 796
2 x 13mm
GYPROCK
FYRCHEK
plasterboard.
x+60/ /
2 x 16mm
GYPROCK
FYRCHEK
plasterboard.
cSR 798
1 x 25mm
GYPROCK
SHAFT LINER
PANEL.
x+120/ /

fiRE RATED PLASTERBOARD DiREcT fixED
Fix External Angle
Bead and set all
external angles
Steel reinforced
concrete column
Furring Channel
N308 or Centre
Fix Batten N333
at 600mm max.
centres
50mm
600mm max.
max.
Anchor Clip N237 fixed with metal fasteners at 100mm max.
from each end and 1200mm max. centres along column

fiRE RATED PLASTERBOARD fixED TO fuRRiNg
cSR 797
x+120/ /
GYPROCK
FYRCHEK
plasterboard fixed
at 200mm
maximum centres
to all framing
Direct fasten
each layer of
GYPROCK
FYRCHEK
plasterboard with
Tapcon 10g
screws (or
equivalent) at 400
x 400mm max.
horizontal and
vertical centres
Track cut and fixed to

furring channels at top
and bottom of column
GYPROCK FYRCHEK fixed

to furring channel at 200mm
max. centres
Anchor Clips
N237 at
1200mm
maximum
vertical centres
and N308
Furring
Channel at
600mm
maximum
horizontal
centres or
Centre Fix
Batten N333
directly fixed at
600mm
maximum
horizontal
centres
Offset Butt
Joints in
consecutive
layers by
300mm
minimum
Fasten at
butt joints with
laminating
screws at
200mm max
centres
Screw fix each layer

at 200mm
maximum centres
to steel framing
200mm max.
Apply
External
Angle
Bead to
all
corners
and set
Note: Butt joints in single layer systems to be
backed by furring channel or nogging
75mm
max.
400mm max.
The Red Book
D21
fig D4: iNSTALLATiON DETAiL mASONRy WALL (ExcEPT AAc) VERTicAL ShEETiNg ADhESiVE fixiNg
Adhesive daubs
50mm max.
from sheet
edge
Adhesive daubs
at 230mm max.
centres
Adhesive daubs
100mm max from
top edge of sheet
Adhesive daubs
50mm max.
from sheet
edge
NON-fiRE RATED
fiRE RATED
fixing Specifications
Adhesive
Adhesive daubs
at 460mm max.
centres
Adhesive
daubs
at 460mm
max.
centres
GYPROCK
Plasterboard
Adhesive daubs
100mm max from
bottom edge of
sheet
Refer to Section A
Location
fixing & Spacing
Field
Adhesive at 460mm
max. centres
beginning 100mm
max. from top and
bottom sheet edges
and 50mm max.
from recessed sheet
edges
Butt Joints,
Corners &
Openings
Adhesive at 460mm
max. centres 50mm
max. from sheet
edges
Daubs of GYPROCK Masonry Adhesive.

6mm min. gap
fig D5: iNSTALLATiON DETAiL mASONRy WALL WiTh fuRRiNg chANNEL

hORiZONTAL ShEETiNg ScREW fixiNg
For additional information, refer to GYP544, Gyprock Steel Frame Wall Systems Installation Guide
Rondo Track or
Angle fixed to ceiling
frame
NON-fiRE RATED
fiRE RATED
One or two layers

of GYPROCK
FYRCHEK
Plasterboard to
each side of wall
300mm min.
300mm
max.
CSR Gyprock
Resilient Mounts or
Furring Anchor Clips
at 1200mm max.
from tracks and
1200mm max.
centres between
600mm
min
600mm
min
600mm
max.
300mm
max.
Rondo Furring
Channel at 600mm
maximum
horizontal centres
Caulk all perimeter
gaps with CSR
Gyprock Fire Mastic
to achieve stated fire
rated and acoustic
performance
Rondo Track or
Angle fixed to floor
D22
Screws
Refer to Section A
1st Layer
fixing & Spacing
Edges &
Field
Screws at 600mm
max. centres
2nd Layer
fixing & Spacing
Field
Screws at 300mm
max. centres
Recessed
Edges
Screw at
each furring
Butt
Joints
Screws at
200mm max. centres
Angles &
Openings
Screws at
300mm max. centres
NOTE:
Single layer systems using fire
rated or non-fire rated Gyprock
plasterboard are fixed to the same
specifications as detailed for the 2nd
layer.
200mm
max.
from sheet edges
The Red Book
fig D6: iNSTALLATiON DETAiL hEBEL AAc WALL VERTicAL ShEETiNg ScREW fixiNg
For additional information, refer to CSR Hebel Design Guide Acoustic Wall Systems
NON-fiRE RATED
fiRE RATED
10-16mm
max.
GYPROCK
Plasterboard
Fixings
50mm x 10g bugle

head screws
Location
fixing & Spacing
Field, Butt
Joints &
Edges
Screws at 600mm
max. horizontal
centres x 300mm
CSR Hebel AAC Panel

300mm
max.
6mm min.
gap
600 mm
max.
fig D7: iNSTALLATiON DETAiL hEBEL AAc WALL hORiZONTAL ShEETiNg ScREW fixiNg
For additional information, refer to CSR Hebel Design Guide Acoustic Wall Systems
NON-fiRE RATED
fiRE RATED
CSR Hebel AAC Panel
Fixings
50mm x 10g bugle

head screws
Location
fixing & Spacing
Field, Butt
Joints &
Edges
Screws at 600mm
max. horizontal
centres x 300mm
CSR Hebel AAC Panel
GYPROCK
Plasterboard
300mm
max.
6mm min.
gap
10-16mm
min. from
each edge
The Red Book
600mm
max.
D23
Notes
D24
The Red Book
Section E
Ceiling Systems
Contents
Introduction
E2
E2 E3
Installation
E4
Components
E4 E5

loor/Ceiling Systems
F
(Timber Flooring)
E6 E15
loor/Ceiling Systems
F
(Concrete Flooring)
E16 E23
oof/Ceiling Systems
R
(Pitched Roofing)
E24 E29
oof/Ceiling Systems
R
(Steel Sheet Roofing)
E30 E33
eiling Systems
C
Fire Rated from Above
E34
eiling Systems Fire Rated

C
from Above and/or Below
E35
ebel PowerFloor Fire Rated

H
from Above and/or Below
E36
Acoustic Tile Ceiling Systems
E37 E38
The Red Book
E39 E43
E1
Introduction
CSR has developed a wide range of floor/ceiling and
roof/ceiling systems to meet specific fire and acoustic
requirements. The systems include ratings for sound
transmission, sound impact and sound absorption, for fire
resistance up to FRL 120/120/120, and for up to 60 minutes
Resistance to Incipient Spread of Fire (RISF).
Generally, the fire resistance of floor and roof/ceiling systems
is assessed from below, in accordance with the standard
fire test of AS1530.4. This is the requirement of the BCA
where lightweight construction is used for compartmentation
and separation. Some elements such as fire-isolated
passageways are required to have an FRL when tested from
outside. A number of ceiling systems are available that offer
fire resistance from above to meet this requirement.
CSR ceiling systems use various fixing techniques for the
attachment of linings. These include:
a) Direct fixing to timber and steel joists or truss bottom
chords.
b) Screw fixing to steel furring channels.
c) Screw fixing to resilient or resiliently mounted furring
channels.
d) Screw fixing to suspended concealed metal grid.
e) Lay-in tiles in suspended exposed metal grid or Fricker
Easy Access System.
Design
Considerations
Structural
All floor, roof and ceiling framing must be designed for
the applied loads. Guidance for the selection of Rondo
suspension and grid components is given in brochure
NGYP570 Gyprock Ceiling Systems Installation Guide.
For other elements, refer to the appropriate design standards
or handbooks, or contact the manufacturer for design
information.
CSR recommends a minimum design pressure of 0.25kPa
(downward) for the ceiling framing. Other wind pressures may
be applicable; the designer should refer to AS/NZS1170.
Wind loads on external ceilings can be similar to those on
adjacent walls. Pressures can be positive or negative and
the lining, grid and structure should be designed to resist
the loads. Internal suspension components, even with down
struts, may not be suitable.
loads greater than 0.5kPa and for some FRLs.

CSR Ceiling systems have been designed for timber or steel
framing as noted in the system specification. Timber framing
shall be solid timber or engineered floor joist such as LVL
Glulam, plyweb joists, or trusses made from solid timber
framing must be designed in accordance with AS1720.1.
or AS1684
Steel framing for direct fixing of linings shall have maximum
base metal thickness (BMT) 1.6mm. Framing may be trusses,
top hats, C sections, furring channels, or similar members.
in all cases they should be designed in accordance with
AS4600.
For steel components in external environments, in heavy
industrial areas or coastal areas, additional coatings may be
required. Refer to AS/NZS2785 for guidance
Direct-Fix Framing Systems
Ceiling linings may be fixed directly to primary timber or steel
framing, or to secondary members such as furring channels
and battens.
Timber members to which plasterboard will be fixed
must comply with AS1684 Residential Timber-Framed
Construction, or be designed in accordance with AS1720.1
Timber Structures: Design Methods.
Steel framing to which plasterboard will be fixed must comply
with AS/NZS4600, Cold Formed Steel Structures.
Suspended Ceiling Systems
Ceiling suspension systems must be designed to
AS/NZS2785 Suspended Ceilings Design and Installation.
Ceilings in this manual are not trafficable. Trafficable systems
shall be designed in accordance with AS1657 Fixed
Platforms, Walkways, Stairways and Ladders.
Ceilings Rated from Above
Ceiling systems with plasterboard linings on top of joists
are not trafficable or intended to be used for storage. The
joists should be designed for all imposed loads including
construction loads where fixing of sheets is required from
above. Appropriate barriers and signage should be installed
to prevent access.
Fire Performance
Gyprock fire rated ceiling systems have been designed with
fire protection that protects the framing. This means that no
consideration of steel or timber framing design need be given
for the fire rating.
The maximum spacing of ceiling framing is 600mm. Closer

spacing may be required for some lining materials, for design
E2
The Red Book
To protect structural beams that are entirely within the ceiling

space, the structural adequacy component of the ceiling
system FRL must be at least equivalent to that required by
the structural member. For example, a ceiling system with
FRL 90/90/90 provides FRL 90/-/- for a steel beam within
the ceiling. Systems are available for beams that are not
entirely enclosed.
Framing and Lining
Plasterboard must be screw fixed only, adhesive is not
permitted. Joints in the outer layer of all systems must be
set with Gyprock paper tape. As a minimum, a single coat
finish may be used.
For general installation information refer to FIG E3 to E10.
Detailed fixing information is provided in brochures: Gyprock
Ceiling Systems Installation Guide NGYP570, CSR Gyprock
Shaft Systems NGYP546, Cemintel Ceiling Systems
NFC129, Cemintel ExpressWall Facade System NFC126
and CSR Hebel PowerFloor Design Guide, NHBL751-LRPF.
Ceiling systems are generally shown in a horizontal orientation.
The system FRL and RISF will not be reduced if ceilings are
built on a rake. The support framing, including lateral bracing,
must be designed considering the slope of the ceiling.
Alternative support framing members may be used where
timber joists are shown without reducing the system FRL
and RISF. These members include, but are not limited to,
steel, composite steel/timber joists, laminated timber joists,
and trussed or plywood web joists.
System specifications for minimum cavity depths and floor
surface finishes relate to acoustic performance only.
Roof Materials
Roof/ceiling systems may include options for roof tiles
and steel roof sheeting. Where steel sheeting is used, the
specified Anticon insulation must be installed to achieve
the stated FRL.
Caulking
To attain the specified fire rating, all perimeter gaps and
appropriate caulking material. In fire rated systems, to
attain the stated fire rating use CSR Gyprock Fire Mastic
or other tested fire rated material of equivalent or better
performance. Details for fire sealing of penetrations is given
in Section Z.
Vermiculite plaster is not to be used as a general purpose
fire rated caulking. Its use is specified in some wall/ceiling
junctions; refer to Gyprock Ceiling Systems Installation
Guide NGYP570. Vermiculite plaster has no capacity to
accommodate building movement.
The Red Book
Sound Transmission
Sound flanking, the effectiveness of workmanship and
caulking, the presence and treatment of penetrations, and
the inclusion of structural elements and bridging items, may
affect the acoustic performance of ceiling systems. Refer to
Section A for detailed information.
Alternative structural framing systems including steel, and
composite steel/timber joists, laminated timber joists, and
trussed or plywood web joists may be used without reducing
the system rating. The stated or implied minimum cavity
depth must also be maintained.
For effective control of sound in the flanking path of a floor
or roof space, acoustically rated walls should continue to
the underside of the floor or roof above. Alternatively, select
a detail from section G equivalent to the required Rw or
Rw + Ctr performance of the wall.
Ceilings systems beneath concrete slabs are unlikely to
achieve greater than DnT,w 65 due to the number of flanking
paths and variations in building construction.
Rw and Rw+Ctr values published are estimated performance
in a laboratory, and the higher values may be beyond the
limits of some laboratories to measure.
In non-fire rated systems, to attain the stated sound
transmission performance, use a tested acoustic sealant.
All penetrations should be treated to maintain the acoustic
integrity of the system.
The values given for roofs assume that there are no vents,
skylights or similar penetrations, and that the eaves are not
vented. Note that the effect of such penetrations will be lower
for ceilings lined with multiple layers of plasterboard.
Sound impact performance is stated as Ln,w + CI. Note that
a lower value of Ln,w + CI has a higher impact performance.
Values refer to expected laboratory performance, and
assume relatively stiff floor joists. Installations with joists of
lower stiffness may reduce the impact performance.
Floors finished with carpet and underlay achieve better
impact performance than those with hard surfaces such as
floorboards and tiles. If carpet is subsequently removed (from
a system that uses it in its performance value), the floor may
no longer meet the BCA impact requirements.
Sound Absorption
Gyprock Perforated Plasterboard, Ecophon, Fricker and
USG ceiling products have sound absorption qualities. These
products may be used to influence the reverberation time of
a room in order to improve the sound quality.
Product performance is expressed as NRC, and values vary
from 0 (total reflection) to 1.00 (total absorption). NRC values
can be found in system CSR 890
E3
Plasterboard & Fibre Cement Fixing

Ceilings may be built to achieve a particular Level of Finish
can have requirements for frame alignment, jointing and back
blocking methods.
Lining sheets must be installed with the long edge at right
angles to the direction of the framing to which they are fixed.
Refer to FIG E3 to E10 for general fixing information using
fastener and fastener/adhesive fixing methods. Detailed fixing
information is provided in Gyprock Residential Installation
Guide, NGYP547, Cemintel Ceiling Systems NFC129 and
Gyprock Ceiling Systems Installation Guide, NGYP570.
Fire rated systems MUST NOT rely on adhesive fixing of
linings.
Lining & Fixing Materials

Refer to Section A of this manual for detailed information
on Gyprock plasterboard products, Cemintel products,
adhesive and fastener specifications.
Details of the performance and range of acoustic ceiling tiles
can be found in specific product manuals. Please contact
CSR Fricker Comprador for more information.
Steel Grid & Suspension

Components
CSR recommends components manufactured by CSR
Fricker Comprador and Rondo Building Services Pty Ltd.
Additional information on the steel components can be
obtained from CSR Fricker, telephone 1300 374 253, or
Rondo 1300 367 663.
GYPROCK ReSiLienT MOunT
Jointing
24mm
4.5mm
Gyprock
Resilient
Mount

NGYP547 for detailed jointing and finishing of ceilings
lined with plasterboard. In multi-layer systems, jointing
and finishing is required on the visible outer layer only. As
a minimum, one base coat with paper tape may be used.
20mm
For detailed information on junctions with walls, access

hatches, light fixtures, control joints and penetrations, refer
to Section Z of this manual.
Components
Furring Channel
N129 or N308
Expressed joints are recommended for ceilings lined with

Cemintel products. Refer to Cemintel Ceiling Systems
NFC129 for more information.
40mm (N129)
28mm (N308)
Installation
GYPROCK Plasterboard
Control Joints
Control joints are used to reduce the possibility of cracks
forming from structural movement, thermal and moisture
movement and the like. Locations for joints should be chosen
by the designer with regard to building shape, structural
breaks, changes of substrate, and joint appearance.
Top Cross Rail
Ceiling systems with plasterboard linings must have control

joints at 12m maximum spacing in both directions. Ceilings
lined with CeminSeal Wallboard should have joints at 3.6m
in most cases. For additional information, refer to Cemintel
Ceiling Systems NFC129.
Gyprock
Resilient
Mount
NOTE: For fire rated systems with single layer lining fixed
direct to joists, no control joint detail is available. Use a
double layer system or furring channels where control joints
are required.
Suspended Ceilings
For detailed information on installation and maintenance of
suspension systems, contact CSR Fricker Comprador on
1300 374 253.
E4
Resilient Mount to
Top Cross Rail Clip
Gyprock Screw
Furring Channel
Other
Sarking with mass at least 350g/m2 is specified in some
roof/ceiling systems to achieve the acoustic value. Suitable
products are Bradford Thermofoil 733 and Thermotuff SS.
The Red Book
FiG e1: PeRFORATiOn PATTeRn.
FiG e2: GYPROCK PeRFORATeD

PLASTeRBOARD SHeeT 8.2% OPen AReA
1200mm
80mm
1040mm
440mm
160mm
1200mm
3600mm
440mm
Overall 3600mm
TABLe e1: MAXiMuM SPAn OF PLASTeRBOARD/WALLBOARD in CeiLinG APPLiCATiOnS

Maximum Spacing of Framing Members
GYPROCK/CEMINTEL Product

General Applications
Areas of High Humidity
Thickness
(mm)
(mm)
6.5mm Flexible Plasterboard used in two layers
350
NA
450
NA
6mm CeminSeal Wallboard
450
450
10mm All types of plasterboard except CD
600
450
600
450
13mm plasterboard all types except Perforated

9mm CeminSeal Wallboard
13mm Perforated Sheet
600
NA
16mm FYRCHEK
600
450
NOTE: NA = Not Applicable
TABLe e2: MAXiMuM SPAnS FOR MeTAL BATTen/FuRRinG CHAnneL uSeD in CeiLinGS
Gyprock Plasterboard
Layers x Thickness
N581*
N308*
N129*
Resilient Furring
Furring Channel
Furring Channel
Spacing of Furring
Spacing of Furring
450
600
600
600
450
600
Spacing of Furring
450
600
Maximum Permissible Spans for Metal Batten/Furring

1 x 10mm all products
1000
900
1550
1400
except CD and SUPERCHEK

1 x 10mm Gyprock CD
600
1000
1550
1 x 10mm SUPERCHEK
600
600
1100
1000
1550
1400
1 x 16mm FYRCHEK
600
600
1100
1050
1550
1400
2 x 13/16mm FYRCHEK
600
600
1100
900
1400
1300
900
800
1300
1200
1 x 13mm all products
3 x 16 FYRCHEK
NOTE: Furring to be continuous over 2 or more spans. Dead load deflection Span360. * Includes Internal UDL of 0.25kPa.
The Red Book
E5
Floor/Ceiling Systems
SYSTeM SPeCiFiCATiOn
ACOuSTiC
OPiniOn
TYPiCAL LAYOuT (CSR 803a shown)
PKA056
Floor finished bare or with carpet and underlay, as per

system table.
1 x 19mm or 22mm particleboard, or timber flooring of at
least 15kg/m2.
Timber or steel joists at 600mm maximum centres.
Minimum 190mm cavity depth.
Ceiling lining as per system table, direct fixed to framing.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
40/34
80-85
60-65
43/36
80-85
60-62
43/36
80-85
60-62
(a) Nil
39/32
60 65
42/34
60 65
42/34
60 65
(a) Nil
37/30
60 65
40/32
60 65
40/32
60 65
(a) Nil
43/37
55 60
46/39
80 85
55 60
46/39
80 85
55 60
CAViTY inFiLL
CSR 799
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 801
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 803
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
//
CSR 804
//
E6
2 x 10mm GYPROCK
SUPERCHEK.
The Red Book
RISF = Resistance to Incipient Spread of Fire
ACOuSTiC
OPiniOn
PKA056

system table.
least 15kg/m2.
Timber or steel joists at 600mm maximum centres (except
where noted in system table).
Ceiling lining as per system table, direct fixed to framing.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
40/34
55 60
43/36
55 60
43/36
55 60
(a) Nil
40/34
55 60
43/36
55 60
43/36
55 60
(a) Nil
43/37
55 60
46/39
80 85
55 60
46/39
80 85
55 60
(a) Nil
43/37
55 60
46/39
80 85
55 60
46/39
80 85
55 60
(a) Nil
42/36
55 60
45/38
80 85
55 60
45/38
80 85
55 60
(a) Nil
45/39
80 85
50 55
48/41
80 85
50 55
48/41
80 85
50 55
CAViTY inFiLL
CSR 805
1 x 13mm GYPROCK
FYRCHEK
Plasterboard.
30/30/30
EWFA 26162
NOTE: Framing at
450mm max. centres.
CSR 820
1 x 16mm GYPROCK
FYRCHEK
Plasterboard.
30/30/30
EWFA 26162
CSR 806
60/60/60
2 x 13mm GYPROCK
FYRCHEK
Plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 809
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 807
90/90/90
2 x 16mm GYPROCK
FYRCHEK
Plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 808
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
Plasterboard.
E7
ACOuSTiC
OPiniOn
PKA056

system table.
least 15kg/m2.
Timber or steel joists.
RONDO Furring Channels.
Ceiling lining as per system table, fixed to furring channel.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
39/32
60 65
44/35
60 65
44/35
60 65
(a) Nil
39/32
80-85
60-65
44/37
75-80
60-62
44/37
75-80
60-62
(a) Nil
42/36
80-85
60-62
47/41
75-80
55-60
47/41
75-80
55-60
(a) Nil
40/34
80-85
60-62
45/39
75-80
55-60
45/39
75-80
55-60
(a) Nil
41/34
55 60
46/37
80 85
55 60
46/37
80 85
55 60
(a) Nil
45/39
75-80
55-60
50/44
70-75
50-55
50/44
70-75
50-55
CAViTY inFiLL
CSR 810
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
//
CSR 886
1 x 10mm GYPROCK
Plasterboard CD.
//
CSR 885
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 811
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 812
1 x 6mm CeminSeal
Wallboard.
//
CSR 888
//
E8
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
The Red Book
ACOuSTiC
OPiniOn

system table.
PKA056

least 15kg/m2.
RONDO Furring channel at 600mm max. centres except
where noted in system table.
FRL
Report/Opinion
SYSTeM
n
CSR 815
30/30/30
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channel at
450mm maximum
centres.
EWFA 26162
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
42/36
55 60
47/39
80 85
55 60
47/39
80 85
55 60
(a) Nil
42/36
55 60
47/39
80 85
55 60
47/39
80 85
55 60
(a) Nil
45/39
80 85
55 60
50/42
75 80
55 60
50/42
75 80
55 60
(a) Nil
45/39
80 85
55 60
50/42
75 80
55 60
50/42
75 80
55 60
(a) Nil
44/38
80 85
55 60
49/41
80 85
55 60
49/41
80 85
55 60
(a) Nil
47/41
80 85
55 60
52/44
75 80
55 60
52/44
75 80
55 60
CAViTY inFiLL
CSR 816
1 x 16mm GYPROCK
FYRCHEK
plasterboard.
30/30/30
EWFA 26162
CSR 814
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 819
60/60/60
+RISF 60
minutes
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
EWFA 26162
CSR 817
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 818
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E9
ACOuSTiC
OPiniOn

system table.
PKA056

least 15kg/m2.
RONDO Furring Channel clipped to Gyprock
Resilient Mounts
OR
RONDO Resilient Furring Channel (N581).
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
46/37
75 80
55 60
55/46
65 70
50 55
54/44
65 70
50 55
(a) Nil
46/40
75 80
55 60
55/47
65 70
50 55
54/45
65 70
50 55
(a) Nil
49/43
75 80
55 60
58/50
65 70
50 55
57/48
65 70
50 55
CAViTY inFiLL
CSR 821
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 823
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 824
//
E10
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
The Red Book
ACOuSTiC
OPiniOn

system table.
PKA056

least 15kg/m2.
RONDO Furring Channel clipped to Gyprock
Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CSR 825
30/30/30
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channel at
450mm maximum
centres.
EWFA 26162
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
47/41
75 80
55 60
56/48
65 70
50 55
55/46
65 70
50 55
(a) Nil
46/40
75 80
55 60
55/47
65 70
50 55
54/45
70 75
50 55
(a) Nil
50/44
70 75
50 55
59/51
60 62
45 50
58/48
60 62
45 50
(a) Nil
50/44
70 75
50 55
59/51
60 65
45 50
58/48
60 65
45 50
(a) Nil
50/44
70 75
50 55
59/51
60 62
45 50
58/48
60 62
45 50
(a) Nil
49/43
70-75
35-40
59/53
60-62
35-40
59/52
60-62
35-40
CAViTY inFiLL
CSR 826
1 x 16mm GYPROCK
FYRCHEK
plasterboard.
30/30/30
EWFA 26162
CSR 829
60/60/60
+RISF 60
minutes
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
EWFA 26162
CSR 822
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 827
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 828
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E11
ACOuSTiC
OPiniOn
PKA056

system table.
least 15kg/m2.
RONDO Suspended Ceiling System.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
46/39
80 85
60 65
52/45
75 80
55 60
52/45
75 80
55 60
(a) Nil
46/40
80 85
60 65
52/46
75 80
55 60
52/46
75 80
55 60
(a) Nil
48/42
80 85
60 65
54/48
75 80
55 60
54/48
75 80
55 60
(d) 165 GW Partition
56/50
70 75
55 60
(a) Nil
49/43
80 85
60 65
54/49
75 80
55 60
54/49
75 80
55 60
56/51
70 75
55 60
CAViTY inFiLL
CSR 831
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 833
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 832
2 x 13mm GYPROCK
Plasterboard CD.
//
CSR 834
//
E12
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
The Red Book
ACOuSTiC
OPiniOn

system table.
PKA056

least 15kg/m2.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
46/40
80 85
60 65
52/46
75 80
55 60
52/46
75 80
55 60
(a) Nil
49/43
80 - 85
55 - 60
55/49
70 - 75
50 - 55
55/49
70 - 75
50 - 55
(a) Nil
50/44
75 80
55 60
56/50
70 75
50 55
56/50
70 75
50 55
58/52
70 75
50 55
(a) Nil
49/43
80 85
55 60
55/49
70 75
50 55
55/49
70 75
50 55
57/51
70 75
50 55
(a) Nil
52/46
75 80
55 60
58/52
70 75
50 55
58/52
70 75
50 55
60/54
65 70
50 55
CAViTY inFiLL
CSR 835
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
30/30/30
EWFA 26162
Furring channel at
450mm maximum
centres.
CSR 836
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 839
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 837
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 838
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E13
ACOuSTiC
OPiniOn

system table.
PKA056

least 15kg/m2.
RONDO Suspended Ceiling System with Gyprock
Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
48/41
75 80
55 60
54/47
70 75
50 55
54/47
70 75
50 55
56/49
65 70
50 55
(a) Nil
48/42
75 80
55 60
54/48
70 75
50 55
54/48
70 75
50 55
56/50
65 70
50 55
(a) Nil
51/45
70 - 75
50 - 55
57/51
60 - 62
45 - 50
57/51
60 - 62
45 - 50
CAViTY inFiLL
CSR 841
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 845
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
30/30/30
EWFA 26162
Furring channels at
450mm maximum
centres.
CSR 846
60/60/60
+RISF 30
minutes
EWFA 26162
E14
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
The Red Book
ACOuSTiC
OPiniOn

system table.
PKA056

least 15kg/m2.
Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
52/46
70 75
50 55
58/52
60 62
45 50
58/52
60 62
45 50
60/54
60 62
40 45
(a) Nil
51/45
70 75
50 55
57/51
60 62
45 50
57/51
60 62
45 50
59/53
60 62
45 50
(a) Nil
54/48
70 75
45 50
60/54
60 62
40 45
60/54
60 62
40 45
62/56
60 62
40 45
CAViTY inFiLL
CSR 849
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 847
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 848
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E15
ACOuSTiC
OPiniOn
PKA056
150mm concrete slab.

RONDO furring channel.
Cavity infill as per system table in 45mm cavity.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
56/46
70-75
35-40
60/50
65-70
35-40
59/49
65-70
35-40
(a) Nil
57/47
70-75
35-40
61/53
65-70
35-40
60/52
65-70
35-40
(a) Nil
56/46
70-75
35-40
60/50
65-70
35-40
59/49
65-70
35-40
(a) Nil
58/49
65-70
35-40
62/54
65-70
35-40
61/53
65-70
35-40
(a) Nil
59/50
65-70
35-40
64/56
60-65
35-40
63/55
60-65
35-40
(a) Nil
60/52
65-70
35-40
65/57
60-65
35-40
64/56
60-65
35-40
CAViTY inFiLL
CSR 257
Refer to
AS3600
1 x 10mm GYPROCK
Plasterboard CD.
CSR 258
Refer to
AS3600
1 x 13mm GYPROCK
Plasterboard CD.
CSR 259
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
Refer to
AS3600
CSR 260
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
Refer to
AS3600
CSR 261
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
Refer to
AS3600
CSR 262
Refer to
AS3600
E16
2 x 10mm GYPROCK
SUPERCHEK.
The Red Book
ACOuSTiC
OPiniOn
PKA056

Cavity infill as per system table in 45mm cavity.
FRL
Report/Opinion
SYSTeM
n
CSR 263
30/30/30
EWFA 26162
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channel at
450mm maximum
centres.
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
58/49
65-70
35-40
63/55
65-70
35-40
62/54
65-70
35-40
(a) Nil
59/50
65-70
35-40
62/54
60-65
40-45
61/53
60-65
40-45
(a) Nil
61/53
65-70
35-40
66/58
60-65
35-40
65/57
60-65
35-40
(a) Nil
62/54
65-70
35-40
66/58
60-65
35-40
65/57
60-65
35-40
(a) Nil
63/56
65-70
35-40
68/61
60-65
35-40
67/60
60-65
35-40
CAViTY inFiLL
CSR 264
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 265
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 266
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 267
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E17
ACOuSTiC
OPiniOn
PKA056

Gyprock Resilient Mounts direct fixed to concrete slab
at 600 x 1200mm maximum centres.
RONDO furring channel.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
57/47
70-75
40-45
61/51
65-70
40-45
60/50
65-70
40-45
(a) Nil
58/48
65-70
40-45
62/54
60-62
40-45
61/53
60-62
40-45
(a) Nil
57/47
70-75
40-45
61/51
65-70
40-45
60/50
65-70
40-45
(a) Nil
59/50
62-66
40-45
63/55
60-62
40-45
62/54
60-62
40-45
(a) Nil
60/51
62-66
40-45
65/56
60-62
40-45
64/55
60-62
40-45
(a) Nil
61/53
62-66
40-45
66/58
55-60
40-45
65/57
55-60
40-45
CAViTY inFiLL
CSR 337
Refer to
AS3600
1 x 10mm GYPROCK
Plasterboard CD.
CSR 959
Refer to
AS3600
1 x 13mm GYPROCK
Plasterboard CD.
CSR 339
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
Refer to
AS3600
CSR 340
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
Refer to
AS3600
CSR 341
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
Refer to
AS3600
CSR 342
Refer to
AS3600
E18
2 x 10mm GYPROCK
SUPERCHEK.
The Red Book
ACOuSTiC
OPiniOn
PKA056

Gyprock Resilient Mounts direct fixed to concrete slab
at 600 x 1200mm maximum centres.
FRL
Report/Opinion
SYSTeM
n
CSR 343
30/30/30
EWFA 26162
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channel at
450mm maximum
centres.
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
59/50
62-66
40-45
64/55
58-62
40-45
63/54
58-62
40-45
(a) Nil
60/52
62-66
40-45
67/59
55-60
40-45
66/58
55-60
40-45
(a) Nil
62/54
60-64
40-45
67/59
55-60
40-45
66/58
55-60
40-45
(a) Nil
63/55
60-64
40-45
66/58
55-60
40-45
65/57
55-60
40-45
(a) Nil
64/57
60-62
40-45
68/61
55-60
40-45
68/61
55-60
40-45
CAViTY inFiLL
CSR 344
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 345
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 346
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 347
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E19
ACOuSTiC
OPiniOn
PKA056

Minimum 150mm cavity.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CSR 457
Refer to
AS3600
1 x 10mm GYPROCK
Plasterboard CD.
CSR 458
Refer to
AS3600
1 x 13mm GYPROCK
Plasterboard CD.
CSR 459
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
Refer to
AS3600
CSR 460
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
Refer to
AS3600
CSR 461
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
Refer to
AS3600
CSR 462
Refer to
AS3600
E20
2 x 10mm GYPROCK
SUPERCHEK.
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
60/53
65-70
40-45
65/58
60-65
40-45
66/59
60-65
40-45
65/58
60-65
40-45
(a) Nil
61/54
65-70
40-45
66/59
60-65
40-45
67/60
60-65
40-45
66/59
60-65
40-45
(a) Nil
60/53
65-70
40-45
65/58
60-65
40-45
66/59
60-65
40-45
65/58
60-65
40-45
(a) Nil
62/55
65-70
40-45
67/60
60-65
40-45
68/61
60-65
40-45
67/60
60-65
40-45
(a) Nil
63/56
60-65
40-45
68/61
55-60
40-45
69/62
55-60
40-45
68/61
55-60
40-45
(a) Nil
65/58
60-65
40-45
70/63
55-60
40-45
71/64
55-60
40-45
70/63
55-60
40-45
CAViTY inFiLL
The Red Book
ACOuSTiC
OPiniOn
PKA056

Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CSR 463
30/30/30
EWFA 26162
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channel at
450mm maximum
centres.
CSR 464
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 465
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 466
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 467
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
62/55
60-65
40-45
67/60
55-60
40-45
68/61
55-60
40-45
67/60
55-60
40-45
(a) Nil
65/58
60-62
40-45
70/63
55-60
40-45
71/64
55-60
40-45
70/63
55-60
40-45
(a) Nil
67/61
60-65
40-45
72/66
55-60
40-45
73/67
55-60
40-45
72/66
55-60
40-45
(a) Nil
67/61
60-65
40-45
72/66
55-60
40-45
73/67
55-60
40-45
72/66
55-60
40-45
(a) Nil
69/63
55-60
40-45
74/68
50-55
40-45
75/69
50-55
40-45
74/68
50-55
40-45
CAViTY inFiLL
E21
ACOuSTiC
OPiniOn
PKA056

Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CSR 557
Refer to
AS3600
1 x 10mm GYPROCK
Plasterboard CD.
CSR 958
Refer to
AS3600
1 x 13mm GYPROCK
Plasterboard CD.
CSR 559
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
Refer to
AS3600
CSR 560
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
Refer to
AS3600
CSR 561
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
Refer to
AS3600
CSR 562
Refer to
AS3600
E22
2 x 10mm GYPROCK
SUPERCHEK.
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
61/53
60-65
40-45
66/58
55-60
40-45
67/59
55-60
40-45
66/58
55-60
40-45
(a) Nil
62/55
60-65
40-45
67/60
55-60
40-45
68/61
55-60
40-45
67/60
55-60
40-45
(a) Nil
61/53
60-65
40-45
66/58
55-60
40-45
67/59
55-60
40-45
66/58
55-60
40-45
(a) Nil
63/56
60-62
40-45
68/61
55-60
40-45
69/62
55-60
40-45
68/61
55-60
40-45
(a) Nil
64/57
60-62
40-45
69/62
55-60
40-45
70/63
55-60
40-45
69/62
55-60
40-45
(a) Nil
66/60
60-62
40-45
71/65
55-60
40-45
72/66
55-60
40-45
71/65
55-60
40-45
CAViTY inFiLL
The Red Book
ACOuSTiC
OPiniOn
PKA056

Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CSR 563
30/30/30
EWFA 26162
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channels at
450mm maximum
centres.
CSR 564
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 565
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 566
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 567
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
Rw / Rw+Ctr
Bare Floor
Ln,w+Ci
Carpet +
underlay
Ln,w+Ci
(a) Nil
63/56
60-62
40-45
68/61
55-60
40-45
69/62
55-60
40-45
68/61
55-60
40-45
(a) Nil
66/59
60-62
40-45
71/64
55-60
40-45
72/65
55-60
40-45
71/64
55-60
40-45
(a) Nil
68/62
60-62
40-45
73/67
55-60
40-45
74/68
55-60
40-45
73/67
55-60
40-45
(a) Nil
68/62
60-62
40-45
73/67
55-60
40-45
74/68
55-60
40-45
73/67
55-60
40-45
(a) Nil
70/64
55-60
40-45
75/69
50-55
40-45
76/70
50-55
40-45
75/69
50-55
40-45
CAViTY inFiLL
E23
Roof/Ceiling Systems
ACOuSTiC
OPiniOn
TYPiCAL LAYOuT (CSR 953 shown)
PKA056
A pitched tiled roof with or without 350g/m2 sarking.

OR
A steel sheet roof minimum 0.42mm with minimum
Bradford Anticon 55 insulation over battens.
Ceiling Joists or Trusses at 600mm maximum centres
(except where noted in system table).
Ceiling lining as per system table, fixed to framing.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CAViTY inFiLL
Steel Roofing
with Anticon
Tiled Roof
without Sarking
Tiled Roofing
with Sarking
Rw / Rw+Ctr
CSR 948
1 x 10mm GYPROCK
Plasterboard CD.
//
NOTE: Framing at
450mm max. centres.
42/32
40/35
42/36
43/34
41/36
43/38
42/32
40/35
42/36
43/33
41/36
43/37
44/35
42/37
44/39
43/33
41/36
43/37
42/32
40/35
42/36
43/34
41/36
43/38
42/32
40/35
42/36
44/35
45/39
46/40
46/37
46/40
48/41
44/35
45/39
46/40
47/38
46/41
48/42
49/40
47/43
49/44
47/38
46/41
48/42
49/40
50/44
51/45
51/42
51/45
53/46
49/40
50/44
51/45
CSR 952
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 949
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
//
CSR 950
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 953
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
CSR 951
//
E24
2 x 10mm GYPROCK
SUPERCHEK.
The Red Book
ACOuSTiC
OPiniOn
PKA056

OR
Ceiling Joists or Trusses at 600mm maximum centres
(except where noted in system table).
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CAViTY inFiLL
Steel Roofing
with Anticon
Tiled Roof
without Sarking
Tiled Roofing
with Sarking
Rw / Rw+Ctr
CSR 954
30/30/30
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
44/35
42/38
45/39
46/38
43/39
46/40
NOTE: Framing at
450mm max. centres.
44/35
42/38
45/39
49/40
47/43
50/44
51/42
48/44
51/45
49/40
47/43
50/44
49/40
47/43
50/44
51/42
48/44
51/45
49/40
47/43
50/44
51/42
50/45
52/46
52/44
51/45
53/47
51/42
50/45
52/46
54/45
53/48
55/49
55/47
54/49
56/50
54/45
53/48
55/49
CSR 956
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 870
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 871
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 955
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E25
ACOuSTiC
OPiniOn
PKA056

OR
Ceiling Joists or Trusses.
RONDO Furring Channel.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CAViTY inFiLL
Steel Roofing
with Anticon
Tiled Roof
without Sarking
Tiled Roofing
with Sarking
Rw / Rw+Ctr
CSR 862
1 x 10mm GYPROCK
Plasterboard CD.
//
44/34
42/37
44/38
45/36
43/38
45/40
44/34
42/37
44/38
45/35
43/38
45/39
46/37
44/39
46/41
45/35
43/38
45/39
45/35
43/38
45/39
46/37
44/39
46/41
45/35
43/38
45/39
46/37
47/41
48/42
48/39
48/42
50/43
46/37
47/41
48/42
49/40
48/43
50/44
51/42
49/45
51/46
49/40
48/43
50/44
47/37
45/40
47/41
48/39
46/41
48/43
47/37
45/40
47/41
CSR 842
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 868
1 x 6mm CeminSeal
Wallboard.
//
CSR 863
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 864
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
CSR 843
//
E26
2 x 10mm GYPROCK
Plasterboard CD.
The Red Book
ACOuSTiC
OPiniOn
PKA056

OR
FRL
Report/Opinion
SYSTeM
n
CSR 844
30/30/30
EWFA 26162
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channels at
450mm maximum
centres.
CAViTY inFiLL
Steel Roofing
with Anticon
Tiled Roof
without Sarking
Tiled Roofing
with Sarking
Rw / Rw+Ctr
46/37
44/40
47/41
48/40
45/41
48/42
46/37
44/40
47/41
51/42
49/45
52/46
53/44
50/46
53/47
51/42
49/45
52/46
51/42
49/45
52/46
53/44
50/46
53/47
51/42
49/45
52/46
53/44
52/47
54/48
54/46
53/47
55/49
53/44
52/47
54/48
56/47
55/50
57/51
57/49
56/51
58/52
56/47
55/50
57/51
CSR 874
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 875
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 876
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 867
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E27
ACOuSTiC
OPiniOn
PKA056

OR
RONDO Furring Channel clipped to Gyprock Resilient
Mounts.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CAViTY inFiLL
Steel Roofing
with Anticon
Tiled Roof
without Sarking
Tiled Roofing
with Sarking
Rw / Rw+Ctr
CSR 850
1 x 13mm GYPROCK
Plasterboard CD.
//
47/37
44/40
47/41
48/39
46/41
48/43
47/37
44/40
47/41
46/36
44/39
46/40
47/38
45/40
47/42
46/36
44/39
46/40
48/39
49/43
50/44
50/41
50/44
52/45
48/39
49/43
50/44
51/42
50/45
52/46
53/44
51/47
53/48
51/42
50/45
52/46
53/44
54/48
55/49
55/46
55/49
58/50
53/44
54/48
55/49
CSR 854
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
//
CSR 851
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 853
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
CSR 852
//
E28
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
The Red Book
ACOuSTiC
OPiniOn
PKA056

OR
RONDO Furring Channel clipped to Gyprock Resilient
Mounts. Furring Channel at 600mm max. centres except
FRL
Report/Opinion
SYSTeM
n
CSR 855
30/30/30
EWFA 26162
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channels at
450mm maximum
centres.
CAViTY inFiLL
Steel Roofing
with Anticon
Tiled Roof
without Sarking
Tiled Roofing
with Sarking
Rw / Rw+Ctr
48/39
46/42
49/43
50/42
47/43
50/44
48/39
46/42
49/43
53/44
51/47
54/48
55/46
52/48
55/49
53/44
51/47
54/48
53/44
51/47
54/48
55/46
53/48
55/49
53/44
51/47
54/48
55/46
54/49
56/50
56/48
55/49
57/51
55/46
54/49
56/50
58/49
57/52
59/53
59/51
58/53
60/54
58/49
57/52
59/53
CSR 856
60/60/60
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
+RISF 30
minutes
EWFA 26162
CSR 857
60/60/60
+RISF 60
minutes
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 858
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 859
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E29
ACOuSTiC
OPiniOn
PKA056
Steel sheet roof

Bradford Anticon 55 over timber or steel purlins.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CAViTY inFiLL
Rw / Rw+Ctr
CSR 891
1 x 13mm GYPROCK
Plasterboard CD.
//
46/37
(b) 120 Soundscreen 3.0
46/37
45/36
45/36
47/38
47/38
CSR 896
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
//
CSR 898
30/30/30
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channels at
450mm maximum
centres.
EWFA 26162
CSR 892
60/60/60
+RISF 30
minutes
EWFA 26162
CSR 893
60/60/60
+RISF 60
minutes
EWFA 26162
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
48/39
48/39
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
50/42
50/42
52/44
52/44
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 894
120/120/120
+RISF 60
minutes
EWFA 26162
E30
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
The Red Book
ACOuSTiC
OPiniOn
PKA056
Steel sheet roof

Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CAViTY inFiLL
Rw / Rw+Ctr
CSR 065
1 x 10mm GYPROCK
Plasterboard CD.
//
45/36
45/36
46/36
46/36
45/36
45/36
47/38
47/38
48/39
48/39
49/40
49/40
CSR 860
1 x 13mm GYPROCK
Plasterboard CD.
//
CSR 066
1 x 10mm GYPROCK
SUPACEIL
plasterboard.
//
CSR 067
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 068
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
//
CSR 069
//
The Red Book
2 x 10mm GYPROCK
SUPERCHEK
plasterboard.
E31
ACOuSTiC
OPiniOn
PKA056
Steel sheet roof

Resilient Mounts.
FRL
Report/Opinion
SYSTeM
n
CSR 070
30/30/30
EWFA 26162
CeiLinG LininGS
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channels at
450mm maximum
centres.
CAViTY inFiLL
Rw / Rw+Ctr
47/38
47/38
CSR 071
60/60/60
+RISF 30
minutes
EWFA 26162
CSR 072
60/60/60
+RISF 60
minutes
EWFA 26162
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
51/41
51/41
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
51/43
51/43
51/43
51/43
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 073
90/90/90
+RISF 60
minutes
EWFA 26162
E32
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
The Red Book
ACOuSTiC
OPiniOn
PKA056
A low slope metal roof with Bradford Anticon 55.

150mm Timber or Steel Purlins.
FRL
Report/Opinion
SYSTeM
n
CeiLinG LininGS
CAViTY inFiLL (Refer to Section A)
Rw / Rw+Ctr
CSR 873
1 x 13mm GYPROCK
Plasterboard CD.
//
46/37
46/37
47/38
47/38
45/36
45/36
CSR 877
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
//
CSR 872
30/30/30
EWFA 26162
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
Furring channels at
450mm maximum
centres.
CSR 878
60/60/60
+RISF 30
minutes
EWFA 26162
CSR 880
60/60/60
+RISF 60
minutes
EWFA 26162
2 x 13mm GYPROCK
FYRCHEK
plasterboard.
51/42
51/42
1 x 13mm GYPROCK
FYRCHEK
plasterboard.
52/43
52/43
50/42
50/42
52/44
52/44
1 x 16mm GYPROCK
FYRCHEK
plasterboard (any
order).
CSR 865
90/90/90
2 x 16mm GYPROCK
FYRCHEK
plasterboard.
+RISF 60
minutes
EWFA 26162
CSR 866
120/120/120
+RISF 60
minutes
EWFA 26162
The Red Book
3 x 16mm GYPROCK
FYRCHEK
plasterboard.
E33
Ceiling Fire Rated from Above

ACOuSTiC
OPiniOn
PKA052

Steel framing maximum 1.6 BMT at 600mm maximum
centres.
Minimum cavity depth 150mm.
FRL
Report/Opinion
60/60/60
from top
only
SYSTeM
n
Above
CSR 981
FAR 2358
60/60/60
from top
only
CeiLinG LininGS
1 x 16mm GYPROCK FYRCHEK.

below
1 x 10mm GYPROCK Plasterboard CD.
CSR 982

below
FAR 2358
E34
38/31
(b) 50 GW Partition 11kg/m3
42/33
(c) 90 Gold Batts 2.0
45/36
(a) Nil
33/30
(a) Nil
44/37
50/41
(a) Nil
36/33
(a) Nil
36/33

Above
CSR 986

below
Nil.
Above
120/120/120
from top
CSR 985
below
only
FAR 2358
(a) Nil
Nil.
Above
120/120/120
from top
CSR 983
below
only
FAR 2358
Rw / Rw+Ctr
Above
FAR 2358
90/90/90
from top
only
Nil.
The Red Book
Ceilings Fire Rated from Above and/or Below

ACOuSTiC
OPiniOn
PKA052

Steel framing maximum 1.6mm BMT at 600mm maximum
centres.
Minimum cavity depth 150mm.
FRL
Report/Opinion
60/60/60
FAR 2358
SYSTeM
n
CeiLinG LininGS
Above & below
CSR 994 1 x 16mm GYPROCK FYRCHEK

plasterboard.
90/90/90
Above & below
from below
120/120/120 CSR 992 2 x 16mm GYPROCK FYRCHEK
plasterboard.
from above
FAR 2358
Rw / Rw+Ctr

(a) Nil
41/35
45/37
(a) Nil
47/41
51/43
(a) Nil
49/43
53/45
Above
120/120/120 CSR 993

FAR 2358
2 x 16mm GYPROCK FYRCHEK

plasterboard.
below
plasterboard.
ACOuSTiC
OPiniOn
PKA052
Shaftwall C-H studs at 600mm maximum centres.

Lining to top side as per system table, in framing.
FRL
Report/Opinion
60/60/60
from top
only
SYSTeM
n
CeiLinG LininGS
Above
CSR 987
FAR 2358
1 x 25mm GYPROCK SHAFT LINER PANEL.

below
1 x 16mm GYPROCK FYRCHEK plasterboard.
Above
90/90/90
FAR 2358
CSR 995
1 x 25mm GYPROCK SHAFT LINER PANEL.

below
Above
120/120/120 CSR 997 1 x 25mm GYPROCK SHAFT LINER PANEL.

FAR 2358
below
The Red Book

STuD DePTH
Rw / Rw+Ctr
64
102
(a) Nil
38/31
42/35
43/34
47/38
(a) Nil
41/34
46/40
46/37
51/43
(a) Nil
44/37
48/42
49/40
53/45
E35
Floor/Ceiling Fire Rated from Above and/or Below

SYSTEM SPECIFICATION Hebel PowerFloor
TYPICAL LAYOUT (Hebel 1635 shown)
Carpet and medium duty underlay.
ACOUSTIC
OPINION
PKA-A071
CSR Hebel PowerFloor.

Timber or steel joists at 600mm maximum centres.
=TL413
RONDO Furring Channel at 600mm maximum centres

fixed to joists with fixing clips (N226).
=TLi413

Note: Refer to CSR Hebel for design considerations.
FRL
Report/Opinion
SYSTEM
N
CEILING LININGS
CAVITY INFILL
Rw / Rw+Ctr
Ln,w+CI
Hebel 1600
240/240/240
from above
FCO 1303
//
from below
240/240/240
from above
FCO 1303
120/120/120
from below
Nil
(a) Nil
33/30
45
3 x 16mm GYPROCK
58/54
34
Hebel 1635
EWFA 26162
E36
The Red Book

ACOuSTiC
OPiniOn
OR
TeST
TYPiCAL LAYOuT
Fricker Suspension Clip

and 5mm hanging rod
staggered at 1200mm
centres
Rondo Duo suspended ceiling system with appropriate

acoustic ceiling tiles.
Refer to
CSR Fricker
Fricker Top Hat Cross

Runner every third tile
OR
Fricker Easy Access System with appropriate acoustic
ceiling tiles
OR
Fricker Ceiling Tile
Plasterboard ceiling or timber battens with

Ecophon Focus F acoustic ceiling tiles.
Fricker Top Hat

Main Runner
Fricker hidden C splines
(back-to-back) not fixed
to system
System CSR 890 with acoustic

ceiling tile options as per below
Material &
Thickness
Mineral Fibre
19mm
USG Mars ClimaPlus

USG Radar ClimaPlus
USG Impressions ClimaPlus
USG Olympia Micro ClimaPlus
USG Millennia ClimaPlus
Daiken Exceltone New NDF
Daiken Exceltone Travertine Delica
Mineral Fibre
15mm
Mineral Fibre
15mm
Mineral Fibre
15mm
Mineral Fibre
19mm
Mineral Fibre
15mm
Mineral Fibre
15mm
Mineral Fibre
15mm
Mineral Fibre
15mm
Mineral Fibre
15mm
Fricker 610-A
Fricker 611-A
Fricker 616-A
Ceiling System
Edge
Details
Colour
NRC
CAC
(db)
LR
SQ
SLT
FLB
SQ
SLT
SQ
SLT
SQ
SLT
White
White
White
White
White
White
White
White
White
.70-.80
.75-.85
.70-.80
.50-.60
.50-.60
.55
.55
.50
.50
35
35
35
33-35
33-35
33-35
33-35
30-35
30-35
89%
89%
89%
84%
84%
84%
84%
87%
87%
SQ
White
.70
35
87%
SQ
TB
AK
SQ
TB
AK
SQ
SBK
SQ
SBK
SQ
SBK
White
White
White
White
White
White
White
White
White
White
White
White
.55-.60
.55-.60
.55-.60
.55-.60
.55-.60
.55-.60
.70
.70
.55
.55
.70
.70
36-40
36-40
36-40
36-40
36-40
36-40
33-39
33-39
33-39
33-39
33-39
33-39
87%
87%
87%
87%
87%
87%
88%
88%
88%
88%
88%
88%
TWE
TWA
OWE
FC
WP
notes:
edge Details
Ceiling System
SQ = Square,
SLT = Shadowline Tapered
FLB = Fineline Bevel
TB = Tegular
SBK = Kerfed, Bevelled and Cut Back
AK = Shiplap
AK (F) = Tongue & Groove direct fix
TWE = Two Way Exposed

TWA = Two Way Access
OWE = One Way Exposed
FC = Fully Concealed
WP = Wall Panel
NRC = Noise Reductionj Coefficient
CAC = Ceiling Attenuation Class
LR = Light Reflectance
Custom tile options, metal pan perforations and module sizes are available. Please contact your local CSR Fricker Comprador sales office on
1300 FRICKER (1300 374 253) for further information or detailed technical data sheets on individual products.
CeiLinG TiLe eDGe DeTAiLS

Square
The Red Book
Shadowline
tapered
Tegular /
Fineline Bevel
Kerfed, Bevelled
and Cut Back
Shiplap
Shiplap (F)
E37

ACOuSTiC
OPiniOn
OR
TeST
TYPiCAL LAYOuT

and 5mm hanging rod
staggered at 1200mm
centres
Rondo Duo suspended ceiling system with appropriate

acoustic ceiling tiles.
Refer to
CSR Fricker

OR
Fricker Easy Access System with appropriate acoustic
ceiling tiles
OR
Plasterboard ceiling or timber battens with

Ecophon Focus F acoustic ceiling tiles.
Fricker Top Hat

Main Runner
to system
System CSR 890 with acoustic

ceiling tile options as per below
Ceiling System
Edge
Details
Colour
NRC
CAC
(db)
LR
SQ
AK
TB
AK (F)
SQ
AK (F)
White Frost
White Frost
White Frost
White Frost
White Frost
White Frost
.85
.80
.80
.75
.95
.95
21
25
23
n/a
30
n/a
85%
85%
85%
85%
85%
85%
Ecophon Solo S
Glasswool
40mm
SQ
White Frost
n/a
n/a
85%
Ecophon Hygiene Meditec
Glasswool
20mm
SQ
White Frost
.80
n/a
84%
SQ
White Frost
.85-.95
n/a
84%
SQ
Turquoise
.95-1.0
n/a
49%
Glasswool
40mm
SQ
SQ
SQ
Brown 610
Cerise 810
Med Grey 920
.95-1.0
.95-1.0
.95-1.0
n/a
n/a
n/a
14%
16%
34%
Plasterboard
13mm
SQ
.49
n/a
n/a
SQ
TB
SQ
TB
.70
.70
.85
.85
13
13
30
30
68%
68%
68%
68%
Ecophon Focus A
Ecophon Focus Ds
Ecophon Focus E
Ecophon Focus F
Ecophon Master A
Ecophon Master F
Material &
Thickness
Glasswool
20mm
Glasswool
40mm
Ecophone Hygiene Performance A

Ecophon Wall Panel A
Ecophon Wall Panel C
Perforated Plasterboard (with
Bradford Anticon 55, foil face up)
Perforated Metal Pan (1820 perf
with black fleece backing)
Perforated Metal Pan (1820 perf
with 18mm x 80kg/m insulation)
Glasswool
20mm
Glasswool
40mm
Steel 0.7mm
Steel 0.7mm
TWE
TWA
OWE
FC
WP
notes:
edge Details
Ceiling System
SQ = Square,
SLT = Shadowline Tapered
FLB = Fineline Bevel
TB = Tegular
SBK = Kerfed, Bevelled and Cut Back
AK = Shiplap
AK (F) = Tongue & Groove direct fix
TWE = Two Way Exposed

TWA = Two Way Access
OWE = One Way Exposed
FC = Fully Concealed
WP = Wall Panel
NRC = Noise Reductionj Coefficient
CAC = Ceiling Attenuation Class
LR = Light Reflectance
Custom tile options, metal pan perforations and module sizes are available. Please contact your local CSR Fricker Comprador sales office on
1300 FRICKER (1300 374 253) for further information or detailed technical data sheets on individual products.
CeiLinG TiLe eDGe DeTAiLS

Square
E38
Shadowline
tapered
Tegular /
Fineline Bevel
Kerfed, Bevelled
and Cut Back
Shiplap
Shiplap (F)
The Red Book
FiG e3: inSTALLATiOn DeTAiL SinGLe LAYeR ADHeSiVe & nAiL/SCReW FiXinG
For additional information, refer to GYP570, Gyprock Ceiling Systems Installation Guide.
For 1350mm width sheets, hold
sheet with temporary fastener
through block at every second joist
until adhesive sets
Timber or steel
framing
Adhesive Daubs
nOn-FiRe RATeD
230mm
max.
centres
2 Nails 50 to
75mm apart
or 1 screw
200mm
min. cts
200mm
min. cts
300mm max.
for cornice finish
150mm max.
for set finish
Fasteners
Adhesive
Refer to Section A
Gyprock Stud Adhesive
Location
Fixing & Spacing
Field
Sheet
Width
900mm
1200mm
1350mm
Adhesive Daubs at
230mm max. centres
and 200mm min. from
fastener points
2 daubs
4 daubs
4 daubs
Recessed
Joints
Nail/screw fix at each

frame member
Centreline
of
Sheet
2 nails at 50 to 75mm
apart or 1 screw at each
frame member
Butt
Joints
between
framing
Joint within 50mm of

centre line between
framing and adhesive fix
back-block
Nail fix at 150mm or
screw fix at 200mm
max. centres
Butt
Joints on
framing
For Level of Finish 4 and

5, where Butt Jointing is
unavoidable, joint centrally
between members and
back-block.
Nail at 150mm
or screw at 200mm max.
Openings
Nail fix at 150mm or

screw fix at 200mm
max. centres.
Sheet
Ends
For cornice finish, fasten

at 300mm max. cts.
For set finish, fasten at
150mm max. centres
Where permitted, Butt Joint on

member (Levels of Finish 0 to 3)
Offset butt joints in

adjoining sheets by
600mm minimum
FiG e4: inSTALLATiOn DeTAiL TWO LAYeR ADHeSiVe & SCReW FiXinG
2nd Layer
Fasteners
Adhesive
1st Layer
Body
Sheet
Width
900mm
1200mm
1350mm
Butt Joints
on framing
Sheet
Ends &
Openings
2nd Layer
Body
200mm max.
230mm
max.
300mm
max.
300mm max.
for cornice finish
150mm max.
for set finish
200mm min.
Adhesive
Daubs
For Levels of Finish 0 to

3, Butt Joint on member
and screw fix at 200mm
max. centres
For Level of Finish 4 and 5,
where Butt Jointing is
unavoidable, joint centrally
between members, fix with
laminating screws at 200mm
Offset Butt Joints in 2nd
layer 600mm min. in
adjoining sheets and
between layers
The Red Book
nOn-FiRe RATeD
1st Layer Refer to Section A
Screws
Timber or Steel Framing

230mm max.
200mm min.
Temporary block
Butt Joints in 1st

layer may be on
same member
Begin 1st layer

with a half
width sheet
Begin 2nd layer with a full width sheet

and offset recessed joint 300mm
minimum between 1st and 2nd layer
Refer to Section A
Fixing & Spacing
Screw fix to each
framing member at
300mm max. centres
4 screws equally spaced
Screw fix at 200mm
max. centres
Screw fix at 300mm
max. centres
Fixing & Spacing

Adhesive Daubs at
230mm max. centres
Sheet
and 200mm min. from
Width
fastener points
900mm
2 daubs
1200mm 4 daubs
1350mm 4 daubs
Recessed Screw fix at each
Joints
frame member
Centreline Screw fix at each frame
of Sheet
member
Butt Joints Screw fix at 200mm
on framing max. centres
between
200mm max. centres
framing
Openings Screws at 200mm max.
centres
Sheet
For cornice finish, screw
Ends
fix at 300mm max. cts.
For set finish, screw fix
E39
FiG e5: inSTALLATiOn DeTAiL SinGLe LAYeR SCReW FiXinG
nOn-FiRe RATeD
Practical
minimum 150mm
Structural support
of timber, steel or
concrete
Screws
Suspended Grid at
600mm maximum
centres
Fixing & Spacing
Recessed
Joints
& Body
Sheet
Width
900mm
1200mm
1350mm
Screw fix to each frame

at 10 to 16mm from
sheet edges and at
300mm max. centres
between.
Butt Joints Joint within 50mm of

between
centre line between
framing
framing. Back-block
and fix with laminating
screws at 200mm max.
centres.
300mm
max.
300mm max. for cornice finish

150mm max. for set finish
Refer to Section A
Location

200mm max.
Openings
Screw fix at 200mm

max. centres
Sheet
Ends
For cornice finish, screw

fix at 300mm max. cts.
For set finish, screw fix
For Level of Finish 4 and

5, where Butt Jointing is
unavoidable, support
plasterboard with additional
framing
200mm max.
Where permitted, Butt Joint
on member and screw fix at
200mm max. centres
(Levels of Finish 0 to 3)
Offset butt joints in
adjoining sheets by
600mm minimum
FiG e6: inSTALLATiOn DeTAiL PeRFORATeD PLASTeRBOARD SHeeTS
Framing at 600mm centres
nOn-FiRe RATeD
25mm GYPROCK screws

at 300mm centres
Screws
At butt joints, screw at

200mm centres opposed
Refer to Section A
Location
Fixing & Spacing
Recessed
Joints &
Body
Screw fix to each frame

at 10 to 16mm from
sheet edges and at
300mm max. centres
between

Sheet
Ends
Screw fix at 200mm

max. centres
Openings
Screw fix at 200mm

max. centres
Staggered butt joints

GYPROCK Perforated Plasterboard
(perforations not shown)
Border of standard GYPROCK plasterboard
or finish with wall angle trim
E40
The Red Book
FiG e7: inSTALLATiOn DeTAiL SinGLe LAYeR nAiL OR SCReW FiXinG

FOR SYSTeMS WiTH LininG ABOVe OR BeLOW FRAMinG
FiRe RATeD
Refer to system
specifications
Fasteners
Fixing & Spacing
Body of
Sheet
Fasten to each framing

member at 25mm
from sheet edges and
at 200mm maximum
centres
Butt
Joints
Butt Joint on framing

and fasten at 40mm
from sheet edges,
15mm from sheet ends
and at 150mm max.
centres (offset fasteners)
Openings
Fasten at
150mm max. centres
Sheet
Ends
Fasten at 15mm min.

from sheet edges and at
150mm max. centres
15mm
40mm
25mm
150mm
max.
40mm
15mm
min.
Refer to Section A
Location
200mm max.
150mm max.
Perimeter track/angle
required in fire rated
ceiling systems (refer
to Perimeter Details)
Stagger butt joints

in adjacent sheets
and offset fasteners
FiG e8: inSTALLATiOn DeTAiL One OR TWO LAYeR nAiL OR SCReW FiXinG
FOR SYSTeMS WiTH LininG ABOVe OR BeLOW FRAMinG
FiRe RATeD
Refer to system
specifications
Fasteners
40mm
25mm
40mm
40mm 40mm
200mm
max.
150mm
max.
15mm
15mm
min.
25mm
Butt Joints must be offset

600mm minimum in adjoining
sheets and between layers
to Junction Details)
Begin 2nd layer with full width sheet
and offset recessed joint 300mm
minimum between 1st and 2nd layer
The Red Book
Fixing & Spacing
Body of
Sheet
1st & 2nd
Layer

member at 25mm from
sheet edges and at
200mm max. centres
Butt
Joints
1st Layer

and fasten at 40mm
from sheet edges,
15mm from sheet ends
and at 150mm max.
Butt
Joints
2rd layer
Butt Joint within 50mm

of centre line between
framing and fix to 1st
layer with Laminating
Screws at 25mm from
sheet edges, 40mm
from sheet ends and at
200mm max. centres
Sheet
Ends
Fasten at 40mm from

sheet edges, 15mm min.
150mm max. centres
Openings
Fasten at 15mm min.

150mm max. centres
200mm max.
Butt Joints in 2nd

layer must be centred
between framing members
and fixed with laminating
screws
Stagger butt joints

in adjacent sheets
and offset fasteners
Refer to Section A
Location
Begin 1st
layer with half
width sheet
E41
FiG e9: inSTALLATiOn DeTAiL THRee LAYeR FiXinG TO STeeL OR TiMBeR FRAMinG nAiL OR SCReW FiXinG
FiRe RATeD
Suspended Grid, Steel

Framing or Timber Framing at
Fasteners
25mm
40mm
25mm
40mm
40mm
150mm
max.
150mm
40mm
40mm
15mm
15mm
min.
Fixing & Spacing
Body of
Sheet
1st & 2nd
Layers

member at 25mm from
sheet edges and at
200mm max. centres
Butt
Joints
1st & 2nd
Layers

and fasten at 40mm
from sheet edges,
15mm from sheet
ends and 150mm max.
Butt
Joints
3rd layer
Butt Joint within

50mm of centre line
between framing and
fix to previous layer
with Laminating Screws
at 40mm from sheet
edges, 40mm from
sheet ends and 200mm
max. centres
Sheet
Ends all
Layers
Fasten at 40mm from

sheet edges, 15mm min.
150mm max. centres
Body of
Sheet 3rd
Layer
400mm max. in each
direction
Openings
Fasten at 15mm min.

150mm max. centres
200mm max.
150mm
max.
15mm
40mm
1st and 2nd layer

Butt Joints on framing
members, offset 600mm
minimum between layers
25mm
Butt Joints in 3rd layer

must be placed centrally
between framing, offset
600mm minimum in adjoining
sheets and from previous layers
400mm
max.
to Perimeter Framing
& Caulking)
200mm
max.
400mm
max.
Refer to Section A
Location
Begin 1st layer with 400mm width sheet

Begin 2nd layer with 800mm width sheet
Begin 3rd layer with full width sheet
FiG e10: inSTALLATiOn DeTAiL PLASTeRBOARD FiXinG TO STeeL FRAMinG

FiRe RATeD FROM ABOVe AnD/OR BeLOW
FiRe RATeD
Top Layers Fixing Specifications
Fasteners
300mm
max.
150mm
max.
Refer to Section A
Location
Fixing & Spacing
Body of
Sheet
All Layers
Fix to upper framing at

max. 300 centres.
Fix lower framing
through to upper
framing at 200mm max.
centres
Butt
Joints
Fix to upper framing at

300mm max. centres.
Fix lower framing
through to upper
framing at 150mm max.
centres
Sheet
Ends
Fix at 150mm max.

centres
200mm
max.
150mm
max.
FiRe RATeD
150mm
max.
200mm
max.
150mm
max.
Bottom Layers
Fasteners
Refer to Section A
Sheet
fixing
Refer to 1, 2 and 3 layer

installation details
SUITABLE FOR:
E42
The Red Book
FiG e11: TYPiCAL inSTALLATiOn DeTAiL ROnDO DuO eXPOSeD GRiD SuSPenDeD CeiLinG SYSTeM
Practical minimum
150mm
Wall Angle
Trim
1200mm max.
between suspension
points
Main
Tee
300mm
Tile Hold Down Clip
N703 (optional)
Cross Tee
600mm
300mm
or accoustic tile
1200mm
600mm
Cross Tee
Duo 4
Main Tee
Duo 1/Duo 3
FiG e12: TYPiCAL inSTALLATiOn DeTAiL FRiCKeR eASY ACCeSS SYSTeM WiTH ACOuSTiC CeiLinG TiLeS
and 5mm hanging rod
staggered at 1200mm
centres
Modules of
1000 x 1000mm to
1500 x 1500mm
Tiles can be
rotated 90 in
modules

Fricker Top Hat
Main Runner
to system
The Red Book
E43
notes
E44
The Red Book
Section F
Services Systems
Contents
Introduction
F2
Fire Resistance
F2
F2
Framing & Lining
F3
Components
F3

Services Systems with Timber

Framing Rw + Ctr
F4
Services Systems with Steel

Framing Rw + Ctr
F5
Services Systems with Timber

Framing Rw
F6
Services Systems with Steel

Framing Rw
F7
Services Systems with Cavity
Timber or Steel Framing Rw/Rw + Ctr F8
Acoustic Separation Details
The Red Book
F9
F1
Introduction
Gyprock Services Systems are ducts, risers, bulkheads
and ceilings that provide protection from noise generated by
building services. These services include water supply pipes,
waste and storm water pipes, and air conditioning ducts.
The BCA has deemed to satisfy performance requirements
that vary depending on the room use adjacent to the service,
and there are some State variations. The requirements are
R w + Ctr = 25 to a kitchen or non-habitable room, and
Rw + Ctr = 40 for habitable rooms other than kitchens. The
State variations are for Rw = 30 and Rw = 45 for the same
respective room types.
For services located within separating walls, refer to
Section Z for details and performance information.
Fire Resistance
The services systems in this section have no Fire Resistance
Level. They may be used in conjunction with fire rated
wall and ceiling systems selected from elsewhere in this
manual.
Acoustic
Performance
The acoustic transmission performance of the services
systems is dependent on the type of support framing. In
some systems, higher ratings can be achieved with timber
framing compared to light steel framing. In cavity systems,
this does not apply.
Services systems used as bulkheads or ceilings may
incorporate downlights. The distribution of downlights in
a services system is specified as the maximum number
permitted in a 5m 2 area. The lights shall be evenly
distributed and no closer than 900mm apart. Where higher
concentrations of lights are required, an acoustic engineer
should be consulted.
Penetrations for downlights must be neat and tight to the
fitting. No additional sealing is required. Ensure insulation
material is kept clear of fittings and that transformers are
supported separately from the plasterboard lining.
The installation of exhaust grilles and ducting may reduce the
performance of the systems. The building designer should
contact the exhaust system manufacturer for performance
details.
Similarly, access panels might be required. Contact the panel
manufacturer for suitable products.
Lagging of pipes or ducts is specified in some services
systems. Lagging must provide complete coverage for the
full extent of the pipe or duct.
FIG F1: FlooR/CeIlInG oR RooF/CeIlInG wITh downlIGhTs

Bradford Glasswool
batts
Maximum
number of
downlights as
per system
specification
F2
Locally remove
insulation
The Red Book
Framing &
Lining
Framing shown in the system layout is indicative only. The
designer should ensure that framing elements are suitable for
the application. For systems specified with timber framing,
linings must be fixed directly to solid timber joists or studs of
minimum dimension 70 x 35mm that are spaced at 600mm
maximum centres. For all other framing construction, select
services systems that are specified for steel framing.
Except for fire grade plasterboard, fixing to framing may be
fastener only or combination fastener/adhesive. Refer to the
Gyprock Residential Installation Guide, NGYP547 and
Cemintel Wet Area Lining Systems, NFC101 for detailed
fixing, jointing and finishing information.
It should be noted that for all systems, setting joints is only
required for the outer layer.
For walls and ceilings, insulation must not be compressed
between the lining and any lagging or the service being
protected.
FIG F2: InsulaTIon CompRessIon
Components
Refer to Section A of this manual for detailed information on
CSR Gyprock plasterboard and Cemintel lining products,
jointing compounds, and fastener specifications.
Building Services Pty Ltd, telephone 1300 367 663.
Downlights may be of any non-gimbal type with glass cover,
suitable for a circular cut-out of up to 80mm diameter. Lights
weighing more than 250g must be supported separately
from the plasterboard lining.
Acoustilag 45 consists of 25mm Bradford glasswool
bonded to 4.5kg/m2 loaded vinyl. The glasswool side is to
be installed facing the service pipe or duct.
Lagging is to completely cover the service duct or pipe. Remove
a 50mm wide strip of glasswool and overlap at joints. Tape with
a quality aluminium tape.
FIG F3: FIRe RaTed ReGal haloGen downlIGhT
75mm 25mm
Insulation
Service
lagging
The Red Book
F3
services systems with Timber Framing Rw + Ctr

sYsTem speCIFICaTIon
aCousTIC
opInIon
TYpICal laYouT (CsR ss44 shown)
pKa058
Service Shaft or Ceiling

Timber studs or joists (min. 70 x 35mm) with direct fixed lining as
per system table.
Cavity insulation 75mm Bradford Glasswool
Partition batts 11kg/m3.
Pipe with Bradford Acoustilag 45 as per system table.
system n
linings
CsR ss44
Insulation
(Refer to System Specification)
pipe lagging
maximum n
downlights
per 5m2
Rw + Ctr
Nil
26
Acoustilag 45
40
Nil
30
Acoustilag 45
42
(a) Nil
Nil
25
Nil
28
Nil
28
Acoustilag 45
42
(a) Nil
Nil
26
Acoustilag 45
43
(a) Nil
Nil
31
(b) Nil
Acoustilag 45
45
1 x 10mm GYPROCK
CsR ss45
1 x 6mm CeminSeal
Wallboard.
CsR ss01
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
CsR ss02
1 x 13mm GYPROCK
plasterboard CD.
CsR ss04
2 x 10mm GYPROCK
plasterboard CD.
CsR ss46
2 x 16mm GYPROCK
F4
The Red Book
services systems with steel Framing Rw + Ctr

aCousTIC
opInIon
pKa058

Steel studs, joists or furring channels with direct fixed lining as
per system table.
system n
linings
Insulation
pipe lagging
maximum n
downlights Rw + Ctr
per 5m2
CsR ss08
Nil
25
Acoustilag 45
38
Nil
27
Acoustilag 45
41
Nil
26
(b) Nil
Acoustilag 45
36
Acoustilag 45
40
(a) Nil
Nil
27
(b) Nil
Acoustilag 45
41
Acoustilag 45
43
Nil
Nil
25
75 GW Partition 11kg/90 Gold Batts
Acoustilag 45
42
Nil
Nil
31
75 GW Partition 11kg/90 Gold Batts
Acoustilag 45
44
1 x 10mm GYPROCK
CsR ss10
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
CsR ss11
1 x 13mm GYPROCK
plasterboard CD.
CsR ss12
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
CsR ss13
2 x 10mm GYPROCK
plasterboard CD.
CsR ss17
2 x 16mm GYPROCK
The Red Book
F5
services systems with Timber Framing Rw

aCousTIC
opInIon
pKa058

Timber studs or joists (min. 70 x 35mm) with direct fixed lining as
per system table.
system n
linings
CsR ss20
Insulation
pipe lagging
maximum n
downlights
per 5m2
Rw
Nil
30
Acoustilag 45
50
Nil
31
Acoustilag 45
52
Nil
31
Acoustilag 45
52
Nil
31
Acoustilag 45
52
(a) Nil
Nil
31
Acoustilag 45
54
(a) Nil
Nil
34
Nil
40
1 x 10mm GYPROCK
CsR ss18
1 x 6mm CeminSeal
Wallboard.
CsR ss21
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
CsR ss22
1 x 13mm GYPROCK
plasterboard CD.
CsR ss23
1 x 13mm GYPROCK
SOUNDCHEK
plasterboard.
CsR ss19
2 x 16mm GYPROCK
F6
The Red Book
services systems with steel Framing Rw

aCousTIC
opInIon
pKa058

Steel studs, joists or furring channels with direct fixed lining as
per system table.
system n
linings
CsR ss30
Insulation
pipe lagging
maximum n
downlights
per 5m2
Rw
(a) Nil
Nil
22
Acoustilag 45
48
Nil
30
Acoustilag 45
51
Nil
30
Acoustilag 45
51
Nil
30
Acoustilag 45
50
Nil
31
Acoustilag 45
52
(a) Nil
Nil
34
(b) Nil
Acoustilag 45
55
1 x 10mm GYPROCK
CsR ss38
1 x 6mm CeminSeal
Wallboard.
CsR ss31
1 x 10mm GYPROCK
SUPERCHEK
plasterboard.
CsR ss32
1 x 13mm GYPROCK
plasterboard CD.
CsR ss34
2 x 10mm GYPROCK
plasterboard CD.
CsR ss39
2 x 16mm GYPROCK
The Red Book
F7
services systems with Cavity Timber or steel Framing Rw/Rw+Ctr

aCousTIC
opInIon
pKa052

Inner layer lining (as per system table) direct fixed to timber
or steel framing, to encase services.
Cavity of 70mm minimum.
Cavity insulation as per system table. For ceiling, minimum
1200mm each side of pipe or duct.
Outer layer/ceiling lining (as per system table) direct fixed
to timber or steel framing. 12mm minimum gap between
framing and inner linning.
system n
linings
CsR ss40
Insulation
maximum n
downlights Rw/Rw+Ctr
per 5m2
Nil
46/37
(b) TSB4 Polyester
Nil
46/39
Inner Layer
Nil
49/40
(b) TSB4 Polyester
Nil
49/42
Inner Layer
Nil
53/44
(b) TSB4 Polyester
Nil
53/46
Inner Layer
1 x 13mm GYPROCK SOUNDCHEK plasterboard.
Outer Layer/CeILIng
CsR ss41
Outer Layer/CeILIng
CsR ss42
Outer Layer/CeILIng
F8
The Red Book
FIG F4: aCousTIC sepaRaTIon BeTween Room and wasTe pIpe

Rw 45 through wall. (estimate pKa acoustic Consulting).
Rw 30 through ceiling. (CsR ss32a)
Gyprock Wet Area Acrylic Sealant
for acoustic integrity
1 x 13mm
GYPROCK
Plasterboard CD
Waste Pipe
75mm Bradford
Glasswool
Partition Batts 11kg/m3
75mm min.
clearance
75 Partition Batts - 11kg/m3
1 x 10mm
GYPROCK
Plasterboard CD
each side of steel
studs
Habitable room
1 x 13mm GYPROCK
Plasterboard CD
Non-habitable room
FIG F5: aCousTIC sepaRaTIon BeTween Room and wasTe pIpe

Rw+Ctr 40 through wall. (CsR ss11c).
Rw+Ctr 36 through ceiling. (CsR ss11b).
Gyprock Wet Area Acrylic Sealant
for acoustic integrity
Waste
Pipe
75mm Bradford
Glasswool
Partition Batts 11kg/m3
Acoustilag 45
Timber or
steel framing
1 x 13mm
GYPROCK
Plasterboard CD
each side of steel
studs
Habitable room
The Red Book
1 x 13mm GYPROCK
Plasterboard CD
600mm min.
Non-habitable room
F9
notes
F10
The Red Book
Section G
Contents
The Red Book
Introduction
G2
G3 G12
Flanking Paths via Floor
G13 G15
Flanking Paths via Wall
G16 G18
G1
Introduction
Flanking sounds reach adjoining areas by indirect paths,
rather than through the dividing element. The components
and cavities of the walls, floors and ceilings that surround the
dividing element are the main paths for flanking transmission.
When designing for room-to-room performance, all flanking
paths should be considered, as well as the dividing element
itself.
The flanking path values in this section are a guide to the
maximum sound transmission values that would be achieved
in a laboratory test. The rating assumes that the dividing
wall that is being flanked has an equivalent or higher sound
transmission performance (Rw or Rw + Ctr) than the flanking
value. Where a flanking system has a rating higher than that
of the dividing wall, the room-to-room transmission should
be taken as the wall value.
Each flanking path system is represented by a typical layout,
and is associated with one or more details. The details
show an example of the construction required, but must be
amended to suit the system specification and lining. Dividing
walls shown as single studs may be substituted with other
construction such as staggered studs, double studs and
masonry walls to achieve the same results.
Panel ceiling systems must have no lights or penetrations
within 600mm of dividing wall and plasterboard ceilings
must have no acoustically untreated penetrations in rooms
adjacent to dividing wall.
Building systems and construction methods can vary greatly
from site to site. CSR recommends that where acoustic
performance is important, an acoustic engineer be consulted
to assess the suitability of the flanking system values detailed
in this section.
G2
The Red Book

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Steel angle to
100mm
min
System insulation
Rondo DUO Two-way

Steel Grid Ceiling
System
System insulation

GYPROCK
Panel
Ceiling
System
EXTENT OF INSULATION
SYSTEM N
CEILING LININGS
1200mm each side

of the wall
Nil
Entire Ceiling
Rw
CSR FP01
(a) Gyprock plasterboard panel 10mm
38
44
45
(b) Ecophon 20mm Focus A, Ds or E 20mm
21
24
25
(c) Ecophon 20mm Focus Glasswool Panels + plasterboard

panels 10mm
42
48
49
(d) Ecophon Master A 40mm
30
31
31
30-35
30-36
30-36
35
35-36
35-36
(ef) USG Radar, Impressions, Olympia Micro 15mm

(f) USG Mars, Millenia 19mm
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
System insulation

100mm
min
System insulation
Ceiling Framing

Tape and set or

cornice finish
GYPROCK
plasterboard
ceiling

SYSTEM N
CEILING LININGS
Nil
1200mm each side

of the wall
Entire Ceiling
Rw / Rw+Ctr
CSR FP02
41/32
47/38
48/39
(b) 1 x 13mm GYPROCK Plasterboard panel.
43/34
49/40
50/41
(c) 1 x 13mm GYPROCK FYRCHECK Plasterboard
46/38
52/44
53/45
(d) 1 x 13mm + 1 x 16mm

GYPROCK FYRCHECK Plasterboard
55/47
59/51
60/52
54/46
58/50
59/51
55/47
59/51
60/52
The Red Book
G3

ACOUSTIC
OPINION
TYPICAL LAYOUT
Fix wall track to ceiling
frame with Rondo 704
Partition Clip
System
insulation
PKAA031

Wall with required sound rating, to underside
of ceiling.
Finish Bead as
required
GYPROCK Panel
Ceiling System
continuous over
wall in Rondo
DUO Two-way
Steel Grid
Continuous bead of
CSR Gyprock
Sealant or a closed
cell foam tape
above wall track

SYSTEM N
CEILING LININGS
Nil
1200mm each side

of the wall
Entire Ceiling
Rw
CSR FP03
35
40
42
(b) Ecophon Focus A, Ds or E 20mm
18-21
18-24
18-25
(c) Ecophon Master A 40mm
25-30
25-31
25-31
(d) USG Radar, Impressions, Olympia Micro 15mm
30-35
30-36
30-36
(e) USG Mars, Millenia 19mm
30-35
30-36
30-36
ACOUSTIC
OPINION
TYPICAL LAYOUT
System insulation
Ceiling framing
PKAA031

of ceiling.
Tape and
set or
cornice
finish
GYPROCK
plasterboard
ceiling system
continuous
over wall

SYSTEM N
CEILING LININGS
Nil
1200mm each side

of the wall
Entire Ceiling
Rw
CSR FP04
G4
(a) 1 x 10mm GYPROCK Plasterboard CD.
37
42
42
(b) 1 x 13mm GYPROCK Plasterboard CD.
39
45
45
(c) 1 x 16mm GYPROCK FYRCHECK Plasterboard.
43
48
50
(d) 1 x 13mm + 1 x 16mm

GYPROCK FYRCHECK Plasterboard.
47
48
50
47
48
50
48
48
50
The Red Book

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
600mm

600mm wide barrier of Bradford Glasswool
Partition batts 11kg/m3, compressed 30%.
of ceiling.
Finish Bead as
required
GYPROCK Panel
Ceiling System
continuous over
wall in Rondo
DUO Two-way
Steel Grid
Continuous bead of
CSR Gyprock
Sealant or a closed
cell foam tape
above wall track
Bradford
Glasswood 11kg/m3
compressed 30%
SYSTEM N
CSR FP10
CEILING LININGS
Rw
45
(b) USG Radar, Impressions, Olympia Micro 15mm
42
(a) USG Mars, Millenia 19mm
42
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Ceiling
framing
600mm

600mm wide barrier of Bradford Glasswool
Partition batts 11kg/m3, compressed 30%.
of ceiling.
GYPROCK
plasterboard
ceiling system
continuous
over wall
Tape and
set or
cornice
finish
Bradford
Glasswood 11kg/m3
compressed 30%
SYSTEM N
CSR FP11
The Red Book
CEILING LININGS
Rw
50
50
(c) 1 x 16mm GYPROCK FYRCHEK plasterboard.
50
(d) 1 x 13mm + 1 x 16mm GYPROCK FYRCHEK plasterboard.
50
(e) 2 x 13mm GYPROCK FYRCHEK plasterboard.
50
(f) 2 x 16mm GYPROCK FYRCHEK plasterboard.
50
G5

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
50mm Glasswool
seal continuous over
wall, held in place
with track or angle
10mm GYPROCK
plasterboard min.
continuous over wall
and fixed to soffit

10mm GYPROCK Plasterboard CD barrier
with 50mm Glasswool seal.
of ceiling.
GYPROCK Panel
Ceiling System in
Rondo DUO
Two-way Steel Grid
Finish Bead as
required
Fix track to ceiling
frame with Rondo
N704
Screw fix ceiling

tile to wall track
Wall with required
sound rating
SYSTEM N
Continuous bead of
CSR Gyprock
Sealant above wall
track
CEILING LININGS
Rw
48
35-40
(c) USG Radar, Impressions, Olympia Micro 15mm
40-45
(d) USG Mars, Millenia 19mm
40-45
CSR FP16
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
50mm Glasswool
seal continuous over
wall, held in place
with track or angle
10mm GYPROCK
plasterboard min.
continuous over wall
and fixed to soffit
Ceiling frame

10mm GYPROCK Plasterboard CD barrier
with 50mm Glasswool seal.
of ceiling.
GYPROCK
plasterboard
ceiling system
continuous
over wall
Wall with required
sound rating
SYSTEM N
CSR FP17
G6
CEILING LININGS
Tape and set or

cornice finish
Fix wall track to

ceiling framing
Rw
50
50
50
50
50
50
The Red Book

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Bradford Wavebar Quadzero
(4.0kg/m2) continuous over
wall and fixed to soffit
300mm min.
600mm min.
Bradford Wavebar Quadzero (4.0kg/m2)

continuous over wall and fixed to soffit with
50mm Glasswool seal.
of ceiling.
GYPROCK Panel
Ceiling System in
Rondo DUO
Two-way Steel Grid
Finish Bead as
required
Continuous bead of
CSR Gyprock Sealant
or closed cell foam
tape above wall track
Fix track to ceiling

frame with Rondo
part 704
Wall with required

sound rating
Screw fix ceiling

tile to wall track
SYSTEM N
50mm Glasswool
Blanket continuous
over wall
CEILING LININGS
Rw
48
35-40
40-45
40-45
CSR FP20
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Bradford Wavebar Quadzero
(4.0kg/m2) continuous over
wall and fixed to soffit
300mm min.
50mm Glasswool
Blanket continuous
over wall
600mm min.
Bradford Wavebar Quadzero (4.0kg/m2)

continuous over wall and fixed to soffit with
50mm Glasswool seal.
of ceiling.
GYPROCK
plasterboard
ceiling system
continuous
over wall
Wall with required
sound rating
SYSTEM N
CSR FP21
The Red Book
CEILING LININGS
Tape and set or

cornice finish
Fix wall track to
ceiling framing
Rw / Rw+Ctr
50/40
50/40
50/41
50/42
50/42
50/42
G7

ACOUSTIC
OPINION
TYPICAL LAYOUT
Floor or roof structure
PKAA031

11kg/m3 to 1200mm min. each side of wall.
GYPROCK panel
ceiling system
50mm Bradford
Partition batts
11kg/m3 1200mm
each side of wall
Wall system with
required rating
SYSTEM N
CEILING LININGS
Rw
48
40
45
45
CSR FP025
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
50mm Bradford
Partition batts
11kg/m3 1200mm
each side of wall

11kg/m3 to 1200mm min. each side of wall.
GYPROCK
plasterboard ceiling
system

Tape and set or

cornice finish or
shadowline bead
Wall system with
required rating
SYSTEM N
CEILING LININGS
Rw
50
52
(c) 1 x 10mm GYPROCK SUPERCHEK Plasterboard.
54
(d) 1 x 13mm GYPROCK SOUNDCHEK Plasterboard.
55
CSR FP26
G8
The Red Book

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Roof structure.
500mm minimum average cavity height.
Roof framing
with 500mm
min. average
cavity
R2.5 Glasswool
Gold Batts
Bradford Gold Batts R2.5.

Upper Ceiling 1 x 13mm + 1 x 16mm
GYPROCK FYRCHEK plasterboard.
Cavity 150mm minimum height with 50mm
Bradford Partition Batts 11kg/m3.
Lower Ceiling Lining as per system table.
13mm + 16mm
GYPROCK FYRCHEK
Plasterboard
150mm min. cavity

of upper ceiling.
50mm Bradford
partition batts 11kg/m3
Lower ceiling
Tape and set or

cornice finish
Wall system with

required rating
SYSTEM N
LOWER CEILING LININGS
Rw / Rw+Ctr
65/53
66/54
(c) 1 x 10mm GYPROCK SUPERCHEK Plasterboard.
66/54
(d) 1 x 13mm GYPROCK SOUNDCHEK Plasterboard.
67/55
CSR FP31
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Sheet metal or
tiled roof
Roof framing with 500mm
min. average cavity
Roof structure.
Bradford Gold
batts R2.5

Ceiling lining as per system table fixed with
28mm furring channel and clips to framing.
GYPROCK
Wall system with

required rating
SYSTEM N
CSR FP35
The Red Book
CEILING LININGS
Furring channel
and min. 40mm
cavity
Tape and set or
cornice finish
Rw / Rw+Ctr
47/39
51/43
(a) 1 x 10mm GYPROCK SUPERCHEK Plasterboard.
52/44
(a) 1 x 13mm GYPROCK FYRCHEK Plasterboard.
53/45
(a) 1 x 13mm + 1 x 16mm GYPROCK FYRCHEK Plasterboard.
59/51
G9

ACOUSTIC
OPINION
TYPICAL LAYOUT
Sheet metal or tiled roof
PKAA031
Roof structure.
Bradford Rockwool insulation between
battens.
Roof framing with

min. 200mm cavity
Bradford Gold
batts R2.5

Ceiling lining as per system table fixed to
framing.
Wall with required sound rating. Masonry
wall 110mm min.. thickness, extending to
underside of roof battens.
GYPROCK
(no acoustically
untreated lights,vents
or similar penetrations)
Tape and set or

cornice finish
Wall system with
required rating
Masonry wall min.

110mm thick
SYSTEM N
CSR FP40
CEILING LININGS
Rw / Rw+Ctr
65/55
(b) 1 x 10mm GYPROCK SUPACEIL Plasterboard.
65/55
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
20mm
0mm clearance
to stud and
GYPROCK
plasterboard
100mm max.
to first fastener
(Do not fix through
track)
Concrete soffit with thickness as per system

table.
Fill gap with CSR

Gyprock Sealant for
acoustic integrity

Stud
SYSTEM N
CSR FP45
G10
CONCRETE SOFFIT THICKNESS

fastened at 600mm
centres max.
Rw / Rw+Ctr
(a) 100mm
55/50
(b) 125mm
55/52
(c) 150mm
56/53
(d) 175mm
57/54
(e) 200mm
58/55
(f) 225mm.
58/56
(g) 250mm.
58/56
The Red Book

TYPICAL LAYOUT (Refer to detail below table)
ACOUSTIC
OPINION
PKAA031
Roof structure.
Ceiling lining as per system table fixed to framing.
CSR Party Wall system with required sound rating.
Central barrier extending to underside of roof battens.
SYSTEM N
CEILING LININGS
CSR FP50
Rw / Rw+Ctr
66/54
(b) 1 x 10mm GYPROCK SUPACEIL Plasterboard.
66/54
Non-combustible roofing
Roof battens
Roof framing
Nominal 10mm gap to top of GYPROCK

SHAFT LINER PANEL (track optional)
Fill void between

battens with Rockwool
cavity seal, 300mm
min. width
Battens may be continuous over party

wall. Refer to BCA requirements
Wall Clips at
each H-Stud
both sides of wall
Roof sarking.
For roofs without sarking,
protect Rockwool with
damp course under tiles
16mm GYPROCK FYRCHECK

laminated to GYPROCK SHAFT
LINER PANEL laminating screws at
400mm x 400mm max. centres
Required acoustic insulation

minimum 75mm Bradford
R1.5 Gold batts
600mm max.
Blocking to support
ceiling lining
No acoustically
untreated lights,
vents or similar
penetrations
Tape and set or

cornice finish
200mm min.
Wall Clips at
each H-Stud
both sides of wall
Required acoustic insulation

minimum 75mm Bradford
R1.5 Gold batts
No acoustically
untreated lights,
vents or similar
penetrations
4mm minimum gap
Refer to Party Wall

System Table for wall
lining and insulation
GYPROCK SHAFT
LINER PANEL
20-40mm gap
each side of wall
The Red Book
G11

ACOUSTIC
OPINION
TYPICAL LAYOUT
Continuously
fill gap with
Gyprock
sealant
PKAA031
Wall with required

sound rating
System insulation
Timber framed floor/ceiling.

75mm Bradford Gold Batts R1.5 in floor/
ceiling system.
Ceiling lining, material and fixing as per
system table.
Double stud wall with required sound rating,
above and below floor/ceiling.
Continuously
fill gap with
Gyprock
sealant
GYPROCK
system direct fixed to
joists or to furring/batten
Tape and set or

cornice finish
Wall with required

sound rating
PLASTERBOARD FIXING SYSTEM

SYSTEM N
CEILING LININGS
DIRECT FIXED TO TRUSS

OR JOIST
FIXED TO FURRING OR
BATTEN
Rw / Rw+Ctr
CSR FP55
G12
53/47
53/47
(b) 1 x 16mm GYPROCK FYRCHEK plasterboard.
55/49
55/49
(c) 1 x 13mm + 1 x 16mm GYPROCK FYRCHEK

plasterboard.
58/52
58/52
(d) 2 x 13mm GYPROCK FYRCHEK plasterboard.
57/51
57/51
58/52
58/52
The Red Book

ACOUSTIC
OPINION
TYPICAL LAYOUT
Wall with required
sound rating
Timber frame floor with separate joists and

discontinuous flooring.
Discontinuous
flooring
PKAA031
Continuously
fill gap with
Gyprock
sealant
Double stud wall with required sound rating.
SYSTEM N
Rw / Rw+Ctr
CSR FP60
60/55
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Wall with required

sound rating
Timber frame floor with separate joists and

Continuously
fill gap with
Gyprock
sealant
Seal skirting with 3mm

polyethylene tape
Single stud wall with required sound rating.

Discontinuous
flooring
The Red Book
SYSTEM N
Rw / Rw+Ctr
CSR FP61
48/42
G13

ACOUSTIC
OPINION
TYPICAL LAYOUT
Wall with required

sound rating
Timber framed floor with common joists and

PKAA031
Continuously
fill gap with
Gyprock
sealant
Seal skirting with 3mm

polyethylene
tape
y
Single stud wall with required sound rating.

Discontinuous
flooring
SYSTEM N
Rw / Rw+Ctr
CSR FP62
45/39
TYPICAL LAYOUT
Wall with required

sound rating
Timber frame floor with common joists and

continuous flooring.
ACOUSTIC
OPINION
PKAA031
Continuously
fill gap with
Gyprock
sealant
Double stud wall with required sound rating.
G14
SYSTEM N
Rw / Rw+Ctr
CSR FP63
45/39
The Red Book

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Stud
Concrete slab with thickness as per system

table.
GYPROCK
plasterboard
integrity
Studs bottomed
in track
10mm max. gap
at bottom of sheet
SYSTEM N
CSR FP75
The Red Book
CONCRETE SLAB THICKNESS
Rw / Rw+Ctr
(a) 100mm
55/50
(b) 125mm
55/52
(c) 150mm
56/53
(d) 175mm
57/54
(e) 200mm
58/55
(f) 225mm.
58/56
(g) 250mm.
58/56
G15

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Stud frame wall system with min.

75mm Bradford Gold batts
Fix end stud at
500mm maximum
vertical centres
GYPROCK
plasterboard as
per system table
Timber or steel stud continuous wall system

with 75mm Bradford Gold Batts R1.5.
Plasterboard lining to flanking path side, as
per system table.
Intersecting stud wall system, with required
sound rating.
Tape and
set corners
Intersecting wall with

required sound rating
SYSTEM N
CSR FP80
WALL LININGS
Rw / Rw+Ctr
45/40
(b) 1 x 10mm GYPROCK SUPERCHEK plasterboard.
48/43
(c) 1 x 13mm GYPROCK SOUNDCHEK plasterboard.
50/45
50/45
50/45
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
GYPROCK
plasterboard as
Steel Angle (75 x 75 x
per system table
0.7mm BMT) fixed to
stud with panhead screw
at 600mm max. cts
Timber or steel stud continuous wall system

with 75mm Bradford Gold Batts R1.5.
per system table.
sound rating.

Tape and
set corners
CSR Gyprock
Staggered Studs
and Clips
SYSTEM N
CSR FP82
G16
WALL LININGS
Rw / Rw+Ctr
51/43
53/45
54/46
53/45
54/46
The Red Book

ACOUSTIC
OPINION
TYPICAL LAYOUT (Refer to detail Z207)

PKAA031
Fix end stud at 500mm

maximum vertical
centres
Tape and
set corners
Caulk gaps with
Gyprock sealant
Timber or steel stud wall with 75mm Bradford

Gold Batts R1.5.
per system table.

Continuous
bead of
sealant
Intersecting wall system of masonry and

separate stud framing, with required sound
rating.
10mm
nom. gap
from
masonry
to lining
Fix end stud to masonry

at 500mm maximum
vertical centres
GYPROCK
plasterboard as
per system table
SYSTEM N
CSR FP84
WALL LININGS
Rw / Rw+Ctr
51/43
52/44
54/46
53/45
54/46
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Sealant
GYPROCK
plasterboard as
per system table
Timber or steel stud wall system with 75mm

Fix end stud at

500mm maximum
vertical centres

per system table.
sound rating.

Tape and
set corners
Sealant
SYSTEM N
CSR FP86
The Red Book
WALL LININGS
Rw / Rw+Ctr
58/50
58/50
G17

ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031

Finish corners
as required
Continuous masonry wall, with mass as per

system table.
sound rating.
CSR Gyprock Fire Mastic to
depth of first layer minimum
CSR Gyprock
Staggered Studs
and Clips
SYSTEM N
CSR FP88
Wall track fixed to

masonry at 600mm
max. centres
MASONRY WALL MASS
Rw / Rw+Ctr
(a) 90kg/m2
53/48
(b) 150kg/m2
55/50
(c) 200kg/m2
56/51
ACOUSTIC
OPINION
TYPICAL LAYOUT
PKAA031
Wall system insulation

Dampcourse
6mm Cemintel Wallboard barrier
full height of wall and fixed to stud
External masonry veneer and continuous stud

wall system with 75mm Bradford Gold Batts
R1.5.
GYPROCK
plasterboard as
per system table
Cemintel Wallboard barrier (as per table).

per table.
sound rating.

Tape and
set corners
BARRIER
SYSTEM N
WALL LININGS
Nil
6mm Cemintel Wallboard

Rw / Rw+Ctr
CSR FP90
G18
39/30
59/50
41/32
60/51
45/37
60/52
43/35
60/52
45/37
60/52
The Red Book
Section Z
Contents
Junctions

Head & Base Details
Z2 Z6
Wall Junction Details
Z7 Z8
Wall Control Joints
Z9
Ceiling Control Joints
Z10 Z11
Ceiling Perimeter Details
Z12 Z16
Penetrations

The Red Book
Service Penetrations
Acoustic & Fire Performance
Z17 Z18
Penetration Details
Z19 Z24
Z1
Head & Base Details

Note: Wall/ceiling intersection details require engineers approval where seismic loads are expected.
FIG Z004: HEAD FOR

SUSPENDED TEE-LOCK CEILING
Fix track at each
main runner
Main Runner
6 10mm
clearance to
GYPROCK
plasterboard
100mm max.
to first fastener
(Do not fix
through track)

cornice. Do not rigidly
used
Fill gap with CSR

Gyprock Sealant for
acoustic integrity
Stud
6mm
clear
of
soffit
Track section with

to soffit at 600mm
centres max.
RONDO P50 or P60

Shadowline Stopping
Bead (finish as
required)
to15mm below head
track flanges
Stud
NOTE: This method of

construction is not
recommended for studs
adjacent to windows or
doors or studs carrying
loads greater than
0.25kPa.
FIG Z005: HEAD FOR SUSPENDED CEILING
Additional Furring Channel

where wall runs parallel to
setout
Suspended Ceiling
Top Cross Rail
20mm gap
100mm max.
(do not fix
through track)
NOTE: Stopping bead
used
Fix cornice to
ceiling only with
Gyprock Cornice
Cement
Stud

fastened at 600mm
centres max.
Fix Head Track to Furring

Channel at 600mm max.
centres

to15mm below head
track flanges
Stud
Where wall runs

perpendicular to furring
channel fix track to furring
at each intersection
FIG Z006: WALL BASE DETAIL

STEEL STUD WALL SYSTEM
Fix extruded track at

each furring channel
ceiling fixed to furring
channel at appropriate
centres
Proprietary extruded
aluminium track
Fix track at 600mm max.

centres. With 150mm width
track, use 2 fixings
integrity
Stud
Z2
Finish as required
Flexible Mastic
FIG Z003: HEAD USING ALUMINIUM HEAD TRACK

Furring
Channel
Furring Channel in
normal setout position
Stud
GYPROCK
plasterboard
Studs bottomed
in track
10mm max. gap
at bottom of sheet
The Red Book
FIG Z007: WALL/CEILING JUNCTION PLASTERBOARD

LINING
System insulation
System
insulation
Ceiling framing
Tape and
set or
cornice
finish
GYPROCK
plasterboard
ceiling system
continuous
over wall

LINING
100mm
min
System insulation
FIG Z010: WALL/CEILING JUNCTION PANEL LINING
System insulation
Ceiling Framing
Tape and set or

cornice finish

LINING
Finish Bead as
required
GYPROCK Panel
Ceiling System
continuous over
wall in Rondo
DUO Two-way
Steel Grid
Continuous bead of
CSR Gyprock
Sealant or a closed
cell foam tape
above wall track
Steel angle to
System insulation
GYPROCK
plasterboard
ceiling
Fix wall track to ceiling

frame with Rondo 704
Partition Clip
100mm
min
Rondo DUO Two-way

Steel Grid Ceiling
System
System insulation
GYPROCK Panel
Ceiling System
50mm Bradford
Partition batts
11kg/m3 1200mm
each side of wall
GYPROCK
system
Tape and set or

cornice finish or
shadowline bead
Wall system with
required rating
The Red Book
GYPROCK panel
ceiling system
50mm Bradford
Partition batts
1200mm each
side of wall
Wall system with
required rating
Z3
CSR Gyprock
Staggered Stud Clip
FIG Z014: STAGGERED STUD BASE WITH RONDO

P140 SPACER (HEAD SIMILAR)
FIG Z016: PREFORMED SHOWER BASE

(Maintains the FRL of the wall system in which it is installed).In many
applications, FRL /60/60 can be achieved using single layer systems.
However, in order to satisfy acoustic requirements between rooms
and corridors, double layer systems or double stud systems are
commonly used..
Plasterboard lining not shown

(minimum 1 x 13mm
GYPROCK FYRCHEK required)
FIG Z013: STAGGERED STUD BASE WITH CSR

GYPROCK STAGGERED STUD CLIP (HEAD SIMILAR)
10mm GYPROCK
AQUACHEK or
FYRCHEK MR
1 or 2 layers of GYPROCK
FYRCHEK MR
Single
or
double
stud
wall
system
Waterproofing sealer
applied to face of
plasterboard behind
tiled area
Vertical Corner
Angle Flashing
Ceramic Tiles
Nogging for
plasterboard fixing
Flashing Tape
(25mm min.)
Flexible Sealant
Screw fix
J-track to
stud
6mm
Preformed
Shower Base
Mortar Bed
Rondo P140 J-track

(100mm length
nominal)
Wet Area Applications
FIG Z017: BATH INSTALLATION

(Maintains the FRL of the wall system in which it is installed).
FIG Z015 INSITU-FORMED SHOWER RECESS CERAMIC

TILED
Single
or
double
stud
wall
system

1 or 2 layers of
GYPROCK FYRCHEK
MR each side of wall
10mm GYPROCK
AQUACHEK
1 or 2 layers of
GYPROCK
FYRCHEK MR
Ceramic Tiles
Flashing Tape
(25mm min.)
Vertical Corner
Angle Flashing
Ceramic Tiles
Timber Stud
Insitu Internal Membrane
applied to face of
wall lining and floor
Approved Flashing
when required by
building regulations
Masking Tape
Foam plastic rod
used as essential
bond breaker
Mortar Bed
Flexible Sealant

(minimum 1 x 13mm

(minimum 1 x 13mm
Single
or
double
stud
wall
system
Approved Flashing when

required by building
regulations
Structural
Sheet Flooring
Continuously
fill 6mm gap
with CSR
Gyprock Fire
Mastic to
13mm
minimum
depth
6mm
Bath
Support Batten
fixed to framing
Mortar Bed
Continuously fill 6mm gap with

13mm minimum depth
Z4
Continuously fill 6mm gap with

13mm minimum depth
The Red Book
Fire Rated Applications

NOTE: Wall/ceiling intersection details require engineers approval where seismic loads are expected.
FIG Z021: HEAD/BASE STUDS LINED ONE SIDE ONLY

Track section with

to ceiling at 600mm
maximum centres
Continuously fill gap

with CSR Gyprock
Fire Mastic
6 10mm
clearance to
plasterboard
100mm max. to
first fastener. Do
not fix through
head track
NOTE: Junction may

be finished square,
with stopping bead or
with cornice. Do not
rigidly fix cornice to
walls where friction
joints are used
Stud
15mm
clear
of
soffit

with CSR Gyprock
Fire Mastic to 13mm
minimum depth
Track section with
to ceiling at 600mm
maximum centres
GYPROCK
FYRCHEK
plasterboard
1, 2 or 3 layers
100mm
max. to
Nogging
track
60mm
max.
Stud 15mm
clear of soffit
N8 Tek
screw one
side only
GYPROCK
FYRCHEK
plasterboard
1, 2 or 3 layers

cornice. Do not rigidly fix
cornice to walls where
friction joints are used

with CSR Gyprock
Fire Mastic
N8 Tek
screw both
sides

FIG Z022: CEILING/WALL JUNCTION

Furring Channel
over wall
20mm clearance
to stud and
GYPROCK
plasterboard
100mm max. to
first fastener. Do
not fix through
head track
NOTE: Stopping bead

where friction joints
are used
Suspended Ceiling
Top Cross Rail

with CSR Gyprock
Fire Mastic to 13mm
minimum depth
Stud

fastened to ceiling at
600mm maximum
centres
GYPROCK
FYRCHEK
plasterboard
1, 2 or 3 layers
FIG Z020: WALL BASE
10mm Gap
6mm Gap
Gyprock Fire
Mastic
Tape and set if

required
Rondo P50
2 or 3 layers
GYPROCK
FYRCHEK
plasterboard
Stud
1, 2 or 3 layers
GYPROCK
FYRCHEK
plasterboard
FIG Z023: CEILING/WALL JUNCTION
Metal track fixings at

600mm max. centres.
With 150mm width track,
use 2 fixings
with CSR Gyprock
Fire Mastic to 13mm
minimum depth
The Red Book
Stud
GYPROCK
FYRCHEK
plasterboard
1, 2 or 3 layers
Studs bottomed
in track
10mm Gap
10mm Gap
with CSR Gyprock
Fire Mastic to 13mm
minimum depth
Backing Rod
2 or 3 layers
GYPROCK
FYRCHEK
plasterboard

with CSR Gyprock
Fire Mastic to 13mm
minimum depth
Stud
1, 2 or 3 layers
GYPROCK
FYRCHEK
plasterboard
Z5
FIG Z024: RECESSED SKIRTING DETAIL
FIG Z026: STAGGERED STUD HEAD AND BASE

DETAILS
FRL 90/90/90
Steel track fixed to soffit

16mm GYPROCK
16mm GYPROCK
FYRCHEK
plasterboard
13mm GYPROCK
FYRCHEK
plasterboard
13mm GYPROCK
Stud
GYPROCK
Staggered
Stud Clip
Stopping bead
and set finish
1.0mm steel strip
with 50mm min.
overlap
Neat butt joint

6mm Cemintel
Wallboard
400mm
max.

with CSR Gyprock
Fire Mastic
75mm max.
Rebate 12mm
wide max. x 5mm
deep max.
12mm MDF skirting
with 1.0mm steel strip
behind. Separately fix
skirting and steel with
two screws per stud
Staggered
stud profiles
NOTE: Wall/ceiling
junction may be
cornice.
15mm
with CSR Gyprock
Fire Mastic to depth
of first layer
GYPROCK
plasterboard
Staggered
stud profiles
bottomed in
track/angle
GYPROCK
plasterboard
GYPROCK
Staggered
stud clip
FIG Z025: RECESSED SKIRTING DETAIL

FRL 120/120/120
16mm GYPROCK
FYRCHEK
plasterboard
75mm max. to
first fastener.
Stud
16mm GYPROCK
FYRCHEK
plasterboard

with CSR Gyprock
Fire Mastic
FIG Z027: STAGGERED STUD WITH RONDO P140

SPACER
Stopping bead
and set finish
1.0mm steel strip
with 50mm min.
overlap
Neat butt joint

9mm Cemintel
Wallboard
with CSR Gyprock
Fire Mastic
400mm
max.
Rebate 10mm
wide max. x 6mm
deep max.
12mm MDF skirting
with 1.0mm steel strip
behind. Separately fix
skirting and steel with
two screws per stud
75mm max.
15mm
with Gyprock Fire
Mastic/FB1 to depth
of first layer
Staggered
studs
NOTE: Wall/ceiling
junction may be
cornice.
GYPROCK
plasterboard
GYPROCK
plasterboard
Rondo P140 track

100mm nominal
length fixed to stud
75mm max. to
first fastener.
Z6
Caulk 10mm max.

gap under outer
plasterboard layer
with Gyprock Fire
Mastic/FB1
The Red Book
Wall Junction Details

NOTE: Wall intersection details require engineers approval where seismic loads are expected. These details are also suitable
for non fire rated applications. Where acoustic integrity is required, refer to Flanking Details.
FIG Z028: CORNER DETAIL PLASTERBOARD WALL
FIG Z030: WALL END DETAIL PLASTERBOARD WALL
Set corner with external angle

bead and cement
Extent of FRL
600mm max.
Screw fix studs

at 600mm max.
vertical centres
100mm max.
Track
Set corner with

paper tape and
cement
100mm max.
to first track
fixing
Set corners
Bottom track
fastened to floor
with metal fasteners
Stud
GYPROCK
FYRCHEK
plasterboard
FIG Z031: PLASTERBOARD TO MASONRY WALL

INTERSECTION
GYPROCK
FYRCHEK
plasterboard
Fix at 600mm
max. centres
along track
Metal track
fixings
Track

Caulk gap with CSR
Gyprock Fire Mastic equal
to thickness of 1st layer of
plasterboard minimum
GYPROCK
FYRCHEK
plasterboard
Fix end stud to masonry at 6-20mm

500mm maximum vertical
centres
Track
FIG Z029: INTERSECTION DETAIL PLASTERBOARD

WALL
Stud at wall
intersection
Fix studs at 600mm

100mm max.
Metal track
fixings
FIG Z032: ANGLED WALL INTERSECTION DETAIL
ax
Provide full height

sheet support when
wall angle is more
than 25
Track
10
0m
Track
Track fixing 100mm

max. from wall
intersection
Set corners with

paper tape and
cement
100mm max.
to first track
fixing
Metal track
fixings
GYPROCK
FYRCHEK
plasterboard
Fix at 600mm
max. centres
along track
Track
Metal track
fixings
Set corner with

external angle
bead and cement
Set corner with

internal angle
bead and cement
Track
GYPROCK
FYRCHEK
plasterboard
The Red Book
Z7
FIG Z033: WALL/WALL JUNCTION
FIG Z035: TYPICAL LAYOUT FOR STAGGERED STEEL

STUD SYSTEM

GYPROCK
plasterboard
64 mm x 0.75mm
BMT Steel stud
Steel Angle (75 x 75 x

0.7mm BMT) fixed to
stud with panhead screw
at 600mm max. cts
GYPROCK
Plasterboard
92 mm Stud
Wall with required

sound rating
Attach with
plasterboard
laminating screws at
600 mm centres
Tape and
set corners
CSR Gyprock
Staggered Studs
and Clips
FIG Z034: STAGGERED STUD SYSTEM

JUNCTION DETAILS

Finish corners
as required

depth of first layer minimum
CSR Gyprock
Staggered Studs
and Clips
Z8
Wall track fixed to

masonry at 600mm
max. centres
The Red Book
Wall Control Joints

FIG Z036: CONTROL JOINT STEEL OR TIMBER STUD

WALLS WITH GYPROCK PLASTERBOARD LININGS
FIG Z039: CONTROL JOINT FOR SINGLE LAYER WALL

SYSTEMS, STEEL OR TIMBER STUD FRAME
For Rw up to 40, use backing rod only detail.

For Rw greater than 40, use backing rod and sealant detail.
15-20mm
gap
Finish surface
as per external angles
CSR Gyprock Flexible

Sealant (depth equal to
wall lining thickness) for
acoustic integrity
Additional stud to
form control joint
Stud in
normal
position
RONDO P35
Control Joint
16mm GYPROCK FYRCHEK

plasterboard
RONDO P35
Control Joint
or alternative
Backing Rod
non fire rated 22mm dia.
Tracks discontinuous
at control joint
Additional stud to
form control joint
15mm min.
Finish surface
Finish surface
Backing Rod
non fire rated
22mm dia. for
acoustic integrity
15-20mm
gap
FIG Z037: CONTROL JOINT STEEL OR TIMBER STUD

WALLS WITH CSR FIBRE CEMENT WALLBOARD
LINING
For Rw up to 40, use backing rod only detail.
For Rw greater than 40, use backing rod and sealant detail.
Finish surface
RONDO P35
Control Joint
15mm min.
Stud in
normal
position
GYPROCK
Plasterboard
RONDO P35
Control Joint
15-20mm
gap
CSR Gyprock Flexible

Sealant (depth equal to
wall lining thickness) for
acoustic integrity
Additional stud to
form control joint
Stud in
normal
position
15-20mm

(depth 20mm min.)
2 x 16mm GYPROCK
20mm min.
RONDO P35
Control Joint
or alternative
Backing Rod
non fire rated
22mm dia.
Stud in
normal
position
at control joint
Additional stud to
form control joint
Cemintel
Wallboard
Backing Rod
non fire rated
22mm dia. for
acoustic integrity
15-20mm
gap
13mm GYPROCK
FIG Z040: CONTROL JOINT FOR DOUBLE LAYER WALL

SYSTEMS STEEL OR TIMBER STUD FRAME
20mm min.
Finish surface
Finish surface

(depth 15mm min.)
15-20mm
2 x 13mm GYPROCK
FIG Z041: CONTROL JOINT FOR COMPOSITE WALL

SYSTEMS STEEL OR TIMBER STUD FRAME
(Maintains FRL of the wall system in which it is installed).
FIG Z038: CONTROL JOINT AT INTERSECTION OF

MASONRY AND STEEL STUD WALL
Fill gap with CSR
Gyprock Flexible
sealant for acoustic
integrity
CSR Gyprock Sealant

(full depth of wall lining
materials)
Stud in normal
position
RONDO Stopping
Bead and set over
Additional stud to
form control joint
IBS Rod 22mm dia.
Track
Backing Rod 22mm dia.

non fire rated
Do not fix
plasterboard
to end stud
10mm
100 to 150mm
The Red Book
13 or 16mm GYPROCK
at control joint
10mm
Cemintel
Wallboard
CSR Gyprock Fire

Mastic (full depth of wall
lining materials)
Z9
Ceiling Control Joints

FIG Z042: CONTROL JOINT PARALLEL TO STEEL
FRAMING 1 LAYER
FIG Z045: CONTROL JOINT PERPENDICULAR TO

STEEL FRAMING 1 LAYER
(Maintains FRL of the ceiling system in which it is installed).
Continuous back-block of
GYPROCK FYRCHEK same
thickness as ceiling sheet
Fix one side of back-block

with laminating screws at
600mm max. centres or
plaster based adhesive
60 to 70mm
Furring
Channel

Back-block between furring

channel with GYPROCK
FYRCHEK same thickness
as ceiling sheet
Rondo N140 Track
200mm min.
Furring Channel
RONDO P35
Control Joint
with set finish
15 to 20mm gap
1 layer GYPROCK
FYRCHEK
plasterboard screw
fixed to furring
channel each side of
joint at 200mm max.
centres
RONDO P35
Control Joint
with set finish
15 to 20mm gap
GYPROCK FYRCHEK
plasterboard fixed to
N140 Track at 200mm
max. centres

FRAMING 2 LAYERS

STEEL FRAMING 2 LAYERS
Furring
Channel

with CSR Gyprock
of first layer minimum
60 to 70mm

as ceiling sheet

with CSR Gyprock
Furring Channel
Joiner N138
200mm min.
Furring Channel
RONDO P35
Control Joint
with set finish
15 to 20mm gap
2 layers GYPROCK
FYRCHEK
plasterboard screw
fixed to furring each
side of joint at 200mm
max. centres
RONDO P35
Control Joint
with set finish
15 to 20mm gap
GYPROCK FYRCHEK
plasterboard fixed with
laminating screws to
layer above at 200mm
max. centres

FRAMING 3 LAYERS

STEEL FRAMING 3 LAYERS
Furring
Channel
each side
of joint
RONDO P35
Control Joint
with set finish

with CSR Gyprock
60 to 70mm


with CSR Gyprock
200mm min.
Furring Channel
15 to 20mm gap
3rd layer of GYPROCK
fixed with laminating screws
Z10

as ceiling sheet
1st and 2nd layers of

GYPROCK FYRCHEK
plasterboard fixed to
furring at 200mm max.
centres
RONDO P35
Control Joint
with set finish
15 to 20mm gap
2nd and 3rd layers of

GYPROCK FYRCHEK
plasterboard fixed with
laminating screws to
layer above at 200mm
max. centres
The Red Book
FIG Z048: CONTROL JOINT PARALLEL OR

PERPENDICULAR TO TIMBER OR STEEL FRAMING
2 LAYERS
FIG Z051: CONTROL JOINT PARALLEL OR

PERPENDICULAR TO TIMBER OR STEEL FRAMING
3 LAYERS
Continuously and
completely fill gap
with CSR Gyprock
Fire Mastic
NOTE: Control Joint must be

placed centrally between joists
when installed parallel to framing
1 layer GYPROCK
continuous across joint
200mm max. centres
RONDO
Stopping Bead
with set finish
NOTE: Control Joint must be

placed centrally between joists
when installed parallel to framing
10 to 12mm gap
NOTE: Aluminium Foil

must be placed under
joist where control joint is
perpendicular to framing.
Refer to FIG Z041.
Continuously and
completely fill gap
with CSR Gyprock
Fire Mastic
2 layers GYPROCK
continuous across joint
200mm max. centres
NOTE: Aluminium Foil must

be placed under joist where
control joint is perpendicular
10 to 12mm gap to framing. Refer to FIG Z044.
RONDO
Stopping Bead
with set finish
FIG Z049: CONTROL JOINT PARALLEL TO TIMBER

FRAMING 2 LAYERS

TIMBER FRAMING 2 LAYERS
Back-block between trimmers

with GYPROCK FYRCHEK same
200mm max. centres


with CSR Gyprock
200mm max. centres
Trimmers at 450mm
max. centres
Joist
Joist
RONDO P35
Control Joint
with set finish
200mm min.
GYPROCK
FYRCHEK
plasterboard
15 to 20mm gap
300mm min.
Joist
200mm min.

with CSR Gyprock
GYPROCK
FYRCHEK
plasterboard
15 to 20mm gap
RONDO P35
Control Joint
with set finish
200mm max. centres
200mm max. centres
Aluminium Foil under joist,

300 x 150 x 0.15mm
FIG Z050 CONTROL JOINT PARALLEL TO TIMBER

FRAMING 3 LAYERS

TIMBER FRAMING 3 LAYERS

Fix back-block to ceiling sheet
with plaster based adhesive
or laminating screws


with CSR Gyprock
Continuously fill gap with CSR

Gyprock Fire Mastic to depth
of one layer minimum
Fix back-block to ceiling sheet

with plaster based adhesive
or laminating screws
Trimmers at 450mm
max. centres
300mm min.
Joist
RONDO P35
Control Joint
with set finish
200mm min.
15 to 20mm gap
Joist
GYPROCK
FYRCHEK
plasterboard
Fix 2nd and 3rd layers to

preceeding layer with
laminating screws at 200mm
max. centres
The Red Book
Joist
200mm min.
15 to 20mm gap
RONDO P35
Control Joint
with set finish
Aluminium Foil under joist,
300 x 150 x 0.15mm
GYPROCK
FYRCHEK
plasterboard
Fix 2nd and 3rd layers to

preceeding layer with
laminating screws at
200mm max. centres
Z11
Ceiling Perimeter Details

Fire Rated Details
At fire rated ceiling/wall junctions, ceiling framing is required to support the plasterboard as detailed in FIG Z101 to FIG Z130.
To seal the junction between the ceiling and wall, one of the caulking details FIG Z140 to FIG Z147 must be used. The junction
detail should be selected with regard to appearance and acoustic integrity.
FIG Z100: CEILING PERIMETER FRAMING AND CAULKING SELECTION
Step 1:
Step 2:
Choose a suitable
ceiling perimeter
framing detail.
Refer to
FIG Z101
to
FIG Z130
Choose a suitable
perimeter caulking
detail.
Refer to
FIG Z140
to
FIG Z147
CEILING PERIMETER FRAMING AT JUNCTION WITH TIMBER FRAMED WALL

FIG: Z101
FIG: Z102
600mm max.
Ceiling Joist
Angle may be
required as backing
for caulking
1 or 2 layers of
GYPROCK FYRCHEK
Refer to FIG Z100

NOTE: Caulking of the
ceiling perimeter may
be necessary before
fixing wall linings
GYPROCK
Plasterboard
1 or 2 layers of
GYPROCK FYRCHEK
Packer to suit
Non fire
rated or
lower
rated
timber
wall
system
Rondo Wall Track fixed at

600mm max. centres
Blocking to suit FRL. Refer to 'National
Association of Forest Industries Ltd'
publication 'MRTFC'
GYPROCK
Plasterboard
FIG: Z103
FIG: Z104
600mm max.
200mm max.
Ceiling Joist
1, 2 or 3 layers of
GYPROCK FYRCHEK
50x50mm Plasterers Steel

Angle or Wall Track fixed at
600mm max. centres
Refer to FIG Z100

NOTE: Caulking of the
ceiling perimeter may
be necessary before
fixing wall linings
Z12
GYPROCK
Plasterboard
1, 2 or 3 layers of
GYPROCK FYRCHEK
Non fire
rated or
lower
rated
timber
wall
system

600mm max. centres
Blocking to suit FRL up to 90/90/90
Refer to 'National Association of Forest
Industries Ltd' publication 'MRTFC'
GYPROCK
Plasterboard
The Red Book
CEILING PERIMETER FRAMING AT JUNCTION WITH FIRE RATED STEEL FRAMED WALL
FIG: Z111
FIG: Z112
600mm max.
200mm max.
1, 2 or 3 layers of
GYPROCK FYRCHEK
600mm max. centres with
metal fasteners

metal fasteners
1, 2 or 3 layers of
GYPROCK FYRCHEK
Fire rated
wall system
Refer to FIG Z100
FIG: Z113
FIG: Z114
600mm max.
1, 2 or 3 layers of
GYPROCK FYRCHEK
Steel Track fixed at

600mm max. centres
Refer to FIG Z100
Steel Angle or Track fixed

Fire rated
wall system
FIG: Z115
FIG: Z116
200mm max.
600mm max.
1, 2 or 3 layers of
GYPROCK FYRCHEK
Steel Angle fixed at
metal fasteners
Refer to FIG Z100
The Red Book
1, 2 or 3 layers of
GYPROCK FYRCHEK
Steel Angle fixed at

metal fasteners
1, 2 or 3 layers of
GYPROCK FYRCHEK
Fire rated
wall system
Z13
CEILING PERIMETER FRAMING AT JUNCTION WITH MASONRY WALL

FIG: Z121
FIG: Z122
Wall track or angle fixed at

metal fasteners
1, 2 or 3 layers of
GYPROCK FYRCHEK
Masonry
wall system
600mm max.
1, 2 or 3 layers of
GYPROCK FYRCHEK
Refer to FIG Z100
FIG: Z123
FIG: Z124
600mm max.
Refer to FIG Z100
Ceiling Joist
Angle may be required

as backing for caulking
1, 2 or 3 layers of
GYPROCK FYRCHEK
Packer to suit
Continuous strip of 16mm
GYPROCK FYRCHEK
1, 2 or 3 layers of
GYPROCK FYRCHEK
Rondo Wall Track

Masonry
wall system
FIG: Z125
FIG: Z126
600mm max.
Refer to FIG Z100
Ceiling Joist
1, 2 or 3 layers of
GYPROCK FYRCHEK
Angle may be
required as backing
for caulking
Wire Mesh (galvanised)
nailed to wall plate
Render
Z14
Packer to suit
Masonry
wall system
1, 2 or 3 layers of
GYPROCK FYRCHEK
Rondo Wall Track

Render
The Red Book
CEILING PERIMETER FRAMING AT JUNCTION WITH MASONRY WALL
FIG: Z127
FIG: Z128
600mm max.
Refer to FIG Z100
Ceiling Joist
1, 2 or 3 layers of
GYPROCK FYRCHEK
Angle may be
required as backing
for caulking
Gyprock Masonry Adhesive
(large daubs to bridge cavity)
Packer to suit
Masonry
wall system
GYPROCK
Plasterboard CD
1, 2 or 3 layers of
GYPROCK FYRCHEK
Rondo Wall Track

GYPROCK
Plasterboard CD
FIG: Z129
FIG: Z130
600mm max.
200mm max.
Masonry
wall system
1, 2 or 3 layers of
GYPROCK FYRCHEK
1, 2 or 3 layers of
GYPROCK FYRCHEK
metal fasteners
Refer to FIG Z100
The Red Book

metal fasteners
Z15
Caulking Details for Fire Rated Ceilings

P e r i m e t e r c a u l k i n g d e t a i l s Z 1 4 0 t o Z 1 4 7 w i l l m a i n t a i n t h e F R L o f t h e C S R G y p ro c k c e i l i n g s y s t e m s
in which they are installed. Assessment FCO 0609
FIG: Z143
Suitable for 2 and 3 layer plasterboard ceiling systems.

6mm gap min.
Framing to appropriate detail
10mm
min.
Wall System
Wall System
FIG: Z140
Backing rod
(non fire rated)
Continuously fill gap at
edge of sheet with
min. 16mm depth

edge of all sheets with
FIG: Z141
FIG: Z144
Suitable for 1, 2 and 3 layer plasterboard ceiling systems.
Wall System
Wall System
6mm gap min.

Shadowline stopping bead

Rondo P50

vermiculite plaster

edge of sheet with
min. 16mm depth
Tape and set joint
FIG: Z145

6mm gap min.

Wall System
Wall System
FIG: Z142
6mm max. gap

Trowel on a continuous
25 x 25mm fillet
of Vermiculite plaster
Timber moulding
Vermiculite plaster
FIG: Z146
FIG: Z147

NOTE: This detail is not suitable were acoustic integrity is required.

NOTE: This detail is not suitable were acoustic integrity is required.
70mm max.
Masonry
wall system
Z16
Wall Angle Trim

Rondo DUO 5 fixed to
wall with metal
fasteners at 600mm
max. centres
Wall System
6mm gap
max.
Shadowline stopping bead

Rondo P50
22mm IBS rod
NOTE: Wall surface

behind angle must be
flush. Fill any raked
joints behind angle.
The Red Book
Service Penetrations
The acoustic performance of walls and ceilings can be
reduced by penetrations for plumbing, electrical switches,
light fittings, etc. For construction that is acoustically
sensitive, it is recommended that, wherever possible, such
penetrations are avoided. In other cases, rated proprietary
sealants and products should be used.
There is a wide range of services and materials that may
be required to penetrate sound rated walls and ceilings,
and in varied configurations and concentrations. CSR
recommends that an acoustic engineer be consulted for
advice on all details for projects with specific acoustic
objectives.
Fire and acoustic rated switch boxes are available from
manufacturers such as PROMAT, CLIPSAL and HPM to
assist in maintaining the acoustic integrity of wall systems.
Wall system CSR 075 has been tested without penetrations,
and also in the configuration shown in FIG Z201, using
PROMAT fire rated switch boxes. An acoustic performance
of Rw52 was recorded in both cases. (CSIRO Nth Ryde Test
N HAS 029). Designers should contact the manufacturer
for performance in other walls and configurations. CSR
recommends that wherever electrical penetrations are
made, 75mm CSR Bradford Glasswool Partition batts be
incorporated in the wall cavity to assist acoustic integrity.
Refer to FIG Z201 & Z203.
As an alternative to fire and acoustic rated power boxes,

standard power points can be installed using the Gyprock
Silencer. This reduces the labour intensive cutting and
caulking requirements of many other systems. Refer to FIG
Z202.
The acoustic performance of four power points back to
back in CSR 295(b) was evaluated by testing at CSIRO
and no reduction in Rw occurred up to Rw 60. Refer to FIG
Z204.
Plumbing penetrations such as taps and shower roses in
walls can also be contained in the Gyprock Silencer. This
can maintain the acoustic separation of the wall as above,
and provides effective rating of plumbing noise to adjacent
areas. Refer to FIG Z205.
FIG Z201: ACOUSTIC TEST CONFIGURATION USING

FIRE RATED SWITCH BOXES
Fire rated Switch Boxes
(Test conducted with
Fyreguard electrical
switch boxes)
75mm Bradford Glasswool

Partition Batts

plasterboard each side of 64mm steel
studs at 600mm centres
FIG Z200: GOOD ACOUSTIC DESIGN PRACTICE FOR SERVICES

Concrete Slab
Water supply
Gyprock
Silencer
Gyprock
Silencer
Gyprock
Silencer
Where possible, run plumbing

services vertically from outlets
into ceiling or floor space
Mixer
only
Water supply
The Red Book
Concrete Slab
Power supply
Z17
For bulkhead and ceiling systems to protect against

noise generated by services, refer to Section F Service
Systems. These systems may incorporate a number of
standard downlights equally spaced over any 5m2 area.
Where a higher concentration of downlights is required,
sound rated downlights such as Regal R1012/FRD can
be used. Designers should contact the manufacturer for
performance and installation details. Refer to FIG Z224.
FIG Z203: TYPICAL POWER OUTLET/LIGHT SWITCH

INSTALLATION USING FIRE RATED SWITCH BOX
Stud
Fire Rated Switchbox

Seal cable penetration as
per switch box
manufacturers requirements
Seal around cutout
with CSR Gyprock
Fire Mastic
FIG Z202: GYPROCK SILENCER

(recommended to assist
acoustic integrity of wall
system)
Deflection
gap
Silencer inside
track and held by
Rondo clip
GYPROCK FYRCHEK
plasterboard (number of
layers and thickness in
accordance with wall
system specifications)
Head
Track
Fire Performance
Gyprock
Silencer
Service penetrations in fire rated walls and ceilings that

can be effectively rated include electrical and data cables,
switches and GPOs, hydraulic pipes, vents and mechanical
ducts. Access panels and control joints can also be installed
with appropriate fire resistance levels.
Power outlets and light switches can be installed in fire
rated walls using either fire rated switch boxes or with
standard switches within a Gyprock Silencer . When
installed correctly, these methods can maintain the FRL of
the wall system in which they are installed.
Base Track
or Angle
Gyprock
Silencer
Screw fix Gyprock Silencer

to base track or angle
50mm
200mm
50mm
The fire resistance of electrical penetrations was tested at

the CSR Research NATA Laboratory. Standard power points
were positioned back to back within Gyprock Silencers
without degrading the fire resistance of the wall system up
to /120/120. (CSIRO assessment FCO 2039). Taps and
similar plumbing penetrations can also be installed in the
Silencer for the same rating.
Where fire and acoustic rated switch boxes are specified,
refer to the manufacturer for appropriate products and
installation details.
Metal pipe penetrations may be treated as per BCA
deemed-to-satisfy details or in accordance with a
proprietary assessed detail. These details typically involve
mastic sealants. Plastic pipes, and pipes with insulation
lagging, are usually treated with fire collars in accordance
with manufacturers details, in both walls and ceilings.
Some assessed details and typical details for proprietary
treatment of penetrations are included. Additional
information can be found in relevant Gyprock installation
manuals, and refer to the appropriate product manufacturer.
Z18
The Red Book
Penetration Details
FIG Z204: TYPICAL ELECTRICAL SERVICES
INSTALLATION WITH GYPROCK SILENCER
FIG Z206: PIPE PENETRATION THROUGH WALL

(Up to FRL /120/. Appraisal: WRFA C91409)
Up To FRL /120/120. Appraisal: FCO 2039
GYPROCK
Plasterboard CD
General purpose
power outlet
CSR Gyprock
Fire Mastic
thickness 15mm
min.
Where wall
system has only
one layer of
GYPROCK
FYRCHEK,
provide extra
200mm wide
border and fix
with laminating
screws
20mm
25mm
150mm max.
Gyprock
SecurityWall
Panel
CSR Gyprock
Fire Mastic
GYPROCK FYCHECK
Plasterboard
Gyprock
Silencer
Steel or copper
metal pipe
system, 1.5mm
min. wall
thickness
2 layer
GYPROCK
FYRCHEK
wall system
FIG Z205: TYPICAL PLUMBING SERVICES

INSTALLATION WITH GYPROCK SILENCER
Up To FRL /120/120. Appraisal: FCO 2039
10mm GYPROCK plasterboard
strip (600 x 200mm) to one side.
Screw fix to Silencer, centered
on penetration with screws at
300mm centres.
Omit for FRL /90/90
GYPROCK
FYCHECK MR
Plasterboard
FIG Z207: ACCESS PANEL IN WALL
Wall studs and noggings

around cutout
Fire rated access

panel installed to
manufacturers
details
One layer 16mm

GYPROCK FYRCHEK
fixed to studs and
noggings around cutout
GYPROCK
AQUACHEK
plasterboard
The Red Book
Mixer
tap set
Gyprock
Silencer
GYPROCK FYRCHEK
fixed to studs and
noggings around cutout
at 150mm maximum
centres
Set over stopping bead

around opening
Z19
FIG Z208: CABLE TRAY AND CABLES
FIG 210: TYPICAL PVC PIPE PENETRATION
FRL /120/120. Appraisal: FSP 0087 (PROMAT)

GYPROCK
Plasterboard
wall with
required fire
rating
GYPROCK
FYRCHEK
Electrical
Cables
Cable
Tray
PVC pipe
CSR Gyprock Fire

Mastic 3mm
minimum thickness
and 30mm overlap
on board face
16mm
Proprietary
Fire Collar
IBS strips
50 x 19mm
16mm
16mm

overlapping face of board
minimum 30mm around
penetration
FIG 211: TYPICAL PVC PIPE PENETRATION RETROFIT

FIRE COLLAR
16mm
Fill all gaps with CSR

Gyprock Fire Mastic

Fire rated wall
to system
specification
Fire rated
sealant as per
system
specification
PROMAT
Fyre Collar
fixed to support
framing
GYPROCK
FYRCHEK
wall lining
Cable Tray
PVC Pipe
PROMAT
Fyre Collar
fixed to support
framing
IBS strips
50 x 19mm
FIG Z209: CABLING (UP TO 3 CORE + EARTH)

FRL /120/60. Appraisal: WFRA C91409
Where wall system has only
one layer of FYCHEK, provide
extra 200mm wide border and
fix with laminating screws
25mm
25mm
GYPROCK
FYRCHEK
1 or 2
layers
10-30mm
CSR Gyprock
Fire Mastic
Z20
The Red Book
Fire Damper Penetrations in Walls

Detail FIG Z212 is suitable for dampers rated up to FRL /120/. Duct weight must not be supported by the wall. For full
specifications and installation details, refer to the appropriate damper manufacturer.
FIG Z212: INSTALLATION DETAIL FOR FIRE DAMPER IN STUD WALL SYSTEM
Appraisal: PROMAT FCO 2106
Boxed studs
Deflection Head
Track fixed to studs
Promaseal IBS backing
than gap (gap 15-30mm).
Promaseal Acrylic Mastic
over (5mm min. depth)
Caulk between
plasterboard and
damper body sides
with Promaseal
Acrylic Mastic 5mm
min. depth
Mechanical fire
damper tested and
approved for
AS1530.4
1 or 2 layers
GYPROCK
FYRCHEK
Plasterboard as
per FRL
Damper seal angles
75 x 50 x 1.2mm MS
Boxed studs
Deflection Head
Track fixed to studs
FIG Z213: INSTALLATION DETAIL FOR LORIENT LVH44 FIRE DAMPER

FRL /120/. Appraisal: FCO 1869/2276 LORIENT
Ductwork branch
mechanically fixed to
sheetmetal riser with
rivets or tek screws
CSR Gyprock Laminated

Service System
Duct breakaway connection
in accordance with AS1682.2
Perimeter of fire damper

sealed with Lorient
Intumescent Mastic
Lorient LVH44 Intumescent Fire

Damper unit (nom. 300 x 300mm)
Sheetmetal
Riser
Sheetmetal ductwork
Perimeter of duct sealed with
Lorient Intumescent Mastic
The Red Book
Z21
FIG Z214: INSTALLATION DETAIL FOR FIRE DAMPER IN SHAFT WALL SYSTEM
FRL /120/. Appraisal: CSIRO FCO 2109
1500mm max.
J-Track fixed to studs
Promaseal IBS backing

than gap (gap 15-30mm)
J-Track
Mechanical fire
damper tested and
approved for
AS1530.4
10mm dia. MS rod

fixed to slab and
support angle
1400mm max.
Damper seal angles

75mm x 50mm x
1.2mm MS
Support angle 50mm

x 50mm x 5mm MS
1 or 2 layers GYPROCK
as per FRL
GYPROCK Shaft
Liner Panel
FIG Z215: TYPICAL INTUMESCENT FIRE DAMPER

Steel studs
at 600mm
centres
Rondo angles
mechanically
fixed to studs
GYPROCK
FYRCHEK
plasterboard
Steel studs at
600mm centres
Proprietary
intumescent
damper
Spigot to terminate
with break joint
Perimeter gaps sealed

Steel studs
at 600mm
centres
Z22
The Red Book
FIG Z216: TYPICAL FIRE HATCH IN CEILING
FIG Z219: BACK-BLOCKING OF ELECTRICAL

PENETRATION ON CEILING
FRL 60/60/60. Appraisal: FCO 0609
Ceiling Joists/Trimmers around

all sides of opening
Fire rated access panel installed
to manufacturers specifications
Two 100 x 100mm

blocks of 16mm
GYPROCK
FYRCHEK
Ceiling cut-out equal

to hatch frame size
GYPROCK FYRCHEK
plasterboard ceiling lining
Recess 1st block

to accommodate
wiring
FIG Z217: TYPICAL AIR CONDITIONING DAMPER TO

CEILING
AC Duct and Damper
supported independently
to ceiling system
Ceiling
suspension
system
FIG Z220: RECESSED LIGHT CAVITY IN TIMBER FRAME

FRL 60/60/60. Appraisal: FCO 0609
Timber flooring
Fire Damper
Floor Joist
Fire Damper
Frame
GYPROCK FYRCHEK
plasterboard layers
and thickness
appropriate for system
Trimmers
50 x 50mm min.
Top Cross Rail

Part N128
Air Diffuser
Volume Dampers
Furring Channel
Part N129
1 or 2 layers of GYPROCK
FIG Z218: PROMAT FIRE SPRING CEILING

INSTALLATION.
60 minutes RISF. Appraisal: WRFA C91409
FIG Z221: RECESSED LIGHT BOX IN SUSPENDED

STEEL FRAME CEILING
FRL 60/60/60. FCO 0609
(*Components not supplied by CSR)
CSR Gyprock
Fire Spring
*Protection box
CSR Gyprock
Fire Mastic
Stirrup fabricated
from stud or furring
*Cup head bolts and N226 clips
85 x 7mm
*Light fitting
support
450mm
141mm
127mm
50 50
7mm
Two layers
16mm
GYPROCK
FYRCHEK
*Support
250 x 50 x 3mm
285mm
2 layer x 16mm
GYPROCK FYRCHEK
*Light trim
The Red Book
Z23
FIG Z222: COPPER PIPE PENETRATION THROUGH

CEILING.
FIG Z225: HANDRAIL ATTACHMENT
PROMAT. FRL 60/60/60. Appraisal: WRFA 1606
Wall Studs
IBS Strip
50 x 20mm
Timber
support
plate
520mm high
wire mesh
Shield,
200mm
diameter
1, 2 or 3 layers
of GYPROCK
FYRCHEK
plasterboard
6mm
15mm min.
100mm max.
Gyprock Fire
Mastic
GYPROCK Fyrchek lining

to system requirements
Wafer head
screw
Fix with max. 10g

screws to timber
support plate
Hand rail or similar light

weight attachment
FIG Z226: HANDRAIL ATTACHMENT ALTERNATIVE

METHOD
FIG Z223: TYPICAL PVC PIPE PENETRATION
THROUGH CEILING
Wall Studs
Installation must be to fire rated collar manufacturers specifications.

Timber
support
plate
Additional support
framing if required
Rondo Nogging
Bracket No.501
PVC Pipe
Wafer head
screw
Fix with max. 10g

screws to timber
support plate
GYPROCK Fyrchek lining

to system requirements
Hand rail or similar light

weight attachment
1, 2 or 3 layers
of GYPROCK
FYRCHEK
plasterboard
Fire collar
fixed to
support
framing
FIG Z224: TYPICAL FIRE RATED DOWNLIGHT
Z24
The Red Book
Section IN
Index
Contents
Index to Systems
The Red Book
IN2 IN3
IN1
Index to System Numbers

System N
Page N
System N
Page N
System N
Page N
System N
Page N
System N
Page N
005
B9
126
B43
248
B36
362
C13
535
D15
010
B9
127
B43
249
B36
363
C13
540
D12
011
B9
128
B43
250
B17
364
C13
541
D12
015
B9
129
B43
255
B18
368
C14
542
D12
025
B9
131
B14
257
E16
369
C14
543
D12
032
B9
132
B15
258
E16
370
C14
544
D13
033
B10
135
B14
259
E16
371
C14
545
D13
035
B10
136
B34
260
E16
372
C14
548
D12
038
B11
137
B34
261
E16
375
C9
549
D13
039
B10
138
B34
262
E16
380
C9
550
C10
040
B11
139
B34
263
E17
386
C20
551
D13
043
B13
140
B35
264
E17
387
C20
553
C10
044
B13
141
B35
265
E17
388
C20
555
C10
045
B13
142
B35
266
E17
389
C20
556
C11
046
B13
143
B35
267
E17
390
C21
557
E22
048
B13
150
B15
275
B19
391
C21
559
E22
049
B13
152
B15
280
B19
392
C21
560
E22
050
B11
153
B15
284
B27
393
C21
561
E22
055
B11
155
B15
285
B27
403
C18
562
E22
060
B28
165
B40
290
B25
406
C18
563
E23
061
B28
166
B39
291
B25
407
C18
564
E23
062
B28
167
B40
292
B25
410
C18
565
E23
065
E31
168
B40
293
B25
411
C18
566
E23
066
E31
170
B41
294
B26
414
C19
567
E23
067
E31
171
B41
295
B26
415
C19
575
C12
068
E31
175
B16
296
B27
419
C19
579
C11
069
E31
178
B41
297
B26
422
C15
580
C12
070
E32
179
B41
298
B27
425
C15
582
C12
071
E32
180
B16
305
C6
430
C16
600
B10
072
E32
184
B45
310
C6
450
C16
601
B10
073
E32
185
B45
311
C6
455
C16
605
B10
075
B12
186
B45
315
C6
457
E20
606
B11
080
B12
187
B45
320
C6
458
E20
610
B12
085
B30
192
B46
322
C6
459
E20
611
B12
086
B30
193
B46
325
C7
460
E20
613
B12
089
B30
195
B46
326
C7
461
E20
614
B12
090
B30
196
B46
327
C7
462
E20
615
B11
091
B30
204
B17
330
C7
463
E21
630
B15
092
B31
206
B18
335
C7
464
E21
631
B14
093
B31
207
B17
337
E18
465
E21
632
B14
100
B23
208
B17
339
E18
466
E21
652
C9
101
B23
212
B19
340
E18
467
E21
653
C8
102
B23
216
B19
341
E18
475
C17
660
C8
103
B23
217
B18
342
E18
480
C17
661
C15
110
B14
218
B18
343
E19
493
C31
662
C15
111
B24
222
B20
344
E19
494
C31
663
C16
113
B24
223
B20
345
E19
496
C31
664
C16
114
B24
225
B20
346
E19
498
C31
665
C9
115
B24
226
B20
347
E19
526
D14
666
C16
118
B42
230
B21
350
C8
527
D14
667
C9
119
B42
231
B21
352
C8
528
D15
670
C17
120
B42
235
B21
354
C7
530
D14
671
C17
121
B42
240
B22
354
C8
531
D14
672
C17
122
B42
241
B22
355
C8
532
D14
674
C10
123
B42
243
B22
360
C13
533
D14
675
C10
125
B14
244
B22
361
C13
534
D15
677
C10
IN2
The Red Book
System N
Page N
System N
Page N
System N
Page N
System N
Page N
System N
Page N
678
C11
816
E9
876
E27
680
C11
817
E9
877
E33
959
E18
FP62
G14
967
B33
FP63
681
C11
818
E9
878
G14
E33
968
B33
FP75
682
C11
819
E9
G15
880
E33
969
B33
FP80
690
C28
820
G16
E7
885
E8
970
B32
FP82
693
C28
G16
821
E10
886
E8
971
B32
FP84
694
G17
C29
822
E11
888
E8
977
B32
FP86
G17
695
C29
823
E10
890
E37
981
E34
FP88
G18
696
C28
824
E10
891
E30
982
E34
G17
697
C29
825
E11
892
E30
983
E34
698
C29
826
E11
893
E30
985
E34
722
D20
827
E11
894
E30
986
E34
723
D20
828
E11
896
E30
987
E35
724
D20
829
E11
898
E30
992
E35
730
D19
831
E12
900
C22
993
E35
731
D19
832
E12
901
C22
994
E35
732
D19
833
E12
902
C24
995
E35
FP90
HEBEL
1000/1001
HEBEL
1006/1007
HEBEL
1030/1031
HEBEL
1032/1033
HEBEL 1302
E35
HEBEL 1303
D18
B52
HEBEL 1304
D18
B48
HEBEL 1305
D18
B48
HEBEL 1306
D18
HEBEL 1400
C25
737
738
739
760
D6
D8
D8
D6
834
835
836
837
E12
E13
E13
E13
903
905
905
906
C24
C24
C30
C22
997
EC031
EC105
EC110
D16
D17
D16
D17
D18
761
D6
838
E13
906
C24
EC115
B48
762
D6
839
E13
907
C22
EC205
B49
Hebel 1404
B44
B49
HEBEL 1600
E36
E36
763
D7
841
E14
908
C22
EC210
764
D7
842
E26
909
C22
EC215
B49
HEBEL 1635
765
D7
843
E26
911
C23
EC220
B50
SS01
F4
766
D7
844
E27
912
C23
EC225
B51
SS02
F4
767
D8
845
E14
920
C26
EC230
B51
SS04
F4
768
D8
846
E14
921
C27
EC305
B48
SS08
F5
769
D8
847
E15
923
C26
EC310
B49
SS10
F5
774
D9
848
E15
924
C26
EC315
B49
SS11
F5
775
D9
849
E15
925
C26
EC320
B50
SS12
F5
776
D10
850
E28
927
C26
EC325
B51
SS13
F5
777
D10
851
E28
928
C27
EC605
B48
SS17
F5
778
D11
852
E28
932
B39
EC615
B49
SS18
F6
779
D11
853
E28
933
B38
EC620
B48
SS19
F6
780
D9
854
E28
934
B38
FP01
G3
SS20
F6
781
D9
855
E29
935
B39
FP02
G3
SS21
F6
783
D10
856
E29
936
C30
FP03
G4
SS22
F6
784
D10
857
E29
937
B44
FP04
G4
SS23
F6
787
D11
858
E29
940
B37
FP10
G5
SS30
F7
788
D11
859
E29
941
B37
FP11
G5
SS31
F7
795
D21
860
E31
941
B37
FP16
G6
SS32
F7
796
D21
862
E26
945
B29
FP17
G6
SS34
F7
797
D21
863
E26
946
B29
FP20
G7
SS38
F7
798
D21
864
E26
947
B29
FP21
G7
SS39
F7
805
E7
865
E33
948
E24
FP25
G8
SS40
F8
806
E7
866
E33
949
E24
FP26
G8
SS41
F8
807
E7
867
E27
950
E24
FP31
G9
SS42
F8
808
E7
868
E26
951
E24
FP35
G9
SS44
F4
809
E7
870
E25
952
E24
FP40
G10
SS45
F4
810
E8
871
E25
953
E24
FP45
G10
SS46
F4
811
E8
872
E33
954
E25
FP50
G11
812
E8
873
E33
955
E25
FP55
G12
814
E9
874
E27
956
E25
FP60
G13
815
E9
875
E27
958
E22
FP61
G13
The Red Book
IN3
GYP500 | November 2011
The Red Book
Health & Safety
Contact Details
Information on any known health risks of our products and

how to handle them safely is on their package and/or the
documentation accompanying them.
CSR Gyprock Web Site
Additional information is listed in the Material Safety Data

sheet. To obtain a copy, telephone 1800 807 668.
Disclaimer
This guide is current at September 2011 and supersedes
all previous versions of the Fire and Acoustic Design Guide.
CSR has taken all reasonable care in producing this guide,
however CSR makes no representations or warranties,
express or implied, as to the accuracy, reliability or
completeness of the guide, and disclaims all liability, direct
or indirect (and whether or not arising out of the negligence,
default or lack of care of CSR) for any loss or damage
(whether foreseeable or not) suffered by the recipient or
any other person arising out of, or in connection with, any
use or reliance by any of them on the guide. Liability which
cannot legally be excluded is limited to the maximum extent
possible.
Information including acoustic and fire rating has been
sourced from recognised third parties and is current at
the time of printing. Systems, Standards and Building
Codes are subject to change. To ensure the information
is current, check the websites www.gyprock.com.au and
www.cemintel.com.au or contact CSR.
The guide is copyright CSR Limited (A.B.N 90 000 001 276)
and its related bodies corporate (CSR). Copyright 2011.
www.gyprock.com.au
CSR Cemintel Web Site
www.cemintel.com.au
CSR Gyprock Sales Support
Telephone: 13 17 44
Facsimile: 1800 646 364
CSR designLINk Technical Support Service
Telephone: 1800 621 117
Facsimile: 1800 069 904
Email: [email protected]
New South Wales and ACT
376 Victoria Street, Wetherill Park NSW 2164
Queensland
768 Boundary Road, Coopers Plains QLD 4108
Victoria
277 Whitehall Street, Yarraville VIC 3013
South Australia
Lot 100 Sharp Court, Mawson Lakes SA 5095
Western Australia
21 Sheffield Road, Welshpool WA 6106
Tasmania
PO Box 61, Glenorchy TAS 7010
Northern Territory
Cnr Stuart Hwy & Angliss St, Berrimah NT 0828
The following are trade marks of CSR Limited and are under license. CSR,
Gyprock, Supaceil, Soundchek, Aquachek, Impactchek, Superchek,
Fyrchek, FyrchekMR, ECO8, Bradford, designLINK, Cemintel,
SeminSeal, RendaLine, StrataWall, ExpressWall.
Publication GYP500.BMS9600.1111

GYPROCK 500 Red - Book 2011 PDF

Uploaded by

Copyright:

Available Formats

GYPROCK 500 Red - Book 2011 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GYPROCK 500 Red - Book 2011 PDF

Uploaded by

Copyright:

Available Formats

What products does CSR produce?

What products does CSR produce?

What guarantees does CSR provide for its Gyprock products?

What guarantees does CSR provide for its Gyprock products?

The Red Book

FIRE & ACOUSTIC DESIGN GUIDE

Including Green Building Systems

You can be sure with CSR

The Red Book

Steel Stud Wall Systems

Timber Stud Wall Systems

Masonry Wall Systems

Flanking Path Systems

Junctions & Penetrations

The Red Book

How to Use The Red Book

Section Index Page A3

Steel Stud Wall Systems

Timber Stud Wall Systems

Masonry Wall Systems

Flanking Path Systems

Junctions & Penetrations

An index of all systems

The Red Book

System Tables Sections B, C, d, e & F

The Red Book

Steel Frame Internal Wall Systems Single Stud

System number and icon illustration.

TYPICAL LAYOUT (CSR 010a shown)

Lining material as per system table.

Check for appropriate fire rating (FRL) if required.

Lining material as per system table.

Acoustic performance valid for studs 0.50 BMT.

Check for appropriate acoustic performance (Rw/Rw+Ctr) if required.

Check System Specifications for elements common to the systems.

Acoustic Opinion or Test references information.

(c) 75 GW Partition 11kg

(d) TSB3/ASB3 Polyester

Check for alternative systems on the same and adjacent pages.

Relevant selection and design information is provided at the beginning of each

200mm minimum cavity.

(c) 75 GW Partition 11kg

(d) TSB3/ASB3 Polyester

35/27 37/30 37/30 38/31 41/34

(b) 50 GW Partition 11kg

39/29 41/32 42/33 43/34 45/36

(c) 75 GW Partition 14kg

44/35 44/35 45/36 47/38

39/31 40/33 41/34 42/35 44/37

42/32 43/33 44/34 46/36

38/30 39/32 40/33 42/35 45/38

(b) 50 GW Partition 11kg

43/33 44/35 45/36 47/38 49/40

(e) 60 Soundscreen 1.6

46/37 46/37 48/39 50/41

43/35 43/36 44/37 46/39 48/41

45/35 46/36 48/38 50/40

35/28 37/30 38/31 40/33 43/37

(b) 50 GW Partition 11kg