Scribd
Upload
108 views2 pages

Design of Shear Connector For Composite Bending Action

This document discusses the design of shear connectors for composite beams. It provides the design calculations for determining the shear force, properties of the girder section, properties of the concrete slab, geometry of the composite section, and properties of the shear studs. It then sizes the welds required to attach the studs based on permissible stresses. The provided spacing of the shear studs is determined to provide sufficient longitudinal shear strength for the composite beam.

Uploaded by

ankit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
108 views2 pages

Design of Shear Connector For Composite Bending Action

This document discusses the design of shear connectors for composite beams. It provides the design calculations for determining the shear force, properties of the girder section, properties of the concrete slab, geometry of the composite section, and properties of the shear studs. It then sizes the welds required to attach the studs based on permissible stresses. The provided spacing of the shear studs is determined to provide sufficient longitudinal shear strength for the composite beam.

Uploaded by

ankit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

9.

8 DESIGN OF SHEAR CONNECTOR


9.8.1 Design of shear connector for composite bending action
Design shear force
depth of deck slab in terms of steel
width of deck slab in terms of steel

V
b
d
Ac
G
yc
Q
I
VL

Area of conc. (transformed to steel)


c.g of deck slab
dist. From c.g of composite section to c.g of conc.
First moment of area
moment of area of area of composite section
Longitudinal shear
Girder properties
Sec. type
b
short term
360
Long term
180

d
225
225

c.g (G) (mm)


459.23
445.8

Ac(mm2)
81000
40500

9.8.2 Design shear force


Type of section used
Width of flange
Thk. Of flange
Thk. Of web
Area of one stud
Grade of steel
Ultimate strength
partial factor of safety
Permissible shear stress
ultimate static strength of shear connector
spacing of shear connector
max spacing of shear connector
provided spacing of shear connector
Shear capacity of connector
Longitudinal shear strength of connector

9.8.3 Design of weld


Size of weld
Permissible stress in fillet weld
Throat size
Partial factor of safety
length of weld required

Yc(mm)
346.73
333.3

Fy
Fu

Qu
SL

Q
28085130
13498650

kN

2240

ISMC 150
mm
75
mm
9
mm
5.4
mm2
2088
Mpa
250
Mpa
410
1.1
N/mm2
158.776
kN
231
mm
8.1
mm
189.0
mm
8.1
kN
274.0
Kn/mm
33.9
safe

mm
N/mm2
mm
Shop weld
Site weld
Shop weld
Site weld

I
2200000000
2100000000

mm
mm

8
115.5
5.7
1.25
1.5
2091.3
2509.5

Q/I
1.28E-02
6.43E-03

chapter-1

IRC 22-2008 cl.606


.4.1

kN
mm
mm
mm2
mm
mm
mm3
mm4
V*Q/I

VL(kN/mm)
28.60
14.40

You might also like