Scribd
Upload
917 views1 page

NT33

The NT33 power supply module supplies 3.3V/10A, 5.1V/15A, 24V/4A, 24V/30A (55A for 5 seconds), 36V/3A (4A for 20 seconds), and 36V/4A (5A for 10 seconds). It connects to the backplane like a circuit board and can be started by bridging the remote pins of the unmounted supply using the head of an M5 hex screw, which is visible by the starting of the fans.

Uploaded by

megarscout2010
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
917 views1 page

NT33

The NT33 power supply module supplies 3.3V/10A, 5.1V/15A, 24V/4A, 24V/30A (55A for 5 seconds), 36V/3A (4A for 20 seconds), and 36V/4A (5A for 10 seconds). It connects to the backplane like a circuit board and can be started by bridging the remote pins of the unmounted supply using the head of an M5 hex screw, which is visible by the starting of the fans.

Uploaded by

megarscout2010
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Print Media Academy Chapter 5: Hardware in detail Flat modules 

5.1.1 G1 NT 33
Power supply
The NT33 is connected to the back plane like a PCB. The following power is supplied: 3.3V / 10 A; 5.1V / 15 A
incl. 3.3V; 24.0V L / 4 A; 24.0 V / 30 A (55 A / 5 sec.); 36.0 V SS 3 A ( 4 A / 20 sec.); 36.0 V FS 4 A (5 A / 10 sec.).

Connecting this 2 remote pins of an


unmounted power supply starts it.
(Recognizable by the starting fans.)

Power supply NT 33

A head of a M5 hex-screw
can be used for bridging
the remote pins

Fans
start

A
Mains
plug at the
frontside

Issue date: July 2007


Bjrn Albien SE-CP4
Roland Woldag SE-CP4

ba

ck

si

de

You might also like