This document summarizes the key topics covered in a tutorial on three-phase circuits, including:
1) The possible connections for three-phase generators and loads.
2) What is meant by a "balanced" three-phase system.
3) The relationship between phase and line voltages/currents in wye and delta connections.
4) Phase sequence and Y-Δ transforms.
5) Example calculations for line currents, power, and voltages in various three-phase circuit configurations.
This document summarizes the key topics covered in a tutorial on three-phase circuits, including:
1) The possible connections for three-phase generators and loads.
2) What is meant by a "balanced" three-phase system.
3) The relationship between phase and line voltages/currents in wye and delta connections.
4) Phase sequence and Y-Δ transforms.
5) Example calculations for line currents, power, and voltages in various three-phase circuit configurations.
This document summarizes the key topics covered in a tutorial on three-phase circuits, including:
1) The possible connections for three-phase generators and loads.
2) What is meant by a "balanced" three-phase system.
3) The relationship between phase and line voltages/currents in wye and delta connections.
4) Phase sequence and Y-Δ transforms.
5) Example calculations for line currents, power, and voltages in various three-phase circuit configurations.
This document summarizes the key topics covered in a tutorial on three-phase circuits, including:
1) The possible connections for three-phase generators and loads.
2) What is meant by a "balanced" three-phase system.
3) The relationship between phase and line voltages/currents in wye and delta connections.
4) Phase sequence and Y-Δ transforms.
5) Example calculations for line currents, power, and voltages in various three-phase circuit configurations.
1. What types of connections are possible for three-phase generators and loads? 2. What is meant by the term balanced in a balanced three phase system? 3. What is the relationship between phase and line voltages and currents in a wye connection? 4. What is the relationship between phase and line voltages and currents in a delta connection? 5. What is phase sequence? 6. What is a Y transform? 7. A 4157-Vrms, three-phase supply is applied to a balanced Y-connected three-phase load consisting of three identical impedances of 4836.87 . Taking the phase to neutral voltage Van as reference, calculate a) The phasor currents in each line b) The total active and reactive power supplied to the load [50-36.87 A, 50-156.87 A, 50-276.87 A, 288 kW, 216 kvar] 8. A balanced delta connected load of 15 + j18 per phase is connected at the end of a three-phase line as shown below. The line impedance is 1 + j2 per phase. The line-to-line voltage of 207.85-V rms. Taking Van as reference, determine the following: a) Current in phase a b) Total complex power supplied from the source c) Magnitude of the line-to-line voltage at the load terminal
[12-53.13 A, 432053.13 VA, 162.33 V]
D. Johari, FKE UiTM
Electrical Power and Machines EPE491
9. Based on figure shown below, determine
a) Phase voltage and currents in load 1 and 2 b) The real, reactive and complex power supplied by the generator when switch S1 is open c) The real, reactive and complex power supplied by the generator when switch S1 is closed
