0% found this document useful (0 votes)
40 views1 page

Refraction of A Light Ray

The refractive index is a number that describes how light propagates through a medium compared to a vacuum. It is defined as the ratio of the speed of light in a vacuum to the speed of light in the medium. The refractive index determines how much light is bent when entering a material, as described by Snell's law of refraction. It also determines the amount of light that is reflected and the critical angle for total internal reflection.

Uploaded by

Ashay Verma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
40 views1 page

Refraction of A Light Ray

The refractive index is a number that describes how light propagates through a medium compared to a vacuum. It is defined as the ratio of the speed of light in a vacuum to the speed of light in the medium. The refractive index determines how much light is bent when entering a material, as described by Snell's law of refraction. It also determines the amount of light that is reflected and the critical angle for total internal reflection.

Uploaded by

Ashay Verma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

In optics, the refractive index or index of refraction n of a material is a dimensionless

number that describes how light propagates through that medium. It is defined as
where c is the speed of light in vacuum and v is the phase velocity of light in the medium. For
example, the refractive index of water is 1.333, meaning that light travels 1.333 times faster
in a vacuum than it does in water.

Refraction of a light ray

The refractive index determines how much light is bent, or refracted, when entering a
material. This is the first documented use of refractive indices and is described by Snell's
law of refraction, n1 sin1 = n2 sin2, where 1 and 2 are the angles of incidence and
refraction, respectively, of a ray crossing the interface between two media with refractive
indices n1 and n2. The refractive indices also determine the amount of light that
is reflected when reaching the interface, as well as the critical angle for total internal
reflection andBrewster's angle.[1]
The refractive index can be seen as the factor by which the speed and the wavelength of the
radiation are reduced with respect to their vacuum values: the speed of light in a medium
is v = c/n, and similarly the wavelength in that medium is = 0/n, where 0 is the wavelength
of that light in vacuum. This implies that vacuum has a refractive index of 1, and that
the frequency (f = v/) of the wave is not affected by the refractive index.
The refractive index varies with the wavelength of light. This is called dispersion and causes
the splitting of white light into its constituent colors inprisms and rainbows, and chromatic
aberration in lenses. Light propagation in absorbing materials can be described using
a complex-valued refractive index.[2] The imaginary part then handles the attenuation, while
the real part accounts for refraction.
The concept of refractive index is widely used within the full electromagnetic spectrum,
from X-rays to radio waves. It can also be used with wavephenomena such as sound. In this
case the speed of sound is used instead of that of light and a reference medium other than
vacuum must be chosen.[3]

You might also like