Scribd Logo
Upload

Welcome to Scribd!

  • 514 views

    075 Rolling Contact Bearing 1,2

    Uploaded by

    rip111176
    This document contains two examples of machine design problems involving the calculation of load capacities for ball bearings. The first example calculates the dynamic load capacity needed for a bearing subjected to a 4000N radial load to achieve a 12,000 hour life at 95% reliability. The calculated capacity is 48.19kN. The second example involves selecting a bearing to withstand multiple cyclic loads - 6000N at 150rpm, 7500N at 600rpm, and 2000N at 300rpm - over an expected life of 2500 hours. Through calculations, the total revolutions are found to be 48.37 million and bearing number 6016 with a 49.40kN capacity is determined to be suitable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    075 Rolling Contact Bearing 1,2

    Uploaded by

    rip111176
    514 views4 pages
    This document contains two examples of machine design problems involving the calculation of load capacities for ball bearings. The first example calculates the dynamic load capacity needed for a bearing subjected to a 4000N radial load to achieve a 12,000 hour life at 95% reliability. The calculated capacity is 48.19kN. The second example involves selecting a bearing to withstand multiple cyclic loads - 6000N at 150rpm, 7500N at 600rpm, and 2000N at 300rpm - over an expected life of 2500 hours. Through calculations, the total revolutions are found to be 48.37 million and bearing number 6016 with a 49.40kN capacity is determined to be suitable.

    Original Description:

    rolling bearing

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains two examples of machine design problems involving the calculation of load capacities for ball bearings. The first example calculates the dynamic load capacity needed for a bearing subjected to a 4000N radial load to achieve a 12,000 hour life at 95% reliability. The calculated capacity is 48.19kN. The second example involves selecting a bearing to withstand multiple cyclic loads - 6000N at 150rpm, 7500N at 600rpm, and 2000N at 300rpm - over an expected life of 2500 hours. Through calculations, the total revolutions are found to be 48.37 million and bearing number 6016 with a 49.40kN capacity is determined to be suitable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    514 views4 pages

    075 Rolling Contact Bearing 1,2

    Uploaded by

    rip111176
    This document contains two examples of machine design problems involving the calculation of load capacities for ball bearings. The first example calculates the dynamic load capacity needed for a bearing subjected to a 4000N radial load to achieve a 12,000 hour life at 95% reliability. The calculated capacity is 48.19kN. The second example involves selecting a bearing to withstand multiple cyclic loads - 6000N at 150rpm, 7500N at 600rpm, and 2000N at 300rpm - over an expected life of 2500 hours. Through calculations, the total revolutions are found to be 48.37 million and bearing number 6016 with a 49.40kN capacity is determined to be suitable.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Mechanical Engineering Department

    Government Engineering College Dahod


    Subject:- Machine Design
    Batch:- 75(Mech-B)

    BE SEM VII

    EXAMPLE ; 1
    A ball bearing subjected to a radial load of 4000 N is expected to have a satisfactory life of 12000
    hour at 720RPM with a reliability 95% . Calculate the dynamic load carrying capacity of the bearing so
    that it can be selected form manufacturing catalogs based on 90% reliability. If there are bearing
    reliability of 95% in system.
    Solution;
    Given data.
    Pr= 4000N

    n=720RPM

    Lh10= 12000 hours

    Ka = 1.5

    Equivalent dynamic load ;


    Pe= Pr. Ka
    =4000 1.5
    =

    6000N
    L10 =

    1060
    1000000

    1200060720
    1000000

    = 518.4 million revolution.


    Using load life relationship.
    For ball bearing a=3
    10


    =[ ]

    3
    518.4 = [
    ]
    6000
    1

    = (518.4)3 6000
    = 48.19
    Substituting following values
    L=518.4 million rev
    L10=558.11

    Page 1|4

    Mechanical Engineering Department


    Government Engineering College Dahod
    Subject:- Machine Design
    Batch:- 75(Mech-B)

    BE SEM VII

    Ras=0.95
    B=2.2
    10
    =[

    3
    =[ ]

    49.40 3
    ]
    6000

    = 558.11
    1


    )
    [ ] =(
    1
    10

    0.95
    1

    518 2.2
    )
    [
    ] =(
    1
    558

    0.95
    0.8490 =

    1

    0.022

    1
    = 0.01891

    1
    = 1.090

    = 98.12%

    Example; 2 A rolling contact bearing is subjected to following work cycles


    1.Radial load of 6000N at 150rpm for 25% of the time
    2.Radial load of 7500N at 600rpm for 20% of the time
    3.Radial load of 2000N at 300rpm for 55% of the time
    The inner ring rotates and the loads are steady. select the bearing for expected life of
    2500hrs.
    Solution
    Page 2|4

    Mechanical Engineering Department


    Government Engineering College Dahod
    Subject:- Machine Design
    Batch:- 75(Mech-B)

    BE SEM VII

    Given data
    Pe1=6000N
    Pe2=7500N
    Pe3=2000

    N1=150rpm=0.25 cycle
    N2=600rpm=0.2 cycle
    N3=300rpm=0.55 cycle
    Lhrs=2500 hrs
    1 =

    10 60 1
    106

    0.25 2500 60 150


    100000

    = 5.62 rev
    2 =
    =

    10 60 2
    106

    0.2 2500 60 600


    1000000

    = 18 rev
    3 =
    =

    10 60 3
    106

    0.55 2500 60 300


    1000000
    = 24.75

    10 = 1 + 2+N3
    =48.37 million rev
    For No 6016

    C=49.40kN

    Page 3|4

    Mechanical Engineering Department


    Government Engineering College Dahod
    Subject:- Machine Design
    Batch:- 75(Mech-B)

    BE SEM VII

    For No 6216

    C=72.80kN

    For No 6316

    C=13.00kN

    For No 6416

    C=16.3kN

    Bearing no 6016 is suitable for capacity of 4940 kN

    Page 4|4

    You might also like