Flywheel Horsepower

PC200 Gross: 110 kW 147 HP / 2000 min-1

Net: 103 kW 138 HP / 2000 min-1
PC220 Gross: 129 kW 173 HP / 2000 min-1
Net: 123 kW 164 HP / 2000 min-1
operating weight
PC200-8M0: 21000 21200 kg
PC200LC-8M0: 21700 22000 kg

PC200/LC-8M0
PC220/LC-8M0

PC220-8M0: 24100 24500 kg

PC220LC-8M0: 25100 25500 kg

PC

200 220

Australian - NZ Specification

HYDRAULIC EXCAVATOR
Photos may include optional equipment.

PC200-8M0
PC220-8M0

H y draul i c E x c avat or

hydraulic excavator

PC200-8M0
PC220-8M0

WALK-AROUND

Information &
Communication Technology

Ecology and Economy Features

Low fuel consumption by total
control of the engine, hydraulic
and electronic system.

Large multi-lingual high resolution

LCD monitor

Fuel consumption reduced by approx. 7%

on PC200-8M0 (compared with the PC200-8)
and by approx. 5% on PC220-8M0
(compared with the PC220-8)

Low emission engine

A powerful, turbocharged and air-to-air

Supports efficiency improvement

Equipped with the fuel pre-filter as standard (with water separator)

Equipped with the EMMS

monitoring system

Side-by-side cooling concept enables individual cooling modules to

be serviced.

See page 8.

See page 9.

Factory designed and fitted to support local requirements and reduce

delivery lead times

 Economy mode improves fuel

consumption.

Enables compliance to local legislation and site safety standards

See page 10.

 ECO-gauge for energy-saving operations

Safety Design

Low operation noise

Using the low-noise engine and

ROPS cab (ISO 12117-2) for

protecting the operator in the
event of a roll-over

See pages 4 and 5.

Slip-resistant plates for

improved foot grip

Large Comfortable Cab

Rear view monitoring system

for viewing the work area to
the rear of the machine

Low-noise cab, similar to passenger

car

Remote mounted engine oil filter and fuel drain valve for easy access

Unique specification developed specifically for the Australian and

New Zealand market

EPA Tier 3 and EU Stage 3A emissions

equivalent.

methods to cut noise at source.

Long replacement interval of engine oil, engine oil filter and

hydraulic filter

Komatsu Australia Ltd Standard Specification

(KALSS)

aftercooled Komatsu SAA6D107E-1

provides 103 kW 138 HP on PC200-8M0
and 123 kW 164 HP on PC220-8M0

 Extended idling caution for fuel

conservation

Easy Maintenance

See page 7.

Low vibration with cab damper

mounting
Highly pressurized cab to minimise
dust ingress
Operator seat and console with
armrest that enables operations in
the appropriate operational posture.
See page 6.

Photo may include optional equipment.

PC200-8M0
PC220-8M0

H y draul i c E x c avat or

hydraulic excavator

PC200-8M0
PC220-8M0

ECOLOGY & ECONOMY FEATURES

Komatsu Technology

Seven-inch TFT liquid crystal display

Hydraulic control valve
Flow divide/merge control
with EPC

Low Emission Engine

Working Modes Selectable

Komatsu SAA6D107E-1 reduced NOx emission

This excavator is equipped with six working modes (P, E, L, B, ATT/P

by 29% compared with the PC200-7 & PC220-7.

and ATT/E mode). Each mode is designed to match engine speed

This engine is EPA Tier 3 and EU Stage 3A

and pump output to the application. This provides the flexibility to

emissions equivalent.

match equipment performance to the job at hand.

Hydraulic system
controller

Working Mode

components, such as engines, electronics and

hydraulic components, in house.
With this Komatsu Technology, and adding
customer feedback, Komatsu is achieving great
advancements in technology.
To achieve both high levels of productivity and
economical performance, Komatsu has developed
the main components with a total control system.
The result is a new generation of high performance

Electronic control
unit for engine

Main pump
Two pump independent control

Engine
Heavy duty High Pressure
Common Rail (HPCR) system

Low Operation Noise

Enables a low noise operation using the low-noise engine and
methods to cut noise at source.

and environment-friendly excavators.

Low Fuel Consumption

Reduced fan speed

Large capacity radiator
V shape type fin
Low-noise shroud

The newly-developed Komatsu

SAA6D107E-1 engine enables NOx
emissions to be significantly reduced with
the accurate multi-staged fuel injection
by the engine controller. It improves total
engine durability using the high-pressure
fuel injection system developed specifically

Low-noise muffler
Electronically controlled
common rail type engine
Multi-staged injection
Highly rigid cylinder block

for construction machinery. This excavator

Maximum production/power
Fast cycle times

E
Economy mode

Good cycle times

Better fuel economy

Suitable attachment speed

matching techniques of the engine and

Idling Caution

hydraulic unit and also provides features

To prevent unnecessary fuel

Fuel consumption

7% reduced

Fuel consumption

consumption, an idling
caution is displayed on the
monitor, if the engine idles
for 5 minutes or more.

vs. PC200-8

Breaker mode

Optimum engine rpm,

hydraulic flow

Attachment

ATT/P
Power mode

Optimum engine rpm,

hydraulic flow, 2way
Power mode

Attachment

ATT/E
Economy mode

Optimum engine rpm,

hydraulic flow, 2way
Economy mode

P
E
L
B

P mode
E mode
L mode
B mode

ATT/ P

ATT/P mode

ATT/ E

ATT/E mode

Lifting Mode
When the Lifting mode is selected, lifting capacity is increased 7%
by raising hydraulic pressure.

Eco-gauge that Assists Energy-saving Operations

on the right of the multi-function color monitor for environment-

consumption using the highly-efficient

such as the E mode and ECO-gauge.

Lifting mode

Equipped with the Eco-gauge that can be recognized at a glance

significantly reduces hourly fuel

that promote energy-saving operations

Optimal arrangement
of sound absorbing
materials

Advantage

P
Power mode

Komatsu develops and produces all major

Application

friendly energy-saving
operations. Allows focus
on operation in the green
range with reduced CO2
emissions and efficient
fuel consumption.

5% reduced

vs. PC220-8

Photo may include optional equipment.

Based on typical work pattern collected via

KOMTRAX.
Fuel consumption varies depending on job
conditions.

PC200-8M0
PC220-8M0

H y draul i c E x c avat or

hydraulic excavator

PC200-8M0
PC220-8M0

WORKING ENVIRONMENT
Safety Design
ROPSCab

Lock Lever

The machine is equipped with a ROPS cab that conforms to ISO

Locks the hydraulic

12117-2 for excavators as standard equipment. The ROPS cab has

pressure to prevent

high shock-absorption performance, featuring excellent durability

unintentional

and impact strength. It also satisfies the requirements of ISO OPG

movement. Neutral start

top guard level 1 for falling objects. Combined with the retractable

function allows

seat belt, The ROPS cab protects the operator in case of tipping

machine to be started

over and against falling objects.

only in lock position.

Large Side-view, and Sidewise Mirrors

Enlarged left-side mirror and addition of sidewise mirror allow the
PC200/LC-8M0 & PC220/LC-8M0 to meet the new ISO visibility
requirements.

Low Cab Noise

Wide Newly-designed Cab

Automatic Air Conditioner

The newly-designed cab is highly rigid and

Newly-designed wide spacious cab

Enables you to

has excellent sound absorption ability.

includes seat with reclining backrest. The

easily and

Thorough improvement of noise source

seat height and longitudinal inclination are

precisely set

reduction and use of low noise engine,

easily adjusted using a pull-up lever. You

cab atmosphere

hydraulic equipment, and air conditioner

can set the appropriate operational

with the

allows this machine to generate a low

posture of armrest together with the

instruments on the large LCD.

level of noise.

console.

The bi-level control function keeps

Reclining the seat further enables you to

the operator's head and feet cool and

place it into the fully flat state with the

warm respectively. This improved air

headrest attached.

flow function keeps the inside of the

Low Vibration with Cab Damper

Mounting
PC200/LC-8M0 & PC220/LC-8M0 uses

cab comfortable throughout the year.

viscous damper mounting for cab that

Defroster function keeps front glass clear.

Rear View Monitoring System

The operator can view the rear of the machine with a color
monitor screen.

Rear view image on monitor

incorporates longer stroke and the addition

of a spring. The new cab damper mounting

Slip-resistant Plates

combined with high rigidity deck aids

Highly durable

vibration reduction at operator seat.

slip-resistant plates
maintain superior
traction performance

rubber
spring
silicon
oil

for the long term.

Pressurized Cab
Optional air conditioner, air filter and
a higher internal air pressure minimize
external dust from entering the cab.

Thermal and Fan

Guards
Thermal and fan guards
are placed around hightemperature parts of the
engine and fan drive.

Pump/engine
Room Partition
Pump/engine room partition prevents oil from spraying onto the
engine if a hydraulic hose should burst.

PC200-8M0
PC220-8M0

H y draul i c E x c avat or

hydraulic excavator

INFORMATION & COMMUNICATION TECHNOLOGY

1

Basic
operation
switches

Function
switches

MAINTENANCE FEATURES

Large Multi-lingual High Resolution

LCD Monitor

Side-by-side Cooling

Sloping Track Frame

Since radiator, aftercooler and oil cooler

Easy Access to Engine Oil Filter

and Fuel Drain Valve

A large user-friendly high resolution LCD color

are arranged in parallel, it is easy to

Engine oil filter and fuel drain valve are

and allows easy mud removal.

monitor enables safe, accurate and smooth

clean, remove and install them. Radiator,

remote mounted to improve accessibility.

work. Visibility and resolution are further

aftercooler, and oil cooler made of

improved compared with current 7-inch

aluminum have high cooling efficiency

Gas Assisted Engine Hood

Damper Cylinders

large TFT LCD.

and are easily recycled.

The engine hood can be easily opened

and closed with the assistance of the

keys facilitate multi-function operations.

gas assisted

Displays data in 13 languages to globally

engine hood

support operators around the world.

damper

cylinders.

TFT : Thin Film Transistor

LCD : Liquid Crystal Display

Equipped with the Eco-drain

Valve as Standard.

Indicators

Prevents clothes and the ground from

Equipped with the Fuel Pre-filter

(with Water Separator)

Uses high-performance filtering materials

when replacing the engine oil.

and long-life oil. Extends the oil and filter

replacement interval.

Removes water and

Engine oil &

Engine oil filter

contaminants in the

Basic operation switches

1

fuel to prevent fuel

problems. (With built-

in priming pump)

Hydraulic oil
Hydraulic oil filter

Washable Cab
Floormat

Large-capacity Fuel Tank and

Rustproof Treatment

operations as needed. The operator can use the ECO Guidance

The cab floormat is easy to keep clean.

400-litre high-capacity fuel tank.

menu to check the Operation Records, ECO Guidance Records,

Controller monitors engine oil

The gently inclined surface has a

Effective corrosion resistance using

Average Fuel Consumption Logs, etc.

level, coolant temperature,

flanged floormat and drainage holes

rustproof treatment.

The main screen displays advices for promoting energy-saving

battery charge air clogging,

Long-life Oil, Filter

becoming contaminated due to oil leakage

Equipment Management Monitoring System

(EMMS)
Monitor Function

Supports Efficiency Improvement

Prevents dirt and sand from accumulating

Simple and easy to operate switches. Function

Air conditioner
operation
switches

PC200-8M0
PC220-8M0

500 hours
every 5000 hours
every 1000 hours
every

Air Conditioner Filter

The air conditioner filter is removed and
installed without the use of tools facilitating
filter maintenance.

to facilitate runoff.

etc. If the controller finds any

abnormality, it is displayed on
the LCD.

Maintenance Function

Internal air conditioner External air conditioner

filter
filter

The monitor informs

replacement time of oil
and filters on the LCD when
the replacement interval
is reached.

Trouble Data Memory

Function
Monitor stores abnormalities for effective troubleshooting.

9
Photo may include optional equipment.

PC200-8M0
PC220-8M0

H y draul i c E x c avat or

kalss

hydraulic excavator

australian Standard Specification

engine

Level Indicator
Overload Alarm
Boom and Arm
Anti-Burst Valves
Enable compliance when
lifting suspended loads.

Additional Mirrors
and Lighting
For improved visibility
and illumination
OPG Level 2 Top Guard
(ISO 10262)
For falling object protection.
Rotating Amber Beacon
Fitted with factory guard.

Rock Guard
Reinforced steel plate and
ribs to provide additional
protection of arm structure.

Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D107E-1

Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled
Number of cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 mm
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 mm
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.69 L
Horsepower:
SAE J1995
PC200/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gross 110 kW 147 HP
PC220/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gross 129 kW 173 HP
ISO 9249 / SAE J1349
PC200/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Net 103 kW 138 HP
PC220/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Net 123 kW 164 HP
Rated rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 min-1
Fan drive method for radiator cooling. . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical
Governor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic
EPA Tier 3 and EU Stage 3A emissions equivalent.

Hydraulics

Heavy-Duty
Boom and Arm
With continuous
plates and cast
tips to provide
increased
durability and
reliability.

High Capacity
Air Conditioner
With increased
cool down
performance.

Factory Fitted
Quick Hitch and
Hammer Piping
Enable use with a
greater variety of
attachments.
Photo may include
optional equipment.

Track Frame and Revolving

Frame Under Cover
Prevents ingress of material into
slew ring area and engine bay.
Lower Windscreen Guard
Protects cabin windscreen
against rocks and debris.

10

PC200-8M0
PC220-8M0

E-Stops
Allow compliance to site
safety requirements with
standard factory wiring for
trouble free operation.

Bump Rails
For upper structure protection
when slewing.

Specification also includes factory fitted provisions for fire extinguishers, turbo timer, UHF and vandal covers to enable ease and reduce cost of local fitment.

Type. . . . . . . . . HydrauMind (Hydraulic Mechanical Intelligence New Design)

system, closed-center system with load sensing valves and
pressure compensated valves
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Main pump:
Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Variable displacement piston type
Pumps for. . . . . . . . . . . . . . . . . Boom, arm, bucket, swing, and travel circuits
Maximum flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 L / min
Supply for control circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Self-reducing valve
Hydraulic motors:
Travel . . . . . . . . . . . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake
Swing. . . . . . . . . . . . . . . . . . . 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.3 MPa 380 kg/cm2
Travel circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.3 MPa 380 kg/cm2
Swing circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.9 MPa 295 kg/cm2
Pilot circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kg/cm2
Hydraulic cylinders:
(Number of cylinders bore x stroke x rod diameter)
Boom
PC200/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . 2 120 mm x 1334 mm x 85 mm
PC220/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . 2 130 mm x 1335 mm x 90 mm
Arm
PC200/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . 1135 mm x 1490 mm x 95 mm
PC220/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . 1145 mm x 1635 mm x 100 mm
Bucket
PC200/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . 1115 mm x 1120 mm x 80 mm
PC220/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . 1130 mm x 1020 mm x 90 mm

Drives and brakes

Steering control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull
PC200/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 kN 18200 kg
PC220/LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 kN 20570 kg
Gradeability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35
Maximum travel speed: High. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 km/h
(Auto-Shift)
Mid (PC200/LC-8M0). . . . . . . . . . . . . . . . . . . . 4.1 km/h

Mid (PC220/LC-8M0). . . . . . . . . . . . . . . . . . . . 4.2 km/h
(Auto-Shift)
Low (PC200/LC-8M0). . . . . . . . . . . . . . . . . . . . 3.0 km/h

Low (PC220/LC-8M0). . . . . . . . . . . . . . . . . . . . 3.1 km/h
Service brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake

swing system
Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Swing reduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Swing circle lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Service brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Holding brake/Swing lock. . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake
Swing speed
PC200/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4 min-1
PC220/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.7 min-1

Undercarriage
Center frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Track frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Seal of track. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
Track adjuster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes (each side):
PC200-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
PC200LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
PC220-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
PC220LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Number of carrier rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side
Number of track rollers (each side):
PC200-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PC200LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PC220-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PC220LC-8M0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Coolant and Lubricant
Capacity (refilling)
Fuel tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 L
Coolant
PC200/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.4 L
PC220/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.9 L
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.1 L
Final drive, each side
PC200/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6 L
PC220/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 L
Swing drive
PC200/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 L
PC220/LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2 L
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 L

operating weight

(approximate)

Operating weight includes 5700 mm (PC200/LC-8M0) or 5850 mm (PC220/LC-8M0)

one-piece boom, 2925 mm (PC200/LC-8M0) or 3045 mm (PC220/LC-8M0) arm,
600 mm shoes, rated capacity of lubricants, coolant, full fuel tank, operator,
standard equipment, KGA quick hitch and 1200 mm KGA bucket.
PC200-8M0
PC200LC-8M0
PC220-8M0
PC220LC-8M0

Operating Weight
21200 kg
22000 kg
24400 kg
25500 kg

Ground Pressure
0.50 kg / cm2
0.46 kg / cm2
0.56 kg / cm2
0.52 kg / cm2

Rated capacity
Rated capacity when fitted with 5700 mm (PC200/LC-8M0) or 5850 mm boom
(PC220/LC-8M0), 2925 mm (PC200/LC-8M0) or 3040 mm (PC220/LC-8M0) arm,
600 mm shoes and lifting suspended loads with KGA quick hitch (as per
Australian standards).
PC200-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2150 kg
PC200LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2450 kg
PC220-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2450 kg
PC220LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2850 kg

11

PC200-8M0
PC220-8M0

H y draul i c E x c avat or

hydraulic excavator

PC200-8M0
PC220-8M0

working range

dimensions

Arm Length

2925 mm

Model

3045 mm

Model

PC200/LC-8M0

PC220/LC-8M0

PC200-8M0

PC200LC-8M0

PC220-8M0

PC220LC-8M0

Max. digging height

10000 mm

10000 mm

Overall length

9425 mm

9425 mm

9885 mm

9885 mm

Max. dumping height

7110 mm

7035 mm

Length on ground

4815 mm

5000 mm

5190 mm

5390 mm

Max. digging depth

6620 mm

6920 mm

2970 mm

2970 mm

3185 mm

3185 mm

Max. vertical wall digging depth

5980 mm

6010 mm

Overall width

2800 mm

3080 mm

2980 mm

3280 mm

Max. digging depth of cut for 8' level

6370 mm

6700 mm

Overall height (to top of cab)

3040 mm

3040 mm

3055 mm

3055 mm

Max. digging reach

9875 mm

10180 mm

Ground clearance, counterweight

1085 mm

1085 mm

1100 mm

1100 mm

Max. digging reach at ground level

9700 mm

10020 mm

Ground clearance (minimum)

440 mm

440 mm

440 mm

440 mm

Max. swing radius

3040 mm

3450 mm

Tail swing radius

2750 mm

2750 mm

2940 mm

2940 mm

Track length on ground

3275 mm

3655 mm

3460 mm

3845 mm

Bucket digging force at power max

138 kN
14100 kg

152 kN
15500 kg

Track length

4070 mm

4450 mm

4260 mm

4640 mm

SAE Rating

Overall height (to top of boom)

Arm crowd force at power max

Track gauge

2200 mm

2380 mm

2380 mm

2580 mm

101 kN
10300 kg

119 kN
12100 kg

Width of crawler

2800 mm

2980 mm

2980 mm

3180 mm

Bucket digging force at power max

149 kN
15200 kg

172 kN
17500 kg

Shoe width

600 mm

600 mm

600 mm

600 mm

Grouser height

26 mm

26 mm

26 mm

26 mm

ISO Rating

C
D

Arm crowd force at power max

108 kN
11000 kg

129 kN
13200 kg

Machine cab height

2095 mm

2095 mm

2100 mm

2110 mm

Machine cab width **

2710 mm

2710 mm

2710 mm

2710 mm

Distance, swing centre to rear end

2710 mm

2710 mm

2905 mm

2905 mm

Working range data applicable for machines when fitted with 2925 mm (PC200/LC-8M0) or 3045 mm
(PC220/LC-8M0) arm and 0.8m3 (PC200/LC-8M0) or 1.0m3 (PC220/LC-8M0) SAE heaped factory bucket.

** : Including handrail

11(m)
10
9
8

7
6
5

A
B

4
3
2

A
P

1
0

G .L.

-1

-2

c
O
F

G
K
D ,L

i
J
B

D
c E

-3
-4
-5
-6
-7
-8
11 10 9

1 0

2440

(m)

G
F
12

13

PC200-8M0
PC220-8M0

H y draul i c E x c avat or

hydraulic excavator

standard equipment

lifting capacity WITH LIFTING MODE

A

A: Reach from swing center

B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
Cs: Rating over side
: Rating at maximum reach

Engine:
Additional filter system for poor-quality fuel (water seperator)
Air pre-cleaner
Automatic engine warm-up system
Dry type air cleaner, double element
Engine, Komatsu SAA6D107E-1
Engine overheat prevention system
Large capacity fuel pre-filter
Radiator and oil cooler dust proof net
Side by side coolers
Suction cooling fan

C
Boom: 5700 mm

PC200-8M0
A
B
7.5 m

Shoes: 600 mm triple grouser

7.5 m

Cf

Cs

*2850 kg

*2850 kg

Cf

Bucket: 0.8 m3 SAE heaped (635 kg)

6.0 m
Cs

4.5 m

Cf

Cs

*4050 kg

*4050 kg
*4250 kg

3.0 m

Cf

Cs

*5550 kg

6.0 m

*2750 kg

*2750 kg

*3100 kg

3000 kg

*4250 kg

4.5 m

*2750 kg

2500 kg

4450 kg

2950 kg

*4900 kg

4400 kg

*5550 kg

3.0 m

*2900 kg

2250 kg

4300 kg

2850 kg

*5900 kg

4150 kg

*7750 kg

6600 kg

1.5 m

*3200 kg

2150 kg

4150 kg

2700 kg

6000 kg

3900 kg

9450 kg

6050 kg

1.5 m

Cf

Cs

*11650 kg

*11650 kg

Cf

Cs

0m

3450 kg

2150 kg

4050 kg

2600 kg

5800 kg

3700 kg

9250 kg

5700 kg

*5200 kg

*5200 kg

-1.5 m

3750 kg

2350 kg

4000 kg

2550 kg

5700 kg

3600 kg

9100 kg

5600 kg

*9300 kg

*9300 kg

*5200 kg

*5200 kg

-3.0 m

4450 kg

2850 kg

5700 kg

5700 kg

9150 kg

5650 kg

*14800 kg

11250 kg

*9750 kg

*9750 kg

-4.5 m

6350 kg

4050 kg

*9150 kg

5850 kg

*13100 kg

11600 kg

Boom: 5700 mm

PC200LC-8M0
B
7.5 m

Arm: 2900 mm

MAX

Shoes: 600 mm triple grouser

7.5 m

Cf

Cs

*2850 kg

*2850 kg

Cf

Bucket: 0.8 m3 SAE heaped (635 kg)

6.0 m
Cs

4.5 m

Cf

Cs

*4050 kg

*4050 kg
*4250 kg

3.0 m

Cf

Cs

6.0 m

*2750 kg

*2750 kg

*3100 kg

*3100 kg

*4250 kg

4.5 m

*2750 kg

*2750 kg

*4600 kg

3300 kg

*4900 kg

4900 kg

*5550 kg

*5550 kg

3.0 m

*2900 kg

2550 kg

5000 kg

3200 kg

*5900 kg

4650 kg

*7750 kg

7400 kg

1.5 m

*3200 kg

2450 kg

4850 kg

3050 kg

*7000 kg

4400 kg

*9850 kg

6850 kg

0m

*3700 kg

2450 kg

4750 kg

2950 kg

6800 kg

4200 kg

*10900 kg

6500 kg

4700 kg

2900 kg

-1.5 m

4400 kg

2700 kg

-3.0 m

5250 kg

3250 kg

-4.5 m

*6750 kg

4600 kg

Boom: 5850 mm

PC220-8M0
A
7.5 m

Arm: 3045 mm

MAX

Cf

Cs
*3150 kg

Cf

6350 kg

*9300 kg

*9300 kg

*5200 kg

*5200 kg

*14800 kg

12950 kg

*9750 kg

*9750 kg

*9150 kg

6600 kg

*13100 kg

*13100 kg

4.5 m

Cf

Cs

*4150 kg

*4150 kg

Cf

3.0 m
Cs

*4400 kg

3450 kg

*4300 kg

*4300 kg

*4850 kg

3400 kg

*5100 kg

*5100 kg

3.0 m

*3200 kg

2300 kg

4800 kg

3200 kg

*6400 kg

4800 kg

*8450 kg

7800 kg

1.5 m

3450 kg

2200 kg

4650 kg

3050 kg

6800 kg

4500 kg

10850 kg

7100 kg

0m

3500 kg

2250 kg

4500 kg

2900 kg

6550 kg

4250 kg

10600 kg

6650 kg

-1.5 m

3850 kg

2450 kg

4450 kg

2850 kg

6400 kg

4100 kg

10400 kg

6500 kg

4450 kg

2850 kg

Boom: 5850 mm

B
7.5 m

Arm: 3045 mm

MAX

A
Cf

Cs

*3150 kg

*3150 kg

Cf

Cf

Cs

*10400 kg

4100 kg

10450 kg

6550 kg

*17700 kg

13500 kg

10700 kg

6750 kg

*16500 kg

13900 kg

Cs

*4150 kg

*4150 kg

6.0 m

*3000 kg

*3000 kg

*4400 kg

3950 kg

*4300 kg

*4300 kg

4.5 m

*3050 kg

3000 kg

*4850 kg

3900 kg

*5100 kg

*5100 kg

3.0 m

*3200 kg

2750 kg

*5500 kg

3700 kg

*6400 kg

5500 kg

OPERATOR ENVIRONMENT:
AM / FM radio
Bolt-on top guard
[Operator Protective Guard level 2 (OPG)]
Half height cab front guard
EMMS monitoring system
Large capacity automatic air conditioner
 Multi-function color monitor
 Rear view mirror (RH, LH, sidewise)
Rear view monitoring system
 ROPS cab (ISO 12117-2 and OPG Level 1) with vandal cover provision
Rotating beacon with guard
Seat belt, retractable
 Seat, suspension
OTHER EQUIPMENT:
Counterweight
Electric horn
Level indicator
Rear reflector
Travel alarm
Slip-resistant plates

optional Factory equipment

*10350 kg

*10350 kg

OPERATOR ENVIRONMENT:
Full height cab front guard
[Operator Protective Guard level 2 (OPG)]

WORK EQUIPMENT:
Arms (PC200/LC-8M0)
- 2410 mm arm assembly

Bucket: 1.26 m3 SAE heaped (915 kg)

4.5 m

Cf

Cs

*10400 kg

4250 kg

Shoes: 600 mm triple grouser

Cf

UNDERCARRIAGE:
700 mm triple grouser shoes
800 mm triple grouser shoes
Track roller guards (full length)

6350 kg

6.0 m
Cs

HYDRAULIC SYSTEM:
Arm holding valve
Boom holding valve
Boom and arm burst valve protection
Dual flow hammer piping
Full flow in-line filter
"HydrauMind" closed centre load sensing system
Overload alarm
Power maximizing system
PPC hydraulic control system
Quick hitch piping with safety switch and alarm
Working mode selection system

UNDERCARRIAGE:
600 mm triple grouser shoes
 Hydraulic track adjusters (each side)
Track frame undercover
Track guiding guard, centre section
 Track roller:
- PC200-8M0, 7 each side
- PC200LC-8M0, 9 each side
- PC220-8M0, 8 each side
- PC220LC-8M0, 10 each side

1.5 m

6550 kg

7.5 m

Electrical system:
Auto-decel
Alternator, 24V / 60A
Batteries, 2 X 12V / 120Ah
Emergency stops x 3
Starting motor, 24V / 5.5kW
Voltage reducer 24V to 12V, with socket
Working lights

1 x boom

1 x RH

3 x cab

1 x counterweight

guards and covers:

Bump rails
Engine side covers, perforated
Fan guard structure
Revolving frame under cover

Bucket: 1.26 m3 SAE heaped (915 kg)

6.0 m

2600 kg

2950 kg

*5200 kg

6400 kg

*3000 kg

4150 kg

*5200 kg

10950 kg

*3000 kg

4550 kg

*11650 kg

Cs

*10650 kg

*3050 kg

6350 kg

*11650 kg

Cf

4100 kg

6.0 m

-3.0 m

Cs

4100 kg

4.5 m

-4.5 m

Cf

6700 kg

Shoes: 600 mm triple grouser

Cs

1.5 m

6700 kg

7.5 m

*3150 kg

PC220LC-8M0

14

Arm: 2900 mm

MAX

PC200-8M0
PC220-8M0

3.0 m

Cf

Cs

*8450 kg

*8450 kg

1.5 m

*3550 kg

2600 kg

5650 kg

3550 kg

*7700 kg

5200 kg

*11100 kg

8200 kg

0m

*4100 kg

2650 kg

5500 kg

3400 kg

8000 kg

4950 kg

*12500 kg

7750 kg

1.5 m

Cf

Cs

*10400 kg

-1.5 m

4700 kg

2900 kg

5450 kg

3350 kg

7850 kg

4800 kg

*12850 kg

7600 kg

*10400 kg

-3.0 m

5600 kg

3450 kg

5450 kg

3350 kg

7850 kg

4800 kg

*12650 kg

7650 kg

*17700 kg

16050 kg

-4.5 m

*7750 kg

4800 kg

8000 kg

4950 kg

*11140 kg

7850 kg

*16500 kg

16300 kg

Cf

Cs

*10350 kg

*10350 kg

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

15

www.komatsu.com

ZESS003200-01

Printed in Australia 201501

Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.