ch01 Testbank
ch01 Testbank
ch01 Testbank
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
11. Which action is an awareness level hazardous materials responder qualified to take?
A. Implement protective actions.
B. Assist with decontamination of victims.
C. Conduct searches in a warm zone.
D. Perform reconnaissance from a warm zone.
Ans: A
Page: 8
12. Which action is within the awareness level scope of responsibility?
A. Prepare for emergency decontamination of civilians.
B. Perform passive mitigation.
C. Determine appropriate actions based on the ERG.
D. Perform defensive tactics.
Ans: C
Page: 8
13. According to NFPA standards, which item is a core competency for operations level
hazardous materials responders?
A. Preserve evidence
B. Control leaking product
C. Perform victim recovery
D. Perform atmospheric monitoring
Ans: A
Page: 8
14. According to NFPA standards, which item is a mission-specific competency for
operations level hazardous materials responders?
A. Scene survey and analysis
B. Collection of data from reference sources
C. Selection of the appropriate level of PPE
D. Response to illicit laboratory incidents
Ans: D
Page: 9
15. Which entity determines if a need exists to provide mission-specific competency
training for local operations level hazardous materials responders?
A. The National Fire Protection Association (NFPA)
B. The State Fire Marshal
C. The authority having jurisdiction (AHJ)
D. The Environmental Protection Agency (EPA)
Ans: C
Page: 9
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
21. What law requires businesses that handle chemicals to report type, quantity, and
storage methods to the local fire department?
A. INSTEP
B. HAMSTER
C. ASTHMA
D. EPCRA
Ans: D
Page: 11
22. What is the acronym for the detailed profile of a single chemical or mixture that is
provided by the manufacturer and/or supplier of a chemical and is collected by the LEPC
in a jurisdiction?
A. INSECT
B. MSDS
C. UNLOCK
D. ANDS
Ans: B
Page: 11, 15
23. What does the S stand for in SERC?
A. Special
B. System
C. State
D. Start
Ans: C
Page: 11
24. In general, which type of incident requires the most time, planning, and forethought?
A. Structure fire
B. Hazardous materials incident with rescue
C. Structure fire with rescue
D. Hazardous materials incident with no life hazard
Ans: C
Page: 12
25. Which statement best describes the correct perspective to take at a hazardous
materials/WMD incident?
A. Take aggressive action to minimize the threat.
B. Slow down and think before you act.
C. Contain and confine, but provide for safety first.
D. Risk a lot to save a lot.
Ans: B
Page: 12
26. When does the response to a hazardous materials incident begin?
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
A. Not until everyone is assembled onsite and the planning and evaluation process has
been completed
B. Not until the first person trained in hazardous materials arrives on the scene
C. When the first call is received by the communications center or other agency of
notification
D. With learning about the regulations, agencies involved, and potential hazards in the
jurisdiction
Ans: D
Page: 12
27. Incident planning should focus on both the real threats that exist in the departments
community and:
A. the real threats that exist in adjacent communities the department might assist.
B. threats that are not real today, but that may become real as technology changes.
C. model threats, which exercise all the available resources in a standard set of
circumstances.
D. random threats; always expect the unexpected, especially with the terrorism concerns
of the new millennium.
Ans: A
Page: 13
28. Core competencies of operations level hazardous materials/WMD responders are:
A. offensive.
B. indirect.
C. passive
D. defensive.
Ans: D
Page: 8, 13
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
30. The DOT defines a hazardous materials as one that poses an unreasonable risk when:
A. it is being transported.
B. it is not properly contained or stored.
C. it is used in a reasonable, controlled manner.
D. it is exposed to common environmental conditions.
Ans: B
Page: 5
31. The bulk of the new chemicals introduced each year fall into one of three categories,
two of which are industrial chemicals and household cleaners. What is the third?
A. Medicines
B. Military products
C. Fire suppression agents
D. Lawn care products
Ans: D
Page: 5
32. Which statement best describes how hazardous materials regulations are created?
A. They are created in each fire department separately by that department.
B. They are issued by government bodies such as OSHA.
C. They are formed by participation from industry manufacturers.
D. They are laws, passed by the several states legislatures.
Ans: B
Page: 5
33. What sub-organization within the NFPA produces the hazardous materials/WMD
standards?
A. Technical Committee on Hazardous Materials Response Personnel
B. Special Task Force on Hazardous Materials Substances, Responses, and Disposal
C. Scientific and Technical Committee for Field Applications
D. Study Group on the Integration of Applicable Hazardous Materials Regulations
Ans: A
Page: 6
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
34. Each U.S. state has the right to adopt and supersede safety and health regulations put
forth by federal OSHA. What are the states that choose that option called?
A. OSHA-exempt states
B. State-plan states
C. Sub 6 states
D. Compliant states
Ans: B
Page: 6
35. The NFPA has produced three standards on various aspects of hazardous materials
and emergency responses to them. What is one of these standards?
A. 1901
B. 1002
C. 473
D. 10
Ans: C
Page: 6
36. What level of hazardous materials training enables first responders to recognize a
potential hazardous materials emergency, protect themselves, isolate the area, and call for
assistance?
A. Awareness
B. Operations
C. Scout
D. Field
Ans: A
Page: 6, 8
37. After the initial training requirements, what is the OSHA requirement for refresher
training?
A. There is no requirement for refresher training.
B. Once every two years
C. Annually
D. Annually if no responses occurred during the year
Ans: C
Page: 11
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
38. What committees gather and disseminate information about hazardous materials to
the public?
A. IOSCO regional committees
B. USFA annual planning committees
C. Industry self-monitoring committees
D. Local emergency planning committees
Ans: D
Page: 11
39. The __________ serves as the liaison between local and state levels of authority.
A. local emergency planning committee
B. state emergency response commission
C. federal coordination and reporting hotline
D. regional hazardous materials team
Ans: B
Page: 11
41. In hazardous materials preincident planning, once the agency has identified the
threats in its jurisdiction, what should the agency do next?
A. Take no further action.
B. Determine how it will respond.
C. Run full-scale drill exercises.
D. Run table-top drill exercises.
Ans: B
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
Page: 13
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
10
Page: 10
46. What federal agency enforces and publicizes laws and regulations governing
transportation of goods?
A. OSA
B. OPA
C. DOT
D. DOHA
Ans: C
Page: 11
47. What federal agency regulates and governs issues related to hazardous materials in
the environment?
A. OSHA
B. DOA
C. DOE
D. EPA
Ans: D
Page: 11
49. What NFPA standard addresses competencies for emergency medical personnel
working a hazardous materials/WMD incident?
A. 470
B. 471
C. 472
D. 473
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
11
Ans: D
Page: 6
50. The following is a list of actions that might be taken on a hazardous materials
incident. Which action is appropriate for operations level responders but not for
awareness level responders?
A. Avoid contact with the material.
B. Take steps to contain the release.
C. Eliminate ignition sources.
D. Use the ERG to identify the material.
Ans: B
Page: 6, 8
2010 Jones and Bartlett Publishers, LLC and National Fire Protection Association.
12