Scribd
Upload
172 views2 pages

SES - 2000 Standard: Parametric Sub-Bottom Profiler

The document summarizes the specifications and components of the SES-2000 standard parametric sub-bottom profiler system. The key specifications include a water depth range of 0.5-500 meters, penetration up to 50 meters depending on sediments, and layer resolution up to 5 centimeters. The system components include a transducer, top-side unit, and internal PC for control. Software allows for data acquisition, export, remote display, and post-processing. Power requirements are 100-240V AC at 50-60Hz consuming less than 350W. Example survey data plots from the Baltic Sea and Northern Sea are shown.

Uploaded by

Yuridho Agni Kusuma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views2 pages

SES - 2000 Standard: Parametric Sub-Bottom Profiler

The document summarizes the specifications and components of the SES-2000 standard parametric sub-bottom profiler system. The key specifications include a water depth range of 0.5-500 meters, penetration up to 50 meters depending on sediments, and layer resolution up to 5 centimeters. The system components include a transducer, top-side unit, and internal PC for control. Software allows for data acquisition, export, remote display, and post-processing. Power requirements are 100-240V AC at 50-60Hz consuming less than 350W. Example survey data plots from the Baltic Sea and Northern Sea are shown.

Uploaded by

Yuridho Agni Kusuma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

14Bl tterA4-SES2000-3.FH10 27.02.

2014 8:42 Uhr Seite 9

Top-side unit

Transducer

Screenshot of the
operating software

Performance
- water depth range: 0.5 500 m
- penetration: up to 50 m,
depending on sediments
- layer resolution: up to 5 cm
- motion compensation: heave, roll
- beam width @ 3 dB: 2 /
footprint < 7 % of water depth
for all frequencies
Transmitter
- primary frequencies:
approx. 100 kHz (band 85 115 kHz)
- secondary low frequencies:
4, 5, 6, 8, 10, 12, 15 kHz
(band 2 22 kHz)
- primary source level: > 240 dB//Pa re 1 m
- pulse width: 0.07 1.3 ms
- pulse rate: up to 60/s
- multi-ping mode
- pulse type: CW, Ricker, LFM (chirp)
Acquisition
- primary frequency
(echo sounder, bottom track)
- secondary low frequency
(sub-bottom data, multi-frequency mode)
- sample rate 96 kHz @ 24 bit

System Components
- transceiver unit 19 inch / 9 U
(WHD: 0.52 m x 0.44 m x 0.40 m; 39 kg)
- transducer incl. 30 m cable
(WHD: 0.34 m x 0.08 m x 0.26 m; 30 kg)
- system control: internal PC

SES -2000 standard


Parametric Sub-bottom Profiler
-

Software
SESWIN data acquisition software
SES Convert SEG-Y/XTF data export
SES NetView remote display
ISE post-processing software

Power Supply Requirements


- 100 240 V AC / 50 60 Hz
- power consumption: < 350 W

www.innomar.com

14Bl tterA4-SES2000-3.FH10 27.02.2014 8:42 Uhr Seite 10

Survey examples of SES -2000 standard

165 m
170 m
175 m
180 m
185 m
190 m
195 m
200 m

Baltic Sea echo plot example Frequency 8 kHz, pulse length 375 s, profile length 6200 m

56 m

60 m

64 m

68 m

72 m
Northern Sea echo plot example (detail) Frequency 8 kHz, pulse length 375 s, profile length 4200 m

Innomar Technologie GmbH


Schutower Ringstrae 4
D-18069 Rostock
Phone (Fax) +49 381 44079-0 (-299)
E-Mail [email protected]

www.innomar.com

You might also like