IN70 Series

User's Guide
 Please read the safety instructions booklet before setting up
the projector.

Unpack the box

1 Here’s what’s included:

Projector Remote CD-ROM

M1-DA to HDMI
Composite Video Cable Power Cord Adapter (IN78 only)

Put batteries in the remote

2 The remote uses 2 AA batteries.

1 2 + +
3
-

Please dispose of batteries in an environmentally proper manner.

Remote illumination
Tap the button on the bottom of the remote for backlight,
hold it down for flashlight*
*Illumination features may not be available on all models
 Connect source
3 You can connect more
Connection How-To Guides
www.infocus.com/support/howto

than one source if needed.

Connect to: DVD, Cable Box, VCR, or Game  Basic

Composite Video Cable (included) Stereo Audio Cable* (not included)

L R
Audio In
Video Out L R
Audio Out
DVD, Cable Box, VCR, or Game Home Theater or Receiver

*www.infocus.com/store part no. SP-RCAAUD-5M

OR

Use optional cables (not included) for improved video quality

Connect to: DVD, Cable Box, VCR, or Game  Good

To Audio In
Use: S-Video Cable
Separates color from
brightness to improve quality.
L R
S-Video Out
Audio Out
DVD, Cable Box, VCR, or Game

www.infocus.com/store part no. SP-SVIDEO-10M

Connect to: HDTV Receiver or DVD  Better

To Audio In

Use: Component Video Cable

Separates all color signals for
better color accuracy. HDTV
Video Out L R

compatible. Y Pb Pr Audio Out

HDTV Receiver or DVD

www.infocus.com/store part no. SP-CPNT

Connect to: HDTV Receiver  Best

To Audio In
Use: HDMI Cable
100% Digital connection.
HDTV compatible.
HDMI Out L R
Audio Out
HDTV Receiver

www.infocus.com/store part no. SP-HDMI

Connect to: SCART Source Connect to: DVI Source
Use: SCART to RGBS Cable (RGB with sync) Use: M1 to DVI Cable
1 Connect 4 color-coded connectors 100% digital connection.
to corresponding connectors on
Connect the cable to the
projector.
projector’s M1-DA/DVI
2 Enable SCART RGB in the Source connector.
Enable menu (Settings > Sources >
Source Enable). www.infocus.com/store part no. SP-DVI-D

Turn on projector and source

4
1 Connect the power cord to the projector
and to an electrical outlet
The green light on the projector near the power button will
turn on.

2 Turn on the projector

Press power (on the projector or remote). The green light on the
projector will start blinking.

3 Wait for the lamp to warm up

After a few seconds, the green light will stop blinking and stay
on. It can take a minute for the lamp to reach full brightness.
5-10 sec.
Warning: Do not look directly into the lens
when the projector is turned on.

4 Turn on the source device

Turn on your DVD player, cable box, VCR, game, or HDTV
receiver.

5 Select the video source

If needed, press source (on the projector or remote) to view the
source. You may have to press it more than once.
 Adjust the picture
5
Projector location
1 Height As distance increases, the image gets
larger and moves upwards.

Tilt the projector up or down.

2 Keystone Lens center line

Interactive Screen Size and

Distance Calculator
www.infocus.com/calculator
To make the picture square:
1 Press menu (on projector or remote).
2 Press or to highlight Picture, IN72
then press select. Diagonal Distance to Screen
3 Press or to highlight Keystone,
Screen Size Minimum Maximum
then press select.
4 Press or to adjust keystone. 60” / 1.5 m 7’10” / 2.4 m 9’4” / 2.8 m
5 Press menu to exit. 80” / 2 m 10’5” / 3.2 m 12’4” / 3.8 m
92” /2.3 m 12’ / 3.7 m 14’2” / 4.3 m

3 Zoom and focus 150” / 3.8 m 19’6” / 5.9 m 23’1” / 7 m

zoom
(outer ring)
IN74/IN76/IN78
focus Diagonal Distance to Screen
(inner ring)
Screen Size Minimum Maximum

Adjust zoom first, then focus the 60” / 1.5 m 6’7” / 2 m 8’4” / 2.5 m
center of the image. 80” / 2 m 8’10” / 2.7 m 11’1” / 3.4 m
92” /2.3 m 10’1” / 3.1 m 12’10” / 3.9 m
4 Aspect ratio 150” / 3.8 m 16’5” / 5 m 20’10” / 6.3 m

Buy a Screen and Other Custom

Accessories
www.infocus.com/store
Press resize (on the remote) to make the
picture wider (16:9) or narrower (4:3).
 Turn off the projector
6
Press the power button
The green light on the projector will blink while the fan cools
the lamp. If you need to unplug the projector, wait until the
fan stops and the green light stops blinking and stays on.
Note: While the green light is blinking, button presses on the
projector and remote are ignored.

Register with InFocus

7 It’s quick, easy, and secure.
Activate your warranty to ensure eligibility for
service and support. Get special offers and
notifications about free product updates.

1 Write down your projector’s serial number

It’s printed on the label on the back of the projector. You’ll need it to register (and if you
ever need to contact InFocus support).

Serial number:

2 Go to www.infocus.com/register

Read the Reference Guide

8 and visit the InFocus web site

Insert the CD-ROM, or go to www.infocus.com/support

The Reference Guide is on the CD-ROM in multiple languages. It covers advanced setup and
operation, including lamp replacement instructions. The Reference Guide is also available at
www.infocus.com/support
Troubleshooting
There is no picture or the image is blank
Check power
If the light on the projector near the power button is off, make sure the power cord is
connected and plugged into a working electrical outlet.
If the light is green and not blinking, press the power button.

Check video source and cables

Make sure the video source (DVD player, cable box, VCR, game, HDTV receiver, etc.) is
turned on and cables are securely connected between the source and the projector.

Press the Source button (on projector or remote)

You may need to press it several times to view the correct source.

Press the Auto Image button (on remote)

The picture is unstable or distorted,

or “Signal out of range” is displayed

Press the Auto Image button (on remote)

The light on the projector is blinking red

Check air vents and lamp
Turn off the projector and remove anything that may be blocking its air vents. Leave the
projector off for at least one minute to let it cool, then turn it on again. If the projector
lamp won’t light and the red light starts to blink again, the lamp needs to be replaced.
For lamp replacement instructions, see the Reference Guide, which is on the included
CD-ROM or can be downloaded at www.infocus.com/support

More troubleshooting options are in the Reference Guide

The Reference Guide is on the included CD-ROM,

or download it at www.infocus.com/support

Warning: In the unlikely event of a lamp rupture, particles may be ejected from the projector.
Keep out of the area under and around the projector when it is turned on. See the safety
instructions booklet for more details.
 Questions? InFocus is here to help!
Visit us at:
www.infocus.com/support
InFocus is here to support you with your new purchase. We can help you with…
• Determining screen sizes
• Documentation in other languages
• Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.)
• Selecting optional accessories
• Product warranty protection plans

USA, Canada, Latin America Asia Pacific Europe, Middle East, Africa
Customer Support Telephone Customer Support Telephone Customer Support Telephone
+1 (503) 685-8888 Singapore: +65 63539449 +31 (0)36 539 2820
TOLL FREE: 800-799-9911 China: 800.828.2268 Mon-Fri, 08:30 – 18:00 CET
Mon-Fri, 7 am – 5 pm Pacific Australia: 1300-725-295 [email protected]
[email protected] Australia Direct Sales: 1800-885-841
Mon-Fri, 9 am – 5 pm SGT
[email protected]

Warning: Hg - Lamp contains mercury. Manage in accordance with local disposal laws.
See www.lamprecycle.org

Declaration of Conformity
Manufacturer: InFocus Corporation, 27500 SW Parkway Ave. Wilsonville, Oregon 97070-8238 USA
European Office: Louis Amstrongweg 110, 1311 RL Almere, The Netherlands
We declare under our sole responsibility that this projector conforms to the following directives and norms: EMC Directive 89/336/EEC,
Amended by 93/68/EEC, EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3, Low Voltage Directive 73/23/EEC, Amended by
93/68/EEC, Safety: IEC 60950-1:1st Edition

Trademarks
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer, Inc. IBM is a trademark or registered
trademark of International Business Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered trademarks of
Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated. InFocus, In Focus,
and INFOCUS (stylized), LP, LiteShow, ScreenPlay, LitePort, ASK and Proxima are either registered trademarks or trademarks of InFocus
Corporation in the United States and other countries.
FCC Warning
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment that are not expressly approved by InFocus Corp. may void the user’s authority to operate
the equipment.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Agency Approvals Product Models: P720, P740, P760
UL, CUL, NOM, IRAM, GOST, C-tick
Other specific Country Approvals may apply. Please see product certification label.
InFocus reserves the right to alter product offerings and specifications at any time without notice.