Winfoil

1|Page
Winfoil
eac_esi_config -nelist
# Gives all modules connected to the OSS
eaw module id
# To login in selected module
BSC Commands
RLCRP: CELL=ALL;
# Gives all sites connected to logged BSC
RLCRP: CELL= CELL ID, detail;
# Gives details of the selected cell
RLCFP: CELL=CELL ID;
# Gives cell configuration frequency data
RLDEP:CELL=CELL ID;
#CELL DESCRIPTION DATA
RLDEP:CELL=ALL;
# Gives Cell ID from BSC
RXTCP: MOTY=RXOTG, CELL=CELL ID; # Gives MO no. of the selected cell

RXTCP: MOTY=RXOTG;
RXAPP: MO= RXOTG No.;
#Gives site-id and TG mapping

# Gives all devices of the selected MO/cell
RADEP: DEV= Device No.
# Gives SNT number
mgcep:cell=all;
# Gives Cell ID from MSC
NTCOP: SNT= SNT No.
# Gives DIP/PCM number
DTSTP: DIP= DIP no.;
# Gives status of PCM/DIP
DTSTP: DIP= ALL;
# Gives all PCM status
DTSTP: DIP= ALL, STATE=ABL;

NTCOP: SNT=ALL;
# Gives all PCM having ABL status
# Gives all devices connected to the BSC
STDEP: DEV= RBLT-No. &&-No.; # Gives status of the Devices of selected range
RXAPP: MOTY=RXOTG;
# Gives all MO no. and its devices
RXTCP: MO=MO No.
# Gives cell id related to selected MO
RXCDP: MO=RXOTG-No.
# Gives Configuration of BTS
RXASP: MO=RXOTG-No.
# Gives site name & Alarms (local/remote sts)
RXASP: MOTY=RXOTG;
#Gives alarms of all BTS at once
RLSTC: CELL=SHI005A, STATE=ACTIVE;

RLSTP: CELL=SHI005A;
RXMSC: MO=RXOTG-No, RSITE= Site Name; # To Rename the BTS
;
Run CNA Program into OSS to get the changed name in DNPR
RXMFP:MO=RXOTRX-15-1; # Gives Product code(RUREVISION), Serial No. etc.
2|Page
RXMFP:MO=RXOCF-TG No.;
#Gives DXU No.(DXU_21:-2202,DXU_23:-2206,DXU_31:2964)
RLCPP:CELL=ALL;
#Gives BTS sectors radiating power
RLCXP:CELL=ALL;
#Gives Weather DTXT(Discontinuous Transmision) is ON or OFF
To Check ARFCN given to particular cell

RLCFP:CELL=SHI016A; # Gives ARFCNs allotted for particular cell
How many Max. No. of BTSs can connect to BSC

NTCOP:SNT=ALL; # in this search how many No. of RBLTs or RBL2s
To check the TRX usage in BSC
saaep:sae=1153;
To find the Cell info display on mobile:

RLMTP:ID=ALL,CELL=CELL-ID;
# Gives ID, CODE, GS,
RLMBP:ID=ID,CODE=CODE,GS=GS;
#Gives Cellinfo-display
To Reset the BTS:RXBLI: MO=RXOTG-NO, SUBORD, FORCE; To block

RXESE: MO=RXOTG-NO, SUBORD;
To make out of service
RXESI: MO=RXOTG-NO, SUBORD;
To make in-service
RXBLE: MO=RXOTG-NO, SUBORD;
To de-block
If ORDERED comes press ESC for any command
nsstp;
#CLOCK-REFERENCE STATE
Resetting the PCM of Particular BSC:DTQSR: DIP=ALL, ES, SES, SF;

DTQSR: DIP=ALL, ES2, SES2, SF;
DTQSR: DIP=ALL, UNACC, DEGR;
Error in PCM
DTQUP: DIP=RBLT-No.; To see the errors. If PCM is working
DTQDP: DIP=RBLT-No;
RXMSP: MO=RXOTG-No.,SUBORD; To see the status of TG & its subordinate.
To block dip
To de-block dip
To block device
To de-block device
To make device out of service
To make device in-service
DTBLI: DIP=DIP NO.;

DTBLE: DIP=DIP NO.;
BLODI: DEV=DEVICE NO.;
BLODE: DEV=DEVICE NO.;
EXDAE: DEV=DEVICE NO.
EXDAI: DEV=DEVICE NO.
3|Page
Example
RXBLI: MO=RXOTS-7-12-0&&-7;
RXESE: MO= RXOTS-7-12-0&&-7;
RXMOE: MO= RXOTS-7-12-0&&-7;
RXMOI: MO= RXOTS-7-11-0&&-7;
RXESI: MO= RXOTS-7-11-0&&-7;
RXBLE: MO= RXOTS-7-11-0&&-7;
Neighbour
RLNCP:CELL=cell;
# To print neighbour to cells
RLNRI:CELL=Serving cell,CELLR=Neighbour cell;
# Define neighbour
RLNRE:CELL= Serving cell,CELLR=Neighbour cell;
# End neighbour
MSC Commands
A. Opening of new number for signaling:
1. c7tzi;
2.
# clears the non operating area(NOP area)
if protected c7tli; then go to step 1,3,4,5,6,7
3. c7tci;
#copy from operating area to NOP area
4. c7gsp,tt=0,na=4,np=1,ns=91old series;
#Gives GTRC no.
5. c7gsp,tt=0,na=4,np=1,ns=91new series, GTRC= gtrc no.;

6. c7gcp:comp;
7. c7tai;
# compares OP and NOP area

# Copies NOP area into OP area
B. Opening of new number for voice channel:

1. anbzi;
# Clears entire Non-Operating area for B-table.
2 anbci;
# Copies the entire B-table from the operating area.
3 anbsi:b=31-98635,f=4,cc=0; # Used for changing the B-Number analysis table.

4 anbai;
# Copies NOP area into OP area
One TRU has 8 time slot.

X+Y+Z configuration means BTS has X- TRU, Y-TRU & Z-TRU in their sector A,B& C respectively.
Example: 2+2+2 configuration means 2-TRU in each sector A, B, C of a particular BTS.
Let for sector-A has X (say 2)-TRU means it has X*8 (say 2 * 8=16) times slot.
One time slot is used by BCCH
CBCH + SDCCH will take one time slot if CBCH=1 & SDCCH= 7
CBCH + SDCCH will take two time slot if CBCH=1 & SDCCH= 7+8=15
CBCH + SDCCH will take three time slot if CBCH=1 & SDCCH= 15+8=23 and so on
Remaining Time slot is used by TCH (No. of TCH)
4|Page
To change the SDCCH from 7 to 15 following command is used

RLCCC: CELL=CELL ID, SDCCH=2,CHGR=1;
Using these concepts & by rlcrp: cell=all; we can find the BTS configuration.
One traffic channel has data rate of
One PCM has data rate of 2048 kbps and has 32 time slots i.e. each time slot has 2048/32=64 kbps data
rate
One time slot of TRU carries 16 kbps data rate.
Therefore one TRU (i.e. 8 time slot) carries 8x16=128kbps data
Therefore for one TRU we need two time slot of a PCM (64x2=128kbps) for data transfer.
Say for 4+4+4 configuration, we have 12 TRU in a BTS. Therefore we need 24 time slot of a PCM. For
6+6+6 configuration, we have 18 TRU in a BTS. Therefore we need 36 time slot from two PCM, since
one PCM has not sufficient Time slot.
RXMSP:MO=RXOTS-20-0-0&&-7; TO SEE THE STATUS OF TIME SLOT

RXMSP:MO=RXOTS-20-1-0&&-7;
RXMSP:MO=RXOTRX-20-4; TO SEE THE STATUS OF TRX
RXMSP:MO=RXOTRX-20-5;
RXBLI:MO=RXOTRX-20-0,SUBORD,FORCE; To block particular TRX
RXBLE:MO=RXOTRX-20-0,SUBORD;
To de-block particular TRX
rxmsp:mo=rxotg-42,subord;
GPRS
rlgsp:cell= cell name;
# GPRSSUP should be YES
rlgrp:cell=cell name;
# Gives No. of Time slot NOPDCH reserved for GPRS
rlgse:cell= cell name;
# End the GPRS service
rlgsi:cell= cell name;
# Initiate the GPRS service
5|Page
HLR command
HGAPP:APNID=ALL;
HGSDP:MSISDN=9194..,all;
HGCAP;
agkdp:kind=all,akatype=0;
agkdp:kind=all,akatype=1;
# All access point ID

# All facilities on subscriber
# Gives HLR GT
# Gives GSM subscriber
# Gives UMTS subscriber
To Find the location of Subscriber

Login in HLR
HGSDP:MSISDN=91XXXXXXXXXX,all; # To Find MSC in which subscriber is latched by MSC
number
Login in MSC
MGCAP; # Gives the MSC number
CTRAI:MSISDN=91XXXXXXXXXX; #Gives MTV number
TEST SYSTEM;
PRINT VAR MTV MTV number : 327; # Gives Cell ID in Hexadecimal
END TEST;
MGCEP:CELL=ALL; #Gives BTS ID & CELL ID
Select the last hexadecimal word > Right click > Hex convert, Decimal value is the cell ID where
subscriber is latched.
For checking GPRS or EDGE
Rlbdp:cell=all;
Changing 3G frequency:
Get CELL-ID UARFCN # FOR CHECKING ARFCN
Lt all # for login to NODE-B
Pr antenna # Gives proxy numbers.in that, notedown which proxy is corresponds to
Equipment=1, Sector antenna=3, Antenna Branch=A
Get proxy No-1. #Gives Frequncy band high edge & Lw edge
Acc Proxy No. setfrequencyband
Y
21540
21590
Get Proxy No-2. #Gives Frequncy band high edge & Lw edge
Y
21540
21590
6|Page
Get Proxy No-3. #Gives Frequncy band high edge & Lw edge
Y
21540
21590
Bye
If you get any doubt, see the logfile in Winfoil folder
Migration of Distance:rlldc:cell=Cell ID with sector,maxta=Near about double of given distance;

rlluc:cell=Cell ID with sector,talim= Near about double of given distance;
Ericsson Minilink Installation
In the file MSM run setup file, it will ask password: sa_password, then Serial no. 1111.
After installation, it will ask password for control operator, pw is 1111
Find CGI(cell global identity):RLDEP :CELL =cell ;

Cell global identity
Expressed as mcc-mnc-lac-ci where:

mcc
Mobile country code

mnc
lac
Numeral 3 digits
Mobile network code
Location area code
Numeral 1 - 65535
ci
Cell identity
Numeral 0 65535

Winfoil

Uploaded by

Copyright:

Available Formats

Winfoil

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Winfoil

Uploaded by

Copyright:

Available Formats

1|Page

# Gives all modules connected to the OSS

# To login in selected module

# Gives all sites connected to logged BSC

RLCRP: CELL= CELL ID, detail;

# Gives details of the selected cell

RLCFP: CELL=CELL ID;

# Gives cell configuration frequency data

#CELL DESCRIPTION DATA

# Gives Cell ID from BSC

RXTCP: MOTY=RXOTG, CELL=CELL ID; # Gives MO no. of the selected cell

#Gives site-id and TG mapping

RADEP: DEV= Device No.

# Gives SNT number

# Gives Cell ID from MSC

NTCOP: SNT= SNT No.

# Gives DIP/PCM number

DTSTP: DIP= DIP no.;

# Gives status of PCM/DIP

DTSTP: DIP= ALL;

# Gives all PCM status

DTSTP: DIP= ALL, STATE=ABL;

# Gives all PCM having ABL status

# Gives all devices connected to the BSC

# Gives all MO no. and its devices

RXTCP: MO=MO No.

# Gives cell id related to selected MO

# Gives Configuration of BTS

# Gives site name & Alarms (local/remote sts)

#Gives alarms of all BTS at once

RLSTC: CELL=SHI005A, STATE=ACTIVE;

To Check ARFCN given to particular cell

How many Max. No. of BTSs can connect to BSC

To find the Cell info display on mobile:

To Reset the BTS:RXBLI: MO=RXOTG-NO, SUBORD, FORCE; To block

Resetting the PCM of Particular BSC:DTQSR: DIP=ALL, ES, SES, SF;

DTBLI: DIP=DIP NO.;

# To print neighbour to cells

RLNRI:CELL=Serving cell,CELLR=Neighbour cell;

RLNRE:CELL= Serving cell,CELLR=Neighbour cell;

# clears the non operating area(NOP area)

if protected c7tli; then go to step 1,3,4,5,6,7

#copy from operating area to NOP area

#Gives GTRC no.

5. c7gsp,tt=0,na=4,np=1,ns=91new series, GTRC= gtrc no.;

# compares OP and NOP area

B. Opening of new number for voice channel:

# Clears entire Non-Operating area for B-table.

# Copies the entire B-table from the operating area.

3 anbsi:b=31-98635,f=4,cc=0; # Used for changing the B-Number analysis table.

# Copies NOP area into OP area

One TRU has 8 time slot.

To change the SDCCH from 7 to 15 following command is used

RXMSP:MO=RXOTS-20-0-0&&-7; TO SEE THE STATUS OF TIME SLOT

To de-block particular TRX

# GPRSSUP should be YES

# Gives No. of Time slot NOPDCH reserved for GPRS

rlgse:cell= cell name;

# End the GPRS service