Scribd
Upload
202 views3 pages

BCD To 7 Segment LED Display Decoder Circuit

This document discusses a BCD to 7 segment LED display decoder circuit. It explains that a decoder is used to convert a binary coded decimal (BCD) number to the corresponding decimal number displayed on a 7 segment LED display. The circuit uses combinational logic gates to perform this conversion, with the output depending only on the current input state. Understanding Boolean algebra and logic gates is important for designing these decoder circuits.

Uploaded by

Akhila Vutukuri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
202 views3 pages

BCD To 7 Segment LED Display Decoder Circuit

This document discusses a BCD to 7 segment LED display decoder circuit. It explains that a decoder is used to convert a binary coded decimal (BCD) number to the corresponding decimal number displayed on a 7 segment LED display. The circuit uses combinational logic gates to perform this conversion, with the output depending only on the current input state. Understanding Boolean algebra and logic gates is important for designing these decoder circuits.

Uploaded by

Akhila Vutukuri
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

BCD to 7 Segment LED Display Decoder Circuit

ABSTRACT:
In 7 segment display by using logism we need to show the numbers from 0 to 9 by changing the
inputs Most often seven-segment displays are used to display the digits in digital watches,
calculators, clocks, measuring instruments and digital counters, etc. Generally, LCD and
LED segments provide the display output of numerical numbers and characters.
However to display the characters and numbers (in order to produce the decimal readout),
seven-segment displays are most commonly used. Mostly these displays are driven by the
output stages of digital ICs (to which the visual indication of the output stages has to be
performed) The first and foremost aspect of this circuit is decoder. A decoder is a
combinational circuit which is used to convert a binary or BCD (Binary Coded Decimal)
number to the corresponding decimal number . It can be a simple binary to decimal
decoder or a BCD to 7 segment decoder.
Another relevant section is the combinational logic circuitry. A combinational logic circuit
is a system of logic gates consisting of only outputs and inputs. The output of a
combinational logic circuit depends only on the present state of the inputs and nothing else.
Best examples of such circuits are Encoders and Decoders, Multiplexers and Demultiplexers, Adders, Subtractors etc.
To understand the design and operation of these logic circuits, one needs to have a good
knowledge about Boolean algebra and logic gates. For example few basic Boolean algebra
rules to be followed are the complementary law, associative law, De-Morgans law etc.
A 7 segment LED display consists of an arrangement of 8 LEDs such that either all the
anodes are common or cathodes are common. A common cathode 7 segment display
consists of 8 pins 7 input pins labeled from a to g and 8th pin as common ground pin.

circuit diagram:

NAME:SARVANI
ID NO:150030298
NAME:PRVALIKA
ID NO:150030296

You might also like