EX200 Exam

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

RedHat EX200

Red Hat Certified System AdministratorRHCSA


Version: 4.0

RedHat EX200 Exam


QUESTION NO: 1 CORRECT TEXT
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1

Answer: # cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40
GATEWAY=172.24.40.1
DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim
/etc/sysconfig/network
(Configure Host Name)

QUESTION NO: 2 CORRECT TEXT


Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group. The
user: tom's login shell should be non-interactive.

Answer: # useradd -G admin harry


# useradd -G admin natasha
# useradd -s /sbin/nologin tom
# id harry;id Natasha (Show additional group)
# cat /etc/passwd

"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam


(Show the login shell)
OR
# system-config-users

QUESTION NO: 3 CORRECT TEXT


Create a catalog under /home named admins. Its respective group is requested to be the admin
group. The group users could read and write, while other users are not allowed to access it. The
files created by users from the same group should also be the admin group.

Answer: # cd /home/
# mkdir admins /
# chown .admin admins/
# chmod 770 admins/
# chmod g+s admins/

QUESTION NO: 4 CORRECT TEXT


Configure a task: plan to run echo hello command at 14:23 every day.

Answer: # which echo


# crontab -e
23 14 * * * /bin/echo hello
# crontab -l (Verify)

QUESTION NO: 5 CORRECT TEXT


Find the files owned by harry, and copy it to catalog: /opt/dir

Answer: # cd /opt/
# mkdir dir
# find / -user harry -exec cp -rfp {} /opt/dir/ \;

QUESTION NO: 6 CORRECT TEXT


Find the rows that contain abcde from file /etc/testfile, and write it to the file/tmp/testfile, and the
sequence is requested as the same as /etc/testfile.

"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam


Answer: # cat /etc/testfile | while read line;
do
echo $line | grep abcde | tee -a /tmp/testfile
done
OR
grep `abcde' /etc/testfile > /tmp/testfile

QUESTION NO: 7 CORRECT TEXT


Create a 2G swap partition which take effect automatically at boot-start, and it should not affect
the original swap partition.

Answer: # fdisk /dev/sda


p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and
theextended partition is further divided into logical partitions) Enter
+2G
t
l
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)

QUESTION NO: 8 CORRECT TEXT


Create a user named alex, and the user id should be 1234, and the password should be alex111.

Answer: # useradd -u 1234 alex


# passwd alex
alex111
alex111

"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam


OR
echo alex111|passwd -stdin alex

QUESTION NO: 9 CORRECT TEXT


Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you
to configure yum direct to the already existing file server. )

Answer: # cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig --list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES

QUESTION NO: 10 CORRECT TEXT


Configure a HTTP server, which can be accessed through http://station.domain40.example.com.
Please download the released page from http://ip/dir/example.html.

Answer: # yum install -y httpd


# chkconfig httpd on
# cd /var/www/html
# wget http://ip/dir/example.html
# cp example.com index.html
# vim /etc/httpd/conf/httpd.conf
NameVirtualHost 192.168.0.254:80
<VirtualHost 192.168.0.254:80>
DocumentRoot /var/www/html/
ServerName station.domain40.example.com
</VirtualHost>
"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam

QUESTION NO: 11 CORRECT TEXT


Configure the verification mode of your host account and the password as LDAP. And it can
ldapuser40. The password is set as "password". And the certificate login successfully through
can be downloaded from http://ip/dir/ldap.crt. After the user logs on , the user has no host directory
unless you configure the autofs in the following questions.

Answer: system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP)
OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA
Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40

QUESTION NO: 12 CORRECT TEXT


Configure autofs to make sure after login successfully, it has the home directory autofs, which is
shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users
can use the home directory normally.

Answer: # chkconfig autofs on


# cd /etc/
# vim /etc/auto.master
/rhome /etc/auto.ldap
# cp auto.misc auto.ldap
# vim auto.ladp
ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40
* -rw,soft,intr 172.16.40.10:/rhome/&
# service autofs stop
# server autofs start
# showmount -e 172.24.40.10
# su - ladpuser40

"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam

QUESTION NO: 13 CORRECT TEXT


Configure the system synchronous as 172.24.40.10.

Answer: Graphical Interfaces:


System-->Administration-->Date & Time
OR
# system-config-date

QUESTION NO: 14 CORRECT TEXT


Change the logical volume capacity named vo from 190M to 300M. and the size of the floating
range should set between 280 and 320. (This logical volume has been mounted in advance.)

Answer: # vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)

QUESTION NO: 15 CORRECT TEXT


Create a volume group, and set 16M as a extends. And divided a volume group containing 50
"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam


extends on volume group lv, make it as ext4 file system, and mounted automatically under
/mnt/data.

Answer: # pvcreate /dev/sda7 /dev/sda8


# vgcreate -s 16M vg1 /dev/sda7 /dev/sda8
# lvcreate -l 50 -n lvm02
# mkfs.ext4 /dev/vg1/lvm02
# blkid /dev/vg1/lv1
# vim /etc/fstab
# mkdir -p /mnt/data
UUID=xxxxxxxx /mnt/data ext4 defaults 0 0
# vim /etc/fstab
# mount -a
# mount
(Verify)

QUESTION NO: 16 CORRECT TEXT


Upgrading the kernel as 2.6.36.7.1, and configure the system to Start the default kernel, keep the
old kernel available.

Answer: # cat /etc/grub.conf


# cd /boot
# lftp it
# get dr/dom/kernel-xxxx.rpm
# rpm -ivh kernel-xxxx.rpm
# vim /etc/grub.conf
default=0

QUESTION NO: 17 CORRECT TEXT


Create a 512M partition, make it as ext4 file system, mounted automatically under /mnt/data and
which take effect automatically at boot-start.

Answer: # fdisk /dev/vda


n
+512M
w
# partprobe /dev/vda

"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam


# mkfs -t ext4 /dev/vda5
# mkdir -p /data
# vim /etc/fstab
/dev/vda5 /data ext4 defaults 0 0
# mount -a

QUESTION NO: 18 CORRECT TEXT


Create a volume group,and set 8M as a extends. Divided a volume group containing 50 extends
on volume group lv (lvshare), make it as ext4 file system, and mounted automatically under
/mnt/data. And the size of the floating range should set between 380M and 400M.

Answer: # fdisk
# partprobe
# pvcreate /dev/vda6
# vgcreate -s 8M vg1 /dev/vda6 -s
# lvcreate -n lvshare -l 50 vg1 -l
# mkfs.ext4 /dev/vg1/lvshare
# mkdir -p /mnt/data
# vim /etc/fstab
/dev/vg1/lvshare /mnt/data ext4 defaults 0 0
# mount -a
# df -h

QUESTION NO: 19 CORRECT TEXT


Download ftp://192.168.0.254/pub/boot.iso to /root, and mounted automatically under
/media/cdrom and which take effect automatically at boot-start.

Answer: # cd /root; wget ftp://192.168.0.254/pub/boot.iso


# mkdir -p /media/cdrom
# vim /etc/fstab
/root/boot.iso /media/cdrom iso9660 defaults,loop 0 0
# mount -a
mount [-t vfstype] [-o options] device dir

QUESTION NO: 20 CORRECT TEXT


Add admin group and set gid=600
"Pass Any Exam. Any Time." - www.actualtests.com

RedHat EX200 Exam


Answer: # groupadd -g 600 admin

QUESTION NO: 21 CORRECT TEXT


Add user: user1, set uid=601
Password: redhat
The user's login shell should be non-interactive.

Answer: # useradd -u 601 -s /sbin/nologin user1


# passwd user1
redhat

QUESTION NO: 22 CORRECT TEXT


Add users: user2, user3.
The Additional group of the two users: user2, user3 is the admin group Password: redhat

Answer: # useradd -G admin user2


# useradd -G admin user3
# passwd user2
redhat
# passwd user3
redhat

QUESTION NO: 23 CORRECT TEXT


Copy /etc/fstab to /var/tmp name admin, the user1 could read, write and modify it, while user2
without any permission.

Answer: # cp /etc/fstab /var/tmp/


# chgrp admin /var/tmp/fstab
# setfacl -m u:user1:rwx /var/tmp/fstab
# setfacl -m u:user2:--- /var/tmp/fstab
# ls -l
-rw-rw-r--+ 1 root admin 685 Nov 10 15:29 /var/tmp/fstab

"Pass Any Exam. Any Time." - www.actualtests.com

10

RedHat EX200 Exam


QUESTION NO: 24 CORRECT TEXT
Configure a task: plan to run echo "file" command at 14:23 every day.

Answer: (a) Created as administrator


# crontab -u natasha -e
23 14 * * * /bin/echo "file"
(b)Created as natasha
# su - natasha
$ crontab -e
23 14 * * * /bin/echo "file"

"Pass Any Exam. Any Time." - www.actualtests.com

11

You might also like