###############################################################################

## Copyright(c) Oracle Corporation 1998,2011. All rights reserved.

##
##
##
## Specify values for the variables listed below to customize
##
## your installation.
##
##
##
## Each variable is associated with a comment. The comment
##
## can help to populate the variables with the appropriate
##
## values.
##
##
##
## IMPORTANT NOTE: This file contains plain text passwords and
##
## should be secured to have read permission only by oracle user
##
## or db administrator who owns this installation.
##
##
##
###############################################################################
###############################################################################
##
##
## Instructions to fill this response file
##
## To install and configure 'Grid Infrastructure for Cluster'
##
## - Fill out sections A,B,C,D,E,F and G
##
## - Fill out section G if OCR and voting disk should be placed on ASM
##
##
##
## To install and configure 'Grid Infrastructure for Standalone server'
##
## - Fill out sections A,B and G
##
##
##
## To install software for 'Grid Infrastructure'
##
## - Fill out sections A,B and C
##
##
##
## To upgrade clusterware and/or Automatic storage management of earlier
##
## releases
##
## - Fill out sections A,B,C,D and H
##
##
##
###############################################################################
#-----------------------------------------------------------------------------# Do not change the following system generated value.
#-----------------------------------------------------------------------------oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_sc
hema_v11_2_0
###############################################################################
#
#
#
SECTION A - BASIC
#
#
#
###############################################################################
#------------------------------------------------------------------------------# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
#------------------------------------------------------------------------------ORACLE_HOSTNAME=localhost.localdomain
#------------------------------------------------------------------------------# Specify the location which holds the inventory files.
# This is an optional parameter if installing on

# Windows based Operating System.

#------------------------------------------------------------------------------INVENTORY_LOCATION=/u01/app/oraInventory
#------------------------------------------------------------------------------# Specify the languages in which the components will be installed.
#
# en : English
ja : Japanese
# fr : French
ko : Korean
# ar : Arabic
es : Latin American Spanish
# bn : Bengali
lv : Latvian
# pt_BR: Brazilian Portuguese
lt : Lithuanian
# bg : Bulgarian
ms : Malay
# fr_CA: Canadian French
es_MX: Mexican Spanish
# ca : Catalan
no : Norwegian
# hr : Croatian
pl : Polish
# cs : Czech
pt : Portuguese
# da : Danish
ro : Romanian
# nl : Dutch
ru : Russian
# ar_EG: Egyptian
zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian
sl : Slovenian
# fi : Finnish
es_ES: Spanish
# de : German
sv : Swedish
# el : Greek
th : Thai
# iw : Hebrew
zh_TW: Traditional Chinese
# hu : Hungarian
tr : Turkish
# is : Icelandic
uk : Ukrainian
# in : Indonesian
vi : Vietnamese
# it : Italian
#
# all_langs : All languages
#
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
#
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
#------------------------------------------------------------------------------SELECTED_LANGUAGES=en
#------------------------------------------------------------------------------# Specify the installation option.
# Allowed values: CRS_CONFIG or HA_CONFIG or UPGRADE or CRS_SWONLY
# CRS_CONFIG - To configure Grid Infrastructure for cluster
# HA_CONFIG - To configure Grid Infrastructure for stand alone server
# UPGRADE
- To upgrade clusterware software of earlier release
# CRS_SWONLY - To install clusterware files only (can be configured for cluste
r
#
or stand alone server later)
#------------------------------------------------------------------------------oracle.install.option=CRS_SWONLY
#------------------------------------------------------------------------------# Specify the complete path of the Oracle Base.
#------------------------------------------------------------------------------ORACLE_BASE=/u01/app/oracle
#-------------------------------------------------------------------------------

# Specify the complete path of the Oracle Home.

#------------------------------------------------------------------------------ORACLE_HOME=/u01/app/11.2.0/grid
################################################################################
#
#
#
SECTION B - GROUPS
#
#
#
# The following three groups need to be assigned for all GI installations. #
# OSDBA and OSOPER can be the same or different. OSASM must be different
#
# than the other two.
#
# The value to be specified for OSDBA, OSOPER and OSASM group is only for
#
# Unix based Operating System.
#
#
#
################################################################################
#------------------------------------------------------------------------------# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
#------------------------------------------------------------------------------oracle.install.asm.OSDBA=asmdba
#------------------------------------------------------------------------------# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
#------------------------------------------------------------------------------oracle.install.asm.OSOPER=
#------------------------------------------------------------------------------# The OSASM_GROUP is the OS group which is to be granted OSASM privileges. This
# must be different than the previous two.
#------------------------------------------------------------------------------oracle.install.asm.OSASM=asmadmin
################################################################################
#
#
#
SECTION C - SCAN
#
#
#
################################################################################
#------------------------------------------------------------------------------# Specify a name for SCAN
#------------------------------------------------------------------------------oracle.install.crs.config.gpnp.scanName=
#------------------------------------------------------------------------------# Specify a unused port number for SCAN service
#------------------------------------------------------------------------------oracle.install.crs.config.gpnp.scanPort=0
################################################################################
#
#
#
SECTION D - CLUSTER & GNS
#
#
#
################################################################################
#------------------------------------------------------------------------------# Specify a name for the Cluster you are creating.
#
# The maximum length allowed for clustername is 15 characters. The name can be
# any combination of lower and uppercase alphabets (A - Z), (0 - 9), hyphen(-)
# and underscore(_).
#------------------------------------------------------------------------------oracle.install.crs.config.clusterName=

#------------------------------------------------------------------------------# Specify 'true' if you would like to configure Grid Naming Service(GNS), else
# specify 'false'
#------------------------------------------------------------------------------oracle.install.crs.config.gpnp.configureGNS=true
#------------------------------------------------------------------------------# Applicable only if you choose to configure GNS
# Specify the GNS subdomain and an unused virtual hostname for GNS service
# Additionally you may also specify if VIPs have to be autoconfigured
#
# Value for oracle.install.crs.config.autoConfigureClusterNodeVIP should be true
# if GNS is being configured(oracle.install.crs.config.gpnp.configureGNS), false
# otherwise.
#------------------------------------------------------------------------------oracle.install.crs.config.gpnp.gnsSubDomain=
oracle.install.crs.config.gpnp.gnsVIPAddress=
oracle.install.crs.config.autoConfigureClusterNodeVIP=false
#------------------------------------------------------------------------------# Specify a list of public node names, and virtual hostnames that have to be
# part of the cluster.
#
# The list should a comma-separated list of nodes. Each entry in the list
# should be a colon-separated string that contains 2 fields.
#
# The fields should be ordered as follows:
# 1. The first field is for public node name.
# 2. The second field is for virtual host name
#
(specify as AUTO if you have chosen 'auto configure for VIP'
#
i.e. autoConfigureClusterNodeVIP=true)
#
# Example: oracle.install.crs.config.clusterNodes=node1:node1-vip,node2:node2-vi
p
#------------------------------------------------------------------------------oracle.install.crs.config.clusterNodes=
#------------------------------------------------------------------------------# The value should be a comma separated strings where each string is as shown be
low
# InterfaceName:SubnetMask:InterfaceType
# where InterfaceType can be either "1", "2", or "3"
# (1 indicates public, 2 indicates private, and 3 indicates the interface is not
used)
#
# For example: eth0:140.87.24.0:1,eth1:10.2.1.0:2,eth2:140.87.52.0:3
#
#------------------------------------------------------------------------------oracle.install.crs.config.networkInterfaceList=
################################################################################
#
#
#
SECTION E - STORAGE
#
#
#
################################################################################
#------------------------------------------------------------------------------# Specify the type of storage to use for Oracle Cluster Registry(OCR) and Voting
# Disks files

# - ASM_STORAGE
# - FILE_SYSTEM_STORAGE
#------------------------------------------------------------------------------oracle.install.crs.config.storageOption=
#------------------------------------------------------------------------------# THIS PROPERTY NEEDS TO BE FILLED ONLY IN CASE OF WINDOWS INSTALL.
# Specify a comma separated list of strings where each string is as shown below:
# Disk Number:Partition Number:Drive Letter:Format Option
# The Disk Number and Partition Number should refer to the location which has to
# be formatted. The Drive Letter should refer to the drive letter that has to be
# assigned. "Format Option" can be either of the following # 1. SOFTWARE - Format to place software binaries.
# 2. DATA - Format to place the OCR/VDSK files.
#
# For example: 1:2:P:DATA,1:3:Q:SOFTWARE,1:4:R:DATA,1:5:S:DATA
#
#------------------------------------------------------------------------------oracle.install.crs.config.sharedFileSystemStorage.diskDriveMapping=
#------------------------------------------------------------------------------# These properties are applicable only if FILE_SYSTEM_STORAGE is chosen for
# storing OCR and voting disk
# Specify the location(s) and redundancy for OCR and voting disks
# Multiple locations can be specified, separated by commas.
# In case of windows, mention the drive location that is specified to be
# formatted for DATA in the above property.
# Redundancy can be one of these:
#
EXTERNAL - one(1) location should be specified for OCR and voting disk
#
NORMAL - three(3) locations should be specified for OCR and voting disk
# Example:
#
For Unix based Operating System:
#
oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=/ora
dbocfs/storage/vdsk1,/oradbocfs/storage/vdsk2,/oradbocfs/storage/vdsk3
#
oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=/oradbocfs/
storage/ocr1,/oradbocfs/storage/ocr2,/oradbocfs/storage/ocr3
#
For Windows based Operating System:
#
oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=P:\v
dsk1,R:\vdsk2,S:\vdsk3
#
oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=P:\ocr1,R:\
ocr2,S:\ocr3
#------------------------------------------------------------------------------oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=
oracle.install.crs.config.sharedFileSystemStorage.votingDiskRedundancy=NORMAL
oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=
oracle.install.crs.config.sharedFileSystemStorage.ocrRedundancy=NORMAL
################################################################################
#
#
#
SECTION F - IPMI
#
#
#
################################################################################
#------------------------------------------------------------------------------# Specify 'true' if you would like to configure Intelligent Power Management int
erface

# (IPMI), else specify 'false'

#------------------------------------------------------------------------------oracle.install.crs.config.useIPMI=false
#------------------------------------------------------------------------------# Applicable only if you choose to configure IPMI
# i.e. oracle.install.crs.config.useIPMI=true
# Specify the username and password for using IPMI service
#------------------------------------------------------------------------------oracle.install.crs.config.ipmi.bmcUsername=
oracle.install.crs.config.ipmi.bmcPassword=
################################################################################
#
#
#
SECTION G - ASM
#
#
#
################################################################################
#------------------------------------------------------------------------------# Specify a password for SYSASM user of the ASM instance
#------------------------------------------------------------------------------oracle.install.asm.SYSASMPassword=
#------------------------------------------------------------------------------# The ASM DiskGroup
#
# Example: oracle.install.asm.diskGroup.name=data
#
#------------------------------------------------------------------------------oracle.install.asm.diskGroup.name=
#------------------------------------------------------------------------------# Redundancy level to be used by ASM.
# It can be one of the following
# - NORMAL
# - HIGH
# - EXTERNAL
# Example: oracle.install.asm.diskGroup.redundancy=NORMAL
#
#------------------------------------------------------------------------------oracle.install.asm.diskGroup.redundancy=
#------------------------------------------------------------------------------# Allocation unit size to be used by ASM.
# It can be one of the following
# - 1
# - 2
# - 4
# - 8
# - 16
# Example: oracle.install.asm.diskGroup.AUSize=4
# size unit is MB
#
#------------------------------------------------------------------------------oracle.install.asm.diskGroup.AUSize=1
#------------------------------------------------------------------------------# List of disks to create a ASM DiskGroup
#
# Example:

#
For Unix based Operating System:
#
oracle.install.asm.diskGroup.disks=/oracle/asm/disk1,/oracle/asm/disk2
#
For Windows based Operating System:
#
oracle.install.asm.diskGroup.disks=\\.\ORCLDISKDATA0,\\.\ORCLDISKDATA1
#
#------------------------------------------------------------------------------oracle.install.asm.diskGroup.disks=
#------------------------------------------------------------------------------# The disk discovery string to be used to discover the disks used create a ASM D
iskGroup
#
# Example:
#
For Unix based Operating System:
#
oracle.install.asm.diskGroup.diskDiscoveryString=/oracle/asm/*
#
For Windows based Operating System:
#
oracle.install.asm.diskGroup.diskDiscoveryString=\\.\ORCLDISK*
#
#------------------------------------------------------------------------------oracle.install.asm.diskGroup.diskDiscoveryString=
#------------------------------------------------------------------------------# oracle.install.asm.monitorPassword=password
#------------------------------------------------------------------------------oracle.install.asm.monitorPassword=
################################################################################
#
#
#
SECTION H - UPGRADE
#
#
#
################################################################################
#------------------------------------------------------------------------------# Specify nodes for Upgrade.
# For upgrade on Windows, installer overrides the value of this parameter to inc
lude
# all the nodes of the cluster. However, the stack is upgraded one node at a tim
e.
# Hence, this parameter may be left blank for Windows.
# Example: oracle.install.crs.upgrade.clusterNodes=node1,node2
#------------------------------------------------------------------------------oracle.install.crs.upgrade.clusterNodes=
#------------------------------------------------------------------------------# For RAC-ASM only. oracle.install.asm.upgradeASM=true/false
# Value should be 'true' while upgrading Cluster ASM of version 11gR2(11.2.0.1.0
) and above
#------------------------------------------------------------------------------oracle.install.asm.upgradeASM=false
#-----------------------------------------------------------------------------# Specify the auto-updates option. It can be one of the following:
# a.MYORACLESUPPORT_DOWNLOAD
# b.OFFLINE_UPDATES
# c.SKIP_UPDATES
#-----------------------------------------------------------------------------oracle.installer.autoupdates.option=SKIP_UPDATES
#-----------------------------------------------------------------------------# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updat
es

# are present.
oracle.installer.autoupdates.downloadUpdatesLoc=
#-----------------------------------------------------------------------------# Specify the My Oracle Support Account Username which has the patches download
privileges
# to be used for software updates.
# Example : [email protected]
#-----------------------------------------------------------------------------AUTOUPDATES_MYORACLESUPPORT_USERNAME=
#-----------------------------------------------------------------------------# Specify the My Oracle Support Account Username password which has the patches
download privileges
# to be used for software updates.
#
# Example
: AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
#-----------------------------------------------------------------------------AUTOUPDATES_MYORACLESUPPORT_PASSWORD=
#-----------------------------------------------------------------------------# Specify the Proxy server name. Length should be greater than zero.
#
# Example
: PROXY_HOST=proxy.domain.com
#-----------------------------------------------------------------------------PROXY_HOST=
#-----------------------------------------------------------------------------# Specify the proxy port number. Should be Numeric and atleast 2 chars.
#
# Example
: PROXY_PORT=25
#-----------------------------------------------------------------------------PROXY_PORT=0
#-----------------------------------------------------------------------------# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example
: PROXY_USER=username
#-----------------------------------------------------------------------------PROXY_USER=
#-----------------------------------------------------------------------------# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
#
# Example
: PROXY_PWD=password
#-----------------------------------------------------------------------------PROXY_PWD=
#-----------------------------------------------------------------------------# Specify the proxy realm.
#
# Example
: PROXY_REALM=metalink
#------------------------------------------------------------------------------