PVC Pipe Bending

Automatic Pipe Bender BMS 63
June 16, 2013

The BMS 63 is Sicas automatic machine for bending and socketing with exceptional rapidity
PVC pipes common in electronic and

systems.
telephonic
In particular, this machine can process pipes with a diameter from 16 to 63 mm, with possible
final length from 140 to 650 mm. The machine is equipped with a versatile multi-bender and
multi-belling system that can bend with a variable angle between 90 and 0 (so, it can also avoid
bending) and with bend radius from 1 to 5 times larger than the diameter of the pipe itself.
At every end of each bend/pipe, the machine can also socket (through suitable thermoforming
process) both solvent cement and O-Ring type (optional) in every desired configuration, such as:
simple bend
bend with single socket end
bend with sockets on both ends (double socket)
straight unbent pipe with single or double socket
In this way, every possible production need can be satisfied.

The bending is hydraulic/pneumatic, and it is controlled through specific proportional valves and
linear encoder that guarantees absolute precision and repeatability of the process. Every setting is
automatically adjusted from the operational panel with the machine in operation, which prevents
interruptions, manual changes or dangerous access into the unit.
Large glass panels on each side of the machine allow full visibility but contextual security of the
process, allowing the operator to follow the repositioning of the pipe through the different units
within the machine, which is composed by:
1 transport and sorting unit for pipes entering the machine
2 ceramic material heating units
2 multi-thermoforming units
1 multi-bending unit with logic control
1 ejection unit of final bent/belled parts.
The final product is unloading in a collection cart supplied with the machine. This allows easy
removal of the product, while also permitting a check of the bent/belled product with total
security during machine operation to make real-time changes to the necessary parameters for
optimizing the process.
The machine can, if required, be equipped with a suitable AL/T63 storage feeder with which
BMS63 becomes a system for creating bent pipes. In fact, the system can store pipes 3 m long,
automatically generate pieces of desired lengths (with a specific cutting system with millimetric
precision), and feed continually the bending machine, fully automating the process.
Security, management ease, rapid set-up and format change, minimal level of required
maintenance, high productivity per hour and high precision in realizing the characteristics of the
desired product, distinguish and confirm the quality and the technology of Sica products.
One Response to Automatic Pipe Bender BMS 63
1.
Harry says:
July 19, 2013 at 6:53 pm
Currently we glue two 90 degrees elbows to straight PVC pipes to make a discharge
piping system in the shape of an open J. We are looking for a machine that can bend the
PVC Pipe to the desire shape. Pipes are 2 (50.8 mm) Schedule 40 PVC and Wall
thickness of 3.91 mm. It appears that the PVC Pipe bending below may work. Please
send us your contact information so we can discuss this in details.
Reply
Product Description
On the basis of internation advanced technology form the developed countries, we produced the
PVC pipe bending machine independently. This machine can be used to instead of traditional
PVC fitting injection machines. And this machine can save cost about 50% than injection
machines. We aims to make high quality machines with reasonable price.
This machine can bend the pipes at the same time of making socket.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Outer Dimension of Machine(mm)

Pipe Outer Diameter
Heating Method
Heating Power
Heating station
cooling method
total power of hydraulic system
socketing station
socket type
hydrailic oil
Max heating temperature
Air pressure
Water pressire
Pipe rotate motor power
pipe unload motor power
bending speed
About 3100 2440 2300

75-160mm
Ceramic infrared heating
18kw
2
air coooling and water cooling
4kw
2
U type and R type
46# wear resistance hydraulic oil
300
0.4-0.6Mpa
0.2-0.3Mpa
0.37kw
0.18kw
110 2.0mm
80seconds/pipe

PVC Pipe Bending

Uploaded by

Copyright:

Available Formats

PVC Pipe Bending

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PVC Pipe Bending

Uploaded by

Copyright:

Available Formats

What machine is being described in the document content?

What are the main features and capabilities of the machine?

Automatic Pipe Bender BMS 63

June 16, 2013

PVC pipes common in electronic and

bend with single socket end

bend with sockets on both ends (double socket)

straight unbent pipe with single or double socket

In this way, every possible production need can be satisfied.

1 transport and sorting unit for pipes entering the machine

2 ceramic material heating units

1 multi-bending unit with logic control

1 ejection unit of final bent/belled parts.

One Response to Automatic Pipe Bender BMS 63

Outer Dimension of Machine(mm)

About 3100 2440 2300

You might also like