NCR 6632 ATM: Parts Identification Manual
Uploaded by
Damion PartinNCR 6632 ATM: Parts Identification Manual
Uploaded by
Damion PartinNCR 6632 ATM
Parts Identification Manual
Front Cover
B006-6735-A000
1007
The product described in this book is a licensed product of NCR Corporation.
NCR Proprietary Information - not to be disclosed or reproduced without written consent.
NCR and Personas are trademarks of NCR Corporation.
Other product names mentioned in this publication may be trademarks or registered trademarks of their respective companies and are
hereby acknowledged.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become available.
NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office
for information that is applicable and current.
2007
By NCR Corporation, Dayton, Ohio U.S.A.
http://www.ncr.com
All Rights Reserved
6632 Parts Identification Manual
Revision Record
Revision Record
Revision
Chapter Name Reason for change
Date
all
October 2007
October 2007
First publication
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Revision Record
ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Table of Contents
Table of Contents
6632 Parts Identification Manual
Chapter 1: Introduction
MANUAL ORGANISATION......................................................................................... 1-1
Headers and Footers.................................................................................................... 1-2
Manual and Chapter Name .................................................................................... 1-2
Page Numbering..................................................................................................... 1-2
Dates on Pages ....................................................................................................... 1-2
Revision Record.......................................................................................................... 1-2
ASSEMBLIES ................................................................................................................. 1-2
Identification of Assemblies ....................................................................................... 1-2
Sub-assemblies with no Parts Breakdown .................................................................. 1-2
Multiple Views ........................................................................................................... 1-2
PARTS LISTS ................................................................................................................. 1-3
Columns in Parts Lists ................................................................................................ 1-3
Indented Parts Lists..................................................................................................... 1-3
References to Contents ............................................................................................... 1-3
Reference Letter Beginning with Z ......................................................................... 1-3
Recommended Spare Parts ......................................................................................... 1-4
Components Identified by Schematic Symbol............................................................ 1-4
FEATURES ..................................................................................................................... 1-4
UPDATES ....................................................................................................................... 1-4
Chapter 2: Alarms
INTRODUCTION ........................................................................................................... 2-1
STANDARD ALARM SYSTEM ................................................................................... 2-2
ENHANCED ALARM SYSTEM .................................................................................. 2-3
HIGH SECURITY ALARM SYSTEM .......................................................................... 2-4
BASIC ALARMS WITH STATUS ASSEMBLY .......................................................... 2-5
ENHANCED ALARMS WITH STATUS ASSEMBLY................................................ 2-5
ALARMS BASIC AND ENHANCED WITH STATUS ASSEMBLY ......................... 2-6
BASIC ALARMS HARNESS......................................................................................... 2-6
UX DOOR SWITCH HARNESS.................................................................................... 2-7
ATHENA ALARMS HARNESS .................................................................................... 2-7
ENHANCED ALARMS HARNESS .............................................................................. 2-8
DOOR SWITCH HARNESS (RAL)............................................................................... 2-8
MAS HAMILTON HARNESS ....................................................................................... 2-9
DISK TAMPER HARNESS ........................................................................................... 2-9
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
iii
6632 Parts Identification Manual
Table of Contents
Chapter 3: Audio
INTRODUCTION ........................................................................................................... 3-1
AUDIO PUBLIC PRIVATE AFA WITH HEADPHONE JACK DETECT (F552) ...... 3-2
Chapter 4: Auto Supervisor Entry
INTRODUCTION ........................................................................................................... 4-1
AUTO SUPERVISOR ENTRY (F450) .......................................................................... 4-2
AUTO SUPERVISOR HARNESS WITH PA ................................................................ 4-3
AUTO SUPERVISOR HARNESS WITHOUT PA........................................................ 4-3
Chapter 5: Cabinetry
INTRODUCTION ........................................................................................................... 5-1
F/A SAFE ASSEMBLIES............................................................................................... 5-2
R/A SAFE ASSEMBLIES .............................................................................................. 5-3
VX4 FASCIA ASSEMBLIES ......................................................................................... 5-4
VX4 FASCIA MOULDINGS ......................................................................................... 5-5
REAR DOOR AND OP MOUNTING (WITHOUT 80 COL) ....................................... 5-6
REAR DOOR AND OP MOUNTING (WITH 80 COL)................................................ 5-7
VIDEO CAMERA (NTSC / PAL) .................................................................................. 5-8
2D BARCODE READER ............................................................................................... 5-9
CABINETRY ASSEMBLY (VIEW 1 OF 3)................................................................ 5-10
CABINETRY ASSEMBLY (VIEW 2 OF 3)................................................................ 5-11
CABINETRY ASSEMBLY (VIEW 3 OF 3)................................................................ 5-12
6632 SHUTTER ASSEMBLY ...................................................................................... 5-13
Chapter 6: Card Reader
INTRODUCTION ........................................................................................................... 6-1
U-IMCRW ....................................................................................................................... 6-2
LFCC ASSEMBLY ......................................................................................................... 6-3
ATHENA SENSOR HARNESS ..................................................................................... 6-4
OPEN BIN ....................................................................................................................... 6-5
MCRW MM / CIM ENABLE STAGE 1 ASSEMBLY .................................................. 6-6
UNIVERSAL 12V REGULATOR ................................................................................. 6-7
UNIVERSAL 5V REGULATOR ................................................................................... 6-7
MM SENSOR HARNESS............................................................................................... 6-8
MM SENSOR EXTENSION CABLE 4M...................................................................... 6-8
MM TO STAGE 1 PCB CABLE ASSEMBLY .............................................................. 6-9
CIM TO STAGE 1 PCB CABLE ASSEMBLY ............................................................. 6-9
SMART DIP READER ................................................................................................. 6-10
LOW POWER DC DISTRIBUTION HARNESS 2000MM ........................................ 6-11
iv
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Table of Contents
USB TYPE A TO MINI B HIGH SPEED CABLE 2000MM 480MBPS .................... 6-11
Chapter 7: Coin Dispenser
INTRODUCTION ........................................................................................................... 7-1
6632 COIN DISPENSER ASSEMBLY (VIEW 1 OF 2)................................................ 7-2
6632 COIN DISPENSER ASSEMBLY (VIEW 2 OF 2)................................................ 7-3
6632 HOPPER ASSEMBLY........................................................................................... 7-4
6632 COIN ROTOR COMBINATIONS ........................................................................ 7-5
6632 COIN DISPENSER PCB ASSEMBLY ................................................................. 7-6
6632 COIN MODULE HARNESS ................................................................................. 7-7
USB 2.0 A TO B RIGHT ANGLE CONNECTOR CABLE ASSEMBLY .................... 7-8
Chapter 8: Core
INTRODUCTION ........................................................................................................... 8-1
PIVAT CORE ASSEMBLY ........................................................................................... 8-2
ATX SOCKET 478 MOTHERBOARD.......................................................................... 8-3
PCI PCCM TOP LEVEL ASSEMBLY .......................................................................... 8-4
PIRAT TOP LEVEL ASSEMBLY ................................................................................. 8-4
UOP PCI GRAPHICS CARD ......................................................................................... 8-5
FLOPPY DISK DRIVE CABLE ASSEMBLY .............................................................. 8-6
ULTRA ATA CABLE ASSEMBLY .............................................................................. 8-6
PIVAT DISK SECURITY HARNESS ........................................................................... 8-7
PIRAT PIVAT HARNESS.............................................................................................. 8-7
PIVAT SLH HARNESS.................................................................................................. 8-8
TALLADEGA CORE ASSEMBLY ............................................................................... 8-9
TALLADEGA MOTHERBOARD ............................................................................... 8-10
TALLADEGA - USB 2.0 4 PORT BREAK OUT ASSEMBLY.................................. 8-11
SERIAL ATA WITH LATCHED CONNECTORS CABLE ASSEMBLY ................. 8-11
PIRAT TALLADEGA HARNESS ............................................................................... 8-12
FLOPPY DISK DRIVE CABLE ASSEMBLY ............................................................ 8-12
Chapter 9: Cheque Processing Module
INTRODUCTION ........................................................................................................... 9-1
6632 CPM4 ASSEMBLY ( VIEW 1 OF 3 ) ................................................................... 9-2
6632 CPM4 ASSEMBLY ( VIEW 2 OF 3 ) ................................................................... 9-3
6632 CPM4 ASSEMBLY ( VIEW 3 OF 3 ) ................................................................... 9-4
CPM 4 RECOMMENDED SPARE PARTS................................................................... 9-5
CPM CALIBRATION DOCUMENTATION SET ........................................................ 9-6
SCANNER COVER CLEANING PACK ....................................................................... 9-6
CPM MODULE HARNESS .......................................................................................... 9-7
CPM MODULE EXTENSION HARNESS .................................................................... 9-7
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Table of Contents
Chapter 10: Currency Deposit
INTRODUCTION ......................................................................................................... 10-1
GBRU / GBNA TRANSPORT .................................................................................... 10-2
GBRU / GBNA STABILISER ...................................................................................... 10-3
GBRU / GBNA MODULE ASSEMBLY (VIEW 1 OF 2 ) .......................................... 10-4
GBRU / GBNA MODULE ASSEMBLY ( VIEW 2 OF 2 ) ......................................... 10-5
GBRU / GBNA LOWER BASE CASSETTES ............................................................ 10-6
GBRU / GBNA CURRENCY CASSETTES ................................................................ 10-6
CASSETTE CONFIGURATION PARTS .................................................................... 10-7
GBRU / GBNA REJECT BINS .................................................................................... 10-8
GBRU / GBNA MAIN UPPER PCB ............................................................................ 10-9
GBRU / GBNA LOWER PCB .................................................................................... 10-10
GBRU / GBNA SEPARATOR PCB........................................................................... 10-10
GBRU / GBNA POWER SUPPLY ASSEMBLY ...................................................... 10-11
GBRU / GBNA REED SWITCH BOARD ASSEMBLY........................................... 10-11
GBRU/GBNA MISCELLANEOUS CABINETRY ................................................... 10-12
GBRU POWER HARNESS ........................................................................................ 10-13
GBRU I2C ENABLE HARNESS ............................................................................... 10-13
INTERLOCK HARNESS ........................................................................................... 10-14
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER ) ....................................... 10-14
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER , UCRN )......................... 10-15
GBRU / GBNA CABLE ASSEMBLY ( BV POWER ) ............................................. 10-15
GBRU / GBNA 100 BASE - T CABLE ( BV LAN ) ................................................. 10-16
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, POWER )................ 10-16
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, SIGNAL ) ............... 10-17
GBRU / GBNA CABLE ASSEMBLY ( ATM POWER ).......................................... 10-17
GBRU / GBNA USB CABLE ASSEMBLY .............................................................. 10-18
GBRU / GBNA CABLE ASSEMBLY (SHUTTER MEI) ......................................... 10-18
6632 BNA RETRACTION ASSEMBLY F/A ............................................................ 10-19
6632 BNA RETRACTION ASSEMBLY R/A TTW .................................................. 10-19
6632 BNA MOUNTING ASSEMBLY (VIEW 1 OF 2)............................................. 10-20
6632 BNA MOUNTING ASSEMBLY (VIEW 2 OF 2) ............................................ 10-21
6634 BNA2 ASSEMBLY .......................................................................................... 10-22
MAIN CPU BOARD (UD600) ................................................................................... 10-23
MOTOR CONTROLLER (UD600) ............................................................................ 10-23
POWER BOARD (UD600)......................................................................................... 10-24
L SHAPED USB BOARD .......................................................................................... 10-24
BNA2 GARAGE SLIDES........................................................................................... 10-25
BNA2 ATHENA HARNESS ...................................................................................... 10-26
Chapter 11: Currency Dispenser
INTRODUCTION ......................................................................................................... 11-1
F/A RETRACT ASSEMBLY ....................................................................................... 11-2
R/A RETRACT ASSEMBLY ....................................................................................... 11-3
F/A PRESENTER ASSEMBLY ................................................................................... 11-4
R/A PRESENTER ASSEMBLY................................................................................... 11-5
LEFT AND RIGHT HAND PICK MODULE 2 HIGH ................................................ 11-6
vi
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Table of Contents
LEFT AND RIGHT HAND PICK MODULE 3 HIGH ................................................ 11-7
LEFT AND RIGHT HAND PICK MODULE 4 HIGH ................................................ 11-8
PICK MODULE MISCELLANEOUS PARTS ............................................................ 11-9
S1 DISPENSER CONTROL BOARD ........................................................................ 11-10
DOUBLE PICK I / F CONTROL BOARD ASSEMBLY .......................................... 11-11
SINGLE PICK I / F PCB ASSEMBLY ...................................................................... 11-11
INTERPICK HARNESS ............................................................................................. 11-12
SAFE MODULE HARNESS ...................................................................................... 11-13
MITIGATION DISPENSER HARNESS.................................................................... 11-13
RH DISPENSER ATM SECURITY ........................................................................... 11-14
RH DISPENSER REPLENISHMENT SECURITY ................................................... 11-15
UL, CEN AND CEN - L FLUIDITI SWITCH ENABLE........................................... 11-16
FLUIDITI MISCELLANEOUS PARTS..................................................................... 11-17
UL, CEN AND CEN L PENETRATION DETECT ................................................... 11-18
ICS PRODUCT HARNESS ........................................................................................ 11-19
ICS RETRACTION HARNESS ................................................................................. 11-19
MULTI PENETRATION MAT HARNESS ............................................................... 11-20
EXPLOSION DETECTION........................................................................................ 11-20
SERVICE ENGINEER ACCESS TAG ...................................................................... 11-21
Chapter 12: Display
INTRODUCTION ......................................................................................................... 12-1
12.1 INCH FDK ASSEMBLY ...................................................................................... 12-2
15 INCH FDK ASSEMBLY ......................................................................................... 12-3
12 INCH TOUCHSCREEN .......................................................................................... 12-4
15 INCH TOUCHSCREEN ......................................................................................... 12-5
12.1 INCH DISPLAYS ................................................................................................. 12-6
15 INCH DISPLAYS .................................................................................................... 12-7
Chapter 13: Envelope Depository & Dispenser
INTRODUCTION ......................................................................................................... 13-1
DEPOSITORY MODULE (VIEW 1 OF 2) .................................................................. 13-2
DEPOSITORY MODULE (VIEW 2 OF 2) .................................................................. 13-3
DEPOSITORY CAPTURE BINS ................................................................................. 13-4
ENVELOPE DISPENSER ............................................................................................ 13-5
RETRACTION ASSEMBLY........................................................................................ 13-6
USB PPD CONTROL BOARD TOP LEVEL ASSEMBLY........................................ 13-7
USB TYPE A TO TYPE MINI B HIGH SPEED 3000MM ......................................... 13-7
POWER ADAPTOR HARNESS .................................................................................. 13-8
ENVELOPE DEPOSIT CONTROL HARNESS .......................................................... 13-9
TI DEPOSIT BIN HARNESS ....................................................................................... 13-9
ENVELOPE DISPENSER CONTROL HARNESS ................................................... 13-10
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
vii
6632 Parts Identification Manual
Table of Contents
Chapter 14: External Cabling
INTRODUCTION ......................................................................................................... 14-1
REMOTE STATUS INDICATOR ASSEMBLY ......................................................... 14-2
REMOTE DEVICES HARNESS ................................................................................. 14-2
EUROPEAN CORD SET.............................................................................................. 14-3
POWER CORD SET (SJT) ........................................................................................... 14-3
Chapter 15: Harnesses
INTRODUCTION ......................................................................................................... 15-1
MAINS SWITCH HARNESS ....................................................................................... 15-2
AC INLET HARNESS .................................................................................................. 15-3
AC DISTRIBUTION POWER CORD (1000MM) ....................................................... 15-3
TWIN DC HARNESS ................................................................................................... 15-4
VX4 TOPBOX HARNESS ........................................................................................... 15-5
VX4 FASCIA HARNESS ............................................................................................. 15-6
VX4 FASCIA MEI HARNESS..................................................................................... 15-6
FDK FASCIA HARNESS ............................................................................................ 15-7
DIGITAL CAMERA HARNESS.................................................................................. 15-7
VIDEO CABLE STRAIGHT / 45 DEGREE 2200MM ............................................... 15-8
CAMERA VIDEO SYNC ADAPTOR HARNESS ..................................................... 15-8
HIGH POWER DC DISTRIBUTION HARNESSES ................................................... 15-9
HIGH POWER DC- DC HARNESS ............................................................................ 15-9
LOW POWER DC DISTRIBUTION HARNESS ...................................................... 15-10
USB TYPE A TO TYPE MINI B HIGH SPEED CABLE ........................................ 15-10
RJ11 - RJ11 CABLE ................................................................................................... 15-11
Chapter 16: Keyboards
INTRODUCTION ......................................................................................................... 16-1
ALPHA KEYBOARD ASSEMBLY ............................................................................ 16-2
Chapter 17: Miscellaneous Interface
INTRODUCTION ......................................................................................................... 17-1
UNIVERSAL MISCELLANEOUS INTERFACE BOARD TOP LEVEL ASSY ....... 17-2
RIO ENABLE HARNESS ............................................................................................ 17-2
viii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Table of Contents
Chapter 18: Operator Interface
INTRODUCTION ......................................................................................................... 18-1
UOP ASSEMBLY WITH NCR LOGO ........................................................................ 18-2
DVI - D SINGLE LINK CABLE ASSEMBLY (3M)................................................... 18-2
Chapter 19: Power Supply
INTRODUCTION ......................................................................................................... 19-1
SWITCH MODE POWER SUPPLY 600W + 24V ...................................................... 19-2
UNIVERSAL UPS POWER SUPPLY ......................................................................... 19-3
DC DISTRIBUTION ASSEMBLY .............................................................................. 19-4
Chapter 20: Printers
INTRODUCTION ......................................................................................................... 20-1
RECEIPT PRINTER WITH AND WITHOUT CAPTURE ......................................... 20-2
THERMAL JOURNAL PRINTER ............................................................................... 20-3
HITACHI PAGE TURN PASSBOOK PRINTER ........................................................ 20-4
SERIAL P/T PTR COMMS HARNESS ....................................................................... 20-5
STATEMENT PRINTER (SCOTSCRAIG SLIM SINGLE SHEET OPEN) .............. 20-6
STATEMENT PRINTER (SCOTSCRAIG SLIM BUNCH PRESENT OPEN) ......... 20-7
3M PARALLEL IEEE 1284 COMPLIANT CABLE ASSEMBLY ............................. 20-8
Chapter 21: Security Enclosures
INTRODUCTION ......................................................................................................... 21-1
ELECTRONIC COMBINATION SAFE LOCK .......................................................... 21-2
KEYLOCK TO UL 437 STANDARD.......................................................................... 21-3
KEYLOCK S & G ......................................................................................................... 21-4
3 WHEEL COMBINATION LOCK GROUP 2M........................................................ 21-5
3 WHEEL COMBINATION LOCK GROUP 2M WITH KEYLOCK ........................ 21-6
3 WHEEL COMBINATION LOCK GROUP 2M WITH SILENT ALARM .............. 21-7
STANDARD 3 WHEEL UL GROUP 2 COMBINATION LOCK ............................. 21-8
STANDARD 3 WHEEL UL GROUP 2 COMBINATION
LOCK WITH SILENT ALARM .................................................................................. 21-9
CONTROLLED ACCESS SAFE LOCK .................................................................... 21-10
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
ix
6632 Parts Identification Manual
Table of Contents
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Introduction
Table of Contents
Introduction
MANUAL ORGANISATION......................................................................................... 1-1
Headers and Footers.................................................................................................... 1-1
Manual and Chapter Name .................................................................................... 1-1
Page Numbering..................................................................................................... 1-2
Dates on Pages ....................................................................................................... 1-2
Revision Record.......................................................................................................... 1-2
ASSEMBLIES ................................................................................................................. 1-2
Identification of Assemblies ....................................................................................... 1-2
Sub-assemblies with no Parts Breakdown .................................................................. 1-2
Multiple Views ........................................................................................................... 1-2
PARTS LISTS ................................................................................................................. 1-2
Columns in Parts Lists ................................................................................................ 1-2
Indented Parts Lists..................................................................................................... 1-3
References to Contents ............................................................................................... 1-3
Reference Letter Beginning with Z ......................................................................... 1-3
Recommended Spare Parts ......................................................................................... 1-4
Components Identified by Schematic Symbol............................................................ 1-4
FEATURES ..................................................................................................................... 1-4
UPDATES ....................................................................................................................... 1-4
July 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1-i
6632 Parts Identification Manual
Introduction
1-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
July 2007
6632 Parts Identification Manual
Introduction
Table of Contents
Introduction
This manual is designed to provide complete identification of all parts which may be
replaced in the unit.
MANUAL ORGANISATION
This publication is divided into the following chapters:
Chapter 1 - Introduction
Chapter 2 - Alarms
Chapter 3 - Audio
Chapter 4 - Auto Supervisor Entry
Chapter 5 - Cabinetry
Chapter 6 - Card Reader
Chapter 7 - Coin Dispenser
Chapter 8 - Core
Chapter 9 - Cheque Processing Module
Chapter 10 - Currency Deposit
Chapter 11 - Currency Dispenser
Chapter 12 - Display
Chapter 13 - Envelope Depository & Dispenser
Chapter 14 - External Cabling
Chapter 15 - Harnesses
Chapter 16 - Miscellaneous Interface
Chapter 17 - Operator Interface
Chapter 18 - Power Supply
Chapter 19 - Printers
Chapter 20 - Security Enclosures
Each chapter contains information relating to specific parts of the ATM. In addition to the
manual contents each chapter also has its own table of contents.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1-1
6632 Parts Identification Manual
Introduction
Headers and Footers
Manual and Chapter Name
In the header at the top of each page is the name of this manual followed by the name of
the chapter.
Page Numbering
Pages are numbered with the chapter number and page number, split by a dash. For
example, page one of chapter three is numbered 3-1.
Dates on Pages
At the bottom of each page is a date. This is the revision date of the chapter containing that
page. All pages in a chapter have the same date, even if only one page has changed since
the last revision.
Revision Record
The Revision Record preceding the main contents pages, gives a list of all changes to this
manual since first publication.
ASSEMBLIES
Identification of Assemblies
Identification of a complete assembly, including the 10-digit number assigned to it, is
included as the first line in the parts list. The entry for the complete assembly is not
identified by a reference letter.
Sub-assemblies with no Parts Breakdown
Some sub-assemblies must be ordered us units; individual parts composing these
assemblies are not available. Because of critical adjustments and assembly techniques
requiring special equipment, these sub-assemblies are prepared in the factory as units for
shipment to the field. Such units are identified in this manual as individual parts with no
further breakdown.
Multiple Views
Some complex assemblies are illustrated by different views on several adjacent pages.
Parts not referenced in one view of an assembly are referenced in another. Multiple views
are designated by a notation in the title; Cabinet Assembly (View 1 of 3), for example,
indicates that this page contains the first of three different views of the same assembly.
1-2
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Introduction
PARTS LISTS
Columns in Parts Lists
A parts list consists of three columns. The first column is the reference number identifying
the part in the illustration. The second column is the part number, and the third column is
the part name.
Indented Parts Lists
Indented parts lists identify sub-assemblies and their parts when they are included within a
larger assembly. Indented parts lists are recognized by one or more bullets (.) preceding
the part name, and the reference callouts being a combination of numeric and alphabetic
characters. This indicates that the indented item is part of the preceding assembly, but can
be ordered and replaced separately. This applies regardless of the number of indentations.
For example:
4
4A
4B
4B1
4B2
000-0001572
000-0001575
000-0001575
000-0001575
000-0001575
Gear Assy (B)
.Gear
.Hub Assy (E)
..Hub
..Bearing
The preceding example shows that the Gear Assembly (Ref. 4) comes with the Gear (Ref.
4A) and Hub Assembly (Ref. 4B) assembled. The Hub Assembly comes with the Hub
(Ref. 4B1) and Bearing (Ref. 4B2) assembled. Any one of the parts can be ordered
separately. The letter in parentheses at the end of an assembly name is used by the
Information Solutions Group in updating the manual.
References to Contents
Some assemblies shown on the illustration are called out with no 10-digit number listed
and a reference made to the contents. This indicates that there is a further breakdown of
the assembly on another page of the manual. Example:
4
See Contents CardDrive Assy
Occasionally, the 10 digit number is given and also a reference is made to the contents. In
this case, the 10-digit number is given as a means of identifying a particular assembly
when there are other assemblies that are similar but not interchangeable. For example:
4
4
000-0021206 CardDrive Assy (See Contents)
000-0022001 CardDrive Assy
Reference Letter Beginning with Z
Generally, all the parts shown on a drawing are part of the assembly represented by the
part name and 10-digit number in the first line of the parts chart. Occasionally, it is
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
1-3
6632 Parts Identification Manual
Introduction
expedient to add miscellaneous parts to a drawing which are not part of the assembly.
These parts are identified by a alpha/numeric reference with the alpha character Z. For
example:
Z1 000-0000000 Screw
Z2 000-0000001 Nut
Recommended Spare Parts
Parts marked with * preceding the item number denote a recommended spare part.
Components Identified by Schematic Symbol
Where appropriate, electrical components may be called out by schematic designation,
rather than by reference number.
FEATURES
A feature is a collection of parts that are related but cannot be ordered as an assembly.
Where a feature is shown there is no 10-digit assembly number. Instead the parts list will
begin with reference number 1.
UPDATES
From time to time you will receive updates as the manual content is changed or added to.
1-4
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Alarms
Table of Contents
Alarms
INTRODUCTION ........................................................................................................... 2-1
STANDARD ALARM SYSTEM ................................................................................... 2-2
ENHANCED ALARM SYSTEM .................................................................................. 2-3
HIGH SECURITY ALARM SYSTEM .......................................................................... 2-4
BASIC ALARMS WITH STATUS ASSEMBLY .......................................................... 2-5
ENHANCED ALARMS WITH STATUS ASSEMBLY................................................ 2-5
ALARMS BASIC AND ENHANCED WITH STATUS ASSEMBLY ......................... 2-6
BASIC ALARMS HARNESS......................................................................................... 2-6
UX DOOR SWITCH HARNESS.................................................................................... 2-7
ATHENA ALARMS HARNESS .................................................................................... 2-7
ENHANCED ALARMS HARNESS .............................................................................. 2-8
DOOR SWITCH HARNESS (RAL)............................................................................... 2-8
MAS HAMILTON HARNESS ....................................................................................... 2-9
DISK TAMPER HARNESS ........................................................................................... 2-9
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
2-i
6632 Parts Identification Manual
Alarms
2-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Alarms
Table of Contents
Chapter 2
Alarms
INTRODUCTION
This chapter covers the NCR 6632 ATMs Alarm Systems.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
2-1
6632 Parts Identification Manual
Alarms
STANDARD ALARM SYSTEM
PRIMARY LOCK
3
5
9
1
2
10
4
6
SECONDARY
LOCK
7
8
*
*
*
*
2-2
1
2
3
4
5
SEE CONTENTS
SEE CONTENTS
445-0691449
SEE CONTENTS
009-0005139
BASIC ALARMS HARNESS
ATHENA ALARMS HARNESS
ALARMS BRACKET
BASIC ALARMS WITH STATUS ASSEMBLY
VIBRATION SENSOR
6
* 7
8
9
10
006-0010526
SEE CONTENTS
009-0006155
445-0708396
445-0708397
STANDOFF, PC BOARD (BLIND HOLE)
UX ALARM DOOR SWITCH HARNESS
MAGNET
HARNESS GUIDE
HARNESS GUIDE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Alarms
ENHANCED ALARM SYSTEM
5
PRIMARY LOCK
4
2
6
SECONDARY
LOCK
10
3
*
*
*
*
1
2
3
4
5
11
SEE CONTENTS
SEE CONTENTS
SEE CONTENTS
SEE CONTENTS
009-0006155
ENHANCED ALARMS HARNESS
ENHANCED ALARM WITH STATUS ASSEMBLY
UX ALARMS DOOR SWITCH HARNESS
ATHENA ALARMS HARNESS
MAGNET
6
7
8
9
10
006-0010526
445-0690377
445-0691263
445-0705916
445-0708396
STANDOFF, PC BOARD (BLIND HOLE)
NCR ALARMS PLUNGER
ACTUATOR SUPPORT
PLUNGER ASSEMBLY, CEN-L ALARMS
HARNESS GUIDE
11
445-0708397
HARNESS GUIDE
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
2-3
6632 Parts Identification Manual
Alarms
HIGH SECURITY ALARM SYSTEM
2
4
3
SECONDARY
PRIMARY LOCK
LOCK
10
*
*
*
*
1
2
3
4
5
6
7
8
9
10
2-4
SEE CONTENTS
SEE CONTENTS
SEE CONTENTS
SEE CONTENTS
445-0591539
ALARMS, BASIC AND ENHANCED, WITH STATUS ASSEMBLY
ENHANCED ALARMS HARNESS
ATHENA ALARMS HARNESS
DOOR SWITCH HARNESS (RAL)
NON SILENT ALARM, T / A
006-0010526
009-0006155
009-0023359
445-0708396
445-0708397
STAND OFF, PC BOARD (BLIND HOLE)
MAGNET
ALARM ACTUATOR (CEN 3, 4)
HARNESS GUIDE
HARNESS GUIDE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Alarms
BASIC ALARMS WITH STATUS ASSEMBLY
C7
R5
R6
R12
U1
R20
R21
R23
D3
R4
Q2
D5
R30
VR1
C4
J3
SW1
J1
RLY1
RLY2
RLY4
R28
J2
D1
D2
C5
R16
C6
R25
J4
R18
445-0689109
BASIC ALARMS WITH STATUS ASSEMBLY
ENHANCED ALARMS WITH STATUS ASSEMBLY
October 2007
445-0689118
ENHANCED ALARM WITH STATUS ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
2-5
6632 Parts Identification Manual
Alarms
ALARMS BASIC AND ENHANCED WITH STATUS ASSEMBLY
445-0689132
ALARMS BASIC AND ENHANCED WITH STATUS ASSEMBLY
BASIC ALARMS HARNESS
VIBRATION
CONTACT
ALARM
P4
2-6
445-0595423
BASIC ALARMS HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Alarms
UX DOOR SWITCH HARNESS
BOLT_THROWN
ALARM_P2
DOOR_CLOSED
445-0693903
UX DOOR SWITCH HARNESS
ATHENA ALARMS HARNESS
TAMPER
ALARM_P3
RIO BOARD
GND_1
ALARM_O/P
October 2007
445-0709180
ATHENA ALARMS HARNESS (VX4)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
2-7
6632 Parts Identification Manual
Alarms
ENHANCED ALARMS HARNESS
DETECTOR
445-0692914
ENHANCED ALARMS HARNESS
DOOR SWITCH HARNESS (RAL)
DOOR LOCK
SENSOR 1
ALARM
P2
DOOR CLOSED
SENSOR 2
2-8
445-0599848
DOOR SWITCH HARNESS (RAL)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Alarms
MAS HAMILTON HARNESS
ALARM
P1
MAS-HAMILTON
LOCK
445-0692906
MAS HAMILTON HARNESS
DISK TAMPER HARNESS
TAMPER_ALARMS
October 2007
445-0711078
TAMPER
DISK TAMPER HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
2-9
6632 Parts Identification Manual
Table of Contents
Audio
INTRODUCTION ........................................................................................................... 1-1
AUDIO PUBLIC PRIVATE AFA WITH HEADPHONE JACK DETECT (F552) ...... 1-2
3-i
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
3-ii
6632 Parts Identification Manual
Audio
Table of Contents
Chapter 3
Audio
INTRODUCTION
This chapter covers the NCR 6632 ATMs Audio features.
3-1
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Audio
AUDIO PUBLIC PRIVATE AFA WITH HEADPHONE JACK DETECT (F552)
MISC. I/F
J4
AUDIO
SUPERVISOR
SWITCH
2
AUDIO
H / P SOCKET
4
TWO
ONE
*
*
*
*
*
1
2
3
4
5
445-0710182
445-0710181
009-0023315
445-0684946
445-0707118
PRIVATE AUDIO HARNESS
PRIVATE AUDIO ATHENA CAB HARNESS
AUDIO LOOPBACK CABLE
UX EPP ESD LONG HARNESS
AUDIO JACK GASKET
009-0009975
FERRITE EMI SUPPRESSOR
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
3-2
6632 Parts Identification Manual
Audio
3-3
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Auto Supervisor Entry
Table of Contents
Auto Supervisor Entry
INTRODUCTION ........................................................................................................... 4-1
AUTO SUPERVISOR ENTRY (F450) .......................................................................... 4-2
AUTO SUPERVISOR HARNESS WITH PA ................................................................ 4-3
AUTO SUPERVISOR HARNESS WITHOUT PA........................................................ 4-3
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
4-i
6632 Parts Identification Manual
Auto Supervisor Entry
4-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Auto Supervisor Entry
Table of Contents
Chapter 4
Auto Supervisor Entry
INTRODUCTION
This chapter covers the NCR 6632 ATMs Auto Supervisor Entry feature.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
4-1
6632 Parts Identification Manual
Auto Supervisor Entry
AUTO SUPERVISOR ENTRY (F450)
FRONT ACCESS
1
2
REAR ACCESS
1
2
5
4-2
1
2
3
4
5
009-0006620
009-0008697
445-0713486
445-0711982
445-0708557
INTERLOCK SWITCH SPDT
PVC ANTI ROLL CAP
VX4 AUTO SUPERVISOR SWITCH MOUNTING (F/A)
VX4 AUTO SUPERVISOR ACTUATOR (F/A)
AUTO SUPERVISOR MOUNTING BRACKET
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Auto Supervisor Entry
AUTO SUPERVISOR HARNESS WITH PA
NO2
NO
CM2
COM
SUPERVISOR
445-0708542
AUTO SUPERVISOR HARNESS WITH PA
AUTO SUPERVISOR HARNESS WITHOUT PA
MISC. I/F
J4
SUPERVISOR
445-0706592
October 2007
AUTO SUPERVISOR HARNESS WITHOUT PA
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
4-3
6632 Parts Identification Manual
Auto Supervisor Entry
4-4
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cabinetry
Table of Contents
Cabinetry
INTRODUCTION ........................................................................................................... 5-1
F/A SAFE ASSEMBLIES............................................................................................... 5-2
R/A SAFE ASSEMBLIES .............................................................................................. 5-3
VX4 FASCIA ASSEMBLIES ......................................................................................... 5-4
VX4 FASCIA MOULDINGS ......................................................................................... 5-5
REAR DOOR AND OP MOUNTING (WITHOUT 80 COL) ....................................... 5-6
REAR DOOR AND OP MOUNTING (WITH 80 COL)................................................ 5-7
VIDEO CAMERA (NTSC / PAL) .................................................................................. 5-8
2D BARCODE READER ............................................................................................... 5-9
CABINETRY ASSEMBLY (VIEW 1 OF 3)................................................................ 5-10
CABINETRY ASSEMBLY (VIEW 2 OF 3)................................................................ 5-11
CABINETRY ASSEMBLY (VIEW 3 OF 3)................................................................ 5-12
6632 SHUTTER ASSEMBLY ...................................................................................... 5-13
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-i
6632 Parts Identification Manual
Cabinetry
5-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cabinetry
Table of Contents
Chapter 5
Cabinetry
INTRODUCTION
This chapter covers the NCR 6632 ATMs Cabinetry.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-1
6632 Parts Identification Manual
Cabinetry
F/A SAFE ASSEMBLIES
5-2
1
1
1
1
1
445-0713982
445-0713983
445-0713984
445-0713985
445-0713986
CEN 3 SAFE, COMBINATION + KEY (F/A)
CEN 3 SAFE, COMBINATION + COMBINATION (F/A)
CEN 3 SAFE, KEY + KEY (F/A)
CEN 3 SAFE, KEYLOCK ONLY (F/A)
CEN 3 SAFE, LG AUDIT (F/A)
1
1
1
1
1
445-0713987
445-0713988
445-0713989
445-0710990
445-0713752
CEN 3 SAFE, MAS HAMILTON (F/A)
CEN 4 SAFE, COMBINATION + KEY (F/A)
CEN 4 SAFE, KEY + ELECT (F/A)
CEN 3 SAFE, COMBOGUARD (F/A)
VX4 CEN-L ENCLOSURE (F/A)
1
2
445-0713954
445-0707397
VX4 UL ENCLOSURE HLA (F/A)
MOUSE PLATE, ANGLED
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cabinetry
R/A SAFE ASSEMBLIES
October 2007
1
1
1
1
1
445-0713998
445-0713999
445-0714000
445-0714001
445-0714002
CEN 3 SAFE, COMBINATION + KEY (R/A)
CEN 3 SAFE, COMBINATION + COMBINATION (R/A)
CEN 3 SAFE, KEY + KEY (R/A)
CEN 3 SAFE, KEYLOCK ONLY (R/A)
CEN 3 SAFE, LG AUDIT (R/A)
1
1
1
1
1
445-0714003
445-0714004
445-0714005
445-0714006
445-0713756
CEN 3 SAFE, MAS HAMILTON (R/A)
CEN 4 SAFE, COMBINATION + KEY (R/A)
CEN 4 SAFE, KEY + ELECT (R/A)
CEN 3 SAFE, COMBOGUARD (R/A)
VX4 CEN-L ENCLOSURE (R/A)
1
2
445-0713955
445-0707397
VX4 UL ENCLOSURE HLA (R/A)
MOUSE PLATE, ANGLED
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-3
6632 Parts Identification Manual
Cabinetry
VX4 FASCIA ASSEMBLIES
3
2
1
8
4
7
6
*
*
*
*
5-4
1
1
1
1
2
445-0707530
445-0710728
445-0710729
445-0709874
445-0707531
VX4 EXTERNAL FASCIA MOULDING
VX4 EXTERNAL FASCIA BARCODE WINDOW
VX4 EXTERNAL FASCIA ALPHA / BAR WINDOW
VX4 EXTERNAL FASCIA ALPHA KB (MACHINED)
FASCIA FRAME SUBSTRUCTURE HLA
3
4
5
6
6
445-0709221
445-0711026
445-0707529
445-0706239
445-0688763
VX ADVERT PANEL MOUNTING ASSEMBLY
VX4 TB / FASCIA INFILL
VX4 INTERNAL FASCIA MOULDING
ADVERT WINDOW (OPAQUE)
ADVERT WINDOW (CLEAR)
7
8
009-0021970
445-0704734
CCFL ADVERT AND ANGLED TASK LIGHT (VW3)
VX4 BARCODE WINDOW ILLUMINATION
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cabinetry
VX4 FASCIA MOULDINGS
1
*
*
*
*
1
2
3
4
445-0697334
445-0704333
445-0704730
445-0705212
CASH EXIT INTERFACE MOULDING
BLANK INTERFACE MOULDING
80 COL BLANK MOULDING
CPM4 BLANK MOULDING
*
*
5
6
445-0704177
445-0704178
RECEIPT EXIT MOULDING (FRONT)
RECEIPT EXIT MOULDING (REAR)
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-5
6632 Parts Identification Manual
Cabinetry
REAR DOOR AND OP MOUNTING (WITHOUT 80 COL)
4
2
5-6
1
2
3
4
5
445-0710982
445-0708650
445-0705379
009-0023553
445-0709393
REAR DOOR
ATHENA HINGE
FIXED GOP BRACKET
CH 751 KEYLOCK
CAM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cabinetry
REAR DOOR AND OP MOUNTING (WITH 80 COL)
3
2
4
5
6
October 2007
1
2
3
4
5
445-0710983
445-0708650
445-0705803
445-0711286
445-0707427
REAR DOOR (WINDOW)
ATHENA HINGE
GOP WINDOW
GOP SUPPORT BRACKET
GOP BACK PLATE ASSEMBLY
6
7
8
009-0023553
445-0709393
009-0020647
CH 751 KEYLOCK
CAM
CONSTANT TORQUE FRICTION HINGE (2.2Nm)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-7
6632 Parts Identification Manual
Cabinetry
VIDEO CAMERA (NTSC / PAL)
JP
2
*
*
5-8
1
1
2
009-0023053
009-0023055
445-0709057
CAMERA CCD (NTSC)
CAMERA CCD (PAL)
CAMERA MOUNTING BRACKET (VX4)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cabinetry
2D BARCODE READER
1
7
8
*
*
*
October 2007
1
2
3
4
5
009-0023539
445-0708894
445-0709060
445-0712983
445-0709958
USB 2D BARCODE READER MODULE (UBAR)
VX4 BARCODE SUPPORT
BARCODE PCB MOUNTING ASSEMBLY
UBAR ILLUMINATION IR LED DRIVER ASSEMBLY
HOUSING ILLUMINATION AND BARCODE
6
7
8
445-0709955
445-0704173
445-0705298
UBAR IR LED PCB CAD ASSEMBLY
NARROW GLASS INSERT (UBAR)
VW3 BARCODE GASKET
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-9
6632 Parts Identification Manual
Cabinetry
CABINETRY ASSEMBLY (VIEW 1 OF 3)
1
4
3
7
8
12
9
10
5-10
11
1
2
3
4
5
445-0704580
445-0710977
445-0676081
445-0686465
445-0707538
VX4 LID
SIDE PANEL
PRIVACY WING
REAR PANEL
FASCIA, CROSS MEMBER TOP FRAME
6
7
8
9
10
445-0688015
445-0705976
445-0704266
445-0690777
445-0708498
PC CORE STRUT (SIDE)
VX BRACE RA
D/S FOAM STRIP
HINGE, CONTINUOUS
CEN HINGE BRACKET ASSEMBLY
11
12
13
009-0011101
445-0711027
445-0711028
MAGNETIC CATCH 60MM
CEN FA LHS INFILL
CEN FA RHS INFILL
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
13
October 2007
6632 Parts Identification Manual
Cabinetry
CABINETRY ASSEMBLY (VIEW 2 OF 3)
14
15
18
19
17
20
16
21
28
23
30
22
27
24
26
* 14
15
16
17
18
009-0022910
445-0689943
445-0710928
009-0023431
445-0707671
POWER LINE FILTER
MAINS FILTER COVER ASSEMBLY
SAFE EARTH STUD
FUSE HOLDER, BAYONET CAP (5 X 20 MM)
HUB COVER
19
20
* 21
22
23
445-0711166
445-0705548
445-0711916
009-0023272
009-0003353
DC DISTRIBUTION MOUNTING BRACKET
USB HUB MOUNTING BRACKET
USB HUB TOP LEVEL ASSEMBLY
AXIAL FAN 24V DC
FAN GRILL
24
25
26
27
28
009-0023396
009-0022942
009-0023877
009-0023878
445-0706167
SPEAKER 16 OHMS
LOUDSPEAKER
ROTARY LATCH STANDARD (RH)
ROTARY LATCH STANDARD (LH)
FASCIA SAFE SUPPORT
29
30
445-0709151
445-0709152
FIXED DISPLAY BRACKET ASSEMBLY (FA)
FIXED DISPLAY BRACKET ASSEMBLY (RA)
October 2007
29
25
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-11
6632 Parts Identification Manual
Cabinetry
CABINETRY ASSEMBLY (VIEW 3 OF 3)
35
36
31
37
34
32
38
39
33
40
5-12
31
32
33
34
35
445-0686113
445-0695474
445-0708934
445-0689992
445-0711538
CORE SHELF
PCB SHELF
VX MODULE TRAY ASSEMBLY
HINGE PLATE ASSEMBLY
GAS SPRING 1900 BRACKET ASSEMBLY
* 36
37
38
39
40
009-0023106
009-0023196
445-0713408
445-0711030
445-0706163
VX4 GAS SPRING
4 WAY AC DISTRIBUTION BLOCK
KEYBOARD SECURITY PLATE ASSEMBLY
KEYBOARD REAR SUPPORT
SHELF SPACER
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cabinetry
6632 SHUTTER ASSEMBLY
*
*
*
*
*
October 2007
1
2
3
4
5
445-0708830
445-0708829
009-0023519
445-0712931
445-0709012
LOWER MOTOR SHUTTER ASSEMBLY (RHS)
LOWER MOTOR SHUTTER ASSEMBLY (LHS)
STEPPER MOTOR 7.5 DEG.
I2c CASH SHUTTER TOP LEVEL ASSEMBLY
GBRU SHUTTER I/F TOP ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
5-13
6632 Parts Identification Manual
Cabinetry
5-14
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Card Reader
Table of Contents
Card Reader
INTRODUCTION ........................................................................................................... 6-1
U-IMCRW ....................................................................................................................... 6-2
LFCC ASSEMBLY ......................................................................................................... 6-3
ATHENA SENSOR HARNESS ..................................................................................... 6-4
OPEN BIN ....................................................................................................................... 6-5
MCRW MM / CIM ENABLE STAGE 1 ASSEMBLY .................................................. 6-6
UNIVERSAL 12V REGULATOR ................................................................................. 6-7
UNIVERSAL 5V REGULATOR ................................................................................... 6-7
MM SENSOR HARNESS............................................................................................... 6-8
MM SENSOR EXTENSION CABLE 4M...................................................................... 6-8
MM TO STAGE 1 PCB CABLE ASSEMBLY .............................................................. 6-9
CIM TO STAGE 1 PCB CABLE ASSEMBLY ............................................................. 6-9
SMART DIP READER ................................................................................................. 6-10
LOW POWER DC DISTRIBUTION HARNESS 2000MM ........................................ 6-11
USB TYPE A TO MINI B HIGH SPEED CABLE 2000MM 480MBPS .................... 6-11
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6-i
6632 Parts Identification Manual
Card Reader
6-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Card Reader
Table of Contents
Chapter 6
Card Reader
INTRODUCTION
This chapter covers the NCR 6632 ATMs U-IMCRW and Smart Dip Card Readers.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6-1
6632 Parts Identification Manual
Card Reader
U-IMCRW
2
3
6-2
*
*
*
*
*
1
1
1
2
3
445-0704479
445-0704481
445-0704484
009-0022326
009-0022325
U-IMCRW TK2, STANDARD SHUTTER
U-IMCRW TK123,STANDARD SHUTTER
U-IMCRW 3TK HICO WITH SMART, STANDARD SHUTTER
IC BLOCK
STANDARD SHUTTER
*
*
4
5
445-0598553
009-0020071
6
7
009-0023198
445-0706466
MCRW GASKET
RECHARGEABLE BATTERY ASSEMBLY, NICKEL METAL HYDRIDE
12.6V
U-IMCRW UPPER & LOWER MEEI ASSEMBLY
MCRW SHUTTER
8
9
445-0690746
445-0710101
EXTENSION SPRING
MCRW SHUTTER HOOK
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Card Reader
LFCC ASSEMBLY
October 2007
1
2
3
4
5
445-0708492
445-0688643
445-0708939
445-0691307
445-0689471
LFCC CRADLE, SUB ASSEMBLY
BIN ASSEMBLY
LFCC TRAPDOOR ASSEMBLY (VX)
SPACER PLATE
SCREW PLATE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6-3
6632 Parts Identification Manual
Card Reader
ATHENA SENSOR HARNESS
P2
SW1
P3
P7
6-4
445-0710591
ATHENA SENSOR HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Card Reader
OPEN BIN
October 2007
445-0607051
CARD BIN
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6-5
6632 Parts Identification Manual
Card Reader
MCRW MM / CIM ENABLE STAGE 1 ASSEMBLY
*
*
*
6-6
1
2
3
445-0691716
009-0023077
009-0018452
IMCRW CIM / MM BRACKET
RS232 / CURRENT LOOP CONVERTER
CIM / MM TURNAROUND PLUG FOR IMCRW
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Card Reader
UNIVERSAL 12V REGULATOR
J1
J2
U1
U2
445-0689504
UNIVERSAL 12V REGULATOR ASSEMBLY
UNIVERSAL 5V REGULATOR
J2
J1
L2
October 2007
445-0708548
UNIVERSAL 5V REGULATOR ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6-7
6632 Parts Identification Manual
Card Reader
MM SENSOR HARNESS
S9
S8
S2
009-0022404
MM SENSOR HARNESS
MM SENSOR EXTENSION CABLE 4M
P2
6-8
009-0022651
P1
MM SENSOR EXTENSION CABLE 4M
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Card Reader
MM TO STAGE 1 PCB CABLE ASSEMBLY
STAGE 1 - P11
009-0022309
MM - BOX
CABLE ASSEMBLY HARNESS FOR MM TO STAGE 1 PCB
CIM TO STAGE 1 PCB CABLE ASSEMBLY
STAGE 1 - P11
October 2007
009-0022310
CIM - BOX
CIM TO STAGE 1 PCB CABLE ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6-9
6632 Parts Identification Manual
Card Reader
SMART DIP READER
*
*
*
6-10
1
2
3
4
445-0704253
445-0688456
445-0688853
445-0699224
U-DIP ASSEMBLY
DIP OMRON INTERFACE
MCRW INSERT GASKET
DIP OMRON SUPPORT BRACKET
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Card Reader
LOW POWER DC DISTRIBUTION HARNESS 2000MM
009-0020742
LOW POWER DC DISTRIBUTION HARNESS 2000MM
USB TYPE A TO MINI B HIGH SPEED CABLE 2000MM 480MBPS
TYPE A
TYPE MINI B
October 2007
009-0020708
USB TYPE A TO TYPE MINI B, HIGH SPEED, 2000MM,
480MBPS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6-11
6632 Parts Identification Manual
Card Reader
6-12
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Coin Dispenser
Table of Contents
Coin Dispenser
INTRODUCTION ........................................................................................................... 7-1
6632 COIN DISPENSER ASSEMBLY (VIEW 1 OF 2)................................................ 7-2
6632 COIN DISPENSER ASSEMBLY (VIEW 2 OF 2)................................................ 7-3
6632 HOPPER ASSEMBLY........................................................................................... 7-4
6632 COIN ROTOR COMBINATIONS ........................................................................ 7-5
6632 COIN DISPENSER PCB ASSEMBLY ................................................................. 7-6
6632 COIN MODULE HARNESS ................................................................................. 7-7
USB 2.0 A TO B RIGHT ANGLE CONNECTOR CABLE ASSEMBLY .................... 7-8
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
7-i
6632 Parts Identification Manual
Coin Dispenser
7-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Coin Dispenser
Table of Contents
Chapter 7
Coin Dispenser
INTRODUCTION
This chapter covers the NCR 6632 ATMS Coin Dispenser feature.
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
7-1
6632 Parts Identification Manual
Coin Dispenser
6632 COIN DISPENSER ASSEMBLY (VIEW 1 OF 2)
8
7
9
10
5
4
11
12
13
3 ( 2 places )
2
1
15
7-2
1
2
3
445-0709056
445-0709277
009-0022874
445-0708316
COIN DISPENSER TRAY
COIN SECURITY LOCK PLATE
3 PART SLIDE, 670MM CLOSED, 791MM EXTENSION
(MODULE TRAY)
FACIA SEAL PLATE
5
6
7
8
9
445-0708315
445-0709061
445-0708318
445-0709276
445-0709278
COIN BOWL
COIN CHUTE INTERFACE
COIN CHUTE
COIN SECURITY LATCH PLATE
COIN SECURITY LOCK BAR
10
11
12
13
14
445-0709279
445-0708320
445-0710064
009-0023328
445-0708628
COIN SECURITY LOCK CAM
SIDE SUPPORT PLATE
COIN HANDLE SUPPORT BRACKET
SLIDE LATCH
HANDLE
15
445-0711319
VX4 MEI COIN COVER
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
14
6632 Parts Identification Manual
Coin Dispenser
6632 COIN DISPENSER ASSEMBLY (VIEW 2 OF 2)
16
17
18
19
20
22
21
*
*
*
*
*
16
17
18
19
20
SEE CONTENTS
998-0912000
998-0911999
998-0911998
SEE CONTENTS
HOPPER ASSEMBLY
HOPPER LID
HOPPER LID FRAME
BIN (CLEAR)
ROTOR
*
*
*
*
21
22
22
22
22
445-0708483
998-0912004
998-0912001
998-0912002
998-0912003
CPM GASKET
EURO COVER / BIN LABEL SET
MEX COVER / BIN LABEL SET
THAI COVER / BIN LABEL SET
TURK COVER / BIN LABEL SET
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
7-3
6632 Parts Identification Manual
Coin Dispenser
6632 HOPPER ASSEMBLY
7-4
Hopper Number
Country
Denomination
* 998-0911967
* 998-0911968
* 998-0911969
* 998-0911970
* 998-0911971
* 998-0911972
* 998-0911973
* 998-0911974
Euro
Euro
Euro
Euro
Euro
Euro
Euro
Euro
0.01
0.02
0.05
0.10
0.20
0.50
1.00
2.00
* 998-0911956
* 998-0911957
* 998-0911958
* 998-0911959
Mexico
Mexico
Mexico
Mexico
5.00
2.00
1
0.50
* 998-0911960
* 998-0911961
* 998-0911962
Thailand
Thailand
Thailand
5.00
1.00
0.25
* 998-0911963
* 998-0911964
* 998-0911965
* 998-0911966
Turkey
Turkey
Turkey
Turkey
1.00
0.25
0.05
0.01
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Coin Dispenser
6632 COIN ROTOR COMBINATIONS
Rotor Number
Country
Denomination
* 998-0911990
* 998-0911991
* 998-0911992
* 998-0911993
* 998-0911994
* 998-0911995
* 998-0911996
* 998-0911997
Euro
Euro
Euro
Euro
Euro
Euro
Euro
Euro
0.01
0.02
0.05
0.10
0.20
0.50
1.00
2.00
* 998-0911979
* 998-0911980
* 998-0911981
* 998-0911982
Mexico
Mexico
Mexico
Mexico
5.00
2.00
1
0.50
* 998-0911983
* 998-0911984
* 998-0911985
Thailand
Thailand
Thailand
5.00
1.00
0.25
* 998-0911986
* 998-0911987
* 998-0911988
* 998-0911989
Turkey
Turkey
Turkey
Turkey
1.00
0.25
0.05
0.01
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
7-5
6632 Parts Identification Manual
Coin Dispenser
6632 COIN DISPENSER PCB ASSEMBLY
*
*
7-6
998-0911977
998-0911978
SB/SERIAL PCB ASSEMBLY
USB PCB ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Coin Dispenser
6632 COIN MODULE HARNESS
USB TYPE B RIGHT ANGLED
COIN DC
DC
USB_TYPE_A
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
7-7
6632 Parts Identification Manual
Coin Dispenser
USB 2.0 A TO B RIGHT ANGLE CONNECTOR CABLE ASSEMBLY
P1
P2
7-8
009-0023708
USB 2.0 A TO B RIGHT ANGLE CONNECTOR ASSEMBLY (4M)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Core
Table of Contents
Core
INTRODUCTION ........................................................................................................... 8-1
PIVAT CORE ASSEMBLY ........................................................................................... 8-2
ATX SOCKET 478 MOTHERBOARD.......................................................................... 8-3
PCI PCCM TOP LEVEL ASSEMBLY .......................................................................... 8-4
PIRAT TOP LEVEL ASSEMBLY ................................................................................. 8-4
UOP PCI GRAPHICS CARD ......................................................................................... 8-5
FLOPPY DISK DRIVE CABLE ASSEMBLY .............................................................. 8-6
ULTRA ATA CABLE ASSEMBLY .............................................................................. 8-6
PIVAT DISK SECURITY HARNESS ........................................................................... 8-7
PIRAT PIVAT HARNESS.............................................................................................. 8-7
PIVAT SLH HARNESS.................................................................................................. 8-8
TALLADEGA CORE ASSEMBLY ............................................................................... 8-9
TALLADEGA MOTHERBOARD ............................................................................... 8-10
TALLADEGA - USB 2.0 4 PORT BREAK OUT ASSEMBLY.................................. 8-11
SERIAL ATA WITH LATCHED CONNECTORS CABLE ASSEMBLY ................. 8-11
PIRAT TALLADEGA HARNESS ............................................................................... 8-12
FLOPPY DISK DRIVE CABLE ASSEMBLY ............................................................ 8-12
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
8-i
6632 Parts Identification Manual
Core
8-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Core
Table of Contents
Chapter 8
Core
INTRODUCTION
This chapter covers the NCR 6632 ATMs PIVAT and Talladega Cores.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
8-1
6632 Parts Identification Manual
Core
PIVAT CORE ASSEMBLY
3
2
*
*
*
*
*
8-2
1
2
3
4
5
445-0709080
009-0023026
009-0022926
009-0023973
009-0023845
ASSEMBLY, DISK SECURITY DOOR (PIVAT)
FLOPPY DISK DRIVE 1.44MB
DVD - ROM / CD - ROM DRIVE
POWER SUPPLY, SWITCHING, 250W, ATX12V
HARD DISK DRIVE IDE 80GB
6
7
8
009-0022893
445-0698052
445-0691157
FAN, 12V DC
PIVAT CORE ASSEMBLY
BRACKET, DISK SECURITY SWITCH
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Core
ATX SOCKET 478 MOTHERBOARD
4,5
6
2,3
7
1
*
*
*
*
*
1
2
3
4
5
009-0022676
009-0022373
009-0022374
009-0022375
009-0022376
ATX SOCKET 478 MOTHERBOARD
INTEL PENTIUM 4 2.8 GHZ EMBEDDED PROCESSOR
INTEL CELERON 2.0 GHZ EMBEDDED PROCESSOR
DIMM, 512 MB, DDR SDRAM, PC2100, CL2.5
DIMM, 1024 MB, DDR SDRAM, PC2100, CL2.5
*
*
6
7
009-0022382
009-0022377
I/O SHIELD FOR ATX SOCKET
HEATSINK WITH FAN, PENTIUM 4
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
8-3
6632 Parts Identification Manual
Core
PCI PCCM TOP LEVEL ASSEMBLY
445-0711089
PCI PCCM TOP LEVEL ASSEMBLY
PIRAT TOP LEVEL ASSEMBLY
D1
J1
SW1
J3
8-4
445-0711315
J2
PIRAT TOP LEVEL ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Core
UOP PCI GRAPHICS CARD
October 2007
009-0022407
UOP PCI GRAPHICS CARD
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
8-5
6632 Parts Identification Manual
Core
FLOPPY DISK DRIVE CABLE ASSEMBLY
P1
009-0019392
P2
FLOPPY DISK DRIVE CABLE ASSEMBLY
ULTRA ATA CABLE ASSEMBLY
P1
BLACK
8-6
009-0019352
P2
GREY
P3
BLUE
ULTRA ATA CABLE ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Core
PIVAT DISK SECURITY HARNESS
SWITCH
BART
445-0693633
PIVAT DISK SECURITY HARNESS
PIRAT PIVAT HARNESS
PIRAT J2
October 2007
445-0710800
PIVAT M/B J17
PIRAT PIVAT HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
8-7
6632 Parts Identification Manual
Core
PIVAT SLH HARNESS
SSPA
BART
MOTHERBOARD
1
MOTHERBOARD
2
8-8
445-0663623
PIVATSLH HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Core
TALLADEGA CORE ASSEMBLY
4
3
2
*
*
*
*
*
October 2007
1
2
3
4
5
445-0709080
009-0023026
009-0023323
009-0023974
009-0023846
ASSEMBLY, DISK SECURITY DOOR (PIVAT)
FLOPPY DISK DRIVE 1.44MB
S-ATA DVD - ROM OPTICAL DRIVE
POWER SUPPLY, SWITCHING, 250W, ATX12V S-ATA
HARD DISK DRIVE S-ATA 80GB
6
7
8
009-0022893
445-0708581
445-0691157
FAN, 12V DC
TALLADEGA CORE ASSEMBLY
BRACKET, DISK SECURITY SWITCH
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
8-9
6632 Parts Identification Manual
Core
TALLADEGA MOTHERBOARD
2
4
*
*
*
*
*
8-10
1
2
3
4
5
497-0451319
009-0023325
009-0023361
009-0023326
445-0708988
INTEL Q965, LGA 775, eATX (TALLADEGA) MOTHERBOARD
INTEL CORE 2 DUO 2.13 GHZ 1066 MHZ FSB- LGA 775 PROCESSOR
DIMM, 512 MB, DDR II SDRAM, PC2-4200, CL4
HEATSINK WITH FAN, CORE 2 DUO / SOLO LG 775
I / O SHIELD, TALLADEGA CORE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Core
TALLADEGA - USB 2.0 4 PORT BREAK OUT ASSEMBLY
P5
P1
P2
P6
P3
P4
009-0023318
USB 2.0, 4 PORT BREAK OUT ASSEMBLY
SERIAL ATA WITH LATCHED CONNECTORS CABLE ASSEMBLY
CON 2
CON 1
October 2007
009-0023321
SERIAL ATA WITH LATCHED CONNECTORS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
8-11
6632 Parts Identification Manual
Core
PIRAT TALLADEGA HARNESS
PIRAT J2
445-0711293
PIVAT M/B J34
PIRAT TALLADEGA HARNESS
FLOPPY DISK DRIVE CABLE ASSEMBLY
P1
8-12
009-0023403
P2
FLOPPY DISK DRIVE CABLE ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cheque Processing Module
Table of Contents
Cheque Processing Module
INTRODUCTION ........................................................................................................... 9-1
6632 CPM4 ASSEMBLY ( VIEW 1 OF 3 ) ................................................................... 9-2
6632 CPM4 ASSEMBLY ( VIEW 2 OF 3 ) ................................................................... 9-3
6632 CPM4 ASSEMBLY ( VIEW 3 OF 3 ) ................................................................... 9-4
CPM 4 RECOMMENDED SPARE PARTS................................................................... 9-5
CPM CALIBRATION DOCUMENTATION SET ........................................................ 9-6
SCANNER COVER CLEANING PACK ....................................................................... 9-6
CPM MODULE HARNESS .......................................................................................... 9-7
CPM MODULE EXTENSION HARNESS .................................................................... 9-7
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
9-i
6632 Parts Identification Manual
Cheque Processing Module
9-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Cheque Processing Module
Table of Contents
Chapter 9
Cheque Processing Module
INTRODUCTION
This chapter covers the NCR 6632 ATMs Cheque Processing Module.
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
9-1
6632 Parts Identification Manual
Cheque Processing Module
6632 CPM4 ASSEMBLY ( VIEW 1 OF 3 )
3
2
4
5
6
9-2
009-0022874
009-0022117
009-0023328
3 PART SLIDE, 670MM CLOSED, 791MM EXTENSION
(MODULE TRAY)
3 PART SLIDE, 670MM CLOSED, 850MM EXTENSION
(MODULE TRAY COMMON)
SLIDE LATCH
3
4
5
6
445-0705250
445-0698841
445-0698989
445-0684585
CPM STRUT
ESD WIPER
ESD WIPER ADAPTER
CPM4 ESD COVER
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Cheque Processing Module
6632 CPM4 ASSEMBLY ( VIEW 2 OF 3 )
8
9
10
11
13
14
12
*
*
7
8
9
10
11
445-0707734
009-0022535
445-0710302
009-0020692
445-0705280
CPM SHUTTER ASSEMBLY ( FRU )
MEI FOR UNIVERSAL PRODUCTS
ATHENA 33 SMALL CHAIN LINK
HARNESS CHAIN END BRACKET SET ( 10MM WIDE )
CPM IGUS ATTACHMENT R/A
12
* 13
14
445-0684162
445-0708483
445-0697341
CPM IGUS ATTACHMENT F/A
CPM GASKET
CPM MOULDING
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
9-3
6632 Parts Identification Manual
Cheque Processing Module
6632 CPM4 ASSEMBLY ( VIEW 3 OF 3 )
17
16
15
18
15
16
17
18
9-4
445-0710060
445-0710950
445-0711420
484-0095780
CPM PLUNGER MOUNTING
FIX DISP BKT (3RD SLIDE) F/A
LANCE BKT (3RD SLIDE)
STACKING BIN CARRIER ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Cheque Processing Module
CPM 4 RECOMMENDED SPARE PARTS
3
4
5A
*
*
*
*
*
5B
1
2
3
4
5
484-0097397
484-0095779
484-0097730
484-0069197
484-0097016
CPM4 MODULE, SLE NO STAMP
CPM4 SINGLE STACKING BIN (SINGLE ASSEMBLY W / P
CPM4 INFEED ASSEMBLY SHORT
NODDING ADAPTER BRACKET
CPM2 & CPM3 SINGLE LINE ENDORSER
5A
5B
* 6
* 6
REFERENCE
REFERENCE
484-0068698
484-0068699
. SINGLE LINE ENDORSER
. CPM ENDORSER BOARD ASSEMBLY
CASSETTE RIBBON, SLE PURPLE
CASSETTE RIBBON, SLE BLACK
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
9-5
6632 Parts Identification Manual
Cheque Processing Module
CPM CALIBRATION DOCUMENTATION SET
1
CPM Camera Calibration Document, NCR 484-0068352
1A
1C
1B
DFD Calibration Document, NCR 484-0090262
NO ENGINEERING
DRAWING AVAILABLE
NO ENGINEERING
DRAWING AVAILABLE
1D
1E
1
1A
1B
1C
1D
484-0092469
484-0092462
484-0090262
484-0068352
484-0091784
CPM CALIBRATION DOCUMENTATION SET
. CALIBRATION DOCUMENT, MICR E13B
. CPM DOUBLE FEED SETUP DOCUMENT
. CPM CAMERA CALIBRATION DOCUMENT
. CPM FRU CALIBRATION PROCEDURE
1E
484-9000351
. ENVELOPE
SCANNER COVER CLEANING PACK
NO ENGINEERING DRAWING AVAILABLE
009-0018796
9-6
SCANNER COVER CLEANING PACK
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Cheque Processing Module
CPM MODULE HARNESS
DC SHUTTER
DC SAFE
IC2
IC2
DC SHUTTER
DC SAFE
USB TYPE B
USB TYPE A
445-0705087
CPM MODULE HARNESS
CPM MODULE EXTENSION HARNESS
DC SHUTTER
DC SHUTTER
I2C
I2C
445-0709178
CPM MODULE EXTENSION HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
9-7
6632 Parts Identification Manual
Cheque Processing Module
9-8
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Currency Deposit
Table of Contents
Currency Deposit
INTRODUCTION ........................................................................................................... 9-1
GBRU / GBNA TRANSPORT ...................................................................................... 9-2
GBRU / GBNA STABILISER ........................................................................................ 9-3
GBRU / GBNA MODULE ASSEMBLY (VIEW 1 OF 2 ) ............................................ 9-4
GBRU / GBNA MODULE ASSEMBLY ( VIEW 2 OF 2 ) ........................................... 9-5
GBRU / GBNA LOWER BASE CASSETTES .............................................................. 9-6
GBRU / GBNA CURRENCY CASSETTES .................................................................. 9-6
CASSETTE CONFIGURATION PARTS ...................................................................... 9-7
GBRU / GBNA REJECT BINS ...................................................................................... 9-8
GBRU / GBNA MAIN UPPER PCB .............................................................................. 9-9
GBRU / GBNA LOWER PCB ...................................................................................... 9-10
GBRU / GBNA SEPARATOR PCB............................................................................. 9-10
GBRU / GBNA POWER SUPPLY ASSEMBLY ........................................................ 9-11
GBRU / GBNA REED SWITCH BOARD ASSEMBLY............................................. 9-11
GBRU/GBNA MISCELLANEOUS CABINETRY ..................................................... 9-12
GBRU POWER HARNESS .......................................................................................... 9-13
GBRU I2C ENABLE HARNESS ................................................................................. 9-13
INTERLOCK HARNESS ............................................................................................. 9-14
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER ) ......................................... 9-14
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER , UCRN )........................... 9-15
GBRU / GBNA CABLE ASSEMBLY ( BV POWER ) ............................................... 9-15
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-i
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA 100 BASE - T CABLE ( BV LAN ) ................................................... 9-16
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, POWER ).................. 9-16
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, SIGNAL ) ................. 9-17
GBRU / GBNA CABLE ASSEMBLY ( ATM POWER )............................................ 9-17
GBRU / GBNA USB CABLE ASSEMBLY ................................................................ 9-18
GBRU / GBNA CABLE ASSEMBLY (SHUTTER MEI) ........................................... 9-18
6632 BNA RETRACTION ASSEMBLY F/A .............................................................. 9-19
6632 BNA RETRACTION ASSEMBLY R/A TTW .................................................... 9-19
6632 BNA MOUNTING ASSEMBLY (VIEW 1 OF 2)............................................... 9-20
6632 BNA MOUNTING ASSEMBLY (VIEW 2 OF 2) .............................................. 9-21
6634 BNA2 ASSEMBLY ............................................................................................ 9-22
MAIN CPU BOARD (UD600) ..................................................................................... 9-23
MOTOR CONTROLLER (UD600) .............................................................................. 9-23
POWER BOARD (UD600)........................................................................................... 9-24
L SHAPED USB BOARD ............................................................................................ 9-24
BNA2 GARAGE SLIDES............................................................................................. 9-25
BNA2 ATHENA HARNESS ........................................................................................ 9-26
10-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
Table of Contents
Chapter 10
Currency Deposit
INTRODUCTION
This chapter covers the NCR 6632 ATMs Currency Deposit features.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-1
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA TRANSPORT
11
5
6
10
12
13
10-2
1
2
3
445-0688803
445-0686588
009-0022124
009-0023328
HANGER, GBRU LH SLIDES
HANGER, GBRU RH SLIDES
4 PART SLIDE, 585MM CLOSED, 875MM EXTENSION
(GBRU COMMON)
SLIDE LATCH
5
6
7
8
9
445-0692104
445-0699188
445-0698841
445-0699238
445-0712217
CONNECTOR BRACKET
GBRU CRADLE TIE BAR
ESD WIPER
GBRU EARTH WIPER BRACKET
INTERLOCK BRACKET (TTW R/A)
10
11
11
12
13
445-0712218
445-0711001
445-0699110
445-0711000
009-0008697
INTERLOCK BRACKET (F/A)
INTERLOCK COVER (TTW F/A)
INTERLOCK COVER (GBRU VX4 R/A))
GBRU INTERLOCK ACTUATOR
PVC ANTI ROLL CAP
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA STABILISER
CEN
4
3
UL
9
8
DUAL
10
11
1
2
3
4
5
445-0709891
445-0705895
445-0699335
445-0706190
445-0706182
GBRU STABILISER (CENTRE SUPPORT)
GBRU STABILISER (VX4 F/A R/H CEN)
GBRU STABILISER (VX4 R/A R/H CEN)
GBRU STABILISER (VX4 F/A L/H CEN)
GBRU STABILISER (VX4 R/A L/H CEN)
6
7
8
9
10
445-0699195
445-0710350
445-0699139
445-0706183
445-0699196
GBRU ALIGNMENT STUD (CEN)
GBRU STABILISER (CENTRE SUPPORT)
GBRU STABILISER (VX4 F&R, L&RH UL)
GBRU STABILISER (VX4 L/H UL)
GBRU ALIGNMENT STUD (UL)
11
445-0704248
GBRU STABILISER (VX4 DUAL)
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-3
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA MODULE ASSEMBLY (VIEW 1 OF 2 )
1
2
10-4
*
*
*
1
1
2
009-0023554
009-0023555
009-0023701
PRE - ACCEPTOR F/A (178MM)
PRE - ACCEPTOR R/A (140MM)
ASSEMBLY UPPER MODULE (REMOVABLE REJECT BIN. FULL
LINE MAG-SENSOR)
ASSEMBLY UPPER MODULE (REMOVABLE REJECT BIN. FULL
LINE MAG-SENSOR WITH LOWER SENSOR)
009-0023702
009-0023699
009-0023700
009-0023220
ASSEMBLY UPPER MODULE (FIXED REJECT BIN. FULL LINE
MAG-SENSOR)
ASSEMBLY UPPER MODULE (FIXED REJECT BIN. FULL LINE
MAG-SENSOR WITH LOWER SENSOR)
ESCROW AND RESERVOIR
009-0023219
SEPARATOR
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA MODULE ASSEMBLY ( VIEW 2 OF 2 )
9
8
11
10
12
11
*
*
*
*
*
6
7
7
8
9
009-0023221
009-0023225
009-0023226
009-0022167
009-0023222
BV ENTRY TRANSPORT
BV MODULE ( LINE MAGNETIC SENSOR )
BV MODULE ( LINE MAGNETIC + SERIAL NUMBER )
FAN
LOWER TRANSPORT ( BRU4 )
*
*
*
*
*
*
9
9
10
10
10
11
009-0023786
009-0023793
009-0023784
009-0023785
009-0023229
009-0022468
LOWER TRANSPORT ( BNA2 )
LOWER TRANSPORT ( BNA4 )
LOWER MODULE ( GBNA2 )
LOWER MODULE ASSEMBLY ( GBNA4 )
LOWER MODULE ASSEMBLY ( GBRU )
PUSH LATCH
* 12
* 13
009-0022166
009-0022165
DEPOSIT MOTOR ASSEMBLY
RECYCLE MOTOR ASSEMBLY
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-5
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA LOWER BASE CASSETTES
1
2
2
009-0023121
009-0023122
009-0023120
LOWER BASE ( GBNA 2 CASSETTES )
LOWER BASE ( GBNA 4 CASSETTES )
LOWER BASE ( GBRU 4 CASSETTES )
GBRU / GBNA CURRENCY CASSETTES
2, 2A
1
1
* 1
* 1
* 2
* 2A
10-6
009-0023152
009-0022146
009-0022168
009-0023187
RECYCLE CURRENCY CASSETTE ( LIGHT GREY )
DEPOSIT CURRENCY CASSETTE ( BLUE )
KEYLOCK FOR CASSETTE
. CASSETTE KEYLOCK LATCH PLATE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
CASSETTE CONFIGURATION PARTS
LEFT HAND WIDE
NOTE GUIDE
RIGHT HAND WIDE
NOTE GUIDE
SPACER
NARROW NOTE GUIDE
SCREW
SCREW PLATE
October 2007
009-0023703
CASSETTE CONFIGURATION PARTS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-7
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA REJECT BINS
2, 2A
1
1
*
*
*
10-8
1
2
2A
009-0023114
009-0022168
009-0022955
REJECT BIN ( REMOVABLE )
KEYLOCK FOR CASSETTE
. REJECT BIN KEYLOCK LATCH PLATE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA MAIN UPPER PCB
October 2007
009-0022159
GBRU / GBNA MAIN UPPER PCB
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-9
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA LOWER PCB
*
*
009-0023159
009-0023160
LOWER PCB ( GBRU / GBNA 4 )
LOWER PCB ( GBNA 2 )
GBRU / GBNA SEPARATOR PCB
10-10
009-0022160
GBRU / GBNA SEPARATOR PCB
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA POWER SUPPLY ASSEMBLY
009-0022164
GBRU / GBNA POWER SUPPLY ASSEMBLY
GBRU / GBNA REED SWITCH BOARD ASSEMBLY
October 2007
009-0022163
GBRU / GBNA REED SWITCH BOARD ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-11
6632 Parts Identification Manual
Currency Deposit
GBRU/GBNA MISCELLANEOUS CABINETRY
2
3
10-12
1
2
3
4
5
009-0023696
009-0023695
009-0019569
009-0020172
009-0020173
UPPER BASE
GAS STRUT KIT 35 DEGREES
CASSETTE CONNECTOR HARNESS
TIMING BELT ( CARRIER )
TIMING BELT ( MAIN UPPER TRANSPORT )
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
GBRU POWER HARNESS
GBNA_DC
PSU_DEPO_P9
445-0705091
GBRU POWER HARNESS
GBRU I2C ENABLE HARNESS
GBRU_IF_BRD
GBRU
DC
October 2007
445-0706591
GBRU I2C ENABLE HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-13
6632 Parts Identification Manual
Currency Deposit
INTERLOCK HARNESS
COM
INTERLOCK_J1
NO
445-0693609
INTERLOCK HARNESS
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER )
CN8
CN1
CN5
CN11
CN9
CN6
CN2
CN12
CN7
CN10
CN17
CN3
CN4
CN13
CN15
CN14
CN16
10-14
009-0022174
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER )
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER , UCRN )
URNC
URNC
009-0022175
GBRU / GBNA CABLE ASSEMBLY ( SEP TO UPPER, UCRN )
GBRU / GBNA CABLE ASSEMBLY ( BV POWER )
BPWR
BPWR
October 2007
009-0022176
GBRU / GBNA CABLE ASSEMBLY ( BV POWER )
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-15
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA 100 BASE - T CABLE ( BV LAN )
009-0020177
GBRU / GBNA 100 BASE - T CABLE ( BV LAN )
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, POWER )
UPWR
UPWR
10-16
009-0022177
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, POWER )
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, SIGNAL )
UPCN
UPCN
009-0022178
GBRU / GBNA CABLE ASSEMBLY ( LOWER TO UPPER, SIGNAL )
GBRU / GBNA CABLE ASSEMBLY ( ATM POWER )
T1 T2 T3 T4
PWR
PWR
October 2007
009-0023126
GBRU / GBNA CABLE ASSEMBLY ( ATM POWER )
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-17
6632 Parts Identification Manual
Currency Deposit
GBRU / GBNA USB CABLE ASSEMBLY
CN2:TYPE B
CN1:TYPE A
009-0020181
GBRU / GBNA USB CABLE ASSEMBLY
SHT / MEI
SHT
GBRU / GBNA CABLE ASSEMBLY (SHUTTER MEI)
MEI
10-18
009-0022180
GBRU / GBNA CABLE ASSEMBLY (SHUTTER MEI)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
6632 BNA RETRACTION ASSEMBLY F/A
*
*
1
2
3
445-0710999
009-0023391
009-0023328
BNA RETRACTION ASSEMBLY F/A
3 PART SLIDE, 635MM CLOSED, 803MM EXTENSION (BNA)
SLIDE LATCH
6632 BNA RETRACTION ASSEMBLY R/A TTW
1
*
*
October 2007
1
2
3
445-0708573
009-0023391
009-0023328
BNA RETRACTION ASSEMBLY F/A TTW
3 PART SLIDE, 635MM CLOSED, 803MM EXTENSION (BNA)
SLIDE LATCH
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-19
6632 Parts Identification Manual
Currency Deposit
6632 BNA MOUNTING ASSEMBLY (VIEW 1 OF 2)
6
3
4
7
9
10
10-20
1
2
3
4
5
445-0706516
445-0706515
445-0706518
445-0706520
445-0688805
BNA HANGER ASSEMBLY (LH)
BNA HANGER (RH)
BNA FRONT STRAP ASSEMBLY
BNA REAR STRAP ASSEMBLY
BNA2 ISSA TOP COVER
6
7
8
9
10
445-0688806
445-0712114
009-0018859
445-0708628
445-0708636
BNA2 ISSA BOTTOM COVER
ATHENA 44 IGUS ASSEMBLY (MEDIUM)
CHAIN LINK END BRACKET FOR 27MM WIDE LINKS
HANDLE
PCB COVER
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
6632 BNA MOUNTING ASSEMBLY (VIEW 2 OF 2)
12
13
15
11
14
16
17
18
19
20
* 11
* 12
* 13
14
15
445-0706539
009-0022535
445-0707713
445-0708590
445-0707197
BNA INTERFACE MOULDING
MEI FOR UNIVERSAL PRODUCTS
MEI CARRIER MOULDING
BNA INTERLOCK BRACKET ASSEMBLY
HARNESS MOUNTING BRACKET
16
* 17
18
19
20
445-0691518
009-0022809
445-0692170
445-0708987
445-0706538
SWITCH INTERLOCK BRACKET
PANEL MOUNT PUSHBUTTON SWITCH DPST 16A
BNA SWITCH COVER
BNA2 STUD (CEN L)
POST STUD (SHORT)
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-21
6632 Parts Identification Manual
Currency Deposit
6634 BNA2 ASSEMBLY
2
( LONG INLET SHOWN )
7, 12
R
F
10
11
10-22
ITEM 13
*
*
*
*
*
1
1
2
3
4
009-0021685
009-0021686
009-0023890
009-0023892
009-0023891
MID INLET UD686
LONG INLET UD686
REJECT BLOCK UD600 SERIES
FEED BLOCK UD600
MAIN TRANSPORT UNIT UD600 SERIES
*
*
*
5
6
7
009-0023968
009-0022984
009-0023724
009-0021710
ESCROW UNIT (POLYMER)
GARAGE DOOR ASSEMBLY (R/A) ENHANCED
RECOGNITION UNIT UD6OO, UD50 (ABV + ABV BOARD)
(MATCHING SERIAL NUMBERS)
FRONT CASSETTE UD600 SERIES
*
*
*
*
*
9
10
11
12
13
009-0021709
009-0023894
009-0021714
009-0023742
009-0018973
REAR CASSETTE UD600 SERIES
GARAGE INNER BLOCK UD686
SERIAL & POWERBLOCK UD600 SERIES
MBV FRU
UD686 CASSETTE LOCK & KEY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
MAIN CPU BOARD (UD600)
009-0023970
MAIN CPU BOARD (UD600)
MOTOR CONTROLLER (UD600)
October 2007
009-0021711
MOTOR CONTROLLER (UD600)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-23
6632 Parts Identification Manual
Currency Deposit
POWER BOARD (UD600)
009-0021712
POWER BOARD (UD600)
L SHAPED USB BOARD
10-24
009-0023819
L SHAPED USB BOARD
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Deposit
BNA2 GARAGE SLIDES
1A
1
*
*
October 2007
1
1A
009-0021719
009-0021720
GARAGE OUTER UNIT - INCLUDING SLIDES (UD686 & 686M)
. GARAGE SLIDES (UD686 & 686M)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
10-25
6632 Parts Identification Manual
Currency Deposit
BNA2 ATHENA HARNESS
GBRU_I/F_BRD
GBRU_I/F_DC
SHUTTER
BNA_RS232
BNA_ILOCK_COM2
BNA_PWR
BNA_CTRL_BRD
BNA_ILOCK_NO2
BNA_ILOCK_NO1
BNA_ILOCK_COM1
SHUTTER
PC_CORE_RS232
GBRU_DEPO_P9
GBRU_I/F_DC
445-0707544
10-26
BNA2 ATHENA HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
Table of Contents
Currency Dispenser
INTRODUCTION ......................................................................................................... 10-1
F/A RETRACT ASSEMBLY ....................................................................................... 10-2
R/A RETRACT ASSEMBLY ....................................................................................... 10-3
F/A PRESENTER ASSEMBLY ................................................................................... 10-4
R/A PRESENTER ASSEMBLY................................................................................... 10-5
LEFT AND RIGHT HAND PICK MODULE 2 HIGH ................................................ 10-6
LEFT AND RIGHT HAND PICK MODULE 3 HIGH ................................................ 10-7
LEFT AND RIGHT HAND PICK MODULE 4 HIGH ................................................ 10-8
PICK MODULE MISCELLANEOUS PARTS ............................................................ 10-9
S1 DISPENSER CONTROL BOARD ........................................................................ 10-10
DOUBLE PICK I / F CONTROL BOARD ASSEMBLY .......................................... 10-11
SINGLE PICK I / F PCB ASSEMBLY ...................................................................... 10-11
INTERPICK HARNESS ............................................................................................. 10-12
SAFE MODULE HARNESS ...................................................................................... 10-13
MITIGATION DISPENSER HARNESS.................................................................... 10-13
RH DISPENSER ATM SECURITY ........................................................................... 10-14
RH DISPENSER REPLENISHMENT SECURITY ................................................... 10-15
UL, CEN AND CEN - L FLUIDITI SWITCH ENABLE........................................... 10-16
FLUIDITI MISCELLANEOUS PARTS..................................................................... 10-17
UL, CEN AND CEN L PENETRATION DETECT ................................................... 10-18
ICS PRODUCT HARNESS ........................................................................................ 10-19
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-i
6632 Parts Identification Manual
Currency Dispenser
ICS RETRACTION HARNESS ................................................................................. 10-19
MULTI PENETRATION MAT HARNESS ............................................................... 10-20
EXPLOSION DETECTION........................................................................................ 10-20
SERVICE ENGINEER ACCESS TAG ...................................................................... 10-21
11-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
Table of Contents
Chapter 11
Currency Dispenser
INTRODUCTION
This chapter covers the NCR 6632 ATMs Currency Dispenser feature.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-1
6632 Parts Identification Manual
Currency Dispenser
F/A RETRACT ASSEMBLY
1D
1A
1B
11-2
1C
1E
1G
1F
1H
1
* 1A
445-0705500
009-0022119
1B
1C
445-0708628
445-0708307
RETRACTION ASSEMBLY F/A
. 3 PART SLIDE, 700MM CLOSED, 850MM EXTENSION
(PERSONAS PLUS DISPENSER)
. HANDLE
.LATCH ASSEMBLY
1D
1E
1F
* 1G
1H
445-0689955
445-0589073
445-0706097
009-0006620
445-0705492
.TAB LATCH
. SPRING
. INTERLOCK ASSEMBLY
. INTERLOCK SWITCH SPDT
. INTERLOCK COVER
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
R/A RETRACT ASSEMBLY
1A
1G
1B
1C
1D
1F
1E
1H
1
* 1A
445-0705500
009-0022119
1B
1C
445-0708628
445-0708307
RETRACTION ASSEMBLY R/A
. 3 PART SLIDE, 700MM CLOSED, 850MM EXTENSION
(PERSONAS PLUS DISPENSER)
. HANDLE
.LATCH ASSEMBLY
1D
1E
1F
* 1G
1H
445-0589073
445-0689955
445-0706097
009-0006620
445-0705492
. SPRING
.TAB LATCH
. INTERLOCK ASSEMBLY
. INTERLOCK SWITCH SPDT
. INTERLOCK COVER
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-3
6632 Parts Identification Manual
Currency Dispenser
F/A PRESENTER ASSEMBLY
11-4
*
*
1
1
2
3
4
5
445-0714196
445-0714197
445-0618501
009-0005027
445-0587796
009-0005026
F/A PRESENTER ASSEMBLY (120V)
F/A PRESENTER ASSEMBLY (230V)
HAND WHEEL
BELT, SYNCHRONOUS
PULLEY, 48T/28T
BELT, SYNCHRONOUS
*
*
*
*
6
6
7
7
445-0693360
445-0693361
445-0698137
445-0698183
SSR ASSEMBLY (120V WITHOUT FILTER)
SSR ASSEMBLY (240V WITHOUT FILTER)
MOTOR PUMP ASSEMBLY (120V)
MOTOR PUMP ASSEMBLY (230V)
8
9
445-0707097
445-0691864
CONTROL BOARD COVER
PRESENTER COVER (ISR)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
R/A PRESENTER ASSEMBLY
5
6
1
2
3
4
5
445-0712897
445-0618501
009-0005026
009-0005027
445-0587796
R/A PRESENTER ASSEMBLY (SHORT)
HAND WHEEL
BELT, SYNCHRONOUS
BELT, SYNCHRONOUS
PULLEY, 48T/28T
*
*
6
6
7
445-0706572
445-0698183
445-0706553
ELECTRONICS BOX ASSEMBLY (120V)
ELECTRONICS BOX ASSEMBLY (230V)
USB CONTROL BOARD COVER (R/A)
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-5
6632 Parts Identification Manual
Currency Dispenser
LEFT AND RIGHT HAND PICK MODULE 2 HIGH
4
3
6
5
11-6
*
*
*
1
2
3
4
5
445-0707660
445-0612449
009-0007844
445-0634624
445-0587754
DOUBLE PICK ASSEMBLY
AIR FILTER
TEE CONNECTOR
TUBE, VACUUM, 80MM LONG
TUBE, 180MM LONG
6
7
277-0009574
445-0667196
CUP, VACUUM
TUBE, VACUUM 200MM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
LEFT AND RIGHT HAND PICK MODULE 3 HIGH
4
1
9
8
7
*
*
*
*
October 2007
1
2
3
4
5
445-0707660
445-0707702
445-0612449
009-0007844
445-0634624
DOUBLE PICK ASSEMBLY
SINGLE PICK ASSEMBLY
AIR FILTER
TEE CONNECTOR
TUBE, VACUUM, 80MM LONG
6
7
8
9
445-0587753
445-0587754
277-0009574
445-0667196
TUBING, 130MM LONG
TUBE, 180 LONG
CUP, VACUUM
TUBE, VACUUM 200MM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-7
6632 Parts Identification Manual
Currency Dispenser
LEFT AND RIGHT HAND PICK MODULE 4 HIGH
1
5
3
4
8
1
7
6
*
*
*
11-8
1
2
3
4
5
445-0707660
445-0612449
009-0007844
445-0634624
445-0587753
DOUBLE PICK ASSEMBLY
AIR FILTER
TEE CONNECTOR
TUBE, VACUUM, 80MM LONG
TUBING, 130MM LONG
6
7
8
445-0587754
277-0009574
445-0667196
TUBE, 180 LONG
CUP, VACUUM
TUBE, VACUUM 200MM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
PICK MODULE MISCELLANEOUS PARTS
1
2
3
4
October 2007
1
2
3
4
5
445-0689766
445-0689767
445-0689768
445-0689769
445-0705251
TI PLATE (TOP)
TI PLATE (FRONT)
TI PLATE (BOTTOM)
TI PLATE (MIDDLE)
ISR COVER (GEARING RH)
6
7
8
445-0707035
445-0709166
445-0711301
ISR GUARD (REAR ACCESS)
RH DISP COVER PRES / PICK
PICK MODULE COVER (ISR)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-9
6632 Parts Identification Manual
Currency Dispenser
S1 DISPENSER CONTROL BOARD
11-10
445-0712895
S1 DISPENSER CONTROL, TOP LEVEL ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
DOUBLE PICK I / F CONTROL BOARD ASSEMBLY
445-0689219
SW5
SW1
SW6
SW2
SW7
SW3
SW8
SW4
DOUBLE PICK I / F CONTROL BOARD ASSEMBLY
SINGLE PICK I / F PCB ASSEMBLY
J1
C2
SW5
J2
SW6
SW7
SW8
J3
C1
J4
October 2007
445-0689228
SINGLE PICK INTERFACE PCB ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-11
6632 Parts Identification Manual
Currency Dispenser
INTERPICK HARNESS
P2
11-12
445-0616193
P1
INTERPICK HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
SAFE MODULE HARNESS
DC SAFE
I2C
I2C
DC SAFE
USB TYPE MINIB
USB_TYPE_A
445-0705088
SAFE MODULE HARNESS
MITIGATION DISPENSER HARNESS
SW1_NO
SW2_CM
DC_IN
SW2_CM1
AC_IN
SW2_CM2
EARTH
DC_OUT
SW2_NO2
SW2_NO1
AC_OUT
October 2007
445-0707500
MITIGATION DISPENSER HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-13
6632 Parts Identification Manual
Currency Dispenser
RH DISPENSER ATM SECURITY
5
4
6
11-14
1
2
3
4
5
445-0688425
445-0710187
445-0707209
445-0691793
445-0691770
CS TANK (REVISED POTTING)
CS CONTROL MODULE (FSW00046 V2.02)
CONTROL MODULE ADAPTOR BRACKET
IR BRACKET
BOTTOM HARNESS CHANNEL (ARIA 2, 3)
445-0689900
LOOM PROTECTIVE PLATE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
RH DISPENSER REPLENISHMENT SECURITY
2
1
5
6
4
CON1
8
7
October 2007
1
2
3
4
5
445-0688424
445-0710188
445-0707209
445-0691793
445-0698743
ICS TANK (REVISED POTTING)
ICS CONTROL MODULE (FSW0046 V2.02 PDS250 V5.00)
CONTROL MODULE ADAPTOR BRACKET
IR BRACKET
RETENTION MODULE (CHAMPFERED)
6
7
8
445-0691770
445-0664689
445-0689900
BOTTOM HARNESS CHANNEL (ARIA 2, 3)
PROTRACTOR POSITION SHORT HARNESS
LOOM PROTECTIVE PLATE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-15
6632 Parts Identification Manual
Currency Dispenser
UL, CEN AND CEN - L FLUIDITI SWITCH ENABLE
4
1
1
2
3
4
5
11-16
445-0688031
445-0688032
009-0022891
445-0694732
445-0705661
3
2
SWITCH MOUNTING
UL SWITCH TRIGGER
SWITCH MOMENTARY ACTION
LOCK SWITCH BRACKET
DOUBLE SWITCH BRACKET
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
FLUIDITI MISCELLANEOUS PARTS
2
1
3
4
October 2007
1
2
3
4
445-0683657
445-0668149
445-0646011
445-0690379
ICS SUMP, UNIVERSAL
CONTAINMENT MAT
WITHOUT PENETRATION HARNESS
M / SWITCH LOCK MTG
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-17
6632 Parts Identification Manual
Currency Dispenser
UL, CEN AND CEN L PENETRATION DETECT
3
4
6
5
7
8
10
11-18
1
2
3
4
5
445-0706268
445-0706271
445-0708852
445-0706563
445-0706265
PENETRATION MAT, LONG (UL)
PENETRATION MAT, APERTURE BLANK LONG
PENETRATION MAT, APERTURE LONG
PENETRATION MAT, SIDE
PENETRATION MAT, LONG
6
7
8
9
* 10
445-0706271
445-0706270
445-0706561
445-0706559
445-0670010
PENETRATION MAT, APERTURE BLANK LONG
PENETRATION MAT, APERTURE SHORT
PENETRATION MAT, SIDE
PENETRATION MAT, SIDE
TURNAROUND PLUG (ICS)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
ICS PRODUCT HARNESS
BOLT_SW1
BOLT_SW2
DOOR_SW_1_N/O
DOOR_SW_1_COM
DOOR_SW_2_N/O
DOOR_SW_2_COM
ANTI_AXE
SAFE_ICS
GREEN_LED
RED_LED
445-0708627
ICS PRODUCT HARNESS
ICS RETRACTION HARNESS
LED OPT P8
ICS SAFE P1
AA INP P7
SPR2
SPR 1
DOOR INP P3
October 2007
445-0708635
ICS RETRACTION HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-19
6632 Parts Identification Manual
Currency Dispenser
MULTI PENETRATION MAT HARNESS
L/H MAT
CAB_HARNESS
REAR_MAT
APP_MAT
445-0708381
SPARE
R/H MAT
MULTI PENETRATION MAT HARNESS
EXPLOSION DETECTION
2
1
*
*
11-20
1
2
445-0693059
009-0018970
BOMB DETECTOR MODULE
9V ALKALINE BATTERY PP3
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Currency Dispenser
SERVICE ENGINEER ACCESS TAG
445-0664191
October 2007
SERVICE ENGINEER ACCESS TAG
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
11-21
6632 Parts Identification Manual
Currency Dispenser
11-22
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Display
Table of Contents
Display
INTRODUCTION ......................................................................................................... 11-1
12.1 INCH FDK ASSEMBLY ...................................................................................... 11-2
15 INCH FDK ASSEMBLY ......................................................................................... 11-3
12 INCH TOUCHSCREEN .......................................................................................... 11-4
15 INCH TOUCHSCREEN ......................................................................................... 11-5
12.1 INCH DISPLAYS ................................................................................................. 11-6
15 INCH DISPLAYS .................................................................................................... 11-7
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
12-i
6632 Parts Identification Manual
Display
12-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Display
Table of Contents
Chapter 12
Display
INTRODUCTION
This chapter covers the NCR 6632 ATMs Display feature.
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
12-1
6632 Parts Identification Manual
Display
12.1 INCH FDK ASSEMBLY
2,3
5
FASCIA FDK
FDK 1
FDK 2
*
*
*
*
12-2
1
1
1
1
2
445-0711368
445-0711371
445-0711372
445-0711373
445-0708541
12 INCH FDK ASSEMBLY A / G (NCR LOGO)
12 INCH FDK ASSEMBLY A / G W / PRIVACY (NCR LOGO)
12 INCH FDK ASSEMBLY A / R (NCR LOGO)
12 INCH FDK ASSEMBLY A / R W / PRIVACY (NCR LOGO)
FDK CLIP IN LEADERLINE RH
3
4
5
445-0708539
445-0709200
445-0709185
FDK CLIP IN LEADERLINE LH
FDK / TOUCHSCREEN BEZEL DUST SEAL
FASCIA FDK HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Display
15 INCH FDK ASSEMBLY
1
2,3
5
FASCIA FDK
FDK 1
FDK 2
*
*
*
*
1
1
1
1
2
445-0711367
445-0711375
445-0711376
445-0711377
445-0708541
15 INCH FDK ASSEMBLY A / G (NCR LOGO)
15 INCH FDK ASSEMBLY A / G W / PRIVACY (NCR LOGO)
15 INCH FDK ASSEMBLY A / R (NCR LOGO)
15 INCH FDK ASSEMBLY A / R W / PRIVACY (NCR LOGO)
FDK CLIP IN LEADERLINE RH
3
4
5
445-0708539
445-0709200
445-0709185
FDK CLIP IN LEADERLINE LH
FDK / TOUCHSCREEN BEZEL DUST SEAL
FASCIA FDK HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
12-3
6632 Parts Identification Manual
Display
12 INCH TOUCHSCREEN
TYPE A
*
*
*
12-4
1
1
2
3
445-0711370
445-0711374
445-0709200
009-0020708
TYPE MINI B
12 INCH TOUCHSCREEN A / G (NCR LOGO)
12 INCH TOUCHSCREEN A / G W / PRIVACY (NCR LOGO)
FDK / TOUCHSCREEN BEZEL DUST SEAL
USB TYPE A TO MINI B HIGH SPEED (480 MBPS) 2000MM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Display
15 INCH TOUCHSCREEN
TYPE A
*
*
*
1
1
2
3
445-0711369
445-0711378
445-0709200
009-0020708
TYPE MINI B
15 INCH TOUCHSCREEN A / G (NCR LOGO)
15 INCH TOUCHSCREEN A / G W / PRIVACY (NCR LOGO)
FDK / TOUCHSCREEN BEZEL DUST SEAL
USB TYPE A TO MINI B HIGH SPEED (480 MBPS) 2000MM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
12-5
6632 Parts Identification Manual
Display
12.1 INCH DISPLAYS
12-6
009-0020750
009-0020749
2
3
4
445-0707151
445-0707152
445-0711696
12.1 INCH COLOUR STD BRIGHTNESS XGA AUTO SCALING
24V DISPLAY
12.1 INCH COLOUR TRANSFLECTIVE SUNLIGHT READABLE
XGA AUTO SCALING 24V DISPLAY
12.1 INCH BRACKET SUPPORT ASSEMBLY (RIGHT)
12.1 INCH BRACKET SUPPORT ASSEMBLY (LEFT)
SUPPORT BRACKET SPACER
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Display
15 INCH DISPLAYS
009-0023400
009-0023354
445-0704828
15 INCH COLOUR STD BRIGHTNESS XGA AUTO SCALING 24V
DISPLAY
15 INCH COLOUR SUNLIGHT READABLE XGA AUTO SCALING
DISPLAY
12.1 INCH DISPLAY BRACKET SUPPORT ASSEMBLY (RIGHT)
445-0704829
12.1 INCH DISPLAY BRACKET SUPPORT ASSEMBLY (LEFT)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
12-7
6632 Parts Identification Manual
Display
12-8
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Envelope Depository & Dispenser
Table of Contents
Envelope Depository & Dispenser
INTRODUCTION ......................................................................................................... 19-1
DEPOSITORY MODULE (VIEW 1 OF 2) .................................................................. 19-2
DEPOSITORY MODULE (VIEW 2 OF 2) .................................................................. 19-3
DEPOSITORY CAPTURE BINS ................................................................................. 19-4
ENVELOPE DISPENSER ............................................................................................ 19-5
RETRACTION ASSEMBLY........................................................................................ 19-6
USB PPD CONTROL BOARD TOP LEVEL ASSEMBLY........................................ 19-7
USB TYPE A TO TYPE MINI B HIGH SPEED 3000MM ......................................... 19-7
POWER ADAPTOR HARNESS .................................................................................. 19-8
ENVELOPE DEPOSIT CONTROL HARNESS .......................................................... 19-9
TI DEPOSIT BIN HARNESS ....................................................................................... 19-9
ENVELOPE DISPENSER CONTROL HARNESS ................................................... 19-10
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
13-i
6632 Parts Identification Manual
Envelope Depository & Dispenser
13-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Envelope Depository & Dispenser
Table of Contents
Chapter 13
Envelope Depository & Dispenser
INTRODUCTION
This chapter covers the NCR 6632 ATMs USB Envelope Depository & Dispenser.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
13-1
6632 Parts Identification Manual
Envelope Depository & Dispenser
DEPOSITORY MODULE (VIEW 1 OF 2)
2
1
1D
1C
1A
1B
13-2
* 1
* 1A
1B
1C
* 1D
445-0681421
445-0710320
445-0699349
009-0019194
009-0019525
DEPOSITORY MODULE ASSEMBLY
. USB PPD CONTROL BOARD
. CONTROL BOARD COVER
. PRINT CARTRIDGE HOLDER
. INK JET PRINT CARTRIDGE
445-0704629
PPD INTERFACE MOULDING
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Envelope Depository & Dispenser
DEPOSITORY MODULE (VIEW 2 OF 2)
1
3
1E
1F
1K
1G
1J
1H
* 1
* 1E
* 1F
* 1G
1H
445-0681421
445-0683158
445-0685679
009-0022987
445-0704600
DEPOSITORY MODULE ASSEMBLY
. WIPER ASSEMBLY
. SOLEDOID ASSEMBLY
. DC MOTOR, GEAR REDUCER WITH SUPPRESSION
. TIMING DISK COVER
1J
1K
3
445-0704724
445-0706582
445-0683162
. HAND WHEEL
. USB CABLE BRACKET
INK PAD
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
13-3
6632 Parts Identification Manual
Envelope Depository & Dispenser
DEPOSITORY CAPTURE BINS
*
*
*
13-4
1
2
3
445-0684230
445-0704496
445-0705543
OPEN BIN ASSEMBLY
ACCESS BIN ASSEMBLY
LATCHFAST BIN ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Envelope Depository & Dispenser
ENVELOPE DISPENSER
1
2
1A
3
5
* 1
* 1A
2
3
4
445-0681767
009-0020634
445-0683198
445-0704197
445-0704514
ENVELOPE DISPENSER ASSEMBLY
. DC MOTOR, GEAR REDUCER WITH SUPPRESSION
ENVELOPE WEIGHT ASSEMBLY
GEAR COVER
ENVELOPE SPACER
5
6
009-0023319
445-0704478
CABLE CLAMP, SNAP IN
TIMING DISK SENSOR COVER
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
13-5
6632 Parts Identification Manual
Envelope Depository & Dispenser
RETRACTION ASSEMBLY
1
11
10
5
9
12
13-6
13
14
1
2
3
4
5
445-0700838
445-0683195
009-0022122
009-0023328
445-0705319
PPD CRADLE
MODULE TRAY ASSEMBLY
3 PART SLIDE, 596MM CLOSED, 820MM EXTENSION
SLIDE LATCH
INTERLOCK ACTUATOR
6
7
8
9
10
009-0006620
009-0008697
445-0705305
445-0705269
445-0705547
SPDT INTERLOCK SWITCH
PVC ANTI ROLL CAP
INTERLOCK SWITCH COVER
INTERLOCK BRACKET
LATCHFAST KEY
11
12
13
14
445-0704697
445-0705306
445-0706456
445-0708628
LATCHFAST BIN COVER
INTERLOCK REAR COVER
BIN PRESENT BRACKET ASSEMBLY
HANDLE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Envelope Depository & Dispenser
USB PPD CONTROL BOARD TOP LEVEL ASSEMBLY
445-0710320
USB PPD CONTROL BOARD TOP LEVEL ASSEMBLY
USB TYPE A TO TYPE MINI B HIGH SPEED 3000MM
TYPE A
TYPE MINI B
October 2007
009-0020712
USB TYPE A TO TYPE MINI B, HIGH SPEED, (480MBPS) 3000MM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
13-7
6632 Parts Identification Manual
Envelope Depository & Dispenser
POWER ADAPTOR HARNESS
PPD_PCB_P4
POWER_ADAPTOR
I/L NO
13-8
445-0700803
I/L CM
POWER ADAPTOR HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Envelope Depository & Dispenser
ENVELOPE DEPOSIT CONTROL HARNESS
FISH_SEN
WIPE_SOL
SOLENOID_SEN
DEP_PCB_P9
ENTRY_SENSOR
FISH_SOL
PPD_PCB_P7
TRANSPORT_LENGTH
TIM DISK
PPD_BIN_FULL_SEN
445-0682356
ENVELOPE DEPOSIT CONTROL HARNESS
TI DEPOSIT BIN HARNESS
TI REFLECTIVE SENSOR
October 2007
445-0704237
PPD_PCB_P8
TI DEPOSIT BIN HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
13-9
6632 Parts Identification Manual
Envelope Depository & Dispenser
ENVELOPE DISPENSER CONTROL HARNESS
SEN
TIM DISC
HOPPER LOW
PPD_PCB_P2
LED
13-10
445-0682355
ENVELOPE DISPENSER CONTROL HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
External Cabling
Table of Contents
External Cabling
INTRODUCTION ......................................................................................................... 12-1
REMOTE STATUS INDICATOR ASSEMBLY ......................................................... 12-2
REMOTE DEVICES HARNESS ................................................................................. 12-2
EUROPEAN CORD SET.............................................................................................. 12-3
POWER CORD SET (SJT) ........................................................................................... 12-3
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
14-i
6632 Parts Identification Manual
External Cabling
14-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
External Cabling
Table of Contents
Chapter 14
External Cabling
INTRODUCTION
This chapter covers the NCR 6632 ATMs External Cables.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
14-1
6632 Parts Identification Manual
External Cabling
REMOTE STATUS INDICATOR ASSEMBLY
445-0576170
REMOTE STATUS INDICATOR ASSEMBLY
REMOTE DEVICES HARNESS
NIGHT
DEPO 1
RIO
REMOTE
STATUS
NIGHT
DEPO 2
REMOTE
RELAY
14-2
445-0708595
REMOTE DEVICES HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
External Cabling
EUROPEAN CORD SET
*
*
1
2
009-0009085
009-0019509
EUROPEAN CORD SET
CIRCUIT BREAKER, 7.5 AMP
POWER CORD SET (SJT)
2
1
*
*
October 2007
1
2
006-0084423
006-8800616
POWER CORD SET (SJT)
CIRCUIT BREAKER, 12 AMP
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
14-3
6632 Parts Identification Manual
External Cabling
14-4
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Harnesses
Table of Contents
Harnesses
INTRODUCTION ......................................................................................................... 13-1
MAINS SWITCH HARNESS ....................................................................................... 13-2
AC INLET HARNESS .................................................................................................. 13-3
AC DISTRIBUTION POWER CORD (1000MM) ....................................................... 13-3
TWIN DC HARNESS ................................................................................................... 13-4
VX4 TOPBOX HARNESS ........................................................................................... 13-5
VX4 FASCIA HARNESS ............................................................................................. 13-6
VX4 FASCIA MEI HARNESS..................................................................................... 13-6
FDK FASCIA HARNESS ............................................................................................ 13-7
DIGITAL CAMERA HARNESS.................................................................................. 13-7
VIDEO CABLE STRAIGHT / 45 DEGREE 2200MM ............................................... 13-8
CAMERA VIDEO SYNC ADAPTOR HARNESS ..................................................... 13-8
HIGH POWER DC DISTRIBUTION HARNESSES ................................................... 13-9
HIGH POWER DC- DC HARNESS ............................................................................ 13-9
LOW POWER DC DISTRIBUTION HARNESS ...................................................... 13-10
USB TYPE A TO TYPE MINI B HIGH SPEED CABLE ........................................ 13-10
RJ11 - RJ11 CABLE ................................................................................................... 13-11
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
15-i
6632 Parts Identification Manual
Harnesses
15-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
Harnesses
Table of Contents
Chapter Number: 15
Harnesses
INTRODUCTION
This chapter covers the NCR 6632 ATMs Harness feature.
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Chapter 15-1
Harnesses
MAINS SWITCH HARNESS
GR4
GR3
GR3
L 1A
SERVICE
SWITCH
AC_DIST
N 4B
N 5B
CORE
L 2A
L 1A
N 4B
MAINS
SWITCH
N 5B
L 2A
INLET / UPS
L
(Fuse OUT)
L
(Fuse IN)
Chapter 15-2
445-0705093
MAINS SWITCH HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Harnesses
AC INLET HARNESS
MAINS FILTER
UPS / INLET
L
N
E
CHASSIS_GND
445-0705092
AC INLET HARNESS
AC DISTRIBUTION POWER CORD (1000MM)
PLUG
RECEPTACLE
009-0021977
AC DISTRIBUTION POWER CORD, 1000MM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Chapter 15-3
Harnesses
TWIN DC HARNESS
TWIN_DC
Chapter 15-4
445-0706584
TWIN DC HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Harnesses
VX4 TOPBOX HARNESS
MISC / IF 50 WAY
MEI_TRAY
MEI_FASCIA
MEI_IMCRW
FASCIA_FDK
TAMPER
POWER POWER
STAT
STAT
1
2
WATCHDOG
445-0709176
VX4 TOPBOX HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Chapter 15-5
Harnesses
VX4 FASCIA HARNESS
TASK_LIGHT
_DRIVER J1
SHUTTER I2C
L/H
SHUTTER I2C
R/H
AUX_POWER
KEYBOARD
USB TYPE MINI B
DC_HUB
MEEI_FASCIA
SHUTTER
RH
SPEAKER+
ADVERT_POWER
SPEAKERKEYBOARD
USB TYPE A
DISP_MEEI
SHUTTER
I2C R/H
TASK_J2
DEPOSIT_MEEI
SHUTTER_RH
SHUTTER I2C L/H
445-0709177
VW4 FASCIA HARNESS
VX4 FASCIA MEI HARNESS
MEEI_TRAY
COIN_MEEI
CPM_MEEI
PASSBOOK_MEEI
DISP_MEEI
Chapter 15-6
445-0709179
RECEIPT_MEEI
VW4 FASCIA HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Harnesses
FDK FASCIA HARNESS
FASCIA_FDK
FDK 1
FDK 2
445-0709185
FDK FASCIA HARNESS
DIGITAL CAMERA HARNESS
CAMERA_CN1
CAM_ADPT
445-0711282
DIGITAL CAMERA HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Chapter 15-7
Harnesses
VIDEO CABLE STRAIGHT / 45 DEGREE 2200MM
CORE_VGA
DISPLAY
009-0020046
VIDEO CABLE, STRAIGHT / 45 DEGREE, 2200MM
CAMERA VIDEO SYNC ADAPTOR HARNESS
BNC_VIDEO
CAM_ADPT
BNC_SYNC
CAMERA_DC
Chapter 15-8
445-0711283
CAMERA VIDEO SYNC ADAPTOR HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Harnesses
HIGH POWER DC DISTRIBUTION HARNESSES
*
*
009-0021602
009-0021603
HIGH POWER DC DISTRIBUTION HARNESS, 1000MM
HIGH POWER DC DISTRIBUTION HARNESS, 2000MM
HIGH POWER DC- DC HARNESS
DC
445-0707050
DC
HIGH POWER DC - DC HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Chapter 15-9
Harnesses
LOW POWER DC DISTRIBUTION HARNESS
009-0020742
LOW POWER DC DISTRIBUTION HARNESS, 2000MM
USB TYPE A TO TYPE MINI B HIGH SPEED CABLE
TYPE A
TYPE MINI B
Chapter 15-10
009-0020702
USB TYPE A TO TYPE MINI B HIGH SPEED (480MBHS, 1000MM 28 / 26
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Harnesses
RJ11 - RJ11 CABLE
* RJ Male connector at Both Ends - Straight Through Connection
*
*
009-0023178
009-0023179
RJ11 - RJ11 CABLE (4M)
RJ11 - RJ11 CABLE (5M)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Chapter 15-11
Harnesses
Chapter 15-12
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
6632 Parts Identification Manual
Keyboards
Table of Contents
Keyboards
INTRODUCTION ......................................................................................................... 16-1
ALPHA KEYBOARD ASSEMBLY ............................................................................ 16-2
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
16-i
6632 Parts Identification Manual
Keyboards
16-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Keyboards
Table of Contents
Chapter 16
Keyboards
INTRODUCTION
This chapter covers the NCR 6632 ATMs Keyboard Layout.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
16-1
6632 Parts Identification Manual
Keyboards
ALPHA KEYBOARD ASSEMBLY
1
3
2
ONE
TWO
5
ONE
16-2
TWO
*
*
*
1
1
1
2
3
009-0023508
009-0023507
009-0023506
445-0708888
445-0711328
U-QWERTY KEYBOARD (FRANCE)
U-QWERTY KEYBOARD (GERMANY)
U-QWERTY KEYBOARD (ITALY)
ALPHA KEYBOARD BACKPLATE
ALPHA KEYBOARD SUPPORT
*
*
4
5
445-0684947
445-0684946
UX EPP ESD SHORT HARNESS
UX EPP ESD LONG HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Miscellaneous Interface
Table of Contents
Miscellaneous Interface
INTRODUCTION ......................................................................................................... 14-1
UNIVERSAL MISCELLANEOUS INTERFACE BOARD TOP LEVEL ASSY ....... 14-2
RIO ENABLE HARNESS ............................................................................................ 14-2
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
17-i
6632 Parts Identification Manual
Miscellaneous Interface
17-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Miscellaneous Interface
Table of Contents
Chapter 17
Miscellaneous Interface
INTRODUCTION
This chapter covers the NCR 6632 ATMs Miscellaneous Interface Board.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
17-1
6632 Parts Identification Manual
Miscellaneous Interface
UNIVERSAL MISCELLANEOUS INTERFACE BOARD TOP LEVEL
ASSY
J3
J4
J6
J7
J8
445-0709370
UNIVERSAL MISCELLANEOUS INTERFACE BOARD TOP LEVEL
ASSEMBLY
RIO ENABLE HARNESS
RIO
17-2
445-0705095
MISC_IF P6
RIO ENABLE HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Operator Interface
Operator Interface
INTRODUCTION ......................................................................................................... 15-1
UOP ASSEMBLY WITH NCR LOGO ........................................................................ 15-2
DVI - D SINGLE LINK CABLE ASSEMBLY (3M)................................................... 15-2
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
18-i
6632 Parts Identification Manual
Operator Interface
18-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Operator Interface
Chapter 18
Operator Interface
INTRODUCTION
This chapter covers the NCR 6632 ATMs Operator Interface feature.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
18-1
6632 Parts Identification Manual
Operator Interface
UOP ASSEMBLY WITH NCR LOGO
445-0697352
UOP ASSEMBLY WITH NCR LOGO
DVI - D SINGLE LINK CABLE ASSEMBLY (3M)
DVI - D
18-2
009-0022105
DVI - D
DVI -D SINGLE LINK CABLE ASSEMBLY (3M)
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Power Supply
Table of Contents
Power Supply
INTRODUCTION ......................................................................................................... 16-1
SWITCH MODE POWER SUPPLY 600W + 24V ...................................................... 16-2
UNIVERSAL UPS POWER SUPPLY ......................................................................... 16-3
DC DISTRIBUTION ASSEMBLY .............................................................................. 16-4
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
19-i
6632 Parts Identification Manual
Power Supply
19-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Power Supply
Table of Contents
Chapter 19
Power Supply
INTRODUCTION
This chapter covers the NCR 6632 ATMs Power Supplies.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
19-1
6632 Parts Identification Manual
Power Supply
SWITCH MODE POWER SUPPLY 600W + 24V
J2
J7
J3
J4
J5
J6
19-2
009-0023971
J8
SWITCH MODE POWER SUPPLY 600W +24V
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Power Supply
UNIVERSAL UPS POWER SUPPLY
009-0022657
009-0023855
445-0706253
UNIVERSAL UPS (120V) 1500VA, RACK MOUNT WITH USB HID
INTERFACE
UNIVERSAL UPS (230V) 1150VA, RACK MOUNT WITH USB HID
INTERFACE
UPS BRACKET
009-0021027
USB TYPE A TO TYPE B, HIGH SPEED (480MBPS) 2000MM (28/24)
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
19-3
6632 Parts Identification Manual
Power Supply
DC DISTRIBUTION ASSEMBLY
J1
J2
19-4
445-0689501
DC DISTRIBUTION BOARD ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Printers
Table of Contents
Printers
INTRODUCTION ......................................................................................................... 17-1
RECEIPT PRINTER WITH AND WITHOUT CAPTURE ......................................... 17-2
THERMAL JOURNAL PRINTER ............................................................................... 17-3
HITACHI PAGE TURN PASSBOOK PRINTER ........................................................ 17-4
SERIAL P/T PTR COMMS HARNESS ....................................................................... 17-5
STATEMENT PRINTER (SCOTSCRAIG SLIM SINGLE SHEET OPEN) .............. 17-6
STATEMENT PRINTER (SCOTSCRAIG SLIM BUNCH PRESENT OPEN) ......... 17-7
3M PARALLEL IEEE 1284 COMPLIANT CABLE ASSEMBLY ............................. 17-8
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
20-i
6632 Parts Identification Manual
Printers
20-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Printers
Table of Contents
Chapter 20
Printers
INTRODUCTION
This chapter covers the NCR 6632 ATMs Printers feature.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
20-1
6632 Parts Identification Manual
Printers
RECEIPT PRINTER WITH AND WITHOUT CAPTURE
1
2
3
4
*
*
*
*
*
20-2
10
1
2
3
4
5
009-0023828
009-0023827
497-0450996
009-0023829
007-9835215
THERMAL RECEIPT PRINTER TRANSPORT WITH CAPTURE
THERMAL RECEIPT PRINTER TRANSPORT
1ST THERMAL RECEIPT PRINTER ENGINE
1ST THERMAL RECEIPT PRINTER PAPER HOPPER
FUSE 20MM 630MA
* 6
* 7
* 8
* 9
* 10
445-0704177
445-0704178
445-0706501
009-0022535
998-0879489
RECEIPT EXIT MOULDING (FRONT)
RECEIPT EXIT MOULDING (REAR)
URECEIPT USB STRAIN RELIEF BRACKET
MEI FOR UNIVERSAL PRODUCTS
RECIEPT PRINTER PAPER CORE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Printers
THERMAL JOURNAL PRINTER
*
*
October 2007
1
2
009-0023876
998-0869149
THERMAL JOURNAL PRINTER (PLASTIC FRAME)
JOURNAL PRINTER PAPER CORE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
20-3
6632 Parts Identification Manual
Printers
HITACHI PAGE TURN PASSBOOK PRINTER
1
3
2
4
12
10
11
13
14
*
*
*
20-4
1
2
3
4
5
009-0022739
445-0710714
009-0022535
445-0704729
445-0711433
HITACHI PAGE TURN PASSBOOK PRINTER
PASSBOOK PRINTER BRACKET
MEI FOR UNIVERSAL PRODUCTS
PASSBOOK PRINTER MOULDING (RHS)
PASSBOOK MOULDING SUPPORT
6
7
8
9
10
445-0704880
445-0710705
445-0705390
445-0711745
445-0711746
PASSBOOK SHUTTER
PASSBOOK SHUTTER MOUNTING BRACKET
PASSBOOK PRINTER NO SHUTTER BRACKET
IGUS TOP GUIDE BRACKET (HITACHI)
IGUS BOTTOM GUIDE BRACKET (HITACHI)
11
12
13
14
009-0019718
445-0695493
009-0020691
009-0020692
SPRING EXTENSION
PASSBOOK PRINTER ADAPTOR
HARNESS CHAIN - LINK OUTER RAD. OPENING - 10MM WIDE
HARNESS CHAIN - END BRACKET SET - 10MM WIDE
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Printers
SERIAL P/T PTR COMMS HARNESS
P/T_PASSBOOK
P/T_PASSBOOK_CORE
October 2007
445-0708570
SERIAL P/T PASSBOOK PTR COMMS HARNESS
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
20-5
6632 Parts Identification Manual
Printers
STATEMENT PRINTER (SCOTSCRAIG SLIM SINGLE SHEET
OPEN)
1
3
4
2
009-0022948
2
3
4
445-0710713
445-0711432
445-0704727
SCOTSCRAIG SLIM 8 INCH STATEMENT PRINTER OPEN
(SINGLE SHEET)
STATEMENT PRINTER BRACKET (VX4/DU3)
STATEMENT MOULDING SUPPORT (BUNCH)
STATEMENT PRINTER MOULDING
5
6
009-0022535
445-0705390
MEI FOR UNIVERSAL PRODUCTS
PASSBOOK PRINTER NO SHUTTER BRACKET
20-6
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Printers
STATEMENT PRINTER (SCOTSCRAIG SLIM BUNCH PRESENT
OPEN)
1
3
4
2
009-0022949
2
3
4
445-0710713
445-0711432
445-0707388
SCOTSCRAIG SLIM 8 INCH STATEMENT PRINTER OPEN
(BUNCH PRESENT)
STATEMENT PRINTER BRACKET (VX4/DU3)
STATEMENT MOULDING SUPPORT
STATEMENT MOULDING (BUNCHER)
009-0022535
MEI FOR UNIVERSAL PRODUCTS
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
20-7
6632 Parts Identification Manual
Printers
3M PARALLEL IEEE 1284 COMPLIANT CABLE ASSEMBLY
CONNECTOR A
20-8
009-0022087
CONNECTOR B
3M PARALLEL IEEE 1284 COMPLIANT CABLE ASSEMBLY
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Security Enclosures
Table of Contents
Security Enclosures
INTRODUCTION ......................................................................................................... 18-1
ELECTRONIC COMBINATION SAFE LOCK .......................................................... 18-2
KEYLOCK TO UL 437 STANDARD.......................................................................... 18-3
KEYLOCK S & G ......................................................................................................... 18-4
3 WHEEL COMBINATION LOCK GROUP 2M........................................................ 18-5
3 WHEEL COMBINATION LOCK GROUP 2M WITH KEYLOCK ........................ 18-6
3 WHEEL COMBINATION LOCK GROUP 2M WITH SILENT ALARM .............. 18-7
STANDARD 3 WHEEL UL GROUP 2 COMBINATION LOCK ............................. 18-8
STANDARD 3 WHEEL UL GROUP 2 COMBINATION LOCK WITH
SILENT ALARM ......................................................................................................... 18-9
CONTROLLED ACCESS SAFE LOCK .................................................................... 18-10
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
21-i
6632 Parts Identification Manual
Security Enclosures
21-ii
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Security Enclosures
Table of Contents
Chapter 21
Security Enclosures
INTRODUCTION
This chapter covers the NCR 6632 ATMs Security Enclosures.
October 2007
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
21-1
6632 Parts Identification Manual
Security Enclosures
ELECTRONIC COMBINATION SAFE LOCK
21-2
009-0018987
ELECTRONIC COMBINATION SAFE LOCK
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Security Enclosures
KEYLOCK TO UL 437 STANDARD
COVER
COMBINATION
LOCK
ESCUTCHEON
SPLINE KEY
CHANGE TOOL
October 2007
009-0008257
KEYLOCK TO UL 437 STANDARD
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
21-3
6632 Parts Identification Manual
Security Enclosures
KEYLOCK S & G
KEY LOCK
ESCUTCHEON
CHANGE TOOL
21-4
009-0021755
KEYLOCK S & G
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Security Enclosures
3 WHEEL COMBINATION LOCK GROUP 2M
October 2007
009-0022827
3 WHEEL COMBINATION LOCK GROUP 2M
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
21-5
6632 Parts Identification Manual
Security Enclosures
3 WHEEL COMBINATION LOCK GROUP 2M WITH KEYLOCK
21-6
009-0022829
3 WHEEL COMBINATION LOCK GROUP 2M WITH KEYLOCK
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Security Enclosures
3 WHEEL COMBINATION LOCK GROUP 2M WITH SILENT ALARM
October 2007
009-0022828
3 WHEEL COMBINATION LOCK GROUP 2M WITH SILENT ALARM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
21-7
6632 Parts Identification Manual
Security Enclosures
STANDARD 3 WHEEL UL GROUP 2 COMBINATION LOCK
DIAL RING
COMBINATION
LOCK
DIAL
SPLINE KEY
CHANGE TOOL
21-8
009-0008254
STANDARD 3 WHEEL UL GROUP 2 COMBINATION LOCK
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
6632 Parts Identification Manual
Security Enclosures
STANDARD 3 WHEEL UL GROUP 2 COMBINATION LOCK WITH
SILENT ALARM
COMBINATION
LOCK
DIAL RING
DIAL
SPLINE KEY
CHANGE TOOL
October 2007
009-0008255
STANDARD 3 WHEEL UL GROUP 2 COMBINATION LOCK WITH
SILENT ALARM
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
21-9
6632 Parts Identification Manual
Security Enclosures
CONTROLLED ACCESS SAFE LOCK
*
*
21-10
1
2
009-0022650
445-0668813
CONTROLLED ACCESS SAFE LOCK
TUBING
NCR CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
October 2007
To help NCR maintain the quality of their publications, send comments on the accuracy, clarity,
usability, navigation, organization, and value of this book.
Address correspondence to:
Surface mail address:
NCR Financial Solutions Group Ltd
Information Solutions
Kingsway West
Dundee
Scotland
DD2 3XX
Email address:
[email protected]
You might also like
- NCR SelfServ 84 ATM Service Manual B006 7602 B000 Jan 05,2022100% (1)NCR SelfServ 84 ATM Service Manual B006 7602 B000 Jan 05,20221,620 pages
- NCR Selfserv 84 Atm (6684) Parts Identification Manual: NCR - Confidential and ProprietaryNo ratings yetNCR Selfserv 84 Atm (6684) Parts Identification Manual: NCR - Confidential and Proprietary198 pages
- NCR Selfserv 88 Atm Service Manual: NCR - Confidential and Proprietary100% (1)NCR Selfserv 88 Atm Service Manual: NCR - Confidential and Proprietary1,376 pages
- S2 Currency Dispenser: NCR - Confidential and Proprietary100% (2)S2 Currency Dispenser: NCR - Confidential and Proprietary88 pages
- b006-6297-c000 NCR NDC+ and Aandc Emv Icc Reference Manual100% (1)b006-6297-c000 NCR NDC+ and Aandc Emv Icc Reference Manual204 pages
- S2 Media Dispenser MStat 25 Pick Sensor Fault100% (2)S2 Media Dispenser MStat 25 Pick Sensor Fault4 pages
- S2 Media Dispenser Presenter and Pick Module Gears100% (2)S2 Media Dispenser Presenter and Pick Module Gears2 pages
- Scalable Deposit Module: Thebunchmaximumoffiftyitemscanbereducedviathecustomerapplication100% (1)Scalable Deposit Module: Thebunchmaximumoffiftyitemscanbereducedviathecustomerapplication116 pages
- 445-0797328C - 6684-K497-V001 Installation InstructionsNo ratings yet445-0797328C - 6684-K497-V001 Installation Instructions12 pages
- Motorized Card Reader (With Chip, 123) On-Site Repair Manual100% (2)Motorized Card Reader (With Chip, 123) On-Site Repair Manual61 pages
- AANDC Preliminary Discontinution For AANDC v04.04.xx100% (1)AANDC Preliminary Discontinution For AANDC v04.04.xx9 pages
- 56xx/personas Self-Service Financial Terminal: Diagnostic Status Code Notebook100% (1)56xx/personas Self-Service Financial Terminal: Diagnostic Status Code Notebook270 pages
- CMD Related Service Manual (01750060162 A)100% (5)CMD Related Service Manual (01750060162 A)234 pages
- S2 Media Dispenser MStat 67 Pick 4 Media JamNo ratings yetS2 Media Dispenser MStat 67 Pick 4 Media Jam2 pages
- 3-DeS Fix NCR Install-User Manual 12-02-05No ratings yet3-DeS Fix NCR Install-User Manual 12-02-0546 pages
- GBXX Programming Training: Augsburg (24Th and 25Th October 2006)100% (1)GBXX Programming Training: Augsburg (24Th and 25Th October 2006)96 pages
- s2 Media Dispense Module Brochure - English UsNo ratings yets2 Media Dispense Module Brochure - English Us7 pages
- Selected Topics in Computer Science Ch2No ratings yetSelected Topics in Computer Science Ch243 pages
- A Seminar Report ON Direct-To-Home Television (DTH)100% (1)A Seminar Report ON Direct-To-Home Television (DTH)32 pages
- Auditing and Investigations R.K 05-05-2006 DR Maungu100% (2)Auditing and Investigations R.K 05-05-2006 DR Maungu347 pages
- Computer Profile Summary: Plan For Your Next Computer Refresh... Click For Belarc's System Management Products0% (1)Computer Profile Summary: Plan For Your Next Computer Refresh... Click For Belarc's System Management Products6 pages
- How To Use Office 365 Salesforce and Box With Splunk Enterprise and Splunk Enterprise SecurityNo ratings yetHow To Use Office 365 Salesforce and Box With Splunk Enterprise and Splunk Enterprise Security42 pages
- The Peru Reader History Culture Politics 2nd Edition Orin Starn Download100% (2)The Peru Reader History Culture Politics 2nd Edition Orin Starn Download39 pages
- CISSP Study Guide Conrad 2024 Scribd Download100% (3)CISSP Study Guide Conrad 2024 Scribd Download65 pages
- The Definitive PS2 Trimming Guide - BitBuilt - Giving Life To Old ConsolesNo ratings yetThe Definitive PS2 Trimming Guide - BitBuilt - Giving Life To Old Consoles13 pages
- Buying Guides Best Tablets For Photo EditingNo ratings yetBuying Guides Best Tablets For Photo Editing15 pages
- Digital Learning Resources and Support Features MatrixNo ratings yetDigital Learning Resources and Support Features Matrix9 pages
- 4.2 A Tri-Band Dual-Concurrent Wi-Fi 802.11be Transceiver Achieving - 46dB TX RX EVM Floor at 7.1GHz For A 4K-QAM 320MHz SignalNo ratings yet4.2 A Tri-Band Dual-Concurrent Wi-Fi 802.11be Transceiver Achieving - 46dB TX RX EVM Floor at 7.1GHz For A 4K-QAM 320MHz Signal3 pages
- Sentinel Web Services Installation GuideNo ratings yetSentinel Web Services Installation Guide33 pages
- How To Add A Username To A V7 BIRT Report PDFNo ratings yetHow To Add A Username To A V7 BIRT Report PDF5 pages
- Bread, Milk Bread, Diapers, Beer, Eggs Bread, Diapers, Beer, Cola Bread, Milk, Diapers, Beer Bread, Milk, Diapers, ColaNo ratings yetBread, Milk Bread, Diapers, Beer, Eggs Bread, Diapers, Beer, Cola Bread, Milk, Diapers, Beer Bread, Milk, Diapers, Cola4 pages
- Chapter 13: Multiplexing and Multiple-Access TechniquesNo ratings yetChapter 13: Multiplexing and Multiple-Access Techniques6 pages
