Scribd
Upload
116 views5 pages

Risk Assessment Hazard Checklist: Abrasive Wheels (Grinders)

This document provides a risk assessment hazard checklist for tasks carried out onboard vessels. It lists over 70 potential hazards organized under categories such as abrasive wheels, welding, electrical equipment, pressurized systems, bunkering, food preparation, and more. For each hazard, it identifies potential risks in brief phrases. The list is intended to help identify hazards associated with various tasks, and notes that additional hazards should be added.

Uploaded by

singhajitb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
116 views5 pages

Risk Assessment Hazard Checklist: Abrasive Wheels (Grinders)

This document provides a risk assessment hazard checklist for tasks carried out onboard vessels. It lists over 70 potential hazards organized under categories such as abrasive wheels, welding, electrical equipment, pressurized systems, bunkering, food preparation, and more. For each hazard, it identifies potential risks in brief phrases. The list is intended to help identify hazards associated with various tasks, and notes that additional hazards should be added.

Uploaded by

singhajitb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Risk Assessment Hazard Checklist

Below is a list of the particular hazards associated with the work carried out onboard
our vessels. The list is a guide only, and represents the minimum hazards associated
with a particular item. You should go through the list and identify any hazards that
relate to the task you are doing. This list is not exhaustive and you should add any you
feel are relevant.

Abrasive wheels (Grinders)

Welding

Access To First Aid

Electrical Equipment

Boarding Arrangements

Lack of training
Inappropriate wheel fitted
Damaged wheel
Securing bolts over tightened
Using the side of the wheel
Holding the work piece with cloth / pliers
Fire
Disc disintegrating
No guards fitted
Build up of dirt / grease
Flying sparks / debris
Lighting
Lack of PPE
Fire / explosion
Lack of training
Lack of PPE
Metal Fumes and welding gases
Trailing Cables
Ultraviolet and infrared radiation
Electrical current
Hot metal
Noise
First Aid boxes not accessible or maintained
Insufficient First aid facilities available
Insufficient first aid equipment
Insufficient first aiders
Arcing
Electrocution
Power being switched on prematurely
Lack of training
Trailing Cables
Faulty volt testing equipment
Working on live equipment
Fire
Water ingress
Damaged gangway
To steep a angle

Pressurised Systems

Bunkering

Food Preparation & Handling

Greasing

High Pressure Washing

Damaged or inappropriate safety netting


Slips, trips and falls
Damaged rope
Lighting
Signage
Movement of vessel alongside
Falling between vessel and ship
Exposure to uncontrolled release
Lack of isolation
Lack of training
Lack of information
Lack of barriers
Incorrect use
Poor installation
Operator error
Poor equipment
Lack of PPE
Fire
Debris from exploding pipes, valves etc
Pollution
Fire
Slip Hazards
Inadequate communications
Spillages / Overflows
Lack of smoking controls
Lack of personal hygiene
Inadequate hand cleaning facilities
Cuts, amputations
Cross contamination
Insufficient cooking temperature
Bacterial Infections
Inadequate defrosting
Insufficient storage temperature
Sharp knives / broken glass left in washing up sink
Chemicals
Slips, trips and falls
Chemical
Slips, trips and falls
Moving machinery
Working at height
Using wrong type of grease
Lack of training
Lack of equipment information
Defective equipment
Cuts, bruises
Lack of PPE
Slippery surfaces
Slips, trips and falls

Lifting Plant (Crane)

Lighting

Painting / Scraping / Needle


Guns

Portable Ladders

PPE

Insufficient SWL (Safe Working Load)


Poorly maintained
Lack of training
Non qualified operators
Poor communications
Defective / Inadequate slings, strops, shackles etc
Wind conditions
Sharp corners on load
Moving loads over crewmen
Approaching the lift prior to landing and weight is of
the wire
Poor visibility
Inadequate
Loose / Damaged wiring
Non- Intrinsically safe
Emergency lighting
Damaged/ defective
Glare, dazzle
Wrong voltage
Chemicals (Paint, Thinners, Rust remover)
Enclosed spaces (Asphyxiation, Light Headiness)
Inadequate ventilation
Working at height
Slips, Trips and falls
Defective tools
Incorrect tools
Cuts, bruises
Lack of training
Electricity
Compressed Air
Lack of PPE
Incorrect PPE
Lack of smoking controls
Moving machinery
Vibration Injury
Noise
Inadequate Pitch angle
Base / ladder inadequately secured
Not using both hands whilst climbing
Carrying tools when climbing
Placing planks between two sets of ladders
Working at height
No safety harness
Dropped tools
Incorrect type
Poorly maintained
Damaged
Wrong size

Refrigeration Machinery

Ropes

Signage

Stages

Tugger Winches

Unmanned Machinery Spaces

Chemicals (Refrigerant)
Cold
Locked in
Ventilation
Lighting
Inlets / Outlets blocked
Leaks
Electricity
Lack of PPE
Lack of training
Deterioration, undue wear or damage
Wrong type
Rope burns
Slips, trips and falls
Inadequate SWL
Frictional heat
Line of fire
Inadequate splices
Lack of PPE
Wrong type
Damaged
Obstructed
Insufficient
Unreadable
Defective Planking
Defective lizards, blocks and gantlines
Gantlines insufficient to reach the water
Lack of training
Unqualified crewmen
Falling into water / from height
Lack of PPE
Insufficient anchoring points
Wire parting
Moving machinery
Lighting
Inadequate communication
Sharp corners
Lack of PPE
Defective equipment
Lack of maintenance
Riding turns
Entering space alone and without informing OOW
Machinery suddenly starting up without warning
Lighting
Slips, trips and falls
Noise

Washing Down

Noise
Drainage

Working on machinery

Chemicals, Contact with skin, eyes, ingestion


Slips, trips and falls
Working at height
Weather
Lack of training
Damage to eardrums (Both long/ Short-term)
Bad communications
Slips, Trips and falls
Damage to equipment
Rusting
Damaged duck boards
Blocked scuppers / Freeing ports
Machinery starting when being worked on
Lack of isolation
Burst Pipes
Lack of correct PPE
Electrocution
Faulty or nonexistent guards
Moving Parts
Oil / grease

You might also like