Scribd Logo
Upload

Welcome to Scribd!

  • 94 views

    DCX 8510-4 DCX4S Insert

    Uploaded by

    Ham Za
    The document provides instructions for installing shipping brackets on the DCX 8510-4 or DCX-4S chassis. The brackets are required for shipping the chassis preinstalled in a cabinet. The instructions include removing fan bay screws, installing left and right side plates using supplied screws, installing the chassis in the cabinet, adding clip nuts or nut retainers, securing L-brackets to the cabinet rails, and attaching the L-brackets to the side plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DCX 8510-4 DCX4S Insert

    Uploaded by

    Ham Za
    94 views1 page
    The document provides instructions for installing shipping brackets on the DCX 8510-4 or DCX-4S chassis. The brackets are required for shipping the chassis preinstalled in a cabinet. The instructions include removing fan bay screws, installing left and right side plates using supplied screws, installing the chassis in the cabinet, adding clip nuts or nut retainers, securing L-brackets to the cabinet rails, and attaching the L-brackets to the side plates.

    Original Description:

    DCX S Insert

    Original Title

    DCX_8510-4_DCX4S_Insert

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for installing shipping brackets on the DCX 8510-4 or DCX-4S chassis. The brackets are required for shipping the chassis preinstalled in a cabinet. The instructions include removing fan bay screws, installing left and right side plates using supplied screws, installing the chassis in the cabinet, adding clip nuts or nut retainers, securing L-brackets to the cabinet rails, and attaching the L-brackets to the side plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    94 views1 page

    DCX 8510-4 DCX4S Insert

    Uploaded by

    Ham Za
    The document provides instructions for installing shipping brackets on the DCX 8510-4 or DCX-4S chassis. The brackets are required for shipping the chassis preinstalled in a cabinet. The instructions include removing fan bay screws, installing left and right side plates using supplied screws, installing the chassis in the cabinet, adding clip nuts or nut retainers, securing L-brackets to the cabinet rails, and attaching the L-brackets to the side plates.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    53-1001285-02

    *53-1001285-02*
    29 April 2011

    Installing the DCX 8510-4 or DCX-4S Shipping Brackets


    Use the following instructions to install the DCX 8510-4 or DCX-4S shipping brackets. These brackets are required when the DCX
    8510-4 or DCX-4S is installed with the intent to ship preinstalled in a cabinet.

    1.
    2.

    Figure 1-0: Shipping brackets stand alone (left side only)


    Prior to installing the chassis into the cabinet, remove the 10 flat head 6-32 fan bay attach screws located on both the left
    and right side chassis panels. (see Figure 1-1)
    Install both side plates using the 10 pan head 6-32 screws supplied with the kit, making sure to note that the left and right
    side plates are different. The left side and right side plates are part marked with A and B respectively. (see Figure 1-1)
    NOTE: The side plates have 5 sets of discrete holes, part marked 27 through 31. Use the holes that correspond with the
    cabinets rail to rail depth (see Table: 1-1). Torque the screws to 10 in-lb.

    Column ID
    Rail to Rail
    depth (inches)
    3.
    4.

    5.

    6.

    27
    27-27.5

    Table: 1-1
    28
    29
    27.5-28.5
    28.5-29.5

    30
    29.5-30.5

    31
    30.5-31

    Install the chassis to the cabinet based on the instructions outlined in the Port Side Exhaust Kit Installation Procedure
    document number 53-1001181-XX.
    Install the clip nuts or nut retainers. NOTE: The clip nuts are used with cabinets that utilized square holes, and nut retainers
    are used with cabinets that utilize round holes. The locations of the clip nuts or nut retainers match the location for the port
    side rack brackets outlined in 53-1001181-XX.
    Secure the L-brackets to the cabinet rails using the 6 10-32 pan head screws with square cone washers supplied with the
    kit, making sure to notice the left and right side brackets are different. The left side and right side L-brackets are part
    marked with A and B respectively. (see Figure 1-2) Torque the screws to 32 in-lb.
    Once the L-brackets are mounted to the rails they can be secured to the side plates using the 18 10-32 pan head screws with
    square cone washers supplied with the kit. (see Figure 1-2) Torque the screws to 32 in-lb.

    Figure 1-1

    Figure 1-2

    Shipping Bracket Install Guide Insert


    BROCADE

    You might also like