Esmat Anti-Noise and Corrosion Pipe Straps - Issue 2008

DATASHEETS
COATED U-BOLTS
ESLIN
NYLON COATED
RILSAN COATED
ABCITE COATED
U-BOLTS
FOR
ANTI-NOISE
AND
ANTI-CORROSION
APPLICATION
SPECIAL:
ESLIN COVERED U-BOLTS FOR GRE/GRP

PIPING TO PREVENT CRUSHING THE PIPE
DURING INSTALLATION
Issue 2008
Esmat Engineering bv
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
ESLIN RUBBER LINED U-BOLT +100 oC

EME-30 & EME-31
Prevents paint failure and corrosion
problems. A lined u-bolt eliminates corrosion problems
between steel u-bolt and pipe and thus saves your piping
systems and extends lifetime. Also noise and vibration
reduction capabilities.
Justification of initial expense of these lined u-bolts

lies with the life cycle cost; having to repair or replace
piping after a few years is very expensive.
Fields of application. For galvanised and SS pipes.

Types. Grip type EME-30 and Guide (with Teflon surface)
type EME-31
Materials
Steel type: Stock items are S235JRG2 for M10 to M20
Finish: Hot dip galvanised (M6 is self coloured SS316)
Lining materials: Eslin for -30 up to +100 oC.
Also available in materials suitable for -80 up to +300 oC
Eslin lining material is seamless vulcanised to steel u-bolt
EPDM backing pad 10 mm thickness
DN
U-bolt
C
width
15
60
35
M6
30
65
20
65
40
M6
30
70
25
65
47
M6
30
77
32
70
60
M10
30
100
40
75
66
M10
30
106
50
80
78
M10
30
118
87
94
M12
30
134
105
101
M12
30
141
80
100
108
M12
30
148
4 100
115
134
M12
30
174
5 125
145
164
M16
40
214
6 150
155
192
M16
40
242
8 200
180
243
M16
40
293
10 250
212
303
M20
50
353
12 300
260
356
M20
50
406
NPS
inch
Mounting: grip as per above situation. For guide one nut above
base plate and one nut below base plate.
Pad
GRIP & GUIDE

Part numbers
EME-30-21
EME-31-21
EME-30-27
EME-31-27
EME-30-34
EME-31-34
EME-30-43
EME-31-43
EME-30-49
EME-31-49
EME-30-61
EME-31-61
EME-30-73
EME-31-73
EME-30-76
EME-31-76
EME-30-89
EME-31-89
EME-30-115
EME-31-115
EME-30-141
EME-31-141
EME-30-168
EME-31-168
EME-30-219
EME-31-219
EME-30-273
EME-31-273
EME-30-324
EME-31-324
issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
SILICON RUBBER LINED U-BOLT +175 oC

EME-30 & EME-31


Types. Grip type EME-30-S175 and Guide (with Teflon
surface) type EME-31-S175
Materials
Lining materials: Silicon for -30 up to +175 oC.
Silicon lining material is seamless vulcanised to steel u-bolt
Silicon backing pad 10 mm thickness
U-bolt
C
width
NPS
inch
DN
Pad
15
60
35
M6
30
65
20
65
40
M6
30
70
25
65
47
M6
30
77
32
70
60
M10
30
100
40
75
66
M10
30
106
50
80
78
M10
30
118
87
94
M12
30
134
105
101
M12
30
141
80
100
108
M12
30
148
100
115
134
M12
30
174
125
145
164
M16
40
214
150
155
192
M16
40
242
200
180
243
M16
40
293
10
250
212
303
M20
50
353
12
300
260
356
M20
50
406
GRIP & GUIDE

Part numbers
EME-30-21-S175
EME-31-21-S175
EME-30-27-S175
EME-31-27-S175
EME-30-34-S175
EME-31-34-S175
EME-30-43-S175
EME-31-43-S175
EME-30-49-S175
EME-31-49-S175
EME-30-61-S175
EME-31-61-S175
EME-30-73-S175
EME-31-73-S175
EME-30-76-S175
EME-31-76-S175
EME-30-89-S175
EME-31-89-S175
EME-30-115-S175
EME-31-115-S175
EME-30-141-S175
EME-31-141-S175
EME-30-168-S175
EME-31-168-S175
EME-30-219-S175
EME-31-219-S175
EME-30-273-S175
EME-31-273-S175
EME-30-324-S175
EME-31-324-S175
issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
SILICON RUBBER LINED U-BOLT +300 oC

EME-30-S300


Type. Grip type EME-30-S300
Materials
Lining materials: Silicon for -30 up to +300 oC.
Silicon lining material is seamless vulcanised to steel u-bolt
Silicon backing pad 10 mm thickness
NPS
inch
1
1
1
2
2
2
3
4
5
6
8
10
12
DN
15
20
25
32
40
50
*
*
80
100
125
150
200
250
300
A
60
65
65
70
75
80
87
105
100
115
145
155
180
212
260
U-bolt
C
35
40
47
60
66
78
94
101
108
134
164
192
243
303
356
Pad
G
M6
M6
M6
M10
M10
M10
M12
M12
M12
M12
M16
M16
M16
M20
M20
width
30
30
30
30
30
30
30
30
30
30
40
40
40
50
50
L
65
70
77
100
106
118
134
141
148
174
214
242
293
353
406
GRIP & GUIDE

Part numbers
EME-30-21-S300
EME-30-27-S300
EME-30-34-S300
EME-30-43-S300
EME-30-49-S300
EME-30-61-S300
EME-30-73-S300
EME-30-76-S300
EME-30-89-S300
EME-30-115-S300
EME-30-141-S300
EME-30-168-S300
EME-30-219-S300
EME-30-273-S300
EME-30-324-S300
issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
-./* 01 22 0 ./* % 1 324 .)

5
6 3 7 6 3
+
+
9
,
, 8
+
,
, 3 +
,
+&
(
,
+
9
,
&
+
+ & 898+
&
9
&
:
9 #
, 3
+
+ 8
(
"
(<
6 3
"
.
7 5
+ 9
>
+
+ +
%6
3* 8; +
6 3
- 8;
,
+
+
+
+ +
+
8;
,
(
,<
) &+
& 8
=0< & 6
6
, 6?
+& 8 +
, -- ?
& 3
5(
+
+ & 3
5
+
+8
,
+ 3 +
8;
#& ' ( # ' )
"
6?
6?
6?
!!
6
6
6
6
6 ?
?
6
+
!
*
6 ?
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
,,./
./
0+
0+
01
01
**
**
/2
/2
13
13
,+1
,+1
,/3
,/3
.,3
.,3
" #
%
)
("
+ (
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
$
& '
(
(
(

EME-50 & EME-51


type EME-51
Materials
DN
U-bolt
C
width
15
60
37
M6
30
65
20
65
43
M6
30
70
25
65
50
M6
30
77
32
70
69
M10
30
110
40
75
75
M10
30
116
50
80
87
M10
30
128
80
100
115
M12
30
158
4 100
115
141
M12
30
184
6 150
155
210
M16
40
260
8 200
180
262
M16
40
315
NPS
inch
Pad
GRIP & GUIDE

Part numbers
EME-50-21
EME-51-21
EME-50-27
EME-51-27
EME-50-34
EME-51-34
EME-50-43
EME-51-43
EME-50-49
EME-51-49
EME-50-61
EME-51-61
EME-50-89
EME-51-89
EME-50-115
EME-51-115
EME-50-168
EME-51-168
EME-50-219
EME-51-219
issue 2008
Koperweg 17
8251 KA Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
-./* 01 22 0 ./* % 1 324 .)

5
6 37 8 6 37
+
+
:
,
, 9
+
,
, 3 +
,
+&
(
,
+
:
,
&
+
&
+ & 9:9+
&
:
;
: #
, 3
+
+ 9
(
"
(=
6 37
"
.
,5
+ :
?
+
+ +
%6
3* 9< +
6 37
- 9<
,
+
+
+
+ +
+
9<
,
,=
) &+
& 9
>0= & 6
6
, 67
+& 9 +
, -- 7
& 3
5(
+
+ & 3
5
+
+9
,
+ 3 +
9<
"% & ' " &( )

!
"
67
67
67
!!
6
6
6
7
6
+
!
*
6 7
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
*+
*,
,*
,*
-.
-.
/+
/+
/0
/0
11
11
.2
.2
03
03
,+0
,,+0
,.3
,.3
-,3
-,3
" #
%
)
("
+ (
6 7
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
$
& '
(
(
(

EME-70 & EME-71
Prevents cracking of GRE/GRP pipes. A lined
u-bolt prevents cracking during installation of the u-bolt due
to flexible rubber backing. Also noise and vibration reduction
capabilities.
lies with the life cycle cost; having to repair or replace piping
after a few years is very expensive.
Fields of application.
For WAVIN GRE/GRP.

type EME-71
Materials
PN
bar
NPS
NPS
I/D
O/D
U-bolt
Pad
width
32
25
30.2
65
47
M6
30
75
32
40
45.2
70
69
M10
30
110
32
50
55.2
80
83
M10
30
123
32
80
86.4 100
108
M12
30
148
25
100
106.4 115
134
M12
30
174
25
150
156.4 155
192
M16
40
242
GRIP & GUIDE

Part numbers
EME-70-030
EME-71-030
EME-70-045
EME-71-045
EME-70-055
EME-71-055
EME-70-086
EME-71-086
EME-70-106
EME-71-106
EME-70-156
EME-71-156
Mounting: grip as per above situation. For guide one nut

above base plate and one nut below base plate.
issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
NYLON COATED U-BOLT +90 oC

EME-NC-LT
problems. A rubber coated u-bolt eliminates
corrosion problems between steel u-bolt and pipe and
thus saves your piping systems and extends lifetime.
Justification of initial expense of these rubber

coated u-bolts lies with the life cycle cost; having to
repair or replace piping after a few years is very
expensive.
Fields of application. For galvanised and SS

pipes in offshore and onshore piping, shipbuilding,
chemical
and
petrochemical
industries,
gas
distribution systems, LPG and LNG plants
Materials & specifications

Coating: special UV-resistant nylon
Standard coating thickness: about 300 micron
Suitable up to +90 oC
Steel: standard S235; other qualities upon request.
Finish: hot dip galvanised threading.
Part Number
NPS
'A'
EME-NC-LT-027
EME-NC-LT-034
EME-NCLT-021
EME-NC-LT-049
EME-NC-LT-061
EME-NC-LT-089
EME-NC-LT-115
EME-NC-LT-168
EME-NC-LT-219
EME-NC-LT-273
EME-NC-LT-324
EME-NC-LT-356
EME-NC-LT-406
EME-NC-LT-457
EME-NC-LT-508
EME-NC-LT-610
M8
M8
M8
M10
2 M10
3 M12
'B'
22
C
30
'T
27
35
65
37
45
65
50
60
65
62
72
65
75
65
91
103
4 M12
6 M16
118
130
75
162
188
95
8 M16
10 M20
222
238
95
275
295
110
330
350
110
361
381
110
412
432
110
461
485
125
513
537
125
614
638
125
12 M20
14 M20
16 M20
18 M24
20 M24
24 M24
other dimensions or other steel materials upon

request
Issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
NYLON COATED U-BOLT +90 oC

EME-NC-HD

expensive.

chemical
and
petrochemical
industries,
gas

Coating: special UV-resistant nylon
Standard coating thickness: about 300 micron
Part Number
NPS
'A'
'B' C
59
1 M10 49
2 M12 62
74
3 M12 91 103
4 M16 117 133
'T
75
EME-NC-HD-273
6 M16 174 190

8 M20 225 245
10 M20 278 298
EME-NC-HD-324
12 M24 330 354
100
EME-NC-HD-049
EME-NC-HD-061
EME-NC-HD-089
EME-NC-HD-115
EME-NC-HD-168
EME-NC-HD-219
50
55
60
75
90
90
Larger sizes, other dimensions or other steel

materials upon request
Issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
RUBBER COATED U-BOLT

EME-RC
Main Advantages
A rubber coated u-bolt prevents corrosion between
the normally uncoated u-bolt and pipe.
Fields of Application
Offshore and onshore piping
Shipbuilding
Chemical and petrochemical industries
Gas distribution systems
LPG and LNG plants
Material
Coating is rubber in hardness 70 Shore A, suitable up
to 100 oC
Standard steel is S235; other qualities upon request.
Finish threading is hot dip galvanised.
Grip & Guide

Mounting makes grip or guide application possible.
Due to rubber coating we prefer grip application.
Please see nylon coated (EME-NC) or lined u-bolts
(EME-31) for a guide application.
Part Number
EME-RC-021
EME-RC-027
NPS 'A'
22
27
'B'
87
C
60
89
60
93
60
EME-RC-034
EME-RC-043
43 105
EME-RC-049
49 110
EME-RC-061
60 122
EME-RC-076
75 145
EME-RC-089
90 159
EME-RC-102
EME-RC-115
EME-RC-141
EME-RC-168
EME-RC-219
34
3 102 171
4 115 183
5 141 210
6 168 255
8 220 307
10 274 369
'D'
M6
M6
M6
60 M10
63 M10
63 M10
76 M12
76 M12
76 M12
76 M12
76 M12
95 M16
95 M16
102 M20
12
EME-RC-324
324 429 108 M20
EME-RC-273
Dimension of base plate (F x G) can be modified to

customers requirement
Issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
RUBBER COATED U-BOLT +80 oC

EME-RC

expensive.

chemical
and
petrochemical
industries,
gas

Coating: rubber in hardness 70 Shore A
Standard rubber coating thickness: 250 micron
Part Number
EME-RC-021
EME-RC-027
NPS 'A'
M6
M6
C
30
22
34
27
'D'
70
T
60
70
60
M6
34
42
70
60
1 M10
1 M10
43
54
73
60
49
60
76
63
2 M10
3 M12
60
76
4 M12
6 M16
115
72 82
103 102
128 114
220
EME-RC-273
8 M16
10 M20
EME-RC-324
12 M20
324
EME-RC-034
EME-RC-043
EME-RC-049
EME-RC-061
EME-RC-089
Grip & Guide
EME-RC-115
Mounting makes grip or guide application possible.

In case of noise and vibration reduction or layer
thickness above 1 mm, we suggest lined u-bolt series
EME-30 and EME-31.
EME-RC-168
EME-RC-219
'B'
90
168
274
63
76
188 155
238 181
95
296 212
348 245
102
95
108

Issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
RUBBER COATED U-BOLT

EME-RC-UNC
-UNC
Main Advantages
A rubber coated u-bolt prevents corrosion and
pitting between the uncoated u-bolt and pipe.
Fields of Application
Offshore and onshore piping
Shipbuilding
Chemical and petrochemical industries
Gas distribution systems
LPG and LNG plants
Material
Coating: rubber in hardness 70 Shore A, U-bolt
material: carbon steel; other qualities upon
request.
Finish threading is hot dip galvanised.
Temperature and extra

Suitable up to 100 oC
Part Number
EME-RC-UNC-021
EME-RC-UNC-027
EME-RC-UNC-034
EME-RC-UNC-043
EME-RC-UNC-049
EME-RC-UNC-061
EME-RC-UNC-073
EME-RC-UNC-089
EME-RC-UNC-102
EME-RC-UNC-115
EME-RC-UNC-141
EME-RC-UNC-168
EME-RC-UNC-219
EME-RC-UNC-273
EME-RC-UNC-324
pipe
size
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
rod size 'A'

1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
7/8
'B'
15/16
1 1/8
1 3/8
1 11/16
2
2 7/16
2 15/16
3 9/16
4 1/16
4 9/16
5 5/8
6 3/4
8 3/4
10 7/8
12 7/8
'C'
1 3/26
1 3/8
1 5/8
2 1/16
2 3/8
2 13/16
3 7/16
4 1/16
4 9/16
5 1/16
6 1/8
7 3/8
9 3/8
11 5/8
13 3/4
'D'
2 3/4
2 3/4
2 3/4
2 7/8
3
3 1/4
3 3/4
4
4 1/4
4 1/2
5
6 1/8
7 1/8
8 3/8
9 5/8
'T'
kg/100
2 1/8
5,0
2 1/8
5,4
2 1/8
5,4
2 1/8 12,7
2 1/2 13,6
2 1/2 15,0
3 38,6
3 42,2
3 45,9
3 49,9
3 56,3
3 3/4 90,8
3 3/4 104,4
4 220,6
4 1/4 358,7
Issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
INSULATED U-STRAP (+100 oC)

EME-A & EME-A-PT
Prevents
corrosion
problems
and
cracking of GRE/GRP pipes. The clamp Lining
eliminates corrosion problems due to electro-lytic action
between dissimilar metals of pipe and pipe clamp. Due to
larger contact surface with the pipe than u-bolts, the ustrap is better suitable for higher loads. The clamp lining
prevents cracking of the GRE/GRP pipe during installation,
also see EME-AG and EME-AG-PT datasheets for u-straps
supplied with wear saddle type EME-WP
Fields of application:
Offshore and onshore

piping, shipbuilding, chemical & petrochemical industries,
gas distribution systems, LPG and LNG plants, FPSO.
Material: Eslin clamp lining; carbon steel or stainless

steel u-strap. Standard temperature range
-30 up to +100 oC.
Grip & Guide. Standard grip version, but also
available with optional PTFE surface on clamp lining to
provide a guide function.
Pipes
Standard EME-A & EME-PT is suitable for CS & SS pipes
GRIP
Part
Number
EME-A-1
EME-A-1
EME-A-2
EME-A-2
NPS
'A
62
80
92
2 107
EME-A-3
3 124
EME-A-4
4 148
EME-A-5
5 175
EME-A-6
6 206
EME-A-8
8 258
EME-A-10
10 322
EME-A-12
12 374
EME-A-14
14 406
EME-A-16
16 460
EME-A-18
18 516
EME-A-20
20 566
EME-A-24
24 668
'D'
F'
M10
50
50 M10
50 M10
50 M12
50 M12
50 M12
50 M12
50 M16
50 M16
65 M20
65 M20
65 M20
75 M20
75 M24
75 M24
75 M24
GUIDE
'G'
Part Number
70 EME-A-PT-1
75 EME-A- PT-1
80 EME-A- PT-2
100 EME-A- PT-2
100 EME-A- PT-3
120 EME-A- PT-4
130 EME-A-PT-5
155 EME-A- PT-6
180 EME-A- PT-8
210 EME-A- PT-10
245 EME-A- PT-12
260 EME-A- PT-14
285 EME-A- PT-16
320 EME-A- PT-18
345 EME-A- PT-20
400 EME-A- PT-24
Other sizes or thicknesses upon request

Issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net
INSULATED U-STRAP for GRE/GRP

EME-AGR & EME-AGR-PT (+100 0C)
Prevents cracking of GRE/GRP pipes.
Due to larger contact surface with the pipe than ubolts, the u-strap is better suitable for higher loads.
The clamp lining prevents cracking of the GRE/GRP
pipe during installation and it is supplied with a
GRE/GRP wear pad (see separate datasheet EME-WP)
Fields of application: Offshore and onshore

piping, shipbuilding, chemical and petrochemical
industries, gas distribution systems, LPG and LNG
plants, FPSO.
Material:
Eslin clamp lining; carbon steel or

stainless steel u-strap. Standard temperature range
-30 up to +100 oC.
Grip & Guide. Standard grip version (EME-AGR),

but also available with optional PTFE surface on clamp
lining to provide a guide function (EME-AGR-PT).
Pipes
2 24 FIBERBOND 20FR-EC
2- 12 FIBERBOND 20JF-C
Other sizes or thicknesses upon request
Issue 2008
Koperweg 17
8251 KA, Dronten
The Netherlands
Phone: +31 (0)321 33 88 45

Fax: +31 (0)321 38 04 91
[email protected]
www.esmat.net

Esmat Anti-Noise and Corrosion Pipe Straps - Issue 2008

Uploaded by

Copyright:

Available Formats

Esmat Anti-Noise and Corrosion Pipe Straps - Issue 2008

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Esmat Anti-Noise and Corrosion Pipe Straps - Issue 2008

Uploaded by

Copyright:

Available Formats

DATASHEETS

ESLIN COVERED U-BOLTS FOR GRE/GRP

Phone: +31 (0)321 33 88 45

ESLIN RUBBER LINED U-BOLT +100 oC

Justification of initial expense of these lined u-bolts

Fields of application. For galvanised and SS pipes.

GRIP & GUIDE

Phone: +31 (0)321 33 88 45

SILICON RUBBER LINED U-BOLT +175 oC

Justification of initial expense of these lined u-bolts

Fields of application. For galvanised and SS pipes.

GRIP & GUIDE

Phone: +31 (0)321 33 88 45

SILICON RUBBER LINED U-BOLT +300 oC

Justification of initial expense of these lined u-bolts

Fields of application. For galvanised and SS pipes.

GRIP & GUIDE

Phone: +31 (0)321 33 88 45

-./* 01 22 0 ./* % 1 324 .)

ESLIN RUBBER LINED U-BOLT +100 oC

Justification of initial expense of these lined u-bolts

Fields of application. For galvanised and SS pipes.

GRIP & GUIDE

Phone: +31 (0)321 33 88 45

-./* 01 22 0 ./* % 1 324 .)

"% & ' " &( )

ESLIN RUBBER LINED U-BOLT +100 oC

Types. Grip type EME-70 and Guide (with Teflon surface)

GRIP & GUIDE

Mounting: grip as per above situation. For guide one nut

Phone: +31 (0)321 33 88 45

NYLON COATED U-BOLT +90 oC

Justification of initial expense of these rubber

Fields of application. For galvanised and SS

Materials & specifications

other dimensions or other steel materials upon

Phone: +31 (0)321 33 88 45

NYLON COATED U-BOLT +90 oC

Justification of initial expense of these rubber

Fields of application. For galvanised and SS

Materials & specifications

6 M16 174 190

12 M24 330 354

Larger sizes, other dimensions or other steel

Phone: +31 (0)321 33 88 45

RUBBER COATED U-BOLT

Grip & Guide

Dimension of base plate (F x G) can be modified to

Phone: +31 (0)321 33 88 45

RUBBER COATED U-BOLT +80 oC

Justification of initial expense of these rubber

Fields of application. For galvanised and SS

Materials & specifications

Grip & Guide

Mounting makes grip or guide application possible.

Larger sizes, other dimensions or other steel

Phone: +31 (0)321 33 88 45

RUBBER COATED U-BOLT