Scribd
Upload
3K views1 page

DP15&DP16 Error Codes

This document contains a list of error codes, descriptions, and suggested repairs for an electric bicycle system. The errors are categorized into different systems including the display system, controller system, automatic gear transmission (AGT) system, motor system, battery system, wheel speed sensor system, remote control systems, communication systems, light systems, and cable systems. Each error provides a code, description of the issue, the detection method, and recommendations for repairing the root cause of the error.

Uploaded by

pavlik1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views1 page

DP15&DP16 Error Codes

This document contains a list of error codes, descriptions, and suggested repairs for an electric bicycle system. The errors are categorized into different systems including the display system, controller system, automatic gear transmission (AGT) system, motor system, battery system, wheel speed sensor system, remote control systems, communication systems, light systems, and cable systems. Each error provides a code, description of the issue, the detection method, and recommendations for repairing the root cause of the error.

Uploaded by

pavlik1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TranzX Logix line Error code list

V1.5
Error code
Description
Display system
E00
Voltage detection error of the Display (5V)
E0000
Voltage detection error of the Display (5V_SW)
E0001
Voltage detection error of the Display (5V_SW2)
E0002
LCD backlighting error
E0003
Voltage detection error of the Display (5V)
E0004
Voltage detection error of the Display (5V_SW)
E0005
Voltage detection error of the Display (5V_SW2)
E0006
Display EEPROM read/write error
E0007
Display LCD driver IC defect
E0008
Light Sensor defect
E0009
Controller system
E01
Voltage detection error of the Controller (5V)
E0100
Voltage detection error of the Controller (5V_SW)
E0101
Voltage detection error of the Controller (12V)
E0102
Light voltage output error of the Controller (6V)
E0103
Motor control circuit defect
E0104
Voltage detection error of the Controller (5V)
E0105
Voltage detection error of the Controller (5V_SW)
E0106
Voltage detection error of the Controller (12V)
E0107
Light voltage output error of the Controller (6V)
E0108
Slope sensor detection error
E0109
Motor blocked
E0110
AGT system
E02
Voltage detection error of the AGT (5V_SW1)
E0200
Voltage detection error of the AGT (5V_2)
E0201
Voltage detection error of the AGT (15V_1)
E0202
Voltage detection error of the AGT (5V_RE)
E0203
Voltage detection error of the AGT (5V_SW1)
E0204
Voltage detection error of the AGT (5V_2)
E0205
Voltage detection error of the AGT (15V_1)
E0206
Voltage detection error of the AGT (5V_RE)
E0207
E0208
Home point detection error
E0209
AGT motor driver defect
Gear position mismatch
E0210
Motor system
E03
Crank dead point sensor defect
E0300
Crank direction sensor defect
E0301
Crank RPM sensor defect
E0302
Coaster brake sensor defect
E0303
Crank dead point sensor defect
E0304
Crank RPM sensor defect
E0305
Coaster brake sensor defect
E0306
Motor temperature sensor defect
E0307
Motor Hall sensor defect
E0308
Torque sensor defect
E0309
Torque sensor out of range
E0310
Torque sensor reverse
E0311
Software & Motor SPEC not match
E0312
Battery system
E04
Voltage detection error of the Battery (36V)
E0400
Voltage detection error of the Battery (36V)
E0401
Battery I2C Communication error
E0402
E0403
Battery voltage out of range
Wheel speed sensor system
E05
Wheel speed sensor error
E0500
Wheel speed sensor error
E0501
Display
remote control button system
E06
E0600
"+" button defect
E0601
"-" button defect
E0602
"S" button defect
E0603
"Power" button defect
AGT remote control button system
E07
"AT/MT" button defect
E0700
"Upshift" button defect
E0701
"Downshift" button defect
E0702
I2C communication error
E0703
Communication system
E08
Display MCU <> Power MCU communication error
E0800
Display MCU <> Motor MCU communication error
E0801
Display MCU <> AGT MCU communication error
E0802
E0803
E0804
E0805
E09
E0900
E0901
E10
E1000
E1001
E1002
E1003

Display MCU <> Torque MCU communication error

Detection method

Repair

Logix test

Check Display
E-bike system

Logix test

Logix test

Check Controller
1.Check motorcable, 2. Check Controller, 3. Check Motor
Check Controller

E-bike system
Check AGT unit
1.Check motorcable, 2. Check Controller, 3. Check Motor

Logix test

Check AGT unit


E-bike system

Logix test

1.Adjust shifting wire, 2. Check AGT unit


1. Check crank assemble position, 2. Check motorcable connection, 3. Check Motor

Logix test

1. Check motorcable connection, 2. Check Motor


1. Check displaycable connection, 2. Check Motor
1. Check motorcable connection, 2. Check Motor

E-bike system

Logix test

1. Check displaycable connection, 2. Check Motor


1. Check motorcable connection, 2. Check Motor
1. Check displaycable connection, 2. Check Motor
1. Check the tighten torque value of the 9 screws on the motor, 2. Check Motor
1. Check the torque value. It should increase when pressing the right pedal, 2. Check Motor
1. Check the software SPEC, 2. Check if the Motor SPEC is correct(Coaster/Free wheel)

Logix test
E-bike system

1. Check Controller, 2. Check Battery

Logix test
E-bike system

1.Check magnet position, 2. Check displaycable connection, 3. Check speed sensor

Logix test

1.Check connection between remote control and Display, 2.Check remote control,
3.Check display

Logix test

1.Check connection between AGT remote control with Display,


2.Check AGT remote control, 3.Check display

E-bike system
1. Check displaycable connection, 2. Check Controller,

E-bike system

Display MCU <> All MCU communication error


Firmware compatible problem

1. Check displaycable connection with AGT unit, 2. Check AGT unit


1. Disconnect USB cable before switch on bike, 2. Check displaycable connection,
3. Check Motor
1. Check displaycable connection, 2. Check motorcable connection,
3. Check Display, 4. Check Controller
1. Check Firmware SPEC between display, controller, sensor and motor

Light system
Front light system error
Rear light system error
Cable system
Voltage detection error of the Battery (36V) from Display
Voltage detection error of the Battery (36V) from AGT
Voltage detection error of the Battery (36V) from Display
Voltage detection error of the Battery (36V) from AGT

Logix test

Logix test
E-bike system

1. Check front light, 2. Check light cable


1. Check rear light, 2. Check light cable
1. Check displaycable connection, 2. Check Display
1. Check displaycable connection with AGT unit, 2. Check AGT unit
1. Check displaycable, 2. Check Display
1. Check displaycable connection with AGT unit, 2. Check AGT unit

*Bold font as an important error message

You might also like