Scribd
Upload
250 views

Generator

Factsheet olympian generator

Uploaded by

Jfr Andzis
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
250 views

Generator

Factsheet olympian generator

Uploaded by

Jfr Andzis
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

GEP9.

5-2
Diesel Generator Set
Exclusively from your Caterpillar dealer

EU Stage II Emissions Compliant

Output Ratings
Generating Set Model
380-415V,50Hz

220/127V, 60 Hz

Prime*

Standby*

8.5 kVA

9.5 kVA

6.8 kW

7.6 kW

10.0 kVA

11.0 kVA

8.0 kW

8.8 kW

* Refer to ratings definitions on page 4.


Ratings at 0.8 power factor.

Technical Data
Engine Make & Model:

Perkins 403D-11G

Alternator Model:

LL1014H

Base Frame Type:

Heavy Duty Fabricated Steel

Circuit Breaker Type:

3 Pole MCB

Frequency:

50 Hz

60 Hz

Engine Speed: RPM

1500

1800

Fuel Tank Capacity: litres (US gal)

45 (11.9)

Fuel Consumption, Prime: l/hr (US gal/hr)

2.5 (0.7)

2.9 (0.8)

Fuel Consumption, Standby : l/hr (US gal/hr)

2.8 (0.7)

3.2 (0.8)

Engine Techncial Data


Physical Data

Lubrication system
Perkins

Manufacturer:

Oil Filter Type:

Spin-On, Full Flow

Model:

403D-11G

Total Oil Capacity l (US gal):

No. of Cylinders/Alignment:

3 / In Line

Oil Pan l (US gal):

4 Stroke

Cycle:
Induction:

Naturally Aspirated

Cooling Method:

4.9 (1.3)
4.4 (1.2)

Oil Type:

API CH4 15W-40

Cooling Method:

N/A

Water

Governing Type:

Mechanical

Governing Class:

ISO 8528 G1
23:1

Compression Ratio:
Displacement: l (cu.in)

1.1 (69.0)

Bore/Stroke: mm (in)

77.0 (3.0)/81.0 (3.2)

Moment of Inertia: kg m (lb. in)

1.63 (5570)

50 Hz

60 Hz

1500

1800

9.5 (13.0)

11.8 (16.0)

8.6 (12.0)

10.7 (14.0)

-Standby:

672.0 (97.4)

695.0 (100.8)

-Prime:
Regenerative Power: kW

610.0 (88.5)

630.0 (91.4)

3.5

3.9

Performance
Engine Speed: RPM
Gross Engine Power: kW (hp)
-Standby:
-Prime:
BMEP: kPa (psi)

Engine Electrical System:


-Voltage/Ground:

12/Negative

-Battery Charger Amps:

40

Weight: kg (lb) - Dry:

129 (284)

- Wet:

139 (306)

Fuel System
Fuel Filter Type:

Air System

50 Hz

60 Hz

Air Filter Type:

Replaceable Element

Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr)
110%
Load

100%
Load

75%
Load

50%
Load

50 Hz

2.8 (0.7)

2.5 (0.7)

1.9 (0.5)

1.5 (0.4)

60 Hz

3.2 (0.8)

2.9 (0.8)

2.2 (0.6)

1.8 (0.5)

50 Hz

2.8 (0.7)

2.1 (0.6)

1.6 (0.4)

60 Hz

3.2 (0.8)

2.4 (0.6)

1.8 (0.5)

50 Hz

60 Hz

Combustion Air Flow:


m/min (cfm)

-Standby:

0.7 (25)

0.9 (32)

-Prime:

0.7 (25)

0.9 (32)

Max. Combustion Air Intake


Restriction: kPa (in H2O)

6.4 (25.7)

6.4 (25.7)

24.0 (848)

32.7 (1155)

Radiator Cooling Air Flow:


m/min (cfm)
External Restriction to
Cooling Air Flow: Pa (in H2O)

Cooling System

125 (0.5)

125 (0.5)

50 Hz

60 Hz

5.2 (1.4)

5.2 (1.4)

Cooling System Capacity:


l (US gal)
Water Pump Type:

Replaceable Element

Recommended Fuel:

Prime

Standby

Exhaust System

Level 1

Silencer Type:
Centrifugal

Silencer Noise Reduction


Max. Allowable Back

263-0765 (1)

Pressure: kPa (in. Hg)

Heat Rejected to Water &

10.2 (3.0)

10.2 (3.0)

-Standby:

1.8 (64)

2.4 (85)

-Prime:

1.7 (59)

2.2 (78)

-Standby:

420 (788)

515 (959)

-Prime:

368 (694)

437 (819)

Exhaust Gas Flow:

Lube Oil: kW (Btu/min)


-Standby:
-Prime:
Heat Radiation to Room:
kW (Btu/min)
-Standby:
-Prime:
Radiator Fan Load: kW (hp)

9.5 (540)

12.0 (682)

8.3 (472)

10.0 (569)

2.5 (142)

3.1 (176)

m/min (cfm)

Exhaust Gas Temperature: C (F)


1.7 (97)

2.6 (148)

0.2 (0.3)

0.4 (0.5)

m/min (cfm)

Cooling system designed to operate in ambient conditions up to 50C


(122F). Contact your local Olympian dealer for power ratings at specific
site conditions.

Consult your Olympian representative for more information

Alternator Performance Data


50 Hz
Data Item

60 Hz

415/240V

400/230V

380/220V

25

24

22

24

Xd

1.210

1.310

1.450

1.520

X'd

0.090

0.100

0.110

0.110

X''d

0.045

0.048

0.054

0.056

Motor Starting
Capability* kVA

Short Circuit
Capacity %

220/127V

Reactances:
Per Unit

Reactances shown are applicable to standby ratings.


* Based on 30% voltage dip.

Alternator Technical Data


Physical Data
Manufacturer:
Model:

Operating Data
OLYMPIAN
LL1014H

Overspeed: RPM

2250

Voltage Regulation (steady state) (%):

+/- 0.5

No. of Bearings:

Wave Form NEMA = TIF:

Insulation Class:

Wave Form IEC = THF:

2.0%

Total Harmonic Content LL/LN:

4.0%

Winding Pitch - Code:


Wires:
Ingress Protection Rating:
Excitation System:
AVR Model:

2/3 - 6
12
IP23
SHUNT
R250

Radio Interference:

50

Supression is in line with European


Standard EN61000-6

Radiant Heat: kW (Btu/min)


-50 Hz:

1.4 (80)

-60 Hz:

1.4 (80)

Consult your Olympian representative for more information

1800

Technical Data

3 Phase Ratings and Performance at 50 Hz, 1500 RPM

Voltage

3 Phase Ratings and Performance at 60 Hz, 1800 RPM

Standby

Prime

Voltage

kVA

kW

kVA

kW

415/240V

8.5

6.8

9.5

7.6

400/230V

8.5

6.8

9.5

7.6

380/220V

8.5

6.8

9.5

7.6

220/127V

Prime

Standby

kVA

kW

kVA

kW

10.0

8.0

11.0

8.8

Weights & Dimensions


Weights: kg (lb)

Dimensions: mm (in)

Net (+ lube oil)

329 (725)

Length

1320 (52.0)

Wet (+ lube oil & coolant)

334 (736)

Width

552 (21.7)

Fuel, lube oil & coolant

372 (820)

Height

1179 (46.4)

Note: General configuration not to be used


for installation. See general dimension
drawings for detail.

Definitions

General Data

Standby Rating

Documents

These ratings are applicable for supplying continuous electrical


power (at variable load) in the event of a utility power failure. No
overload is permitted on these ratings. The alternator on this model
is peak continuous rated (as defined in ISO 8528-3).

A full set of operation and maintenance manuals and circuit wiring


diagrams.

Prime Rating

BS4999, BS5000, BSEN60034, BSEN61000, IEC60034.

These ratings are applicable for supplying continuous electrical


power (at variable load) in lieu of commercially purchased power.
There is no limitation to the annual hours of operation and this
model can supply 10% overload power for 1 hour in 12 hours.

Quality Standards

Warranty
All equipment carries full manufacturer's warranty.

Standard Reference Conditions


Note: Standard reference conditions 25C (77F) air inlet temp,
100m (328ft) A.S.L. 30% relative humidity. Fuel consumption data
at full load with diesel fuel with specific gravity of 0.85 and
conforming to BS2869: 1998, Class A2.

Market: International

Information contained in this publication may be considered confidential.


Discretion is recommended when distributing.
Materials and specifications are subject to change without notice.
CAT, CATERPILLAR, their respective logos and ''Caterpillar Yellow'', as well as corporate and product
identity used herein, are trademarks of Caterpillar and may not be used without permission.

www.CAT-ElectricPower.com
2009 Caterpillar
All rights reserved.
Printed in U.S.A.

You might also like