Micrex-Sx SPB Leh984c

Integrated Controllers
Series
Programmable Logic Controller
LEH984c
Compact size
Online program edit function
Ideal for reducing control panel space.
20-points basic unit

16-points expansion unit
External Dimensions (mm)

Width
Height
Depth
80
90
81
110
90
81
140
90
81
180
90
81
64
90
81
90
110
81
180
90
81
Two programming languages

With one type of hardware, SPB is applicable to two programming languages:
SX mode: MICREX-SX (language compliant with IEC)
N mode: FLEX-PC N (language of ladder and instruction words)
Large-capacity memory
Type
20points basic unit
30points basic unit
40points basic unit
60points basic unit
*1
4Ksteps
International standards conformity

All SPB models conform to the UL/cUL standards as well as the CE
mark standard.
Two analog timers

Two analog timers are built in for convenient fine-tuning and
testing.
Communication & Networking

Communication adapters are available for RS-232C, RS-485,
and simplified personal computer link connections.
POD direct connection
Programming with rich memory

Memory capacity
Porogram memory
SX mode * 1 N mode
4Ksteps
2Ksteps
Allows program modification without interrupting machine operation.
The SPB can be connected to the POD via the loader port. No
special communication unit is required.
Data memory
N mode
SX mode
5Kwords
9Kwords
8.5Kwords
8Ksteps
There are Included the initiated value of the retain memory.
High-speed processing
Ideal for small-size machines requiring fast processing.
Fast 0.44 sec. per Sequence instruction and 2.19 sec(N
mode). and 1.50 sec(SX mode). for Data instructions.
Diversified functions for expanding applications

Internal high-speed counter function
Interrupting function
Pulse train output function
Pulse catch function
Constant scan setting
Pulse width modulation function
Adapted to analog control

Many types of instructions
Many types of instructions allow ease of programming.
The program size can be reduced by effectively using a combination of instruction words.
SX mode: 202 types, N mode: 211 types.
Multi-range (voltage / current) adapted. 3 types of analog unit

with detachable terminal blocks are added to the lineup.
Capable of analog control, such as temperature control by
PID instruction.
Self-lifting terminal block & Finger protection

Use of the self-lifting terminal block - the terminals automatically pop up when unscrewed, reducing the wiring works and
preventing less of screws. The finger protection structure ensures safety.
Features ................................................................. 3
SPB Lineups .......................................................... 4
System Configurations ......................................... 6
Specifications ........................................................ 9
External Connection Diagrams .......................... 14
Control Functions ............................................... 15
Programming Languages ................................... 16
Online Adapters .................................................. 20
Dimensions .......................................................... 21
Ordering Informations ........................................ 22
3
SPB Lineups
Basic Unit
20-points Basic Unit: NW0P20 -
Power voltage: 100-200V AC, 24V DC

Input: 12 points, Output: 8 points
Relay output, Transistor output
Stand alone unit no expansion

Connectable up to five expansion units
20
120
100
120
100
80
80
60
40
20
80
60
40
40
20
20
(mm)
100
60
120
100
80
60
40
20
(mm)

Calendar function (year, month, day, hour, minute, second,
day of week) (different type)

Calendar function (year, month, day, hour, minute, second,
day of week) (different type)
40
60
180
30
120
160
140
120
120
100
80
60
40
20
120
100
100
80
80
60
60
40
40
20
20
(mm)
180
160
140
120
100
80
60
40
20
(mm)
Expansion Unit
Digital I/O Unit
Analog Unit
16-points I/O Expansion Unit: NW0E16 -3
Analog Input Unit: NW0AX04-MR

Multi-range input: 4ch
Analog Output Unit: NW0AY04-MR
16-points Input Expansion Unit: NW0E16X

Input: 16 points
Multi-range output: 4ch
Analog I/O Unit: NW0AW03-MR
16-points Output Expansion Unit: NW0E16 -0

32-points I/O Expansion Unit: NW0E32 -3

Multi-range input: 2ch

Multi-range output: 1ch
Thermocouple Input Module: NW0AX04-TC

Input: 4ch
Resistance Bulb Input Module: NW0AX04-PT
60-points I/O Expansion Unit: NW0E60R-31
Input: 4ch
Power voltage: 100-200V AC

Input: 32 points, Relay output: 28 points
Communication Adapter
RS-232C Adapter: NW0LA-RS2
General-purpose communication mode: RS-232C
1ch
Option
RS-485 Adapter: NW0LA-RS4
General-purpose communication mode: RS-485
Simplified CPU link mode
1ch
Memory Card: NW8PMF-8

Flash ROM for 40/60-points basic unit
System Configurations
Expansion Digital I/O System

Basic Unit + Digital I/O Unit
I/O Points
For the SPB, the number of I/O points can be increased up to 360
by adding digital I/O units to the basic unit. Up to five digital I/O
units can be added.
Max. digital I/O points
NW0P20 -3
20 points
20 points
NW0P30 -3
30 points
330 points
NW0P40 -3
40 points
340 points
NW0P60 -3
60 points
360 points
System with 60-point digital I/O units

A maximum of five 60-point digital I/O units, or 300 digital I/O points can be added.
360
points (60 +60 +60 +60 +60 +60)
Basic unit
Maximum five units (system with 60-point digital I/O units)
System with a combination of 16- 32- and 60-point digital I/O units
Basic unit
Basic unit
60 points digital I/O unit

Maximum three units (up to 64 I/O points)
Maximum five units (system including 60-point digital I/O unit)
* The basic unit and 60-point digital I/O unit require a power supply. The 16-/32-point digital I/O units are supplied the power from the
basic unit and 60-point digital I/O unit as indicated with an arrow ( ). One basic unit or one 60-point digital I/O unit can supply power
to a maximum of three expansion units (64 or fewer I/O points).
System with a combination of 16- and 32-point digital I/O units

The system with no 60-point digital I/O units allows addition of a maximum of three units, or 64 digital I/O points.
Basic unit
Expansion Analog System

System expanded only with analog units
For the SPB, up to three analog units can be added to the basic unit.
By doing so, the number of analog I/O points can be increased up to 12.
Analog
unit
Analog
unit
Analog
unit
Basic unit
Maximum 3 units (12 analog I/O points )
System expanded with a combination of digital I/O unit and analog unit
System without 60-point digital I/O units
Also when the basic unit is used in combination with 16-/32-point digital I/O units and/or analog units, a maximum of three units can be
added.
32-points
expansion
Analog
unit
32-points
expansion
Basic unit
Maximum 3 units (64 or less digital I/O points + analog unit)
System with 60-point digital I/O units

When the basic unit is used in combination with 60-point digital I/O units and/or analog units, a maximum of five units can be added (up to
three analog units).
Analog
unit
32-points
expansion
Analog
unit
60-points
expansion
Analog
unit
Basic unit
Maximum 3 units (64 or less digital I/O points

+ analog unit)
Maximum 3 units (64 or less digital I/O points + analog unit)

Maximum 5 units
Points for system expansion

To each of the basic unit and 60-point digital I/O unit, a maximum of three units can be added (64 or fewer I/O points + analog unit). Note that
the maximum number of expansion units is 5.
Connect this unit at a position where power can be supplied from the
60-point digital I/O unit.
16-points
expansion
16-points
expansion
16-points
expansion
Analog
unit
60-points
expansion
Basic unit
Up to three expansion units (64 or less digital I/O points + analog unit)
Basic unit and maximum number of expansion units
Max. number of connectable expansion units Connection of
The 20-point basic unit does not allow connecting expansion

units.
The maximum number of expansion units varies depend
ing on the basic unit and digital I/O unit versions.
Note that some basic unit versions do not allow connect
ing analog units. See the table given on the right for details.
Digital I/O unit
Digital I/O unit
analog unit
Older than version 10 Version 10 or later

Versions Older than version 10.07
of basic 10.07 to 20.10
unit
Version 20.11 or later
2 units
2 units
Impossible
2 units
3 units
Possible
2 units
5 units
Possible
Communication Systems
System based on RS-232C Adapter: NW0LA-RS2
RS-232C Adapter
Personal computer
Printer
Barcode reader
Other devices for
RS-232C
Item
Specification
Electrical specifications
RS-232C
Communication specifications Half-duplex transmission
Basic unit
Connection form
1:1
Transmission rate
38.4kbps max.
Transmission distance
15m max.
User interface
Nonsequenced transmission/
command set type
transmission
System based on RS-485 Adapter: NW0LA-RS4

1) RS-485 mode
RS-485 Adapter
Personal computer
Barcode reader
Other devices for
RS-485
Item
Specification
RS-485
Communication specifications Half-duplex transmission
Basic unit
Connection form
1:31 (max.)
Transmission rate
38.4kbps max.
1km max.
User interface
Nonsequenced transmission/
command set type
transmission
2) Simplified CPU link mode

RS-485 Adapter
Item
Specification
RS-485
Communication specifications NP link micro
Basic unit
Basic unit
Basic unit
Connection form
Bus
Transmission rate
125kbps max.
500m max.
Number of units connected
16 units max.
Data amount
32 words/station max.
* When connecting with the NB series, the transmission rate is limited

to 19.2 kbps and the data amount to 8 words/station.
POD Connections
1) Loader port connection
The programmable operation display (POD) can directly be connected to the loader port.
UG30 series
Dedicated cable
Type: UG200C-N0
Basic unit
2) General-purpose communication connection

Connection through the RS-232C/RS-485 adapter is possible.
UG30 series
Program Loader
Basic unit
Personal
computer
Communication adapter
8
Handy Loader
Specifications
Basic Unit / Expansion Unit Specifications

General Specifications
Item
Physical
Operating ambient
environment temperature
Storage (transport)
temperature
Relative humidity
Pollution level
Corrosive gas
Altitude/Atm.
Mechanical Vibration
operating
resistance
condition
Impact resistance
Electrical
operating
condition
Electrostatic discharge
resistance
Radiation resistance
Noise immunity
Grounding method
Structure
Installation method
Cooling method
Performance Specifications (SX mode)
Specification
0 to +55 C
Item
Calculation control
25 to +70 C
I/O control method
20 to 95% RH no condensation
Level 2 (IEC61131-2)
Free from corrosive gases, not stained with organic solvents
2000m or less above sea level
(Transport condition : 70kPa or more)
Half amplitude 0.15mm, Constant acceleration
19.6m/s2, 2 hours in each direction, 6 hours in total
Peak acceleration 147m/s2 (IEC conformance), 3 times
in each direction
6 kV: contact discharge, 8 kV: aerial discharge
(class 3)
10V/m (80 to 1,000MHz)
Noise simulator method, rising 1ns, Pulse width 1s, 1.5kV
Type D grounding (ground resistance 100)
Panel-mounted type IP30
Installation direction: Vertical
Fixing method: Direct installation (M4 screws) or
installation with JIS/IEC (35mm wide) support rail
Ambient air-cooled
Program language
(Based on IEC 61131-3)
Program capacity
No. of instructions
Instruction
processing
speed
(dimensions in s)
No. of tasks
No. of POUs
Data types *1
Basic unit
Data memory capacity
I/O memory (IQ) <Fixed>
System memory (SM) <Fixed>
Standard memory (M) <Variable>
Performance Specifications (N mode)

Item
Calculation control
I/O control method
Program language
Program capacity
No. of
Sequence instruction
instructions Applied instruction
Instruction processing speed
I/O relay
X,Y
Internal relay
M
Expanded internal relay M
Latch relay
L
Expanded latch relay
L
Special relay
M
Timer
(10 ms base) T
(1 ms base) T
Counter (increment)
C
Register Data register D
Special register D
File register R
Pointer
For branching P
For interrupt
I
Input filter time
High-speed counter
Pulse output
Self-diagnostic function
Memory backup
Calendar
Specification
Stored program repeated calculation method
Batch refresh method/Direct method
Ladder, mnemonic
Basic unit 20/30 points : 4K steps (flash memory built in)
Basic unit 40/60 points : 8K steps (flash memory built in)
45 types
166 types
Basic instruction 0.44s or more
Applied instruction 2.19s or more
1024 points
1024 points
3072 points
1024 points
3072 points
512 points
384 points (T000 to T17F)
128 points (T180 to T1FF)
256 points
8192 words
256 points
Uses the program area depending upon the setting
256 points
10 points
Variable (No filter, 3ms/3ms (default), 10ms/10ms)
Single-phase, 100kHz, 2points (unsigned 16-bit)
or Two-phase, 50kHz, 1point (signed 32-bit)
1 to 100kHz, 2points (transistor output type basic unit only)
Memory check, watchdog timer, etc.
Program (including file registers), parameters
Built-in RAM + capacitor and built-in flash (20/30-points unit)
Built-in RAM + battery and built-in flash (40/60-points unit)
Data memory (power failure retaining area)
Built-in RAM + capacitor (20/30-points unit)
Built-in RAM + battery (40/60-points unit)
Backup time of the memory
Built-in RAM + capacitor backup time: About 2 weeks (at 25C)
Built-in RAM + battery backup time: About 5 years (at 25C)
Number of updates of built-in flash: About 100,000 times
Accuracy 27 seconds/month (at 25C)
(Calendar function adapted type only)
Retain memory (RM) <Variable>

User FB memory (FM) <Variable>
System FB memory (SFM) <Variable>
Timer <Variable>
Counter <Variable>
Edge detection <Variable>
Others <Variable>
FM characteristic
initiated value <Variable>
Temporary memory capacity
Input filter time
High-speed counter
Pulse output
Self-diagnostic function
Memory backup
Calendar
Specification
Stored program, Cyclic scanning system (default
task), periodic task, event task
Whole: Scanning and batch refresh method
Digital I/O: Synchronous refresh with task method
IL, ST, LD, FBD, SFC
4K steps
2K steps
202 types
Sequence instructions: Contact: 0.44~, Coil: 0.50~
Addition and subtraction instructions: 2.56~
Multiplications and division instructions: 3.88~
Timer instructions: 18.44~
Counter instructions: 13.88~
Default task: 1
Periodic task, event task: total 4
Program: 8
User FB: 16
User FCT: 16
BOOL, WORD, DWORD, INT, DINT, UINT,
UDINT, TIME, DT, Array data types (The array
number are possible to the variable setting),
Structured data types.
60-points basic unit 40-points basic unit 30-points basic unit 20-points basic unit
8.5K words
5K words
512 words (The direct connected digital I/O are
possible to synchronous refresh with task)
512 words
2.5K words
1.5K words
(High-speed memory: 512 words fixed) (High-speed memory: 512 words fixed)
1K words
512 words
0K words (Max. 1.5K words) 0K words (Max. 1.5K words)
4K words
2K words
256 points
128 points
128 points
64 points
512 points
256 points
512 words
256 words
0K words
0K words
(Max. 192+1.5K words)
(Max. 384+3K words)
1K words (Average: 42 words/POU)
Variable (No filter, 3ms/3ms, 10ms/10ms)
Default (3ms/3ms)
Single-phase, 100kHz, 2points (unsigned 16-bit)
or Two-phase, 50kHz, 1point (signed 32-bit)
1 to 100kHz, 2points (transistor output type basic unit only)
Memory check, watchdog timer, etc.
Program (including file registers), parameters
Built-in RAM + capacitor and built-in flash (20/30-points unit)
Built-in RAM + battery and built-in flash (40/60-points unit)
Data memory (power failure retaining area)
Built-in RAM + capacitor (20/30-points unit)
Built-in RAM + battery (40/60-points unit)
Backup time of the memory
Built-in RAM + capacitor backup time: About 2 weeks (at 25C)
Built-in RAM + battery backup time: About 5 years (at 25C)
Number of updates of built-in flash: About 100,000 times
Accuracy 27 seconds/month (at 25C)
(Calendar function adapted type only)
*1 Data types: REAL type, DATE type, TOD type, STRING type are unsupported.
Specifications
Basic Unit / Expansion Unit Specifications
Input Specifications
Input circuit characteristics Input signal
Item
Rated voltage
Voltage tolerance difference
(min. to max.)
Allowable ripple ratio
Input method
Rated current
Input impedance
Standard ON voltage range
operating range OFF voltage range
Input type
Input delay Hardware
time
Software
Isolation method
Dielectric strength
Insulation resistance
Specification
Fast DC Input
Normal DC Input
24V DC
24V DC
24V DC 10%
24V DC 10%
(including ripple)
(including ripple)
5%
5%
Both sink and source (bi-directional) Both sink and source (bi-directional)
Approx. 5mA (at 24V) Approx. 5mA (at 24V)
Approx. 4.7k
Approx. 4.7k
15 to 26.4V
15 to 26.4V
0 to 5V
0 to 5V
Conforms to Type 1
Conforms to Type 1
400s
25 s or less
Can be set to No filter, 3ms/3ms, or 10ms/10ms by parameter
(Default is 3 ms/3 ms)
Photocoupler isolation
1500V AC for 1 min. (between entire input terminals and FG)
10M or more with a 500 V DC megger (between entire input terminals and FG)
Note: Terminal Nos. 0 to 3 of the basic unit are for high-speed DC input; other terminal
numbers are generally for DC input.
10
Relay Output
Specification
240V AC, 110V DC
264V AC, 140V DC
Relay
240 V AC/30 V DC: 2 A/point, 8 A/common
110 V DC: 0.2 A/point, 1.6 A/common
Output delay time
10ms or less
Min. load voltage/current 5V DC, 1mA
Max. switching frequency 1800 times/hour
Built-in fuse
None
Output type
Relay
Surge suppress circuit None
Other output protection None
Isolation method
Relay insulation
Dielectric strength
2300V AC for 1 min. (between entire output terminals and FG)
10M or more with a 500 V DC megger (between entire output terminals and FG)
Output
power
condition
Item
Output protection
method
Output circuit
characteristic
Rated voltage
Max. allowable voltage
Output method
Rated current
Transistor output (sink output, source output)

Item
Specification
Output power
condition
Specification
AC Power Type
DC Power Type
Rated voltage
100 to 240V AC
24V DC
Voltage tolerance 85 to 264V AC
19 to 30V DC
Rated frequency
50/60Hz
Frequency tolerance range 47 to 63Hz
Allowable instantaneous
1 cycle or less
5 ms or less
Waveform distortion rate 5% or less
Waveform ripple ratio

3-phase full-wave rectified waveform: 5% or less
Rated output voltage
24V DC10% (21.6 to 26.4V DC)
(Output voltage variation)
24V DC externally Basic unit 20 points: 200mA
supplied current
Basic unit 30/40 points: 250mA
Basic unit 60 points: 300mA
Expansion unit 60 points: 300mA
Power consumption Basic unit 20 points: 35VA or less
Basic unit 20 points: 10W or less
Basic unit 30/40 points: 60VA or less Basic unit 30/40 points: 25W or less
Basic unit 60 points: 75VA or less
Basic unit 60 points: 3W or less
Expansion unit 60 points: 75VA or less
Leak current
0.25mA or less
0.25mA or less
Rush current
40 Ao-p or less, 10ms or less
150 Ao-p or less, 10ms or less
Dielectric strength 2830 Vrms AC for 1 min. entire 510 Vrms AC for 1 min. entire
external terminals and ground external terminals and ground
Isolation method
Transducer isolation
Insulation resistance 10M or more with a 500 V DC megger
24V DC
5 to 24V DC
19 to 30V DC (including ripple)
4.5 to 26.4V DC
0.5A/1 point
0.8A/4 points common
1.6A/8 points common
0.1A/1 point
1.5V or less (0.5A)
1.5V or less (0.1A)
1ms or less
5s or less
0.1mA or less
2A max. (10ms)
1800 times/hour (inductive load)
None
Zener diode
None
Terminal board M3 fastened by screws
Photocoupler isolation
1500V AC for 1 min. (between entire output terminals and FG)
10M or more with a 500V DC megger
(between entire output terminals and FG)
Output circuit characteristics
Item
Output Specifications
Rated voltage Normal output

High-speed output * 1
Voltage tolerance Normal output
difference
Rated current Normal output
Output voltage Normal output
drop
Output delay Normal output
time* 2
Leakage current at off
Surge current resistance
Max. switching frequency
Built-in fuse
Surge suppress circuit
Other output protection
External connection
Isolation method
Dielectric strength
Output
protection
method
Power Source Specifications
* 1 Bits 0 and 1 are enabled for high-speed output.

* 2 ON time/OFF time changes when output frequency is high. For details, refer to Pulse
Commands/Function Commands (FEH406) User's Manual.
Analog Unit Specifications
Digital value *1
Max. resolution
Overall accuracy
(full scale)
Sampling time
Input filtering time
Input delay time *2
External connection
Connection
Applicable wire size
Isolation method
Dielectric strength
External current
consumption (24V DC)
Rush current
Treatment of unused channel
Number of occupied words
Mass
Specification
NW0AX04-MR
4 channels
1M
250
Voltage input: 15 V
Current input: 30mA
0 to 5V
10 to 10V
20 to 20mA 0 to 20mA
1 to 5V
4 to 20mA
0 to 10V
0 to 16000 (DEC)
Voltage: 1.25mV
Current: 5A
0.1% or less (23C5C)
0.3% or less (0 to 55C), 1-5V range 0.4% or less (0 to 55C)
0.2% or less (0 to 55C), other ranges
0.27ms x (Number of conversion enabled channels + 1)
Approx. 200s (hard filter: time constant of primary delay)
Max. 1.5ms/4 points + scan time (ms)
Detachable terminal block: M3 screw, 20 poles
AWG#22-18 (Use shielded twisted pair cable.)
Photocoupler isolation (no isolation between channels)
500V AC for 1min. (between entire analog input terminals and FG (short-circuit current: 5mA)
10M or more with a 500V DC megger (between entire analog input terminals and FG)
24V DC (+10%, 15%), full-wave rectification
unavailable 100mA or less
5A or less
Basically short-circuited (between V+ and COM)
8 words (input: 6 words, output: 2 words)
Approx. 250g
*1 When the "10 to 10V" or "20 to 20mA" input range is used, the digital output range can
be expanded to "8,000 to 8,000" with the scaling function.
*2 For step response, input filtering time needs to be considered.
Note 1: The maximum deviation of noise is 1% of full scale.
Note 2: At shipment the range is set to "0 to 10V".
Analog Output Unit: NW0AY04-MR

Item
Type
Number of output channels
Output range
External load impedance
Digital value *1
Maximum resolution
Overall accuracy
(full scale)
Sampling time
Output delay time
Load short-circuit protection
External connection
Connection
Applicable wire size
Isolation method
Dielectric strength
External current
consumption (24V DC)
Rush current
Treatment of unused channel
Number of occupied words
Mass
Specification
NW0AY04-MR
4 channels
0 to 5V
0 to 10V 10 to 10V 0 to 20mA 4 to 20mA
1 to 5V
1k or more 2k or more 2k or more 500 or less
0 to 16000 (DEC)
Voltage: 1.25mV
Current: 5A
0.1% or less (23C5C)
0.3% or less (0 to 55C), 1-5V range 0.4% or less (0 to 55C)
0.2% or less (0 to 55C), other ranges
1.0ms or less/4 points
1.0ms or less/4 points + scan time (ms)
Provided
Detachable terminal block: M3 screw, 20 poles

AWG#22-18 (Use shielded twisted pair cable.)
500V AC for 1 min. (between entire analog input terminals and FG (short-circuit current: 5mA)
10M or more with a 500V DC megger (between entire analog input terminals and FG)
200mA or less
240mA or less
24V DC (+10%, 15%), full-wave rectification unavailable
5A or less
Basically open
8 words (input: 2 words, output: 6 words)
Approx. 250g
Item
Type
Number of channels
Input impedance
Input tolerance
Input range
Input
Item
Type
Number of input channels
Input impedance
Input tolerance
Input range
Analog I/O Unit: NW0AW03-MR
Overall accuracy
(full scale)
Conversion rate *1
Input filtering time
Number of channels
Output range
Specification
NW0AW03-MR
2 channels
100k
Voltage input: 15 V
0 to 5V
1 to 5V
0 to 10V
1% or less (0 to 55C)
250
Current input: 30mA
0 to 20mA
4 to 20mA
8ms/2 channels
Approx. 2.2ms (hard filter: time constant of primary delay)
1
0 to 5V
0 to 20mA
1 to 5V
4 to 20mA
0 to 10V
External load impedance 2k or more
500 or more
Conversion rate *2 8ms/channel
Load short-circuit protection Provided
Overall accuracy 1% or less (0 to 55C)

(full scale)
Digital value
0 to 1000 (DEC)
Maximum resolution Voltage: 4mV
Current: 16A
External connection Detachable terminal block: M3 screw, 20 poles
Connection
Applicable wire size AWG#22-18 (Use shielded twisted pair cable.)
Isolation method
Dielectric strength
500V AC for 1min. (between entire analog input terminals and FG (short-circuit current: 5mA)
Insulation resistance 10M or more with a 500V DC megger (between entire analog input terminals and FG)
External current
200mA or less
consumption (24V DC) 24V DC (+10%, 15%), full-wave rectification unavailable
Rush current
5A or less
Treatment of unused channel Input channel shall basically be short-circuited (between V+ and COM); output channel shall basically be open.
Number of occupied words 8 words (input: 4 words, output: 4 words)
Mass
Approx. 250g
Output
Analog Input Unit: NW0AX04-MR
*1 For step response, input filtering time needs to be considered.

*2 Can respond by 0 to 90%
Note 2: At shipment the range is set as follows:
Analog input: 0 to 10V
Analog output: 0 to 10V
*1 When the "10 to 10V" output range is used, the digital input range can be expanded to
"8,000 to 8,000" with the scaling function.
Note 2: At shipment the range is set to "0 to 10V".
11
Specifications
Thermocouple Input Module Specifications

NWOAX04-TC Specifications
Item
Types
Accuracy
Cold contact compensation accuracy
Noise
Effects of external resistance
Resolution
Input filter
Sampling interval
Response time
Occupied words
Isolation method
Dielectric strength
External power supply

External current consumption
Inrush current
Used to the cable
Mass
External connections
Resistance Bulb Input Module Specifications

NWOAX04-PT Specifications
Specification
NW0AX04-TC
4 channels
0.3% or less (23C 5C)
0.7% or less (0 to 55C) *1
1C
0.7% or less (when the shielding compensation cable used)
Approx. 0.35V/
K, T: 0.2C, E, J, U, L: 0.1C
B, R, S, N, PL ll, W5Re, W26Re: 1C
Hardware filter (primary delay time constant): 50ms or less
Approx. 100ms or less / 4 channels
Approx. 100ms or less / 4 channels + Scanning interval (ms)
8 words (Input: 6 words, output: 2 words)
Between analog input terminals and FG: Isolated
Between analog input terminals and channels: Isolated
500V AC 1 minute
Between thermocouple input module terminals and FG
Between thermocouple input module terminals and channels
24V DC (+10 to -15%)
(Full wave rectification power supply cannot be used.)
24V DC: 150mA or less
24V DC: 5A or less
Shielding compensation cable
Approx. 250g
Detachable screw terminal bock (M3) 20 poles
* 1 Precision not assured for B0-399C.
Noise
Allowable resistance of
input wire (per wire)
Resolution
Input filter
Sampling interval
Response time
Occupied words
Isolation method
External power supply

External current consumption
Inrush current
Used to the cable
Mass
External connections
Types and Ranges of the Resistance Bulb Input Module

Types of
thermocouple
input
Celsius (C)
Setting Measuring
Resolution
No.
temperature range data
Fahrenheit (F)
Setting Measuring
Resolution
No.
PT
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Celsius (C)
Fahrenheit (F)
Setting Measuring
Resolution Setting Measuring
Resolution
No.
No.
00
01
02
03
04
B
05
R
06
S
07
E
08
09
10
J
11
12
13
14
T
15
16
N
17
U
18
19
20
L
21
22
23
24
PL II
25
W5Re, 26
W26Re
12
0-1300
0-500
0-800
0.0-500.0
0.0-800.0
0-1800
0-1700
0-1700
0-400
0-700
0.0-700.0
0-500
0-800
0.0-500.0
0.0-800.0
-50-400
-50.0-400.0
0-1300
0-400
0-600
0.0-600.0
0-400
0-900
0.0-400.0
0.0-900.0
0-1200
0-2300
0.1
1
1
1
1
0.1
1
0.1
1
0.1
1
1
0.1
1
0.1
1
1
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
32-2372
32-932
32-1472
32.0-932.0
32.0-1472.0
32-3272
32-3092
32-3092
32-752
32-1292
32.0-1292.0
32-932
32-1472
32.0-932.0
32.0-1472.0
-58-752
-58.0-752.0
32-2372
32-752
32-1112
32.0-1112.0
32-752
32-1652
32.0-752.0
32.0-1652.0
32-2192
32-4172
0.1
JPT
1
1
1
1
0.1
1
0.1
1
0.1
1
1
0.1
1
0.1C
Hardware filter (primary delay time constant): Approx. 200ms or less
500ms/ 4 channels
500ms or less / 4 channels + Scanning interval (ms)
8 words (Input: 6 words, output: 2 words)
Between analog input terminals and FG: Isolated
Between analog input terminals and channels: Unisolated
500V AC 1 minute
Between thermocouple input module terminals and FG
24V DC (+10 to -15%)
(Full wave rectification power supply cannot be used.)
24V DC: 150mA or less
24V DC: 5A or less
Shielding compensation cable
Approx. 250g
Detachable screw terminal bock (M3) 20 poles
Dielectric strength
Types and Ranges of the Thermocouple Input Module

Types of
thermocouple
input
K
Specification
NW0AX04-PT
4 channels
0.3% or less (23C 5C)
0.7% or less (0 to 55C)
0.7% or less (when the shielding compensation cable used)
10 or less
Item
Types
Accuracy
0-200
-50-150
0-400
-200-200
-200-600
0.0-200.0
-50.0-150.0
0.0-400.0
-200.0-200.0
-200.0-600.0
0-200
-50-150
0-400
-200-200
-200-500
0.0-200.0
-50.0-150.0
0.0-400.0
-200.0-200.0
-200.0-500.0
0.1
0.1
32-392
-58-302
32-752
-328-392
-328-1112
32.0-392.0
-58.0-302.0
32.0-752.0
-328.0-392.0
-328.0-1112.0
32-392
-58-302
32-752
-328-392
-328-932
32.0-392.0
-58.0-302.0
32.0-752.0
-328.0-392.0
-328.0-932.0
0.1
0.1
Characteristic Diagrams (Example)

(Thermocouple)
(Resistance Bulb)
Conversion value (INT type)
Conversion value (INT type)
8400
8000
4200
4000
Temperature input
practical range
0.1
-400
1
1
-400
K, J : 0.0-800.0C
8000 8400
Temperature
input value (C)
Temperature input
practical range
-200.0
-2000
Temperature
400.0 420.0 input value (C)
PT, JPT : 0.0-400.0C
Communication Adapter Specifications
Transmission specifications
External interface
Item
Transmission standard
Port
Transmission mode
Synchronization mode
Transmission rate
Connection method
Cable
Transmission procedure
Specification
RS-485
1 channel
Half-duplex transmission
Start-stop transmission
1,200/2,400/4,800/9,600/19,200/38,400 bps
1km or less (with a transmission rate of 19,200 bps or less)
1:31 (max.)
European type removable terminal board (5 pins)
Twisted pair cable with shield
Nonsequenced transmission / command set type
transmission
Transmission control code Binary (without code conversion) or ASCII (with code
conversion), EBCDIC (with code conversion)
Error control Hardware Vertical parity (parity bit), framing, overrun error
Software Horizontal parity (BCC)
Bit send-out order
Sent from LSB to MSB
Data length that can be sent/received Max. 512 bytes (depends on mode)
at a time (seen from SPB)
Start code
None, data with a length of 1 to 5 bytes
End code
Data with a length of 1 to 5 bytes
Character configuration Start bit: 1 bit
Data bit : 7 or 8 bits
Parity bit: None, odd, even
Stop bit: 1 or 2 bits
Item
Transmission standard
Port
Transmission mode
Transmission rate
Connection method
Transmission procedure
External interface
<General-purpose communication, basic specifications>
Transmission specifications
Specification
RS-232C
1 channel
1,200/2,400/4,800/9,600/19,200/38,400 bps *1
15m or less
1: 1
D-Sub 9 pins, male
Nonsequenced transmission / command set type
transmission
Transmission control code Binary (without code conversion) or ASCII (with code
conversion), EBCDIC (with code conversion)
Error control Hardware Vertical parity (parity bit), framing, overrun error
output type Software Horizontal parity (BCC)
Bit send-out order
Sent from LSB to MSB
Data length that can be sent/received Max. 512 bytes (depends on mode)
at a time (seen from SPB)
Start code
None, data with a length of 1 to 5 bytes
End code
Data with a length of 1 to 5 bytes
Character configuration Start bit: 1 bit
Data bit: 7 or 8 bits
Parity bit: None, odd, even
Stop bit: 1 or 2 bits
*1 When using transmission rate 38400 bps, mount a ferrite core to the communication
cable. For details, refer to RS-232C/RS-485 Communication Adapter (FEH405) Users
Manual.
<Simplified CPU link, basic specifications>

Item
Link area
Communication form
Refresh time
Communication between link
Communication specifications

Link capacity
(1 station)
Others
System specifications
Connection target
Communication access mode

Transmission level
Transmission mode
Transmission rate
Connection method
Cable
Master station
Configuration
registration
Self diagnosis
Insertion and removal
of active wire
Specification
SPB series basic unit
FLEX-PC NB series NP link micro,
only with data link function
16 units max.
N mode: Variable: selected to 2, 4, 8, 16, or 32 words
(through parameter setting)
SX mode: Fixed to 8 words
(when operating mode 21H is selected)
Data register (D) area is used. (D1E00 to D1FFF)
Bus
130ms or less/16 stations, 32 words for each station
(When the SX mode is selected, with a scan time of 5ms or less),
excluding the case when the loader network function is used
Polling/selecting mode
Conforms to EIA standard, RS-485.
115,200 bps (when the SX mode is selected)
19,200 bps (when the NB compatible mode is selected)
500m or less
European type removable terminal board (5 pins)
Twisted pair cable with shield
Fixed to station 0 (station number set by parameters)
Whether configuration is registered or not can be selected.
(Registered to station 0 only when the SX mode is selected)
Communication monitoring (omitted data bits,addition)
Insertion and removal of link active wire are possible.
13
External Connection Diagrams
External Connection Diagrams

20-points Basic Unit
Internal
power
circuit
+
24V COM
A
B
AC
-N
Ry
Ry
Ry
Ry
*1
L
*1
*1
4
5
8
7
L
L
85 to 264V AC
*4
AC
-N
AC
-L
Ry
FG COM
*1
*1
Ry
Ry
Ry
COM
2
*1
L
L
*1
6
COM
85 to 264V AC
*4
Ry
Ry
Ry
10
14
12
AC
-N
AC
-L
L
L
Ry
Ry
*1
L
L
*1
L
*1
L
*1
17
E
D
COM
*1
L
L
Ry
NC
*1
COM
Ry
Ry
NC
*1
Ry
FG COM COM COM COM COM
85 to 264V AC
*4
*1 Power source
16
13 15
11
*3
Ry
L
L
2
1
Internal
power
circuit
L
L
0V COM
Ry
*1 Power source
16-points Output Expansion Unit
16-points Input Expansion Unit

+
24V DC
OUTPUT
Ry
5
4
L
L
*1 Power source
+
24V COM
C
B
*3
Ry
*1
2
1
Internal
power
circuit
*3
Ry
0V COM
2
1
0V COM
*2
+
24V COM
AC
-L
24V DC
OUTPUT
*2
*2
24V DC
OUTPUT
24V DC
OUTPUT
*1
*2
+
24V COM
0V COM
2
1
6
5
8
7
A
9
E
D
10
F
12
11
14
18
16
13 15
1C 1E
1A
19
17
1B 1D
20
22
1F
21
COM
0
23
COM
COM
7
L
L
*1
2 COM
Ry
Ry
Ry
Ry
Ry
Ry
*3
Internal
power
circuit
*3
AC
-N
AC
-L
Ry
Ry
Ry
Ry
*1
L
*1
L
L
L
L
L
NC
7
COM
*1
NC
L
L
*1
Ry
L
L
11
*1
L
L
L
L
14
L
L
85 to 264V AC
*4
17
L
L
L
L
32-points I/O Expansion Unit
COM COM
7
COM COM
2
1
6
5
8
7
E
D
Ry
COM
F
L
L
Ry
*1
Ry
Ry
*1
L
4
COM
Ry
Ry
A COM
L
L
*1
AC
-L
*1
L
L
Ry
Ry
AC
-N
*1
2
1
6
5
Ry
*1
Ry
Ry
6 COM
*1
L
L
COM
3
L
L
Note: 1 The figure above indicates external connection of the AC power supply/Ry output type.
*2 The DC power supply is not applicable
*3 The transistor type connection is shown below.
to service power supply.
FG COM
*1 Power source
Tr sink
0V COM COM COM
Ry
L
L
Ry
Ry
E
D
10
F
14
12
18
16
13 15
11
1C
1A
19
17
L
L
COM D
A
9
L
L
Ry
10 12
*1
L
L
L
L
Ry
1E
1D
1B
1F
15
*1
85 to 264V AC
1B
L
L
L
L
*1 Power source
FG
24V+
+
L
COM
L
L
*1
*4 The terminal arrangement of the DC power supply is shown below.
18 1A
17 COM 19
L
L
Ry
Ry
16 NC
14
NC
13 COM
E COM 11
*1
Ry
Ry
0V
Y
COM
Tr source
Internal
power
circuit
*1 Power source
14
*1
+
24V COM COM COM
Ry
COM
C
COM
Ry
*1
Ry
*1
A
9
*3
COM
6
5
Ry
*1
*2
*3
COM
7
COM
Ry
COM
6
5
24V DC
OUTPUT
+
4
3
2
Ry
*1 Power source
+
1
0
3
2 COM
Ry
*1 Power source
COM
COM
16
13 COM 15
*1
Ry
Ry
Ry
12 NC
10
NC
F COM
B COM
L
L
Ry
Ry
*1
Ry
Ry
*1
*1
Ry
Ry
Ry
Note: 2 The output terminal

can be used as a pulse output terminal in the case of transistor output.
Note: 3 For external connection of communication adapters, refer to RS-232C/RS-485 Communication Adapter (FEH405) Users Manual.
Note: 4 For external connection of analog unit, refer to Analog Unit (FEH407) User's Manual.
+
24V DC
Control Functions
Enabling various controls with standard functions
Pulse Train Output Function
High-speed Counter Function
With basic units of the Tr output type, the terminal for output bits 0
and 1 can be used not only as a usual external output but as pulse
output with up to 100kHz.
The pulse output can be operated with dedicated instructions, allowing easy control based on pulse train output and pulse width
modulation.
Pulse Train Output
Positioning control with servo motors and stepping motors is possible without specialized units, based on the pulse train output instruction, return-to-origin instruction, relative positioning instruction,
absolute positioning instruction, and other positioning instructions.
Pulse train
ON/OFF
The SPB has a built-in high-speed counter which can count pulses
at a maximum rate of 100kHz for a single phase or 50kHz for two
phases.
Specification
Item
Specification
1-phase
2-phasee
Method
Preset increment counter Preset increment/decrement counter
Count input signal 1-phase increment signal x 2 ch 90-deg.phase difference 2phase signal x 1 ch Counting pulse + Direction input x 1ch
Control input Reset
Counting speed Max. 100kHz
Max. 50kHz
Counting range Unsigned binary 16 bits Signed binary 32 bits
Multiplication
x1, x2
x2, x4
x1
Reset
Soft reset by control input and command register
Preset
Soft reset by control command register
<Sample Application for Packing Machine>

Encoder
The encoder output pulse can be

input to the high-speed counter to
control such a high-speed
operation.
<Operation Patterns>
Return to origin
Relative positioning
Absolute positioning
Frequency
Melting
signal
Print
signal
Frequency
Start
Origin signal ON Origin signal OFF
Cutting
signal
Current position
Target position
Number of output pulses

Rotational direction
ON: Forward OFF: Reverse
signal
Constant Scan Function

For the control of a machine which outputs at constant intervals,
constant scan can be set to suppress the irregular I/O operating
times. Constant scan can be set in the range from 1 to 255 in units
of 1 msec.
Pulse Width Modulation

The pulse width modulation instruction allows pulse output with
variable pulse ON width and pulse interval with the following specifications, enabling light control.
Program execution
Set time
Wait time
Set time
Time is extended for the excess.

Set time
Set time
ON
OFF
Pulse ON width
Pulse interval
Interrupt Input Function

The SPB has an interrupt input function for interrupting normal
program operation to initiate an interrupt program. It executes the
interrupt program at the rise of the input from X0 to X3.
Pulse Catch Function

Regardless of the input filter time setting, the pulse catch function
allows the SPB to detect a pulse (min. 50sec.) shorter than the
scan time and output it at the following scan. It can be used for
detecting an object which moves at high speed.
I/O
Program execution
Scan
Scan
Scan
Analog Timer Function

The SPB has two analog timers
as standard. Each timer value is
converted to a digital value of 0
to 255 in the SPB and stored in
the internal memories.
External signal
Internal relay
Analog Timer
15
Programming Languages
One type of hardware applicable to two languages
SX mode: Applicable to MICREX-SX (IEC61131-3 compatible language)
N mode: Applicable to FLEX-PC N (IEC61131-3 incompatible language)
Programming support tool D300win

SX mode programming support tool NP4H-SEDBV3
IEC61131-3 compatible programming enabled
Compatible with the IEC 61131-3 international

standard
The use of a programming language system in compliance with
international standards allows the user to produce programs that
are understandable worldwide.
The MICREX-SX Series SPB is a programmable controller compliant with the above standards.
Replacing system software

The SPB system software is in N mode when shipping from the
factory.
To use it in SX mode, download the SX mode system software
using the system software utility for D300win V3.1 or up.
N mode programming
N Series
PC loader
Handy loader
[Shipped in N mode]
System software
update
Use of program components

Reuse of components improves the programming efficiency.
Programming with labels (variables)
Use of components through function blocks (FBs)
Language set
Five programming languages specified in IEC standards are all
supported.
Optimum program expressions for the control contents can be
used in combination.
IL language: Reducing application size
ST language: High-level language (IF, THEN, ELSE, etc.)
LD language: Replacing relay boxes
FBD language: Data processing system
SFC element: Application structure description
Ample instruction words

Sufficient instruction words, as many as 202 types, enable to
write any kind of programs at will.
16
D300win V3.1 or up
SPB System Software Utility
[N mode SX mode]
SX mode programming
D300win V3.1 or up
[Used in SX mode]
Notes:
1. The SPB handy loader is disabled in SX mode. It is enabled only in N mode.
2. SX mode is enabled for SPB main unit version of V 10 or up.
**
Simulation function
Use of FBs for user-original circuits
Use of the simulation-dedicated software PLC function built in

D300win enables logical testing of the program without using the
actual unit.
Simulation is carried out for the program written in the programming
language compliant with IEC61131-3. Because it enables monitoring
or forced ON/OFF of an arbitrary signal, it can be expected to raise
the programming and/or debugging efficiency for the SX Series.
Formalized programs or circuits used frequently can be easily reused by creating FBs. For creating user FBs, the language applicable to IEC61131-3 supported by D300win is available and no special languages are necessary. The function placed in a library form
can be used alone efficiently without considering about debugging.
In addition, creating an FB for individual control blocks facilitates
circuit standardization and structuring.
Operation environment
Item
Hardware
CPU
Hard disk
Specification
IBM-PC/AT compatible
Intel Pentium 233MHz or higher (when WindowsXP used, 350MHz or higher recommended.)
Free space of 220M bytes or more
For D300win system software: 100M bytes or more
For standard expansion FB package: 120M bytes or more
CD-ROM unit
1 unit (x 4 speed or faster), media: ISO 9660 format
Memory capacity
64M bytes or more (128M bytes or more recommended)
Keyboard
101 keyboard (when japaneas OS used, 106 keyboard)
Mouse
USB mouse, bus mouse, or PS2 mouse
Indicator
800 x 600-dots resolution or higher (1024 x 768-dots resolution or higher recommended)
Communication interface RS-232C 9,600bps to 57,600k bps (default setting according to the resource model selection)
OS
WindowsNT4.0(SP6 or higher), 2000, XP
Portability
Depends on a commercial mobile personal computer.
Environmental durability
Depends on environmental condition of a commercial personal computer.
System Configuration
Personal computer
SPB
RS-232C
Support tool connection cable: NW0H-CA3

+
RS-232C/RS-422 signal converter: NW0H-CNV
D300win
17
Programming Languages
Loader Software for Personal Computer

N mode programming support tool SX-Programmer Standard: NP4H-SWN
Enables same programming as FLEX-PC N Series
Free-form circuit layout

Ladder diagram ruled lines and instruction symbols can be
optionally arranged by a simple operation.
Ruled line write/delete
Ruled lines can be written by Ctrl+Arrow keys or deleted by
Ctrl+Alt+Arrow keys.
Instruction symbol write
An instruction symbol can be optionally arranged by clicking on
the corresponding icon or function key.
Improved program edit and debugging workability

Information required for program edit/debugging can be displayed
in a single window with the divided display feature showing a
program and a datasheet or the filter function* for indicating only
the circuit which uses a specific address or instruction.
<2-divided display>
<Filter function>
Filter display of a circuit

containing the specified
address.
Support of the full-keyboard facilitates expeditious program editing and debugging in the field.
Display/edit in 2 languages of ladder language and instruction words (mnemonic)

A circuit or the entire program can be displayed/edited in mnemonic (instruction words).
<Partial display/edit window>
18
<Overall display/edit window>
Operation environments
Item
Specification
Hardware
IBM-PC/AT compatible
CPU
Intel Pentium 100MHz or higher
Hard disk
Free space of 10M bytes or more (100M bytes or more recommended.)
CD-ROM unit
1 unit (x 4 speed or faster), media: ISO 9660 format
Memory capacity
32M bytes or more
Keyboard
101 keyboard (when Japanese OS used, 106 keyboard)
Mouse
USB mouse, series mouse, bus mouse, or PS2 mouse
Indicator
800 x 600-dots resolution or higher
Support tool connection cable:

NW0H-CA3
+
RS-232C/RS-422 signal converter:
NW0H-CNV
RS-232C
(1024 x 768-dots resolution or higher recommended)

Communication RS-232C 9,600bps to 57,600k bps
interface
(Transmission speed is set automatically by the model for resource.)
OS
Windows95,98,Me,NT4.0(SP6 or higher), 2000, XP

Depends on a commercial mobile personal computer.
Portability
SPB
Personal computer
Depends on environmental condition of a commercial
NP4H-SWN
personal computer.
Handy Loader
A "palm-top" handy loader with maintenance function: NW0H-NE (English), NW0H-N (Japanese)
Palm size convenient for portable use

Program edit and data monitor can be performed in the compact
unit 90(W)x148(H)x38(D).
Flash memory built in for user program storage

Two user programs with up to 32K steps can be stored in the internal memory of the handy loader. Stored programs can be copied to
multiple basic units. The program in a basic unit can be compared
with the program in the handy loader, allowing easy secure copy
operation.
* Note that user data is not stored.
The SPB handy loader is disabled in SX mode. It is enabled only in N mode.
1 Store
Basic Specifications
2 Copy
Flash
Memory
Item
Specification
Display section
LCD 16 characters x 2 lines with backlight
Keyboard section
40 embossed sheet keys with buzzer
User program memory
Built-in flash memory
Processor connection
RS-422
Handy Loader
3 Verification
19
Online Adapter
Facilitating configuration of remote maintenance system
Online Adapter: FOA-ALFA2
Features
Specifications
This module allows easy remote maintenance system

configuration simply by connecting the online adapter to the
loader port without changing any program on the PLC
(MICREX-SX SPH/SPB) side. The SPB is based on SX mode.
Bi-directional communication between the master station
(personal computer) and slave station (SPH)
Diverse functions
Failure monitor function Data accumulation function
Integrated time monitor function
Communication functions of the each PLCs
Calendar functions (year, month, day, hour, minute, second),
and data backup functions (data memory, calendar IC
memory) are provided too.
General specifications
Item
Physical
environment
Mechanical
operating
condition
Electrical
operating
condition
Operating ambient
temperature
Storage temperature
Relative humidity
Contamination
Corrosion resistance
Operating altitude/air
pressure
Resistance to
vibration
Resistance to shock
Resistance to noise
Resistance to
electrostatic
discharge
Resistance to
radiation
electromagnetic field
Cooling system
Insulation
characteristic
Power supply method
Current consumption
Mass
Calendar accuracy
Battery type/operating life
Specification
0 to 55C (without condensation)
-20 to 70C (without condensation)
20 to -90%RH (without condensation)
Contamination level 2
No corrosive gas is present, no organic solvent adhesion
Altitude of 2000m or less (air pressure of 70kPa or higher
during transportation)
One amplitude: 0.15mm, constant acceleration: 9.8m/s2, 2
hours for each direction, 6 hours total
Peak acceleration: 294m/s2, 3 times for each direction
Noise simulator method, rise time of 1ns, pulse width of 1s,
1kV
Contact discharge method: 6kV, air discharge method: 8kV
10V/m (80 to 1000MHz)
Natural cooling
10M or more (between connectors and ground) with a 500V DC
megger
Supplies 24V DC from PC or 12V DC from AC adapter.
24V: 60mA or less
12V: 120mA or less
Approx. 320g
90 seconds/month (25C, conduction)
Lithium primary battery 3.6V
NP8P-BT (Fuji Electric FA Components & Systems Co., Ltd.)/
5 years (ambient temperature of 25C)
Note: For operating environment, take into consideration the specifications of the
communication devices used.
* Use the AC adapter only at the time of initial setup data transmission. Do not use it for
connection with SPH/SPB (SX mode).
Functional specifications
Mode
Online adapter mode
Loader mode
Remote mode
Online Adapter
Initial setup mode

Memory clear mode
Contents
Execution mode of various monitor functions
Monitors SPH/SPB (SX mode) programming monitor locally.
Monitors SPH/SPB (SX mode) programming monitor from a
remote site.
Writes setup data necessary for various monitor functions
using the initial setup loader.
Backup memory initialization (clear) mode
Communication
network
Online adapter
FOA-ALFA2
Specialized connection
cable (option)
NW0H-CA3
Communication
device
Performs various monitor functions and

communication setup using the initial
setup loader (FOA-LOADER2-CD).
Initial setup loader (Model: FOA-LOADER2-CD)

<Japanese version>
Creates initial setup data (each function setup).
Sets the failure monitor, data accumulation, integrated time
monitor functions and registers AT commands for
communication.
Writes the initial setup data to the online adapter.
Reads the initial setup data from the online adapter.
Master Station Monitoring Software

(Model: FOA-CENTER2-CD)
<Japanese version>
Slave station monitor function (reception of notification from slave
station)
Failure monitor function Data accumulation function
Integrated time monitor function
20
Communication
device
Performs remote monitor, e-mail

sending, and data monitoring using
the master station monitoring software
(FOA-CENTER2-CD).
Access from the master monitor software (personal computer)

to slave station.
Reads data accumulated in the online adapter.
Automatically collects data by time specification (with circuit
connection each time).
Updates the initial setup data from a remote site. (Remote
update function)
Uses the personal computer loader software from a remote
site.
Other functions
Saves receive data as CSV files.
Monitors accumulated data in bar graph form.
Upon reception of failure information, automatically transfers
the failure information to E-mail-based mobile tool through
the internet using the online adapter.
Dimensions
[mm]
Basic Unit / Expansion Unit
81
2-4.5 (for M4 screw)

SND
RCV
80
90
90
*1
Approx. 50
40
RS-232C
*1
(51.5)
30
40
48
W1
W2
67

20-point basic unit
80
70
30-point basic unit
110
100
40-point basic unit
140
130
60-point basic unit
180
170
16-point expansion unit
64
54
110
100
180
170
RUN
SDA
SDB
80
W1
90
W2
RDA
RDB
SG
Approx. 50
RS-485
(17.5)
30
40
48
Note: The mounting hole of a basic unit of 60 point type is on four corners.
Other units has not the mounting hole on *1 part.
Analog Unit
8
67
Handy Loader
Analog Input Unit:

NW0AX04-MR
Analog Output Unit:
NW0AY04-MR
Analog I/O Unit:
NW0AW03-MR
Thermocouple Input Module: NWOAX04-TC
Resistance Bulb Input Module: NWOAX04-PT
English:
NW0H-NE
Japanese: NW0H-N
8
38
90
-MR
28
48
INS
WR
87
Note: When analog unit and basic unit are installed and connected together, the
distance between them must be approx. 10 to 20 mm.
DEL
LD
X
AND
M
OR
L
LDI
Y
ANI
S
ORI
T
TEST
AUX
OUT ANB ORB

C
D
E
SET
8
PLS
9
INV
B
RST
4
PLF MCR RET

5
6
7
MC
A
MNT
HELP CLR
148
RD
NW0A
For ratings see instruction manual
Analog Unit
82
90
FNC
P/I
SP
STEP
K/H
-
NOP MPS MRD MPP END

0
1
2
3
GO
82
21
Ordering Informations
Standards
Certificated
Under planing
---
No planing
Exceptions
Basic Unit
Products names
Types
Specifications
(= Ordering codes)
Power specifications
Input specifications
Output specifications
Standards
NW0P20R-31
100 to 240V AC
24V DC 12 points
Ry 8 points
NW0P20T-31
Ry 8 points
Tr sink 8 points
NW0P20U-34
NW0P30R-31
Tr source 8 points
100 to 240V AC
24V DC 16 points
NW0P30T-31
Tr source 14 points
24V DC
Ry 14 points
NW0P30T-34
Tr sink 14 points
NW0P30U-34
NW0P40R-31
Tr source 14 points
100 to 240V AC
24V DC 24 points
Ry 16 points
NW0P40T-31
Tr sink 16 points
NW0P40U-31
Tr source 16 points
NW0P40R-31C
Ry 16 points
NW0P40T-31C
Tr sink 16 points
NW0P40U-31C
NW0P40R-34
Tr source 16 points
24V DC
Ry 16 points
NW0P40T-34
Tr sink 16 points
NW0P40U-34
Tr source 16 points
NW0P40R-34C
Ry 16 points
NW0P40T-34C
Tr sink 16 points
NW0P40U-34C
Ry 14 points
Tr sink 14 points
NW0P30U-31
NW0P30R-34
NW0P60R-31
Tr source 16 points
100 to 240V AC
24V DC 36 points
Ry 24 points
NW0P60T-31
Tr sink 24 points
NW0P60U-31
Tr source 24 points
NW0P60R-31C
Ry 24 points
NW0P60T-31C
Tr sink 24 points
NW0P60U-31C
NW0P60R-34
LR
Tr source 8 points
24V DC
NW0P20T-34
UL/cUL
Tr sink 8 points
NW0P20U-31
NW0P20R-34
CE
Tr source 24 points
24V DC
Ry 24 points
NW0P60T-34
Tr sink 24 points
NW0P60U-34
Tr source 24 points
NW0P60R-34C
Ry 24 points
NW0P60T-34C
Tr sink 24 points
NW0P60U-34C
Tr source 24 points
Note: Pulse train output and PWM output are not available for relay output.
Expansion Unit
Digital I/O Unit
Types
Specifications
(= Ordering codes)
Power specifications
Input specifications
Output specifications
16-points
NW0E16X
No power sourc
24V DC 16 points
expansion unit *1
NW0E16R-0
Ry 16 points
Products names
Standards
Tr sink 16 points
NW0E16T-0
Tr source 16 points
NW0E16U-0
NW0E16R-3
24V DC 8 points
Tr source 8 points
NW0E16U-3
32-points
NW0E32R-3
expansion unit *1
NW0E32T-3
24V DC 16 points
NW0E60R-31
expansion unit *1
*1 50mm expansion cable is supplied as accessory.
22
Ry 16 points
Tr sink 16 points
Tr source 16 points
NW0E32U-3
60-points
Ry 8 points
Tr sink 8 points
NW0E16T-3
Prpvided power sourc
24V DC 32 points
Ry 28 points
CE
UL/cUL
LR
Analog Unit
Products names
Types
Specifications
Standards
(= Ordering codes)
CE
Analog Input Unit
NW0AX04-MR
Multi-range input: 4ch, Resolution: 14 bits (voltage / current)
Analog Output Unit
NW0AY04-MR
Multi-range output: 4ch, Resolution: 14 bits (voltage / current)
Analog I/O Unit
NW0AW03-MR
Multi-range input: 2ch, Multi-range output: 1ch, Resolution: 10 bits (voltage / current)
Thermocouple Input Module
NW0AX04-TC
Input: 4ch
Resistance Bulb Input Module
NW0AX04-PT
Input: 4ch
UL/cUL
LR
Products names
Types
Specifications
Standards
(= Ordering codes)
CE
RS-232C adapter
NW0LA-RS2
RS-232C 1 channel (general-purpose communication mode, loader interface mode)
RS-485 adapter
NW0LA-RS4
RS-485 1 channel (general-purpose communication mode, loader interface mode, simplified CPU link mode)
Types
Specifications
UL/cUL
LR
Option
Products names
Standards
CE
UL/cUL
LR
Memory card
NW8PMF-8
Flash ROM (for 40/60-points basic unit)
---
---
---
Battery
NW8P-BT
Lithium battery for backup
---
---
---
(= Ordering codes)
Programming Loader
Products names
Types
Standards
Specifications
(= Ordering codes)
SX-Programmer
NP4H-SWN
Standard
Programming support
CE
UL/cUL
LR
---
---
---
---
---
---
Windows NT4.0 Workstation (Service Pack 6 or later)/2000, XP compatible

NP4H-SEDBV3
tool D300win
Handy loader
For N mode, CD-ROM, English/Japanese edition, English/Japanese manual (PDF)

For SX mode, CD-ROM, English/Japanese edition, English/Japanese manual (PDF)
Windows NT4.0 Workstation (Service Pack 6 or later)/2000, XP compatible, Version 3
NW0H-NE
English type: 1000mm loader cable x1: supplied as accessory (Type: NB-EC0100)
NW0H-N
Japanese type: 1000mm loader cable x1: supplied as accessory (Type: NB-EC0100)
Loader Option
Products names
Types
Specifications
Standards
(= Ordering codes)
PC connection adapter
NW0H-CNV
CE
UL/cUL
LR
---
---
---
---
---
---
(combined with the optional loader cable: NW0H-CA3)
(Signal converter)
Loader cable
For personal computer loader-basic unit connection, RS-232C/RS-422 conversion,
NW0H-CA3
Connection cable for personal computer loader-basic unit: 3000 mm straight cable
(combined with the optional PC connection adapter: NW0H-CNV)
Online Adapter
Standards
Products names
Types
Ordering codes
Specifications
Online adapter
FOA-ALFA2
NP1L-FOA
Adapted to MICREX-SX SPH/SPB (SX mode ) series.
Initial setup loader software

<Japanese version>
FOA-LOADER2-CD NL4N-WNOL
CD-ROM, (Adapted to SPH versions: LV3.00.25 or higher)
---
---
---
Master station monitoring software

<Japanese version>
FOA-CENTER2-CD
CD-ROM, (Adapted to SPH versions: LV3.00.24 or higher)
---
---
---
CE
NL4N-WNOC
UL/cUL
LR
Microsoft, Windows, Windows NT are trademarks of Microsoft Corporation in the USA and other countries.
Pentium is trademarks or registered trademarks of Intel Corporation.
And other companies name, products name in this catalog, are trademarks or registered trademarks of the each companies.
23
Safety Considerations
For safe operation, before using the product read the instruction manual or user manual that comes with the
product carefully or consult the Fuji sales representative from which you purchased the product.
Some of the products listed in this catalog may have limits on their use or location or may require periodic
inspections. Call Fujis sales representative for further information.
For safe operation, wiring should be conducted only by qualified engineers who have sufficient technical
knowledge about electrical work or wiring.
Appearance and specifications are subject to change without prior notice for the purpose of product improvement.
Fuji Electric FA Components & Systems Co., Ltd.

Gate City Ohsaki, East Tower
11-2, Osaki 1-chome, Shinagawa-ku, Tokyo, 141-0032, Japan
Phone:
Fax:
URL
+81-3-5435-7135~8
+81-3-5435-7456~9
http://www.fujielectric.co.jp/fcs/eng/
Materials covered in this document are subject to revision due to the modification of the product.
2004-9 (I04c/D01) FIS

Micrex-Sx SPB Leh984c

Uploaded by

Copyright:

Available Formats

Micrex-Sx SPB Leh984c

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Micrex-Sx SPB Leh984c

Uploaded by

Copyright:

Available Formats

Integrated Controllers

Programmable Logic Controller

Online program edit function

Ideal for reducing control panel space.

20-points basic unit

External Dimensions (mm)

Two programming languages

International standards conformity

Two analog timers

Communication & Networking

POD direct connection

Programming with rich memory

Allows program modification without interrupting machine operation.

There are Included the initiated value of the retain memory.

Diversified functions for expanding applications

Adapted to analog control

Multi-range (voltage / current) adapted. 3 types of analog unit

Self-lifting terminal block & Finger protection

30-points Basic Unit: NW0P30 -

Power voltage: 100-200V AC, 24V DC

Power voltage: 100-200V AC, 24V DC

40-points Basic Unit: NW0P40 -

60-points Basic Unit: NW0P60 -

Power voltage: 100-200V AC, 24V DC

Power voltage: 100-200V AC, 24V DC

16-points I/O Expansion Unit: NW0E16 -3

Analog Input Unit: NW0AX04-MR

Input: 8 points, Output: 8 points

Multi-range input: 4ch

Analog Output Unit: NW0AY04-MR

16-points Input Expansion Unit: NW0E16X

Multi-range output: 4ch

Analog I/O Unit: NW0AW03-MR

16-points Output Expansion Unit: NW0E16 -0

32-points I/O Expansion Unit: NW0E32 -3

Multi-range input: 2ch

Thermocouple Input Module: NW0AX04-TC

Resistance Bulb Input Module: NW0AX04-PT

60-points I/O Expansion Unit: NW0E60R-31

Power voltage: 100-200V AC

Memory Card: NW8PMF-8

Expansion Digital I/O System

Max. digital I/O points

System with 60-point digital I/O units

points (60 +60 +60 +60 +60 +60)

Maximum five units (system with 60-point digital I/O units)

60 points digital I/O unit

Maximum three units (up to 64 I/O points)

Maximum five units (system including 60-point digital I/O unit)

System with a combination of 16- and 32-point digital I/O units

Maximum three units (up to 64 I/O points)

Expansion Analog System

Maximum 3 units (12 analog I/O points )

Maximum 3 units (64 or less digital I/O points + analog unit)

System with 60-point digital I/O units

Maximum 3 units (64 or less digital I/O points

Maximum 3 units (64 or less digital I/O points + analog unit)

Points for system expansion