This document provides instructions for using an LG TONE+ Bluetooth headset. It describes how to wear, charge, pair and operate the headset as well as troubleshoot issues. Button functions and specifications are also outlined.
This document provides instructions for using an LG TONE+ Bluetooth headset. It describes how to wear, charge, pair and operate the headset as well as troubleshoot issues. Button functions and specifications are also outlined.
This document provides instructions for using an LG TONE+ Bluetooth headset. It describes how to wear, charge, pair and operate the headset as well as troubleshoot issues. Button functions and specifications are also outlined.
This document provides instructions for using an LG TONE+ Bluetooth headset. It describes how to wear, charge, pair and operate the headset as well as troubleshoot issues. Button functions and specifications are also outlined.
Rev 1.0 US All rights reserved. LG Electronics Inc., 2012 Note: Please read all information carefully prior to using HBS-730 in order to prevent damages to the product and to enjoy the best performance. WARNING : This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm. Wash hands after handling.
Table of Contents
ENG 2
Introduction - Included in the package
3 3
Description of Parts 4 How to Use 4 - Wearing 4 - Charging 5 - Low Battery 5 - Battery Status Alert 5 - Power On / Power Off 5 - Pairing 5 - Multi-connection 6 - Auto Reconnect 7 - Audio Streaming 7 - Equalizer 8
- aptX 8 - Volume Control 8 - Calling 8 Answering a call 8 Transferring a call 8 Voice dialing 9 Last number redial 9 Ending a call 9 Call waiting 9 Rejecting a call 9 Mic mute 9 - SMS reader 9 Summary of Button Functions 10 LED Indication 11 Troubleshooting11 Specification12 Precautions12 Declaration of Confirmation 13 Additional Information 13 Limited Warranty 16 Important Safety Information 16
ENG
Introduction The LG TONE+TM (HBS-730) is a light weight wireless headset that uses Bluetooth technology. This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free Bluetooth Profile.
VOLUME UP Button VOLUME DOWN Button CALL Button, LED Indicator Microphone Earphone (L)
How to Use
- When the charger is connected, with the power on or off, the headset will turn off. - While charging, the LED indicator will show a solid red light. - When charging is complete, the LED indicator will turn off.
ENG
Charging
Low Battery - A low battery alert will play once every 2 minutes. - If the battery is not charged, the headset will turn off. Battery Status Alert - By pressing and holding the VOLUME DOWN button for 1 second, you can check the battery status of the HBS-730 while in standby mode or playing music. The audible battery status alert will inform you of the battery level. There are 3 levels of battery power: 1. Battery High 2. Battery Medium 3. Battery Low
- HBS-730 battery status indicator will appear on the iPhone screen.
Power On / Power Off - Slide the power switch to the ON or OFF position. Pairing - Before using the headset for the first time, you must pair it with a Bluetooth-enabled device. - There are 2 pairing mode methods with the HBS-730. 1) Easy Pairing a) Slide the power switch to the ON position. b) If it is your first time pairing the device it will automatically enter pairing mode. If it has been paired but no paired device is in range it will enter pairing mode after 10 seconds. 5
How to Use
ENG
The LED indicator will be solid blue.
c) O n the device you wish to pair, find the Bluetooth menu and search for or add new devices. d) Select LG HBS-730 from the list of devices. e) If asked for a Pass/Pin Code enter 0000 (4 Zeros). f) O nce the devices are paired, you will hear headset paired. The HBS-730 will automatically turn off if not paired within 3 minutes. 2) Manual Pairing (pairing with another phone or re-pairing) a) With the power off, press the CALL button and slide the power switch to the ON position at the same time for 1 second. b) When the headset enters Pairing Mode, the LED indicator will show a solid blue light. After the procedure repeat Easy Pairing steps c) through f. Multi-connection Advanced Multipoint The HBS-730 is capable of having two devices connected to the headset at the same time. This will give you the freedom of using call waiting between calls on both of your connected phones. Connection - Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing instructions on page 6). - Turn off the headset. - With the power off, press the CALL button and slide the power switch to the ON position at the same time for 2 seconds to enter Manual Pairing mode. - Now, pair and connect the headset with your other Bluetooth-enabled handset. (this will be your primary handset). - Once this handset is paired and connected, go back and connect the originally paired handset to the headset. This will now be your secondary handset. * NOTE: When the HBS-730 is connected to two handsets at the same time(Multipoint), the headset calling functions will work with the primary handset. * NOTE: In case of failure to connect to the primary phone through Easy Pairing, HBS-730 will enter pairing mode.
Call Waiting - While speaking on an active call, press the call button for 1 second to switch to an incoming call. - To switch between 2 active calls, press the call button for 1 second. - To end both calls briefly press the call button. - If both handsets are receiving an incoming call, the headset will default to the primary device.
ENG
How to Use Calling Function - Voice Dialing and Last Number Redial features work with the primary handset (or handset which made the last outgoing call).
Auto Reconnect - If the HBS-730 is turned off (either accidentally or intentionally) while connected to a handset, the headset and handset will disconnect. The headset and handset will automatically reconnect when the HBS-730 is turned back on while in range. Out of Range - If the paired devices are separated by a range of 33 feet (10 meters) or more, the headset and handset will disconnect and HBS730 will vibrate to alert. - If the headset and handset do not automatically reconnect when they are back within the required range, briefly press the CALL button on the HBS-730 to reconnect manually. Audio Streaming Play - Briefly press the PLAY/PAUSE/STOP Button. Pause - While playing music, briefly press the PLAY/PAUSE/STOP button. Stop - While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second. Next song - Briefly press the FF button. Previous song - Briefly press the REW button.
How to Use
ENG
Fast Forward - Press and hold the FF button. Rewind - Press and hold the REW button. Equalizer - While playing music, press and hold VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second to switch between EQs (Bass Boost(Default) g Normal g Treble Boost). The headset will play an audible alert. - EQ is not changed if your handset supports aptX codec and is enabled. - The bass coming from the speakers can vary as a result of the size of the Earbud that is being used. aptX - HBS-730 features aptX technology that ensures audio content transmitted over Bluetooth is instant and crystal-clear. - aptX is automatically enabled as long as the source device supports it. Volume Control - Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume. - There are eight levels of speaker volume in Hands-Free mode. - There are eight levels of speaker volume in Audio Streaming mode. Calling
Answering a Call - When there is an incoming call, the headset will ring and vibrate. - Briefly press the VOLUME DOWN button to stop vibration. - Briefly press the CALL button to answer the incoming call. Transferring a Call - If you make a call from the handset, the call will (depending on the phone settings) automatically transfer to the headset. If the call is not automatically transferred, you can manually transfer the call to, or from, the headset by pressing and holding VOLUME UP button for 3 seconds on the HBS-730 (handset and headset must be paired). Voice Dialing - Briefly press the CALL button to activate Voice Command. For best results, record the voice dialing tag through your headset.
ENG
How to Use NOTE: If your handset does not support voice dialing, this action may activate Last Number Redial. Last Number Redial - Press and hold the CALL button for 1 second to activate Last Number Redial. The headset will beep and then call the last number dialed. Ending a Call - Briefly press the CALL button. Call Waiting - Answer a second call without hanging up the first call by pressing the CALL button for 1 second. Press the CALL button for 1 second to return to the original call. - Briefly press the CALL button to terminate both calls at once. Rejecting a Call - Activate call reject by pressing the CALL button for 1 second when the handset rings. * These functions may only be used if your handset supports them. For further information about using these features, please consult your handsets user manual. Mic Mute - Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second to mute/unmute the Mic during conversation. SMS Reader The HBS-730 Bluetooth headset supports SMS reading on Android TM based devices. In Google Play Store search for the LG BT Reader application and install on your device to use this function. * The 2D barcode shown below helps you download the LG BT Reader application from Google Play Store. Google Play is a trademark of Google, Inc.
Summary of Button Functions
Function
Action
ENG
Power off Power on Talking Talking
Transferring a call
Talking
Answering a call Stop incoming call vibration alerting Ending a call Call waiting Last number redial Voice dialing (handset must support) Call reject
Ringing
Slide the power switch to the ON side.
Slide the power switch to the OFF side. Briefly press the VOLUME UP button. Briefly press the VOLUME DOWN button. Press and hold VOLUME UP button for 3 seconds. Briefly press the CALL button.
Ringing
Briefly press the VOLUME DOWN button.
Talking Talking Idle
Briefly press the CALL button.
Press the CALL button for 1 second. Press the CALL button for 1 second.
Idle
Briefly press the CALL button.
Ringing
Mic mute on/off
Talking
Press the CALL button for 1 second.
Press and hold VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second. Press the CALL button and slide the power switch to the ON side at the same time for 4 seconds. Press the VOLUME DOWN button for 1 second. Briefly press the PLAY/PAUSE/STOP button. Briefly press the PLAY/PAUSE/STOP button. Press and hold the PLAY/PAUSE/STOP button for 1 second. Briefly press the FF button. Briefly press the REW button. Press and hold the FF button. Press and hold the REW button. Press and hold VOLUME UP and VOLUME DOWN buttons simultaneously for 1 second.
Pairing mode (Manual) Battery status check Play Pause
Action The blue LED light flickers 4 times. The blue LED light flickers 4 times and then turns off.
ENG
LED Indication Function
The blue LED light stays on.
The blue LED light flickers 2 times every 5 seconds. The blue LED light flickers 2 times every 5 seconds. The red LED stays on. LED turns off.
Troubleshooting Issue Does not turn on Unable to communicate with the LG Bluetooth Headset HBS-730
Unable to pair the
HBS-730 with the Bluetooth device
Possible problem
Resolution
Check whether the battery of
Charge the battery. the HBS-730 is fully charged. Check whether the handset Determine whether your handset supports the headset or supports the headset or handshands-free Bluetooth profiles. free Bluetooth profiles. Check whether the battery of the HBS-730 is low.
Charge the battery.
Check and make sure the
headset is on.
Slide the power switch to the ON
position to turn on the headset.
Check and make sure the
headset is placed in pairing mode.
With the power off, press the
CALL button and slide the power switch to the ON side at the same time for 1 second to manually place the headset in pairing mode.
Low sound (speaker) Check the speaker volume.
lncrease the volume level.
11
Specification Item
Description
ENG
Bluetooth specification
3.0 (Headset / Hands-Free / A2DP Profiles)
Battery
Battery 3.7V / 195mAh Li-Polymer
Talk Time
Up to 10Hrs
Music play time
Up to 10 Hrs
Standby time
Up to 500Hrs
Charging time
< 2.0Hrs
Operation temperature
14F ~ 140F (-10C ~ 60C)
Dimension / weight
135.6mm(W) X 167.3mm(L) X 16.9mm(T) / 32g
Precautions Do not drop the device. Do not modify, repair, or disassemble. Do not expose directly to water, alcohol, benzene, etc for cleaning. Do not expose directly to flammables. Do not place or keep the device near flammables. Keep the device away from excessive humidity and dust. Do not place heavy objects on the device. Only charge the headset with an original LG charger, otherwise it may be damaged.
12
Changes or modifications not expressly approved by the party responsible for
compliance could void the users authority to operate the equipment. There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. The neck strap is made of a shape memory alloy. However, bending the neck strap repeatedly is not recommended.
ENG
Declaration of Confirmation FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void users authority to operate the device. CE NOTICE TO USERS: Hereby, LG Electronics Inc. declares that this HBS-730 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
1177
FCC ID: BEJHBS730
Additional Information 1. Radio frequency exposure This Bluetooth Stereo Headset HBS-730, is a radio transmitter and receiver. When in operation it communicates with a Bluetooth equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2.4 to 2.4835 GHz. The output power of the radio transmitter is low (0.001 watts). Your Bluetooth Headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used any compatible LG Electronics mobile phone. 13
Additional Information
ENG
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. 3.Emergency calls IMPORTANT! This Bluetooth headset and the electronic device connected to the headset operate using radio signals, mobile and landline networks as well as user - programmed functions, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any electronic device for essential communications (e.g. medical emergencies). Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be switched on and in a service area with adequate mobile signal strength. Emergency calls may not be possible on all mobile phone networks or when certain network services and/or phone features are in use. Check with your local service provider. 4. Battery information A rechargeable battery has a long service life if treated properly. A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +60C(+140F) or under -20C(-4F). For maximum battery capacity, use the battery at room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between +10C(+50F) and +45C (+113F). For your safety, do not remove the battery incorperated in the product. If you need to replace the battery, take it to the nearest authorised LG Electronics service point or dealer for assistance. 5. Recycling the battery in your Bluetooth headset The battery in your Bluetooth Headset must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner who removes the battery will dispose of it according to local regulations.
14
ENG
Additional Information 6. Conditions - The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer. - If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics. - This Warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God or damage resulting from liquid. - This warranty does not cover product failures due to improper repair installations, modifications or service performed by a non- LG Electronics authorised person. Tampering with any of the seals on the product will void the warranty. - THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumers statutory rights under applicable national legislation in force, nor the consumers rights against the dealer arising from their sales/purchase contract.
15
Limited Warranty
ENG
Subject to the conditions of this Limited Warranty, LG Electronics warrants this
product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact centre to get further information.
Important Safety Information
Avoiding hearing damage Permanent hearing loss may occur if you use your headset at a high volume. Set the volume to a safe level. Over time you can become accustomed to a higher volume that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected. Hearing experts suggest that to protect your hearing: Limit the amount of time you use the headset at high volume. Avoid turning up the volume to block out noisy surroundings. Turn the volume down if you cant hear people speaking near you. Using Headsets safely Use of headsets to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive whilst driving. Stop using this device if you find it disruptive or distracting whilst operating any type of vehicle or performing any other activity that requires your full attention.
16
MEMO
MEMO
Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc
Iphone 14 User Guide: A Complete Step by Step Picture Manual for Beginners and Seniors (The Most Comprehensive and Intuitive Guide on How to Use Your New Iphone 14 With Tips and Tricks)
Iphone 14 User Guide: A Complete Step by Step Picture Manual for Beginners and Seniors (The Most Comprehensive and Intuitive Guide on How to Use Your New Iphone 14 With Tips and Tricks)
