Project Inspector: Requirements

Project Inspector
Requirements:
18 Months of Construction Technical Experience
AND
Associate Degree in:
Civil Engineering Technology
OR
Associate Degree in:
Construction Engineering Technology
OR
NICET Highway Construction Level II
AND
ACI Concrete Field Testing Technician, Grade 1
AND
Ohio Level I Aggregate Technician
AND
ODOT Flexible Pavement Training
How to get training/Certification:
NICET Highway Construction Level II

(in lieu of Associate Degree)
National Institute for Certification in Engineering Technologies
NICET has established the following criteria for certification in Highway
Construction:
Sufficient appropriate work experience

o
Work History Form - a detailed description of responsibilities and job

tasks for each position held
Successful performance on a written exam based on job tasks
Supervisor verification of job task competency

o
Work Element Verification Form - supervisor attests that he or she has

witnessed performance of that work element's tasks repeatedly and
competently
A personal recommendation is required at Levels III and IV
NICET Highway Construction Level II - technicians perform routine tasks under

general daily supervision (at least two years relevant experience) must pass 6
general and 6 special Level I work element tests and 6 general and 7 special Level II
tests
How long will it take and how much will it cost?
If you decided in April, May or June you wanted get certified youve missed the cut
off for Cycle 2 (cut off cycle 2 will be March 30) and will have to get into Cycle 3.
There are 5 locations in Ohio to take the test. These are offered over about a 1
month period. To get into Cycle 3 the deadline to submit your work experience and
supervisor information would be sometime between June 15 and July 20 for tests
held between Aug 3 and September 7. It takes 2 weeks to get the scores back and
then 90 days after test for them to review all the experience information. So a
person starting today best case would be certified by early November. Best case 6
months worst case 8 months. Cost would be $416 ($260 for test and $156 for
review of experience documents).
Testing Process
Currently the tests are paper and pencil format but are being transitioned to
computer based testing. The tests are made up of multiple-choice questions,
designed to be answered with little difficulty by those who regularly perform the
tasks within the covered areas. The tests will be custom-made according to the
work elements requested. The work element descriptions in the program detail
manual give a good idea of what material will be tested in each work element. The
examination is open-book; standards, references, and calculators (computers are
not allowed) are allowed. The time limit will be based on the specific questions. The
maximum time allowed (for a maximum of 34 work element tests) will be 420
minutes with 1 hour for lunch.
Exam test centers and exam dates for 2013 in Ohio are shown at:
http://www.nicet.org/candidates/scheduling.cfm. The flat fee for up to 34 work
element tests is $260. In specific instances testing can be offered with a reduced
fee for mass testing.
Applications must be received 7 weeks prior to the testing date. Applicants will be
sent confirmation letters 30 days prior to the testing date. Applicants will receive
their scores about 2 weeks after the exam. If examination requirements are met
NICET will then evaluate work history and performance verifications. About 90 days
after the test applicant will receive either a NICET certificate and approval
letter/wallet card or a letter explaining criteria that remains unmet. The applicant is
then given a chance to submit the missing criteria.
The fee for review of the work history and performance verification runs from $78
dollars to $354 depending on the current certification level and the certification
level being requested. That fee includes one subsequent review of additional
information if necessary.
Certifications are good for three years. At the end of each 3 year period an applicant
must document 90 points of continuing professional development activities (2
points for each month worked up to 72 hours and various options of training,
participation in professional programs, etc.) The fee to recertify is $172 for a single
certification. Second and subsequent certifications are an additional $47 for another
3 year period.
Complete NICET Information can be found at:

http://www.nicet.org and see Programs then choose
Transportation: Highway Construction
ACI Concrete Field Testing Technician, Grade I
(required for all)
American Concrete Institute
Required Certification:
ACI Concrete Field Testing Technician Grade I
ACI Sponsored Associations: Ohio Concrete / Ohio Ready Mixed Concrete Association (ORMCA)
www.ohioconcrete.org
[email protected] Phone: 614-891-0210 Amy
ACI CONCRETE FIELD TESTING TECHNICIAN GRADE I
(2-DAYS) 6 CPD HRS.
The ACI Concrete Field Testing Technician Grade I course will benefit all personnel involved in testing
fresh concrete. ASTM C94, ACI 301 and C31 all require that technicians making and curing concrete test
specimens for acceptance be certified ACI Concrete Field Testing Technicians. A working knowledge of
the following ASTM Standards is required for this certification program:
C-172 Sampling Freshly Mixed Concrete;
C-143 Slump of Hydraulic Cement Concrete;
C-138 Density (Unit Weight), Yield, & Air Content (Gravimetric) of Concrete;
C-231 Air Content of Freshly Mixed Concrete by Pressure Method;
C-173 Air Content of Freshly Mixed Concrete by Volumetric Method;
C-31 Making and Curing Concrete Test Specimens in the Field;
C-1064 Temperature of Freshly Mixed Portland Cement Concrete.
Ohio Concrete Professional Engineers conduct the one-day review. The written and performance
examinations are administered by a Professional Engineer and graded by the American Concrete Institute
(ACI).
Technicians successfully completing both the written and performance examinations will receive a
certificate and wallet card from ACI certifying them as an ACI Concrete Field Testing Technician - Grade I
(certification expires in 5 years).
ACI requires successful completion of both the performance and written examinations, for individuals
desiring recertification. Individuals may register for Exam Only, however it is recommended that they
register for the Accelerated Course, to review the current standards covered on the exam.
ACI Concrete Field Testing Technician - Grade I exam is now reimbursable (up to $500) to Veterans
through the GI Bill. To view the VA's recognized exam list, including the Concrete Field Testing Technician
Grade I listing, click the following link: http://inquiry.vba.va.gov/weamspub/buildSearchNE.do Veterans
wanting reimbursement for the ACI Concrete Field Testing Technician Grade I exam through the GI Bill
must let Ohio Concrete know upon registering.
Time: 1 day for the Review; 1 day for the Exam (Written and Practical)
Cost Structure:
Member
Affiliate
NonMember
Review &
$ 380
$ 490
$ 610
Exam
Exam
$ 235
$ 300
$ 370
Only
Book
$ 75
$ 75
$ 75
Ohio Northeast Chapter ACI
Phone: 440-623-0285 Carri Wolverton
Time: 1day for the Review; 1 day for the Exam (Saturdays)
Certification is good for 5 years
Make sure that you specify the certification as Concrete Field Testing Technician Grade I
there is a Concrete Technician certification that is different than what we typically require.
ORMCA is the sponsoring group for most of Ohio, but the NE chapter of ACI has elected to
provide training in their area. Each chapter has the first right of refusal to provide this
training/certification.
Ohio Level I Aggregate Technician (required for all)

Ohio Aggregates and Industrial Minerals Association
Required Certification: Ohio Level 1 Aggregate Technician
For information regarding the Level 1 training see the following link:
http://www.oaima.org/aws/OAIMA/asset_manager/get_file/13351/level_1_2_3_agg_tech_trainin
g_summary.pdf
Entitled: Stockpile Management, Recommended Practice for Building and Maintaining Quality
Stockpiles & Proper Load-Out, Recovery and Sampling Techniques.
Stockpile Management is the key to our success as quality aggregate producers. It doesnt matter
what we put in a stockpile if we dont use the proper techniques to recover the material from the
stockpile. Additionally, proper stockpile construction and sampling are factors that definitely
impact our daily operations. These areas are where the producer can most dramatically and quickly
impact the quality of his operation.
What is covered? Topics covered in this one-day course include: Methods of Stockpiling,
Segregation of Aggregates, Stockpile Recovery Techniques (Such as Load-out), Sources of
Variation, Importance of Sampling and Sampling Techniques and Methods.
Who Should Attend? This course is suited for all personnel involved in your aggregate operation
but especially front-line personnel such as loader-operators, plant operators and quality control
technicians.
Prerequisites? There are no prerequisites for Level I Aggregate Technician Training. Experience
in the field is helpful but not necessary. Class participation is highly encouraged to share real-life
experiences when dealing with the topics covered.
Re-Qualification: 5 years
Classroom time: 8 hours
NOTE: Currently there are 3,036 people certified as Level I Aggregate Technician, 1,253
people certified as Level II Aggregate Technician and 240 people certified as a Level III
Aggregate Technician see http://www.oaima.org/aws/OAIMA/pt/sp/qc click Technicians List for
names and association
Contact for certification:
OAIMA
Telephone:1-800-647-6257 or 614-428-7954
162 N. Hamilton Rd.
Fax: 614-428-7919
Gahanna, OH 43230
e-mail: [email protected]
Currently courses are full and they are working from a waiting list.
Course Fee includes: notebook, certificate, hard hat sticker and lunch.
OAIMA Member registration fee: $ 125.00
OAIMA Member Registration fee: $ 135.00
Non-member registration fee:
$ 250.00
Non-member registration fee:
$ 260.00
ODOT Flexible Pavement Testing (required for all)

Offered only by ODOT see Office of Construction Managements web page for further information
http://www.dot.state.oh.us/Divisions/ConstructionMgt/Pages/default.aspx

Project Inspector: Requirements

Uploaded by

Copyright:

Available Formats

Project Inspector: Requirements

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Project Inspector: Requirements

Uploaded by

Copyright:

Available Formats

Project Inspector

NICET Highway Construction Level II

Sufficient appropriate work experience

Work History Form - a detailed description of responsibilities and job

Successful performance on a written exam based on job tasks

Supervisor verification of job task competency

Work Element Verification Form - supervisor attests that he or she has

A personal recommendation is required at Levels III and IV

NICET Highway Construction Level II - technicians perform routine tasks under

Complete NICET Information can be found at:

(2-DAYS) 6 CPD HRS.

Ohio Level I Aggregate Technician (required for all)

ODOT Flexible Pavement Testing (required for all)

You might also like