Network Engineer Interview Questions

Network engineer interview questions
OSPF
Describe OSPF in your own words.

OSPF areas, the purpose of having each of them
Types of OSPF LSA, the purpose of each LSA type
What exact LSA type you can see in different areas
How OSPF establishes neighboor relation, what the stages are
If OSPF router is stucked in each stage what the problem is and how
to troubleshoot it
OSPF hierarchy in the single or multi areas. Cool OSPF behavior in
broadcast and nonbroadcast
Draw the diagram of typical OSPF network and explain generally how
it works, DR, BDR, election, ASBR, ABR, route redistribution and
summarization
STP
How it works and the purpose
Diff types (SSTP, MSTP, RSTP) Cisco - PVST/PVST+
root election
Diff. port stages and timing for convergence
Draw the typical diagram and explain how diff types of STP work
What ports are blocking or forwarding
How it works if there are topology changes
ACLs
What are they
Diff types
Write an example if you want to allow and to deny
Well-known port numbers (DNS - 53 and etc)
QOS
What is that
What is the diff b/w L2 and L3 QoS
How it works
Network:
Draw the typical network diagram you have to deal with
PRAKASH
explain how it works

What part of it you are responsible
firewall, what is that, how it works, how it is diff from ACLs
What problems with the network you had had and how you solved it.
What are the ways to troubleshoot the network, techniques,
commands
network security, ways to achieve it
Switching:
VLANs
STP
How a L2 switch works with broadcast, unicast, multicast,
known/unknown traffic
VRRP, GLBP
port monitoring and mirroring
L3 switch, how it works
PIM sparse and dense modes
^Back to Top
Windows admin interview questions
1.
2.
3.
4.
5.
Describe how the DHCP lease is obtained. Its a four-step process

consisting of (a) IP request, (b) IP offer, IP selection and (d)
acknowledgement.
I cant seem to access the Internet, dont have any access to the
corporate network and on ipconfig my address is 169.254.*.*. What
happened? The 169.254.*.* netmask is assigned to Windows machines
running 98/2000/XP if the DHCP server is not available. The name for the
technology is APIPA (Automatic Private Internet Protocol Addressing).
Weve installed a new Windows-based DHCP server, however, the
users do not seem to be getting DHCP leases off of it. The server must be
authorized first with the Active Directory.
How can you force the client to give up the dhcp lease if you have
access to the client PC? ipconfig /release
What authentication options do Windows 2000 Servers have for
remote clients? PAP, SPAP, CHAP, MS-CHAP and EAP.
PRAKASH
6.
What are the networking protocol options for the Windows clients
if for some reason you do not want to use TCP/IP? NWLink (Novell),
NetBEUI, AppleTalk (Apple).
7.
What is data link layer in the OSI reference model responsible
for? Data link layer is located above the physical layer, but below the
network layer. Taking raw data bits and packaging them into frames. The
network layer will be responsible for addressing the frames, while the
physical layer is reponsible for retrieving and sending raw data bits.
8.
What is binding order? The order by which the network protocols
are used for client-server communications. The most frequently used
protocols should be at the top.
9.
How do cryptography-based keys ensure the validity of data
transferred across the network? Each IP packet is assigned a checksum,
so if the checksums do not match on both receiving and transmitting ends,
the data was modified or corrupted.
10.
Should we deploy IPSEC-based security or certificate-based
security? They are really two different technologies. IPSec secures the
TCP/IP communication and protects the integrity of the packets. Certificatebased security ensures the validity of authenticated clients and servers.
11.
What is LMHOSTS file? Its a file stored on a host machine that is
used to resolve NetBIOS to specific IP addresses.
12.
Whats the difference between forward lookup and reverse lookup
in DNS? Forward lookup is name-to-address, the reverse lookup is addressto-name.
13.
How can you recover a file encrypted using EFS? Use the domain
recovery agent.
^Back to Top
Read more at TechInterviews.com
Network engineer/architect interview questions
1.
Explain how traceroute, ping, and tcpdump work and what they are
used for?
2.
Describe a case where you have used these tools to troubleshoot.
3.
What is the last major networking problem you troubleshot and solved
on your own in the last year?
PRAKASH
4.
What LAN analyzer tools are you familiar with and describe how you
use them to troubleshoot and on what media and network types.
5.
Explain the contents of a routing table (default route, next hop, etc.)
6.
What routing protocols have you configured?
7.
Describe the commands to set up a route.
8.
What routing problems have you troubleshot?
9.
How do you display a routing table on a Cisco? On a host?
10.
How do you use a routing table and for what?
11.
What is a route flap?
12.
What is a metric?
13.
When do you use BGP, IGRP, OSPF, Static Routes?
14.
What do you see as current networking security issues (e.g. NFS
mounting, spoofing, one time passwords, etc.)?
15.
Describe a routing filter and what it does.
16.
Describe an access list and what it does.
17.
What is a network management system?
18.
Describe how SNMP works.
19.
Describe the working environment you are currently in, e.g. frequent
interruptions, frequent priority shifting, team or individual.
20.
What do you use to write documentation? Editor? Mail reader?
21.
What platform (s) do you currently work on at your desk?
22.
How do you manage multiple concurrent high level projects?
23.
Describe a recent short term stressful situation and how you managed
it.
24.
How do you manage a long term demanding stressful work
environment?
25.
Have you worked in an assignment based environment, e.g. work
request/trouble ticket system, and if so, describe that environment.
26.
Describe what network statistics or measurement tools you are
familiar with and how you have used them.
27.
Describe what a VPN is and how it works.
28.
Describe how VoIP works.
29.
Describe methods of QoS.
30.
How does ToS bit work?
^Back to Top
CCNA/Cisco admin interview questions
PRAKASH
1.
1.
2.
3.
4.
5.
2.
1.
2.
3.
4.
5.
3.
1.
2.
3.
4.
5.
4.
1.
2.
3.
4.
5.
1.
2.
3.
You need to retrieve a file from the file server for your word
processing application, which layer of the OSI model is responsible for
this function?
Presentation layer
Application layer
Session layer
Transport layer
Datalink layer
You are working in a word processing program, which is run from
the file server. Your data comes back to you in an unintelligible manner.
Which layer of the OSI model would you investigate?
Application layer
Presentation layer
Session layer
Network layer
Datalink layer
The IEEE subdivided the datalink layer to provide for
environments that need connectionless or connection-oriented services.
What are the two layers called?
Physical
MAC
LLC
Session
IP
You are working with graphic translations. Which layer of the
OSI model is responsible for code formatting and conversion and
graphic standards.
Network layer
Session layer
Transport layer
Presentation layer
Which is the best definition of encapsulation?
Each layer of the OSI model uses encryption to put the PDU
from the upper layer into its data field. It adds header and trailer information
that is available to its counterpart on the system that will receive it.
Data always needs to be tunneled to its destination so
encapsulation must be used.
Each layer of the OSI model uses compression to put the PDU
PRAKASH
4.
Each layer of the OSI model uses encapsulation to put the PDU
6.
Routers can be configured using several sources. Select which of
the following sources can be used.
1.
Console Port
2.
Virtual Terminals
3.
TFTP Server
4.
Floppy disk
5.
Removable media
7.
Which memory component on a Cisco router contains the
dynamic system configuration?
1.
ROM
2.
NVRAM
3.
Flash
4.
RAM/DRAM
8.
Which combination of keys will allow you to view the previous
commands that you typed at the router?
1.
ESC-P
2.
Ctrl-P
3.
Shift-P
4.
Alt-P
9.
Which commands will display the active configuration
parameters?
1.
show running-config
2.
write term
3.
show version
4.
display term
10.
You are configuring a router, which prompt tells you that you are
in the privileged EXEC mode?
1.
@
2.
>
3.
!
4.
:
5.
#
11.
What does the command IP name-server 255.255.255.255
accomplish?
1.
It disables domain name lookup.
2.
It sets the domain name lookup to be a local broadcast.
3.
This is an illegal command.
PRAKASH
4.
The command is now defunct and has been replaced by IP

server-name ip any
12.
The following selections show the command prompt and the
configuration of the IP network mask. Which two are correct?
1.
Router(config-if)#netmask-format { bitcount | decimal |
hexadecimal }
2.
Router#term IP netmask-format { bitcount | decimal |
hexadecimal }
3.
Router(config-if)#IP netmask-format { bitcount | decimal |
hexadecimal }
4.
Router#ip netmask-format { bitcount | decimal | hexadecimal }
13.
Which layer is responsible for flow control with sliding windows
and reliability with sequence numbers and acknowledgments?
1.
Transport
2.
Application
3.
Internet
4.
Network Interface
14.
Which processes does TCP, but not UDP, use?
1.
Windowing
2.
Acknowledgements
3.
Source Port
4.
Destination Port
15.
Select which protocols use distance vector routing?
1.
OSPF
2.
RIP
3.
IGRP
4.
PPP
^Back to Top
Networking and Unix interview questions
What is UTP?
PRAKASH
UTP Unshielded twisted pair 10BASE-T is the preferred Ethernet

medium of the 90s. It is based on a star topology and provides a number of
advantages over coaxial media:
It uses inexpensive, readily available copper phone wire. UTP wire is much
easier to install and debug than coax. UTP uses RG-45 connectors, which are
cheap and reliable.
What is a router? What is a gateway?
Routers are machines that direct a packet through the maze of networks that
stand between its source and destination. Normally a router is used for
internal networks while a gateway acts a door for the packet to reach the
outside of the internal network
What is Semaphore? What is deadlock?
Semaphore is a synchronization tool to solve critical-section problem, can be
used to control access to the critical section for a process or thread. The main
disadvantage (same of mutual-exclusion) is require busy waiting. It will
create problems in a multiprogramming system, where a single CPU is
shared among many processes.
Busy waiting wastes CPU cycles.
Deadlock is a situation when two or more processes are waiting indefinitely
for an event that can be caused by only one of the waiting processes. The
implementation of a semaphore with a waiting queue may result in this
situation.
What is Virtual Memory?
Virtual memory is a technique that allows the execution of processes that
may not be completely in memory. A separation of user logical memory
from physical memory allows an extremely large virtual memory to be
provided for programmers when only a smaller physical memory is
available. It is commonly implemented by demand paging. A demand paging
system is similar to a paging system with swapping. Processes reside on
secondary memory (which is usually a disk). When we want to execute a
process, we swap it into memory.
PRAKASH
Explain the layered aspect of a UNIX system. What are the layers?
What does it mean to say they are layers?
A UNIX system has essentially three main layers:
. The hardware
. The operating system kernel
. The user-level programs
The kernel hides the systems hardware underneath an abstract, high-level
programming interface. It is responsible for implementing many of the
facilities that users and user-level programs take for granted.
The kernel assembles all of the following UNIX concepts from lower-level
hardware features:
. Processes (time-sharing, protected address space)
. Signals and semaphores
. Virtual Memory (swapping, paging, and mapping)
. The filesystem (files, directories, namespace)
. Pipes and network connections (inter-process communication)
PRAKASH

Network Engineer Interview Questions

Uploaded by

Copyright:

Available Formats

Network Engineer Interview Questions

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Network Engineer Interview Questions

Uploaded by

Copyright:

Available Formats

What are the main components of an OSPF network and their purposes?

How does STP work and what are its main components?

Network engineer interview questions

Describe OSPF in your own words.

explain how it works

Describe how the DHCP lease is obtained. Its a four-step process

The command is now defunct and has been replaced by IP

UTP Unshielded twisted pair 10BASE-T is the preferred Ethernet

You might also like