Scribd
Upload
279 views1 page

Realization of FIR and IIR Filter

This document discusses different methods for realizing FIR and IIR filters, including: 1) Direct form-I and direct form-II realizations of an IIR transfer function. 2) Parallel and cascade realizations of a fractionally delayed system function. 3) Direct form and cascade form realizations of an FIR filter system function. 4) FIR linear phase and cascade realizations of another system function. 5) Determining FIR filter coefficients for a direct form structure from a three stage lattice filter. 6) Determining lattice coefficients corresponding to an FIR filter system function. 7) Obtaining a lattice structure for another IIR system function.

Uploaded by

Mohit Goel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
279 views1 page

Realization of FIR and IIR Filter

This document discusses different methods for realizing FIR and IIR filters, including: 1) Direct form-I and direct form-II realizations of an IIR transfer function. 2) Parallel and cascade realizations of a fractionally delayed system function. 3) Direct form and cascade form realizations of an FIR filter system function. 4) FIR linear phase and cascade realizations of another system function. 5) Determining FIR filter coefficients for a direct form structure from a three stage lattice filter. 6) Determining lattice coefficients corresponding to an FIR filter system function. 7) Obtaining a lattice structure for another IIR system function.

Uploaded by

Mohit Goel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Realization of FIR and IIR filter

1. Make direct form-I and direct form-II for IIR transfer function
H(z) =

0.28 z 2 + .319 z + .04


0.5z 3 + .3z 2 + .17 z 0.2

2. Draw parallel and cascade realization of

(1 z 1 ) 3
H(z) =
1 1 1 1
1 z 1 z
2 8
3. Obtain direct form and cascade form realization of FIR filter

H(z) = 1

1 1 3 2 1 1 1 2
z + z 1 z z
4
8
2
8

4. Obtain FIR linear phase and cascade realization of system function

1
1

H ( z ) = 1 + z 1 + z 2 1 + z 1 + z 2
2
4

5. Given a three stage lattice filter with coefficient K1= 1/4 , K2= 1/2, K3= 1/3. Determine FIR
filter coefficient for direct form structure.
6. Determine lattice coefficients corresponding to FIR filter with system function
H(z) = 1 +

13 1 5 2 1 3
z + z + z
24
8
3

7. Obtain lattice structure for H(z) =

1
1 0.8 z + 0.49 z 2 0.57 z 3
1

Mohit Goel

You might also like