Scribd Logo
Upload

Welcome to Scribd!

  • 114 views

    Microcontroller Based Electronic Voting Machine: 1. Objective

    Uploaded by

    sagrv
    This document describes an electronic voting machine that uses a PIC microcontroller. The voting machine allows for voting by pressing buttons corresponding to candidates and displays results on an LCD screen. It aims to provide a low-cost and effective voting system that avoids multiple voting and provides instant results. Key features include being economical, requiring less manpower, and providing time-efficient and convenient voting and counting.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Microcontroller Based Electronic Voting Machine: 1. Objective

    Uploaded by

    sagrv
    114 views4 pages
    This document describes an electronic voting machine that uses a PIC microcontroller. The voting machine allows for voting by pressing buttons corresponding to candidates and displays results on an LCD screen. It aims to provide a low-cost and effective voting system that avoids multiple voting and provides instant results. Key features include being economical, requiring less manpower, and providing time-efficient and convenient voting and counting.

    Original Title

    Synopsis uc

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes an electronic voting machine that uses a PIC microcontroller. The voting machine allows for voting by pressing buttons corresponding to candidates and displays results on an LCD screen. It aims to provide a low-cost and effective voting system that avoids multiple voting and provides instant results. Key features include being economical, requiring less manpower, and providing time-efficient and convenient voting and counting.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    114 views4 pages

    Microcontroller Based Electronic Voting Machine: 1. Objective

    Uploaded by

    sagrv
    This document describes an electronic voting machine that uses a PIC microcontroller. The voting machine allows for voting by pressing buttons corresponding to candidates and displays results on an LCD screen. It aims to provide a low-cost and effective voting system that avoids multiple voting and provides instant results. Key features include being economical, requiring less manpower, and providing time-efficient and convenient voting and counting.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Microcontroller based

    Electronic Voting Machine


    1. OBJECTIVE:
    To implement a very low cost and effective voting machine using PIC microcontroller.
    This voting system avoids multiple polling by a single user and also provides instantaneous
    results which are displayed on the LCD connected to the microcontroller.

    2. FEATURES:
    1. It is economical
    2. Less manpower required
    3. Time conscious, as less time required for voting & counting
    4. Avoids invalid voting
    5. Saves transportation cost due to its compact size
    6. Convenient on the part of voter
    7. easy transportation, storage, and maintenance
    8. easy and accurate counting without any mischief at the counting centre
    9. Eco friendly

    3. BLOCK DIAGRAM:

    4.WORKING OF EACH BLOCK:

    1) Power Supply: This section is responsible for providing required power for the
    working of entire project. This section consist of 12V step-down transformer, bridge
    rectifier with capacitor filter, 7805 voltage regulator .

    2) PUSH BUTTONS: We have 6 keys/buttons on the keypad(4-CANDIDATES,2OFFICERS). Thus it has one key specified for one candidate. This block is used in
    both voting and counting mode, in voting mode key of respective candidate is
    pressed, the corresponding signal is sensed by micro controller. In counting mode
    this keypad is used to check the votes of respective candidate. The key given for
    candidate is pressed and micro controller senses the corresponding signal.
    3) Micro controller: Micro controller senses the signal given from switches and
    decides the mode of operation in voting mode it increments the data for
    corresponding key i.e. respective candidate as well as it sends signal to display block
    to indicate one key is pressed. In counting mode micro controllers fetches data from
    memory location and send it to display devices.
    4) LCD display: Liquid Crystal Display which is commonly known as LCD is an
    Alphanumeric Display it means that it can display Alphabets, Numbers as well as
    special symbols thus LCD is a user friendly Display device which can be used for
    displaying various messages unlike seven segment display which can display only
    numbers and some of the alphabets. The only disadvantage of LCD over seven
    segment is that seven segment is robust display and be visualized from a longer
    distance as compared to LCD. Here a 16 x 2 Alphanumeric Display is used which
    means it can display two lines with maximum of 16 characters in one line.

    5.Advantages:
    1. It is economical
    2. Less manpower required
    3. Time conscious, as less time required for voting & counting
    4. Avoids invalid voting
    5. Saves transportation cost due to its compact size
    6. Convenient on the part of voter.
    This could be used for voting purpose at any required place

    6.Application:
    1. This could be used for voting purpose at any required place.

    2. It is used in general elections for choosing candidates to represent people at various


    stages.
    3. It can be used in school ,college student union elections.
    4. It can be used to find the general opinion of people on various issues.
    5. Anywhere where majority opinion is to be found out.

    7.Future Scope:
    1. Timer could be included, which could automatically end the voting after specific
    duration of time.
    2. Biomatric Verification of voters, so that automatically it can be insured that one
    person is voting once.
    3. It can be made more interactive by adding sound effect (Speech) to it.
    4. EEPROM can be used to store data permanently.
    5. If we make more than one EVM, each to be used at differant locations and final
    result will be addition of result of all, we could think of connecting them to
    communicate with each other and final result can be shown on one of the LCD.

    You might also like