Scribd
Upload
36 views

Alumina Transfer System

This document contains 6 chapters that describe various systems used at an aluminum production facility. Chapter 2 discusses the alumina transfer system that moves alumina powder from silos to the production process. Chapter 3 focuses on compressors, their applications and classifications. Chapter 4 is about cranes used at the facility, including overhead cranes and their main parts. Chapter 5 covers the dry scrubbing system that cleans gases from the production process. And Chapter 6 examines the crust breaker equipment used to break up hardened materials.

Uploaded by

Er Raghvendra Singh
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
36 views

Alumina Transfer System

This document contains 6 chapters that describe various systems used at an aluminum production facility. Chapter 2 discusses the alumina transfer system that moves alumina powder from silos to the production process. Chapter 3 focuses on compressors, their applications and classifications. Chapter 4 is about cranes used at the facility, including overhead cranes and their main parts. Chapter 5 covers the dry scrubbing system that cleans gases from the production process. And Chapter 6 examines the crust breaker equipment used to break up hardened materials.

Uploaded by

Er Raghvendra Singh
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

CHAPTER 1

1.1 Introduction
1.2 Hindalco today

CHAPTER 2: ALUMINA TRANSFER SYSTEM


2.1 Alumina transfer to primary silo
2.2 Primary alumina handling
2.3 Alumina injection & reciprocating
2.4 Alumina transfer system
2.5 Fluoride adsorption
2.6 Factors affecting the pressure drop
2.7 Classification of Fans, Blowers and compressor
2.7.1 Fans
2.7.2 Centrifugal fans
2.7.3 Blowers
2.8 Specification of filter bags
2.9 Alumina properties

CHAPTER 3: COMPRESSOR
3.1 Introduction
3.2 Applications
3.3 Classification
3.4 Air flow in reciprocating compressor
3.5 Main parts of reciprocating compressor
3.6 Reciprocating compressor
3.6.1 Clearance for reciprocating compressor
3.7 Centrifugal compressor
3.8 Principle
3.9 Description
3.10 Compressor part
3.11 Compressor efficiency
3.11.1 Factor affecting the compressor efficiency
3.12 Air conservation / efficient air system
3.13 Unloading power of compressor in compression of full load

CHAPTER 4: CRANE
4.1 Types of crane
4.1.1 E.O.T. Crane
4.2 Main parts of crane
4.2.1 According to bridge drive
4.3 Bridge units

4.3.1 Trolley unit


4.3.2 Hoist unit
4.3.3 Crane hook
4.4 Scope in Potroom
4.5 Advantages of E.O.T. crane
4.6 Problem in cranes
4.6.1 Cause of C.P.P. trouble
4.6.2 Cause of C/Shoe out
4.6.3 Cause of crane cross
4.6.4 Cause of bridge jamming
4.6.5 Cause of foot brake trouble
4.6.6 Cause of wire rope sparking
4.6.7 Cause of hook
4.6.8 Cause of hook jamming
4.6.9 Cause of wire rope broken
4.6.10 Cause of trolley derailment
4.7 Power supply in crane
4.7.1 Brakes
4.7.2 Pot room crane speed
4.7.3 Hoist max. lift
4.7.4 Wire rope construction
4.7.5 Wire rope material
4.8 Crane numbering and location details
4.9 Bridge span
4.9.1 Trolley span
4.10 General checking in P.M.

CHAPTER 5: DRY SCRUBBING SYSTEM


5.1 Need for DSS/FTP
5.2 Gas ducting and fan system
5.3 Cleaning of the filter bags
5.4 Bag cleaning parameter
5.5 Pulse system
5.6 Bag house

CHAPTER 6: CRUST BREAKER


6.1 Equipment description
6.2 Upper frame
6.3 Upper works
6.4 Lower works
6.5 Support bearing assembly
6.6 Hydraulic power unit
6.7 Crust breaker operation

CONCLUSION
REFRESNCES

You might also like