Scribd Logo
Upload

Welcome to Scribd!

  • 169 views

    Clarion Pi2384m

    Uploaded by

    jalvarez_385073
    This document provides service information for an Isuzu 6-disc CD changer model PI-2384M-A, including: - Specifications for dimensions, power requirements, and current draw. - Cautions for engineers performing repairs, including proper grounding procedures and avoiding static electricity when working with components. - An exploded view and parts list for the main sections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Clarion Pi2384m

    Uploaded by

    jalvarez_385073
    169 views3 pages
    This document provides service information for an Isuzu 6-disc CD changer model PI-2384M-A, including: - Specifications for dimensions, power requirements, and current draw. - Cautions for engineers performing repairs, including proper grounding procedures and avoiding static electricity when working with components. - An exploded view and parts list for the main sections.

    Original Description:

    CLARION

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides service information for an Isuzu 6-disc CD changer model PI-2384M-A, including: - Specifications for dimensions, power requirements, and current draw. - Cautions for engineers performing repairs, including proper grounding procedures and avoiding static electricity when working with components. - An exploded view and parts list for the main sections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    169 views3 pages

    Clarion Pi2384m

    Uploaded by

    jalvarez_385073
    This document provides service information for an Isuzu 6-disc CD changer model PI-2384M-A, including: - Specifications for dimensions, power requirements, and current draw. - Cautions for engineers performing repairs, including proper grounding procedures and avoiding static electricity when working with components. - An exploded view and parts list for the main sections.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Clarion Co., Ltd.

    Published by Service Dept.

    5-35-2, Hakusan, Bunkyouku, Tokyo, 112-8608 Japan


    Service Dept.- 50 kamitoda,Toda-shi,Saitama,335-8511 Japan Tel: 048-443-1111 FAX:048-433-6996

    298-5922-00 Jul.2001 P
    Printed in Japan

    Service Manual
    ISUZU Automobile Genuine
    6 Disc CD Changer

    Model

    PI-2384M-A

    (Genuine No.8-97254-539-2)

    ORIGINAL SERVICE MANUAL


    This additional service manual is designed to be used together with Model CDC655Tz/RDC655Tz
    Original model

    Manual No.

    CDC655Tz/RDC655Tz

    298-5754-00/-01

    SPECIFICATIONS
    Power supply:

    DC14.4V (10.8V to 15.6V)


    negative ground
    Current consumption: Less than 1A
    Back up current:
    Less than 3mA
    Dimensions(mm):
    225(W)x63(H)x173.5(D)
    Specification and design are subject to change without

    To engineers in charge of repair or

    inspection of our products.

    notice for further improvement.

    Before repair or inspection, make sure to follow


    the instructions so that customers and Engineers
    in charge of repair or inspection can avoid suffering any risk or injury.

    COMPONENTS
    PI-2384M-A
    Main unit

    For repair table shall use copper or conductive sheet


    (with impedance is lower than 1G)such as a sheet.
    Be sure to put on a wrist-strap for prevent electric
    static's.(with impedance lower than 100M) The strap
    works to drain away the static electricity build-up on the
    human body.
    And as static electricity build-up on clothes is not drained
    away, be careful and not your clothes to touch the pickup.
    Position of short soldering for pick-up protection position is different by model.
    Some units have two short soldering points.
    Always short LD circuit to open the short circuit and removes by soldering iron.

    NOTE
    We cannot supply PWB with component parts in prin-

    ciple. When a circuit on PWB has failure , please repair


    it by component parts base. Parts which are not mentioned in service manual are not supplied.
    Prevent damage caused by static electricity when repairing the pick-up.
    The pattern of the pick-up is short-circuiting for prevention.
    Remove the soldering with a solder iron whose insulation resistance is larger than 10M(DC500V) after complete connection to the main PWB

    -1-

    1. Use specified parts.


    The system uses parts with special safety features against
    fire and voltage. Use only parts with equivalent characteristics when replacing them.
    The use of unspecified parts shall be regarded as remodeling for which we shall not be liable. The onus of
    product liability (PL) shall not be our responsibility in cases
    where an accident or failure is as a result of unspecified
    parts being used.
    2. Place the parts and wiring back in their original positions
    after replacement or re-wiring.
    For proper circuit construction, use of insulation tubes,
    bonding, gaps to PWB, etc, is involved. The wiring con-

    PI-2384M-A

    3.

    4.

    5.

    6.

    nection and routing to the PWB are specially planned


    using clamps to keep away from heated and high voltage
    parts. Ensure that they are placed back in their original
    positions after repair or inspection.
    If extended damage is caused due to negligence during
    repair, the legal responsibility shall be with the repairing
    company.
    Check for safety after repair.
    Check that the screws, parts and wires are put back securely in their original position after repair. Ensure for
    safety reasons there is no possibility of secondary
    ploblems around the repaired spots.
    If extended damage is caused due to negligence of repair, the legal responsibility shall be with the repairing
    company.
    Caution in removal and making wiring connection to the
    parts for the automobile.
    Disconnect the battery terminal after turning the ignition
    key off. If wrong wiring connections are made with the
    battery connected, a short circuit and/or fire may occur.
    If extensive damage is caused due to negligence of repair, the legal responsibility shall be with the repairing
    company.
    Cautions regarding chips.
    Do not reuse removed chips even when no abnormality
    is observed in their appearance. Always replace them
    with new ones. (The chip parts include resistors, capacitors, diodes, transistors, etc). The negative pole of tantalum capacitors is highly susceptible to heat, so use special care when replacing them and check the operation
    afterwards.
    Cautions in handling flexible PWB
    Before working with a soldering iron, make sure that the
    iron tip temperature is around 270. Take care not to

    apply the iron tip repeatedly(more than three times)to the


    same patterns. Also take care not to apply the tip with
    force.
    7. Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the
    unit.
    8. Cautions in checking that the optical pickup lights up.
    The laser is focused on the disc reflection surface through
    the lens of the optical pickup. When checking that the
    laser optical diode lights up, keep your eyes more than
    30cms away from the lens. Prolonged viewing of the laser within 30cms may damage your eyesight.
    9. Cautions in handling the optical pickup
    The laser diode of the optical pickup can be damaged by
    electrostatic charge caused by your clothes and body.
    Make sure to avoid electrostatic charges on your clothes
    or body, or discharge static electricity before handling the
    optical pickup.
    9-1. Laser diode
    The laser diode terminals are shorted for transportation in order to prevent electrostatic damage.
    After replacement, open the shorted circuit. When
    removing the pickup from the mechanism, short
    the terminals by soldering them to prevent this
    damage.
    9-2. Actuator
    The actuator has a powerful magnetic circuit. If a
    magnetic material is put close to it. its characteristics will change. Ensure that no foreign substances
    enter through the ventilation slots in the cover.
    9-3. Cleaning the lens
    Dust on the optical lens affects performance. To
    clean the lens, apply a small amount of isopropylalcohol
    to lens paper and wipe the lens gently.

    CAUTIONS
    Use of controls, adjustments, or performance of procedures other than those specified herein, may result in hazardous radiation
    exposure.
    The compact disc player should not be adjusted or repaired by anyone except properly qualified service personnel.

    

    

    PI-2384M-A

    -2-

    EXPLODED VIEWPARTS LIST


    Main section

    NO.

    PART NO.

    DESCRIPTION

    CD CHANGER MODULE

    310-1620-01 UPPER CASE

    Q'TY

    NO.

    17

    PART NO.

    320-0580-00 DUSTPROOF COVER

    DESCRIPTION

    Q'TY
    1

    18

    320-0581-00 DUSTPROOF COVER

    311-1702-20 LOWER CASE

    19

    383-0668-00 FACE PANNEL

    347-5476-00 INSULATOR

    20

    383-0668-10 FACE PANNEL

    371-3852-02 TRIM PLATE

    21

    702-3008-81 TAP SCREW(38)

    382-4518-00 EJECT BUTTON

    22

    714-5008-81 MACHINE SCREW(M58)

    620-0775-00 DAMPER PLATE C

    23

    039-1100-00 CONNECTOR PWB


    (WITHOUT COMPONENT)

    24

    074-1194-00 OUTLET SOCKET

    25

    075-0305-00 JACK

    26

    620-0776-00 CE-NET HOLDER

    27

    013-8101-00 ADDRESS SWITCH

    28

    716-1727-00 MAIN-PWB-SCREW

    29

    300-7856-00 MOUNTING BRACKET

    30

    300-7855-00 MOUNTING BRACKET

    620-0727-01 DAMPER PLATE R

    622-1332-01 FL-PIN

    10

    622-1344-01 FL-PIN SR

    11

    629-0060-00 DAMPER ST6

    12

    716-1716-00 SCREW (M23)

    11

    13

    750-3242-00 FL SPRING

    14

    750-3243-00 FL SPRING SR

    15

    286-9571-00 SET PLATE

    16

    370-5929-00 ESCUTCHEON

    The parts of CD CHANGER MODULE are the same as the original(CDC655Tz) service manual.

    -3-

    PI-2384M-A

    You might also like