Cooling tower fills with the highest thermal performance and product quality. Available in a broad selection of sheet spacings, flute designs, sheet thicknesses, and plastic compositions.
... for CoUnTer flow Towers
CROSS-FLUTED
CF1200MA
CF1900MA
AccuPac Cross-Fluted Fills improve water
distribution by splitting the water stream as it descends through the fill pack. Brentwoods CF1900/CF1900MA design splits the water stream 8 times in a 12 (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are achieved through engineered flute/microstructure design and the highest manufacturing standards.
Ma Technology PATENT NuMBERS 6,544,628 AND 6,640,427 u.S. AND INTL PATENTS
FEATURES & BENEFITS
Bonded edge with dedicated bond points for added durability Engineered microstructure for improved water distribution and thermal mixing High thermal performance Improved water distribution Proprietary edge cutting technology produces square packs that efficiently direct water to both sides of sheet Material exceeds Cooling Technology Institute (CTI) Standard 136 (see below*)
Male/Female attachment tabs
align with and nest into the adjoining sheets tabs.
CF1900 & CF1900MA: The
popular choice for field-erected or factory-assembled counterflow cooling towers. Can also be used in crossflow towers. For use in Power, Refining, Chemical, Steel, and Food Processing applications where water quality is good. CFS3000: For the same applications as the CF1900 and CF1900MA, but the CFS3000s larger channels decrease fouling potential in low-quality water.
Attachment tabs are
pressure-sealed ...
ApplIcATIoNS
Beveled Tips
CF1200 & CF1200MA:
For use in factory-assembled counterflow towers (HVAC and general industrial applications) and as a distribution pad in 3.94(100 mm) and 5.90 (150 mm) depths. Beveled Tips (left) promote drainage for lowest pressure drop.
... creating a strong,
permanent bond without glue, solvents, or adhesives!
CFS3000
OFFSET VERTICAL
Double-Folded Edges
CF1900SS
CF1900SS: The choice for ultimate heat sink towers
and use in any critical-application counterflow or crossflow cooling tower (field-erected or factoryassembled). With the same exceptional thermal performance and strength of our PVC packs, Brentwoods stainless steel fills offer these additional advantages: Stainless steel provides the ultimate in performance, durability, and service life Rated to high temperatures up to 500F (260C) Chemical and corrosion resistant ... lasts virtually forever Non-flammable Similar in weight to plastic fills, significantly lighter than ceramic fills Double-folded edge for durability & safety (above) Reinforcing rib microstructure for superior water distribution, thermal mixing, and high strength-to-weight ratio
TECHNICAL SUPPORT Thermal (KaV/l) Curves and Pressure Drop Curves are available for all Brentwood film fills to assist in selecting the appropriate fill capacity for your design. other Brentwood technical bulletins include installation recommendations, Product selection for specific water Quality, Thermal ratings, and Product storage recommendations.
OF21MA
AccuPac Offset Vertical Fill combines the lowfouling characteristics of vertical flow with the enhanced water distribution of our cross-fluted designs. The OF21MAs high KaV/L thermal performance and low pressure drop are similar to the CF1900/CF1900MA design, but with lower potential for fouling.
FEATURES & BENEFITS
High thermal performance Lower fouling potential Bonded edge with dedicated bond points for added durability Adhesive-free Mechanical Assembly (MA) technology is environmentally-friendly and allows fill packs to be assembled on-site without glue Proprietary edge cutting technology produces square packs that efficiently direct water to both sides of sheet Material exceeds Cooling Technology Institute (CTI) Standard 136 (see below*)
ApplIcATIoNS OF21MA: For use in counterflow cooling towers (field-erected and factory-assembled installations) in Power, Refining, Chemical, Steel, and Food Processing applications where water quality is average. (See Brentwood Fill Selection/Water Quality Table)
* Brentwood sheet thicknesses are quoted in final gauges (as measured in field) of .008 (.203 mm), .010 (.254 mm), .015 (.381 mm), or your specific requirement. All Brentwood fill products are available in PVC and are uV stabilized. The PVC compounds used in Brentwood fills have outstanding resistance to weather exposure and are nearly impervious to chemical degradation by alkali, acids, greases, fats, oils, and biological attack. Brentwood PVC has excellent fire rating due to its self-extinguishing characteristics and meets or exceeds Cooling Technology Institute Standard 136. HPVC (high temperatures), PP (polypropylene), and ABS plastics are also available for special applications.
VERTICAL FLOW
VF19PLuS
AFVF19
AccuPac Vertical Flow Fills feature vertical flow
channels with large openings that allow the higher water velocities necessary to create an anti-fouling environment in the fill. In the VF19PLuS weve added an engineered micro-structure to the flutes to improve water distribution and thermal mixing.
FEATURES & BENEFITS
Anti-fouling design Bonded edge with dedicated bond points for added durability Extensively tested by a third party in an operating natural draft cooling tower serving a large utility power plant Material exceeds Cooling Technology Institute (CTI) Standard 136 (see below*)
AccuClean AFVF19**: For use in counterflow
cooling towers for utility and industrial applications where surface waters are used for make-up. Typical applications are Power, Refining, Chemical, Mining, and Food Processing. Anti-fouling, 19 mm pitch vertical flow design with engineered microstructure for high water velocity, improved water distribution, and thermal mixing Produced in metric fill air travel depths and lengths Extensively tested by a third party in an operating natural draft cooling tower serving a large utility power plant Available in rigid PVC and high-temperature HPVC AccuClean AFVF19MA**: All the features and performance of the AFVF19, plus these additional advantages:
ApplIcATIoNS VF19PLUS**: For use in counterflow cooling towers where water quality is poor (poor make-up water or process contamination). Typical applications are Power, Refining, Chemical, Mining, and Food Processing.
VF3800
VF3800: For the same
counterflow applications as the VF19PLuS, the VF3800 has larger, 38 mm flute openings and no microstructure ... for conditions where fouling potential is greater.
** Because a cooling tower spray systems washing effect
reduces the fouling potential of the top 12 (305 mm) of fills, a top layer of OF21MA or CF1900/CF1900MA can improve overall performance.
... for Cross flow Towers
CROSS-FLUTED
HERRINGBONE
XF75
XF75ID
XF75IL
AccuPac Cross Flow Herringbone Fill uses a
proven herringbone surface design engineered to distribute water evenly over the entire fill area for high thermal performance. The fill packs have honeycomb bonded edges on the air inlets and outlets, plus interlocking offsets that space the sheets and form strong, stackable packs. Herringbone fills with integral inlet louvers (XF75IL) and drift eliminators (XF75ID) complete this efficient, high-performance, crossflow media system.
FEATURES & BENEFITS
XF125 Brentwood's XF125 has cross-corrugated sheets with a built-in internal slant. The sheets have alternating flute angles of 45 and 15, which allow the fill to be installed vertically and without an angle cut. The XF125 provides for a simple installation that saves space in the tower, which means savings for both assembly and material costs.
FEATURES & BENEFITS
Has an excellent internal water distribution at a wide range of air velocities Highest thermal performance per unit volume of any crossflow fill Simple construction and assembly requirements
Superior air/water management for high thermal
performance Engineered herringXF SUPPORT SYSTEM bone surface for even Available in PVC and water distribution Includes Base Supports, HPVC Fill Support Beams, and Bottom-supported for Front/Back Retainers. Available durability and ease of Proprietary edge cutting in a variety of sizes & configurations. installation technology that directs Integral inlet louvers water to both sides of sheet eliminate splash out Material exceeds Cooling Technology Institute (CTI) Integral drift eliminators reduce drift loss Standard 136 (See inside*)
ApplIcATIoNS XF75: Designed on a 5 angle for easy installation in package crossflow towers (for HVAC and general industrial use). XF75IL: Integral Inlet Louver with fill section for use with XF75 media. XF75ID: Integral Drift Eliminator with fill section for use with XF75 media. Other drift eliminators can be added for ultra-low drift loss.
ApplIcATIoNS The XF125 is designed for package crossflow cooling towers where the fill is to be installed without an external slant or in evaporative coolers and pre-coolers. Water quality must be good to very good.
