Scribd Logo
Upload

Welcome to Scribd!

  • 464 views

    2 Mbpsmodem

    Uploaded by

    Raghu Vamsi Krishna
    The TEAMLINK 3002 is a 2Mbps SHDSL digital modem that can operate over single or four copper wire lines up to distances of 6km and 7.5km respectively. It has interchangeable digital interfaces including G.703 E1, V.35, and 2-4 port Ethernet. The modem provides line protection, long reach, field upgradeability, and supports balanced and unbalanced interfaces. It can be monitored and managed through SNMP, telnet, and has front panel LEDs/LCD for status.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    2 Mbpsmodem

    Uploaded by

    Raghu Vamsi Krishna
    464 views4 pages
    The TEAMLINK 3002 is a 2Mbps SHDSL digital modem that can operate over single or four copper wire lines up to distances of 6km and 7.5km respectively. It has interchangeable digital interfaces including G.703 E1, V.35, and 2-4 port Ethernet. The modem provides line protection, long reach, field upgradeability, and supports balanced and unbalanced interfaces. It can be monitored and managed through SNMP, telnet, and has front panel LEDs/LCD for status.

    Original Description:

    modem basics

    Original Title

    2Mbpsmodem

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The TEAMLINK 3002 is a 2Mbps SHDSL digital modem that can operate over single or four copper wire lines up to distances of 6km and 7.5km respectively. It has interchangeable digital interfaces including G.703 E1, V.35, and 2-4 port Ethernet. The modem provides line protection, long reach, field upgradeability, and supports balanced and unbalanced interfaces. It can be monitored and managed through SNMP, telnet, and has front panel LEDs/LCD for status.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    464 views4 pages

    2 Mbpsmodem

    Uploaded by

    Raghu Vamsi Krishna
    The TEAMLINK 3002 is a 2Mbps SHDSL digital modem that can operate over single or four copper wire lines up to distances of 6km and 7.5km respectively. It has interchangeable digital interfaces including G.703 E1, V.35, and 2-4 port Ethernet. The modem provides line protection, long reach, field upgradeability, and supports balanced and unbalanced interfaces. It can be monitored and managed through SNMP, telnet, and has front panel LEDs/LCD for status.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Team Engineers

    Solutions in Connectivity
    An ISO 9001 : 2008 Company

    TEAMLINK 3002

    SHDSL

    2Mbps Digital Modem

    TECHNICAL SPECIFICATIONS
    G.SHDSL LINE INTERFACE

    Line type : 2Wire (single pair operation)


    Line Code : TCPAM as per the ITU-T G991.2
    Line Impedance : 135 Ohms
    Connector : RJ45
    Transmit Signal Power : 3.5dBm +/- 0.5dBm
    Operating Range : 6Km on 0.5mm dia copper cable @ 2.048Mbps in 2 wire operation, 7.5Km on 0.5mm dia copper cable @
    2.048Mbps in 4 wire operation and 11Km on 0.5mm dia copper cable @ 64Kbps in 2 wire operation
    Line protection : As per ITU-T K20 and K21
    Transmit Level : Upto 14dBm
    Line Code transmission
    Specification : ANSI T1.601
    Connector : RJ 45 and 3 Pin terminal Block.
    PLUGGABLE DIGITAL USER INTERFACES

    G703 E1
    V35 / RS530 / X.21
    2/4 Port Ethernet Switch
    G703 Co-dir
    Interchangeable digital interface cards in given modem
    The same V35 modem should work with G703E1 or G703 Co-Dir modem
    The same Ethernet modem should work with G703E1 or G703 Co-Dir modem
    G703 E1 INTERFACE SPECIFICATIONS

    V35 INTERFACE SPECIFICATIONS

    Line Rate : 2048 Kbps


    Line Code : HDB3
    Interface : E1 Interface as per ITU-T G.703, G.704
    Impedance : 120 Ohms (Balanced), Optional : 75 Ohms (Unbalanced)
    Connector : RJ45 for Balanced and BNC for Unbalanced
    Clock Mode : Internal clock or G.703 Recovered clock
    Framed and Unframed Operation
    User selectable CRC-4 Generation and Detection

    Interface Type : V35


    Connector : V34 Pin Female Connector
    Data Rates : 2.304 Mbps (nX64 Kbps, n=1 to 36)
    Clock Modes : Internal clock, Line Recovered clock
    or External clock
    Connector : RJ45 for Balanced and BNC for Unbalanced
    Clock Mode : Internal clock or G.703 Recovered clock
    Framed and Unframed Operation
    User selectable CRC-4 Generation and Detection

    ETHERNET INTERFACE SPECIFICATIONS

    No. of Ethernet ports : 2/4 (2/4 Port Switch), RJ45 connectors for UTP cables
    Interface Compliance : IEEE802.3 Compliant
    10Base-T and 100Base-TX support
    2 K MAC address level filtering
    Transparent Ethernet Bridge, Auto learning and aging
    Auto Speed Sensing
    Auto polarity detection

    Team Engineers
    Solutions in Connectivity
    An ISO 9001 : 2008 Company

    TEAMLINK 3002

    SHDSL

    2Mbps Digital Modem

    G703 CO-DIR INTERFACE SPECIFICATIONS

    MODEM CONFIGURATION

    ITU-T 703 4 wire Co-Directional interface


    Speed : 64Kbps
    Line Code : AMI
    Connector : RJ 45 or Terminal block
    Clock Mode : Internal clock or G.703 Recovered clock

    Management port operating speed 9600, No Parity and stop Bit


    and also using Dipswitch settings.
    Configuration & Status Monitoring through SNMP, LCD & TELNET
    Ethernet Port
    STATUS MONITORING: Using SNMP and TELNET

    DIAGNOSTIC TESTS

    LED INDICATIONS : PWR, MR, COT, DSL LINK, E1 SYN/DTR/ETH

    LINK ACT, AIS/RTS/SPD, PAT, ERR, TST, NMR


    Local Loopback, Digital Loopback and Remote Loopback as
    per the V.54
    Built in test 511 pattern generation and checking.
    Diagnostics & Monitoring through EOC Channel without
    interfering data transmission.
    Loop backs, test pattern generation and checking using
    front panel switches.
    SNMP Management Port & TELNET.

    BUILT-IN POWER : DUAL MODE AC/DC, 230VAC +/- 10% &

    48VDC +/-10%
    TEMPERATURE : -5 To 50C
    HUMIDITY : Upto 95% non condensing at 35C

    TEC Approval : As per IR/DCA-18/04. Oct 2005

    FEATURES
    Provides multi stage line protection as per K.20 and K.21
    External Secondary optional Line Protection Device
    Long reach up to 11Km for standard 64Kbps speed
    Interchangeable user interface cards in the same modem and field upgradeability
    Support for Balanced and Unbalanced operation for G703 E1
    The same V35/Ethernet RT modem should work with G703E1 or G703 Co-Dir COT modem
    User interface cards can be ordered optionally depending on the field requirement
    Noise Margin Indication for sensing line quality
    LED/LCD front panel as an option
    Status monitoring using SNMP & TELNET
    Rugged Metallic Aluminum casing
    AC and DC built-in power supply

    Team Engineers
    Solutions in Connectivity
    An ISO 9001 : 2008 Company

    TEAMLINK 3002

    SHDSL

    2Mbps Digital Modem

    APPLICATION DIAGRAM

    Team Engineers
    Solutions in Connectivity
    An ISO 9001 : 2008 Company

    Team Engineers
    Solutions in Connectivity
    An ISO 9001 : 2008 Company

    TEAMLINK 3002

    SHDSL

    2Mbps Digital Modem

    APPLICATION DIAGRAM

    Team Engineers Advance Technologies India (P).Ltd

    Team Engineers
    Solutions in Connectivity
    An ISO 9001 : 2008 Company

    You might also like