Scribd
Upload
36 views

Unit7 DistributedQueueing

Distributed queuing allows messages to be sent between queue managers that may be on different machines even in different locations. It uses message channels to transmit messages from a source queue manager to a target queue manager. The key components of distributed queuing are message channels, transmission queues, dead letter queues, and remote queue definitions. Message channels come in pairs like sender-receiver and control the transmission of messages. Transmission queues store messages before they are sent across channels. Dead letter queues hold messages that could not be routed to their destination. Remote queues define target queues on remote queue managers to allow applications to put messages to queues managed by other queue managers.

Uploaded by

Aazmi Sayed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
36 views

Unit7 DistributedQueueing

Distributed queuing allows messages to be sent between queue managers that may be on different machines even in different locations. It uses message channels to transmit messages from a source queue manager to a target queue manager. The key components of distributed queuing are message channels, transmission queues, dead letter queues, and remote queue definitions. Message channels come in pairs like sender-receiver and control the transmission of messages. Transmission queues store messages before they are sent across channels. Dead letter queues hold messages that could not be routed to their destination. Remote queues define target queues on remote queue managers to allow applications to put messages to queues managed by other queue managers.

Uploaded by

Aazmi Sayed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 24

Distributed Queuing

Topics
Introduction

How does distributes computing works


Distributed queuing components
Distributed queuing setup

Introduction
Distributed environment

In WMQ, intercommunication means sending


messages from one queue manager to another.
The receiving queue manager can be on the same
machine or another; nearby or on the other side
of the world.
It can be running on the same platform as the
local queue manager, or can be on any of the
platforms supported by WMQ. This is called a
distributed environment.

Introduction
WMQ handles communication in a distributed
environment such as this using Distributed
Queue Management (DQM).

The local queue manager is sometimes called


the source queue manager and the remote
queue manager is sometimes called the target
queue manager or the partner queue
manager.

How does distributed queuing work?

How does distributed queuing work?


Components needed to send a message.

Distributed queuing components


The components of distributed queuing are:
Message channels
Dead-letter queues
Remote queue definitions

Distributed queuing components

Distributed queuing components


Message channels

Message channels are the channels that carry


messages from one queue manager to
another.
Types of channels
Sender
Receiver
Server
Requester
Cluster sender
Cluster receiver

Distributed queuing components


Message channels
Channels works in following pairs
Sender-receiver
Requester-server
Requester-sender (callback)
Server-receiver
Cluster sender-cluster receiver

Distributed queuing components


Message channel Agent

Message channel agent (MCA) is a program that


controls the sending and receiving of messages.
There is one MCA at each end of a channel.
One MCA takes messages from the transmission
queue and puts them on the communication link.
The other MCA receives messages and delivers
them onto a queue on the remote queue
manager.

Distributed queuing components


Sender-receiver channels
Sender channel should have corresponding receiver channel on
destination queue manager.
Sender and receiver channel should have same name.
MCA at sender channel side picks the message from transmission
queue and send it across the channel.
MCA at receiver channel side receives the message from receiver
channel and place it on the destination queue.

Distributed queuing components


Sender-receiver channels

Distributed queuing setup


Transmission queue

Special type of local queue used to store


messages before they are transmitted by the MCA
to the remote queue manager.
In distributed-queuing environment, transmission
queue need to be defined for each sending MCA.
Sending channel/MCA picks message from this
queue and sends it across to destination queue
manager.

Distributed queuing setup


Transmission queue

Can be created by using DEFINE QLOCAL statement in


runmqsc prompt.
DEFINE QLOCAL(<transmission queue name>) +
USAGE(XMITQ) +
INITQ(<initiation queue name>) +
TRIGDATA(<sender channel name>)

Ensure that queue specified with INITQ attribute exists


on queue manager.
On z/OS , initiation queue name should be
SYSTEM.CHANNEL.INITQ.
This is recommended on other platforms also.
Initiation queue is used to start the channel automatically.

Distributed queuing setup


Dead letter queue
Also called undelivered-message queue.
Dead letter queue is a local queue to which messages are
sent if they cannot be routed to their correct destination.
Messages are put on this queue when they cannot be put on
the destination queue for some reason (eg:- queue does not
exist, or queue is full, put inhibited for queue).
Dead letter queue is associated with queue manager
ALTER QMGR DEADQ(<Dead letter queue name>)

Distributed queuing setup


Remote queue
Queues which are owned by another queue manager.
Used to send messages to a queue located in a remote queue
manager.
Doesnt have memory associated with it. Stores the message
in the associated transmission queue.
Enables application to put message to a queue on a different
queue manager than the queue manager to which it is
connected.

Distributed queuing setup


Remote queue
Remote queues are created using DEFINE QREMOTE
statement in runmqsc prompt.
DEFINE QREMOTE(<Remote queue name>) +
RNAME(<name of remote queue name on remote qmgr>) +
RQMGR(<Remote queue manager name>) +
XMITQ(<Transmit queue name>)

Distributed queuing setup


Sender channel
Defined on source queue manager.
Channel with channel type as SENDER.
Following are the mandatory parameters for sender channel
The name of the transmission queue to be used (the XMITQ
attribute).
The connection name of the partner system (the CONNAME
attribute).
The name of the communication protocol you are using (the TRPTYPE
attribute).

Distributed queuing setup


Sender channel
Can be created by using DEFINE CHANNEL statement in
runmqsc prompt.
DEFINE CHANNEL(QM1.QM2) CHLTYPE(SENDER) +
XMITQ(<transmit queue name >) +
CONNAME(<IP of remote host>(<remote qmg port>))
Other channel properties will be inherited from default
system channel SYSTEM.DEF.SENDER

Distributed queuing setup


Receiver channel

Exists on target queue manager.


Channel with channel type as RECEIVER.
Channel name should be same as the sender channel name.
Created using DEFINE CHANNEL on runmqsc prompt.
DEFINE CHANNEL(QM1.QM2) CHLTYPE(RCVR)
Once sender and receiver channels are created, channels
should be started at both ends and it should be ensured that
channels are running.
START CHANNEL(QM1.QM2)
DISPLAY CHSTATUS(QM1.QM2)

Distributed queuing setup


Destination queue

Exists on target queue manager.


Destination queue can be alias queue , local queue
or remote queue belonging to another remote
queue manager.

Questions??

Thank you

You might also like