Scribd
Upload
275 views14 pages

User Guide For MagiCreate

The document is a user guide for MagiCreate, a tool for modelling MEP products and components. It describes how to start MagiCreate and select or create databases. Users can add new products to databases by selecting categories, sub-categories, and groups, then choosing a template. Products and their variants can be viewed and modified. Advanced product-specific and variant-specific data can also be edited. The guide covers switching databases and creating products without templates by selecting existing 3D geometries.

Uploaded by

Inventor Solidworks
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
275 views14 pages

User Guide For MagiCreate

The document is a user guide for MagiCreate, a tool for modelling MEP products and components. It describes how to start MagiCreate and select or create databases. Users can add new products to databases by selecting categories, sub-categories, and groups, then choosing a template. Products and their variants can be viewed and modified. Advanced product-specific and variant-specific data can also be edited. The guide covers switching databases and creating products without templates by selecting existing 3D geometries.

Uploaded by

Inventor Solidworks
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 14

MagiCreate User Guide

MagiCreate - User Gde

1(13)

MagiCreate User guide


MagiCreate is an easy-to-use tool for advanced modelling of MEP products and components. This
user guide describes the main functions of the modelling tool.
With MagiCreate, MagiCAD users can create tailored databases, model completely new products and
modify existing ones by editing product properties, dimensions and technical data.
All databases and products created with MagiCreate are supported by MagiCAD for AutoCAD and
MagiCAD for Revit from the version 2014.11 onwards.
MagiCreate can be downloaded and installed either from the Tools section of the MagiCAD Download
Portal: https://portal.magicad.com/Download/GetProductCategoryList?categoryId=6 or
by using PluginManager in MagiCAD for AutoCAD and MagiCAD for Revit.
Once MagiCreate is installed, it will automatically checks for new version when it is started.

Contents of the guide


Starting MagiCreate .............................................................................................................. 2
MagiCreate menu .............................................................................................................. 3
Settings.............................................................................................................................. 4
Adding new products to a selected database ..................................................................... 5
Switching to another database ........................................................................................... 8
Advanced product-specific data ......................................................................................... 9
Advanced variant-specific data ........................................................................................ 10
Creating products without using templates ....................................................................... 11
Keyboard shortcuts .......................................................................................................... 13

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

2(13)

Starting MagiCreate
When starting MagiCreate, you can select one of the following two options:
1. Create a new database by clicking the CREATE NEW button.
2. Open an existing, previously-edited database by selecting one of the quick links displayed in
the Open recent database list, or browse for another database by clicking the OPEN
ANOTHER DATABASE button.
2. Select an
existing database
using the quick
links, or browse for
another one by
clicking the OPEN
ANOTHER
DATABASE button.

1. Click the
CREATE NEW
button to create a
new database.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

3(13)

MagiCreate menu
This section describes the items and functionality of the MagiCreate main menu.

To open the menu,


click the menu button
in the upper left
corner of the main
window.

The main menu displays the following options.


To create a new
database, select New
database.

To save a currently open


database with a new name, select
Save as.

The main menu also


displays a quickselection list of the
most recently opened
databases.
To open a recently
edited database,
select the database
from the list.

To remove unused models, select


Purge unused models
To view and edit database default
settings, select Settings. The
Settings dialog opens (see
section Settings for details).

Instructions can be
loaded here.
To exit the program, select
Exit.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

4(13)

Settings
In the Settings dialog, the user can view and edit general database properties and make changes to
database default settings.

Unselect The
Automatically
check for updates
checkbox if not
wanted to check
updates when
program starts.

The Manufacturer field defines the


name of the database (e.g.
manufacturer brand name or company
name). The database will catalogued
under this name in the MagiCAD
Product Browser, Bills of Materials, etc.

The Website field defines a web address


(e.g. company website) from which the
user viewing the manufacturers product
database in the MagiCAD Product
Browser can find additional product
information and contact details.

The Use templates


with new products
checkbox must be
selected if you want
to use generic
products as templates
for new products.
Deselect this option if
you want to create a
new product based on
existing 3D geometry.

Press Check for


updates button to
check if there is new
version in MagiCAD
Download Portal.
The Password field
allows you to protect
the database from
modifications and
further editing using a
password.

The Default language control selects the


default language for displaying user-defined
product description texts when multiple
language versions have been defined.

Select the Online product


database locations.
Database opens faster with
the closest location.

The User interface


language control defines
the language of the
MagiCreate user interface.

This default language selection is always


visible on the Description field of products
and variants (see below).

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

5(13)

Adding new products to a selected database


Creating a new product to a selected database requires you to carry out the following three steps:
1. First select a product category (e.g. Ventilation etc.)
2. Then select a product sub-category (e.g Indoor climate devices etc.)
3. Next select the product group (e.g. Fan coil units etc.)
4. And finally click the CREATE NEW button.
A new product is added to the database.
1. Select a product
category

2. Select a product
sub-category

2. Select a product
group

3. Click the CREATE


NEW button.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

6(13)

After clicking the CREATE NEW button, the Product Browser window will open. In the Product
Browser window, you can select an existing generic product as a template for the new product.

You can select which content and


product variants you want to include
in the product template. You can also
leave out all variants by not selecting
any. After selecting the content to be
included in the template, click OK.

Clicking OK adds the product and the selected variants into the database.

The product is added to the


database with the selected
variants.
Please note that if
no variants were included in
the product template,
MagiCreate automatically
adds one variant using
a default variant name.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

7(13)

Viewing and modifying existing products


To view and edit a product, select the product or one of its variants. Most of the technical data is
variant-specific and can only be accessed by selecting the variant.

To remove a variant,
select the variant and
click the DELETE button.

The Code field allows


you to modify the variant
name.

The SAVE button is only


enabled if the latest
modifications have not yet
been saved.

To cancel last unsaved


modifications. Click the
UNDO button.

Select a variant to
view and access its
properties.

The dimensions of the variant can be


modified by editing the values in this table.
For optional and more advanced technical
data modifications, please see section
Advanced variant-specific data.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

8(13)

Switching to another database


You can switch to another database without closing the program.
Click the CHANGE button and
select another database.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

9(13)

Advanced product-specific data


On the product level, a product has certain general properties which are shared by all of the products
variants.

To access advanced
product-specific data,
click the +/- button.

To define product-specific description


texts in multiple different language
versions, click the MORE button to open
the Descriptions dialog.

Click the link Market area


codes and websites to define
different product codes and
websites for different market
areas.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

10(13)

Advanced variant-specific data


Most of the technical data is variant-specific and can only be defined and modified on the variant level.
The optional technical data varies between different product types.

Below you can see an example of the technical data contained by a fan coil variant.

The selected fan coil variant has both heating and


cooling properties. By selecting the relevant tab, you
can edit the variants heating and cooling properties.

This control allows you to modify


pressure drop data. The
pressure drop curve in the
diagram above will be updated
accordingly.

These controls allow you to define


maximum and minimum values for the
diagram above.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

11(13)

Creating products without using templates


To create a new product without using an existing template as a basis, carry out the following three
steps:
1. First deselect the Use templates with new products checkbox in the Database defaults
dialog and click OK.
2. Then click the CREATE NEW button and select PRODUCT from the drop-down options.
3. And finally select a suitable 3D geometry from the list of 3D geometries found in the current
database.

1. Deselect the Use templates


with new products checkbox to
create a new product based on
existing 3D geometry. Click OK.

2. Click the CREATE NEW button and select


PRODUCT from the drop-down options.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

12(13)

When PRODUCT is selected from the CREATE NEW drop-down options, the Select 3D geometry
window opens.
To add a new 3D geometry into the current
database from the MagiCAD Product Browser,
click the ADD FROM BROWSER button.

3. Select a 3D geometry from the list of 3D


geometries found in the current database.

Select a suitable 3D geometry and click OK.


MagiCreate displays the new product with one automatically created variant. Since only the 3D
geometry data exists, the user must enter all other relevant product and variant-specific data
manually.

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

13(13)

Keyboard shortcuts
You can access some of the most commonly used MagiCreate functions using the following
shortcuts:

CTRL+O

Open database

CTRL+S

Save changes

CTRL+U

Undo the latest changes

CTRL+N

Create a new product

CTRL+B

Create a new variant

CTRL+R

Remove the current product/variant

CTRL+F

Move the cursor to the Filter field

Progman Oy, Nortamonkatu 1, 26100 Rauma, Finland | Tel. +358 2 8387 6000 | www.magicloud.com | [email protected]

You might also like