Scribd
Upload
130 views1 page

1Nz-Fe Engine Mechanical: Service Data

The document provides service specifications for the 1NZ-FE engine, including ignition timing, idle speeds, compression pressures, belt tensions and deflections, valve clearances, chain and valve dimensions, and spring specifications. Key specifications include ignition timing of 8-12 degrees BTDC, idle speeds of 600-700 rpm for manual transmission and 650-750 rpm for automatic, standard compression pressure of 1,471 kPa, intake and exhaust valve clearances of 0.15-0.25 mm and 0.25-0.35 mm respectively, and valve spring installed tension of 149-165 N at 32.5 mm compression.

Uploaded by

arstjunk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
130 views1 page

1Nz-Fe Engine Mechanical: Service Data

The document provides service specifications for the 1NZ-FE engine, including ignition timing, idle speeds, compression pressures, belt tensions and deflections, valve clearances, chain and valve dimensions, and spring specifications. Key specifications include ignition timing of 8-12 degrees BTDC, idle speeds of 600-700 rpm for manual transmission and 650-750 rpm for automatic, standard compression pressure of 1,471 kPa, intake and exhaust valve clearances of 0.15-0.25 mm and 0.25-0.35 mm respectively, and valve spring installed tension of 149-165 N at 32.5 mm compression.

Uploaded by

arstjunk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SS6

SERVICE SPECIFICATIONS 1NZ-FE ENGINE MECHANICAL

1NZ-FE ENGINE MECHANICAL


SERVICE DATA
Ignition timing

8 to 12 BTDC

Engine idle speed

M/T

600 to 700 rpm

A/T

650 to 750 rpm

Compression

Standard compression pressure

1,471 kPa (15.0 kgf/cm2, 213 psi)

Minimum pressure

1,079 kPa (11.0 kgf/cm2, 156 psi)

Difference between each cylinder

98 kPa (1.0 kgf/cm2, 14 psi)

Generator V belt tension

New belt

121 to 143 lbf

Used belt

55 to 88 lbf

Vane pump V belt tension

New belt

99 to 121 lbf

Used belt

55 to 77 lbf

Generator V belt deflection

New belt

7.0 to 8.5 mm (0.28 to 0.33 in.)

SS

Used belt

11.0 to 13.0 mm (0.43 to 0.51 in.)

Vane pump V belt deflection


: Pressing force 98 N (10 kgf, 22 lbf)

New belt

8.0 to 10.0 mm (0.31 to 0.39 in.)

Used belt

11.0 to 13.0 mm (0.43 to 0.51 in.)

Valve clearance (cold)

Intake

0.15 to 0.25 mm (0.006 to 0.010 in.))

Exhaust

0.25 to 0.35 mm (0.010 to 0.014 in.)

Maximum chain elongation

123.2 mm (4.850 in.)

Chain
Chain tensioner slipper

Maximum wear

1.0 mm (0.039 in.)

No. 1 chain vibration damper

Maximum wear

1.0 mm (0.039 in.)

Cylinder head for flatness

Maximum warpage
: Cylinder block side

0.05 mm (0.0020 in.)

Maximum warpage
: Intake manifold side

0.10 mm (0.0039 in.)

Maximum warpage
: Exhaust manifold side

0.10 mm (0.0039 in.)

Cylinder head set bolt

Standard length

142.8 to 144.2 mm (5.622 to 5.677 in.)

Maximum length

147.1 mm (5.791 in.)

Cylinder block for flatness

Maximum warpage

0.05 mm (0.0020 in.)

Intake valve

Standard overall length

89.25 mm (3.5138 in.)

Minimum overall length

88.75 mm (3.4941 in.)

Standard valve stem diameter

4.970 to 4.985 mm (0.1957 to 0.1963 in.)

Exhaust valve

Valve spring

Standard margin thickness

1.0 mm (0.039 in.)

Minimum margin thickness

0.7 mm (0.028 in.)

Standard overall length

87.90 mm (3.4606 in.)

Minimum overall length

87.40 mm (3.4409 in.)

Standard valve stem diameter

4.965 to 4.980 mm (0.1955 to 0.1961 in.)

Standard margin thickness

1.15 mm (0.045 in.)

Minimum margin thickness

0.7 mm (0.028 in.)

Standard free length

45.05 to 45.15 mm (1.774 to 1.778 in.)

Maximum deviation

1.6 mm (0.063 in.)

Maximum angle (reference)

Standard installed tension

149 to 165 N (15.2 to 16.8 kgf, 33.5 to 37.1


lbf) at 32.5 mm (1.280 in.)

Maximum workin

286 to 316 N (29.1 to 32.2 kgf, 64.2 to 71.0


lbf) at 23.9 mm (0.941 in.)

You might also like