This document outlines specifications for seamless and welded pipes used in oil and gas pipelines, including:
1. Acceptable pipe materials include seamless and welded steel in grades B/X42/X52/L245/L290/L360.
2. Wall thickness and diameter tolerances are provided for seamless and welded pipes.
3. Pipes must be clearly marked with specifications including manufacturer, dimensions, grade, heat number and length.
This document outlines specifications for seamless and welded pipes used in oil and gas pipelines, including:
1. Acceptable pipe materials include seamless and welded steel in grades B/X42/X52/L245/L290/L360.
2. Wall thickness and diameter tolerances are provided for seamless and welded pipes.
3. Pipes must be clearly marked with specifications including manufacturer, dimensions, grade, heat number and length.
This document outlines specifications for seamless and welded pipes used in oil and gas pipelines, including:
1. Acceptable pipe materials include seamless and welded steel in grades B/X42/X52/L245/L290/L360.
2. Wall thickness and diameter tolerances are provided for seamless and welded pipes.
3. Pipes must be clearly marked with specifications including manufacturer, dimensions, grade, heat number and length.
This document outlines specifications for seamless and welded pipes used in oil and gas pipelines, including:
1. Acceptable pipe materials include seamless and welded steel in grades B/X42/X52/L245/L290/L360.
2. Wall thickness and diameter tolerances are provided for seamless and welded pipes.
3. Pipes must be clearly marked with specifications including manufacturer, dimensions, grade, heat number and length.
SEAMLESS PIPES FOR OIL PIPELINES AND GAS PIPELINES
API 5L APPLICATION Oil and natural gas industries EXECUTION Seamless type S Welded ERW and SAW GRADE B/X42/X52/L245/L290/L360 TOLERANCES WALL THICKNESS t NOMINAL THICKNESS NON WELDED PIPES (2)(mm)
TOLERANCES (1)= (mm)
t4 4 < t < 25 t 25
+0,6 / -0,5 +0,15 t / -0,125 t +3,7 / -3,0 or +0,1 t / -0,1 t
EXTERNAL DIAMETER Tolerance of external diameter D(mm) D > 60,3 60,3 D 168,3 168,3 < D 610 610 < D 1422 D >1422
PIPE BODY
(1)
(mm)
PIPE END (1),(2),(3) (mm)
SEAMLESS WELDED SEAMLESS WELDED - 0,8 / + 0,4 -0,4 / +1,6 +/- 0,0075 D +/- 0,0075 D +/- 0,0075 D +/- 0,005 D MAX +/- 1,6 MAX +/- 3,2 +/- 0,01 D +/- 0,005 D +/- 2,0 +/- 1,6 MAX +/- 4 As per agreement
OVALIZATION D DIAMETERS (mm) D > 60,3 60,3 D 168,3 168,3 < D 610 610 < D 1422 D >1422 (1) (2)
(3)
PIPE BODY (1) (mm)
PIPE END (1),(2),(3) (mm)
Within the diameter tolerances
0,020 D 0,015 D with MAX 15mm for D/t 75
0,015 D
As agreed for D/t
>75
0,01 D with MAX
13 mm for D/t 75 As per diameter tolerances
As agreed for D/t
> 75
The pipe end is considered the part of a 100 mm length from each tube extremity. For seamless pipes, the tolerances applied for t 25 and those applied to greater thicknesses must be agreed upon. For pipes with D 219.1 mm, the diameter and ovality tolerances can be determined using the following formula: Di = D 2t Di: Internal diameter D: External diameter t: Nominal wall thickness or by measuring the internal rather than the external diameter
MASS The mass per unit length kg/m is calculated using the following formula: M=t(D - t) x C LEGEND: M = Mass per unit length (kg/m) t: Nominal wall thickness (mm) D: External diameter (mm) C: 0,0246615 The mass tolerance for each pipe must not differ from the nominal mass of +10% / - 3.5%; any further restrictions are those defined in the standard.
STRAIGHTNESS The permissible deviation on the total length of each pipe must be 0.2 % L (single pipe length). The maximum permissable deviation in relation to a 1-metre pipe section must be 4 mm.
MARKING Identification plate attached to the pipe bundle for D 48.3 mm, and with markings painted on one end for D> 48.3 mm, containing the following information: - Name or trademark of the manufacturer - Diameter and wall thickness - Grade - PSL1 or PSL2 - Reproduction process - Length - Heat number - Any additional requirements
CERTIFICATION UNI EN 10204 SIZE RANGE ASME B 36.10
