Scribd
Upload
145 views2 pages

Vivado ZED Project No I2C Connection To ADV7511

The user is having issues getting video output through an ADV7511 chip connected over I2C to a Zynq ZedBoard, as the Linux kernel is unable to communicate with the chip during boot and detects no device at the expected I2C address of 0x39, though audio functionality seems to be detected, and the hardware works when booting the stock ZedBoard image; they are using the latest HDL and kernel sources from Analog Devices' GitHub repositories and are seeking suggestions on resolving the I2C connection issue to the ADV7511.

Uploaded by

Gaurav Purohit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
145 views2 pages

Vivado ZED Project No I2C Connection To ADV7511

The user is having issues getting video output through an ADV7511 chip connected over I2C to a Zynq ZedBoard, as the Linux kernel is unable to communicate with the chip during boot and detects no device at the expected I2C address of 0x39, though audio functionality seems to be detected, and the hardware works when booting the stock ZedBoard image; they are using the latest HDL and kernel sources from Analog Devices' GitHub repositories and are seeking suggestions on resolving the I2C connection issue to the ADV7511.

Uploaded by

Gaurav Purohit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ez.analog.

com

https://ez.analog.com/thread/42131

Vivado ZED project no I2C connection to ADV7511


Same problem.

- I checkout latest HDL libraries and project scripts from https://github.com/analogdevicesinc/hdl


- Built HDL libraries and ADV7511 for ZedBoard using Vivado 2014.1 - I just needed to update versions on couple
Xilinx IP: for Zynq CPU from 7:5.3 to 7:5.4; for ConCat IP from 1.0 to 2.0 and for VDMA from 6.1 to 6.2.
Checked changelog - all changes seems to be minor.

After that I followed instructions from http://wiki.analog.com/resources/tools-software/linux-drivers/platforms/zynq


- Built BOOT.BIN
- Built Kernel from https://github.com/analogdevicesinc/linux.git using xcomm_zynq branch.
- Built DeviceTree.dtb using zynq-zed-adv7511.dts
- Prepared SD card with Linaro.

System boot normal, but nothing on screen. During boot it looks like it can't talk to ADV7511:
-------------------------------i2c /dev entries driver
adv7511 0-0039: Failed to write 98 = 3: -110
adv7511: probe of 0-0039 failed with error -110
-----------------------------But sound seems to be detected:
------------------------------drivers/gpu/drm/adi_axi_hdmi/axi_hdmi_drv.c:axi_hdmi_platform_probe[197]
platform 70e00000.axi_hdmi: Driver axi-hdmi requests probe deferral
platform leds.6: Driver leds-gpio requests probe deferral
adv7511-hdmi-snd adv7511_hdmi_snd.4: ASoC: CODEC (null) not registered
platform adv7511_hdmi_snd.4: Driver adv7511-hdmi-snd requests probe deferral

1/2

drivers/rtc/hctosys.c: unable to open rtc device (rtc0)


ALSA device list:
#0: ZED ADAU1761
-----------------------------

i2cdetect found 0x3b device, which is ADAU1761, but no 0x39 (ADV7511).

This all I got so far. Any suggestion? Should this combination of latest HDL and latest kernel work?

P.S. My hardware is fine - I see double Linux logo on HDMI monitor when I boot using ZedBoard OOB(out of box)
image.

2/2

You might also like