Scribd
Upload
110 views

GasCalc Module en

GasCalc is a software module that calculates various gas properties. It includes 12 calculation modules that determine properties such as calorific value, Wobbe index, density, combustion parameters, CO2 emission factors, methane numbers, thermal properties, phase behavior, transport properties, compression characteristics, requirements for gas heaters, and flow properties for orifice meters. The modules help with applications like energy billing, combustion processes, emissions trading, gas quality monitoring, pipeline design, liquefied natural gas processes, and compressor optimization.

Uploaded by

Cehan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views

GasCalc Module en

GasCalc is a software module that calculates various gas properties. It includes 12 calculation modules that determine properties such as calorific value, Wobbe index, density, combustion parameters, CO2 emission factors, methane numbers, thermal properties, phase behavior, transport properties, compression characteristics, requirements for gas heaters, and flow properties for orifice meters. The modules help with applications like energy billing, combustion processes, emissions trading, gas quality monitoring, pipeline design, liquefied natural gas processes, and compressor optimization.

Uploaded by

Cehan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GasCalc includes the following calculation modules

Module
(properties to be calculated)

Application examples

Energy billing, conversion of reference states


(superior calorific value, normal density)

Monitoring / compliance with DVGW Code of


Practice G260 (Wobbe index), for example
biogas injection

Design / control of combustion processes

Determination of CO2 output in accordance


with DVGW Code of Practice G693 for emissions
trading

Avoiding engine knock in gas engines /


packaged CHP

Monitoring / compliance with natural gas


quality required at CNG fuelling stations

Energy billing - conversion of volume at flowing


conditions to volume at normal conditions
(DVGW Code of Practice G486)

Energy billing in accordance with module 5


based on full analysis (DVGW Code of Practice
G486, 2nd supplement)

Design of heat exchangers, expansion /


compression processes

Calculation of data for liquefied natural gas


(LNG) processes

Calculation of dew points, boiling points

Calculation of data for extreme temperature


and pressure conditions (storage)

Calculation of pure substance data

Monitoring / compliance with DVGW Code of


Practice G260

Calculation of pressure loss in pipelines

Fluid flow calculations (Reynolds number)

Design / optimisation of natural gas


compressors

Compressor efficiency

11. Heater
Required temperature increase, heat
output and gas consumption of natural
gas-driven heaters to ISO 20765-1

Design and operation of heaters in pressure


reducing stations (regulators)

12. Orifice calculation

Determination of normal volume for differential


pressure meters

1. Gas properties to ISO 6976


Superior calorific value, Wobbe index,
normal density, molar mass, etc.

2. Combustion
Air requirement, exhaust gas analysis, etc.
3. CO2 emission factor
Calculated from gas analysis or based on
billing data
4. Methane number
Methane number to AVL method and
simplified method
5. SGERG
Thermal properties
(Compression factor, gas law deviation
factor, density) to ISO 12213-3
6. AGA 8
Thermal properties to ISO 12213-2, caloric
properties (specific heat capacity,
enthalpy, entropy, etc.) to ISO 20765-1
7. GERG 2004 reference equation
Thermal and caloric properties over entire
fluid range (gas phase, liquid phase, twophase boundary)

8. GERG Water
Water dew point to ISO 18453
9. Transport properties
Dynamic viscosity, kinematic viscosity,
heat conductivity, etc.
10. Compression
Isentropic / polytropic changes of state
based on AGA 8 equation

to ISO 5167

You might also like