Scribd
Upload
89 views2 pages

Huber - DB - wd1 PDF

The document describes a wall entrance WD1 that seals on one side to allow pipes to pass through building walls. It consists of a flange piece with a wall flange, mold sealing, hexagon bolts, and plastic joints to protect threads. It seals on one side against liquids and vermin/insects and is elastic to accommodate assembly discrepancies. Standard sizes are listed along with dimensions for the flange diameter, sleeve pipe diameter, length of front building section, and wall thickness.

Uploaded by

sasa.vukoje
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views2 pages

Huber - DB - wd1 PDF

The document describes a wall entrance WD1 that seals on one side to allow pipes to pass through building walls. It consists of a flange piece with a wall flange, mold sealing, hexagon bolts, and plastic joints to protect threads. It seals on one side against liquids and vermin/insects and is elastic to accommodate assembly discrepancies. Standard sizes are listed along with dimensions for the flange diameter, sleeve pipe diameter, length of front building section, and wall thickness.

Uploaded by

sasa.vukoje
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Wall entrance WD1, sealing on one side

Made from stainless steel

Special accessories available on request:

Wall entrance, sealing on one side to pass pipes


through building walls, consisting of a FF piece with wall
flange, mould sealing, hexagon bolts, plastic joints
protecting the threads in the flanges and the loose
gasket.
Wall thickness of building

Medium pipe outside dia.

A=

DA =

*[Specify either exact (measured) dimensions or


tolerances mm]

With foil flange

Sanded all sides for improved tightness in the


concreted area of the wall entrance.

mm

mm

Function:

Sealing on one side against liquids and vermin/insects


Elastic in longitudinal direction to accommodate
assembly discrepancies

Sealing, food-safe, chlorine resistant.

Designed for temperatures up to 70 C and 12 m WG.

Installation flush with the formwork.

Wall entrance shielded arc-welded, acid-treated in a


pickling bath and passivated.

WASTE WATER Solutions

Order no.

Standard size
DN

Medium pipe
diameter (1)

WD 1

100

97 - 122

WD 1

200

WD 1
WD 1
WD 1
WD 1

80

77 - 102

150

147 - 175

250

247 - 283

300

Wall thickness
Flange
Sleeve pipe Length of front
A
diameter DF diameter DH
building V
300

189

116

29

300

269

189

29

300

197 - 228

300
300

297 - 331

300

209
324
379
429

Dimensions in mm. For all other dimensions, see table WDT. (1) Including anti-corrosion coating and weld reinforcement

HUBER SE

136
242
297
345

Subject to technical modification


Drawing No. 190.206, 8.2010

Industriepark Erasbach A1 D-92334 Berching


Phone: + 49 - 84 62 - 201 - 0 Fax: + 49 - 84 62 - 201 - 810
[email protected] Internet: www.huber.de

Wall entrance WD1, sealing on one side


3

29
29
29
32

You might also like