Scribd
Upload
48 views2 pages

Wall Entrance WD1F, Sealed On One Side, With FF-piece

➤ The document describes a wall entrance WD1F made of stainless steel with a flat flange connection. It is sealed on one side with a FF-piece to allow pipes to pass through building walls. ➤ The wall entrance consists of a welded FF-piece with wall flange, mold sealing, bolts, plastic joints, and loose gasket to connect to continuing pipeline and absorb forces. It is designed to seal on one side against liquids/vermin, be elastic to accommodate discrepancies, and be food-safe up to 70°C. ➤ Standard sizes and dimensions are provided for pipe and wall thicknesses, flange and sleeve diameters. Special accessories like foil fl

Uploaded by

sasa.vukoje
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views2 pages

Wall Entrance WD1F, Sealed On One Side, With FF-piece

➤ The document describes a wall entrance WD1F made of stainless steel with a flat flange connection. It is sealed on one side with a FF-piece to allow pipes to pass through building walls. ➤ The wall entrance consists of a welded FF-piece with wall flange, mold sealing, bolts, plastic joints, and loose gasket to connect to continuing pipeline and absorb forces. It is designed to seal on one side against liquids/vermin, be elastic to accommodate discrepancies, and be food-safe up to 70°C. ➤ Standard sizes and dimensions are provided for pipe and wall thicknesses, flange and sleeve diameters. Special accessories like foil fl

Uploaded by

sasa.vukoje
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Wall entrance WD1F, sealed on one side, with FF-piece

Made from stainless steel

Connection flange: PN 10 flat flange bored in


compliance with DIN 2576.

Wall entrance, sealed on one side, with FF-piece, to


pass pipes through building walls, consisting of a welded
FF piece with wall flange, mould sealing, hexagon bolts,
plastic joints protecting the threads in the flanges and the
loose gasket with welded FF-piece, to connect the
continuing pipeline (which must be able to absorb axial
and radial forces).

Wall thickness of building

Medium pipe outside dia.

A=

DA* =

*[Specify either exact (measured) dimensions or


tolerances mm]

Installation flush with the formwork.

Wall entrance shielded arc-welded, acid-treated in a


pickling bath and passivated.
Special accessories available on request:

mm

With foil flange

mm

Modified flanges if consistent with required


installation conditions.

Sanded all sides for improved tightness in the


concreted area of the wall entrance.

Function:

ealing on one side against liquids and vermin/insects


Elastic in longitudinal direction to accommodate
assembly discrepancies

Sealing, food-safe, chlorine resistant.

Designed for temperatures up to 70 C and 12 m WG.

WASTE WATER Solutions

Order no.

Standard size
DN

Medium pipe
diameter (1)

WD 1F

100

97 - 122

WD 1F

200

WD 1F
WD 1F
WD 1F
WD 1F

80

77 - 102

150

147 - 175

250

247 - 283

300

Wall thickness
Flange
Sleeve pipe
A
diameter DF diameter DH
300

189

116

300

269

189

300

197 - 228

300
300

297 - 331

300

209
324
379
429

Dimensions in mm. For all other dimensions, see table WDT. (1) Including anti-corrosion coating and weld reinforcement

HUBER SE

Subject to technical modification


Drawing No. 190.207, 8.2010

Industriepark Erasbach A1 D-92334 Berching


Phone: + 49 - 84 62 - 201 - 0 Fax: + 49 - 84 62 - 201 - 810
[email protected] Internet: www.huber.de

136
242
297
345

Wall entrance WD1F, sealed on one side,


with FF-piece

FF-piece
L
150
150
150
150
200
200

You might also like