S&C Alduti-Rupter Switches

Outdoor Distribution (14.4 kV through 69 kV)

Specifications
Conditions of Sale
STANDARD: Sellers standard conditions of sale set
forth in Price Sheet 150 apply, except as modified under
WARRANTY QUALIFICATIONS on page2.

SPECIAL TO THIS PRODUCT:

INCLUSIONS: S&C Alduti-Rupter Switches are available
in a wide variety of styles and mounting configurations.
Three-Pole Integer Style switches are pre-engineered,
preassembled, and preadjustedall three poles are
mounted on a one-piece base with necessary electrical
clearances built in. The complete three-pole interrupter
switch assembly and its operating mechanism are provided
as a single package that includes removable lifting means,
shipped in place, for convenient rigging and hoisting during
installation.
Alduti-Rupter Switches are also available in three-pole
group-operated designs that feature pole-units mounted
on individual bases. Switches in these styles are especially
designed for installation on substation structures or
on overhead lines not suited to integer style switch
configurations.
Single-Pole Style switches are available in vertical and
inverted mounting configurations for use in single-phase
switching applications. Single-pole style switches are
operable using a conventional hookstick.
All three-pole Alduti-Rupter Switches are provided with
an operating mechanism that includes:
Three switch poles (integer style switches are shipped
complete with interphase drive, factory-assembled on
a single base).
A detailed erection drawing (ED) of the applicable
mounting arrangement.

Mounting Arrangements
S&C Three-Pole Alduti-Rupter Switches are available in
Standard Mounting Arrangements as described in S&C
Data Bulletin 761-80. Departures from Standard Mounting
Arrangements are also available and fall into three
categories:
1. Standard Minor Modifications of Standard Mounting
Arrangements are those which are so frequently
encountered that they are included on S&Cs basic erection drawings (ED). Applicability of Standard Minor
Modifications is listed in the table on page18. The applicable Standard Minor Modifications may be specified by
adding the appropriate -S suffix to the erection drawing (ED) number.
2. Special Minor Modifications of Standard Mounting
Arrangements are those which include such departures
as special base drillings or special mounting brackets
for operating-mechanism components. For this category of special, S&C will prepare a custom erection
drawing (ED) based on the Standard Mounting Arrangement erection drawing (ED). Switches will be supplied
with an operating mechanism for the Special Minor
Modification of a Standard Mounting Arrangement as
required.
3. Special Mounting Arrangements are those which
involve complete departures from the Standard Mounting Arrangements brought about by customizing an S&C
Alduti-Rupter Switch to fit the users structure. Custom
erection drawings (ED) will be provided as required.
EXCLUSIONS: Alduti-Rupter Switches do not include
connectors. Various connector arrangements are available
as listed in the table on page 20. When ordering, specify
the quantity and catalog number of connector arrangement
desired.

All required interphase and vertical operating pipe as

specified on the erection drawing (ED). Refer to the
tables on pages 6 through 16 for vertical operating pipe
included with each Standard Mounting Arrangement.
The appropriate set of operating-mechanism components; e.g., handle, rod guides, or guide bearings,
couplings, bell crank assembly, etc.
Complete installation instructions.

March 2, 2015
S&C Electric Company 1999-2015, all rights reseverd

Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Conditions of SaleContinued
SPECIFICATION DEVIATIONS: S&C Alduti-Rupter
Switches are offered with a choice of Cypoxy or porcelain
station post insulators. The standard insulator color is gray.
When switches are to be provided with special insulators
or special connectors, consult the nearest S&C Sales Office
for availability.
Switches of a given voltage rating (except the
Vertical-Break Style switches rated 25/34.5 kV or 34.5kV,
the Side-Break Integer Style, the Vertical-Break Integer
Style, the 46-kV Double-Break Integer Style, and the 69-kV
Double-Break Style) can be furnished with insulators of the
next higher voltage ratingadd suffix -Z3 to the catalog
number.
Single- and two-pole group-operated switches are
available.
Single-pole (Catalog Number Suffix -P1)
Two-pole (Catalog Number Suffix -P2).
Switches can be supplied with tin-plated terminal pads.
To specify, add suffix -Z5 to the catalog number.
POWER OPERATION: Power operation or, if desired,
remote supervisory control may be provided for S&C AldutiRupter Switches by the addition of the appropriate S&C
Type AS-1A, Type AS10, Type LS-2, or 6801M Automatic
Switch Operator.
S&C Switch OperatorTypes AS-1A and AS-10 are
for power operation of Alduti-Rupter Switches with
rotating-type and reciprocating-type operating mechanisms,
respectively. These switch operators are high-speed
operators, with operating times not exceeding .75second
and 1.2 seconds maximum, respectively. This high
operating speed provides sufficient moving-contact
velocity in the interrupters to ensure full interrupting
capability and long operating life. The operators high
operating speed also provides adequate closing velocity for
25/34.5-kV and 34.5-kV Three-Pole Side-Break Integer Style
and Three-Pole Vertical-Break Integer Style switches, as
well as 34.5-kV and 46-kV Three-Pole Double-Break Integer

2 S&C Specification Bulletin 761-31

Style switches to permit the assignment of fault-closing

ratings. Specifically, the Side-Break Integer Style switches
have a one-time duty-cycle fault-closing rating of 15,000
amperes, RMS, asymmetrical, the Vertical-Break Integer
Style switches have one-time duty-cycle fault-closing
ratings of 20,000 or 30,000 amperes, RMS, asymmetrical for
switches rated 600 amperes or 1200amperes, respectively,
and the Double-Break Integer Style switches have a
one-time duty-cycle fault closing rating of 18,000 amperes,
RMS, asymmetrical.
S&C 6801M Automatic Switch Operators are available in
two versionstorsional, for rotating-type mechanisms, and
reciprocating, for reciprocating-type operating mechanisms.
Both versions operate in .5 seconds. This high operating
speed is fully compatible with the moving-contact velocity
required by the interrupters to ensure full interrupting
capability for the applicable switch styles and mounting
arrangements. S&C Switch OperatorsType LS-2 are for
power operation of Three-Pole Double-Break Style AldutiRupter Switches rated 69 kV. Operating time for the 69-kV
switch when applied with an LS-2 Operator does not exceed
2.2 seconds.
Power operation is available for certain mounting
arrangements only. For integer style switches and
side-break standard-duty switches, mounting arrangements
suitable for power operation are indicated in the applicable
tables on pages 6 through 9, pages 11 through 13, and page
16. For all other switch styles, consult the nearest S&C Sales
Office for availability.
For additional details concerning S&C Switch Operator
Types AS-1A or AS-10, refer to Specification Bulletin
76931. For ordering information on Type LS-2 Switch
Operators, refer to Specification Bulletin 753-31. For
additional details concerning S&C 6801M Automatic Switch
Operators refer to Specification Bulletin1045M-31.
WARRANTY QUALIFICATIONS: The standard warranty
contained in S&Cs standard conditions of sale, as set forth
in Price Sheet 150, does not apply when Alduti-Rupter
Switches are power operated using a switch operator other
than S&C manufacture.

S&C Alduti-Rupter Switches

How to Order
1. Obtain the catalog number of the desired switch from
the tables on pages 6 through 17.
2. For three-pole Integer style switches, obtain the applicable erection drawing (ED) number for the desired
switch from the Mounting Arrangements column on
pages 6 through16. Otherwise refer to S&C Data Bulletin 761-80 for ED selection.
3. If a Standard Minor Modification for a three-pole switch
is desired, obtain the suffix of the desired modification
from the table on page 18. Add the suffix to the erection
drawing (ED) number of the switch.
4. If special minor modifications of standard mounting
arrangements or special mounting arrangements are
desired, refer to the Mounting Arrangements section
on page 1.
5. If specification deviations are desired, such as switches
furnished with special connectors; switches furnished
with special insulators, with insulators of the next lower
or higher voltage rating, or less insulators; or switches
furnished less bases, refer to the Specification Deviations section on page2.
6. If a mounting pedestal is desired for either a VerticalBreak integer style switch or a Double-Break integer
style switch, obtain the catalog number of desired
mounting pedestal from page17. From this same table,
obtain the catalog number of the required anchor bolts.
Order four anchor bolts per switch.

7. If accessories are desired, obtain the suffix of the

desired accessory from page 19. Add the suffix to the
switch catalog number.
8. If switch automation is desired, automation components can be ordered by obtaining the suffix of the
desired component from the table on page19. Add the
suffix to the switch catalog number.
9. If connectors are desired, obtain the catalog number of
the desired connector from page20.
Note: If power operation or remote supervisory control
are desired, S&C Type AS-1A, Type AS-10, Type LS-2,
or 6801M Automatic Switch Operator may be added to
switches in certain mounting arrangements. For integer
style switches and side-break standard-duty switches,
mounting arrangements suitable for power operation are
indicated in the applicable tables on pages 6 through 9,
pages11 through 13, and page16. For ordering information
on S&C Switch OperatorTypes AS-1A and AS-10 see
Specification Bulletin769-31. For ordering information on
Type LS-2 Switch Operators, refer to Specification Bulletin
753-31. For ordering information on S&C 6801M Automatic
Switch Operators see Specification Bulletin1045M-31.
Note: Spare or replacement parts are ordered using the
same method outlined above.

S&C Specification Bulletin 761-31 3

S&C Alduti-Rupter Switches

Application Classifications (See symbols on pages 6 through 17)
Symbol

Application

Class

Qualifications

Parallel
Switching

Transformer
Switching

Load Dropping
and
Magnetizing
Current
Switching

Cable
Switching

Load Dropping

Single-Pole Switch
Solidly or
EffecUngrounded
tively
System
Grounded
System

Three-Pole Switch
Solidly or
Effectively
Grounded
System

Ungrounded
System

600

Three-phase transformer (or three-phase bank

of single-phase transformers) connected solidly
grounded-wye on the primary (switch) side and
delta on the secondary side

All other connections of three-phase transform

ers (or three-phase banks of single-phase trans
formers)including autotransformers

Single-phase transformer connected phase-toground on the primary (switch) side

Single-phase transformer connected phase-tophase on the primary (switch) side

600/1200

Three-phase circuits with all load-side threephase transformers (or three-phase banks of
single-phase transformers) connected solidly
grounded-wye on the primary (switch) side and
delta on the secondary side, and all load-side
single-phase transformers connected phase-toground on the primary (switch) side

600/1200

Three-phase circuits with load-side transformers

connected other than as described above

600/1200

Single-phase circuits with all load-side trans

formers connected phase-to-ground on the
primary (switch) side

600/1200

Single-phase circuits with load-side

transformers connected other than as described
above

600/1200

Load Splitting
(Parallel or Loop
Switching)

Line
Switching

Maximum
Interrupting
Duty,
Amperes,
RMS

Line Dropping

Load Splitting

600/1200

Three-phase circuits with all load-side threephase transformers (or three-phase banks of
single-phase transformers) connected solidly
grounded-wye on the primary (switch) side and
delta on the secondary side, and all load-side
single-phase transformers connected phase-toground on the primary (switch) side

600/1200

Three-phase circuits with load-side transformers

connected other than as described above

600/1200

Single-phase circuits with all load-side trans

formers connected phase-to-ground on the
primary (switch) side

600/1200

Single-phase circuits with load-side

transformers connected other than as described
above

600/1200

Shielded cable

Unshielded cable

Grounded capacitor bank

Ungrounded capacitor bank

Load Dropping

Cable Dropping
(charging current)
Capacitor Bank Switching,
Single Bank Only

FOR FOOTNOTES SEE BOTTOM OF PAGE 5

4 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Conditional Applications (See symbols in parentheses on pages 6 through 17)
Alduti-Rupter Switch
Style

Voltage
Rating, kV

Application
Symbol

K
34.5
L

Three-Pole Double-Break
Three-Pole Double-Break Integer

K
46

Three-Pole Vertical-Break
Three-Pole Vertical-Break Integer
and
Three-Pole Side-Break (Heavy-Duty,
Standard-Duty, and Integer)

Single-Pole Heavy-Duty

60 amperes
Line dropping only

Over 15.5 and up through 20.0

60 amperes

Over 20.0 and up through 38.0

Line dropping only

Over 15.5 and up through 31.7

60 amperes

Over 31.7 and up through 48.3

Line dropping only

60 amperes
Line dropping only

Over 12.0 and up through 17.0

Line dropping only

Over 22.0 and up through 27.0

Over 15.5 and up through 22.8

60 amperes

Over 22.8 and up through 27.0

Over 15.5 and up through 19.0

Cable and line dropping only

Over 19.0 and up through 27.0

Line dropping only

Over 12.0 and up through 27.0

Line dropping only

Over 22.0 and up through 29.0

Over 29.0 and up through 38.0

Over 15.5 and up through 17.0

Line dropping only

Over 22.0 and up through 27.0

600 amperes
60 amperes

K
L

14.4

Over 15.5 and up through 31.7

Over 31.7 and up through 38.0

Over 15.5 and up through 20.0

25

25/34.5
34.5

Maximum Interrupting Duty

Over 20.0 and up through 48.3

L
14.4

Maximum Operating Voltage

Line-to-Line, kV

H
25
K
L

Where maximum operating voltage for a conditional application is

lower than the lowest range listed, refer to table on page 4 for applicable
maximum interrupting duty values.

1200 amperes load dropping for switches rated 1200 amperes

continuous where the system is solidly grounded and not less than
50% of the load is served by transformers connected according to the
qualifications of application E (see table on page 4); 900 amperes
load dropping for switches rated 1200 amperes continuous in all other
applications. Alduti-Rupter Switches will switch magnetizing currents
associated with these loads.

Three-Pole Vertical-Break, Three-Pole Side-Break Heavy-Duty, Three-

Over 15.5 and up through 22.8

Over 22.8 and up through 27.0

Over 15.5 and up through 19.0

Cable and line dropping only

Over 19.0 and up through 27.0

Line dropping only

Over 15.5 and up through 27.0

Line dropping only

cable, or 1.2 miles of 1000 kc mil cable, or equivalent, provided phase

spacing is 55 inches minimum and mounting configuration is upright
or vertical. Three-Pole Side-Break Integer Styles, Catalog Numbers
137813R8, 137813R8-E, 137623R8, and 137623R8-E may also be so
applied.

900 amperes load dropping for switches rated 1200 amperes

continuous. Alduti-Rupter Switches will switch magnetizing currents

associated with these loads.

Applies to load dropping. Alduti-Rupter Switches will switch

magnetizing currents associated with these loads.

Pole Side-Break Standard-Duty, and Single-Pole Heavy-Duty Styles may

be applied for cable dropping (charging current) of 3 miles of No. 1/0

FOOTNOTES FOR TABLE ON PAGE 4

Lower values may apply for conditional applications. Refer to

Conditional Applications table above.

X0/X1 from 0 to + 3.0 and R0/X1 from 0 to + 1.0.

Applies to switching of the primary of a transformer which remains

energized from the secondary bus, or to disconnecting of a loaded

secondary bus from one of two transformers supplying that bus while the
primary side of the transformer remains energized.
For higher current applications, contact your nearest S&C Sales
Office.

Alduti-Rupter Switches will drop loads through 600 or 1200 amperes,

depending upon their continuous rating, and will switch magnetizing

currents associated with such loads.

Alduti-Rupter Switches rated 2400 amperes continuous will drop loads

of 1600 amperes and switch all associated magnetizing currents.

Depending upon continuous rating of switch.

20 miles of line for all Vertical-Break Integer Style switches and for
Vertical-Break Style, Side-Break Heavy-Duty Style, and Side-Break
Integer Style switches rated 25/34.5 kV and 34.5 kV where maximum
operating voltage (line-to-line) exceeds 29.0 kV; 100 miles (160 km) of
line for these and all other switches where maximum operating voltage
does not exceed 29.0 kV.

12 miles (19 km) of No. l/0 cable, or 5 miles (8 km) of 1000 kc mil

(673 mm2) cable, or equivalent, for all Vertical-Break Integer Style

switches and for Vertical-Break Style, Side-Break Heavy-Duty Style, and
Side-Break Integer Style switches rated 25/34.5 kV and 34.5 kV; 80 miles
(130 km) of No. 1/0 cable, or 30 miles (50 km) of 1000 kc mil (673 mm2)
cable, or equivalent, for all other switches.

For all Vertical-Break Integer Style switches and for all Vertical-Break

Style, Side-Break Heavy-Duty Style, and Side-Break Integer Style

switches rated 25/34.5 kV and 34.5 kV, contact your nearest S&C Sales
Office; 100 amperes for all other switches.

S&C Specification Bulletin 761-31 5

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Side-Break Integer Style, with steel bases
Station Post Insulators

Rating
Mounting
Configuration

Vertical Clockwise
Opening

Mounting
Arrangements

ED-140R21

kV
Nom.

Max

14.4
25

Amperes, RMS
InterMom.
rupting (Asym.)

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

BIL

Cont.

17.0

110

1200

1200

40 000

AEGHK(L)

137612R6-E

137612R6

27

150

1200

1200

40 000

AE(GHKL)

137613R9-E

137613R9

25/34.5

38

150

600

600

40 000

AEGHKL

137167R1-E

137167R1

34.5

38

200

600

600

40 000

AEGHKL

137164R1-E

137164R1

34.5

38

200

1200

1200

40 000

AE(G)HKL

147164-E

147164

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

137412R8-E

137412R8

25

27

150

1200

1200

40 000

AE(GHKL)

137413R9-E

137413R9

25/34.5

38

150

600

600

40 000

AEGHKL

137367R3-E

137367R3

34.5

38

200

600

600

40 000

AEGHKL

137364R3-E

137364R3

34.5

38

200

1200

1200

40 000

AE(G)HKL

147364-E

147364

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

138412R2-E

138412R2

25

27

150

1200

1200

40 000

AE(GHKL)

138413R2-E

138413R2

Page
Reference for
Dimensional
Information

22
ED-672R4

Upright Clockwise
Opening

ED-136R20

ED-667R3

Upright Clockwise
Opening
(Extra MountingPole Clearance)

ED-136R20

24

26

24

Upright
Counterclockwise
Opening

ED-135R20

ED-669R3

Tiered Outboard
Clockwise
Opening

ED-144R19

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

137512R8-E

137512R8

25

27

150

1200

1200

40 000

AE(GHKL)

137513R9-E

137513R9

25/34.5

38

150

600

600

40 000

AEGHKL

137467R3-E

137467R3

34.5

38

200

600

600

40 000

AEGHKL

137464R3-E

137464R3

34.5

38

200

1200

1200

40 000

AE(G)HKL

147464-E

147464

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

137812R7-E

137812R7

25

27

150

1200

1200

40 000

AE(GHKL)

137813R9-E

137813R9

25/34.5

38

150

600

600

40 000

AEGHKL

137767R3-E

137767R3

34.5

38

200

600

600

40 000

AEGHKL

137764R3-E

137764R3

34.5

38

200

1200

1200

40 000

AE(G)HKL

147764-E

147764

26

28
ED-676R3

FOR FOOTNOTES SEE PAGE 7

6 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

The switches shown include the appropriate set of operating-

Bracket assemblies for mounting either three or six surge arresters

The applicable Standard Mounting Arrangement, designated by the

This switch has a one-time duty-cycle fault-closing rating of

15,000 amperes, RMS, asymmetrical when operated by the applicable
S&C Switch Operatoror a one-time duty-cycle fault-closing capability
of 15,000 amperes, RMS, asymmetrical as a manually operated switch
(without quick-make mechanism, and when operated vigorously through
its full travel without hesitation at any point). These values represent the
level of available fault current into which the switch can be closed once,
with the switch remaining operable and able to carry and interrupt
rated continuous current.

mechanism components as specified on the erection drawing (ED) for

the switch. Switches do not include connectors (refer to table on page 20).

erection drawing (ED) number shown, should be specified when ordering.

The -S suffixes in parentheses identify available Standard Minor
Modifications to the basic erection drawing (ED). The applicable Standard
Minor Modifications may be specified by adding the appropriate suffix
to the erection drawing (ED) number. Refer to page 18 for description.
Special Minor Modifications and Special Mounting Arrangements are not
available for these switches.
Refer to the ED drawings for mounting dimensions and heights.
The 3-second rating is 25,000 amperes, RMS, symmetrical.
Applications indicated by symbols in parentheses are conditional.

Refer to "Conditional Applications" table, page 5.

Optional crossarm braces SDA103671 are recommended for

switches in the vertical mounting configuration and SDA-10367 for

switches in the upright mounting configuration.
These switches include dead-ending brackets as standard. Extension-

link assemblies can be provided by adding suffix -D to the catalog

number of the switch. Maximum dead-end loading: 2000 pounds
(900 kg) per conductor where pull-off forces are applied to only one side
of the switch; 8000 pounds (3600 kg) per conductor where equal pull-off
forces are applied to both sides of the switch.

can be provided by adding suffix -A1 or -A2, respectively, to the catalog

number of the switch.

Applicable at 34.5 kV where leakage distance to ground meets users

requirements. For 25/34.5-kV Cypoxy station post insulators the leakage
distance is 26inches (667 mm).
This switch includes two-hole terminal pads as standard. If four-bolt
connectors are required, specify the two-to-four bolt adapter Catalog
Number MDA-1162-1 and the four-bolt connector Catalog Number
4569R1-B. Refer to the "Connectors" table on page 20 for more
information.

S&C Specification Bulletin 761-31 7

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Side-Break Integer Style, with insulated bases
Station Post Insulators

Rating
Mounting
Configuration

Vertical
Clockwise
Opening

Mounting
Arrangements

ED-640R5

kV
Nom.

Max

14.4
25

Amperes, RMS
InterMom.
rupting (Asym.)

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

BIL

Cont.

17.0

110

1200

1200

40 000

AEGHK(L)

137192R2-E

137192R2

27

150

1200

1200

40 000

AE(GHKL)

137193R9-E

137193R9

34.5

38

200

600

600

40 000

AEGHKL

137194R1-E

137194R1

34.5

38

200

1200

1200

40 000

AE(G)HKL

147194-E

147194

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

137392R2-E

137392R2

25

27

150

1200

1200

40 000

AE(GHKL)

137393R9-E

137393R9

34.5

38

200

600

600

40 000

AEGHKL

137394R1-E

137394R1

34.5

38

200

1200

1200

40 000

AE(G)HKL

147394-E

147394

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

138392R2-E

138392R2

25

27

150

1200

1200

40 000

AE(GHKL)

138393R2-E

138393R2

Page
Reference for
Dimensional
Information

22
ED-642R4

Upright
Clockwise
Opening

ED-636R4

ED-637R3

Upright
Clockwise
Opening
(Extra MountingPole Clearance)

ED-636R4

24

26

24

Upright
Counterclockwise
Opening

ED-635R4

ED-639R3

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

137492R2-E

137492R2

25

27

150

1200

1200

40 000

AE(GHKL)

137493R9-E

137493R9

34.5

38

200

600

600

40 000

AEGHKL

137494R1-E

137494R1

34.5

38

200

1200

1200

40 000

AE(G)HKL

147494-E

147494

14.4

17.0

110

1200

1200

40 000

AEGHK(L)

137792R2-E

137792R2

25

27

150

1200

1200

40 000

AE(GHKL)

137793R9-E

137793R9

26

Tiered Outboard
Clockwise
Opening
ED-644R2

28

FOR FOOTNOTES SEE PAGE 9

8 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

The switches shown include the appropriate set of operating-

mechanism components as specified on the erection drawing (ED)

for the switch. Switches do not include connectors (refer to table on
page 20).

Base is a fiberglass-reinforced pultruded structural tube especially

constructed for high strength and is finished with a coat of gray

polyurethane enamel.

Fiberglass interphase shaft is standard with this style.

The applicable Standard Mounting Arrangement, designated by the

erection drawing (ED) number shown, should be specified when ordering.

The -S suffixes in parentheses identify available Standard Minor
Modifications to the basic erection drawing (ED). The applicable Standard
Minor Modifications may be specified by adding the appropriate suffix
to the erection drawing (ED) number. Refer to page 18 for description.
Special Minor Modifications and Special Mounting Arrangements are not
available for these switches.

Refer to ED drawings for mounting dimensions and heights.

The 3-second rating is 25,000 amperes, RMS, symmetrical.
Applications indicated by symbols in parentheses are conditional.

Refer to Conditional Applications table, page 5.

Optional crossarm braces SDA-10367-1 are recommended for

switches in the vertical mounting configuration and SDA-10367 for

switches in the upright mounting configuration. Crossarm provisions 5053
are available when crossarms are supplied by the customer.

Bracket assemblies for mounting either three or six surge arresters

can be provided by adding suffix -A1 or -A2, respectively, to the catalog

number of the switch.

For provisions only for dead-ending, add suffix -C to the catalog

number of the switch. Maximum dead-end loading: 700 pounds (315 kg)
per conductor where pull-off forces are applied to only one side of the
switch; 8000 pounds (3600 kg) per conductor where equal pull-off forces
are applied to both sides of the switch. Also specify, if required, one set of
six extension-link assemblies by adding suffix -D to the catalog number
of the switch; i.e. Catalog Number 137392R1-CD.
This switch includes two-hole terminal pads as standard. If four-bolt
connectors are required, specify the two-to-four bolt adapter Catalog
Number MDA-1162-1 and the four-bolt connector Catalog Number
4569R1-B. Refer to the table on page 20 for more information.
This switch has a one-time duty-cycle fault-closing rating of 15,000
amperes, RMS, asymmetrical when operated by the applicable S&C
Switch Operatoror a one-time duty-cycle fault-closing capability of
15,000 amperes, RMS, asymmetrical as a manually operated switch
(without quick-make mechanism, and when operated vigorously through
its full travel without hesitation at any point). These values represent the
level of available fault current into which the switch can be closed once,
with the switch remaining operable and able to carry and interrupt rated
continuous current.

S&C Specification Bulletin 761-31 9

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Side-Break Heavy-Duty Style
Station Post Insulators

Rating
Illustration

Mounting
Configuration

kV

Amperes, RMS

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

BIL

Cont.

Interrupting

Mom.
(Asym.)

17.0

110

600

600

40 000

AEGHK(L) 137012R3-E

137012R3

27

150

600

600

40 000

AEG(HKL) 137013R7-E

137013R7

34.5

38

200

600

600

40 000

AEGHKL

138114R1

34.5

38

200

1200

1200

40 000

AE(G)HKL 158114-E

158114

Vertical or Upright
Counterclockwise
Opening

14.4

17.0

110

600

600

40 000

AEGHK(L) 137212R3-E

137212R3

25

27

150

600

600

40 000

AEG(HKL) 137213R7-E

137213R7

Upright
Counterclockwise
Opening

34.5

38

200

600

600

40 000

AEGHKL

138314R1

34.5

38

200

1200

1200

40 000

AE(G)HKL 158314-E

Nom.

Max

Vertical or Upright
Clockwise Opening

14.4
25

Upright
Clockwise Opening

The switches shown include the appropriate set of operating-

mechanism components as specified on the erection drawing (ED)

for the switch. Switches do not include connectors (refer to table on
page 20).

Switches are available in a variety of Standard Mounting Arrangements,

designated by erection drawing (ED) number, as described in Data

Bulletin 761-80. Specify the applicable erection drawing (ED) number
when ordering.

Refer to ED drawings for mounting dimensions and heights.

The 3-second rating is 25,000 amperes, RMS, symmetrical.
Applications indicated by symbols in parentheses are conditional.

Refer to "Conditional Applications" table, page 5.

10 S&C Specification Bulletin 761-31

138114R1-E

138314R1-E

158314

Page
Reference for
Dimensional
Information

30

31

30

31

Standard

Minor Modifications of the Standard Mounting

Arrangement(s) for these switches are listed in the table on page 18. The
applicable Standard Minor Modifications listed therein may be specified
by adding the appropriate S suffix to the erection drawing (ED) number.
Refer to page 1 for Special Minor Modifications and Special Mounting
Arrangements for these switches.

Three-Pole Side-Break Heavy-Duty style switches rated 34.5 kV, while

provided with design features for fault closing, are not assigned faultclosing ratings or capabilities because special mounting arrangements
may deny the requisite high-speed closing behavior.

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Side-Break Standard-Duty Style
Station Post Insulators

Rating
Illustration

Mounting
Configuration

Upright
Counterclockwise
Opening

kV

Amperes, RMS

Nom. Max

BIL

Cont.

Interupting

Mom.
(Asym.)

14.4 17.0

110

600

600

40 000

The switches shown include the appropriate set of operating-

mechanism components as specified on the erection drawing (ED) for

the switch. Switches do not include connectors (refer to table on page 20).

Switches are available in a variety of Standard Mounting Arrangements,

designated by erection drawing (ED) number, as described in Data

Bulletin 761-80. Specify the applicable erection drawing (ED) number
when ordering.

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

Page
Reference for
Dimensional
Information

AEGHK(L)

137232R1-E

137232R1

32

Refer to ED drawings for mounting dimensions and heights.

The 3-second rating is 25,000 amperes, RMS, symmetrical.
Applications indicated by symbols in parentheses are conditional.

Refer to table, page 5.

S&C Specification Bulletin 761-31 11

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Vertical-Break Integer Style
Station Post Insulators

Rating
Mounting
Configuration

Mounting
Arrangements

Pedestal
ED-151R1

kV

Amperes, RMS

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

Nom.

Max

BIL

Cont.

Interrupting

Mom.
(Asym.)

25/34.5

38

150

600

1600

40 000

AE(G)HKL

135614R2-E

135614R2

25/34.5

38

150

1200

1200

40 000

AE(G)HKL

135814R2-E

135814R2

34.5

38

200

600

600

40 000

AEGHKL

135714R2-E

135714R2

34.5

38

200

1200

1200

40 000

AE(G)HKL

135914R2-E

135914R2

25/34.5

38

150

600

600

40 000

AEGHKL

135624R2-E

135624R2

25/34.5

38

150

1200

1200

40 000

AE(G)HKL

135824R2-E

135824R2

34.5

38

200

600

600

40 000

AEGHKL

135724R2-E

135724R2

34.5

38

200

1200

1200

40 000

AE(G)HKL

135924R2-E

135924R2

25/34.5

38

150

600

600

40 000

AEGHKL

135634R2-E

135634R2

25/34.5

38

150

1200

1200

40 000

AE(G)HKL

135834R2-E

135834R2

34.5

38

200

600

600

40 000

AEGHKL

135734R2-E

135734R2

34.5

38

200

1200

1200

40 000

AE(G)HKL

135934R2-E

135934R2

25/34.5

38

150

600

600

40 000

AEGHKL

135644R2-E

135644R2

25/34.5

38

150

1200

1200

40 000

AE(G)HKL

135844R2-E

135844R2

34.5

38

200

600

600

40 000

AEGHKL

135744R2-E

135744R2

34.5

38

200

1200

1200

40 000

AE(G)HKL

135944R2-E

135944R2

25/34.5

38

150

600

600

40 000

AEGHKL

135654R2-E

135654R2

34.5

38

200

600

600

40 000

AEGHKL

135754R2-E

135754R2

34.5

38

200

1200

1200

40 000

AE(G)HKL

135954R2-E

135954R2

25/34.5

38

150

600

600

40 000

AEGHKL

135664R2-E

135664R2

34.5

38

200

600

600

40 000

AEGHKL

135764R2-E

135764R2

34.5

38

200

1200

1200

40 000

AE(G)HKL

135964R2-E

135964R2

Page
Reference for
Dimensional
Information

33

Pole-Top

ED-152R3

Upright
ED-153R5

Vertical
ED-154R5

34

35

36

Tiered
Outboard

ED-155R6

37

Triangular

ED-156R5

38

FOR FOOTNOTES SEE PAGE 13

12 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

The switches shown include the appropriate set of operating-

mechanism components as specified on the erection drawing (ED)

for the switch. Switches do not include connectors (refer to table on
page 20).

The applicable Standard Mounting Arrangement, designated by the

erection drawing (ED) number shown, should be specified when ordering.

The -S suffixes in parentheses identify available Standard Minor
Modifications to the basic erection drawing (ED). The applicable Standard
Minor Modifications may be specified by adding the appropriate suffix
to the erection drawing (ED) number. Refer to page 18. Special Minor
Modifications and Special Mounting Arrangements are not available for
these switches.

Refer to ED drawings for mounting dimensions and heights.

The 3-second rating for 600- and 1200-ampere switches is 25,000

amperes, RMS, symmetrical.

The one-time duty-cycle fault closing capability for a manually

operated Three-Pole Vertical-Break Integer Style switch (without quickmake mechanism, and when operated vigorously through its full travel
without hesitation at any point) for 600ampere and 1200-ampere
switches is 20,000 amperes and 30,000amperes, RMS, asymmetrical,
respectively. The one-time duty-cycle fault-closing rating for 600-ampere
and 1200-ampere switches is 20,000 amperes and 30,000 amperes,
RMS, asymmetrical, respectively, when switches are operated by the
applicable S&C Switch Operator. The one-time duty-cycle fault-closing
rating defines the level of available fault current into which the switch can
be closed once, with the switch remaining operable and able to carry and
interrupt rated continuous current.

Applications indicated by symbols in parentheses are conditional.

Refer to "Conditional Applications" table on page 5.

No provisions for dead-ending are offered since the mounting

pedestals are not intended for such duty.

Select mounting pedestal from table on page 17.

These switches include dead-ending brackets as standard. Maximum

dead-end loading: 2000 pounds (900 kg) per conductor where pull-off
forces are applied to only one side of the switch; 8000 pounds (3600 kg)
per conductor where equal pull-off forces are applied to both sides of
the switch. If required, order one set of six extension-link assemblies by
adding suffix -D to the catalog number of the switch.

Bracket assemblies for mounting either three or six surge arresters

can be provided by adding suffix -A1 or -A2, respectively, to the catalog

number of the switch.

Optional crossarm braces SDA-10367-1 are recommended for

switches in the vertical mounting configuration and SDA-10367 for

switches in the upright mounting configuration.
Applicable at 34.5 kV where leakage distance to ground meets users
requirements. For 25/34.5-kV Cypoxy station post insulators the leakage
distance is 26 inches (667 mm).

S&C Specification Bulletin 761-31 13

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Vertical-Break Style
Station Post Insulators

Rating
Illustration

Mounting
Configuration

Vertical or
Upright

Vertical

Upright

kV

Amperes, RMS
InterMom.
rupting (Asym.)

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

Nom.

Max

BIL

Cont.

14.4

17.0

110

600

600

40 000

AEGHK(L)

135012R4-E

135012R4

14.4

17.0

110

1200

1200

61 000

AEGHK(L)

320222R9-E

320222R9

25

27

150

600

600

40 000

AEG(HKL)

135013R5-E

135013R5

25

27

150

1200

1200

61 000

AE(GHKL)

320223R9-E

320223R9

14.4

17.0

200

2400

1600

40 000

AEGHKL

135072R2-E 135072R2

25/34.5

38

150

1200

1200

40 000

AE(G)HKL

135894R3-E

135894R3

34.5

38

200

600

600

40 000

AEGHKL

135794R3-E

135794R3

34.5

38

200

1200

1200

40 000

AE(G)HKL

135994R3-E

135994R3

14.4

17.0

200

2400

1600

40 000

AEGHKL

135092R2-E 135092R2

25/34.5

38

150

1200

1200

40 000

AE(G)HKL

135874R3-E

135874R3

34.5

38

200

600

600

40 000

AEGHKL

135774R3-E

135774R3

34.5

38

200

1200

1200

40 000

AE(G)HKL

135974R3-E

135974R3

Page
Reference for
Dimensional
Information

39

40
41

40
41

The switches shown include the appropriate set of operating-

Three-Pole Vertical-Break Style switches rated 25/34.5 kV and

Switches are available in a variety of Standard Mounting Arrangements,

These switches can be applied at system voltages above 17.0 kV

mechanism components as specified on the erection drawing (ED)

for the switch. Switches do not include connectors (refer to table on
page20).
designated by erection drawing (ED) number, as described in Data
Bulletin 761-80. Specify the applicable erection drawing (ED) number
when ordering.

Refer to ED drawings for mounting dimensions and heights.

The 3-second ratings at 14.4 kV and 25 kV for 600- and 1200-ampere

34.5 kV, while provided with design features for fault closing, are not
assigned fault-closing ratings or capabilities because special mounting
arrangements may deny the requisite high-speed closing behavior.

where 2400 ampere continuous current rating is required. Application

Classifications AE(G)HKL for 34.5-kV switches rated 1200 amperes
continuous apply. Refer to Applications Classifications table on page 4.
Applications indicated by symbols in parenthesis are conditional; refer to
the Conditional Applications table on page 5.

switches are 25,000 and 40,000 amperes, RMS, symmetrical, respectively,

except for the 25/34.5kV and 34.5-kV switches which have a 3-second
rating of 25,000 amperes, RMS, symmetrical.

Tin-plated terminal pads (option suffix Z5) are not available with

Applications indicated by symbols in parentheses are conditional.

Applicable at 34.5 kV where leakage distance to ground meets users

Refer to Conditional Applications table, page 5.

Standard

Minor Modifications of the Standard Mounting

Arrangement(s) for these switches are listed in the table on page 18. The
applicable Standard Minor Modifications listed therein may be specified
by adding the appropriate S suffix to the erection drawing (ED) number.
Refer to page 1 for Special Minor Modifications and Special Mounting
Arrangements for these switches.

14 S&C Specification Bulletin 761-31

switches rated 2400 amperes continuous. Terminal pads on these switch

models are silver-plated as standard.
requirements. For 25/34.5-kV Cypoxy station post insulators the leakage
distance is 26 inches (667 mm).

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Double-Break Style
Station Post Insulators

Rating
Illustration

Mounting
Configuration

Vertical or
Upright

kV
Nom.

Max

Amperes, RMS
BIL

Cont.

Interrupting

Mom.
(Asym.)

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

Page Reference
for Dimensional
Information

34.5

38

200

600

600

40 000

AEGH(KL)

320304R10-E

320304R10

46

48.3

250

600

600

40 000

AEG(KL)

320305R10-E

320305R10
42

Inverted

Vertical or
Upright

Vertical,
Upright, or
Tiered

34.5

38

200

600

600

40 000

AEGH(KL)

320404R10-E

320404R10

46

48.3

250

600

600

40 000

AEG(KL)

320405R10-E

320405R10

34.5

38

200

600

600

40 000

AEGH(KL)

320304R10-G-E 320304R10-G

46

48.3

200

600

600

40 000

AEG(KL)

320305R10-G-E 320305R10-G

69

72.5

350

1200

600

40 000

AEG

The switches shown include the appropriate set of operating-

mechanism components as specified on the erection drawing (ED)

for the switch. Switches do not include connectors (refer to table on
page 20).

Switches are available in a variety of Standard Mounting Arrangements,

N/A

320306

43

44

Standard

Minor Modifications of the Standard Mounting

Arrangement(s) for these switches are listed in the table on page 18. The
applicable Standard Minor Modifications listed therein may be specified
by adding the appropriate S suffix to the erection drawing (ED) number.
Refer to page 1 for Special Minor Modifications and Special Mounting
Arrangements for these switches.

designated by erection drawing (ED) number, as described in Data

Bulletin 761-80. Specify the applicable erection drawing (ED) number
when ordering.

Switches with a -G suffix are furnished with a grounding switch.

Refer to ED drawings for mounting dimensions and heights.

Switches rated 69 kV may be power-operated using S&C Type LS-2

The 3-second rating is 25,000 amperes, RMS, symmetrical.

Special EDs are requiredcontact your nearest S&C Sales Office.

Switch Operator.

Three-Pole Double-Break Style switches rated 34.5 kV and 46 kV,

while provided with design features for fault closing, are not assigned fault
closing ratings or capabilities because special mounting arrangements
may deny the requisite high-speed closing behavior.

Applications indicated by symbols in parentheses are conditional.

Refer to Conditional Applications table, page 5.

S&C Specification Bulletin 761-31 15

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesThree-Pole Double-Break Integer Style
Rating
Mounting
Configuration

Mounting
Arrangements

kV

Amperes, RMS
InterMom.
rupting (Asym.)

Applications
(see pages
4 and 5)

Station Post Insulators

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

Page
Reference for
Dimensional
Information

Nom.

Max

BIL

Cont.

ED-160R1

46

48.3

250

600

600

40 000

AEG(KL)

320335-E

320335

45

ED-161

46

48.3

250

600

600

40 000

AEG(KL)

320345-E

320345

46

ED-162

46

48.3

250

600

600

40 000

AEG(KL)

320355-E

320355

47

ED-163R1

46

48.3

250

600

600

40 000

AEG(KL)

320365-E

320365

48

ED-164R1

46

48.3

250

600

600

40 000

AEG(KL)

320375-E

320375

49

Upright

Vertical

Tiered
Outboard

Pole-Top

Pedestal

The switches shown include the appropriate set of operating-

mechanism components as specified on the erection drawing (ED)

for the switch. Switches do not include connectors (refer to table on
page 20).

The applicable Standard Mounting Arrangement, designated by the

erection drawing (ED) number shown, should be specified when ordering.

The -S suffixes in parentheses identify available Standard Minor
Modifications to the basic erection drawing (ED). The applicable Standard
Minor Modifications may be specified by adding the appropriate suffix
to the erection drawing (ED) number. Refer to page 18 for description.
Special Minor Modifications and Special Mounting Arrangements are not
available for these switches.

Refer to ED drawings for mounting dimensions and heights.

The 3-second rating is 25,000 amperes, RMS, symmetrical.

The one-time duty-cycle fault closing capability for a manually

operated switch when operated vigorously through its full travel without
hesitation at any point is 18,000 amperes, RMS, asymmetrical.

16 S&C Specification Bulletin 761-31

Applications indicated by symbols in parentheses are conditional.

Refer to Conditional Applications table, page 5.

These switches include dead-ending brackets as standard. Maximum

dead-end loading: 2000 pounds (900 kg) per conductor where pull-off
forces are applied to only one side of the switch; 8000 pounds (3600 kg)
per conductor where equal pull-off forces are applied to both sides of
the switch. If required, order one set of six extension-link assemblies by
adding suffix -D to the catalog number of the switch.

These switches can be supplied with Lindsey current sensor(s),

auxiliary switch, and control cable. Refer to Automation Components

table on page 19.

No provisions for dead-ending are offered since the mounting

pedestals are not intended for such duty.

Select mounting pedestal from table on page 17.

S&C Alduti-Rupter Switches

Alduti-Rupter SwitchesSingle-Pole Heavy-Duty Style
Station Post Insulators

Rating
Illustration

Mounting
Configuration

kV

Amperes, RMS
InterMom.
rupting (Asym.)

Applications
(see pages
4 and 5)

Cypoxy
Catalog
Number

Porcelain
Catalog
Number

Nom.

Max

BIL

Cont.

14.4

17.0

110

600

600

40 000

AEGHK(L)

136012-E

136012

14.4

17.0

110

1200

1200

61 000

AEGHK(L)

320022R9-E

320022R9

25

27

150

600

600

40 000

AEG(HKL)

136013R1-E

136013R1

25

27

150

1200

1200

61 000

AE(GHKL)

320023R10-E

320023R10

14.4

17.0

110

600

600

40 000

AEGHK(L)

136112R5-E

136112R5

14.4

17.0

110

1200

1200

61 000

AEGHK(L)

320122R9-E

320122R9

25

27

150

600

600

40 000

AEG(HKL)

136113R1-E

136113R1

25

27

150

1200

1200

61 000

AE(GHKL)

320123R10-E

320123R10

Vertical

Page Reference
for Dimensional
Information

50

Inverted

Applications indicated by symbols in parentheses are conditional.

Switches do not include connectors (refer to table on page 20).

The 3-second ratings for 600- and 1200-ampere switches are 25,000

Refer to "Conditional Applications" table, page 5.

and 40,000 amperes, RMS, symmetrical, respectively.

Mounting PedestalsFor Alduti-Rupter Switches

Item

Mounting Pedestal (one per switch), for Vertical-Break

Integer style switches, square steel tube construction,
galvanized finish

Mounting Pedestal (one per switch), for Double-Break

Integer style switches, square steel tube construction,
galvanized finish

Column
Section,
Inches
(mm)

Column
Height,
Feet
(mm)

Catalog Number

88
(203 203 mm)

8 (2438)
9 (2743)
10 (3048)
11 (3353)
12 (3658)

92426R1-G
92427R1-G
92428R1-G
92429R1-G
92434R1-G

88
(203203 mm)

8 (2438)
9 (2743)
10 (3048)
11 (3353)
12 (3658)

92426R1-GI
92427R1-GI
92428R1-GI
92429R1-GI
92434R1-GI

Intermediate heights [less than 12 feet (3658 mm)] are available in

3-inch (76.2 mm) increments. Specify by adding one of the following

suffixes to the catalog number of the mounting pedestal of nearest lower
height.
-S3 Three inches (76 mm) additional height
-S6 Six inches (152 mm) additional height
-S9 Nine inches (228 mm) additional height

Anchor Bolts
Quantity
Required

Catalog
Number

S-81365-2

Note: Maximum available column height is 120 (3658 mm).

Each anchor bolt is of galvanized steel and is furnished with two hex

nuts and two flat washers to facilitate leveling the mounting pedestals.

Nominal size of anchor bolts is 138 (32 mm1118 mm).

S&C Specification Bulletin 761-31 17

S&C Alduti-Rupter Switches

Standard Minor Modifications
Item

Applicable to Switch Style

Suffix to be
Added to
Erection
Drawing Number

All

-S1

2 (67 mm) Diameter Tubular Fiberglass Insulating Section in vertical operating shaft

All except Double-Break

rated 69 kV

Cypoxy Insulator Unit in vertical operating shaft

-S2

Insulated Interphase Sections and One Fiberglass Insulating Section in vertical

operating shaft

All except Integer, Vertical-Break rated

25/34.5 kV and 34.5 kV, and DoubleBreak rated 69 kV

-S3

Insulated Interphase Sections and One Cypoxy Insulator Unit in vertical operating shaft

All except Integer, Vertical-Break rated

25/34.5 kV and 34.5 kV, and
Double-Break rated 69 kV

-S4

2 (51 mm) NPS Pipe. Required for rotating-type operating-mechanism vertical shaft when
such shaft exceeds three 10-4 (3150 mm) sections (four 10-4 (3150 mm) sections in the
case of Three-Pole Side-Break Heavy-Duty Style)

All except Integer, Side-Break

Standard-Duty, and Integer
Double-Break rated 46 kV and 69 kV

-S5

2 (51 mm) NPS Pipe with one extra pipe section

All rotating ED Mechanisms

2 (51 mm) NPS Pipe with two extra pipe sections

All rotating ED Mechanisms

-S5B

Refer to ED drawing

-S5C

2 (51 mm) NPS Pipe with three extra pipe sections

-S5A

Key Interlocksingle lock for locked-open application

All

-S6

Provision for Key Interlockallows future addition of single lock for locked-open application

All

-S6L

Auxiliary Contact Switch with 4 N/O and 4 N/C contacts (600 Vac, 20 A)

All

-S7

Provision for power operation of pole-mounted switch by Type AS-1A Switch Operator, or Type
AS-10 Switch Operator, or LS-2 Switch Operator (for 69-kV switches only)

All

-S8

Provision for power operation of steel-structure or pedestal-mounted switch by Type AS-1A

Switch Operator, or Type AS-10 Switch Operator, or LS-2 Switch Operator (for 69-kV
switches only)

All

-S9

Provision for power operation of pole-mounted switch by 6801M Automatic Switch Operator
Torsional or Reciprocating

All rated 14.4 kV and 69 kV

-S16

One Extra Pipe Section1 NPS pipe

Two Extra Pipe Sections1 NPS pipe

Certain Standard Minor Modifications are available for certain

mounting arrangements only. For integer style switches and side-break

standard-duty style switches, the available Standard Minor Modifications
are indicated in the applicable tables on pages 6 through 9, pages 11
through 13, and page 16. For all other switch styles, contact your nearest
S&C Sales Office for availability.

Operating mechanisms for Integer Double-Break Style switches rated

46 kV or Double-Break Style switches rated 69 kV are equipped with 2

(51 mm) NPS pipe as standard.

18 S&C Specification Bulletin 761-31

All reciprocating ED mechanisms

-V1

All reciprocating ED mechanisms

-V2

Double-BreakInteger rated 46 kV. Refer to your nearest S&C Sales

Office for ratings changes.

Not available for power-operated switches.

Not all mounting arrangements are suitable for power operation,
contact your nearest S&C Sales Office for availability.

S&C Alduti-Rupter Switches

AccessoriesFor Alduti-Rupter Switches
For Alduti-Rupter Switch
Rating, kV

Suffix to be
Added to Switch
Catalog Number

Mounting Provisions for three surge arresters per switch Side-Break Integer and Vertical-Break Integer

14.4 thru 34.5

-A1

Mounting Provisions for six surge arresters per switch

Side-Break Integer and Vertical-Break Integer

14.4 thru 34.5

-A2

Ice Shields

Side-Break Integer, Side-Break Standard-Duty, and

Side-Break Heavy-Duty, Three-Pole Double-Break,
and Double-Break Integer

14.4 thru 46

-B

Dead-Ending Provisions

Side-Break Integer with insulated bases (except

vertical mounting configurations)

14.4 thru 34.5

-C

Extension-Link Assembly (one set of six)

Side-Break Integer, Vertical-Break Integer, and DoubleBreak Integer (except vertical and pedestal mounting
configurations)

14.4 thru 46

-D

Item

Style

Applicable to upright mounting configurations only.

Automation ComponentsFor Alduti-Rupter SwitchesThree-Pole Double-Break Integer Style

Item

Suffix to be
Added to Switch
Catalog Number

Shielded Control Cable in Liquidtight Flexible Metal Wiring Conduit

15-foot (4.6 m) length

-G15

25-foot (7.6 m) length

-G25

35-foot (10.7 m) length

-G35

45-foot (13.7 m) length

-G45

60-foot (18.3 m) length

-G60

Single-phase voltage sensing on one side

-V1

Three-phase voltage sensing on one side

-V3

Single-phase current sensing

-J1

Three-phase current sensing

-J3

Three-phase voltage sensing on one side and three-phase current sensing

-V3J3

Single-phase voltage sensing on one side and single-phase current sensing

-V1J1

Single-phase voltage sensing on one side and three-phase current sensing

-V1J3

A shielded control cable in liquidtight flexible metal wiring conduit

(suffix -G15, -G25, -G35, -G45, or -G60) must be specified when

ordering sensing options. Control cables are only available if sensing is
specified.

Other lengths are availablecontact your nearest S&C Sales Office.

When suffix -S5A or -S5B are ordered for Double-Break Integer,

longer cables are requiredcontact your nearest S&C Sales Office.

Order control cable connector assembly Catalog Number SDA-10253

for installation on user-supplied control unit or switch operator. Control

cable connector assembly includes base, male insert, cover, and security
belt to mate with control-cable connector.

S&C Specification Bulletin 761-31 19

S&C Alduti-Rupter Switches

Connectors
Catalog Number
Illustration

For 600-Ampere
Switches or

Description

Accommodating Conductor

For 1200-Ampere
Switches

Bronze Body, Tin Plated.

Includes one 132
Galvanized Steel Bolt

No. 2 (33.6 mm2) solid through 500 kc mil

(335 mm2) stranded copper or aluminum

4740R1

Aluminum-Alloy Body, Tin Plated.

Includes two 132
Galvanized Steel Bolts

No. 2 (33.6 mm2) solid through 500 kc mil

(335 mm2) stranded copper or aluminum

4741R2

No. 6 solid (13.3 mm2) through 250 kc mil

(168 mm2) copper or aluminum

4564R1-B

1/0 solid (53.5 mm2) through 500 kc mil

(335 mm2) copper or aluminum

4565R1-B

2/0 stranded (89 mm2) through 800 kc mil

(539 mm2) copper or aluminum

4567R1-B

4568R1-B

4569R1-B

Standard Bronze Pad Terminal,

Four-Bolt, Tin Plated. Includes
two 131 Galvanized Steel
Bolts for attachment to terminal
pads of switches

4/0 stranded (141 mm2) through 1000 kc mil

(673 mm2) copper or aluminum

For 1200-Ampere
Switches

No. 4 stranded (27.3 mm2) through

1/0 stranded (70.5 mm2) copper or aluminum

5326-B

through 250 kc mil

1/0 stranded (70.5
(168 mm2) copper or aluminum

5327-B

250 kc mil (168 mm2) through 400 kc mil

(269 mm2) copper or aluminum

5328-B

5329-B

through 600 kc mil

350 kc mil (235
(404 mm2) copper or aluminum

5330-B

5331-B

600 kc mil (404 mm2) through 900 kc mil

(606 mm2) copper or aluminum

5333-B

900 kc mil (606 mm2) through 1250 kc mil

(842 mm2) copper or aluminum

5334-B

mm2)

For 600-Ampere
Switches or

For 600-Ampere
Switches

Standard Aluminum-Alloy Pad

Terminal, Four-Bolt. Includes
two 131 Galvanized Steel
Bolts for attachment to terminal
pads of switches

For 1200-Ampere
Switches

mm2)

Provision only for Compression

Connectors. Includes two
132 Galvanized Steel Bolts

4581

Copper Two-to-Four Bolt Adapter.

Includes two 131
Galvanized Steel Bolts for
attachment to terminal pads of
switches

MDA-1162-1

Side-Break Integer Style Switches rated 14.4 kV, 1200 amperes and

25kV, 1200 amperes include two-hole terminal pads as standard. If fourbolt connectors are required, specify the two-to-four bolt adapter Catalog
Number MDA-1162-1 and the four-bolt connector Catalog Number
4569R1-B.

20 S&C Specification Bulletin 761-31

MDA-1162-1

Mechanical interference with blade prevents use on single-pole heavyduty style switches.

When used with aluminum compression connectors, switch terminal

pads should be tin plated. See Specification Deviations on page 2.

S&C Alduti-Rupter Switches

PartsFor Alduti-Rupter Switches
Item

Spare or Replacement Interrupter

Spare or Replacement Interrupter with

integral mounting bracket and muffler

Crossarm Brace Kit

Provisions for crossarm braces
(kit for one switch)

For Use on Alduti-Rupter Switches

kV

Vertical-Break and
Single-Pole Heavy-Duty

7.2
7.2
14.4 or 25
14.4 or 25
14.4

600
1200
600
1200
2400

SA-30817R2
SA-35479
SA-30818R4
SA-35480R2
SA-42789R1

Single-Pole Standard-Duty

14.4

600

SA-30817R2

Vertical-Break, Three-Pole
Vertical-Break Integer, and Three-Pole
Side-Break (Heavy-Duty and Integer)

25/34.5
34.5

600
600

SA-42790R1
SA-42790R1

Vertical-Break and
Vertical-Break Integer

25/34.5
34.5

1200
1200

SA-42789R1
SA-42789R1

Three-Pole Side-Break (Heavy-Duty,

Standard-Duty, and Integer)

7.2
14.4
25

600
600
600

4561
4562R3
5092R1

Side-Break Integer

14.4
25

1200
1200

4562R3
5092R1

Three-Pole Double-Break and

Three-Pole Double-Break Integer

34.5 or 46
69

Side-Break Integer, Upright Configuration

Side-Break Integer, Vertical Configuration
Side-Break Integer

Previous designs of Three-Pole, Side-Break, Heavy-Duty Style

switches (all those rated 400 amperes and all those bearing Catalog
Number Supplements -R1 or -R2 or no supplements, except those
rated 23 kV) require Catalog Number SA-30817R2 or SA-30818R4
(single-bolt) interrupters.

Previous designs of 1200-ampere Three-Pole, Vertical-Break Style

and 1200-ampere Single-Pole switches (all those bearing Catalog

Amperes

Catalog
Number

Style

600
600

All

All

All

All

SDA-10175
SDA-10804
SDA-10367
SDA-10367-1
5053

Number Supplements -R8 or lower) require Catalog Number 4551R2

(7.2 kV) or 4552R4 (14.4 kV) interrupters. Contact your nearest S&C
Sales Office.
Previous designs of Three-Pole Double-Break Style switches (all
those bearing Catalog Number Supplement -R9) require interrupter
Catalog Number 4559R1. Contact your nearest S&C Sales Office.

S&C Specification Bulletin 761-31 21

S&C Alduti-Rupter Switches

Three-Pole Side-Break Integer Style, with steel bases
Three-Pole Side-Break Integer Style, with insulated bases
Vertical Mounting Configuration
14.4 kV, 25 kV, 25/34.5 kV, and 34.5 kV
Dimensions in inches
15 (14.4 kV and 25 kV)
22 (25/34.5 kV and 34.5 kV)

STEEL BASE

A
B

F
E
5

514
214
K
1116
2 DIA.

2 9/16
1
14

1
2
1

1116

1200-AMPERE TERMINAL PAD

HOLE PATTERN

POLE SADDLE
DETAIL

15 (14.4 kV and 25 kV)

22 (25/34.5 kV and 34.5 kV)

INSULATED BASE

F
2
5
3
K

11/16

2 9/16

2 9/16

4 9/16
1

2 DIA.
14

1
2

11/16

POLE SADDLE
DETAIL

22 S&C Specification Bulletin 761-31

1200-AMPERE
TERMINAL PAD
HOLE PATTERN
14.4 kV and 25 kV

1
2

600-AMPERE
TERMINAL PAD
HOLE PATTERN
25/34.5 kV and 34.5 kV

1200-AMPERE TERMINAL PAD

HOLE PATTERN
34.5 kV

S&C Alduti-Rupter Switches

Rating
Mounting
Configuration

Vertical
Clockwise
Opening
Steel
Base

Vertical
Clockwise
Opening
Insulated
Base

Mounting
Arrangements

ED-140R21

ED-672R4

ED-640R5

ED-642R4

kV

Amperes, RMS

BIL

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

17.0

110

1200

40 000

137612R6-E

137612R6

21

27

150

1200

40 000

137613R9-E

137613R9

25

25/34.5 38

150

600

40 000

137167R1-E

137167R1

34.5

38

200

600

40 000

137164R1-E

137164R1

34.5

38

200

1200

40 000

147164-E

14.4

17.0

110

1200

40 000

25

27

150

1200

40 000

34.5

38

200

600

34.5

38

200

1200

Nom.

Max

14.4
25

Net Wt., 3-Pole

Assem., Lbs.

Dimensions in Inches (to nearest 18)

Catalog Number

Porcelain
Station Post
Insulators

Cypoxy Porcelain
Station
Station
Post
Post
InsulaInsulators
tors

Applications
(see pages
4 and 5)

18

106

34

20

23

45

288

330

AEGHK(L)

22

120

40

23

26

53

309

390

AE(GHKL)

26

129

48

28

31

29

53

419

500

AEGHKL

30

129

48

28

31

33

53

456

570

AEGHKL

147164

37 30

129

48

28

33

53

466

550

AE(G)HKL

137192R2-E

137192R2

22

20

91

34

20

23

36

308

350

AEGHK(L)

137193R9-E

137193R9

26

24

103

40

23

26

41

344

425

AE(GHKL)

40 000

137194R1-E

137194R1

31

129

48

28

31

34

53

486

600

AEGHKL

40 000

147194-E

147194

37 31

129

48

28

33

53

496

610

AE(G)HKL

Dimension shown specifies the distance from the switch base to the
outermost projection of the switch.

S&C Specification Bulletin 761-31 23

S&C Alduti-Rupter Switches

Three-Pole Side-Break Integer Style, with steel bases
Three-Pole Side-Break Integer Style, with insulated bases
Upright Mounting Configuration
14.4 kV and 25 kV
Dimensions in inches
23 (14.4 kV)
26 (25 kV)

514

20 (14.4 kV)
23 (25 kV)

STEEL BASE

4
214
4
1116

2
1

2 DIA.

14
9/16 DIA.
HOLES(2)

1200-AMPERE TERMINAL PAD

HOLE PATTERN

1116

POLE SADDLE DETAIL

20 (14.4 kV)
23 (25 kV)

INSULATED BASE

23 (14.4 kV)
26 (25 kV)

4
8

C
1116

2
2
1

2 DIA.
1

14

916 DIA.
HOLE (2)
1116

POLE SADDLE DETAIL

24 S&C Specification Bulletin 761-31

1200-AMPERE TERMINAL PAD

HOLE PATTERN

S&C Alduti-Rupter Switches

Rating

Mounting
Configuration

Mounting
Arrangements

kV

Amperes, RMS

Catalog Number

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

Dimensions in Inches (to nearest 18)

Porcelain
Station Post
Insulators

Net Wt., 3-Pole

Assem., Lbs.
Cypoxy Porcelain
Station
Station
Post
Post
InsulaInsulators
tors

Applications
(see pages
4 and 5)

Upright
Clockwise Opening
Steel Base

ED-136R20

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

137412R8-E
137413R9-E

137412R8
137413R9

21
25

187/8
23

106
120

34
40

15
15

45
53

308
329

350
410

AEGHK(L)
AE(GHKL)

Upright
Clockwise Opening
(Extra Mounting-Pole
Clearance)
Steel Base

ED-136R20

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

138412R2-E
138413R2-E

138412R2
138413R2

21
25

187/8
23

128
128

34
40

24
24

58
52

333
339

375
420

AEGHK(L)
AE(GHKL)

Upright
Counterclockwise
Opening
Steel Base

ED-135R20

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

137512R8-E
137513R9-E

137512R8
137513R9

21
25

187/8
23

106
120

34
40

15
15

45
53

308
329

350
410

AEGHK(L)
AE(GHKL)

Upright
Clockwise Opening
Insulated Base

ED-636R4

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

137392R2-E
137393R9-E

137392R2
137393R9

22
26

20
24

91
103

34
40

15
15

36
41

323
359

365
440

AEGHK(L)
AE(GHKL)

Upright
Clockwise Opening
(Extra Mounting-Pole
Clearance)
Insulated Base

ED-636R4

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

138392R2-E

138392R2

22

20

117

34

24

52

338

380

138393R2-E

138393R2

26

24

129

40

24

54

374

455

AEGHK(L)
AE(GHKL)

Upright
Counterclockwise
Opening
Insulated Base

ED-635R4

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

137492R2-E
137493R9-E

137492R2
137493R9

22
26

20
24

91
103

34
40

15
15

36
41

323
359

365
440

AEGHK(L)
AE(GHKL)

Dimension shown specifies the distance from the switch base to the
outermost projection of the switch.

S&C Specification Bulletin 761-31 25

S&C Alduti-Rupter Switches

Three-Pole Side-Break Integer Style, with steel bases
Three-Pole Side-Break Integer Style, with insulated bases
Upright Mounting Configuration
25/34.5 kV and 34.5 kV
Dimensions in inches
STEEL BASE

28

31

4
3

48

22

53

129
1116

4 9/16

2 9/16

2 DIA.

600-AMPERE
TERMINAL PAD
HOLE PATTERN

1116

14

1200-AMPERE TERMINAL PAD

HOLE PATTERN

POLE SADDLE DETAIL

INSULATED BASE
28

31

414
29

53

818

48

129
1116

3
4 9/16

2 9/16

2 DIA.

1
14

1116

POLE SADDLE DETAIL

26 S&C Specification Bulletin 761-31

600-AMPERE
TERMINAL PAD
HOLE PATTERN

1200-AMPERE TERMINAL PAD

HOLE PATTERN

S&C Alduti-Rupter Switches

Rating

Mounting
Configuration

Upright
Clockwise Opening
Steel Base

Mounting
Arrangements

ED-667R3

Upright
Counterclockwise
Opening
Steel Base

ED-669R3

Upright
Clockwise Opening
Insulated Base

ED-637R3

Upright
Counterclockwise
Opening
Insulated Base

ED-639R3

kV

FaultClosing,
Duty-Cycle,
One-Time;
Amperes,
Mom.
RMS,
(Asym.)
Asym.

Amperes, RMS

Dimensions
in Inches
(to nearest 18)

Catalog Number

Net Wt., 3-Pole

Assem., Lbs.
Applications
(see pages
4 and 5)

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station
Post
Insulators

15 000

137367R3-E

137367R3

26

29

404

485

AEGHKL

15 000

137364R3-E

137364R3

30

33

441

555

AEGHKL

40 000

15 000

147364-E

147364

30

33

451

565

AE(G)HKL

600

40 000

15 000

137467R3-E

137467R3

26

29

404

485

AEGHKL

200

600

40 000

15 000

137464R3-E

137464R3

30

33

441

555

AEGHKL

38

200

1200

40 000

15 000

147464-E

147464

30

33

451

565

AE(G)HKL

34.5

38

200

600

40 000

15 000

137394R1-E

137394R1

31

34

461

575

AEGHKL

34.5

38

200

1200

40 000

15 000

147394-E

147394

30

33

471

585

AE(G)HKL

34.5

38

200

600

40 000

15 000

137494R1-E

137494R1

31

34

461

575

AEGHKL

34.5

38

200

1200

40 000

15 000

147494-E

147494

30

33

471

585

AE(G)HKL

Nom.

Max

BIL

Cont.

25/34.5
34.5

38

150

600

40 000

38

200

600

40 000

34.5

38

200

1200

25/34.5

38

150

34.5

38

34.5

Porcelain
Station
Post
Insulators

Dimension shown specifies the distance from the switch base to the
outermost projection of the switch.

S&C Specification Bulletin 761-31 27

S&C Alduti-Rupter Switches

Three-Pole Side-Break Integer Style, with steel bases
Three-Pole Side-Break Integer Style, with insulated bases
Tiered-Outboard Mounting Configuration
14.4 kV, 25 kV, 25/34.5 kV, and 34.5 kV
Dimensions in inches

STEEL BASE

INSULATED BASE
1

12

1138

2 9/16
1
C

1
2

25/34.5 kV and 34.5 kV

600-AMPERE
AND
14.4/25 kV
1200-AMPERE
TERMINAL PAD
HOLE PATTERN

4 9/16

13

14

90
E
1

90

1200-AMPERE TERMINAL PAD

HOLE PATTERN

B A

B A

2
1
2

28 S&C Specification Bulletin 761-31

4932
2

S&C Alduti-Rupter Switches

Rating
Mounting
Configuration

Mounting
Arrangements

Tiered
Outboard
Clockwise
Opening
Steel Base

Tiered
Outboard
Clockwise
Opening
Insulated
Base

kV

Amperes, RMS

Catalog Number

Dimensions in Inches (to nearest 18)

Applications
(see pages
4 and 5)

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

ED-144R19

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

137812R7-E
137813R9-E

137812R7
137813R9

21
25

18
22

107
119

40
46

20
23

23
26

328
344

370
425

AEGHK(L)
AE(GHKL)

25/34.5
34.5
34.5

38
38
38

150
200
200

600

ED-676R3

1200

40 000
40 000
40 000

137767R3-E
137764R3-E
147764-E

137767R3
137764R3
147764

29
33
33

26
30
30

123
123
117

48
48
48

28
28
28

31
31
31

404
431
476

485
545
580

AEGHKL
AEGHKL
AE(G)HKL

14.4
25

17.0
27

110
150

1200
1200

40 000
40 000

137792R2-E
137793R9-E

137792R2
137793R9

22
26

20
24

107
119

40
46

20
23

23
26

338
364

380
445

AEGHK(L)
AE(GHKL)

ED-644R2

Cypoxy Porcelain
Station Station
Post
Post
InsulaInsulators
tors

Cypoxy
Station Post
Insulators

600

Porcelain
Station Post
Insulators

Net Wt., 3-Pole

Assem., Lbs.

Dimension shown specifies the distance from the switch base to the
outermost projection of the switch.

S&C Specification Bulletin 761-31 29

S&C Alduti-Rupter Switches

Three-Pole Side-Break Heavy-Duty Style
14.4 kV and 25 kV

Dimensions in inches

2
1

8
1

2 9/16

9/16 DIA. HOLES

ON 1 CTRS.

14.4 kV
25 kV
G

2 9/16
5

1
2
2

1 DIA.

M
9/1619/16 SLOTS
ON 2 CTRS.

600-AMPERE TERMINAL PAD

HOLE PATTERN

BASE DETAIL

Rating
Mounting
Configuration

Vertical,
Upright, or
Triangular
Upright

kV

Amperes, RMS

Opening
Direction

Clockwise

Counterclockwise

BIL

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

17.0

110

600

40 000

137012R3-E

137012R3

19

10

34

27

150

600

40 000

137013R7-E

137013R7

23

14

39

14.4

17.0

110

600

40 000

137212R3-E

137212R3

19

10

34

25

27

150

600

40 000

137213R7-E

137213R7

23

14

39

Nom.

Max

14.4
25

30 S&C Specification Bulletin 761-31

Net Wt., 3-Pole

Assem., Lbs.

Dimensions in Inches (to nearest 18)

Catalog Number

Porcelain
Station Post
Insulators

Cypoxy Porcelain
Station Station
Post
Post
InsulaInsulators
tors

Applications
(see pages
4 and 5)

18

13

30

20 21

84

98

AEGHK(L)

21

18

35

23 25

101

128

AEG(HKL)

18

13

30

20 21

84

98

AEGHK(L)

21

18

35

23 25

101

128

AEG(HKL)

S&C Alduti-Rupter Switches

Three-Pole Side-Break Heavy-Duty Style
34.5 kV

Dimensions in inches

212

18

2 9/16

9/16 DIA. HOLES (26)

ON 1 CTRS.

8
1

1
718

1
2

24

600-AMPERE TERMINAL PAD

HOLE PATTERN

24

36

42

4 9/16

28
1

1
5
1

3
1200-AMPERE TERMINAL PAD
HOLE PATTERN

28

1
1 DIA. HOLES (2)

9/1619/16 SLOTS (10)

43/16

BASE DETAIL

Rating
Mounting
Configuration

kV

Opening
Direction

Clockwise
Upright
Counterclockwise

Amperes, RMS

Catalog Number

Net Wt., per Pole, Lbs.

Applications
(see pages
4 and 5)

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

34.5

38

200

600

40 000

138114R1-E

138114R1

120

158

AEGHKL

34.5

38

200

1200

40 000

158114-E

158114

123

161

AE(G)HKL

34.5

38

200

600

40 000

138314R1-E

138314R1

120

158

AEGHKL

34.5

38

200

1200

40 000

158314-E

158314

123

161

AE(G)HKL

S&C Specification Bulletin 761-31 31

S&C Alduti-Rupter Switches

Three-Pole Side-Break Standard-Duty Style
14.4 kV

Dimensions in inches

1978

878

1778

212

9/16 DIA. HOLES (2)

10

14.4 kV
13

18
34 30
9/16 DIA. HOLES
ON 1 CTRS.
5
2 9/16

1
1778

1 DIA. HOLES (2)

9/1619/16 SLOTS
ON 2 CTRS.

BASE DETAIL

600-AMPERE TERMINAL PAD

HOLE PATTERN

Rating
Mounting
Configuration

Upright

20

kV

Opening
Direction

Amperes, RMS

Catalog Number

Net Wt., per Pole, Lbs.

Applications
(see pages
4 and 5)

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Clockwise

14.4

17.0

110

600

40 000

137032R1-E

137032R1

71

85

AEGHK(L)

Counterclockwise

14.4

17.0

110

600

40 000

137232R1-E

137232R1

71

85

AEGHK(L)

32 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Integer Style
Pedestal Mounting Configuration
25/34.5 kV and 34.5 kV

Dimensions in inches

37

C
2

191/16
5

R
N

77

78
2 9/16
41/16

8
DIA. HOLES (2)

DIA. HOLES (2)

BASE DETAIL

1200-AMPERE TERMINAL
PAD HOLE PATTERN

600-AMPERE TERMINAL
PAD HOLE PATTERN

FaultCatalog Number
Closing,
DutyMountMounting
Cycle,
ing
ArrangePorcelain
One-Time;
ConfiguCypoxy
ments
Station
Mom. Amperes,
ration
Station Post
Nom. Max BIL Cont.
Post
(Asym.)
RMS,
Insulators
Insulators
Asym.

Pedestal ED-151R1

Rating

kV

4 9/16

Dimensions in Inches
(to nearest 18)

Amperes, RMS

Net Wt., 3-Pole

Assem., Lbs.

Applications
Cypoxy Porcelain
Station Station (see pages
4 and 5)
Post
Post
R
Insula- Insulators
tors

25/34.5 38 150 600 40 000

20 000 135614R2-E 135614R2 25 14 25 57 285/8 39

362

476

AEGHKL

25/34.5 38 150 1200 40 000

30 000 135814R2-E 135814R2 25 14 25 57 285/8 39

486

600

AE(G)HKL

34.5

38 200 600 40 000

20 000 135714R2-E 135714R2 29 18 36 61 325/8 43

451

565

AEGHKL

34.5

38 200 1200 40 000

30 000 135914R2-E 135914R2 29 18 36 61 325/8 43

451

565

AE(G)HKL

Not including mounting pedestal.

S&C Specification Bulletin 761-31 33

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Integer Style
Pole-Top Mounting Configuration
25/34.5 kV and 34.5 kV
Dimensions in inches

C
2

37

191/16
5
28

R
N

2
2

77

38

41/16
8
10

11/16 DIA.
HOLES(2)

78

1
4 9/16

2 9/16
41/16

DIA. HOLES (2)

4
DIA. HOLES (2)

BASE DETAIL

Pole-Top ED-152R3

1200-AMPERE TERMINAL
PAD HOLE PATTERN

600-AMPERE TERMINAL
PAD HOLE PATTERN

Catalog Number
FaultClosing,
DutyCycle,
Porcelain
One-Time;
Cypoxy
Station
Mom. Amperes,
Station Post
Nom. Max BIL Cont.
Post
(Asym.)
RMS,
Insulators
Insulators
Asym.
kV

Rating

Mounting Mounting
Configu- Arrangements
ration

Dimensions in Inches
(to nearest 18)

Amperes, RMS

Net Wt., 3-Pole

Assem., Lbs.
Applications
Cypoxy Porcelain
Station Station (see pages
4 and 5)
Post
Post
R
Insula- Insulators
tors

25/34.5 38 150 600 40 000

20 000 135624R2-E 135624R2 25 14 25 57 285/8 39

380

494

AEGHKL

25/34.5 38 150 1200 40 000

30 000 135824R2-E 135824R2 25 14 25 57 285/8 39

380

494

AE(G)HKL

34.5

38 200 600 40 000

20 000 135724R2-E 135724R2 29 18 36 61 325/8 43

446

560

AEGHKL

34.5

38 200 1200 40 000

30 000 135924R2-E 135924R2 29 18 36 61 325/8 43

446

560

AE(G)HKL

34 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Integer Style
Upright Mounting Configuration
25/34.5 kV and 34.5 kV
Dimensions in inches

54

25

29

37

19116
512

28
M

R
N

212
2

36

41/16

34

10

114
11/16
2 DIA.

11 9

11/16

Catalog Number

Amperes, RMS

FaultClosing,
Duty-Cycle,
Mounting Mounting
One-Time;
Configura- ArrangePorcelain
Cypoxy
Amperes,
ments
tion
Station
Mom.
Station
Post
Nom. Max BIL Cont.
RMS,
Post
(Asym.)
Insulators
Asym.
Insulators

Upright ED-153R5

600-AMPERE TERMINAL
PAD HOLE PATTERN

Rating

10

kV

1
3

10

BASE DETAIL

4 9/16

2 9/16

1
5

11/16 DIA.
HOLES(2)

818

113

1200-AMPERE TERMINAL
PAD HOLE PATTERN

Dimensions in Inches
(to nearest 18)

Net Wt., 3-Pole

Assem., Lbs.
Applications
Cypoxy Porcelain (see pages
Station Station
4 and 5)
Post
Post
Insula- Insulators
tors

25/34.5 38 150 600 40 000

20 000

135634R2-E 135634R2 25 14 57 285/8 385/8

442

556

AEGHKL

25/34.5 38 150 1200 40 000

30 000

135834R2-E 135834R2 25 14 57 285/8 385/8

442

556

AE(G)HKL

34.5

38 200 600 40 000

20 000

135734R2-E 135734R2 29 18 61 325/8 425/8

496

610

AEGHKL

34.5

38 200 1200 40 000

30 000

135934R2-E 135934R2 29 18 61 325/8 425/8

496

610

AE(G)HKL

S&C Specification Bulletin 761-31 35

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Integer Style
Vertical Mounting Configuration
25/34.5 kV and 34.5 kV
Dimensions in inches
R
A

212

37
28
19116
512

77

34

A
N

7812
1

1116

2 DIA.

612
3

11 912

2 9/16

1116

1
1

4 9/16
1

1
258

2
58

2
2

10

10

BASE DETAIL

58

1200-AMPERE TERMINAL
PAD HOLE PATTERN

600-AMPERE TERMINAL PAD

HOLE PATTERN

Catalog Number
FaultClosing,
DutyMountMounting
Cycle,
ing
ConfiguPorcelain
One-Time;
ArrangeCypoxy
ration
Station
ments Nom. Max BIL Cont. Mom. Amperes, Station Post
Post
(Asym.)
RMS,
Insulators
Insulators
Asym.
kV

Rating

Vertical

Dimensions in Inches
(to nearest 18)

Amperes, RMS

Net Wt., 3-Pole

Assem., Lbs.

Porce Applications
Cypoxy
(see pages
lain
Station
4 and 5)
Station
Post
Post
InsulaInsulators
tors

25/34.5 38 150 600 40 000

20 000 135644R2-E 135644R2 25 14 25 57 285/8 385/8

395

509

AEGHKL

ED- 25/34.5 38 150 1200 40 000

154R5 34.5 38 200 600 40 000

30 000 135844R2-E 135844R2 25 14 25 57 285/8 385/8

395

509

AE(G)HKL

20 000 135744R2-E 135744R2 29 18 36 61 325/8 425/8

461

575

AEGHKL

30 000 135944R2-E 135944R2 29 18 36 61 325/8 425/8

461

575

AE(G)HKL

34.5

38 200 1200 40 000

36 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Integer Style
Tiered-Outboard Mounting Configuration
25/34.5 kV and 34.5 kV
Dimensions in inches
158

5
12

1116

37

234
19116
512

2 DIA.
4538

28

42
M
70

94
N
42

4538

138

38
8
1

1116 DIA.
HOLES (2)

16

258

R
4 9/16

2 9/16

BASE DETAIL

58

58

134

Rating

Catalog Number
FaultClosing,
DutyCycle,
Porcelain
One-Time;
Cypoxy
Station
Mom. Amperes,
Station Post
Nom. Max BIL Cont.
Post
(Asym.)
RMS,
Insulators
Insulators
Asym.
kV

Mounting Mounting
Configur- Arrangements
ation

Outboard

Amperes, RMS

25/34.5 38 150 600 40 000

58
3

600-AMPERE TERMINAL PAD

HOLE PATTERN

Tiered

1200-AMPERE TERMINAL PAD

HOLE PATTERN

Dimensions in Inches
(to nearest 18)

Net Wt., 3-Pole

Assem., Lbs.

Cypoxy Porcelain
Station Station
Post
Post
Insula- Insulators
tors

Applications
(see pages
4 and 5)

20 000

135654R2-E 135654R2 25 14 57 285/8 39

410

524

AEGHKL

ED-155R6 34.5

38 200 600 40 000

20 000

135754R2-E 135754R2 29 18 61 325/8 43

476

590

AEGHKL

34.5

38 200 1200 40 000

30 000

135954R2-E 135954R2 29 18 61 325/8 43

476

590

AE(G)HKL

S&C Specification Bulletin 761-31 37

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Integer Style
Triangular Mounting Configuration
25/34.5 kV and 34.5 kV
Dimensions in inches

37
19116

512
28

2 DIA.

M
18
1

R
N

1116

BASE DETAIL

38

158
9

558

40
R

40
N

SEE
BASE
DETAIL

158

212

58

4 9/16
4116
134

58

58

2 9/16

212
2412

2412
54
5512

34

1
2

58

134

212
818
10

1116 DIA.
HOLES (2)

600-AMPERE TERMINAL 1200-AMPERE TERMINAL

PAD HOLE PATTERN
PAD HOLE PATTERN

Rating
kV

Mounting Mounting
Configura- Arrangements
tion

Dimensions in Inches
(to nearest 18)

FaultClosing,
Duty-Cycle,
One-Time;
Porcelain
Cypoxy
Mom. Amperes,
Station Post Station Post A
Nom. Max BIL Cont.
RMS,
(Asym.)
Insulators Insulators
Asym.

25/34.5 38 150 600 40 000

Triangular ED-156R5

Catalog Number

Amperes, RMS

Net Wt., 3-Pole

Assem., Lbs.

Cypoxy Porcelain
Station Station
Post
Post
Insula- Insulators
tors

Applications
(see pages
4 and 5)

20 000

135664R2-E 135664R2 25 14 57 285/8 385/8

442

556

AEGHKL

34.5

38 200 600 40 000

20 000

135764R2-E 135764R2 29 18 61 325/8 425/8

496

610

AEGHKL

34.5

38 200 1200 40 000

30 000

135964R2-E 135964R2 29 18 61 325/8 425/8

496

610

AE(G)HKL

38 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Style
14.4 kV and 25 kV

878
7

112

878
7

112

Dimensions in inches
22

2
58

4412

58

512

2
2

K
2

134
4 9/16

2 9/16

2
49

A1
B

134 512

5112

4712

58

134

2512

212

2
114 DIA.
114 DIA.

600 AMPERE
14.4 kV

600 AMPERE
25 kV
9

112

112

878
7

H
25

2 9/16

22

4 9/16
134 714

134

738

4712

2
54716

4412

58

51716

58
58

134

A2

600-AMPERE
HOLE PATTERN

234

212

1200-AMPERE
HOLE PATTERN

212

1 DIA.

114 DIA.

1200-AMPERE
14.4 kV

1200-AMPERE
25 kV

BASE DETAIL
NOTE: ALL HOLES ARE 9/16 ON 1 CTRS.

Rating
kV

Amperes, RMS

Mounting
Configuration

Vertical or
Upright

Net Wt., per

Pole., Lbs.

Dimensions in Inches (to nearest 18)

Catalog Number

Porcelain
Station Post
Insulators

A1

A2

Cypoxy Porcelain
Station
Station
Post
Post
InsulaInsulators
tors

Applications
(see pages
4 and 5)

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

14.4

17.0

110

600

40 000

135012R4-E

135012R4

155/8

16

10

18

13

38 265/8

120

141

AEGHK(L)

14.4

17.0

110

1200

61 000

320222R9-E

320222R9

15

16

10

19

11

39 25

163

184

AEGHK(L)

25

27

150

600

40 000

135013R5-E

135013R5

19

20

14

22

13

47 31

161

201

AEG(HKL)

25

27

150

1200

61 000

320223R9-E

320223R9

19

20

14

215/8

15

55/8

46 295/8

194

234

AE(GHKL)

S&C Specification Bulletin 761-31 39

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Style
14.4 kV, 2400-A cont.
Dimensions in inches

381516

2116

29
181516
512
SEE TERMINAL PAD
DETAIL

62

43
32
29

61116

18

29

8
15
2 9/16

4 9/16

58

58

9/16 DIA.
HOLES (8)

1716

1116

1116

58

600-AMPERE TERMINAL
PAD HOLE PATTERN

5
12

2400-AMPERE TERMINAL PAD

HOLE PATTERN

10

BASE DETAIL

TERMINAL PAD DETAIL

Rating
kV

Amperes, RMS

Mounting
Configuration

Catalog Number

Porcelain
Station Post
Insulators

Net Wt., per

Pole., Lbs.
Cypoxy
Porcelain
Station
Station Post
Post
InsulaInsulators
tors

Applications
(see pages
4 and 5)

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

Vertical

14.4

17.0

200

2400

40 000

135072R2-E

135072R2

146

184

AEGHKL

Upright

14.4

17.0

200

2400

40 000

135092R2-E

135092R2

146

184

AEGHKLL

40 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Three-Pole Vertical-Break Style
25/34.5 kV and 34.5 kV
Dimensions in inches

37

28
19116
512
SEE TERMINAL PAD
DETAIL

R
N

8
11
2 9/16

4 9/16

58

58

9/16 DIA.
HOLES (8)

1716

1116

1116

58

600-AMPERE TERMINAL
PAD HOLE PATTERN

5
12

1200-AMPERE TERMINAL PAD

HOLE PATTERN

10

BASE DETAIL

TERMINAL PAD DETAIL

Rating
kV

Amperes, RMS

Mounting
Configuration

Vertical

Upright

Dimensions in Inches
(to nearest 18)

Catalog Number

Porcelain
Station Post
Insulators

Cont.

Mom.
(Asym.)

Cypoxy
Station Post
Insulators

150

1200

40 000

135894R3-E

135894R3

25

14

200

600

40 000

135794R3-E

135794R3

29

18

200

1200

40 000

135994R3-E

135994R3

29

38

150

1200

40 000

135874R3-E

135874R3

34.5

38

200

600

40 000

135774R3-E

34.5

38

200

1200

40 000

135974R3-E

Nom.

Max

25/34.5

38

34.5

38

34.5

38

25/34.5

BIL

Net Wt., per

Pole., Lbs.
Cypoxy Porcelain
Station Station
Post
Post
Insula- Insulators
tors

Applications
(see pages
4 and 5)

57

28

39

123

150

AE(G)HKL

61

32

43

132

170

AEGHKL

18

61

32

43

132

170

AE(G)HKL

25

14

57

28

39

123

150

AE(G)HKL

135774R3

29

18

61

32

43

132

170

AEGHKL

135974R3

29

18

61

32

43

132

170

AE(G)HKL

S&C Specification Bulletin 761-31 41

S&C Alduti-Rupter Switches

Three-Pole Double-Break Style
34.5 kV and 46 kV

Dimensions in inches

Dimensions in inches (mm)

10

916
HOLES
(22)
ON 1
CTRS.

10

F
J

916 1916
SLOTS (6)

2
916 HOLES (2)

BASE DETAIL

600-AMPERE TERMINAL PAD

HOLE PATTERN

Rating
Mounting
Configuration

kV

Net Wt., per

Pole., Lbs.
Cypoxy Porcelain
Station Station
Post
Post
Insula- Insulators
tors

Applications
(see pages
4 and 5)

Mom.
(Asym.)

Porcelain
Station Post
Insulators

40 000

320304R10-E

320304R10

21

18

50 20 19 19 47 28

170

227

AEGH(KL)

40 000

320305R10-E

320305R10

25

22

56 23 22 22 53 32

236

293

AEG(KL)

200 600

40 000

320404R10-E

320404R10

21

18

50 20 19 19 47 28

170

227

AEGH(KL)

48.3 250 600

40 000

320405R10-E

320405R10

25

22

56 23 22 22 53 32

236

293

AEG(KL)

Nom. Max BIL Cont.

34.5 38
46

Dimensions in Inches (to nearest 18)

Cypoxy
Station Post
Insulators

Vertical,
Upright, 34.5 38 200 600
Triangular
Upright, 46 48.3 250 600
or Tiered

Inverted

Catalog Number

Amperes, RMS

42 S&C Specification Bulletin 761-31

S&C Alduti-Rupter Switches

Three-Pole Double-Break Style
Ground Switch
34.5 kV and 46 kV
Dimensions in inches
R
A
B
41/2

9/1619/16 SLOTS (4)

514
2

F
E
C

F
9/16 DIA.
HOLES (8)
ON 1 CTRS.

514

112

BASE DETAIL

9/16
HOLES (2)

600-AMPERE TERMINAL PAD

HOLE PATTERN

Rating
Mounting
Configuration

Vertical,
Upright

kV

Amperes, RMS

Catalog Number

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Dimensions in Inches (to nearest 18)

Net Wt., per

Pole., Lbs.
Cypoxy Porcelain
Station Station
Post
Post
Insula- Insulators
tors

Applications
(see pages
4 and 5)

Nom. Max BIL Cont.

Mom.
(Asym.)

34.5 38

200 600

40 000 320304R10-G-E 320304R10-G 21

18

50 20 19 9 46 32

170

227

AEGH(KL)

48.3 250 600

40 000 320305R10-G-E 320305R10-G 25

22

56 23 22 11

236

293

AEG(KL)

46

52 36

S&C Specification Bulletin 761-31 43

S&C Alduti-Rupter Switches

Three-Pole Double-Break Style
69 kV

Dimensions in inches
45916
40516
30

117/8

61/2

101/4

15/8

1 TYP.
211/8
9/16 TYP.
30
R 311/4

701/4
3

30
9/1619/16 TYP.
271/8
2 TYP.
51/8

513/16

15/8

9/16 TYP.

BASE DETAIL
1

5/8

1200-AMPERE TERMINAL PAD

HOLE PATTERN

Rating
kV

Mounting
Configuration

Vertical,
Upright, or Tiered
Upright

Amperes, RMS

Catalog Number

Net Wt., per Pole., Lbs.

Porcelain
Station Post
Insulators

650

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

Porcelain
Station Post
Insulators

69

72.5

350

1200

40 000

320306

44 S&C Specification Bulletin 761-31

Applications
(see pages
4 and 5)

AEG

S&C Alduti-Rupter Switches

Three-Pole Double-Break Integer Style
Upright Mounting Configuration
46 kV

Dimensions in inches

178
148
24

60

23

48

54

6
22

38316
30316
7

6
144

POLE SADDLE
DETAIL

15
18

20

1
1

10

10

916 DIA.
HOLES (2)

BASE DETAIL

600-AMPERE TERMINAL PAD

HOLE PATTERN

Rating
Mounting
Configuration

Mounting
Arrangement

Upright

ED-160R1

kV
Nom.

46

Max

Amperes, RMS
BIL Cont.

48.3 250

600

Mom.
(Asym.)

40 000

FaultClosing,
Duty-Cycle,
One-Time;
Amperes,
RMS,
Asym.

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

18 000

320335-E

320335

930

1080

Net Wt., 3-Pole

Assem., Lbs.

Catalog Number

Applications
(see pages
4 and 5)

AEG(KL)

S&C Specification Bulletin 761-31 45

S&C Alduti-Rupter Switches

Three-Pole Double-Break Integer Style
Vertical Mounting Configuration
46 kV

Dimensions in inches
142
108
6

48

48

R 23
2

2316
54

22

7
78

POLE SADDLE
DETAIL

30316
38316
2

20

1
2

78
10

916 DIA. HOLES (2)

10

BASE DETAIL

600-AMPERE TERMINAL PAD

HOLE PATTERN

Rating
Mounting
Configuration

Mounting
Arrange
ment

Vertical

ED-161

kV
Nom.

46

Max

Amperes, RMS
BIL Cont.

48.3 250

600

46 S&C Specification Bulletin 761-31

58

Mom.
(Asym.)

40 000

FaultClosing,
Duty-Cycle,
One-Time;
Amperes,
RMS,
Asym.

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

18 000

320345-E

320345

820

980

Catalog Number

Net Wt., 3-Pole

Assem., Lbs.

Applications
(see pages
4 and 5)

AEG(KL)

S&C Alduti-Rupter Switches

Three-Pole Double-Break Integer Style
Tiered-Outboard Mounting Configuration
46 kV

Dimensions in inches

1316
2

23
54

20

POLE BAND
MOUNTING
BRACKETS
(4)

120
90

38316
30316

22

66
148

144

178

66
2
12
916 DIA.
HOLES (2)

600-AMPERE TERMINAL PAD

HOLE PATTERN

BASE DETAIL

Rating
Mounting
Configuration

Tiered

Outboard

Mounting
Arrangement

ED-162

kV
Nom.

46

Max

Amperes, RMS
BIL Cont.

48.3 250

600

Mom.
(Asym.)

40 000

FaultClosing,
Duty-Cycle,
One-Time;
Amperes,
RMS,
Asym.

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

18 000

320355-E

320355

890

1050

Net Wt., 3-Pole

Assem., Lbs.

Catalog Number

Applications
(see pages
4 and 5)

AEG(KL)

S&C Specification Bulletin 761-31 47

S&C Alduti-Rupter Switches

Three-Pole Double-Break Integer Style
Pole-Top Mounting Configuration
46 kV

Dimensions in inches
142
112
48

48

54

23
38316
22
30316
2
7
6

12
2

108
1
DIA. HOLES (4)
10

5
7

916 DIA. HOLES (2)

14

600-AMPERE TERMINAL PAD

HOLE PATTERN

BASE DETAIL

Rating
Mounting
Configuration

Mounting
Arrangement

Pole-Top

ED-163R1

kV
Nom.

46

Max

Amperes, RMS
BIL Cont.

48.3 250

600

48 S&C Specification Bulletin 761-31

Mom.
(Asym.)

40 000

5/8

FaultClosing,
Duty-Cycle,
One-Time;
Amperes,
RMS,
Asym.

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

18 000

320365-E

320365

820

980

Catalog Number

Net Wt., 3-Pole

Assem., Lbs.

Applications
(see pages
4 and 5)

AEG(KL)

S&C Alduti-Rupter Switches

Three-Pole Double-Break Integer Style
Pedestal Mounting Configuration
46 kV

Dimensions in inches

142
112
48

48

54

23
383 16
303 16

22
2

7
12

108

DIA. HOLES (4)

10

2
916 DIA. HOLES (2)

14

600-AMPERE TERMINAL PAD HOLE PATTERN

BASE DETAIL

Rating
Mounting
Configuration

Mounting
Arrangement

Pedestal

ED-164R1

kV
Nom.

46

Max

Amperes, RMS
BIL Cont.

48.3 250

600

Mom.
(Asym.)

40 000

FaultClosing,
Duty-Cycle,
One-Time;
Amperes,
RMS,
Asym.

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

Cypoxy
Station Post
Insulators

Porcelain
Station Post
Insulators

18 000

320375-E

320375

810

970

Net Wt., 3-Pole

Assem., Lbs.

Catalog Number

Applications
(see pages
4 and 5)

AEG(KL)

Not including mounting pedestal.

S&C Specification Bulletin 761-31 49

S&C Alduti-Rupter Switches

Single-Pole Heavy-Duty Style
14.4 kV and 25 kV

Dimensions in inches

M
1 DIA.
HOLES (2)

R
A
B

87/8

112

9/16 DIA.
HOLES ON
1 CTRS.

1 DIA.
HOLES (2)
1

9
7

9/16 DIA.
HOLES ON
1 CTRS.

D
G
F

3
3

4
9/1619/16 SLOTS
2 9/16

9/1619/16 SLOTS

4 9/16

58

58

2
1

58

600-AMPERE

600-AMPERE TERMINAL
PAD HOLE PATTERN

21/4
1200-AMPERE

BASE DETAIL

1200-AMPERE TERMINAL PAD

HOLE PATTERN

TERMINAL PAD DETAIL

Rating
Mounting
Configuration

Vertical

Inverted

kV

Amperes, RMS

Catalog Number

Cypoxy
Station Post
Insulators

Nom.

Max

BIL

Cont.

Mom.
(Asym.)

14.4

17.0

110

600

40 000

136012-E

14.4

17.0

110

1200

61 000

320022R9-E

25

27

150

600

40 000

25

27

150

1200

14.4

17.0

110

14.4

17.0

110

25

27

25

27

Porcelain
Station Post
Insulators

136012

12

10

320022R9

13

10

28

28

136013R1-E

136013R1

16

14

30

61 000

320023R10-E

320023R10

17

14

600

40 000

136112R5-E

1200

61 000

320122R9-E

136112R5

12

320122R9

13

150

600

40 000

136113R1-E

136113R1

150

1200

61 000

320123R10-E

320123R10

50 S&C Specification Bulletin 761-31

Net Wt., per

Pole, Lbs.

Dimensions in Inches (to nearest 18)

18

15

19

19

20

32

10

28

10

28

16

14

17

14

Cypoxy Porcelain
Station Station
Post
Post
InsulaInsulators
tors

Applications
(see pages
4 and 5)

25

40

23

62

76

AEGHK(L)

25

43

23

93

107

AEGHK(L)

17

27

47

27

74

101

AEG(HKL)

21

23

29

50

28

104

131

AE(GHKL)

18

15

25

40

23

62

76

AEGHK(L)

19

19

25

43

23

93

107

AEGHK(L)

30

20

17

27

47

27

74

101

AEG(HKL)

32

21

23

29

50

28

104

131

AE(GHKL)