BS Databook 2013

DATA BOOK
OFF-THE-ROAD TIRES
GENERAL INFORMATION
RADIAL TIRE
BIAS TIRE
REMARKS & SPECIAL OPERATIONS
O-RING, FLAP, RIM, VALVE, CONVERSION TABLES
2013 Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan

All rights reserved.
No part of this manual may be reproduced in any form by any electronic or mechanical means,
including information storage and retrieval devices or systems, without prior written permission
from Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan.
Notice: Although great care has been taken in producing this manual, we can accept no responsibility for any loss or
damage resulting from undetected errors or misprints which may have occurred.
Due to the constant advance of tire technology, the contents of this data book are subject to change without notice.
CONTENTS
INTRODUCTION
1. Industry Standard ................................................................................................. 1
2. Application Vehicle Matching Chart ................................................................... 1
GENERAL INFORMATION
1. Structural Diagram ............................................................................................... 2
2. Definitions ............................................................................................................. 3
3. Classification ........................................................................................................ 4
4. Tire Markings ........................................................................................................ 6
5. Ton-Kilometer-Per-Hour (TKPH)........................................................................ 11
RADIAL TIRE
1. Tread Designs ..................................................................................................... 13
2. Application .......................................................................................................... 18
3. Technical Data .................................................................................................... 24
INTRODUCTION
1. Industry Standard
Bridgestone Corporation has developed a wide range of tire patterns and specifications, so
that the proper Off-the-Road tire can be matched to any vehicle, service, or operating
conditions.
Bridgestones Off-the-Road tires are designed and produced to meet the commonly accepted
international standards, those set by the TRA (Tire and Rim Association) in the U.S.A., by the
ETRTO (European Tire and Rim Technical Organization) in Europe and/or by the JATMA (Japan
Automobile Tire Manufacturers Association) in Japan*.
Load capacities, inflation pressures, dimensions such as overall tire diameter and width, as
well as the relative rims and tube valves follow these standards.
If a tire is to be used for a purpose other than that for which it is originally intended, please
consult Bridgestone Corporation for advice.
*Where differences exist between the TRA, ETRTO and JATMA standards,
Bridgestone selects the most applicable.
2. Application Vehicle Matching Chart

APPLICATION
BIAS TIRE
1. Tread Designs ..................................................................................................... 54
2. Application .......................................................................................................... 56
3. Technical Data .................................................................................................... 62

1. Remarks............................................................................................................... 80
2. Special Operations ............................................................................................. 82
OTHER SPECIFICATION
1. O-Ring Specifications ........................................................................................ 86
2. Flap Specifications ............................................................................................. 86
VEHICLE
Earthmover Service
Dump Trucks, Motor Scrapers, Articulated Dump Trucks,

Coal Haulers, Logging Trucks, Other Mining Trucks, etc.
Grader Service
Motor Graders
Loader & Dozer Service
Front-End Loaders, Back-hoe Loaders, Skid Steer Loaders,

Dozers, Shuttle Trucks, Load-Haul-Dumps, etc.
Mobile Crane Service

(High-Speed)
All-Terrain Cranes, High-Speed Vehicles, etc.
Industrial Service
Straddle Carriers, Aircraft Towing Tractors, Container Stackers,

Counter-balanced Lift Trucks, Mobile Crushers, Log Stackers, etc.
Logging Service
Log-Skidders
Compactor Service
Compactor, Road Rollers
Sand Service
Sand Service Trucks
3. Rim and Valve ..................................................................................................... 87
OTHER INFORMATION
1. Unit Conversion Tables...................................................................................... 94
2. Specific Weight (Approximately)....................................................................... 97
II
INTRODUCTION 1
GENERAL INFORMATION
1. Structural Diagram
2. Definitions
Off-The-Road Radial Tire (ORR)
2.1 Tire Size
2.4 Overall Width (OW)
The size of each tire is indicated by nominal width and

rim diameter in inches and mm.
Radial structure is indicated by the letter R. For some
tire the aspect ratio is indicated by percentage.
Overall Width is the width of a new tire, including 24hour inflation growth, and including protective side ribs,
bars or decorations.
2.5 Section Width (SW)
Example
Radial Tire ; 40.00R57, 33.25R35, 445/95R25
Bias Tire ; 21.00-35, 45/65-45
Belt
Tread
Casing Ply
Section Width is the width of a new tire, including 24hour inflation growth and including normal sidewalls, but
not including protective side ribs, bars, or decorations.
2.2 Star Rating, Ply Rating and

Load Index
2.6 Static Loaded Radius and

Width (SLR, SLW)
The load capacity of a tire is indicated by the star

rating (in case of radial tire) and the ply rating (in case
of bias tire).
The load index is applied in countries where the
ETRTO standards are used.
Static Loaded Radius is the shortest distance from the

axle center to the contact surface of a tire and Static
Loaded Width is the overall width of a tire, mounted on
the approved rim at the specified inflation pressure and
placed still and vertically on a flat board, and loaded with
the specified load.
2.3 Overall Diameter (OD)

Overall Diameter is twice the section height of a new
tire, plus the nominal rim diameter, including 24-hour
inflation growth.
Chafer
2.7 Original Tread Depth (OTD)

Original Tread Depth is the tread depth of a new tire
measured at the point of tread-indicator where available
or one-fourth the width of the tire crown section from the
crown center, including 24-hour inflation growth.
Overall Width (OW)

Section Width (SW)
Off-The-Road Bias Tire (ORS)
Tread Width
Inner Liner
Bead Wire
Free
Radius
Section
Height
(SH)
Rim Flange Height
Breaker
Rim Width
Overall
Diameter
(OD)
Nominal Rim
Diameter
Dual
Spacing
Carcass
Chafer
Static Loaded
Radius
(SLR)
Static Loaded
Width
(SLW)
GENERAL INFORMATION 3
3.2 TRA Classification and Corresponding Bridgestone Off-The-Road

Tires
3. Classification
3.1 Uses and Characteristics of Off-The-Road Tires
The characteristics that Off-The-Road tires must possess differ according to their function and the type of vehicles
they are mounted on.
Off-The-Road tires are classified by the TRA as follows, and the names of the tread patterns of the corresponding
Bridgestone Off-The-Road tires are described below.
TRA Classification
Type/Service
Function
Main tire characteristics

required
Vehicles
Bridgestone Tread Pattern

Radial
Bias
Tread Type
E= Earthmover (Haulage Service)

E-2
Traction
E-3
Rock
E-4
Rock Deep
E-7
Flotation
VUT VKT VSB

VFT VHS VSW
VLT VMT VTS
VEL VRL VRF
L317 VLTS VSNT VMTS
VMTP VZTS VZTP VELSL
VELS VRLS VREP VRDP
VRPS VRQP
VSJ
Rigid dump trucks
Articulated dump trucks
Earthmover
Transporting
Coal haulers
Heat-resistance,
Cut-resistance,
Wear-resistance
Shock burst-resistance
Rib
Traction
Rock
Rock Deep
Grading, Leveling
Graders
Loader and
dozer
Loading and
dozing
Loaders, Bulldozers
Traction,
Maneuverability,
(directional stability)
Cut-resistance,
Wear-resistance
Stability
L-2
L-3
L-4
L-5
L-5S
C-1
C-2
Smooth
Grooved
High-speed
Travelling
All-Terrain Cranes
Industrial
Handling & Towing Equipments
Heat-resistance,
Wear-resistance,
Traction
Uneven wear,
Wear-resistance,
Stability
Handling & Towing
RR
AL2
LS-2
Intermediate
VSB
Mobile Crane Service (High-Speed)

VGT VHB VHS VSW

VHB VEL VCH VCHD VCHR
VCHS VELS VRLS VSDL VSMS
Industrial Service
RL RLS ELS2 STMS YS2
Design Tread-Depth
Log-skidders
Mobile crane
(High-speed)
GL FG
RL VL2
RLS NL
DL
STMS
Industrial Service
Traction, Flotation,
Cut-resistance
Log-skidding
VUT VKT VSW

VLT VJT VTS
VLTS VSNT VSNL
VSDT VSDL VSDR
VSMS
C=Compactor Service
Tire-rollers
Logging
VMTS
LS=Logging Service
Oil-resistance,
Cut-resistance,
Wear-resistance
Compacting
RG
GL FG
RL
VUT VKT VSW
Traction Regular
Rock Regular
Rock Deep
Rock Extra-Deep
Smooth Extra-Deep
LHDs
Compactor
SCP2
L=Loader & Dozer (Slow Speed Service)
Off road trucks
Grader
RLS ELS2
G=Grader
G-1
G-2
G-3
G-4
Scrapers
WL RL VL2
150%
100%
250%
Regular Tread
Deep Tread
Extra Deep Tread
E-2/E-3
L-2/L-3
G-2/G-3
E-4
L-4
G-4
L-5/L-5S
4. Tire Markings
(ORR)
4.2 Type of Tire Structures Classified by Service and Designated by

Bridgestone
1
6
Each Bridgestone tire has a Bridgestone code number on the tire sidewall according to its specifications.
1 Brand Name
2 Bridgestones Specifications Code
3 Pattern Name
4 Serial Number
OFF
R OA D
ROA D
TYPE 2-A
E S I S TA N T
CUT R
For
Earthmover service
For
Loader and Dozer service
THE
ROA D
For
Industrial service
OFF
THE
For
Grader service
ROA D
AND
CRANE USE
WHEEL
For
Service
Service
BS
No.
BS Code
Code No.
Structure
Structure
Earthmover Service (E)
1A
2A
3A
Standard
Cut-resistant
Heat-resistant
Grader Service (G)
1A
2A
Standard
Cut-resistant
Loader & Dozer Service (D)
2A
2V*
2Z*
Cut-resistant
Special cut-resistant (TypeV)
Special cut-resistant (TypeZ)
Logging Service (S)
2V
**Standard
*Tire Aspect Ratio
27.00 R 49
Star Rating
Rim Diameter (inches)
Radial Structure
Section Width (inches)
SH = 0.95*
SW
33.25 R 35
Radial Structure
SH = 0.80*
SW
Super Wide Base 40 / 65 - 39 30PR

Ply Rating

Radial Structure
Aspect Ratio 95 Series
Section Width (mm)
Speed Symbol
Load Index
SH = 0.65*
SW
SH, SW : See Page 3
170 E 385 / 95 R 24
A: Standard
V: Cut-resistant type V
Structure:
(Steel Breaker)
Z: Cut-resistant type Z
(Side Steel Breaker)
Characteristics:

Aspect Ratio 65 Series
NOTES: *Bias Tire Only

**2V tires are standard for log skidder service since the possibility of the cutting is high in log skidder operations.
Steel Breaker Tire
Star Rating
THE
GRADER
TYPE 2-A
4.1 Type of Tire Size Designation
Wide Base
OFF
Tire Structures Classified by Type of Service and Bridgestones

Designations
Regular
R OA D
& DOZER
E S I S TA N T
CUT R
IAL SERVICE
INDUSTR
DOT code is necessary for USA public road.
THE
TYPE 2-A
5 Tire Size, Star Rating, Tubeless or Tube Type

6 DOT Code
OFF
L OA D E R
E S I S TA N T
CUT R
OFF
THE
E A R T H M OV I N G
Type of Service:
Type V
Type Z
Steel breaker
construction
Side steel breaker

construction
1: Standard
2: Cut-resistant
3: Heat-resistant
E: Earthmover
G: Grader
D: Loader & Dozer
S: Logging
Steel Breaker Bias Tire

Steel Breaker Off-the-Road tires feature breaker material which is
changed from nylon to steel in order to resist cutting and cut bursting.
Bridgestone Steel Breaker Off-the-Road tires are widely used on loaders
at mining and quarry sites, loaders and shuttle trucks in underground
mines, and also on log loaders.
Side Steel Breaker Bias Tire

In this tire the steel breaker extends to the sidewall of the tire to protect
it against damage. The construction is similar to that described above.
4.3 Load Index
4.4 Speed Symbol
The LOAD INDEX is an international numerical code for the maximum load a tire can carry at the speed indicated by
its speed symbol under service conditions specified by Bridgestone.
The SPEED SYMBOL indicates the speed at which the tire can carry a load corresponding to its load index under
service conditions specified by Bridgestone.
LI
kg
LI
kg
LI
kg
LI
kg
LI
kg
LI
0
1
2
3
4
5
6
7
8
9
45
46.2
47.5
48.7
50
51.5
53
54.5
56
58
50
51
52
53
54
55
56
57
58
59
190
195
200
206
212
218
224
230
236
243
100
101
102
103
104
105
106
107
108
109
800
825
850
875
900
925
950
975
1 000
1 030
150
151
152
153
154
155
156
157
158
159
3 350
3 450
3 550
3 650
3 750
3 875
4 000
4 125
4 250
4 375
200
201
202
203
204
205
206
207
208
209
14 000
14 500
15 000
15 500
16 000
16 500
17 000
17 500
18 000
18 500
250
251
252
253
254
255
256
257
258
259
60 000
61 500
63 000
65 000
67 000
69 000
71 000
73 000
75 000
77 500
kg
10
11
12
13
14
15
16
17
18
19
60
61.5
63
65
67
69
71
73
75
77.5
60
61
62
63
64
65
66
67
68
69
250
257
265
272
280
290
300
307
315
325
110
111
112
113
114
115
116
117
118
119
1 060
1 090
1 120
1 150
1 180
1 215
1 250
1 285
1 320
1 360
160
161
162
163
164
165
166
167
168
169
4 500
4 625
4 750
4 875
5 000
5 150
5 300
5 450
5 600
5 800
210
211
212
213
214
215
216
217
218
219
19 000
19 500
20 000
20 600
21 200
21 800
22 400
23 000
23 600
24 300
260
261
262
263
264
265
266
267
268
269
80 000
82 500
85 000
87 500
90 000
92 500
95 000
97 500
100 000
103 000
20
21
22
23
24
25
26
27
28
29
80
82.5
85
87.5
90
92.5
95
97
100
103
70
71
72
73
74
75
76
77
78
79
335
345
355
365
375
387
400
412
425
437
120
121
122
123
124
125
126
127
128
129
1 400
1 450
1 500
1 550
1 600
1 650
1 700
1 750
1 800
1 850
170
171
172
173
174
175
176
177
178
179
6 000
6 150
6 300
6 500
6 700
6 900
7 100
7 300
7 500
7 750
220
221
222
223
224
225
226
227
228
229
25 000
25 750
26 500
27 250
28 000
29 000
30 000
30 750
31 500
32 500
270
271
272
273
274
275
276
277
278
279
106 000
109 000
112 000
115 000
118 000
121 000
125 000
128 000
132 500
136 000
30
31
32
33
34
35
36
37
38
39
106
109
112
115
118
121
125
128
132
136
80
81
82
83
84
85
86
87
88
89
450
462
475
487
500
515
530
545
560
580
130
131
132
133
134
135
136
137
138
139
1 900
1 950
2 000
2 060
2 120
2 180
2 240
2 300
2 360
2 430
180
181
182
183
184
185
186
187
188
189
8 000
8 250
8 500
8 750
9 000
9 250
9 500
9 750
10 000
10 300
230
231
232
233
234
235
236
237
238
239
33 500
34 500
35 500
36 500
37 500
38 750
40 000
41 250
42 500
43 750
40
41
42
43
44
45
46
47
48
49
140
145
150
155
160
165
170
175
180
185
90
91
92
93
94
95
96
97
98
99
600
615
630
650
670
690
710
730
750
775
140
141
142
143
144
145
146
147
148
149
2 500
2 575
2 650
2 725
2 800
2 900
3 000
3 075
3 150
3 250
190
191
192
193
194
195
196
197
198
199
10 600
10 900
11 200
11 500
11 800
12 150
12 500
12 850
13 200
13 600
240
241
242
243
244
245
246
247
248
249
45 000
46 250
47 500
48 750
50 000
51 500
53 000
54 500
56 000
58 000
Speed Symbol
Speed (km/h)
Speed Symbol
Speed (km/h)
A1
A2
A3
A4
A5
A6
A7
A8
5
10
15
20
25
30
35
40
B
C
D
E
F
G
50
60
65
70
80
90
4.5 Conversion Table: Star Rating to Ply Rating

Service
Tire Size
Earthmover
12.00R24
14.00R24
14.00R25
16.00R25
18.00R25
18.00R33
21.00R35
40.00R57
17.5R25
20.5R25
25/65R25
23.5R25
26.5R25
29.5R25
29.5R29
33.25R29
33.25R35
37.25R35
37.5R39
40.5/75R39
Star
Rating
3
3
3
2
1
2
2
2
2
1
1
2
2
1
2
2
2
2
2
2
2
2
2
Corresponding
Ply Rating
up to 24
up to 32
up to 32
up to 36
up to 24
up to 36
up to 40
up to 44
up to 74
up to 16
up to 24
up to 28
up to 32
up to 24
up to 32
up to 32
up to 34
up to 40
up to 44
up to 44
up to 48
up to 52
up to 54
Service
Tire Size
Grader
14.00R24
16.00R24
17.5R25
15.5R25
17.5R25
20.5R25
Loader
23.5R25
26.5R25
29.5R25
29.5R29
35/65R33
45/65R45
Star
Rating
1
1
1
1
1
1
2
1
2
1
2
1
2
1
1
1
Corresponding
Ply Rating
up to 16
up to 16
up to 16
up to 16
up to 16
up to 24
up to 28
up to 24
up to 32
up to 24
up to 36
up to 28
up to 34
up to 34
up to 36
up to 50
Note: Due to the practice of altering inflation pressure to improve flotation on sand, Bridgestone does not apply a star
rating to tire size 21.00R25 VSJ.
4.6 Size Conversion Table
5. Ton-Kilometer-Per-Hour (TKPH)
Metric
Inch
385/95R24, 25
445/95R24, 25
445/80R25
505/95R25
525/80R25
750/65R25
14.00R24, 25
16.00R24, 25
17.5R25
18.00R25
20.5R25
30/65R25
5.1 Operating TKPH

Earth-moving, mining and logging tires have become increasingly important with the development of large
construction vehicles. The primary task of these heavy-duty tires is to haul heavy loads faster, over longer distances.
This heavy hauling inevitably causes heat built-up in the tires. As tires have limited resistance to heat, deterioration of
the tire may occur at an early stage of operation if used beyond the rated TKPH.
Accordingly, it is necessary when selecting tires, to determine the amount of work which will keep the tire within a
safe range to avoid over-heating when the vehicle is operated under given conditions. The amount of work done
under the given conditions and within a safe range is shown as Operating Ton-Kilometer-Per-Hour (Operating
TKPH) which can be determined by the following formula:
Formula for Calculation of Operating TKPH
4.7 Dual Specification Codes
Operating
=
TKPH
Some Bridgestone Off-The-Road Tires have dual specification codes which can be used for both services.
Construction
Size Designation
26.5R25 MS* VLT T DE2
Radial

+
Earthmover Service
1
2
D2A
E2A
26.5 25 20 VL2 T DE2

Bias
Bias
(AWSS)
AWSS
[km/hour]
D2A
G2A
(Empty)
Tire Load
+ (Loaded)
2
Round Trip Distance[km] Number of Cycles per Shift

Total Hours of Operation per Shift
17.5R25 1 VKT T EG2

Radial
E2A
G2A
*Multiple Star Rating

Bridgestone Radial Tires marked with LOADER & DOZER (one star) and EARTHMOVER (two star)
have specified load capacity on each servicing condition.
Strength of tire casing is designed to constrain inflation pressure used.
<26.5R25 as an example>
Star Rating
Loader
(one
Earthmover
(two
star)
stars)
Inflation
Pressure
Load
(Load Index)
Speed
(Speed Symbol)
5.00 bar
15,000 kgs
(202)
11,500 kgs
(190)
10 km/hour
(A2)
50 km/hour
(B)
5.25 bar
5.2 Tire TKPH

Tire TKPH varies depending on the tires design (size, tread pattern
and the type of compound). A High TKPH tire generates less heat
than that of lower TKPH tire. However, the lower TKPH tire will have
greater cut and wear resistance than the higher TKPH one.
Compound Characteristics
better
Earthmover Service
+
Grader Service
Type of Service
Average Work Shift Speed
(MTL)
Tire Load
MTL
[metric tons] =
D2A
E2A
17.5 25 12 FG T DG2

+
Grader Service
Mean Tire-Load
Cut Resistant
Standard
Cut Resistance
Combination
Heat Resistant
The TKPH method is applicable in the following situations.

(1) One way distance: within 16 km (10 miles)
a. When haul length exceeds 16 km one way, consult a
Bridgestone Representative.
b. If the round-trip distance is less than 5km (3miles), Tire TKPH
better
Heat Resistance
figures can be increased by 12%.
(2) Ambient temperature: 38C (100F)
For ambient temperatures other than 38C (100F), the Tire TKPH rating should be revised based on the following formula.
a. Radial Tire
Revised TKPH rating = [1 + A (38CMax. Ambient Temperature C)]* Tire TKPH
Below
Above
Description on Tire Sidewall
27.00 (33.5) inches in Section Width: A =0.010

b. Bias Tire
Revised TKPH rating = [1 + A (38CMax. Ambient Temperature C)]* Tire TKPH
Below
Above
10

*Revising coefficient: The value is shown in the following table.
RADIAL TIRE
Revising Coefficient
Ambient
Temperature
C
F
14
15
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
57
59
61
64
68
72
75
79
82
86
90
93
97
100
104
108
111
115
118
122
Bias Tire
Tire Section
27.00 and below
30.00 and over
1.144
1.138
1.132
1.120
1.108
1.096
1.084
1.072
1.060
1.048
1.036
1.024
1.012
1.000
0.988
0.976
0.964
0.952
0.940
0.928
Radial Tire
Tire Section
27.00 and below
30.00 and over
1.120
1.115
1.110
1.100
1.090
1.080
1.070
1.060
1.050
1.040
1.030
1.020
1.010
1.000
0.990
0.980
0.970
0.960
0.950
0.940
1.240
1.230
1.220
1.200
1.180
1.160
1.140
1.120
1.100
1.080
1.060
1.040
1.020
1.000
0.980
0.960
0.940
0.920
0.900
0.880
1.216
1.207
1.198
1.180
1.162
1.144
1.126
1.108
1.090
1.072
1.054
1.036
1.018
1.000
0.982
0.964
0.946
0.928
0.910
0.892
1. Tread Designs
Earthmover Service
E2
V-STEEL
ULTRA TRACTION
(VUT)
V-STEEL
K-TRACTION
(VKT)
V-STEEL
S-BLOCK
(VSB)
E2
For all ambient temperatures below 14C (57F), the same TKPH value as calculated at 14C (57F) should be used.
(3) Maximum speed: 50 km/h (30 mph)

When maximum speed exceeds 50 km/h, please refer the followings;
a. Radial Tire
No revision is needed up to the speed of 65 km/h (40 mph).
Over 65 km/h: Consult a Bridgestone Representative.
b. Bias Tire
When the maximum speed exceeds 50 km/h (30 mph) under loaded conditions, the following formula is used:
Revised TKPH Rating =
50 km/h
Max. speed
Tire TKPH
Example:
The TKPH Rating for 21.00-35, 36PR RLS E1A is 226; if the tire is to run at 60 km/h when loaded.
V-STEEL
F-TRACTION
(VFT)
V-STEEL
H-SERVICE
(VHS)
V-STEEL
SNOW WEDGE
(VSW)
50
226 =188
60
E3
(4) To obtain the TKPH(TMPH) for type 2A-LS, multiply type 2A rating by 0.8.
(5) The respective types of vehicles are subject to the following speed limitations.
Maximum Speed
Type of Vehicle
Maximum Speed
Dump & Scraper
50 km/h (30 mph)
Grader
40 km/h (25 mph)
Loader & Dozer
10 km/h (5 mph)
5.3 Proper TKPH

The average operating TKPH, calculated after several samples, should not exceed the tire TKPH rating. Exceeding
the tire TKPH may result in serious tire damage or failure.
12
V-STEEL
L-TRACTION
(VLT)
Wide Base
Regular
V-STEEL M-TRACTION
(VMT)
V-STEEL
TRACTION-STABILITY
(VTS)
RADIAL TIRE 13
E3
V-STEEL
E-LUG
(VEL)
E4
Wide Base
Regular
V-STEEL R-LUG
(VRL)
V-STEEL
ROCK FAST
(VRF)
14.00R24~
16.00R25
21.00R33~
37.00R57
V-STEEL R-LUG S (VRLS)
V-STEEL
ROCK E-PREMIUM
(VREP)
V-STEEL
ROCK DEEP
PREMIUM (VRDP)
Sand Service
E4
L317
V-STEEL
L-TRACTION S
(VLTS)
V-STEEL
N-TRACTION
(VSNT)
E4
V-STEEL
M-TRACTION S
(VMTS)
V-STEEL
M-TRACTION
PREMIUM (VMTP)
V-STEEL
ROCK PREMIUM
SERVICE (VRPS)
E7
V-STEEL
ROCK QUARRY
PREMIUM (VRQP)
V-STEEL
JAMAL
(VSJ)
Grader Service
E4
V-STEEL
Z-TRACTION S
(VZTS)
14
V-STEEL
Z-TRACTION
PREMIUM (VZTP)
37.00R57
VELSL
G2
18.00R25~
21.00R35
40.00R57
31/90R49
46/90R57
V-STEEL E-LUG S (VELS)
V-STEEL
U-TRACTION
(VUT)
V-STEEL
K-TRACTION
(VKT)
G4
V-STEEL
SNOW WEDGE
(VSW)
V-STEEL
M-TRACTION S
(VMTS)
RADIAL TIRE 15
L2
V-STEEL
U-TRACTION
(VUT)
L3
V-STEEL
K-TRACTION
(VKT)
V-STEEL
SNOW WEDGE
(VSW)
V-STEEL
L-TRACTION
(VLT)
V-STEEL
J-TRACTION
(VJT)
V-STEEL
G-TRACTION
(VGT)
V-STEEL
H-BLOCK
(VHB)
V-STEEL
HIGHWAY SERVICE
(VHS)
V-STEEL
SNOW WEDGE
(VSW)
Industrial Service
L3
V-STEEL TRACTIONSTABILITY
(VTS)
L4
V-STEEL
L-TRACTION S
(VLTS)
V-STEEL
N-TRACTION
(VSNT)
L5
V-STEEL
SUPER-DEEP
TRACTION (VSDT)
16
V-STEEL
D-LUG
(VSDL)
V-STEEL
N-LUG
(VSNL)
V-STEEL
H-BLOCK
(VHB)
V-STEEL
E-LUG
(VEL)
V-STEEL
CONTAINER
HANDLER
(VCH)
V-STEEL
CONTAINER
HANDLER DEEP
(VCHD)
V-STEEL
CONTAINER
HANDLER RIB
(VCHR)
L5S
V-STEEL
SUPER DEEP
ROCK (VSDR)
V-STEEL SMOOTH
TREAD-MS
(VSMS)
V-STEEL CONTAINER
HANDLER STABILITY
AND SAFETY
(VCHS)
V-STEEL
E-LUG S
(VELS)
V-STEEL
R-LUG S
(VRLS)
V-STEEL
D-LUG
(VSDL)
V-STEEL
SMOOTH
TREAD-MS
(VSMS)
RADIAL TIRE 17
2. Application
Earthmover Service
HEAT RESISTANT
CUT RESISTANT
VLT
VFT
TRACTION
VMTP VLTS
VSW
VKT
VSNT
VMT
L317
VMTS
VSB
VZTS
ROCK
VZTP
VRL
VEL VELSL
VHS
VRF
Size
Type Star Rating
VUT(E2)
335/80 R 20
365/80 R 20
405/70 R 20
Size
VELS/VRLS
VREP
VRDP
Type Star Rating
20.5 R 25
23.5 R 25
T/L
T/L
MS
MS
VLT(E3)
VKT(E2)
14.00 R 24
17.5 R 25
18.00 R 25
29.5 R 25
29.5 R 29
37.5 R 39
T/T
T/L
T/L
T/L
T/L
T/L
3
1
2
2
2
2
20.5 R 25
23.5 R 25
750/65(30/65) R 25
26.5 R 25
29.5 R 25
33.25 R 29
37.25 R 35
40.5/75 R 39
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
VSB(E2)
14.00 R 24
14.00 R 25
T/T
T/L
3
3
VFT(E2)
18.00 R 33
24.00 R 49
27.00 R 49
Type Star Rating
T/L
MS
29.5 R 35
33.25 R 35
37.25 R 35
40.5/75 R 39
27.00 R 49
T/L
T/L
T/L
T/L
T/L
2
2
2
2
2
VRF(E3)
53/80 R 63
59/80 R 63
T/L
T/L
2
2
L317(E4)
11.00 R 20
12.00 R 20
11 R 22.5
12 R 22.5
12.00 R 24
T/L
T/L
T/L
2
2
2
T/L
30.00 R 51
33.00 R 51
40.00 R 57
T/L
T/L
T/L
2
2
2
T/T
T/T
T/L
T/L
T/T
3
3
14
3
3
T/L
T/L
T/L
T/L
T/L
T/L
MS
MS
2
2
2
MS
T/L
T/L
T/L
2
2
2
VEL(E3)
18.00 R 25
18.00 R 33
21.00 R 35
T/T: Tube Type T/L: Tubeless Type
VLTS(E4)
20.5 R 25
23.5 R 25
750/65(30/65) R 25
26.5 R 25
29.5 R 25
875/65 R 29
Size
Type Star Rating
26.5 R 25
29.5 R 25
29.5 R 29
35/65 R 33
T/L
T/L
T/L
T/L
MS
MS
MS
MS
T/T
T/L
T/L
T/L
T/L
T/L
T/L
3
3
2
2
2
2
2
VMTP(E4)
12.00 R 24
18.00 R 33
21.00 R 33
21.00 R 35
24.00 R 35
24.00 R 49
27.00 R 49
33.00 R 51
T/T
T/L
T/L
T/L
T/L
T/L
T/L
T/L
3
2
2
2
2
2
2
2
T/L
T/L
2
2
VZTS(E4)
37.00 R 57
40.00 R 57
Type Star Rating
46/90 R 57
T/L
VELSL(E4)
37.00 R 57
18.00 R 25
18.00 R 33
21.00 R 35
31/90 R 49
40.00 R 57
24.00 R 35
24.00 R 49
27.00 R 49
30.00 R 51
33.00 R 51
36.00 R 51
37.00 R 57
Type Star Rating
27.00 R 49
T/L
T/L
T/L
T/L
T/L
T/L
2
2
2
2
2
T/L
T/L
T/L
T/L
T/L
T/L
2
2
2
2
2
2
T/L
T/L
2
2
VRDP(E4)
T/L
T/L
T/L
T/L
T/L
T/L
2
2
2
2
2
T/T
T/L
T/L
T/L
T/T
T/L
T/L
T/L
T/L
T/L
T/L
T/L
3
3
2
2
2
2
2
2
2
2
2
2
VRLS(E4)
14.00 R 24
14.00 R 25
16.00 R 25
21.00 R 33
Size
VREP(E4)
VELS(E4)
VMTS(E4)
14.00 R 24
14.00 R 25
16.00 R 25
18.00 R 25
18.00 R 33
24.00 R 35
27.00 R 49
Size
VZTP(E4)
VSNT(E4)
VMT(E3)
VHS(E2)
36.00 R 51
MS
MS
MS
MS
MS
2
2
2
VTS(E3)
875/65 R 29
Size
VRQP
VRL(E3)
*VSW(E2)
T/L
T/L
T/L
VRPS
33.00 R 51
42/90 R 57
40.00 R 57
46/90 R 57
53/80 R 63
VRPS(E4)
33.00 R 51
40.00 R 57
46/90 R 57
50/90 R 57
53/80 R 63
59/80 R 63
VRQP(E4)
18.00 R 33
24.00 R 35
MS: Multiple Star Rating
*VSW is especially designed for snow surface operations.
18
T/T: Tube Type T/L: Tubeless Type

RADIAL TIRE 19
Grader Service

CUT RESISTANT
HEAT RESISTANT
VUT
VSW
VKT
VUT
CUT RESISTANT
VLT
TRACTION
TRACTION
HEAT RESISTANT
VSW
VKT
VTS
ROCK
VLTS VSNT
VSDT
VSNL
Size
Type Star Rating
VUT(G2)
13.00 R 24 TG
14.00 R 24 TG
15.5 R 25
17.5 R 25
20.5 R 25
23.5 R 25
Type Star Rating
VUT(L2)
T/L
1
T/L
1
T/L 12
T/L
1
T/L
1
T/L
1
335/80 R
365/80 R
405/70 R
15.5 R
17.5 R
20.5 R
23.5 R
T/L
T/L
T/L
1
1
1
14.00 R
15.5 R
17.5 R
20.5 R
23.5 R
T/L
T/L
T/L
T/L
T/L
T/L
T/L
12
1
1
1
24 TG
25
25
25
25
T/L
T/L
T/L
T/L
T/L
1
1
1
1
1
24 TG
25
25
25
25
T/L
T/L
T/L
T/L
T/L
1
1
MS
MS
1
* VSW(G2)
14.00 R 24 TG
16.00 R 24 TG
17.5 R 25
T/L 13
T/L
1
T/L
1
VMTS(G4)
14.00 R 24 TG
T/L
*VSW(L2)
14.00 R
17.5 R
20.5 R
23.5 R
600/65 R
1
VLT(L3)
T/T: Tube Type

T/L: Tubeless Type
TG: For Semi-Drop Center Rim
20
20.5 R
23.5 R
750/65(30/65) R
26.5 R
29.5 R
Size
25
25
25
25
25
T/L
T/L
T/L
T/L
T/L
T/T: Tube Type

T/L: Tubeless Type
MS
MS
MS
MS
MS
VSDL VSDR
Type Star Rating
Size
VSMS
Type Star Rating
VSDL(L5)
VJT(L3)
20
20
20
25
25
25
25
VKT(L2)
VKT(G2)
14.00 R 24 TG
16.00 R 24 TG
17.5 R 25
Size
ROCK
VJT
VMTS
17.5 R
20.5 R
23.5 R
26.5 R
29.5 R
25
25
25
25
25
T/L
T/L
T/L
T/L
T/L
12
1
12
12
1
550/65 R
650/65 R
750/65 R
775/65 R
875/65 R
25
25
25
29
29
T/L
T/L
T/L
T/L
T/L
1
1
1
1
MS
20.5 R 25
23.5 R 25
875/65 R 29
T/L
T/L
T/L
MS
MS
MS
VTS(L3)
VLTS(L4)
VSNT(L4)
26.5 R
29.5 R
29.5 R
35/65 R
2
2
2
2
25
25
29
33
T/L
T/L
T/L
T/L
14.00 R 20
35/65 R 33
45/65 R 45
T/T
T/L
T/L
2
2
2
T/L
T/L
T/L
T/L
T/L
12
12
12
12
12
MS
MS
MS
MS
VSNL(L4)
VSDT(L5)
23.5 R
26.5 R
29.5 R
29.5 R
35/65 R
25
25
25
29
33
15
15
15
20
25
25
25
25
25
25
29
33
39
45
51
57
57
T/T
T/T
T/L
T/T
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
2
2
2
2
1
12
12
12
12
12
12
12
1
12
2
20.5 R 25
T/L
12
T/T
T/T
T/T
T/T
T/L
T/L
T/L
T/L
2
2
2
2
12
12
12
2
8.25 R
10.00 R
14.5 R
12.00 R
15.5 R
17.5 R
20.5 R
23.5 R
26.5 R
29.5 R
29.5 R
35/65 R
45/65 R
45/65 R
50/65 R
55.5/80 R
60/80 R
VSDR(L5)
NEW
VSMS(L5S)
9.00 R
12.00 R
12.00 R
14.00 R
17.5 R
18.00 R
26.5 R
29.5 R
20
20
24
24
25
25
25
29
RADIAL TIRE 21

ON ROAD
Industrial Service
OFF ROAD
VHB
VRLS
14.00 R 24
16.00 R 25
18.00 R 25
3
2
3
TRACTION
VGT
T/T
T/L
T/L
16.00 R 25
T/L
23.5 R 25
35/65 R 33
T/L
T/L
2
2
18.00 R 25
T/L
16.00 R 25
T/L
VSDL
VEL
18.00 R 25
T/L
VHB
VSW
Size
Type
VGT
170E 445/80 R 25
Size
Type
VHS
T/L
VHB
170E 385/95 R 24
177E 445/95 R 25
186E 505/95 R 25
VHS
T/T
T/L
T/L
170E
170E
170F
177E
174F
186E
176F
Size
Type
VSMS
VCH
12.00 R 20
12.00 R 24
14.00 R 24
* VSW
385/95 R
385/95 R
385/95 R
445/95 R
445/95 R
505/95 R
525/80 R
24
25
25
25
25
25
25
T/T
T/L
T/L
T/L
T/L
T/L
T/L
170E 385/95 R 25
177E 445/95 R 25
T/L
T/L
T/T
T/T
T/T
3
2
3
VCHR
VCHD
16.00 R 25
T/L
Sand Service
VCHS
12.00 R
12.00 R
14.00 R
14.00 R
18.00 R
18.00 R
20
24
24
24 TG
25
33
T/T
T/T
T/T
T/L
T/L
T/L
3
3
3
3
3
VSJ(E7)
16.00 R 20
21.00 R 25
T/L
T/T
T/L
28
28
VELS
T/T: Tube Type
T/L: Tubeless Type
22
18.00 R 33
T/L
T/T: Tube Type

T/L: Tubeless Type
RADIAL TIRE 23
3. Technical Data
LI/SS
Star
Rating
TRA Code
or
Application
Spec
L5
D2A
TKPH TMPH
Approximate Inflated Dimensions

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
Dual Spacing Rim/Flange Height
mm
inch
inch
Pattern
Tire Load Limits at Various Cold Inflation Pressures
VSDL
L5
D2A
905
35.6
287
11.3
416
16.4
330
13.0
48.0
7.50V
VSDL
14.5R15
Tubeless
VSDL
L5
D2A
899
35.4
359
14.1
413
16.3
412
16.2
48.0
11.00/1.5
VSDL
20"
9.00R20
VSMS
L5S
D2A
1054
41.5
260
10.2
474
18.7
303
11.9
51.0
7.00T
20"
VSMS
11.00R20
L317
E4
188
129
1107
43.6
290
11.4
512
20.2
325
12.8
25.0
335
13.2
8.00V
L317
1146
45.1
308
12.1
523
20.6
346
13.6
25.0
384
15.1
8.50V
L317
E4
208
142
VSDL
L5
D2A
1168
46.0
320
12.6
538
21.2
359
14.1
57.0
VSMS
L5S
D2A
1173
46.2
312
12.3
540
21.3
351
13.8
57.0
VCH
Industrial
Service
IDU
IDU
D2A
kPa
psi
400
58
Loader
10
5
kg
lbs
kg
lbs
kg
lbs
2
2200 2275 2350 2425 2500 2575 2650 2725 2800 2875 2950 3025 3100
4860 5020 5200 5360 5540 5700 5860 6000 6200 6350 6500 6650 6800
2
2875 2975 3075 3175 3275 3375 3475 3575 3650 3750 3850 3950 4025
6350 6550 6800 7000 7200 7450 7650 7850 8050 8250 8500 8700 8900
2
2425 2550 2650 2775 2875 2975 3100 3200 3300 3400 3500
5360 5620 5860 6100 6350 6600 6800 7050 7250 7500 7700
Loader
10
5
E/M
E4
50
30
E4
kg
lbs
kg
lbs
kg
lbs
kg
lbs
2
3075 3250 3350 3450 3550 3650 3750 3875 4000 4000 4125 4250 4375
6800 7150 7400 7600 7850 8050 8250 8550 8800 8800 9100 9350 9650
3
2810 2910 3010 3100 3200 3300 3390 3480 3570 3670 3760
6200 6420 6640 6830 7050 7280 7470 7670 7880 8080 8290
3
3110 3220 3330 3430 3540 3650 3750 3850 3950 4060 4160
6860 7100 7340 7560 7800 8050 8270 8490 8720 8940 9170
2
4375 4500 4625 4875 5000 5150 5300 5450 5600 5800 5800 6000 6150
9650 9900 10200 10700 11000 11400 11700 12000 12300 12800 12800 13200 13600
6.50T
L317
VSDL
VSMS
Loader
10
5
VCH
VCHS
IDU
425
62
450
65
475
69
500
73
2500 2600 2710

5510 5730 5970
2770 2880 2990
6110 6350 6590
See characteristics page 48
VCHS
176A5
14.00R20
VSNL
Industrial
Service
L4
16.00R20
Tubeless
VSJ
28
E7
1196
47.1
360
14.2
550
21.7
414
16.3
34.0
10.00WI
VSNL
136B
147A2
E2
L2
DE2
1036
40.8
319
12.6
463
18.2
357
14.1
19.0
141B
153A2
E2
L2
DE2
1087
42.8
347
13.7
483
19.0
389
15.3
21.0
11x20
VUT
VUT
405/70R20
Tubeless
VUT
143B
155A2
E2
L2
DE2
1092
43.0
398
15.7
485
19.1
446
17.6
20.0
13x20
VUT
VUT
For the TKPH(TMPH) Ratings, please refer to page 11.
24
kg
lbs
kPa
psi
11x20
VUT
VUT
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
825
120
2
5200 5400 5550 5750 5900 6100 6250 6450 6600 6800 6950 7100 7300
11400 11900 12300 12600 13000 13400 13800 14200 14600 15000 15300 15700 16100
VUT
365/80R20
Tubeless
Loader
10
5
Sand
VUT
550
80
VSJ
16.00R20
525
76
8.25R15
48.0
14.5R15 10.00R15
285
11.2
11.00R20 9.00R20
405
15.9
12.00R20
248
9.8
E/M
50
30
Loader
10
5
E/M
50
30
Loader
10
5
E/M
50
30
Loader
10
5
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
275
40
300
44
325
47
350
51
14.00R20
880
34.6
16.00R20
375
54
1800 1900 2000 2120 2240

4000 4200 4400 4700 5000
335/80R20
10.00R15
335/80R20
Tubeless
Size
15"
VSDL
VSDL
12.00R20
Application
Max.Speed
km/h
mph
2430 2575 2725 2900 3075

5350 5700 6000 6400 6800
2060 2180 2300 2430 2575
4500 4800 5100 5400 5700
2900 3075 3250 3450 3650
6400 6800 7150 7600 8000
2180 2300 2430 2575 2725
4800 5100 5400 5700 6000
3075 3250 3450 3650 3875
6800 7250 7600 8100 8550
1) Figures under the star rating denote the maximum load and inflation pressures.
2) For Loader & Dozer Service, Tire Load Limits will depend on a type of the operation. Please refer to page 82.
365/80R20
15"
8.25R15
Pattern
405/70R20
Tire Size
RADIAL TIRE 25
24"
12.00R24
L317
Star
Rating
TRA Code
or
Application
Spec
14
E4
TBA
TBA

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
1078
42.4
270
10.6
TBA
TBA
TBA
TBA
25.0
Recommended
Minimum
mm
inch
inch
TBA
TBA
TBA
L317
E4
188
129
1109
43.7
292
11.5
517
20.4
327
12.9
25.0
343
13.5
9.00
L317
E4
177
121
1254
49.4
319
12.6
577
22.7
355
14.0
31.5
391
15.4
8.50V
VMTP
E4
E2A
136
93
1256
49.4
319
12.6
577
22.7
355
14.0
31.5
391
15.4
VSMS
L5S
D2A
1275
50.2
312
12.3
573
22.6
364
14.3
57.0
VCH
Industrial
Service
IDU
Industrial
Service
IDU
G2
G2A
Pattern
22.5"
L317
L317
11R22.5 14PR
kPa
psi
E/M
kg
50
30
lbs
TBA
450 475
65
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
Size
750
109
775
112
800
115
815
118
3
2410 2510 2610 2700 2800 2890 2990 3080 3170 3260 3350 3440 3530 3620 3690 3760
5310 5530 5750 5950 6170 6370 6590 6790 6990 7190 7390 7580 7780 7980 8140 8290
VUT
kPa
psi
450
65
3
3050 3180 3300 3430 3550 3670 3790 3900 4020 4140 4250
6720 7010 7280 7560 7830 8090 8360 8600 8860 9130 9370
L317
VMTP
E/M
50
30
kg
lbs
VSMS
Loader
10
5
IDU
kg
lbs
VCH
VCHS
475
69
500
73
525
76
550
80
575
83
1290
50.8
357
14.1
585
23.0
380
15.0
25.0
600
87
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
825
120
2
4875 5150 5300 5450 5600 5800 6000 6150 6300 6500 6500 6700 6900
11000 11400 11700 12000 12300 12800 13200 13600 13900 14300 14300 14700 15200
8.00TG
VUT
14.00R24
Application
Max.Speed
km/h
mph
24"
VCHS
13.00R24 TG
Tubeless
TKPH TMPH
12R22.5
12R22.5
Tubeless
LI/SS
12.00R24
22.5"
11R22.5
Tubeless
Pattern
VKT
E2
E2A
106
73
1351
53.2
390
15.4
612
24.1
442
17.4
25.0
450
17.7
VSB
E2
E2A
179
123
1365
53.7
387
15.2
628
24.7
433
17.0
21.0
450
17.7
Logging
Grader
40
25
10.00W
VKT
VSB
VMTS
VRLS
VSB
E/M
50
30
kPa
psi
200
29
225
33
kg
lbs
1
1850 2000 2180 2360 2500 2650 2800 3000
4080 4400 4800 5200 5520 5840 6150 6600
kPa
psi
450
65
kg
lbs
3
4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050
8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400
475
69
250
36
500
73
275
40
525
76
300
44
550
80
325
47
575
83
350
51
600
87
375
54
625
91
13.00R24 TG
Tire Size
650
94
675
98
700
102
725
105
750
109
775
112
800
115
Logging
Industrial
Service
VMTS
E4
E2A
E1A
91
119
62
82
1400
55.1
386
15.2
642
25.3
428
16.9
38.0
450
17.7
VRLS
E4
E2A
85
58
1403
55.2
390
15.4
644
25.4
432
17.0
39.0
450
17.7
VSMS
L5S
D2A
1394
54.8
390
15.4
634
25.0
437
17.2
72.0
VCH
Industrial
Service
IDU
Industrial
Service
IDU
VCHS
196A5
26
10.00W
VSMS
VHB
VCH
VCHS
Loader
10
5
IDU
14.00R24
VHB
2
kg
5950 6200 6450 6700 6950 7200 7450 7700 7950 8200 8450 8700 8950 9200 9500
lbs 13120 13700 14220 14800 15300 15900 16400 16980 17500 18080 19600 19180 19690 20680 20900
RADIAL TIRE 27
G2
L2
G2A
D2A
VUT
G2
G2A
1354
53.3
373
14.7
611
24.1
420
16.5
25.5
VSW
G2
1351
53.2
390
15.4
594
23.4
446
17.6
23.5
VMTS
VCHS
DG2
370
14.6
L2
1
G4
G2A
Industrial
Service
IDU
1400
55.1
-
373
14.7
OTD
mm
25.0
426
16.8
TBA
TBA
TBA
TBA
10.00VA
15.5R25
Tubeless

kPa
psi
200
29
225
33
250
36
275
40
300
44
325
47
Grader
40
25
kg
lbs
1
2240 2430 2650 2800 3000 3250 3350 3650
4940 5360 5840 6150 6600 7150 7400 8050
Loader
10
5
kg
lbs
38.0
170E
Mobile Crane
Service
VHS
170E
Mobile Crane
Service
375
54
525
76
550
80
3 VSW=Consult a Bridgestone Representative.
VCHS
VHB
350
51
Size
1
6700 6900
14800 15200
IDU
VHB
VHS
HighSpeed
VKT
G2
G2A
1473
58.0
418
16.5
675
26.6
470
18.5
28.5
VSW
G2
1485
58.5
417
16.4
680
26.8
467
18.4
22.5
VSB
E2
E2A
179
123
1365
53.7
387
15.2
628
24.7
433
17.0
21.0
450
17.7
Logging
10.00VA
VKT
VSW
Grader
40
25
kPa
psi
200
29
225
33
250
36
275
40
300
44
325
47
350
51
375
54
kg
lbs
1
2900 3150 3350 3650 3875 4125 4375 4625
6400 6950 7400 8050 8550 9100 9650 10200
kPa
psi
450
65
kg
lbs
3
4000 4125 4375 4500 4625 4750 5000 5150 5300 5450 5600 5710 5830 5940 6050
8800 9100 9650 9900 10200 10500 11000 11400 11700 12000 12300 12500 12800 13100 13400
25"
E4
VRLS
E4
E2A
E3A
E2A
91
136
85
62
93
58
VHS
170E
170F
Mobile Crane
Service
VSW
170E
Mobile Crane
Service
1406
55.4
391
15.4
650
25.6
435
17.1
38.0
450
17.7
1403
55.2
391
15.4
650
25.6
435
17.1
39.0
450
17.7
10.00/1.5
VSB
VMTS
VRLS
E/M
50
30
VSB
Logging
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
14.00R25
10.00/1.5
VHS
VSW
HighSpeed
385/95R25
VMTS
VUT
2
1
G2, L2
DG2
1269
50.0
383
15.1
559
22.0
436
17.2
27.0
VKT
L2
D2A
1275
50.2
392
15.4
570
22.4
445
17.5
23.5
VSDL
L5
D2A
1329
52.3
392
15.4
606
23.9
443
17.4
64.0
28
VKT
VUT
VSW
VMTS
VKT
VSW
Application
Max.Speed
km/h
mph
8.00TG
385/95R25
Tubeless
Pattern
kPa
psi
12.00/1.3
VUT
VKT
VSDL
VUT
Loader
10
5
Grader
40
25
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
1
2
kg
5000 5150 5450 5600 5800 6150 6300 6500 6700 6900 7100
lbs 11000 11400 12000 12300 12800 13600 13900 14300 14800 15200 15700
kPa
psi
125
18
150
22
175
25
200
29
225
33
250
36
275
40
kg
lbs
1
1550 1750 2000 2180 2360 2575 2800 3000
3420 3860 4400 4800 5200 5680 6150 6600
15.5R25
25"
14.00R25
Tubeless
196A5
TKPH TMPH
385/95R24
153A8
175A2
Star
Rating
16.00R24 TG
VKT
LI/SS
14.00R24 TG
14.00R24 TG
Tubeless
16.00R24 TG
Tubeless
Recommended
Minimum
mm
inch
inch
8.00TG
-
Spec
Pattern
385/95R24

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1351
370
612
422
53.2
14.6
24.1
16.6
TRA Code
or
Application
Tire Size
300
44
For slope and ditching service, inflation pressures should be increased by 100kPa
(15psi) with no increase in load rating.
For extreme conditions, consult a Bridgestone Representative for additional
recommended operating requirements.
RADIAL TIRE 29
VMTS
E4
E2A
123
84
VRLS
E4
E2A
E1A
112
146
77
100
VHB
Industrial
Service
IDU
VCHD
Industrial
Service
IDU
VCHR
Industrial
Service
IDU
Industrial
Service
IDU
VRLS
445/95R25
Tubeless
VHB
177E
Mobile Crane
Service
VHS
177E
174F
Mobile Crane
Service
177E
Mobile Crane
Service
E2
G2
L2
G2, L2
EG2
D2A
DG2
95
-
65
-
VSW
17.5R25
Tubeless
VKT
VUT
1531
60.3
448
17.6
697
27.4
510
20.1
OTD
mm
45.0
45.0
Recommended
Minimum
mm
inch
inch
513
11.25/2.0
20.2
513
20.2
Application
Max.Speed
km/h
mph

kPa
psi
VMTS
VRLS
E/M
50
30
VHB
VCHD
VCHR
VRLS
IDU
450
65
475
69
500
73
525
76
550
80
575
83
625
91
650
94
675
98
700
102
VHB
VHS
VSW
HighSpeed
1339
52.7
440
17.3
600
23.6
490
19.3
27.0
1340
52.8
444
17.5
586
23.1
500
19.7
28.0
14.00/1.5
VKT
153A8
176A2
G2
L2
DG2
1340
52.8
440
17.3
597
23.5
480
18.9
27.0
VJT
176A2
182A2
1
2
L3
D2A
1352
53.2
443
17.4
604
23.8
510
20.1
30.0
VSDL
2
1
L5
D2A
1400
55.1
440
17.3
639
25.2
495
19.5
68.0
VSMS
2
1
L5S
D2A
1374
54.1
440
17.3
623
24.5
487
19.2
68.5
Mobile Crane
Service
445/80R25
Tubeless
VGT
18.00R25
Tubeless
VKT
E2
E1A
239
164
1610
63.4
510
20.1
733
28.9
571
22.5
31.0
587
23.1
VEL
E3
E2A
181
124
1605
63.2
506
19.9
729
28.7
580
22.8
34.0
587
23.1
Industrial
Service
VUT
VKT
VSW
VJT
VSDL
VSMS
E/M
50
30
Loader
10
5
VUT
VKT
VSW
Grader
40
25
VGT
HighSpeed
600
87
Size
2
kg
5150 5450 5600 5800 6000 6300 6500 6700 6900 7100 7300
lbs 11400 12000 12300 12800 13200 13900 14300 14800 15200 15700 16100
VSW
170E
Pattern
30

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1535
450
696
507
60.4
17.7
27.4
20.0
16.00R25
TKPH TMPH
445/95R25
Spec
kPa
psi
275
40
kg
lbs
kg
lbs
1
3350 3550 3750 4000 4125
7400 7850 8250 8800 9100
kPa
psi
125
18
kg
lbs
1
1850 2120 2360 2650 2900 3075 3350 3650
4080 4680 5200 5840 6400 6800 7400 8050
VKT
VEL
E/M
50
30
VEL
IDU
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
1
2
6000 6150 6500 6700 7100 7300 7500 7750 8000 8250 8500
13200 13600 14300 14800 15700 16100 16500 17100 17600 18200 18700
150
22
175
25
200
29
225
33
250
36
275
40
300
44
For slope and ditching service, inflation pressures should be increased by 100kPa
(15psi) with no increase in load rating.
For extreme conditions, consult a Bridgestone Representative for additional
recommended operating requirements.
kPa
psi
13.00/2.5
300
44
450
65
475
69
500
73
525
76
550
80
575
83
600
87
17.5R25
TRA Code
or
Application
LI/SS
625
91
650
94
675
98
445/80R25
16.00R25
Tubeless
Star
Rating
Pattern
700
102
2
kg
6700 7100 7300 7500 7750 8000 8250 8500 8750 9000 9250
lbs 14800 15700 16100 16500 17100 17600 18200 18700 19300 19800 20400
18.00R25
Tire Size

RADIAL TIRE 31
Spec
TKPH TMPH
VMTS
E4
E2A
169
116
VELS
E4
E2A
E1A
144
179
99
123
1638
64.5
515
20.3
744
29.3
580
22.8
50.0
587
23.1
VSMS
2
1
L5S
D2A
1675
65.9
512
20.2
733
28.9
592
23.3
84.5
Industrial
Service
Industrial
Service
IDU
Industrial
Service
IDU
214A5
VHB
186E
Mobile Crane
Service
VHS
186E
Mobile Crane
Service
L2
D2A
20.5R25
Tubeless
VKT
VSW
MS
VUT
E2, L2
51.0
DE2
1470
57.9
530
20.9
644
25.4
597
23.5
30.5
1470
57.9
530
20.9
640
25.2
603
23.7
30.5
G2, L2
DG2
1473
58.0
533
21.0
643
25.3
608
23.9
30.5
149
-
102
-
1495
58.9
533
21.0
676
26.6
586
23.1
40.0
VJT
186A2
L3
D2A
1480
58.3
530
20.9
652
25.7
597
23.5
33.0
VLTS
177B
186A2
MS
E4
L4
DE2
126
-
86
-
1478
58.2
530
20.9
667
26.3
581
22.9
49.0
2
1
L5
D2A
1552
61.1
531
20.9
704
27.7
583
23.0
78.0
2
1
L5
D2A
1552
61.1
531
20.9
704
27.7
583
23.0
78.0
Mobile Crane
Service
308
211
E7
New
21.00R25
Tubeless
VSJ
525
76
550
80
575
83
17.00/2.0
VSW
VLT
VLTS
VUT
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
825
120
2
kg
6700 7100 7300 7500 7750 8000 8250 8500 8750 9000 9250
lbs 14800 15700 16100 16500 17100 17600 18200 18700 19300 19800 20400
kg
lbs
1
2
11200 11800 12150 12500 12850 13200 13600 14000 14500 15000 15000 15500 16000
24700 26000 26800 27600 28300 29100 30000 30900 32000 33100 33100 34200 35300
E/M
50
30
Grader
40
25
kPa
psi
275
40
300
44
kg
lbs
1
2
4375 4750 5000 5300 5600 5800 6150 6500 6700 6900 7300
9650 10500 11000 11700 12300 12800 13600 14300 14800 15200 16100
kPa
psi
125
18
kg
lbs
1
2430 2800 3150 3450 3875 4125 4375 4625
5360 6150 6950 7600 8550 9100 9650 10200
150
22
325
47
175
25
350
51
200
29
375
54
225
33
400
58
250
36
425
62
275
40
450
65
475
69
500
73
525
76
300
44
For slope and ditching service, inflation pressures should be increased by 100kPa (15psi) with no increase in load rating.
For extreme conditions, consult a Bridgestone Representative for additional recommended operating requirements.
kPa
psi
VUT
VKT
VSW
VLT
VJT
VLTS
VSDL
VSDR
Loader
10
5
VHS
HighSpeed
VSJ
600
87
HighSpeed
17.00AL/1.7(1only)
32
Loader
10
5
IDU
500
73
DE2
176F
VSMS
475
69
E3
L3
VHS
E/M
50
30
VHB
VHS
MS
525/80R25
Tubeless
VMTS
VELS
450
65
Size
177B
186A2
VSDR

kPa
psi
VSMS
VHB
VCHS
VLT
VSDL
Application
Max.Speed
km/h
mph
VCHS
505/95R25
Tubeless
mm
Pattern
400
58
425
62
450
65
475
69
500
73
525
76
550
80
505/95R25
VHB
OTD
18.00R25
Recommended
Minimum
mm
inch
inch
587
13.00/2.5
23.1
TRA Code
or
Application
LI/SS
575
83
600
87
625
91
650
94
20.5R25
18.00R25
Tubeless

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1649
514
754
571
64.9
20.2
29.7
22.5
Star
Rating
Pattern
1
2
kg
8000 8250 8750 9000 9500 9750 10000 10300 10900 11200 11500
lbs 17600 18200 19300 19800 20900 21500 22000 22700 24000 24700 25400
Sand
21.00R25 525/80R25
Tire Size
RADIAL TIRE 33
Spec
VKT
L2
D2A
VSW
MS
E2, L2
DE2
1596
62.8
620
24.4
692
27.2
689
27.1
31.5
VUT
G2, L2
DG2
1599
63.0
620
24.4
702
27.6
688
27.1
33.5
TKPH TMPH
OTD
mm
33.0
Pattern
185B
195A2
MS
E3
L3
DE2
190
-
130
-
1623
63.9
616
24.3
734
28.9
680
26.8
42.5
VJT
195A2
201A2
1
2
L3
D2A
1600
63.0
617
24.3
696
27.4
695
27.4
35.0
VLTS
185B
195A2
MS
E4
L4
DE2
161
-
110
-
1616
63.6
612
24.1
729
28.7
675
26.6
54.0
VSDT
201A2
195A2
2
1
L5
D2A
1660
65.4
621
24.4
745
29.3
680
26.8
79.0
2
1
L5
D2A
1672
65.8
608
23.9
755
29.7
677
26.7
87.0
IDU
Industrial
Service
L3
D2A
1350
53.1
547
21.5
594
23.4
605
23.8
32.5
L2
D2A
1424
56.0
600
23.6
TBA
TBA
TBA
TBA
31.5
VSDL
550/65R25
Tubeless
VTS
600/65R25
Tubeless
VSW
650/65R25
Tubeless
VTS
750/65R25
(30/65R25)
Tubeless
VLT
187A2
190B
202A2
VTS
VSW
VLT
VLTS
26.5R25
Tubeless
VUT
VKT
VSW
VLT
VJT
VLTS
VSDT
VSDL
Loader
10
5
VSDL
IDU
(14.00/1.5)
17.00/2.0
VTS
Loader
10
5
(17.00/1.7, 17.00/2.0)
VSW
1502
59.1
642
25.3
660
26.0
710
28.0
37.0
19.50/2.5
VTS
MS
E3
L3
DE2
225
-
154
-
1625
64.0
765
30.1
718
28.3
831
32.7
43.0
(22.00/3.0)
24.00/3.0
VLT
VLTS
L3
D2A
1607
63.3
745
29.3
701
27.6
833
32.8
41.0
1623
63.9
1747
68.8
765
30.1
684
26.9
713
28.1
787
31.0
832
32.8
736
29.0
55.0
E4
E2A
195
134
VLT
193B
202A2
MS
E3
L3
DE2
220
-
151
-
45.0
VLT
VTS
22.00/3.0
VLT
VLT
34
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
kPa
psi
125
18
150
22
175
25
200
29
225
33
250
36
275
40
525
76
300
44
kg
lbs
1
3150 3550 4000 4500 4875 5300 5600 6000
6950 7850 8800 9900 10700 11700 12300 13200
kg
lbs
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
1
2
10300 10600 11200 11500 12150 12500 12850 13200 13600 14000 14500
22700 23400 24700 25400 26800 27600 28300 29100 30000 30900 32000
E/M
50
30
Loader
10
5
kg
7500 7750
lbs
16500 17100
kg
8750 9000
lbs
19300 19800
kg
10000 10600
lbs
22000 23400
kg
6900 7300 7750 8250 8750 9250 9750
lbs 15200 16100 17100 18200 19300 20400 21500
kg
13200 13600
lbs
29100 30000
1
8250 8500
18200 18700
1
9500 9750
20900 21500
1
10900 11500
24000 25400
2
10300 10600
22700 23400
1
14500 15000
32000 33100
E/M
50
30
Loader
10
5
1
kg
7100 7500 8000 8500 9000 9500 9750
lbs 15700 16500 17600 18700 19800 20900 21500
kg
12850 13200
lbs
28300 29100
10300 10600 11200

22700 23400 24700
1
14000 14500 15000
30900 32000 33100
19.50/2.5
D2A
Grader
40
25
300
44
1
2
kg
5600 6000 6500 6700 7100 7500 7750 8250 8500 9000 9250
lbs 12300 13200 14300 14800 15700 16500 17100 18200 18700 19800 20400
kPa
psi
L3
190B
E/M
50
30
275
40
Size
VLTS

kPa
psi
VUT
VLT
Application
Max.Speed
km/h
mph
23.5R25
Recommended
Minimum
mm
inch
inch
19.50/2.5
-
TRA Code
or
Application
LI/SS
750/65R25 (30/65R25) 650/65R25 600/65R25 550/65R25
23.5R25
Tubeless

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1602
612
690
686
63.1
24.1
27.2
27.0
Star
Rating
Pattern
2
11500
25400
2
15500 16000 16500 17000 18000 18500
34200 35300 36400 37500 39700 40800
26.5R25
Tire Size
RADIAL TIRE 35
E2A
186
127
1736
68.3
675
26.6
784
30.9
743
29.3
60.0
MS
E4
L4
DE2
165
-
113
-
1779
70.0
685
27.0
799
31.5
740
29.1
57.5
209A2
202A2
2
2
1
38.0
L5
D2A
D2A
1775
69.9
697
27.4
790
31.1
778
30.6
88.0
VSDL
2
1
L5
D2A
1790
70.5
684
26.9
797
31.4
761
30.0
95.5
VSMS
2
1
L5S
D2A
1775
69.9
684
26.9
810
31.9
746
29.4
95.0
VKT
E2
E2A
E1A
310
376
212
258
1861
73.3
762
30.0
822
32.4
844
33.2
44.0
VLT
200B
208A2
MS
E3
L3
DE2
266
-
182
-
1877
73.9
762
30.0
840
33.1
830
32.7
48.0
VJT
208A2
L3
D2A
1865
73.4
762
30.0
810
31.9
878
34.6
42.0
VLTS
200B
E4
E2A
225
154
1865
73.4
762
30.0
835
32.9
844
33.2
65.0
MS
E4
L4
DE2
220
-
151
-
1905
75.0
768
30.2
849
33.4
835
32.9
60.0
216A2
208A2
2
2
1
L5
D2A
D2A
1903
74.9
779
30.7
845
33.3
869
34.2
96.0
25.00/3.5
VSDL
2
1
L5
D2A
1925
75.8
766
30.2
855
33.7
846
33.3
104.0
VTS
L3
D2A
1740
68.5
775
30.5
762
30.0
843
33.2
43.0
(24.00/3.5)
25.00/3.5
27.00/3.5
(28.00/3.5)
VTS
MS
E3
L3
DE2
237
162
1865
73.4
850
33.5
804
31.7
982
38.7
47.5
MS
E4
L4
DE2
225
-
154
-
1868
74.0
858
33.8
827
32.6
938
36.9
60.0
VKT
E2
E2A
E1A
330
401
226
275
1958
77.1
765
30.1
870
34.3
841
33.1
44.0
VSNT
MS
E4
L4
DE2
232
-
159
-
2000
78.7
774
30.5
905
35.6
849
34.6
60.0
203B
214A2
D2A
36
mm
Pattern

kPa
psi
275
40
300
44
325
47
350
51
VLTS
VSNT
E/M
50
30
VJT
VSNT
VSDT
VSDL
VSMS
Loader
10
5
VKT
VLT
VLTS
VSNT
E/M
50
30
VLT
VJT
VSNT
VSDT
VSDL
Loader
10
5
kg
lbs
Loader
10
5
E/M
50
30
Loader
10
5
E/M
50
30
Loader
10
5
kg
lbs
kg 10000 10900 11500 12150

lbs 22000 24000 25400 26800
kg
lbs
kg
9250 9750 10300 10900
lbs 20400 21500 22700 24000
kg
lbs
29"
VTS
VTS
VLTS
VTS
VLTS
25.00/3.5
Application
Max.Speed
km/h
mph
VKT
VSNT
VSNT
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
Size
575
83
600
87
625
91
650
94
1
2
kg
7100 7500 8000 8500 9000 9500 9750 10300 10600 11200 11500
lbs 15700 16500 17600 18700 19800 20900 21500 22700 23400 24700 25400
kg
lbs
1
2
12850 13200 14000 14500 15000 15500 16000 16500 17000 18000 18500
28300 29100 30900 32000 33100 34200 35300 36400 37500 39700 40800
26.5R25
E4
OTD
1
2
kg
8500 9250 9750 10300 10900 11500 11800 12500 12850 13600 14000
lbs 18700 20400 21500 22700 24000 25400 26000 27600 28300 30000 30900
1
2
15500 16000 17000 17500 18000 19000 19500 20000 20600 21200 22400
34200 35300 37500 38600 39700 41900 43000 44100 45400 46700 49400
29.5R25
TKPH TMPH
1
17000
37500
2
15500
34200
1
18500 19500 20600 21200
40800 43000 45400 46700
15000
33100
12850 13600
28300 30000
15500
34200
14000
30900
16500
36400
14500
32000
1
2
11500 12150 12500 13200 13600 14500 15000
25400 26800 27600 29100 30000 32000 33100
1
2
16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600
36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000
775/65R29
193B
VLTS
29.5R29
Tubeless
VLTS
VSDT
875/65R29
Tubeless
D2A
202A2
209A2
VSNT
29"
775/65R29
Tubeless
L3
VJT
VSDT
29.5R25
Tubeless
1
2
Star
Rating
VSNT
Recommended
Minimum
mm
inch
inch
22.00/3.0
-
Spec
LI/SS
875/65R29
26.5R25
Tubeless

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1737
682
754
766
68.4
26.9
29.7
30.2
TRA Code
or
Application
Pattern
29.5R29
Tire Size
RADIAL TIRE 37
33"
18.00R33
Tubeless
L5
D2A
VSDL
2
1
L5
D2A
2008
79.1
776
30.6
900
35.4
856
33.7
104.5
VSMS
L5S
D2A
2008
79.1
766
30.2
904
35.6
861
33.9
104.5
VLT
E3
E2A
349
239
2076
81.7
864
34.0
906
35.7
943
37.1
54.0
27.00/3.5
VFT
E2
822
32.4
567
22.3
30.5
587
23.1
13.00/2.5
E3
225
180
500
19.7
328
263
1811
71.3
VEL
E3A
E1A
1805
71.1
500
19.7
835
32.9
560
22.0
35.0
587
23.1
VMTS
E4
E2A
E1A
199
246
136
168
1862
73.3
515
20.3
849
33.4
576
22.7
51.0
587
23.1
VMTP
E4
E2A
E1A
185
229
127
157
1870
73.6
515
20.3
846
33.3
575
22.6
55.0
587
23.1
VELS
E4
E2A
E1A
170
211
116
145
1856
73.1
512
20.2
856
33.7
575
22.6
49.0
587
23.1
Industrial
Service
E4
E2ALS
E2A
122
152
84
104
Industrial
Service
IDU
VSDT
218A2
211A2
OTD
mm
96.0
Pattern
Application
Max.Speed
km/h
mph

kPa
psi
VSDT
VSDL
VSMS
Loader
10
5
VLT
E/M
50
30
275
40
300
44
325
47
350
51
375
54
kg
lbs
400
58
425
62
450
65
475
69
500
73
525
76
550
80
Size
575
83
600
87
625
91
650
94
1
2
16500 17000 18000 18500 19500 20000 20600 21200 22400 23000 23600
36400 37500 39700 40800 43000 44100 45400 46700 49400 50700 52000
2
kg 11200 12150 12850 13600 14000 15000 15500 16500 17000 17500 18500
lbs 24700 26800 28300 30000 30900 33100 34200 36400 37500 38600 40800
33"
VRQP
VCHS
21.00R33
Tubeless
TKPH TMPH
29.5R29
2
1
Star
Rating
33.25R29
33.25R29
Tubeless
Recommended
Minimum
mm
inch
inch
25.00/3.5
-
Spec
LI/SS
219A5
1890
74.4
515
20.3
876
34.5
575
22.6
64.5
587
23.1
kPa
psi
VFT
VEL
VMTS
VMTP
VELS
VRQP
E/M
50
30
VCHS
VELS
IDU
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
2
kg
7750 8000 8500 8750 9000 9250 9750 10000 10300 10600 10900
lbs 17100 17600 18700 19300 19800 20400 21500 22000 22700 23400 24000
18.00R33
29.5R29
Tubeless

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1989
779
883
872
78.3
30.7
34.8
34.3
TRA Code
or
Application
Pattern
13.00/2.5
VMTP
E4
E2A
E1A
237
293
162
201
1998
78.7
578
22.8
909
35.8
650
25.6
61.0
701
27.6
VRLS
E4
E2A
227
155
1978
77.9
578
22.8
899
35.4
650
25.6
54.0
701
27.6
VSNT
MS
E4
L4
DE2
250
-
171
-
2075
81.7
904
35.6
936
36.9
976
38.4
62.5
VSNL
2
2
15.00/3.0
VMTP
VRLS
E/M
50
30
2
kg 10000 10300 10900 11200 11500 11800 12500 12850 13200 13600 14000
lbs 22000 22700 24000 24700 25400 26000 27600 28300 29100 30000 30900
21.00R33
Tire Size
21.00R33
VSDT
VSDL
224A2
217A2
38
VSNT
L4
D2A
D2A
2075
81.7
880
34.6
936
36.9
981
38.6
62.5
2
1
L5
D2A
2075
81.7
890
35.0
914
36.0
990
39.0
96.0
2
1
L5
D2A
2075
81.7
880
34.6
917
36.1
951
37.4
95.0
Industrial
Service
IDU
kPa
psi
28.00/3.5
VSNT
VSNL
VSDT
VSDL
VSDL
E/M
50
30
Loader
10
5
275
40
300
44
325
47
350
51
375
54
400
58
425
62
kg 10600 11500 12150 12850 13600 14000 15000

lbs 23400 25400 26800 28300 30000 30900 33100
kg
19500 20600
lbs
43000 45400
450
65
475
69
500
73
15500 16000 17000

34200 35300 37500
1
21200 22400 23000
46700 49400 50700
525
76
550
80
575
83
600
87
625
91
650
94
2
17500
38600
2
23600 25000 25750 26500 27250 28000
52000 55100 56800 58400 60000 61500
35/65R33
35/65R33
Tubeless
IDU
RADIAL TIRE 39
E3
VMTP
E4
VELS
E4
VMTS
E4
VMTP
E4
VRLS
E4
VRQP
E4
VRL
E3
TKPH TMPH
E3A
E2A
E1A
E3A
E2A
E1A
410
237
293
342
227
281
281
162
201
234
155
192
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2ALS
489
314
388
453
314
388
453
207
335
215
266
310
215
266
310
142
E1A
380
260

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
mm
inch
inch
Pattern
701
27.6
2048
80.6
577
22.7
922
36.3
655
25.8
61.0
701
27.6
2044
80.5
577
22.7
935
36.8
650
25.6
59.0
701
27.6
2175
85.6
660
26.0
980
38.6
734
28.9
59.0
795
31.3
2194
86.4
660
26.0
975
38.4
734
28.9
68.0
795
31.3
2175
85.6
660
26.0
980
38.6
734
28.9
59.0
795
31.3
2194
86.4
660
26.0
995
39.2
745
29.3
71.5
795
31.3
2120
83.5
768
30.2
932
36.7
844
33.2
39.5
kPa
psi
15.00/3.0
17.00/3.5
40
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
VEL
VMTP
VELS
E/M
50
30
2
kg 10300 10600 11200 11500 11800 12150 12850 13200 13600 14000 14500
lbs 22700 23400 24700 25400 26000 26800 28300 29100 30000 30900 32000
VMTS
VMTP
VRLS
VRQP
E/M
50
30
2
kg 13200 13600 14000 14500 15500 16000 16500 17000 17500 18000 18500
lbs 29100 30000 30900 32000 34200 35300 36400 37500 38600 39700 40800
kPa
psi
25.00/3.5
E3
E1A
472
323
2228
87.7
846
33.3
990
39.0
970
38.2
49.0
27.00/3.5
VRL
37.25R35
Tubeless
VLT
E3
E2A
E1A
417
569
286
390
2388
94.0
954
37.6
1054
41.5
1063
41.9
59.5
31.00/4.0
VLT
VRL
VRL
E3
E1A
563
386
2370
93.3
954
37.6
1045
41.1
1063
41.9
51.0
VKT
E2
E1A
696
477
2524
99.4
982
38.7
1120
44.1
1080
42.5
51.0
32.00/4.5
VLT
E3
E2A
E1A
500
682
342
467
2609
102.6
1002
39.4
1157
45.6
1127
44.4
58.5
32.00/4.5
VLT
VRL
VRL
E3
E1A
675
462
2588
101.9
1002
39.4
1147
45.2
1125
44.3
48.5
VSDL
L5
D2A
2580
101.6
1074
42.3
1116
43.9
1205
47.4
116.0
32.00/4.5
36.00/4.5
VSDL
450
65
21.00R35
37.5
24.00R35
646
25.4
39"
VKT
275
40
300
44
325
47
350
51
375
54
E/M
50
30
kg 10000 10600 11200 11800 12500

lbs 22000 23400 24700 26000 27600
kg 12150 12850 14000 14500 15500

lbs 26800 28300 30900 32000 34200
kg 14500 15500 16500 17500 18500

lbs 32000 34200 36400 38600 40800
E/M
50
30
E/M
50
30
kg 16000 17000 18000

lbs 35300 37500 39700
kg 18000 19000 20600

lbs 39700 41900 45400
Loader
10
5
kg
lbs
400
58
425
62
450
65
475
69
500
73
525
76
2
13200 13600 14500 15000 15500 16000
29100 30000 32000 33100 34200 35300
2
16000 17000 17500 18500 19000 20000
35300 37500 38600 40800 41900 44100
2
19500 20600 21200 22400 23000 23600
43000 45400 46700 49400 50700 52000
2
19000 20000 21200 21800 23000 23600 25000 25750
41900 44100 46700 48100 50700 52000 55100 56800
2
21800 22400 23600 25000 25750 27250 28000 29000
48100 49400 52000 55100 56800 60000 61500 64000
1
33500 34500 36500 37500 40000
74000 76000 80500 82500 88000
29.5R35
912
35.9
VRL
45/65R39
Tubeless
Size
33.25R35
568
22.4
33.25R35
Tubeless
40.5/75R39
Tubeless
35"
1993
78.5
VRL
39"
37.5R39
Tubeless
Application
Max.Speed
km/h
mph
37.25R35
29.5R35
Tubeless
VEL
Spec
37.5R39
24.00R35
Tubeless
TRA Code
or
Application
LI/SS
40.5/75R39
35"
21.00R35
Tubeless
Star
Rating
Pattern
45/65R39
Tire Size
RADIAL TIRE 41
31/90R49
Tubeless
51"
30.00R51
Tubeless
33.00R51
Tubeless
VSNL
L4
D2A
2730
107.5
1123
44.2
1190
46.8
1275
50.2
75.0
VSDL
2
1
L5
D2A
2730
107.5
1123
44.2
1188
46.8
1274
50.2
111.5
VFT
E2
E1A
562
385
2486
97.9
656
25.8
1147
45.2
738
29.1
38.5
795
31.3
VMTP
E4
E2A
-
361
-
247
-
2547
100.3
656
25.8
1175
46.3
735
28.9
68.0
795
31.3
VRLS
E4
1166
45.9
738
29.1
59.0
795
31.3
E2
2646
104.2
750
29.5
1207
47.5
835
32.9
44.0
892
35.1
VRL
E3
2645
104.1
750
29.5
1205
47.4
835
32.9
42.5
892
35.1
VMTS
E4
2690
105.9
750
29.5
1230
48.4
835
32.9
64.0
892
35.1
VMTP
E4
2700
106.3
750
29.5
1239
48.8
835
32.9
73.0
892
35.1
VRLS
E4
2687
105.8
750
29.5
1228
48.3
835
32.9
66.5
892
35.1
VREP
E4
2690
105.9
750
29.5
1231
48.4
835
32.9
66.5
892
35.1
VELSF
E4
234
288
337
382
551
441
516
333
411
481
301
373
436
284
351
411
313
386
452
292
656
25.8
341
421
492
557
804
644
753
486
600
702
440
544
636
415
513
600
457
564
660
427
2531
99.6
VFT
E2A
E1A
E3A
E2A
E3A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
2694
106.1
771
30.4
1228
48.3
862
33.9
66.5
VMT
E3
1294
50.9
950
37.4
E4
2911
114.6
854
33.6
1311
51.6
VMT
E3
2988
117.6
932
36.7
VMTP
E4
729
340
413
491
697
828
405
479
854
33.6
1065
496
603
717
1018
1209
591
700
2850
112.2
VRLS
E3A
E2A
E1A
E3A
E1A
E3A
E2A
E1A
3063
120.6
VRLS
E4
VRDP
E4
VRPS
E4
E2A
E1A
E3A
E2A
E1A
E3A
E2A
558
679
807
558
679
807
558
382
465
553
382
465
553
382
OTD
mm
Pattern
Application
Max.Speed
km/h
mph
Size
kPa
psi
36.00/4.5
VSNL
VSDL
49"
VFT
VMTP
VRLS
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
1
2
kg 35500 37500 38750 40000 42500 43750 45000 46250 47500 50000 51500
lbs 78500 82500 85500 88000 93500 96500 99000 102000 104500 110000 113500
E/M
50
30
kg
lbs
2
15500 16500 17000 17500 18500 19000 19500 20000 20600 21200 21800
34200 36480 37500 38600 40800 41900 43000 44100 45400 46700 48100
24.00R49
17.00/3.5
Loader
10
5
400
58
45/65R45
45"
42
TKPH TMPH
19.50/4.0
VFT
VRL
VMTS
VMTP
VRLS
VREP
E/M
50
30
kg
lbs
2
19500 20000 20600 21800 22400 23000 23600 25000 25750 26500 27250
43000 44100 45400 48100 49400 50700 52000 55100 56800 58400 60000
956
37.6
19.50/4.0
VELSF
E/M
50
30
kg
lbs
2
20600 21200 22400 23000 23600 25000 25750 26500 27250 27800 29000
45400 46700 49400 50700 52000 55100 56800 58400 60000 61500 64000
45.0
993
39.1
22.00/4.5
51"
VMT
VRLS
E/M
50
30
kg
lbs
2
23600 25000 25750 26500 28000 29000 30000 30750 31500 32500 33500
52000 55100 56800 58400 61500 64000 66000 68000 69500 71500 74000
963
37.9
74.5
993
39.1
1338
52.7
1052
41.4
48.0
1074
42.3
E/M
50
kg
lbs
2
27250 29000 30000 30750 32500 33500 34500 35500 36500 37500 38750
60000 64000 66000 68000 71500 74000 76000 78500 80500 82500 85500
932
36.7
1376
54.2
1052
41.4
89.5
1074
42.3
3036
119.5
932
36.7
1371
54.0
1051
41.4
78.5
1074
42.3
3061
120.5
932
36.7
1376
54.2
1051
41.4
87.0
1074
42.3
3061
120.5
932
36.7
1376
54.2
1051
41.4
87.0
1074
42.3
27.00R49
27.00R49
Tubeless
Spec
24.00/5.0
VMT
VMTP
VRLS
VRDP
VRPS
30
31/90R49
49"
24.00R49
Tubeless
Recommended
Minimum
mm
inch
inch
TRA Code
or
Application
LI/SS
30.00R51
45"
45/65R45
Tubeless

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
Star
Rating
Pattern
33.00R51
Tire Size
RADIAL TIRE 43
E4
VSDL
L5
VZTS
E4
VELSL
E4
VRLS
E4
42/90R57
Tubeless
VRDP
E4
40.00R57
Tubeless
VMT
E3
VZTS
E4
VELS
E4
VRDP
E4
VRPS
E4
VZTP
E4
VRDP
E4
VRPS
E4
50/65R51
Tubeless
57"
37.00R57
Tubeless
46/90R57
Tubeless
55.5/80R57
Tubeless
VSDL
50/90R57
Tubeless
VRPS
60/80R57
Tubeless
VSDL
L5
E4
L5
1017
440
535
635
-
E2A
E1A
E3A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
D2A
694
845
1003
1148
694
845
1003
715
870
1033
1204
1463
1739
773
940
1117
773
940
1117
773
940
1117
773
940
1117
766
927
1103
796
968
1150
796
968
1150
-
475
579
687
786
475
579
687
490
596
708
825
1002
1191
529
644
765
529
644
765
529
644
765
529
644
765
525
635
755
545
663
788
545
663
788
-
E2A
E1A
E3A
D2A
44
884
1092
1278
-
605
748
875
-
mm
44.0
Recommended
Minimum
mm
inch
inch
1184
26.00/5.0
46.6
3204
126.1
1015
40.0
1431
56.3
1153
45.4
86.5
1184
46.6
3070
120.9
1278
50.3
1347
53.0
1361
53.6
128.0
40.00/4.5
3422
134.7
1044
41.1
1541
60.7
1190
46.9
87.5
1217
47.9
27.00/6.0
3388
133.4
1044
41.1
1524
60.0
1190
46.9
77.0
1217
47.9
3410
134.3
1044
41.1
1535
60.4
1190
46.9
87.5
1217
47.9
3456
136.1
1060
41.7
1539
60.6
1210
47.7
97.0
1323
52.1
3512
138.3
1108
43.6
1560
61.4
1264
49.8
64.0
1311
51.6
3585
141.1
1140
44.9
1606
63.2
1289
50.7
91.5
1311
51.6
3562
140.2
1127
44.4
1582
62.3
1291
50.8
91.5
1311
51.6
3575
140.7
1108
43.6
1591
62.6
1264
49.8
97.0
1311
51.6
3575
140.7
1108
43.6
1591
62.6
1264
49.8
97.0
1311
51.6
3585
141.1
1145
45.1
1591
62.6
1299
51.1
97.0
1412
55.6
3575
140.7
1145
45.1
1586
62.4
1299
51.1
97.0
1412
55.6
3575
140.7
1145
45.1
1586
62.4
1299
51.1
97.0
1412
55.6
3740
147.2
1395
54.9
1634
64.3
1616
63.6
125.5
3840
151.2
1283
50.5
1702
67.0
1471
57.9
3952
155.6
1491
58.7
1738
68.4
1755
69.1
Pattern
Application
Max.Speed
km/h
mph

kPa
psi
VHS
VRLS
E/M
50
30
VSDL
Loader
10
5
kg
lbs
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
Size
700
102
36.00R51
1485
642
781
927
-
OTD
2
33500 35500 36500 37500 38750 40000 41250 42500 43750 45000 46250
74000 78500 80500 82500 85500 88000 91000 93500 96500 99000 102000
50/65R51
VRLS
E3A
E2A
E1A
E3A
D2A

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
3108
1015
1390
1163
122.4
40.0
54.7
45.4
2
kg 45000 47500 50000 51500 54500 56000 58000 60000 61500 63000 65000
lbs 99000 104500 110000 113500 120000 123000 127500 131500 135500 139000 143500
57"
VZTS
VELSL
VRLS
E4
E/M
E4
50
E4
30
kg
lbs
2
37500 38750 40000 41250 43750 45000 46250 47500 48750 50000 51500
82500 85500 88000 91000 96500 99000 102000 104500 107500 110000 113500
27.00/6.0
VRDP
E4
29.00/6.0
VMT
VZTS
VELS
VRDP
VRPS
E3
E4
E4
E4
E4
kg
lbs
kg
lbs
2
38750 40000 41250 42500 45000 46250 47500 48750 50000 51500 53000
85500 88000 91000 96500 99000 102000 104500 107500 110000 113500 117000
2
42500 45000 46250 48750 50000 51500 53000 54500 56000 58000 60000
93500 99000 102000 107500 110000 113500 117000 120000 123500 128000 132500
29.00/6.0
(32.00/6.0)
VZTP
VRDP
VRPS
E/M
50
30
kg
lbs
2
45000 47500 48750 51500 53000 54500 56000 58000 60000 61500 63000
99000 104500 107500 113500 117000 120000 123500 128000 132500 135500 139000
44.00/6.0
VSDL
107.0
1562
61.5
32.00/6.0
34.00/6.0
VRPS
118
47.00/6.0
VSDL
Loader
10
5
E/M
50
30
Loader
10
5
kg
lbs
kg
lbs
kg
lbs
37.00R57
E2
TKPH TMPH
42/90R57
Spec
40.00R57
VHS
36.00R51
Tubeless
LI/SS
46/90R57
TRA Code
or
Application
Pattern
82500 85000 90000 92500 95000 97500 100000 103000 106000 * About some exceptions, consult a
182000 187500 198000 203500 209000 214500 220500 227000 233500 bridgestone representative.
2
56000 58000 60000 63000 65000 67000 69000 71000 73000 75000 77500
123500 128000 132500 139000 143500 147500 152000 156500 161000 165500 171000
82000 85750 89500 93250 97000 100500 104000 107750 111000 114750 118000
180500 189250 197500 205500 213500 221500 229500 237250 245000 252500 260000
60/80R57 50/90R57 55.5/80R57
Star
Rating
Tire Size
RADIAL TIRE 45
59/80R63
Tubeless
TRA Code
or
Application
VRF
E3
VRDP
E4
VRPS
E4
VRF
E3
LI/SS
Spec
TKPH TMPH
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
E2A
E1A
E3A
1126
1330
1628
974
1150
1408
974
1150
1408
1420
1784
2050
1342
1686
1937
1228
1515
1773
1160
1431
1675
OTD
mm
Recommended
Minimum
mm
inch
inch
Pattern
Application
Max.Speed
km/h
mph
Size
63"
VRPS
E4
46

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
771
911
1115
667
788
964
667
788
964
973
1222
1404
919
1155
1327
841
1038
1214
795
980
1147
3741
147.3
1311
51.6
1615
63.6
1524
60.0
64.0
1626
64.0
3828
150.7
1304
51.3
1657
65.2
1511
59.5
110.0
1626
64.0
3828
150.7
1304
51.3
1657
65.2
1511
59.5
110.0
1626
64.0
4022
158.3
1459
57.4
1710
67.3
1712
67.4
71.0
1780
70.0
VRF
VRDP
VRPS
44.00/5.0
41.00/5.0
4017
158.1
1467
57.8
1710
67.3
1712
67.4
116.0
1780
70.0
kPa
psi
36.00/5.0
VRF
VRPS
E/M
50
30
450
65
475
69
500
73
525
76
550
80
575
83
600
87
2
kg 67000 69000 71000 75000 77500 80000 82500
lbs 147500 152000 156500 165500 171000 176500 182000
2
kg 80000 82500 87500 90000 92500 95000 100000
lbs 176500 182000 193000 198500 204000 209500 220500
2
kg 77000 79000 84000 86000 89000 91000 96000
lbs 169300 174600 185200 190500 195800 201050 211650
53/80R63
63"
53/80R63
Tubeless
Star
Rating
Pattern
* 44.00/5.0 Rim
* 41.00/5.0 Rim
44.00/5.0
59/80R63
Tire Size
41.00/5.0
RADIAL TIRE 47
LI/SS
Industrial Service
20"
12.00R20
VCH
25"
16.00R25
Tubeless
18.00R25
Tubeless
23.5R25
Tubeless
33"
18.00R33
Tubeless
35/65R33
Tubeless
Inflation
Pressure
Tire Load Limits at Various Speeds
Size
315
12.4
512
20.2
360
14.2
29.5
380
15.0
Industrial
Service
1139
44.8
297
11.7
507
20.0
355
14.0
41.5
375
14.8
Industrial
Service
1254
49.4
323
12.7
558
22.0
376
14.8
29.5
Industrial
Service
1263
49.7
310
12.2
580
22.8
351
13.8
42.0
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
1357
53.4
1393
54.8
1412
55.6
383
15.1
390
15.4
383
15.1
630
24.8
610
24.0
626
24.6
410
16.1
460
18.1
445
17.5
23.5
450
17.7
480
18.9
480
18.9
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
Industrial
Service
1484
58.4
1500
59.1
1504
59.2
1531
60.3
1610
63.4
1609
63.3
1650
65.0
1681
66.2
440
17.3
435
17.1
435
17.1
448
17.6
515
20.3
515
20.3
504
19.8
512
20.2
690
27.2
668
25.8
674
26.5
713
28.1
733
28.9
727
28.6
707
27.8
730
28.7
475
18.7
500
19.8
500
19.7
488
17.6
565
22.2
571
22.5
596
23.5
592
23.3
22.5
178A5
VCH
VCHS
196A5
VCHS
196A5
VHB
VCHD
200A5
VCHR
200A5
VRLS
VHB
VEL
3
214A5
32.0
63.0
54.0
513
20.2
523
20.6
VCH
VCHS
IDU
Load 1000
Wheel 145
Steering 1000
Wheel 145
24"
VCH
IDU
VCHS
IDU
10.00W
VHB
VCH
VCHS
IDU
10.00VA
VCHS
IDU
11.25/2.0
25"
VHB
VRLS
IDU
8.50V
50.0
45.0
26.0
34.0
64.0
540
21.3
587
23.1
612
24.1
600
23.6
612
24.1
kPa
psi
8.50V
13.00/2.5
722
28.4
19.50/2.5
VSDL
IDU
Industrial
Service
Industrial
Service
Industrial
Service
1856
73.1
1860
73.2
2075
81.7
494
19.4
512
20.2
880
34.6
803
31.6
800
31.5
900
35.4
585
23.0
604
23.8
986
38.8
68.5
600
23.6
634
25.0
-
13.00/2.5
33"
VCHS
VELS
IDU
28.00/3.5
VSDL
IDU
VSDL
49.0
95.0
8875
19570
6570
14480
960
139
960
139
1000
145
1000
145
1000
145
1000
145
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
12420
27385
9935
21910
9750
21500
7500
16500
18000
39690
14400
31750
11040
24345
8830
19475
9750
21500
7500
16500
16000
35280
12800
28225
10005
22060
8005
17650
9750
21500
7500
16500
14500
31970
11600
25580
9315
20540
7450
16430
9750
21500
7500
16500
13500
29765
10800
23815
8970
19780
7175
15825
9750
21500
7500
16500
13000
28665
10400
22930
8765
19320
7010
15455
9750
21500
7500
16500
12700
28005
10160
22400
8625
19020
6900
15215
9750
21500
7500
16500
12500
27560
10000
22050
9375
20670
6935
15200
12400
27340
9920
21875
9375
20670
6935
15200
Load 1000
Wheel 145
Steering 1000
Wheel 145
kg
lbs
kg
lbs
18000
39690
14400
31750
16000
35280
12800
28225
14500
31970
11600
25580
13500
29765
10800
23815
13000
28665
10400
22930
12700
28005
10160
22400
12500
27560
10000
22050
12400
27340
9920
21875
Load
Wheel
Steering
Wheel
960
139
960
139
1000
145
kg
lbs
kg
lbs
kg
lbs
21870
48225
17495
38580
18200
40140
19440
42865
15550
34290
18200
40140
17615
38845
14095
31075
18200
40140
16400
36165
13120
28935
18200
40140
15795
34825
12635
27860
14000
30900
15430
34025
12345
27220
14000
30900
15185
33490
12150
26790
14000
30900
15065
33220
12050
26575
12460 12460
27475 27475
kg
lbs
kg
lbs
30600
67475
24480
53980
27200
59975
21760
47980
24650
54355
19720
43480
22950
50605
18360
40485
22100
48730
17680
38985
21590
47605
17270
38085
21250
46855
17000
37485
21080
46480
16865
37185
kg
lbs
kg
lbs
kg
lbs
kg
lbs
28800
63505
23040
50805
26100
57550
20880
46040
25600
56450
20480
45160
23200
51155
18560
40925
23200
51155
18560
40925
21025
46360
16820
37090
21600
47630
17280
38100
19575
43160
15660
34530
20800
45865
16640
36690
18850
41565
15080
33250
20320
44805
16255
35845
18415
40605
14730
32485
20000
44100
16000
35280
18125
39965
14500
31970
19840
43745
15870
34995
17980
39645
14385
31715
kg 35100 31200 28275

lbs 77395 68795 62345
kg 28080 24960 22620
lbs 61915 55035 49875
kg 50400 44800 40600
lbs 111130 98785 89525
kg 40320 35840 32480
lbs 88905 79025 71620
26325
58045
21060
46435
37800
83350
30240
66680
25350
55895
20280
44715
36400
80260
29120
64210
24765
54605
19810
43685
35560
78410
28450
62725
24375
53745
19500
42995
35000
77175
28000
61740
24180
53315
19345
42655
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
3
Load
Wheel
Steering
Wheel
960
139
960
139
690
100
690
100
87.0
VELS
8875
19570
6570
14480
687
27.0
219A5
9230
20350
7100
15620
IDU
755
29.7
35
22
9230
20350
7100
15620
VSMS
608
23.9
30
19
9230
20350
7100
15620
Load 1000
Wheel 145
Steering 1000
Wheel 145
1672
65.8
25
15
9230
20350
7100
15620
Industrial
Service
20
12
9230
20350
7100
15620
IDU
15
9
9230
20350
7100
15620
VHB
VEL
VCHS
VSDL
84.5
10
5
9230
20350
7100
15620
IDU
5
3
kg
lbs
kg
lbs
VCHD
VCHR
VSMS
km/h 0 Creep
mph Static Creep
Load
Wheel
Steering
Wheel
2
Load
Wheel
Steering
Wheel
3
Load 1000
Wheel 145
Steering 1000
Wheel 145
2
Load
780
Wheel 113
Steering 780
Wheel 113
12.00R20
1140
44.9
*Compliant with the ETRTO

standard of industrial tires
12.00R24
Industrial
Service
VCHS
Star
Rating
14.00R24
176A5
VHB
VCHS
Pattern Application
14.00R24 TG
14.00R24 TG
Tubeless
mm
Recommended
Minimum
mm
inch
inch
*Compliant with the ETRTO

standard of industrial tires
(For straddle carrier use only)
16.00R25
14.00R24
OTD
Industrial Service
20"
VCH
VCHS

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
18.00R25
24"
12.00R24
TRA Code
or
Application
23.5R25
VCHS
Star
Rating
18.00R33
Pattern
35/65R33
Tire Size
Off-the-Road Tires Used for Industrial Vehicle Applications

1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log stackers etc.,
used on hard improved surfaces, smooth floors and runways.
2) Use Specifications of Industrial Service only.
48
3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).

4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative.
5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.
RADIAL TIRE 49
1357
53.4
383
15.1
630
24.8
410
16.1
23.5
450
17.7
VHS
170E
1356
53.4
384
15.1
626
24.6
422
16.6
23.0
450
17.7
VHS
170E
170F
1356
53.4
384
15.1
626
24.6
422
16.6
23.0
450
17.7
VSW
170E
1355
53.3
394
15.5
631
24.8
427
16.8
23.5
450
17.7
VHB
177E
1484
58.4
440
17.3
690
27.2
475
18.7
22.5
513
20.2
VHS
177E
174F
1484
58.4
435
17.1
684
26.9
480
18.9
25.5
513
20.2
VSW
177E
1484
58.4
435
17.1
695
27.4
476
18.7
23.0
513
20.2
445/80R25
Tubeless
VGT
170E
1339
52.7
440
17.3
610
24.0
485
19.1
24.0
505/95R25
Tubeless
VHB
186E
1590
62.6
510
20.1
778
30.6
565
22.2
26.0
587
23.1
VHS
186E
1593
62.7
505
19.9
727
28.6
565
22.2
26.0
587
23.1
VHS
176F
1480
58.3
537
21.1
677
26.7
578
22.8
31.0
LI/SS
TRA Code
or
Application
25"
385/95R25
Tubeless
445/95R25
Tubeless
525/80R25
Tubeless
Tire Size
Pattern
Logging Service
24"
14.00R24
VSB

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
10.00W
25"
VHS
VSW
(170E)
VHS
(170F)
VSB
50
Size
*Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).

km/h 0 Creep
mph Static Creep
5
3
10
5
15
9
20
12
30
19
40
25
50
31
60
37
70
43
80
50
90
56
100
62
kg
lbs
17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
High-Speed
900
131
kg
lbs
17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
High-Speed
900
131
kg
lbs
15000
33070
VHB
VHS
VSW
(177E)
High-Speed
900
131
kg
lbs
21500 17500 15500 13400 12000 10800 9500 9050 8600 8100 7300 6000 5100 4375
47500 38500 34200 29600 26400 23800 20900 20000 19000 18000 16100 13200 11300 9650
VHS
(174F)
High-Speed
900
131
kg
lbs
16750
36930
14.00/1.5
VGT
High-Speed
700
102
kg
lbs
17700 14400 12700 11000 9850 8900 7800 7450 7100 6700 6000 4925 4200 3600
39000 31700 28100 24300 21700 19600 17200 16400 15600 14800 13200 10800 9250 7950
13.00/2.5
VHB
VHS
High-Speed
900
131
kg
lbs
28000 22700 20200 17500 15600 14100 12300 11800 11200 10600 9500 7800 6650 5700
61800 50200 44500 38500 34300 31000 27200 26000 24700 23400 20900 17200 14700 12600
17.00/2.0
VHS
High-Speed
700
102
kg
lbs
22900 18600 16500 14300 12700 11500 10100 9600 9150 8700 7750 7100 5400 4650
50400 40900 36300 31400 28000 25300 22200 21200 20200 19100 17100 15600 12000 10200
10.00/1.5
11.25/2.0
Recommended
Minimum
mm
inch
inch
Application
Max.Speed
Pattern
km/h
mph
12600 10800 9900 9000 7500 6900 6720 6600 6300 6000 5640 5100
27780 23810 21830 19850 16540 15220 14820 14560 13890 13230 12440 11250
14070 12060 11055 10050 8375 7705 7505 7370 7035 6700 6300 5695
31020 26590 24380 22160 18470 16990 16550 16250 15510 14780 13890 12560
Size
Logging Service
24"
Truck, Trailers
1365
53.7
387
15.2
628
24.7
433
17.0
21.0
450
17.7
kPa
psi
10.00W
Truck, Trailers
1365
53.7
387
15.2
628
24.7
433
17.0
21.0
450
17.7
10.00
25"
VSB
450
65
Truck, Load
Trailers Range
kg
90
Dual
lbs
55
kg
Single
lbs
Truck,
Trailers
90
55
USA use only
Pressure

24"
kPa
psi
VHB
High-Speed
900
VHS
131
VSB
25"
14.00R25
Tubeless
Inflation
Application
385/95R24
Pattern
385/95R25
mm
Recommended
Minimum
mm
inch
inch
445/95R25
OTD
445/80R25

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
505/95R25

24"
385/95R24
VHB
170E
TRA Code
or
Application
525/80R25
LI/SS
kg
lbs
kg
lbs
480
70
520
75
550
80
590
85
620
90
660
95
690
100
720
105
760
110
790
115
L
3610
7960
3700
8150
3780
8340
3910
8620
3950
8710
4110
9070
4110
9070
4310
9500
4270
9410
4500
9930
4420
9750
4690
10340
4580
10090
4870
10730
4750
10500
5150
11400
4880
10800
5300
11700
5010
11100
5450
12000
5150
11400
5600
12300
3610
7960
3700
Single
8150
3780
8340
3910
8620
3950
8710
4110
9070
4110
9070
4310
9500
4270
9410
4500
9930
4420
9750
4690
10340
4580
10090
4870
10730
4750
10500
5150
11400
4880
10800
5300
11700
5010
11100
5450
12000
5150
11400
5600
12300
Dual
14.00R24
Pattern
14.00R25
Tire Size
USA use only
RADIAL TIRE 51
Sand Service
20"
16.00R20
Tubeless 1
LI/SS
Star
Rating
TRA Code
or
Application

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Recommended
Minimum
mm
inch
inch
Ply
VSJ
28
E7
1315
51.8
414
16.3
590
23.2
475
18.7
18.5
520
20.5
E7
1728
68.0
584
23.0
784
30.9
649
25.6
22.5
685
27.0
15.00/3.0
Tire Cold Inflation Pressures at Various Load Limits
kg
lbs
VSJ
Sand
25"
VSJ
Sand
Size
*It is Recommended that 90% of the below indicated loads per tire is to be applied when used on a dual axle.
10.00V
10.00W
VSJ
Max.
Rating Speed
Sand Service
20"
16.00R20
25"
21.00R25
Tubeless
Pattern Application
28PR 65km/h
40mph
50km/h
30mph
16km/h
10mph
65km/h
40mph
50km/h
30mph
16km/h
10mph
kPa
psi
kPa
psi
kPa
psi
kPa
psi
kPa
psi
kPa
psi
4250 4500 4750 5000 5250 5500 6000 7000 8000 8500 9000 9500
9370 9920 10470 11020 11570 12130 13230 15430 17640 18740 19840 20940
490
71
390
57
280
41
540
78
420
61
300
44
580
84
450
65
320
47
630
91
490
71
350
51
680
98
720
105
16.00R20
Pattern
330
48
260
38
200
28
410
60
320
47
230
34
490
71
390
57
280
41
540
78
420
61
300
44
590
85
630
92
21.00R25
Tire Size
1 When you mount 16.00R20 VSJ tubeless tire on flat base rim (10.00V), installation of sealing ring is recommended.
For further information, please consult a Bridgestone representative.
52
RADIAL TIRE 53
BIAS TIRE
1. Tread Designs
Earthmover Service
E3
W-LUG
(WL)
R-LUG
(RL)
Sand Service
L4
E4
V-LUG2
(VL2)
R-LUG S
(RLS)
E-LUG S2
(ELS2)
Grader Service
E7
RIB GRADER
(RG)
G2
G-LUG
(GL)
C1
R-LUG
(RL)
54
SMOOTH TREAD-MS
(STMS)
ALLIGATOR2
(AL2)
Industrial Service
L2
G-LUG
(GL)
D-LUG
(DL)
C2
ROAD ROLLER
(RR)
FAST GRIP
(FG)
G3
N-LUG
(NL)
L5S
Compactor Service
G1
SAND CLIPPER-2
(SCP2)
R-LUG S
(RLS)
L5
L3
FAST GRIP
(FG)
R-LUG
(RL)
V-LUG2
(VL2)
R-LUG
(RL)
R-LUG S
(RLS)
E-LUG S2
(ELS2)
SMOOTH TREAD-MS
(STMS)
YARD SERVICE-2
(YS2)
BIAS TIRE 55
2. Application
Earthmover Service
Grader Service
HEAT RESISTANT
GL
CUT RESISTANT
TRACTION
CUT RESISTANT
TRACTION
HEAT RESISTANT
FG
RL
Size
Type
Size
Ply Rating
WL(E3)
9.00-20
T/T
14
9.00-20
T/T
T/T
T/T
T/T
T/T
T/L
T/L
T/L
14
14
18
20
24 28
28
32
36
T/L
T/L
T/L
T/L
16 20
16 20 24
20 24 26
22 28
9.00-20
Ply Rating
T/T
10
T/T
14
T/L
T/T
T/L
T/T
T/T
T/L
T/L
T/T
12
10
12 14
12 16
16
12
12
12
T/T
16
FG(G2)
13.00-24 TG
14.00-24 TG
16.00-24 TG
17.5-25
20.5-25
RL(G3)
16.00-24 TG
T/T: Tube Type

T/L: Tubeless Type
56
Type
GL(G2)
VL2(E3)
20.5-25
23.5-25
26.5-25
29.5-25
RL
RG(G1)
RL(E3)
10.00-20
11.00-20
12.00-20
12.00-24
14.00-24
16.00-25
18.00-25
37.25-35
RG
ROCK
VL2
ROCK
WL
T/T: Tube Type

T/L: Tubeless Type
BIAS TIRE 57

HEAT RESISTANT
CUT RESISTANT
FGF
NL
VL2
RL
Size
Type
Ply Rating
T/T
14
FG(L2)
23x8.50-12
27x8.50-15
33x12.5-15
12.5/70-16
10-16.5
12-16.5
15.5/60-18
15.5/70-18
10.00-20
11.00-20
42x17-20
17.5/65-20
13.00-24 TG
14.00-24 TG
16.9-24
18.4-24
17.5-25
20.5-25
Type
10.00-20
Ply Rating
4
4
8
68
68
8 10
8
8
8
10 14
10 16
10
10
12
12
12
12
10
10
12
12
12
12.00-24
14.00-24
16.00-24 TG
Type
Ply Rating
VL2(L3)
T/T
16
15.5-25
17.5-25
T/T
T/T
T/T
20
24
16
20.5-25
23.5-25
26.5-25
29.5-25
T/L
T/L
T/T
T/L
T/T
T/L
T/T
T/L
T/T
T/L
12
16
16
16 20
16 20
16 20 24
16 20 24
T/T
T/L
T/L
20
26
28
20 24 26
24
22 28
RLS(L4)
14.00-24
26.5-25
29.5-25
T/T: Tube Type

T/L: Tubeless Type
58
STMS
Size
RL(L3)
T/T
T/T
T/T
T/L
T/L
T/L
T/T
T/L
T/L
T/T
T/T
T/T
T/L
T/L
T/T
T/L
T/T
T/T
T/T
T/L
T/L
T/T
DL
RLS
FGF(L2)
GL(L2)
9.00-20
Size
ROCK
FG
ROCK
GL
TRACTION
CUT RESISTANT
TRACTION
HEAT RESISTANT
Size
NL(L4)
35/65-33
Type
Ply Rating
T/L
24
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
T/L
16
12 16
20
28
42
56
58
62
62
Type
Ply Rating
T/T
T/T
T/L
T/L
T/L
T/L
16 20
20
20
24 28 32
32 36
34
STMS(L5S)
DL(L5)
17.5-25
20.5-25
23.5-25
29.5-25
35/65-33
40/65-39
45/65-45
50/65-51
65/65-57
Size
12.00-24
14.00-24
17.5-25
18.00-25
26.5-25
29.5-29
T/T: Tube Type

T/L: Tubeless Type
BIAS TIRE 59
Compactor Service
Size
Type
Industrial Service
Ply Rating
RR
10.5/80-16
9.00-20
14/70-20
Type
Ply Rating
12.00-20
14.00-24
14.00-24 TG
16.00-25
T/T
T/T
T/L
T/L
T/T
T/L
T/L
T/L
20
24 28
24
28 32
28
40
40
40
T/L
28 32
T/L
T/L
T/L
40
36
40
T/T
T/L
20
40
T/L
32
RL
RR(C1)
7.50-15
9.5/65-15
7.50-16
Size
T/T
T/T
T/L
T/T
T/L
T/T
T/T
12
6
6
6
6
10
12
T/T
RL
18.00-25
21.00-25
21.00-35
AL2(C2)
23.1-26
RLS
16.00-25
AL2
RLS
ELS2
18.00-25
18.00-33
21.00-35
Sand Service
SCP2(E7)
14.00-20
ELS2
T/T
18
SCP2
STMS
12.00-24
18.00-25
STMS
YS2
16.00-25
YS2
T/T: Tube Type

T/L: Tubeless Type
60
T/T: Tube Type

T/L: Tubeless Type
BIAS TIRE 61
3. Technical Data
Ply
Rating
TRA Code
or
Application
Spec
L2
TKPH TMPH

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
5JA
Pattern
inch
576
22.7
215
8.5
265
10.4
223
8.8
14.5
240
35
260
38
PR
kg
lbs
4
550 585 620 655 685
1210 1290 1365 1445 1510
360
14.2
225
8.9
250
9.8
6.00GS
kPa
psi
350
51
FG
L2
686
27.0
208
8.2
317
12.5
218
8.6
16.5
7JA
671
26.4
238
9.4
312
12.3
242
9.5
7JA
33x12.5-15
FG
L2
851
33.5
318
12.5
TBA
TBA
TBA
TBA
22.5
10.00F
RR
FG
RR
C1
7.50-16
814
32.0
225
8.9
379
14.9
243
9.6
776
30.6
214
8.4
361
14.2
224
8.8
250
9.8
6.00GS
6LB
16"
RR
10.5/80-16
Tubeless
RR
C1
812
32.0
272
10.7
376
14.8
282
11.1
8LB
RR
12.5/70-16
Tubeless
FG
6
8
L2
860
33.9
319
12.6
389
15.3
336
13.2
21.0
10LB
FG
FG
6
8
L2
771
30.4
268
10.6
353
13.9
278
10.9
19.5
8.25
16.5"
FG
FG
8
10
L2
831
32.7
315
12.4
376
14.8
325
12.8
20.0
9.75
FG
12-16.5
Compactor PR
10
kg
5
lbs
kPa
psi
Loader
PR
10
kg
5
lbs
Compactor PR
10
kg
5
lbs
kPa
psi
Loader
PR
10
kg
5
lbs
375
54
400
58
425
62
450
65
475
69
Loader
10
5
Loader
10
5
PR
kg
lbs
PR
kg
lbs
525
76
550
80
575
84
600
87
625
91
180
26
200
29
220
32
240
35
260
38
280
41
300
44
L2
932
36.7
391
15.4
416
16.4
404
15.9
21.5
W10
18"
FG
FG
L2
1035
40.7
405
15.9
459
18.1
424
16.7
20.5
W13
FG
Loader
10
5
PR
kg
lbs
PR
kg
lbs
675
98
700
102
725
105
325
47
4
695 740 780 820 860
1530 1630 1720 1805 1895
6
1100 1155 1205 1255 1315
2430 2550 2560 2770 2900
120
17
140
20
160
23
180
26
200
29
220
32
240
35
260
38
280
41
300
44
325
47
350
51
375
54
400
58
425
62
450
65
8
1510 1605 1695 1785 1870 1950 2035 2130
3330 3540 3735 3935 4125 4300 4485 4695
6
1405 1470 1535 1600 1675 1750 1820 1890
3100 3240 3380 3530 3690 3860 4010 4170
6
1645 1725 1800 1875
3630 3800 3970 4130
6
8
1050 1145 1240 1330 1410 1495 1570 1645
2315 2525 2735 2930 3110 3295 3460 3625
6
8
1140 1215 1285 1350 1415 1475 1540 1610 1685 1750 1820
2515 2680 2830 2975 3120 3250 3395 3550 3715 3860 4010
8
1470 1565 1655 1740 1820 1905 1980 2075 2170
3240 3450 3650 3835 4010 4200 4365 4575 4785
FG
650
94
750
109
12
1700 1750 1850 1900 1950 2060 2120 2180 2240 2300 2300 2360 2430 2500 2575 2575 2650
3740 3860 4080 4180 4300 4540 4680 4800 4940 5080 5080 5200 5360 5520 5680 5680 5840
C1
PR
Compactor
kg
10
lbs
5
PR
kg
lbs
PR
kg
lbs
500
73
7.50-15
209
8.2
27x8.50-15
775
30.5
9.5/65-15
8
1525 1670 1805 1935 2060 2195
3360 3680 3980 4265 4540 4840
8
1725 1885 2040 2185 2325 2455
3800 4155 4495 4815 5125 5410
33x12.5-15
C1
15.5/70-18
Tubeless
220
32
7.50-16
18"
15.5/60-18
Tubeless
200
29
12.5/70-16 10.5/80-16
C1
RR
12-16.5
Tubeless
180
26
10-16.5
12
9.5/65-15
16.5"
10-16.5
Tubeless
Loader
10
5
kPa
psi
15"
RR
FG
16"
7.50-16
Tubeless
Size
23x8.50-12
RR
27x8.50-15
12"
FG
FG
15"
7.50-15
Application
Max.Speed
km/h
mph
10
2540
5600
12-16.5
12"
23x8.50-12
Pattern
15.5/70-18 15.5/60-18
Tire Size
62
BIAS TIRE 63
Ply
Rating
TRA Code
or
Application
Spec
TKPH TMPH

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
7.00T
Pattern
inch
1023
40.3
267
10.5
473
18.6
291
11.5
15.0
RR
10
C1
1005
39.6
265
10.4
458
18.0
297
11.7
310
12.2
RG
GL
GL
14
G2, L2
1023
40.3
255
10.0
478
18.8
276
10.9
21.0
WL
14
E3
SCR
1027
40.4
257
10.1
466
18.3
280
11.0
19.5
310
12.2
FG
10
14
L2
1064
41.9
281
11.1
479
18.9
307
12.1
24.0
FGF
16
L2
1057
41.6
276
10.9
478
18.8
302
11.9
18.0
334
13.1
RL
14
E3
CRT
42
29
1067
42.0
285
11.2
489
19.3
304
12.0
22.5
FG
10
16
L2
1100
43.3
299
11.8
510
20.0
323
12.7
24.5
352
13.9
14
E3
CRT
49
34
1091
43.0
296
11.7
514
20.2
311
12.2
24.0
FG
FGF
RL
18
E3
SCR
52
36
1138
44.8
316
12.4
513
20.2
331
13.0
25.5
14.00-20
SCP2
18
Industrial
Service
IDU
E7
Loader
10
5
E/M
50
30
Loader
10
5
344
13.5
382
15.0
E/M
50
30
8.50V
RL
20
E/M
50
30
8.00V
RL
RL
Compactor
10
5
Loader
10
5
7.50V
FG
RL
Grader
40
25
RL
E/M
50
30
IDU
kPa
psi
140
20
160
23
PR
kg
lbs
10
14
955 1035 1110 1180 1245 1310 1375 1435 1495 1565 1635 1705 1780 1850 1910 1965 2025
2110 2280 2450 2600 2740 2890 3040 3160 3300 3460 3600 3760 3920 4060 4210 4340 4480
kPa
psi
350
51
PR
kg
lbs
PR
kg
lbs
10
2900 3000 3150 3250 3350 3450 3550 3650
6400 6600 6950 7150 7400 7600 7850 8050
kPa
psi
200
29
PR
kg
lbs
14
1280 1350 1420 1490 1555 1620 1695 1770 1845 1915 1985 2055 2120 2185 2245 2310
2820 2980 3130 3280 3430 3570 3740 3900 4070 4220 4380 4530 4670 4820 4950 5090
kPa
psi
475
69
PR
kg
lbs
10
14
16
3550 3650 3750 3875 4000 4125 4125 4250 4345 4440 4530 4620
7850 8050 8250 8550 8800 9100 9100 9350 9580 9790 9990 10180
kPa
psi
200
29
PR
kg
lbs
14
1445 1530 1610 1685 1760 1830 1920 2005 2085 2170 2245 2320 2395 2470
3190 3370 3550 3710 3880 4030 4230 4420 4600 4780 4950 5110 5280 5450
kPa
psi
450
65
PR
kg
lbs
10
16
3750 3875 4000 4125 4250 4250 4375 4500 4675 4780 4880
8300 8550 8800 9100 9350 9350 9650 9900 10300 10540 10740
kPa
psi
200
29
PR
kg
lbs
14
1570 1660 1750 1830 1910 1990 2085 2180 2270 2355 2440 2525 2605
3460 3660 3860 4030 4210 4390 4600 4810 5000 5190 5380 5570 5740
kPa
psi
275
40
PR
kg
lbs
18
2180 2300 2430 2500 2650 2725 2800 2900 3000 3075
4800 5080 5360 5520 5840 6000 6150 6400 6600 6800
375
54
180
26
400
58
200
29
425
62
220
32
450
65
240
35
475
69
220
32
500
73
220
32
475
69
220
32
300
44
240
35
525
76
240
35
500
73
240
35
325
47
260
38
550
80
260
38
525
76
260
38
350
51
280
41
575
83
280
41
550
80
280
41
375
54
300
44
600
87
300
44
575
83
300
44
400
58
RR
12
C1
SCP2
970
38.2
380
15.0
448
17.6
392
15.4
64
550
80
325
47
575
83
350
51
600
87
375
54
625
91
325
47
625
91
325
47
600
87
325
47
425
62
350
51
650
94
350
51
625
91
350
51
450
65
375
54
675
98
375
54
650
94
375
54
475
69
400
58
700
102
400
58
675
98
400
58
425
62
725
105
425
62
450
65
400
58
650
94
425
62
675
98
450
65
475
69
500
73
700
102
475
69
500
73
525
76
550
80
750
109
450
65
475
69
500
73
700
102
425
62
450
65
475
69
500
73
Sand
kPa
psi
11.00TG
RR
525
76
300
44
14/70-20
500
73
280
41
14
3150 3250 3350 3450 3450 3550 3630 3710 3790 3875
6950 7150 7400 7600 7600 7850 8000 8190 8360 8550
260
38
9.00-20
10.00-20
11.00-20
G1
WL
12.00-20
Size
12.00-20
10
GL
11.00-20
20"
RG
RR
10.00-20
Application
Max.Speed
km/h
mph
Compactor PR
10
kg
5
lbs
240
35
260
38
280
41
300
44
325
47
350
51
375
54
400
58
425
62
450
65
12
2775 2905 3035 3160 3310 3460 3600 3740 3875 4005
6100 6400 6700 6950 7300 7650 7950 8250 8550 8850
14.00-20
20"
9.00-20
Pattern
14/70-20
Tire Size
BIAS TIRE 65
Spec
FG
10
L2
TKPH TMPH
-

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1077
431
TBA
TBA
42.4
17.0
TBA
TBA
OTD
mm
25.5
Minimum
Dual Spacing
mm
inch
-
Recommended
Rim/Flange Height
Pattern
inch
14.00TG
FG
24"
12.00-24
FG
10
L2
1107
43.6
450
17.7
TBA
TBA
TBA
TBA
25.0
W14L
RL
20
E3
L3
DE2
66
-
45
-
1238
48.7
326
12.8
576
22.7
341
13.4
24.5
8.5
8.50V
FG
STMS
16
20
L5S
D2A
1275
50.2
321
12.6
606
23.9
339
13.3
55.0
FG
Industrial
Service
IDU
12
G2
G2, L2
G2A
DG2
10
12
G2
L2
G2A
D2A
STMS
120
17
140
20
160
23
180
26
200
29
220
32
PR
kg
lbs
PR
kg
lbs
10
2740 2915 3080 3240 3395 3545 3690
6040 6425 6790 7140 7485 7815 8135
10
2130 2330 2520 2700 2875 3040 3195
4695 5135 5555 5950 6340 6700 7045
kPa
psi
475
69
PR
kg
lbs
20
3350 3450 3550 3650
7400 7600 7850 8050
kPa
psi
475
69
240
35
260
38
280
41
300
44
RLS
STMS
28
24
E3
E2A
109
75
D2A
IDU
28
L3
Industrial
Service
20
L4
D2A
20
L5S
500
73
525
76
525
76
550
80
550
80
575
83
600
87
1286
50.6
340
13.4
588
23.1
374
14.7
28.0
1366
53.8
387
15.2
627
24.7
400
15.7
28.0
8.00TG
(10.00VA)
450
17.7
D2A
RL
1407
55.4
390
15.4
646
25.4
440
17.3
48.0
1373
54.1
367
14.4
646
25.4
391
15.4
78.0
450
17.7
-
Grader
40
25
Loader
10
5
10.00W
625
91
650
94
675
98
700
102
725
105
750
109
775
112
800
115
825
120
PR
16
20
kg
5000 5150 5300 5450 5600 5600 5800 6000 6150 6270 6410 6540 6660 6780 6900
lbs 11000 11400 11700 12000 12300 12300 12800 13200 13600 13790 14100 14390 14700 14900 15200
FG
RL
Loader
10
5
IDU
500
73
FG
13.00-24 TG
E/M
50
30
8.5
8.50V
RL
STMS
14.00-24
kPa
psi
Size
24"
RL
13.00-24 TG
Tubeless
Loader
10
5
Loader
10
5
12.00-24
17.5/65-20
Tubeless
Application
Max.Speed
km/h
mph
42x17-20
TRA Code
or
Application
17.5/65-20
Ply
Rating
E/M
50
30
kPa
psi
125
18
PR
kg
lbs
PR
kg
lbs
10
12
1700 1900 2060 2240 2360 2500 2650 2725
3740 4180 4540 4940 5200 5520 5840 6000
kPa
psi
275
40
PR
kg
lbs
24
28
3350 3550 3750 3875 4000 4250 4375 4500 4625 4750 4875 5000 5150 5300 5450 5600
7400 7850 8250 8550 8800 9350 9650 9900 10200 10500 10700 11000 11400 11700 12000 12300
kPa
psi
10.00W
RL
RLS
STMS
RL
Loader
10
5
IDU
PR
kg
lbs
150
22
175
25
200
29
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
13.00-24 TG
42x17-20
Pattern
12
4500 4750 5000 5150 5300 5600
9900 10500 11000 11400 11700 12300
300
44
325
47
350
51
375
54
400
58
425
62
575
83
450
65
600
87
475
69
625
91
500
73
650
94
525
76
675
98
550
80
700
102
575
83
725
105
600
87
750
109
625
91
775
112
650
94
800
115
825
120
850
124
20
24
7500 7750 8000 8250 8250 8500 8670 8830 9000 9170 9330 9500
16500 17100 17600 18200 18200 18700 19100 19500 19800 20200 20600 21000
14.00-24
Tire Size

66
BIAS TIRE 67
Spec
14.00-24 TG
Tubeless
FG
14
G2
G2A
12
G2, L2
DG2
24
Industrial
Service
IDU
G2
G2A
TKPH TMPH

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1336
365
610
392
52.6
14.4
24.0
15.4
OTD
mm
31.0
Minimum
Dual Spacing
mm
inch
-
Recommended
Rim/Flange Height
Pattern
inch
8.00TG
(10.00VA)
FG
1336
52.6
365
14.4
610
24.0
392
15.4
8.00TG
10.00VA
FG
RL
RL
FG
12
1336
52.6
16
16.9-24
610
24.0
390
15.4
12
L2
D2A
FG
16
G2
G2A
RL
16
G3, L3
DG2
FG
10
L2
392
15.4
31.0
10.00VA
(8.00TG)
10.00VA
390
15.4
610
24.0
417
16.4
1453
57.2
438
17.2
638
25.1
500
19.7
32.5
1478
58.2
419
16.5
671
26.4
446
17.6
33.5
513
20.2
1320
52.0
447
17.6
591
23.3
462
18.2
30.5
10.00VA
FG
RL
RL
FG
10
L2
1385
54.5
483
19.0
612
24.1
516
20.3
32.5
W16L
25"
15.5-25
Tubeless
VL2
12
L3
D2A
1284
50.6
410
15.6
568
22.4
448
17.6
27.0
12.00/1.3
FG
175
25
200
29
225
33
250
36
275
40
300
44
325
47
350
51
PR
kg
lbs
PR
kg
lbs
12
14
16
2060 2300 2500 2650 2800 3075 3250 3450 3550 3650
4540 5080 5520 5840 6150 6800 7150 7600 7850 8050
375
54
400
58
425
62
12
6300
13900
Loader
L2
10
5
L2
PR
kg
lbs
PR
kg
lbs
16
2650 3000 3250 3450 3650 4000 4250 4500
5840 6600 7150 7600 8050 8800 9350 9900
kPa
psi
120
17
PR
kg
lbs
PR
kg
lbs
10
2300 2520 2725 2920 3105 3280 3455
5070 5555 6005 6435 6845 7230 7615
10
2765 3025 3270 3505 3725 3940
6095 6670 7210 7725 8210 8685
kPa
psi
225
33
PR
kg
lbs
PR
kg
lbs
12
4000 4250 4500 4750 4875 5150 5300 5600
8800 9350 9900 10500 10700 11400 11700 12300
16
7100 7300 7750 8000 8250
15700 16100 17100 17600 18200
140
20
160
23
180
26
200
29
220
32
240
35
25"
VL2
RL
28
E3
E2A
139
95
28
32
Industrial
Service
IDU
RLS
28
32
Industrial
Service
IDU
YS2
32
Industrial
Service
IDU
RL
28
Industrial
Service
IDU
68
Grader
40
25
Loader
10
5
W15L
18.4-24
16.00-25
150
22
FG
16.00-25
Tubeless
125
18
8.00TG
(10.00VA)
417
16.4
1330
52.3
kPa
psi
Size
1478
58.2
432
17.0
671
26.4
459
18.1
33.5
513
20.2
11.25/2.0
RL
RL
RLS
YS2
Loader
10
5
E/M
50
30
IDU
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
15.5-25
16.00-24 TG
365
14.4
Grader
40
25
Loader
10
5
IDU
28
4375 4625 4875 5000 5300 5450 5600 5800 6000 6300 6500 6500 6700
9650 10200 10700 11000 11700 12000 12300 12800 13200 13900 14300 14300 14800
16.00-25
14.00-24 TG
Application
Max.Speed
km/h
mph
14.00-24 TG
TRA Code
or
Application
16.00-24 TG
Ply
Rating
16.9-24
Pattern
18.4-24
Tire Size
BIAS TIRE 69
Spec
FG
12
G2, L2
DG2
VL2
16
L3
D2A
1348
53.1
444
17.5
597
23.5
470
18.5
30.5
DL
16
L5
D2A
1410
55.5
445
17.5
656
25.8
470
18.5
69.5
STMS
20
L5S
D2A
D2Z
1385
54.5
450
17.7
645
25.4
462
18.2
69.0
TKPH TMPH
OTD
mm
27.5
Recommended
Rim/Flange Height
Pattern
inch
14.00/1.5
FG
17.5-25
VL2
16
L3
D2A
1348
53.1
444
17.5
597
23.5
470
18.5
30.5
18.00-25
Tubeless
RL
32
E3
E2A
173
118
1602
63.1
503
19.8
727
28.6
572
22.5
37.5
587
23.1
40
Industrial
Service
IDU
ELS2
40
Industrial
Service
IDU
STMS
24
28
32
40
L5S
D2A
Industrial
Service
IDU
G2, L2
DG2
1493
58.8
534
21.0
652
25.7
551
21.7
29.5
E3
L3
DE2
80
-
55
-
1494
58.8
542
21.3
641
25.2
587
23.1
33.0
20.5-25
Tubeless
FG
VL2
12
16
20
21.00-25
Tubeless
kPa
psi
125
18
PR
kg
lbs
12
2120 2360 2575 2900
4680 5200 5680 6400
kPa
psi
13.00/2.5
FG
VL2
DL
STMS
Loader
10
5
RL
E/M
50
30
STMS
520
20.5
762
30.0
550
21.7
84.0
175
25
200
29
13.00/2.5
RL
ELS2
STMS
Loader
10
5
IDU
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
PR
12
16
20
kg
4750 5000 5300 5600 5800 6150 6300 6700 6900 7100 7300 7500 7750 8000 8250
lbs 10500 11000 11700 12300 12800 13600 13900 14800 15200 15700 16100 16500 17100 17600 18200
PR
kg
lbs
kPa
psi
1675
65.9
150
22
Size
32
5600 6000 6300 6500 6900 7100 7300 7500 7750 8000 8250 8500 8750
12300 13200 13900 14300 15200 15700 16100 16500 17100 17600 18200 18700 19300
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
725
105
750
109
PR
24
28
32
kg 10000 10450 10900 11500 11500 11800 12150 12500 12850 13200 13600 13600 14000 14500 14500 15000
lbs 22000 23000 24000 25400 25400 26000 26800 27600 28300 29100 30000 30000 30900 32000 32000 33100

DL
12
16
L5
D2A
1558
61.3
548
21.6
714
28.1
570
22.4
79.5
FG
12
G2, L2
DG2
1493
58.8
534
21.0
652
25.7
551
21.7
29.5
VL2
16
20
L3
D2A
1494
58.8
542
21.3
641
25.2
587
23.1
33.0
RL
40
Industrial
Service
IDU
70
Grader
40
25
17.00/1.7
(12,16PR)
17.00/2.0
VL2
FG
20.5-25
Application
Max.Speed
km/h
mph
17.5-25
TRA Code
or
Application
18.00-25
Minimum
Dual Spacing
mm
inch
-
Ply
Rating
E/M
50
30
Grader
40
25
kPa
psi
125
18
150
22
175
25
200
29
225
33
250
36
275
40
300
44
325
47
PR
kg
lbs
PR
kg
lbs
16
20
4125 4500 4875 5150 5450 5800 6000
9100 9900 10700 11400 12000 12800 13200
12
2800 3150 3550
6150 6950 7850
350
51
375
54
400
58
425
62
450
65
20.5-25
17.5-25
Tubeless

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1345
450
596
472
53.0
17.7
23.5
18.6
Pattern
FG
VL2
DL
Loader
10
5
RL
IDU
PR
kg
lbs
12
16
20
6300 6700 7100 7500 7750 8250 8500 8750 9250 9500
13900 14800 15700 16500 17100 18200 18700 19300 20400 20900
21.00-25
Tire Size
BIAS TIRE 71
107
-
73
-

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
1607
618
682
688
63.3
24.3
26.9
27.1
OTD
mm
43.0
Minimum
Dual Spacing
mm
inch
-
16
20
24
20
E3
L3
DL
20
L5
D2A
1673
65.9
616
24.3
779
30.7
646
25.4
88.0
23.5-25
VL2
L3
D2A
1607
63.3
618
24.3
682
26.9
688
27.1
43.0
26.5-25
Tubeless
VL2
16
20
24
20
24
26
24
26
E3
L3
DE2
132
-
90
-
1738
68.4
683
26.9
745
29.3
734
28.9
44.0
RLS
DE2
TKPH TMPH
L4
D2A
D2A
1785
70.3
700
27.6
800
31.5
736
29.0
67.0
L5S
D2A
1798
70.8
680
26.8
827
32.6
719
28.3
95.0
26.5-25
VL2
24
L3
D2A
1738
68.4
683
26.9
745
29.3
734
28.9
44.0
29.5-25
Tubeless
VL2
E3
L3
DE2
150
-
103
-
1850
72.8
770
30.3
792
31.2
833
32.8
49.0
RLS
28
L4
D2A
1912
75.3
784
30.9
813
32.0
805
31.7
74.0
DL
28
L5
D2A
1900
74.8
768
30.2
873
34.4
805
31.7
105.5
AL2
C2
1472
58.0
595
23.4
654
25.7
618
24.3
19.0
VL2
22.00/3.0
25.00/3.5
35/65-33
Tubeless
200
29
225
33
PR
kg
8000
lbs
17600
PR
16
kg
5300 5800 6150
lbs 11700 12800 13600
250
36
275
40
300
44
16
8500 9000 9500
18700 19800 20900
20
6500 6900 7300
14300 15200 16100
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
20
24
10000 10600 10900 11200 11800 12150 12500
22000 23400 24000 24700 26000 26800 26700
24
7750 8000
17100 17600
VL2
RLS
STMS
Loader
10
5
PR
kg
lbs
20
24
26
32
12150 12500 13200 13600 14000 14500 15000 15500 16000 16500 17000
26800 27600 29100 30000 30900 32000 33100 34200 35300 36480 37500
VL2
E/M
50
30
Loader
10
5
PR
22
kg
8000 8750 9250 10000 10600
lbs 17600 19300 20400 22000 23400
PR
kg
12150 12850 13600
lbs
26800 28300 30000
28
10900 11500
24000 25400
22
28
14500 15000 16000 16500 17000 17500
32000 33100 35300 36480 37500 38600
VL2
RLS
DL
630
92
PR
20
24
26
kg
6700 7300 7750 8250 8750 9250 9500
lbs 14800 16100 17100 18200 19300 20400 20900
36
18600
41000
26"
Compactor PR
10
kg
5
lbs
110
16
23.1-26
kPa
psi
DW20A
DW20B
8
2850
6285
29"
34
L5S
D2A
D2Z
2023
79.6
749
29.5
931
36.7
792
31.2
103.0
kPa
psi
25.00/3.5
ELS2
36
Industrial
Service
IDU
33"
ELS2
Loader
10
5
225
33
250
36
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
29.5-29
STMS
PR
34
kg 12850 14000 14500 15500 16000 17000 17500 18000 19000 19500 20000 20600 21200
lbs 28300 30900 32000 34200 35300 37500 38600 39700 41900 43000 44100 45400 46700
IDU
NL
24
L4
D2V
2085
82.1
890
35.0
953
37.5
928
36.5
62.5
DL
42
L5
D2V
2075
81.7
896
35.3
979
38.5
945
37.2
97.0
97.0
72
Loader
10
5
E/M
50
30
175
25
Size
E/M
50
30
STMS
33"
18.00-33
Tubeless
VL2
AL2
29"
29.5-29
Tubeless
Application
Max.Speed
km/h
mph
kPa
psi
VL2
DL
32
36
26"
23.1-26
Pattern
inch
19.50/2.5
D2A
STMS
22
28
Recommended
Rim/Flange Height
23.5-25
Spec
26.5-25
TRA Code
or
Application
29.5-25
VL2
Ply
Rating
18.00-33
23.5-25
Tubeless
Pattern
kPa
psi
28.00/3.5
NL
DL
Loader
10
5
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
PR
24
42
kg 16500 17000 18000 19000 19500 20000 21200 21800 22400 23000 23600 24300 25000 25750 26500
lbs 36480 37500 39700 41900 43000 44100 46700 48100 49400 50700 52000 53600 55100 56800 58400
35/65-33
Tire Size
BIAS TIRE 73
TKPH TMPH
RL
40
Industrial
Service
IDU
ELS2
40
Industrial
Service
IDU
RL
36
E3
E1A
358
245

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
Pattern
Application
Max.Speed
km/h
mph
35"
RL
ELS2
IDU
inch
2330
91.7
955
37.6
1060
41.7
1000
39.4
51.5
kPa
psi
31.00/4.0
E/M
50
30
175
25
200
29
225
33
250
36
275
40
300
44
325
47
PR
36
kg 13600 14500 15500 16500 17500 18500 19500
lbs 30000 32000 34200 36400 38600 40800 43000
56
L5
D2V
2420
95.3
1020
40.2
1112
43.8
1070
42.1
106.5
kPa
psi
32.00/4.0
45"
45/65-45
Tubeless
DL
58
L5
D2V
2730
107.5
1146
45.1
1261
49.6
1185
46.6
116.0
36.00/4.5
45"
DL
51"
50/65-51
Tubeless
DL
62
L5
D2A
D2V
3070
120.9
1260
49.6
1412
55.6
1300
51.2
127.5
40.00/4.5
51"
DL
57"
65/65-57
Tubeless
DL
62
L5
D2V
3735
147.0
1640
64.6
1672
65.8
1706
67.2
142.5
52.00/6.0
57"
DL
275
40
300
44
325
47
350
51
375
54
400
58
425
62
450
65
475
69
500
73
525
76
550
80
575
83
600
87
625
91
650
94
675
98
700
102
Loader
10
5
PR
56
kg 22400 23600 25000 25750 27250 28000 29000 30000 30750 31500 32500 34500 34500 36500 37500 38750 40000 41250
lbs 49400 52000 55100 56800 60000 61500 64000 66000 68000 69500 71500 76100 76000 80500 82700 85400 88200 90900
Loader
10
5
PR
58
kg 30000 31500 32500 34500 35500 37500 38750 40000 41250 42500 43750 45000 46250 47250 48250 49250 50000
lbs 66000 69500 71500 76000 78500 82500 85500 88000 91000 93500 96500 99000 102000 104200 106400 108600 110000
Loader
10
5
PR
62
kg 37500 40000 42500 43750 46250 47500 48750 51500 53000 54500 56000 58000 58000 60000 61500 63000
lbs 82500 88000 93500 96500 102000 104500 107500 113500 117000 120000 123500 128000 128000 132500 135500 139000
Loader
10
5
PR
62
kg 67000 71000 73000 77500 80000 82500 87500 90000 92500 95000
lbs 147500 156500 161000 171000 176500 182000 193000 198500 204000 209500
40/65-39
39"
DL
DL
74
Size
RL
39"
40/65-39
Tubeless
21.00-35
Spec
37.25-35
TRA Code
or
Application
45/65-45
37.25-35
Tubeless
Ply
Rating
50/65-51
35"
21.00-35
Tubeless
Pattern
65/65-57
Tire Size
BIAS TIRE 75
TRA Code
or
Application

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
Pattern
76
Size
1138
44.8
316
12.4
507
20.0
348
13.7
24.0
378
14.9
8.50V
20
Industrial
Service
1275
50.2
321
12.6
606
23.9
339
13.3
55.0
391
15.4
8.50V
14.00-24
RL
24
28
Industrial
Service
1366
53.8
387
15.2
627
24.7
400
15.7
28.0
450
17.7
10.00W
14.00-24 TG
Tubeless
RL
24
Industrial
Service
1360
53.5
395
15.6
614
24.2
410
16.1
28.0
450
17.7
10.00VA
11.25/2.0
Industrial
Service
1495
58.9
445
17.5
671
26.4
459
18.1
33.5
513
20.2
RLS
28
32
Industrial
Service
1548
60.9
438
17.2
722
28.4
460
18.1
57.0
513
20.2
YS2
32
Industrial
Service
1465
57.7
430
16.9
658
25.9
472
18.6
49.2
513
20.2
16.00-25
RL
28
Industrial
Service
1495
58.9
445
17.5
671
26.4
459
18.1
33.5
513
20.2
18.00-25
Tubeless
RL
40
Industrial
Service
1608
63.3
508
20.0
727
28.6
572
22.5
36.0
587
23.1
ELS2
40
Industrial
Service
1685
66.3
515
20.3
796
31.3
530
20.9
66.5
587
23.1
STMS
40
Industrial
Service
1675
65.9
520
20.5
762
30.0
550
21.7
84.0
587
23.1
RL
40
Industrial
Service
1750
68.9
570
22.4
775
30.5
620
24.4
41.0
ELS2
36
Industrial
Service
1878
73.9
515
20.3
887
34.9
533
21.0
66.5
Creep
Creep
5
3
10
5
15
9
20
12
25
15
30
19
IDU
20
Load
Wheel
Steering
Wheel
1000
145
1000
145
kg
lbs
kg
lbs
11880
26200
9505
20960
10560
23290
8450
18630
9570
21100
7655
16880
8910
19650
7130
15720
8580
18920
6865
15135
8380
18480
6705
14785
8250
18190
6600
14550
8185
18050
6550
14440
IDU
20
IDU
24
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
1000
145
1000
145
1000
145
1000
145
1000
145
1000
145
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
kg
lbs
12420
27385
9935
21910
17100
37705
13680
30165
18000
39690
14400
31750
11040
24345
8830
19475
15200
33515
12160
26810
16000
35280
12800
28225
10005
22060
8005
17650
13775
30375
11020
24300
14500
31970
11600
25580
9315
20540
7450
16430
12825
28280
10260
22625
13500
29765
10800
23815
8970
19780
7175
15825
12350
27230
9880
21785
13000
28665
10400
22930
8765
19320
7010
15455
12065
26605
9650
21280
12700
28005
10160
22400
8625
19020
6900
15215
11875
26185
9500
20945
12500
27560
10000
22050
8555
18865
6845
15090
11780
25975
9425
20780
12400
27340
9920
21875
Load
Wheel
Steering
Wheel
Load
Wheel
Steering
Wheel
900
131
900
131
1000
145
1000
145
kg
lbs
kg
lbs
kg
lbs
kg
lbs
20700
45645
16560
36515
22500
49610
18000
39690
18400
40570
14720
32455
20000
44100
16000
35280
16675
36770
13340
29415
18125
39965
14500
31970
15525
34230
12420
27385
16875
37210
13500
29765
14950
32965
11960
26370
16250
35830
13000
28665
14605
32205
11685
25765
15875
35005
12700
28005
14375
31695
11500
25355
15625
34455
12500
27560
14260
31445
11410
25155
15500
34175
12400
27340
28
25"
RL
RLS
YS2
0
Static
IDU
28
32
13.00/2.5
RL
ELS2
STMS
IDU
40
Load
Wheel
Steering
Wheel
1000
145
1000
145
kg
lbs
kg
lbs
30600
67475
24480
53980
27200
59975
21760
47980
24650
54355
19720
43480
22950
50605
18360
40485
22100
48730
17680
38985
21590
47605
17270
38085
21250
46855
17000
37485
21080
46480
16865
37185
668
26.3
15.00/3.0
RL
IDU
40
Load
Wheel
Steering
Wheel
1000
145
1000
145
kg
lbs
kg
lbs
36385
80230
29110
64185
32345
71320
25875
57055
29310
64630
23450
51705
27290
60170
21830
48135
26280
57950
21025
46360
25670
56610
20535
45290
25270
55720
20215
44575
25065
55270
20050
44215
21.00-25
28
32
RL
km/h
mph
587
23.1
13.00/2.5
IDU
36
Load
Wheel
Steering
Wheel
1000
145
1000
145
kg
lbs
kg
lbs
33300
73425
26640
58740
29600
65270
23680
52215
26825
59150
21460
47320
24975
55070
19980
44055
24050
53030
19240
42425
23495
51805
18795
41445
23125
50990
18500
40790
22940
50580
18350
40465
18.00-33
RL
24"
STMS
kPa
psi
12.00-20
Industrial
Service
12.00-24
20
STMS
33"
18.00-33
Tubeless
Industrial Service
20"
24"
12.00-24
21.00-25
Tubeless
Inflation
Pressure
inch
RL
25"
16.00-25
Tubeless
Ply
Rating
Appli.
14.00-24
Industrial Service
20"
12.00-20
RL
Ply
Rating
16.00-25
Pattern
33"
ELS2
18.00-25
Tire Size
BIAS TIRE 77
35"
21.00-35
Tubeless
Pattern
Ply
Rating
TRA Code
or
Application

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
15.00/3.0
Pattern
Ply
Rating
Appli.
Inflation
Pressure
Size
inch
35"
RL
40
Industrial
Service
2000
78.7
575
22.6
937
36.9
648
25.5
41.0
701
27.6
ELS2
40
Industrial
Service
2040
80.3
592
23.3
955
37.6
617
24.3
67.0
701
27.6
RL
ELS2
IDU
40
Load
Wheel
Steering
Wheel
kPa
psi
km/h
mph
0
Static
Creep
Creep
5
3
10
5
15
9
20
12
25
15
30
19
1000
145
1000
145
kg
lbs
kg
lbs
43740
96445
34990
77155
38880
85730
31105
68585
35235
77695
28190
62155
32805
72335
26245
57870
31590
69655
25270
55725
30860
68050
24690
54440
30375
66975
24300
53580
30130
66440
24105
53150
21.00-35
Tire Size
Off-the-Road Tires Used for Industrial Vehicle Applications

1) Industrial Vehicles comprise vehicles such as counter-balanced lift trucks, container handlers, straddle carriers, aircraft tow tractors, mobile crushers, log
stackers etc., used on hard improved surfaces, smooth floors and runways.
2) Use Specifications of Industrial Service only.
3) Consult a Rim Manufacturer when inflation pressure exceeds 800kPa (116psi).
4) For Speeds exceeding 30km/h (18mph), consult a Bridgestone Representative.
5) For tire sizes and star ratings other than listed above, consult a Bridgestone Representative.
6) For RTG (Rubber Tired Gantry Crane) operation, consult a Bridgestone Representative.
Sand Service
20"
14.00-20
Pattern
Ply
Rating
TRA Code
or
Application

OD
OW
SLR
SLW
mm
mm
mm
mm
inch
inch
inch
inch
OTD
mm
Minimum
Dual Spacing
mm
inch
Recommended
Rim/Flange Height
Pattern
Sand Service
20"
SCP2
18
E7
1206
47.5
370
14.6
TBA
TBA
TBA
TBA
10.5
Max.
Speed
Tire Load Limits at Various Cold Inflation Pressures (100kPa = 1bar)
Size
inch
When
tires are to be used under conditions other than those recommended above, consult a Bridgestone Representative.
9.00V
SCP2
78
Appli.
Sand
10km/h
5mph
50km/h
30mph
65km/h
40mph
kPa
psi
70
10
100
15
140
20
170
25
210
30
240
35
kg
lbs
kg
lbs
kg
lbs
1960
4320
1340
2950
1135
2500
2485
5480
1695
3740
1435
3160
2950
6500
2015
4440
1695
3740
3355
7400
2285
5040
1940
4280
3720
8200
2550
5620
2160
4760
4080
9000
2790
6150
2360
5200
14.00-20
Tire Size
BIAS TIRE 79

1.2 The Variation in Load Carrying Capacity with Operating Speed
1. Remarks
For Radial Tires
Both rules of 1.1 and 1.2 cant be applied at the same time.
Maximum Speed
(km/h)
1.1 Excess Load

Due to the specialized nature of Off-The-Road vehicle usage, loads in excess of those in the appropriate above-listed
load tables are often encountered.
These excess loads result from items such as actual vehicle weight exceeding the design weight, varying density of
materials, field modifications to the equipment, load transfer, etc.
Only under these conditions, the actual tire load in service may exceed the above load ratings for the tire(*) by an
amount not greater than shown in the following table:
For Radial Tires

E2, E3, E4*
L**
Maximum Excess Load
7%
7%
Maximum Excess Pressure
14%
14%
800kPa
825kPa
116psi
120psi
Maximum Pressure
(except for underground vehicles)
When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads.
For each 1% increase in load, the inflation pressure must be increased by 2%.
*except following sizes on the list
11.00R20
12.00R20
335/80R20
365/80R20
405/70R20
12R22.5
Static
Creep
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
80<
E2, E3
E4
*
+12%
+10%
+8%
+6%
+4%
+3%
+2%
0
-2%
-6%
-12%
-20%*
-30%*
-42%*
*
0
-9%
-18%
-27%
L**
+60%
+30%
+14%
0
-13%
-20%
-26%
-30%
Reference speed for calculating load variance

* Consult a Bridgestone Representative
** About the size of 55.5/80R57 and 60/80R57,
consult a Bridgestone representative.
*
*
*
*
12.00R24
This table doesn't secure to prevent the risk derived from heat buildup.
About 63" tires, consult a Bridgestone represetative.

**except 55.5/80R57 and 60/80R57
For Bias Tires

The maximum excess loads will result in reduced tire performance.
For Bias Tires

L**
E2, E3, E4*
Maximum Excess Load
15%
15%
L5/L5S***
0%
Maximum Excess Pressure
30%
825kPa
120psi
30%
+100kPa
Maximum Pressure
825kPa
120psi
(except for underground vehicles)
When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads.
For each 1% increase in load, the inflation pressure must be increased by 2%.
*except following sizes on the list
9.00-20
10.00-20
11.00-20
**except following sizes on the list

5.70-12
23x8.50-12
27x8.50-15
33x12.5-15
12.5/70-16
10-16.5
12-16.5
12.5/65-18
15.5/60-18
15.5/70-18
42x17-20
17.5/65-20
16.9-24
18.4-24
***For L5/L5S tires following sizes on the list, on front tires for front end loaders, it is permissible to increase inflation
pressure up to 100kPa (15psi) above, with no increase in load.
(Maximum inflation pressure should not exceed 825 kPa (120psi).)
17.5-25
20.5-25
23.5-25
26.5-25
29.5-25
29.5-29
35/65-33
40/65-39
45/65-45
50/65-51
65/65-57
Maximum Speed
(km/h)
Static
Creep
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
80<
E2, E3, E4**
*
+12%
+10%
+8%
+6%
+4%
+3%
+2%
0
*
*
*
*
*
*
*
**except following sizes on the list
0
-9%
-18%
-27%
L***
+60%
+30%
+14%
0
-13%
-20%
-26%
-30%
*
9.00-20
10.00-20
Reference speed for calculating load variance

Consult a Bridgestone Representative
11.00-20
***except following sizes on the list

5.70-12
23x8.50-12
27x8.50-15
33x12.5-15
12.5/70-16
10-16.5
12-16.5
12.5/65-18
15.5/60-18
15.5/70-18
42x17-20
17.5/65-20
16.9-24
18.4-24
This table doesn't secure to prevent the risk derived from heat buildup.
The maximum excess loads will result in reduced tire performance.
80
REMARKS & SPECIAL OPERATIONS 81
2. Special Operations
2.1.1 For Front End Loader Service
Please check your operation to make sure of the Tire Load Limit.
For Radial Tires
Type/Service
Type of Operations
Reference No.
Standard
Earthmover
Underground Shuttle Truck Service
2.1.3
When the vehicle is driven over the highway for delivery, or moved by an
operator to a new job site - Drive-Away
Distance of picking up and relocating material
Less than 76m (one way) - Standard
Loader & Dozer
Tread
Class
Inflation Pressure
Rim Diameter
29" and below
Conventional size
(95 series)
1
2.2.1
L2, L3
L4
L5
Load Capacity*
10km/h (5mph)
Wide base size

(65 series)
Wide base size

(85, 65 series)
1
33" and above
1800
550kpa 825kpa 500kpa
(80psi) (120psi) (73psi)
650kpa
(94psi)
2.1.1
Underground Load Haul Dump Service
2.1.2
Underground Shuttle Truck Service
2.1.3
When the vehicle is driven over the highway for delivery, or moved by an
operator to a new job site - Drive-Away
2.2.2
2.1 For Load-and-Carry Operations

Service conditions of a loader is defined as picking up material and relocating a short distance away, a maximum of
76m (250 feet), one way, with a maximum speed of 10km/h (5 mph). However, a loader can pick up a load and
transport such load to another location and return unloaded for a longer distance. This type of service is called as
Load-and-Carry operations. Transportation usually occurs at low speeds, up to 25km/h (15 mph), and distances are
limited.
The tires when used in Load-and-Carry operations may encounter heat problems especially on the front axle tires. To
avoid such problems, Bridgestone recommends the following operating conditions.
For tires over 33" inch rim diameter tires, careful study is required to maximize tire life while considering TonKilometer-Per-Hour limits. Please consult a Bridgestone representative for more information.
If you need to use the tire beyond this recommendation, please consult a Bridgestone representative.
Allowable Average
Work-shift Speed
(km/h)
600kpa 750kpa
(87psi) (109psi)
100% of
STD. load
L5S
Distance of picking up and relocating material

More than 76m (one way) - Load-and-Carry Operations
Maximum Cycle
Distance
(m)
1500 (VSDT)
1200 (VSDL, VSDR)
1200
16
14
10
6
5
*STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
Please refer to the load - inflation pressure table for loader and dozer service 10km/h (5mph) service .
For Bias Tires

Tread
Class
Inflation Pressure
for Front Tires
L2, L3
L4
L5
L5S
Standard inflation
pressure
+
100kpa (15psi)
Load Capacity*
10km/h (5mph)
Maximum Cycle
Distance
(m)
Allowable Average
Work-shift Speed
(km/h)
85% of
STD. load
1200
500
10
**
300
Rim Diameter
29" and below
32" and above
90% of
STD. load
* STD.load: Maximum permissible load at standard inflation pressure for respective tire size and star rating.
Please refer to the load - inflation pressure table for loader and dozer service 10km/h (5mph) service.
** Not permissible
The inflation pressure should not exceed 825kPa (120psi).
2.1.2 For Load Haul Dump Service

Since a load haul dump (LHD) unit has a similar structure and operational characteristics
as load and carry service on a front end loader, the following operating parameters are
recommended.
For Radial Tires

Inflation Pressure
Conventional size
Wide base size
(95 series)
(85, 65 series)
Tread
Class
Earthmover
Articulated Dump Truck
Earthmover & Loader

Shuttle Truck
Front End Loader
under ground
High
Standard
Speed
Load
825kpa
(120psi)
L5
650kpa
(94psi)
100% of
STD. load
L5S
Low
Maximum Cycle
Distance (m)
Allowable Average
Work-shift Speed (km/h)
1800
1500 (VSDT)
1200 (VSDL, VSDR)
1200
14
10
6
5
2 D2A
**
L2, L3
L4
Loader
LHD
Load Capacity*
10km/h (5mph)
*See note in Table 2.1.1.

**Not permissible
100% of STD. load is applicable to the following sizes on the list.
29.5R29 2, 35/65R33 2
Severe
For Bias Tires

Tread
Class
Inflation Pressure
for Front Tires
L2, L3
L4
L5
L5S
Standard inflation
pressure
+
100kpa (15psi)
Load Capacity*
10km/h (5mph)
Rim Diameter
29" and below
32" and above
**
90% of
STD. load
85% of
STD. load
Maximum Cycle
Distance
(m)
Allowable Average
Work-shift Speed
(km/h)
500
300
*See note in Table 2.1.1.

**Not permissible
The inflation pressure must meet 1.1 for maximum excess load.
82
2.1.3 For Shuttle Truck Service

Shuttle truck service is defined as small and low vehicle height dump truck used in underground mines. However, the
application is considered to be similar to load and carry operation which has relatively slower speed and shorter
distance with more load than normal dump truck use.
Consequently, the severity to the tire is estimated using the load and carry concept.
Bridgestone defines the recommendation in this section.
b. Stop for a 30-minute cooling period after each 80 km (50 miles) of driving or before 2 hours of continual
operation, whichever comes first. (shown in the following figure)
c. One-hour minimum midday lunch stop should be observed during full day operations. (shown in the following
figure)
Drive-Away
STOP
0.5 hr.
For Radial Tires

Speed
Tread Class
&
Pattern
L4
Wide base size
(85, 65 series)
25" 33"
L5
L5S
Conventional size
(95 series)
25" 35"
E4
VSNT
VSDT
VSDL
VSMS
VELS
VMTP
VRLS
Inflation Pressure
Load Capacity*
10km/h (5mph)
2 D2A
650 kpa
(94psi)
100% of
STD. load
2 E2A
700 kpa
(102psi)
115% of
STD. load
Maximum Speed
(km/h)
Allowable Average
Work-shift
Speed (km/h)
25
14
10
6
5
30
14
2 Hrs. or 80 km
(50 miles)
For Bias Tires
45/65R45
VSDL
30.3
50/65R51
VSDL
40.3
555/80R57
VSDL
64.8
60/80R57
VSDL
69.5
65/65-57
DL
64.8
(1) Recommendations for Off-the-Road Tires

Because of the special extra-heavy construction of Off-the-Road tires, special precautions must be observed to
protect these expensive tires when the vehicle is driven over the highway for delivery, or moved by an operator to
a new job site.
If the precautions are not observed, excessive tire heat is built up and the tires most likely will fail prematurely.
These precautions are as follows and apply to tires on all vehicles in transitdriven or towed. Consult a
Bridgestone Representative for specific information before starting out on a drive-away trip.
(2) Load and Pressure

[1] Vehicles must be empty during transportation.
[2] Inflation pressure is to be checked before starting, each break and adjusted to the pressure recommended for
over-the-highway transit by Bridgestone.
[3] Inflation pressures are not to be reduced by bleeding tires during transportation.
[4] Periodical inflation pressure checks during transportation (i.e. every 2 hours) is recommended. Although
operational pressure build-up in tires is normal during transportation, when it increases 20% or more than the
cold pressure reading, it indicates over heating, and the vehicle should be stopped and a Bridgestone
Representative should be consulted.
2 Hrs. or 80 km
(50 miles)
During or after the operation, please wait for the following hours prior to start Drive-Away.
Size & Pattern
2.2.1 Off-the-Road Tires for Earthmover
2 Hrs. or 80 km
(50 miles)
2.2.2 Off-the-Road Tires for Loader & Dozer

Load
per
tire
[ton]
2.2 Drive-Away Tires on Vehicles
STOP
0.5 hr.
[2] Vehicles in transit should be accompanied by responsible personnel in a pilot car to enforce these precautions
and maintain a check on equipment. This is good insurance for a valuable investment.
*See note in 2.1.1.

For over Maximum Speed, consult a Bridgestone Representative.
29.5R29 2, 35/65R33 2
100% of STD. load is applicable to the following sizes on the list.
Not recommendable.
STOP
0.5 hr.
Maximum Travel Distance (One way)
Rest time prior to traveling (Hour)
5 km or
3.1 Mil
10 km or
6.2 Mil
Maximum speed on traveling

1.5
10
11
20
23
3.5
10 km/h or 6.2 MPH

7
20 km/h or 12.4 MPH

1

60 km or
37 Mil
20 km/h or 12.4 MPH

50 km or
31 Mil
10 km/h or 6.2 MPH

20 km or
12.4 Mil
10
14
10 km/h or 6.2 MPH

4
11
10 km/h or 6.2 MPH

3
6.5
20 km/h or 12.4 MPH
10
10 km/h or 6.2 MPH
*Please consult a Bridgestone representative.

Remarks;
1. Time for cooling temperature of the tire (Parked up the loader) should be applied prior to start to travel on the road.
2. Ambient temperature of 38C or 100F is assumed.
3. Maximum load on tire should be less than the Load per tire in the above table.
4. Air pressure for Drive-Away should be the same as our recommended figures, and need to confirm whether it would not be higher figures that we
experienced prior to travel.
5. We recommend that it would be best way for Giant loaders to use tow hauler for long way traveling. The drive away distance should be shorter
than 60km (37 miles) within 20 km/h as the maximum speed to minimize the risk of tire heat damage.
6. If you have a plan of Drive-Away, please consult a Bridgestone representative.
(3)Speed
[1] Regular tread tires (E-3):
(Note: For deep tread tires (E-4), always consult a Bridgestone Representative.)
a. Maximum highway speed:
Maximum Speed (Drive-Away)

Maximum Speed
Radial / Bias
84
Regular
50 km/h
30 mph
Wide Base
32 km/h
20 mph
OTHER SPECIFICATION
1. O-Ring Specifications
Code
No.
Applicable Size
Radial
13.00R24 TG
14.00R24 TG
16.00R24 TG
P-25AX 14.00R25*
15.5R25
17.5R25
20.5R25
29.5R25
385/95R25
445/80R25
445/95R25
14.00R25**
P-25B
16.00R25
17.5R25
18.00R25
20.5R25
21.00R25
23.5R25
26.5R25
29.5R25
30/65R25(750/65R25)
385/95R25
445/80R25
445/95R25
505/95R25
525/80R25
550/65R25
600/65R25
650/65R25
750/65R25
29.5R29
P-29B
33.25R29
775/65R29
875/65R29
P-24A
Diameter
3. Rim and Valve

Inner
Circumference
inch
Code
No.
Bias
mm
inch
mm
13.00-24 TG
14.00-24 TG
15.5-25
17.5-25
20.5-25
16.00-25
17.5-25
18.00-25
20.5-25
21.00-25
23.5-25
26.5-25
29.5-25
29.5-29
-
6.6
0.26
1768 69.61
P-33B
6.8
0.27
1779 70.04
P-35B
P-39B
9.8
0.39
1779 70.04
P-45B
P-49B
P-51C
P-57C
P-63C
9.8
0.39
2127 83.74
Applicable Size
Radial
18.00R33
21.00R33
35/65R33
21.00R35
24.00R35
29.5R35
33.25R35
37.25R35
37.5R39
40.5/75R39
45/65R39
45/65R45
24.00R49
27.00R49
31/90R49
30.00R51
33.00R51
36.00R51
50/65R51
37.00R57
40.00R57
42/90R57
46/90R57
50/90R57
55.5/80R57
60/80R57
53/80R63
59/80R63
Diameter
Inner
Circumference
Bias
mm
inch
mm
inch
18.00-33
35/65-33
21.00-35
37.25-35
40/65-39
41.25/70-39
45/65-45
50/65-51
65/65-57
-
9.8
0.39
2382
93.78
9.8
0.39
2572 101.26
9.8
0.39
2900 114.17
9.8
9.8
0.39
0.39
3326 130.94
3611 142.17
12.7
0.5
3694 145.43
12.7
0.5
4129 162.56
Rim Width
Rim Flange
12.7
0.5
4580 180.31
Rim Flange
Lock Ring
2. Flap Specifications
Flap
550/600-15
650/700/750-15
12/65B-15
750/825AR15
750/825-R16
200D1000-R15
700A825-R20
900A111-R20
1100B13/80-R20
1400/14/80R20
1300A1600-20
42x17-20
14/70-20
1300-24
1200A1400-24,25
1100B1300-R24
1300/1400-24,25
1400/1600R24,25
1600-24,25
155A1800-24,25
235-25
265-25
2100R33
86
Bead-Seat Band
Rim Base
* For Rim Size 10.00-25

** For Rim Size 11.25-25
Locking Key
(part of lock ring)
Bead Seat
DB
G1
mm
inch
mm
inch
mm
inch
1175
1177
1196
1201
1255
1201
1255
1201
1594
1594
1618
1576
1587
1916
1942
1922
1942
1942
1916
1926
1934
2010
2553
46.3
46.3
47.1
47.3
49.4
47.3
49.4
47.3
62.8
62.8
63.7
62.1
62.5
75.4
76.5
75.7
76.5
76.5
75.4
75.8
76.1
79.1
100.5
4.0
4.5
7.0
6.0
5.0
6.5
5.0
6.0
6.5
8.5
8.0
9.0
9.0
9.0
9.0
7.5
9.0
9.0
9.0
6.0
9.0
12.0
9.0
0.16
0.18
0.28
0.24
0.20
0.26
0.20
0.24
0.26
0.33
0.31
0.35
0.35
0.35
0.35
0.30
0.35
0.35
0.35
0.24
0.35
0.47
0.35
129
169
270
184
174
205
180
205
218
240
246
390
331
229
232
220
232
260
293
340
560
570
413
5.1
6.7
10.6
7.2
6.9
8.1
7.1
8.1
8.6
9.4
9.7
15.4
13.0
9.0
9.1
8.7
9.1
10.2
11.5
13.4
22.1
22.4
16.3
Nominal
Diameter
Valve-Stem
Support
Valve Hole
O-Ring
8.50V
P
G1
24
DB
Nominal Diameter of Rim (inches)

Flange Type
Rim Width (inches)
Flap
OTHER SPECIFICATION 87
3.1 Rim Designation

Full Tapered Bead Seat Rims (5 pieces)
A
11.00/1.5
11.25/2.0
13.00/2.5
15.00/3.0
17.00/2.0
17.00/3.5
19.50/2.5
19.50/4.0
22.00/3.0
22.00/4.5
24.00/3.0
24.00/3.5
24.00/5.0
25.00/3.5
26.00/5.0
27.00/3.5
27.00/6.0
28.00/3.5
29.00/6.0
31.00/4.0
32.00/4.0
32.00/4.5
32.00/6.5
34.00/6.5
36.00/4.5
36.00/5.0
40.00/4.5
41.00/5.0
44.00/5.0
44.00/6.0
47.00/6.0
52.00/6.0
88
Tire Size
Radial
14.5R15
16.00R25
445/95R25
18.00R25
505/95R25
18.00R33
21.00R25
21.00R33
21.00R35
550/65R25
600/65R25
24.00R35
24.00R49
23.5R25
600/65R25
650/65R25
27.00R49
31/90R49
750/65R25(30/65R25)
26.5R25
30.00R51
750/65R25(30/65R25)
775/65R29
33.00R51
29.5R25
775/65R29
29.5R29
29.5R35
36.00R51
875/65R29
33.25R29
33.25R35
37.00R57
42/90R57
875/65R29
35/65R33
40.00R57
46/90R57
37.25R35
37.5R39
40.5/75R39
45/65R39
50/90R57
50/90R57
45/65R39
45/65R45
53/80R63
50/65R51
59/80R63
59/80R63
55.5/80R57
60/80R57
-
Bias
16.00-25
18.00-25
18.00-33
21.00-25
21.00-35
24.00-35
23.5-25
26.5-25
29.5-25
29.5-29
35/65-33
37.25-35
40/65-39
41.25/70-39
45/65-45
50/65-51
65/65-57
Flat Base Rims
Recommended Rim/
Flange Height
Semi Drop Center Rims (SDC)
Full Tapered Bead Seat Rims (3 pieces)
Tire Size
Recommended Rim/
Flange Height
Radial
10.00/1.5
14.00R25
385/95R25
15.5R25
12.00/1.3
17.5R25
14.00/1.5
445/80R25
550/65R25
550/65R25
17.00/2.0
17.00AL/1.7(1only) 20.5R25
17.00/1.7
600/65R25
20.5R25
17.00/2.0
525/80R25
Bias
14.00-25
15.5-25
17.5-25
20.5-25
20.5-25
-
Recommended Rim/
Flange Height
Tire Size
Radial
13.00R24 TG
14.00R24 TG
16.00R24 TG
335/80R20
365/80R20
405/70R20
-
6.00GS
8.00TG
10.00F
10.00VA
11x20
11.00TG
13x20
14.00TG
Bias
6.50T
7.50-15
7.50-16
14.00-24 TG
33x12.5-15
13.00-24 TG
14.00-24 TG
16.00-24 TG
14/70-20
42x17-20
7.00T
7.50V
8.00V
8.5
8.50V
9.00
9.00V
10.00WI
10.00W
Drop Center Rims (DC, W, DW)

C
11LB
6LB
8LB
10LB
8.25
9.75
W13
W14L
W15L
DW20B
DW27B
Radial
8.25R15
9.00R20
10.00R15
11.00R20
12.00R20
12.00R24
12R22.5
14.00R20
16.00R20
14.00R24
385/95R24
385/95R25
Bias
8.25-20
9.00-20
10.00-20
14.00-20
11.00-20
12.00-24
12.00-20
12.00-24
14.00-24
14.00-24
-
Tire Size
Recommended Rim/
Flange Height
5JA
4.50E
5.1/2K
5.50F
7JA
Tire Size
Recommended Rim/
Flange Height
Radial
-
Bias
23x8.50-12
5.50-15
9.00-15
9.00-15
23x8.50-12
27x8.50-15
9.5/65-15
14.0/65-15
7.50-16
10.5/80-16
12.5/70-16
10-16.5
12-16.5
15.5/70-18
17.5/65-20
16.9-24
18.4-24
23.1-26
30.5L-32
Interchangeable Swivel Valves For Tubeless Or Tube Type Tires
3.2 Valve Types
Large Bore Valves
TRJ4000-4 1/2
Tube Valve and

Rim Section
Dimensions (mm)
F
A
B
TRJ650
27.5 79.5 80
TRJ4000-4 1/2 31
114.0 90
TRJ4000-8
31
203.0 90
TRJ4000-7 1/2 31
190.5 90
Valve No.
F
Tube
Flap
A
This type of VALVE consists of a combination of the rubber base SP-4000 or

SP-2.
Tube Type Spud
Tubeless Type Spud
SP4000
SP2
28mm
Tube Valve
Tubeless Valve and

Rim Section
9.5mm
Inner Liner
114mm
Tube Type Rubber Base Valves

TR218
B
Rim Valve
Valve No.
9.5mm
Dimensions (mm)
A
TR218A
20.6
11.1
TR220A
30.2
20.7
Tube Valve
63.5mm
PV-7
86
Tubeless Valve
Valve No.
PV-7
Dimensions (mm)
A
D dia.
73
100
90
D dia.
90
Tube Type Rubber Covered Valves

JS75
Dimensions (mm)
F
A
B
Valve No.
B
JS75
TR76A
TR77A
TR77E
TR78A
TR175A
TR177A
JS177B
JS179
JS179A
TR179A
PV38
PV89
V3-02-3
V3-02-15
F 2
A
95mm
24
70
24
86
24
105
35
94
24
127
24
115
24
95
28
91
36
133
29
137
24
141
24
136
42.8
123
35.8 44.5
23.3 145.5
TR13
E
82
86
86
86
86
86
86
86
86
86
86
80
86
85
86
38mm
Valve No.
Dimensions (mm)
E
11.5
16.5
TR13
TR15
56mm
Tube Type Screw-on Valves

PV88
B
D
G
JSJ1175
90
B
A
F 2
Large Bore Valves
Valve No.
JSJ1078S
JSJ1175
JSJ1175B
JSJ1175C
Dimensions (mm)
A
B D dia. F
30
35
35
35
121
105
105
102
32
32
32
32
Valve No.
84
88
80
60
D dia.
V3-06-2
V3-06-5
PV88
PV118
95mm
TR150CW
Dimensions (mm)
B
C
D
F
23.3 44.5
23.3 62.5
26.3 80.5
35.4 130.0
20.8
25.9
47.0
84.0
37.5
49.0
54.5
55
41
30
10
G
55
41
30
15.5mm
JS2
F
88.5mm
A
Valve No.
JS2
Valves, TR150 and TR150CW, are also

called Hand Bendable Valves, that is, their
stems are made of very flexible material
permitting manual bending in all directions
and to any angle.
Dimensions (mm)
F
A
B
26
33
70
57mm
92
OTHER INFORMATION
1. Unit Conversion Tables
TEMPERATURE
INFLATION PRESSURE
2
kg/cm
psi
kPa
bar
kg/cm
psi
kPa
bar
kg/cm
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
1
3
4
6
7
9
10
11
13
14
16
17
18
20
21
23
24
26
27
28
30
31
33
34
36
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.0
37
38
40
41
43
44
45
47
48
50
51
53
54
55
57
58
60
61
62
64
65
67
68
70
71
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
psi
72
74
75
77
78
80
81
82
84
85
87
88
89
91
92
94
95
97
98
99
101
102
104
105
107
kPa
bar
kg/cm
490
500
510
520
530
540
550
560
570
580
590
600
610
620
630
640
650
660
670
680
690
700
710
720
730
4.9
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.6
7.7
7.8
7.9
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10.0
psi
108
109
111
112
114
115
116
118
119
121
122
124
125
126
128
129
131
132
133
135
136
138
139
141
142
kPa
bar
740
750
760
770
780
790
800
810
820
830
840
850
860
870
880
890
900
910
920
930
940
950
960
970
980
7.4
7.5
7.6
7.7
7.8
7.9
8.0
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
lb
kg
-19
-18
-17
-16
-15
-14
-13
-12
-11
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
1
2
3
4
5
6
7
8
9
10
WEIGHT
FROM POUND TO KILOGRAM
94
FROM KILOGRAM TO POUND
lb
kg
lb
kg
lb
kg
lb
kg
kg
lb
kg
lb
kg
1
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
220
240
0.5
4.5
9.1
13.6
18.1
22.7
27.2
31.8
36.3
40.8
45.4
49.9
54.4
59.0
63.5
68.0
72.6
77.1
81.6
86.2
90.7
99.8
108.9
260
280
300
320
340
360
380
400
420
440
460
480
500
520
540
560
580
600
700
800
900
1000
1100
117.9
120.0
136.1
145.2
154.2
163.3
172.4
181.4
190.5
199.6
208.7
217.7
226.8
235.9
244.9
254.0
263.1
272.2
317.5
362.9
408.2
453.6
499.0
1200
1300
1400
1500
1600
1700
1800
1900
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
544.3
589.7
635.0
680.4
725.8
771.1
816.5
861.8
907.2
997.9
1088.6
1179.4
1270.1
1360.8
1451.5
1542.2
1633.0
1723.7
1814.4
1905.1
1995.8
2086.6
2177.3
5000
5200
5400
5600
5800
6000
7000
8000
9000
10000
11000
12000
13000
14000
15000
16000
17000
18000
19000
20000
2268.0
2358.7
2449.4
2540.2
2630.9
2721.6
3175.2
3628.8
4082.4
4536.0
4989.6
5443.2
5896.8
6350.4
6804.0
7257.6
7711.2
8164.8
8618.4
9072.0
1
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
2.2
11.0
22.0
33.1
44.1
55.1
66.1
77.2
88.2
99.2
110.2
121.3
132.3
143.3
154.3
165.3
176.4
187.4
198.4
209.4
220.5
242.5
264.6
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
350
400
450
500
550
286.6
308.6
330.7
352.7
374.8
396.8
418.9
440.9
463.0
485.0
507.1
529.1
551.2
573.2
595.2
617.3
639.3
661.4
771.6
881.8
992.1
1102.3
1212.5
600
650
700
750
800
850
900
950
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
1322.8 2500
1433.0 2600
1543.2 2700
1653.5 2800
1763.7 2900
1873.9 3000
1984.1 3500
2094.4 4000
2204.6 4500
2425.1 5000
2645.5 5500
2866.0 6000
3086.4 6500
3306.9 7000
3527.4 7500
3747.8 8000
3968.3 8500
4188.7 9000
4409.2 9500
4629.7 10000
4850.1
5070.6
5291.0
lb
5511.5
5732.0
5952.4
6173.0
6393.3
6613.8
7716.1
8818.4
9920.7
11023.0
12125.3
13227.6
14329.9
15432.2
16534.5
17636.8
18739.1
19841.4
20943.7
22046.0
-2.2
-0.4
1.4
3.2
5.0
6.8
8.6
10.4
12.2
14.0
15.8
17.6
19.4
21.2
23.0
24.8
26.6
28.4
30.2
32.0
33.8
35.6
37.4
39.2
41.0
42.8
44.6
46.4
48.2
50.0
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
51.8
53.6
55.4
57.2
59.0
60.8
62.6
64.4
66.2
68.0
69.8
71.6
73.4
75.2
77.0
78.8
80.6
82.4
84.2
86.0
87.8
89.6
91.4
93.2
95.0
96.8
98.6
100.4
102.2
104.0
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
105.8
107.6
109.4
111.2
113.0
114.8
116.6
118.4
120.2
122.0
123.8
125.6
127.4
129.2
131.0
132.8
134.6
136.4
138.2
140.0
141.8
143.6
145.4
147.2
149.0
150.8
152.6
154.4
156.2
158.0
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
159.8
161.6
163.4
165.2
167.0
168.8
170.6
172.4
174.2
176.0
177.8
179.6
181.4
183.2
185.0
186.8
188.6
190.4
192.2
194.0
195.8
197.6
199.4
201.2
203.0
204.8
206.6
208.4
210.2
212.0
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
213.8
215.6
217.4
219.2
221.0
222.8
224.6
226.4
228.2
230.0
231.8
233.6
235.4
237.2
239.0
240.8
242.6
244.4
246.2
248.0
249.8
251.6
253.4
255.2
257.0
258.8
260.6
262.4
264.2
266.0
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
160
170
180
190
200
267.8
269.6
271.4
273.2
275.0
276.8
278.6
280.4
282.2
284.0
285.8
287.6
289.4
291.2
293.0
294.8
296.6
298.4
300.2
302.0
320.0
338.0
356.0
374.0
392.0
TREAD DEPTH CONVERSION TABLE

FROM INCH TO MILIMETER
inch/32 mm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
0.8
1.6
2.4
3.2
4.0
4.8
5.6
6.4
7.1
8.0
8.7
9.5
10.3
11.1
11.9
12.7
13.5
14.3
15.1
15.9
inch/32 mm
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
16.7
17.5
18.3
19.1
19.8
20.6
21.4
22.2
23.0
23.8
24.6
25.4
26.2
27.0
27.8
28.6
29.4
30.2
31.0
31.8
FROM MILIMETER TO INCH
inch/32
mm
inch/32
mm
mm
inch/32
41
42
43
44
45
46
47
48
49
50
55
60
65
70
75
80
85
90
95
100
32.5
33.3
34.1
34.9
35.7
36.5
37.3
38.1
38.9
39.7
43.7
47.6
51.6
55.6
59.5
63.5
67.5
71.4
75.4
79.4
105
110
115
120
125
130
135
140
145
150
155
160
165
170
175
180
185
190
195
200
83.3
87.3
91.3
95.3
99.2
103.2
107.2
111.1
115.1
119.1
123.0
127.0
131.0
134.9
138.9
142.9
146.9
150.8
154.8
158.8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1.3
2.5
3.8
5.0
6.3
7.6
8.8
10.1
11.3
12.6
13.9
15.1
16.4
17.6
18.9
20.2
21.4
22.7
mm inch/32
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
23.9
25.2
26.5
27.7
29.0
30.2
31.5
32.8
34.0
35.3
36.5
37.8
39.1
40.3
41.6
42.8
44.1
45.4
mm
inch/32
mm
inch/32
37
38
39
40
41
42
43
44
45
46
47
48
49
50
55
60
65
70
46.6
47.9
49.1
50.4
51.7
52.1
54.2
55.4
56.7
58.0
59.2
60.5
61.7
63.0
69.3
75.6
81.9
88.2
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
95.5
100.8
107.1
113.4
119.7
126.0
132.3
138.6
144.9
151.2
157.5
163.8
170.1
176.4
182.7
189.0
OTHER INFORMATION 95
PRESSURE
2. Specific Weight (Approximately)
kg/cm2
kPa
bar
psi
kg/cm2
98.07
0.9807
14.22
kPa
bar
0.0102
0.01
0.1450
1.020
100
14.503
psi
0.0703
6.895
0.06895
Material
LENGTH
m.meter
c.meter
meter
k.meter
inch
foot
yard
mile
m.meter
c.meter
meter
k.meter
inch
foot
yard
0.10000
0.00100
0.03937
0.00328
0.00109
10.0000
0.01000
0.00001
0.39371
0.03281
0.01094
1000.00
100.00
0.00100
39.3707
3.28089
1.09363
0.00062
100000
1000.00
39370.7
3280.89
1093.63
0.62138
25.3995
2.53995
0.02540
0.00003
0.08333
0.02778
0.00002
304.794
30.4794
0.30479
0.00030
12.0000
0.33333
0.00019
914.383
91.4383
0.91438
0.00091
36.0000
3.00000
0.00057
160931
1609.31
1.60931
63360.0
5280.00
1760.00
hectare
k.meter2
foot2
yard2
acre
mile2
mile
Pounds/cu.yd
Metric Tons/m3
Anthracite
2000
1.2
Basalt
3400
2.0
Bauxite
2400
1.4
Clay: dry
2500
1.5
wet
2900
1.7
Coal
1200
0.7
Copper ore
2700
1.6
Crushed gypsum
2700
1.6
Earth: dry
2500
1.5
wet
2700
1.6
Granite
2900
1.7
Gravel: dry
2900
1.7
wet
3400
2.0
Note: Weight of materials varies with moisture content, grain
exact weight.
Material
Pounds/cu.yd
Metric Tons/m3
Iron ore: Magnetite

4700
2.8
Limestone
2500
1.5
Pyrites
4400
2.6
Over-Burden
75%rock-25%earth
3400
2.0
50%rock-50%earth
2900
1.7
25%rock-75%earth
2700
1.6
Sand: dry
2400
1.4
wet
3000
1.8
Sandstone
2500
1.5
Snow: dry
170
0.1
wet
840
0.5
Uranium
2700
1.6
size, degree of compaction, etc. Test must be made to know
AREA
meter2
are
meter
are
hectare
k.meter2
foot2
yard2
acre
mile2
0.010000
0.000100
0.000001
10.7639
1.19600
0.000247
0.000000
100.000
0.010000
0.000100
1076.39
119.600
0.024710
0.000039
10000.0
100.000
0.010000
107639.0
11960.0
2.47105
0.003861
10000.0
100.000
247.105
0.386098
0.092903
0.000929
0.000009
0.000000
0.111111
0.000023
0.000000
0.836130
0.008361
0.000084
0.000000
9.00000
0.000207
0.00000
4046.87
40.4687
0.404687
0.004047
43560.2
4840.00
0.001562
25900.2
259.002
2.59002
640.000
gram
k.gram
ton
s.ton
l.ton
ounce
pound
0.00100
0.03527
0.00220
1000.00
0.00100
0.00110
0.00098
35.2739
2.20462
1000.00
1.10230
0.98421
35273.9
2204.62
907185
907.185
0.90719
0.89286
32000.0
2000.00
1016.04
1.01604
1.12000
35840.0
2240.00
28.3495
0.02835
0.00003
0.00003
0.00003
0.06250
453.592
0.45359
0.00045
0.00050
0.00045
16.0000
cub.meter
liter
cub.inch
cub.foot
cub.yard
U.S.gallon
U.K.gallon
1000.00
61027.1
35.3147
1.30802
264.186
220.216
0.00100
61.0271
0.03532
0.00131
0.26419
0.22022
WEIGHT
gram
k.gram
ton
s.ton
l.ton
ounce
pound
CAPACITY
cub.meter
liter
cub.inch
cub.foot
cub.yard
U.S.gallon
U.K.gallon
0.00002
0.01639
0.00058
0.00002
0.00433
0.00361
0.02832
28.3167
1728.00
0.03704
7.48051
6.23549
0.76455
764.554
46656.0
27.0000
201.974
168.358
0.00379
3.78543
231.000
0.13368
0.00495
0.83270
0.00455
4.54596
277.413
0.16037
0.00594
1.20091
FORCE
1 kgf
9.81 N
POWER (horse power)
96
1 hp
550 ft * lbf/s
745.7 W
1 PS
75 m * kgf/s
735.5 W
OTHER INFORMATION 97
MEMO
DATA BOOK
Printed in Japan with vegetable oil ink on recycled paper

12ORA03E(Nov.12)

BS Databook 2013

Uploaded by

Copyright:

Available Formats

BS Databook 2013

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BS Databook 2013

Uploaded by

Copyright:

Available Formats

DATA BOOK

2013 Off-The-Road Tire Department, Bridgestone Corporation, Tokyo, Japan

2. Application Vehicle Matching Chart

REMARKS & SPECIAL OPERATIONS

Dump Trucks, Motor Scrapers, Articulated Dump Trucks,

Loader & Dozer Service

Front-End Loaders, Back-hoe Loaders, Skid Steer Loaders,

Mobile Crane Service

All-Terrain Cranes, High-Speed Vehicles, etc.

Straddle Carriers, Aircraft Towing Tractors, Container Stackers,

Compactor, Road Rollers

Sand Service Trucks

3. Rim and Valve ..................................................................................................... 87

Off-The-Road Radial Tire (ORR)

2.1 Tire Size

2.4 Overall Width (OW)

The size of each tire is indicated by nominal width and

2.5 Section Width (SW)

2.2 Star Rating, Ply Rating and

2.6 Static Loaded Radius and

The load capacity of a tire is indicated by the star

Static Loaded Radius is the shortest distance from the

2.3 Overall Diameter (OD)

2.7 Original Tread Depth (OTD)

Overall Width (OW)

Off-The-Road Bias Tire (ORS)

3.2 TRA Classification and Corresponding Bridgestone Off-The-Road

Main tire characteristics

Bridgestone Tread Pattern

E= Earthmover (Haulage Service)

VUT VKT VSB

Rigid dump trucks

Articulated dump trucks

Handling & Towing Equipments

Handling & Towing

Mobile Crane Service (High-Speed)

VGT VHB VHS VSW

RL RLS ELS2 STMS YS2

VUT VKT VSW

VUT VKT VSW

L=Loader & Dozer (Slow Speed Service)

Off road trucks

Extra Deep Tread

4.2 Type of Tire Structures Classified by Service and Designated by

Earthmover Service (E)

Grader Service (G)

Loader & Dozer Service (D)

Logging Service (S)

*Tire Aspect Ratio

Super Wide Base 40 / 65 - 39 30PR

Rim Diameter (inches)

Rim Diameter (inches)

NOTES: *Bias Tire Only

Steel Breaker Tire

4.1 Type of Tire Size Designation

Tire Structures Classified by Type of Service and Bridgestones

DOT code is necessary for USA public road.

5 Tire Size, Star Rating, Tubeless or Tube Type

Side steel breaker

Steel Breaker Bias Tire