Form

Product name

button is
pushedproduct
explanation

0.1010

0.0101

everyday check of an electric driver DI-9M-8

torque driver Etc.
DI-9M-8/08
A wide measurement range
DI-9M-08
With [ in OW joint ]
no rolling-back work

0.0208

2.0800

-IP05

2.0500

-IP5

0.0205

-IP50

0.2050

-IP200

2.0200

-IP500

2.0500

-IPS5/20

0.2020

03050

3.0200

3.0500

0.3025

-RL005

0.250

-RL05

2.0500

-RL2

0.202

-RL6

0.206

DIS-IP
Series

Torque tester

DI-1M-IP
Series

DI-4B-25

Torque checker

Measurement range

everyday check of an electric driver CD-100M

Etc.
It durability-improves also to the high CD-10M
torque which starts suddenly.

CD100M/10M

Torque meter

The example of a use, and the main

features

DIS-RL
Series

Management of various torque

wrench torque drivers
A small space is also Installation O.K.
with a dissociated type.
It is from low torque to high torque at
abundant variations.
A printable character is legible at 1.5
times of the former (ratio of our
company).

Management of an oil pulse tool etc. -IP50

It is highly precise and is a small light -IP200
weight. It installs in a work line and
an effect is demonstrated to the
scheduled inspection of a tool.The
-IP500
number of blows and a torque value
are expressed as a blow counter.
Everyday check of a small impact
tool air driver and a quantity
output electric driver
Blow counter built-in.
Measurement is possible, with a
socket attached.
the last check of a screw bolt Etc.
A detection part is very compact by
the separate type.
Power is demonstrated to narrow
torque measurement of a place, and
measurement of minute torque.

Digital torque driver

Digital torque wrench

Screw bundle counter

DID-05/4

DIW120/75/20
/15

ECT Series

Bolting of a screw bolt

Lightweight compact.
It forgets to shut, binds tight to
prevention and is with a number
counter.
By roller clutch adoption, it is a
working efficiency rise.

DID-05

2.0500

DID-4

0.0204

Bolting of a screw bolt

Lightweight compact.
By roller clutch adoption, it is a
working efficiency rise.

DIW-120

2.0120

DIW-75

0.2075

DIW-20

0.2020

DIW-15

0.2015

The bolting number check of a

ECT-02
screw
The signal from an electric driver is
counted. A check is easy with sound
and light.
It is a malfunction check by the timer ECT-03
function. There is also a type
corresponding to a work sensor and it
is.

It is used for torque measurement of

an electric driver.
Measurement is completed only by
OW Series the work of the direction of bolting.It
OKs with a bit attached.
Since it is not influenced of fricative,
management of the torque stabilized
Joint for measurement
for a long period of time is possible.
SJ Series

option

A former type coil spring compression

system.
With no worries about disassembly of
the adapter twisted for returning too
much with special structure.

It is used in order to maintain the

Proofreading accuracy of a measuring instrument.
apparatus There is also proofreading trust
service in our company.

A low price and a short

form

Work sensor
correspondence

OW-025

Max

0.25

OW-10

Max

OW-20

Max

OW-60

Max

SJ-50

Max

SJ-10

Max

1371

DID-4

Digital torque driver

Various functions Display section one apparatus
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one
by one like former.
Channel change

It is not necessary to change each setting.

The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
Peak, Real Time and Peak Down measuring mode (selectable)
800 data memory
Programmable High and Low set points with both audible beep and Green/Red LED indicator for
uniform torque tightening or GO/NO GO testing
Programmable screw tightening counter
Programmable Auto Zero function resets unit to zero for easy operation
Both CW and CCW operation
ASCII format output (USB)
Runs on internal NiMH batteries (for 12 hours) Auto shut-off after 10 min. of non-use

SUGISAKI METER CO.,LTD.

1371

Specification
Model Formula
Measuring range
Accuracy
Display
The measurement
direction
PP
TR
Measurement
Mode

PD
C

DID-4
0.0204 Nm 0.2040 kgfcm 0.2035 lbfin
0.5 (499 or less digit3digit)
The 4 figures digital display of LCD
CW-CCW (right and left)
peak to peak
track

The highest value of load is hold-displayed.

A display also changes with load change.

peak-down Load catches and displays the moment included in

descent from a rise.
Real-time Output Load torque value is outputted every about1/ 160
second.

A success or failure
judging function
The Maximum, minimum,
and the average value

High and low value are measurement within the limits, and can be set up.
Five-set preservation is possible.
The data number, the maximum, the minimum value, and the average value
of memory data are displayed.

Data memory counts

800 data

Data output

ASCII format (baud rate 19200)

auto clear time

If the set-up time comes, measurement value will be automatically cleared in

0.0~3.0 seconds (0.5s interval).

Setup of count
Power supply
Charge time / use time
Auto-power-off
Bit / Socket part
Weight
Accessories
(one piece each)
Option

1 to 99 count (count in a clockwise direction)

Ni-MH chargeable battery 1.2V4cells 800mAh
Charge about 3 hour /, continuation about 12-hour use
After the neglect during 10 minutes
HEX 6.35
400g
Bit #1+, #2+
Exclusive charger
Result of calibration document
Certification on calibration document / Traceability system figure
When outputting data, the cable(USB miniB) is needed.

Outside-dimension

m/m

Please check the newest information and the details

of each product in a homepage. URL http://www.cedar.co.jp

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.

SUGISAKI METER CO.,LTD.

1371

Digital torque driver

DID-05

2.0500.0 mNm

It is suitable for the torque check of the machine screw of M0.8-M2.0.

The check of the starting torque of solids of revolution, such as a
volume hinge, etc.
The main part was made into the light weight (about 180g) in order
to lessen influence of perpendicular power.
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one
by one like former.
Channel change

It is not necessary to change each setting.

The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
Peak, Real Time and Peak Down measuring mode (selectable)
800 data memory
Programmable High and Low set points with both audible beep and Green/Red LED indicator for
uniform torque tightening or GO/NO GO testing
Programmable screw tightening counter
Programmable Auto Zero function resets unit to zero for easy operation
Both CW and CCW operation
ASCII format output (USB)
Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use

SUGISAKI METER CO.,LTD.

1371

Specification
Model Formula
Measuring range
Accuracy
Display
The measurement
direction
PP
TR
Measurement
Mode

PD
C

DID-05
2.0500 mNm 0.0205 kgfcm
0.5 (499 or less digit3digit)
The 4 figures digital display of LCD

0.0204.5 lbfin

CW-CCW (right and left)

peak to peak
track

The highest value of load is hold-displayed.

A display also changes with load change.

peak-down Load catches and displays the moment included in

descent from a rise.
Real-time Output Load torque value is outputted every about1/ 160
second.

A success or failure
judging function
The Maximum, minimum,
and the average value
Data memory counts
Data output

High and low value are measurement within the limits, and can be set up.
Five-set preservation is possible.
The data number, the maximum, the minimum value, and the average value
of memory data are displayed.
800 data
ASCII format (baud rate 19200)

auto clear time

If the set-up time comes, measurement value will be automatically cleared in

0.0~3.0 seconds (0.5s interval).

Setup of count
Power supply
Charge time / use time
Auto-power-off
Bit / Socket part
Weight
Accessories
(one piece each)
Option

1 to 99 count (count in a clockwise direction)

Ni-Mn chargeable battery 650mAh
Charge about 3 hour /, continuation about 12-hour use
After the neglect during 10 minutes
4
180
4 Bit + #1For one-way1 For fixation1)
Exclusive charger
Result of calibration document
Certification on calibration document / Traceability system figure
When outputting data, the cable(USB miniB) is needed.

Outside-dimension

m/m

Please check the newest information and the details

of each product in a homepage. URL http://www.cedar.co.jp

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.
SUGISAKI METER CO.,LTD.

13X1

Management of electric screw driver

Torque Meter DI-9M-8/08
DI-9 series is most suitable for checking and controlling the torque of
Electric Screwdriver and Torque Driver.
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions
change. It is not necessary to reset up a maximum value
and a minimum value one by one like former.

The best for everyday check of an electric driver

Wide measurement range (0 - 8000digit)
Can measure without inversion Rolling-back work efficiently by OW joint (PAT.P).
Change of Measurement Unit Can be Performed
Data Output is USB Form (B Type).
Memory Data are 800 Affairs
Real-time Output is Every 1 / 180 Seconds.

SUGISAKI METER CO.,LTD.

13X1

Specification

Measuring range

DI-9M-8

DI-9M-08

0.0208.000 Nm

2.0800.0 mNm

0.2080.00 kgfcm

0.0208.000 kgfcm

0.2070 lbfin

0.0207.000 lbfin

0.5% (499 digit or less 3digit)

Accuracy

The 4 figures digital display of LCD

Display
The measurement direction

CW-CCW (right and left)

Zero return by one touch

Return to zero by pressing clear button.

Measurement

Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

Mode

High and low limits judging function

High and low value are measurement within the limits, and can be set up.
Load torque value is outputted every about1/ 180 second.

Real-time Output
The Maximum, the minimum, and the
average value display

The maximum, the minimum value, and average value of the saved data
ASCII format (baud rate 19200)

Data Output

10 minutes no use, automatically switch off.

Auto power save

Power supply

Ni-Cd chargeable battery 1.2V 5cells 700mAh

Charging time

About 3hours

Continuous working time

About 12hours
It is a display clearance in set-up time.

clearance

(0.1 - 3.0 sec)

20mm/ 9.5mm

Socket size

W:160D:125H:55 / About 1kg

Dimension / Weight

Measuring joint
OW-20/OW-60

Measuring joint
OW-025/OW-10

Cube (with 5 sides screw hole) 20x20x20

(M2.6/M3/M4/M5/M6 Tap processing)

Recommend buffer accessories

AC/DC adaptor
Exclusive receipt case
An inspection report, a proofreading certificate, a traceability system figure
Do not use for measurement of impact tool. Do not apply more than the specified torque.

MEASURING JOINT OW series

Since our company developed the buffer with little influence of
fricative, stable measurement could be performed.
Moreover ,it does not need to reverse-rotate at the time
of measurement, and work efficiency improved.

Please check the newest information and the details

of each product in a homepage. URL http://www.cedar.co.jp

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.
SUGISAKI METER CO.,LTD.

13X1

Management of the torque of each tool

Torque Meter

DI-11

Management of electric screw driver

To everyday management of the electric driver of high set torque etc.
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions
change. It is not necessary to reset up a maximum value
and a minimum value one by one like former.

Everyday check of an electric driver can be performed.

Since various information is displayed on a display board, it is very intelligible.
The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output

Every about 1 / 180 seconds

The taking-in software of data can download from a homepage.

SUGISAKI METER CO.,LTD.

13X1

Specification

DI-11
0.1020 Nm

Measuring range
(at the time of Track)

1.0200 kgfcm
1.0174 lbfin

Accuracy

0.5(499 or less digit3digit)

Display

The 4 figures digital display of LED

The measurement direction

Measuring mode

CW-CCW (right and left)

Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

High and low limits judging function

High and low value are measurement within the limits, and can be set up.
Five-set preservation is possible.

Real-time Output

Load torque value is outputted every about1/ 180 second.

The Maximum, the minimum, and the

average value display

The maximum, the minimum, average value,

Data Output

ASCII format (baud rate 19200)

Auto power save

10 minutes no use, automatically switch off.

Power supply

Ni-Cd chargeable battery 1.2V 5cells 700mAh

Charging time

From empty - less than 6hours

Continunous working time

12 hours

Weight

About 1.5kg

Outside dimension

130W180D34H

Attachment

Measurement joint

SJ-50 / SJ-100

AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)

Exclusive receipt case

Accessories(one piece each)

An inspection report, a proofreading certificate, traceability system figure

Measurement joint
SJ-50 (- 5 N-m)
There is no decomposition of the joint
depended for rewinding too much.
According to the model of driver,
wearing of various bits is possible.

SJ-100 (- 20 N-m)
For high torque tools (flat-spring
compression system)
The fit parts with a tool are six angles.
17mm of opposite neighborhoods

Please check the newest information and the details

of each product in a homepage. URL http://www.cedar.co.jp

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.
SUGISAKI METER CO.,LTD.

13X1

Management of electric screw driver

Torque Meter CD-100M/10M
Durability improves greatly (comparison of our company).
Everyday check of an electric driver is performed using SJ joint (PAT).
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions
change. It is not necessary to reset up a maximum value
and a minimum value one by one like former.

The best for everyday check of an electric driver

Everyday check of an electric driver can be performed.
Since various information is displayed on a display board, it is very intelligible.
The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output

Every about 1 / 180 seconds

The taking-in software of data can download from a homepage.

SUGISAKI METER CO.,LTD.

13X1

Specification

Measuring range

CD-100M

CD-10M

0.1010.00 Nm

0.0101.000 Nm

1.0100.0 kgfcm

0.1010.00 kgfcm

1.090 lbfin

0.109.000 lbfin

0.5% (199 digit or less 1digit)

Accuracy

The 3.5 figures digital display of LCD

Display
The measurement direction

CW-CCW (right and left)

Zero return by one touch

Return to zero by pressing clear button.

Measurement

Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

Mode

High and low value are measurement within the limits, and can be set up.

High and low limits judging function

Load torque value is outputted every about1/ 180 second.

Real-time Output
The Maximum, the minimum, and the
average value display

The maximum, the minimum, average value,

ASCII format (baud rate 19200)

Data Output

10 minutes no use, automatically switch off.

Auto power save

Power supply

Ni-Cd chargeable battery 1.2V 5cells 700mAh

Charging time

About 3hours

Continuous working time

About 12hours
It is a display clearance in set-up time.

clearance

(0.1 - 3.0 sec)

20mm/ 9.5mm

Socket size

W:160D:125H:55 / About 1kg

Dimension / Weight

Measuring joint
Recommend buffer accessories

SJ-50, SJ-10K

Measuring joint

SJ-10

AC/DC adaptor
Exclusive receipt case
An inspection report, a proofreading certificate, a traceability system figure

Do not use for measurement of impact tool. Do not apply more than the specified torque.
SJ joint

About an adapter (measurement joint SJ)

There is no decomposition of the joint depended for rewinding too much.

Since the adapter attached is the coil spring compression system of the
conventional system, you can use it by the conventional management method.
Moreover, the worries about disassembly of the adapter twisted for returning
this adapter too much with special structure etc. are absolutely none. You can
use it in comfort. (PAT)
A bit (it attaches to a tester) can also be used.
According to the model of driver, wearing of various bits is possible.

(1) If it equips with screw thread parts, it can measure, with the bit of
use attached. In breakage of a screw thread head etc., screw thread
parts are only exchanged.
(2) Since Bit Plug Mouth Can be Detached and Attached, according to
Model of Driver, Bit is Exchangeable.

Please check the newest information and the details

of each product in a homepage. URL http://www.cedar.co.jp

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.
SUGISAKI METER CO.,LTD.

03Y1

Management of various torque wrench torque drivers

DIS-IP series
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions
change. It is not necessary to reset up a maximum value
and a minimum value one by one like former.

The main features

Yes-no decision
Average calculation
Data storage is 800 affairs.
A convenient functional setup of a setup of a measurement start value etc.
Data output at real time (every about 1/180 seconds).
USB terminal data output
It is a rechargeable battery drive, the installation to the spot is also easy.
By the auto power OFF, It prevents forgetting to turn off the power.
One-touch zero adjustment
An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. It is very convenient for a
continuous check.
The operation torque of a QL type and pre set type wrench driver can read measured value
correctly in peak down mode (P-D).
SUGISAKI METER CO.,LTD.

03Y1

Specification
Form

DIS-IP05

Measurement range

2.0500m Nm
0.0205 kgfcm
0.0204.5 lbfin

DIS-P5

DIS-P50

DIS-P200

DIS-P500

0.0205 Nm
0.2050 kgfcm
0.2045 lbfin

0.2050 Nm
2.0500 kgfcm
2.0450 lbfin

2.0200 Nm
202000 kgfcm
201740 lbfin

2.0500 Nm
205000 kgfcm
204500 lbfin

Accuracy

0.5% (499 or less digit3digit)

Display

The 4 figures digital display of LCD

The measurement
direction

CW-CCW (right and left)

P-P
T-R
P-D
C

Mode

The highest value of load is hold-displayed

A display also changes with load change.
Load catches and displays the moment included in descent from a rise.
Load torque value is outputted every about1/180 second.

clearance

It is a display clearance in set-up time.

(0.1 - 3.0 sec)

A success or failure
judging function

High and low value are measurement within the limits, and can be set up.
Five-set preservation is possible.

The Maximum, the

minimum, and the
average value

Displays, and output the data number, the maximum, the minimum, and the average value of the measured
value

Data memory counts

800 data

Auto-power-off

After the neglect during 10 minutes

Data output

ASCII format (baud rate 19200)

Power supply

Ni-Cd chargeable battery 1.2V5cells 700mAh

Charge time / use time

Charge about 3 hour /, continuation about 12-hour use

indicator size/ weight

100W105D33H (It does not contain by the projection thing.) /

357g

Code length

Standard 1m (there are automatic machines no less than 4m as an option.)

Accessories

AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure

Form

IP05

IP5

IP50

IP200

IP500

40

50

60

80

41.2

63

78

99

10

10

15.5

60

90

110

140

50

74

90

116

(Three division)

4.5

6.5

8.3

10.5

6.35

9.5

12.7

19

189g

632g

1.8kg

3.5kg

(Socket intuition affinity)

weight

Detection machine outside

figure

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]
The contents of a catalog may change specification and a design without a preliminary announcement.

SUGISAKI METER CO.,LTD.

13Y1

To management of the bolting torque of automatic and a half automatic line

DIS-IPS series
Since the detector is small, it is incorporable into an automatic machine.
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions
change. It is not necessary to reset up a maximum value
and a minimum value one by one like former.

Everyday check of an electric driver can be performed.

Since various information is displayed on a display board, it is very intelligible.
The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output

Every about 1 / 180 seconds

The taking-in software of data can download from a homepage.

SUGISAKI METER CO.,LTD.

13Y1

Specification
Form

DISIPS20C

DIS-IPS5C

Measurement range

0.2020 Nm

0.0205 Nm

Accuracy

0.5% (499 or less digit3digit)

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Mode

Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

clearance

It is a display clearance in set-up time.

(0.1 - 3.0 sec)

High and low value are measurement within the limits, and can be set up.
Five-set preservation is possible.

A success or failure
judging function
The Maximum, the
minimum, and the average
value

Displays, memory and output the data number, the maximum, the minimum, and the
average value of the measured value

Data memory counts

800 data

Auto-power-off

After the neglect during 10 minutes

Data output

ASCII format (baud rate 19200)

Power supply

Ni-Cd chargeable battery 1.2V5cells 700mAh

Charge time / use time

Charge about 3 hour /, continuation about 12-hour use

indicator size/ weight

100W105D33H (It does not contain by the projection thing.) / 357g

Fixed Attachment
Attachment Cube
20 M4/M5/M6/M8
20*20*20 (M2.6/3/4/5/6 )

Accessories

20 joint

10 joint
AC/DC adaptor

Result of calibration , Certification on calibration , Traceability system figure

Detector outside dimension

10 joint

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.

SUGISAKI METER CO.,LTD.

13Y1

A separate type digital torque driver

DIS-RL series
A detection machine is small and it is a light weight,
To management of small torque
Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions
change. It is not necessary to reset up a maximum value
and a minimum value one by one like former.

Since various information is displayed on a display board, it is very intelligible.

The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output

Every about 1 / 180 seconds

The taking-in software of data can download from a homepage.

SUGISAKI METER CO.,LTD.

13Y1

Specification
Form

DIS-RL005

DIS-RL05

DIS-RL2

DIS-RL6

Measurement range

0.2050 mNm
2.0500 gcm

2.0500 mNm
0.0205 kgfcm
0.0204.5 lbfin

0.0102 Nm
0.1020 kgfcm
0.1017.4 lbfin

0.106 Nm
1.060 kgfcm
1.054 lbfin

Accuracy

0.5% (499 or less digit3digit)

Display

The 4 figures digital display of LCD

measurement direction
Mode
clearance
A success or failure
judging function
Maximum, minimum,
and average value
Real-time output

CW-CCW (right and left)

Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
It is a display clearance in set-up time. (0.1 - 3.0 sec)
High and low value are measurement within the limits, and can be set up.
Five-set preservation is possible.
Displays, memory and output the data number, the maximum, the minimum, and the
average value of the measured value
Load torque value is outputted every about1/ 180 second.

Data memory counts

Data output

800 data
ASCII format (baud rate 19200)

Power supply

Ni-Cd chargeable battery 1.2V5cells 700mAh

Charge time / use time

indicator size/ weight

Charge about 3 hour /, continuation about 12-hour use

100W105D33H (It does not contain by the projection thing.) /
bit4 Dcut (+) #00/#0

Accessories

bit 4(+) #0/#1

530g

bit 6.35HEX (+) #1/#2

An exclusive case
AC/DC adaptor
Result of calibration , Certification on calibration , Traceability system figure
RL05 (RL005 differ in the form of a bit holder part)

Detector outside
dimension
RL2/RL6

SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.
SUGISAKI METER CO.,LTD.

E1371

Digital torque Wrench

DIW-15/20/75/120

Various functions Display section one apparatus

Yes-no decision conditions etc. can save five channels.
.. A channel is only changed even if bolting conditions change.
It is not necessary to reset up a maximum value and a minimum value one
by one like former.
Channel change

It is not necessary to change each setting.

Since a newly developed (PAT.P)

Wrench head portion rotates about 300 degrees,

measurement of any angles is the front of a display
board.

Ergonomic, light weight, rugged metal construction

Wrench head swivels 300
Peak, Real Time and Peak Down measuring mode (selectable)
800 data memory
Programmable High and Low set points with both audible beep and Green/ Red
LED indicator for uniform torque tightening or GO/NO GO testing
Both CW and CCW operation
USB output (ASCII format)
Runs on internal Ni-MH batteries (12 hour use)
CW step less one-way clutch adapter (DIW-20/75/120 only), AC charger and
carrying case included.
SUGISAKI METER CO.,LTD.

E1371

Specification
DIW-15

DIW-20

DIW-75

DIW-120

N/m

0.2015

0.2020

0.2075

2.0120

kgf/cm

2.0150

2.0200

2.0750

201200

lbf/in

2.0130

2.0174

2.0651

201040

MODEL
Accuracy
guarantee
range

Reading 0.5%
(199 or less
digit1digit)

Accuracy
Display

Reading 0.5%
(199 or less
digit1digit)

Reading 0.5%
(499 or less digit3digit)
The 4 figures digital display of LCD

Measurement direction
PP
TR
Measurement
PD
Mode
C
A success or failure
judging function
The Maximum, minimum,
and the average value
Data memory counts
Data output

CW-CCW (right and left)

peak to peak The highest value of load is hold-displayed.
track A display also changes with load change.
peak-down
Load catches and displays the moment included in descent from a rise.
Real-time Output
Load torque value is outputted every about1/160 second.
High and low value are measurement within the limits, and can be set
up. Five-set preservation is possible.
The data number, the maximum, the minimum value, and the average
value of memory data are displayed.
800 data

Setup of count
Power supply
Charge time / use time

ASCII format (baud rate 19200)

If the set-up time comes, measurement value will be automatically
cleared in 0.0~3.0 seconds (0.5s interval).
1 to 99 count (count in a clockwise direction)
Ni-MH chargeable battery 1.2V4cells 800mAh
Charge 5 hour /, continuation about 12-hour use

Auto-power-off

After the neglect during 10 minutes

auto clear time

Bit / Socket part

6.35

Weight (about)

430g

9.5
470g

12.7
620g

830g

One-way socket
Accessories
(one piece each)
Option

Exclusive charger
Result of calibration document
Certification on calibration document / Traceability system figure
When outputting data, the USB cable (mini B) is needed.

Please check the newest information and the details

of each product in a homepage. URL http://www.cedar.co.jp
SUGISAKI METER
CO.,LTD.
URL http://www.cedar.co.jp
E-mail [email protected]

The contents of a catalog may change specification and a design without a preliminary announcement.

SUGISAKI METER CO.,LTD.